48 LED TV
your new 48" FHD LED TV. TV set Stand Screws(supplied) M4X20 6PCS Adapter Batteries 1
The parts TV set Stand Screws(supplied) M4x20 6PCS Installation Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV. Put the stand to the neck of the TV set as shown below. Attach the stand with the supplied screws. Screws(supplied) M4x20(6PCS) 400 X 400 2
DTV,ATV,AV,SCART,YPBPR,HDMI1,HDMI2,HDMI3,PC,MEDIA.
Remote Control FreeView UK Sat Switch to DVB-S mode* Picture Sound Channel Feature Setup
Remote Control DTV ATV AV SCART YPBPR HDMI1 HDMI2 HDMI3 PC MEDIA
NETWORK Headphone out 1/2/3 8
Headphone out Headphone out
NETWORK Headphone out 10
NETWORK ÎÚ ª ß± ø ß ± ªÆ ± ª à ߱ ªª ª Æ ª ø ø ± ª Ú Installation Guide 1/5:Select the OSD Language German English Spanish French Italian Move OK Next Installation Guide 2/5:Select the Country. ƪ ª æ ± ± ª ƪ ± ª ± Ʊ ± øæ ª ø ø ± ºªÚ à Ʊ ª ª ß± ± ª ß± Æ ª ±Æµ ± ª ± ø º ª ø ø ø øæ ª à ø ª Ú ± ± ª ªø ß Î ª ª ª Ú UK NewZealand Arab Estonia Hebrew Move MENU Preview OK Next Installation Guide If you complete all the options, then press OK button to begin auto tuning OSD Language English Country UK Environment Home Network Setup.. Tune Type DTV+ATV Installation Guide 5/5:Select the tune type. DTV+ATV DTV ATV Installation Guide 4/5:Network Setup. Please make sure the wired lan cable or wireless key is connected.then press Start button to configure network setting. Press skip to configure later.you can also access network setting in the Setting menu. Start Skip Installation Guide 3/5:Select the Environment Home High Performance MENU Preview OK Start EXIT Quit Move MENU Preview OK Next Move MENU Preview OK Next Move MENU Preview OK Next 12
DTV, ATV, AV, SCART, YPBPR, HDMI, VGA, Media. YPBPR 22 / 13
DTV Channel Tuning ATV Channel Tuning Program Edit OAD Signal Information Software Update(USB) DTV Channel Tuning ATV Channel Tuning Program Edit OAD Signal Information Software Update(USB) Data : 0 Programme(s) 14
DTV Channel Tuning 482MHz Data 0 To search analogue channel by entering parameters manually. Press the buttons to then press the button to confirm. Select ATV manual search item to enter air channel manual search in ATV source and the user operation interface as following. ATV Channel Tuning This item is disabled. Select a TV system for searching 15
ATV 1 C-02 2 S-44 3 S-02 4 C-04 5 C-12 ATV ATV ATV ATV 6 C-69 16
Allows you ti choose the option OAD From time to time we may release new firmware to improve the running of the television (on air download) Auto Tuning DTV Channel Tuning ATV Channel Tuning Program Edit OAD Software Update(OAD) OAD SCAN Off Signal Information Software Update(USB) OK Enter MENU Return EXIT Quit sub menu option and then press the button to display Signal Information 17
Press the button and then press the buttons to select the menu. Press the or buttons and then press the buttons to select the following picture options and then press the button. Picture Mode Contrast Brightness Color Sharpness Tint Aspect Ratio Color Temperature Picture Standard 50 50 50 50 50 16 : 9 Natural Movie User Ecohome (for User mode) (for User mode) (for User mode) (for User mode) Press the buttons to cycle among aspect ratio: Auto / 4:3 / 16:9 Full /Zoom1 /Zoom2 /Cinema/Just scan and then press the button to confirm. 18
This selection will detect the resolutionof the HDMI signal and display an image. with the same number of pixels This selection will detect the resolution of the HDMI signal and display an image. with the same number of pixels Cool / Warm Standard / Auto 19
Allows you to adjust your TV audio settings. Sound Mode Treble Bass Balance Auto Volume Surround sound AD Switch AD Volume Sound 50 50 Off Off Off Off 30 User ( for user mode) ( for user mode) Turn on/off the surround sound function by selecting On or Off. Off, 20
The application menu displays all available smart options. iplayer Facebook 21
USB output: DC 5V 500mA 22
23
Press Meenu Close Panel Press Meenu 24
Press Meenu 25
Allows you to set up a variety of feature options. Press the button and then press the buttons to select the menu. Time Lock Press the or buttons and then press the buttons to select the following feature options and then press the button. Time Lock Time Clock Off Time On Time Sleep Time Time Zone No Action Auto Standby Daylight Saving Time 07:07 Off Off On London GMT 4 hours On T Wh (On,Off) if it s On, it ll be an hour earlier than the GMT. If Time Zone is set to Auto, it s not available. 26
Lock Lock Lock System Set Password Block Program Parental Guidance Hotel Setting On On Cancel Cancel 27
28
display the selected country Lock Option Option OSD Language Primary Audio Language Secondary Audio Language Primary Subtitle Language Secondary Subtitle Language Country Hearing Impaired CI Information English English English English English UK Off Irdeto Access IRDETO-MAIN HDMI CEC function setting HDMI CEC function switch Auto Turn Off function switch Press to display Device List If you are unsure if your modified settings are correct and you want to revert back to Factory settings then activate the Restore to default option. This will not effect your currently tuned channels or set passwords. Auto Adjust Press Menu and use button to PC Setting. You can adjust the Horizontal Pos, Vertical Pos, Size, Phase of the picture, or auto adjust by selecting "Auto Adjust" H Position V Position Size Phase 50 50 50 50 29
Press the Menu button and then press the button to select the Network Setting menu. Press the buttons to select from the following options and then press the OK button Wi-Fi Press [OK] key to enter the settings of the wired network: Manually set the IP of the wired network information, or to automatically obtain the IP information of thewired network Manual state is selected; the Auto state is not optional MAC Address 00 : 30 : 1b : ba : 02 : db Displays the MAC address of the motherboard. Not selectable After setting, press [OK] button to connect, the connection is successful you receive the following message: If the setting is not completed or the connection fails, "Wired network setting not complete. Internet connected Fail!" Prompt appears. The Wireless connection status is displayed on the screen as below. 30
Press [OK] key to enter the wireless network settings: Show detailed information of the selected network. a) if it is on a secure wireless network, the press [OK] key will appear the following menu: b) if it is on a non-encrypted wireless network, the press [OK] key will appear the following menu: b) after entering the password and not encrypted connection procedure is complete there will be two prompt menu: Left success, failure right: 31
Note: Delete any scheduled recordings with the RED button. 32
Speed check Select the disk which you want to record to, when there are more than two recording devices Select the amount of memory you wish to allocate to the Time shift (record live TV function) Sizs 512 MB Exit Quit Press [OK] button to format device Are you sure? YES NO Press [OK] button to check device speed. It will show the value a few minutes later. 33
34
or 35
36
37
480i 576i 1080i 1360 x 768 1920 x 1080 480i 576i Just Scan 1080i 38
48 200 122cm (48 inch) 77 112 M4 x 20 1097.5 x 644.5 x 91 1097 x 700 x 254 13.5 31