Panel-Mount with Analog RGB FLAT PANEL DISPLAY IPC-DT/M20V(PC)T 10.-inch TFT color LCD (60 x80 dots ) IPC-DT/L20S(PC)T 12.1-inch TFT color LCD (800 x600 dots ) IPC-DT/H20X(PC)T 1-inch TFT color LCD (102 x 768 dots ) T his equipment is an analog RGB signal input, col or T FT LCD f or use in combination wit h a host computer such as the CONT E C IPC Seri es or single-board comp ut er ( SBC). Features - Full-b right, wid e-angle-of -visibilit y type of liquid crystals capable of displaying up to 262,1 col ors(10inch / 12.1 inch) /16,777,216 colors(1 inch) - St andard analog RGB input f or screen. RS-22C and USB interfaces for t ouch panel. - Multiple t ouch panel configurations containing up t o eight t ouch panels are supported when usin g the USB t ouch p anel interface. - Aut o-scaling feature that resizes the input screen to the LCD do t configuration. - On-sc reen display setup menu facilitating screen adjustment - Analog t ouch panel enabling mouse emulation using driver software - Input connect or allowing ext ernal control of t urning o n/off t he backlight - Back-mounted, dedicated power supply unit [IPC- POA200 /12-01] and AC adapte r [IPC-ACAP 12-01] avail able as an option, enabling the LCD to be used with an AC power supply - Front structure with IP6-c ompliant ingress protection - St and kit for using it on a desk is prepared as an option. Option Screen protection cover - IPC-CV : 10-inch [IPC-DT/M 20V(PC)T] screen protective sheets (10 sheets) Cable - IPC-CB L-2 : RS-22 C cable for touch panel s (2m) - IPC-CB L- : RS-22 C cable for touch panel s (m) Driver - IPC-SL IB-01: Touch panel utilit y for Windows (CD- ROM ) - IPC-TPB1-DRV: Touch p anel driver for M S-DO S (FD) Others - IPC-SND-0 : Desk stand - IPC-PO A200/12-01 : +12 VDC output AC p ower supply Input : Volt a ge = 8 t o 26V AC, Current = 0.8A (T y p.) (for input volt age = 10 0V AC) Current = 0.A ( Typ.) (for input voltage = 200 VAC) Output : Volt age = 12V DC, Current = 2.A Recommendation Cable (Maker: SANWA SUPPLY INC.) - KC-V2 : RGB display cabl e(2m) - KC-V : RGB display cabl e(m) - KU20-2 H : USB c able for touch panel (2m) - KU20- H : USB c able for touch panel (m) 1
Ver.1.10 Function Specifications Specification Screen Item Assembly type Panel mounted *1 Specification IPC-DT/M20V(PC)T IPC-DT/L20S(PC)T IPC-DT/H20X(PC)T Screen size 10. inches 12.1 inches 1 inches Number of pixels 60 x 80 dots 800 x 600 dots 102 x 768 dots Display type TFT Color LCD Number of colors 262,1 colors 262,1 colors 16,777,216 colors Automatic adjustment (display positioning and scaling) and manual Screen adjustment adjustment using the front switches Brightness control Adjustment u sing the front switch or software control from the host computer Backlight control Incoming signal specification Display interface Picture signal Synchronized signal Horizontal scan frequency Vertical scan frequency Cable length which recommends mm or less *2 Touch panel Resolution 096 x 096 Detection method Touch activation force Adjustment using the front switch, software control from the host computer, or ON/OFF control via the rear-panel connector input RGB separation, Analog, Positive polarity 0.7Vp-p/7 V/H separation, TTL, Positive / negative polarity 1 to 8kHz 1 to 8kHz 1 to 60kHz 60 to 72Hz 6 to 72Hz 6 to 7Hz Analog RGB input HD-SUB 1 pin (Female) connector Resistive -layer analog method 0.N ±0.N Touch life expectancy One million repeated touches (silicon rubber load of N) Connect to the host computer using either USB* or RS-22C. Touch panel interface USB: USB1.1-compliant, TypeB Connector RS-22C: 9pin D-SUB (Male) Connector Touch panel driver IPC-SLIB-01(option) Power supply input part Power supply connector AC adapter jack Input power supply voltage DC+12V ±% -pin nylon connector for 12 VDC power supply (Back-mounted, power supply unit [IPC-POA200/12-01] available as an option, enabling input at 8 to 26 VAC) AC adapter jack for 12 VDC power supply (Power supply unit [IPC-ACAP12-01] available as an option, enabling input at to 20 VAC) Power consumption 1.A(Max.) 1.A(Max.) 1.8A(Max.) Power consumption (power save mode) 0.2A(Max.) *1 Optional desk stand IPC-SND-0 allowing desktop installation Using a cable longer than m may reduce the image quality. The cable should be as short as possible as *2 degradation in image quality may result even when the cable is m or shorter depending on the type of host computer or cable. * The touch panel USB interface is only supported on Windows XP/2000/98SE. 2
General Specifications Environment Condition Ambient operating temperature Ambient storage temperature -10 to 60ºC Ambient humidity Floating dust Corrosive gas Noise resistance Vibration resistance Shock resistance Structure Line noise Electrostatic withstanding voltages Sweep durability Fixed-vibration durability Specification IPC-DT/M20V(PC)T IPC-DT/L20S(PC)T IPC-DT/H20X(PC)T 0 to 0ºC (0ºC to 0ºC when using an IPC-ACAP12-01 (AC switching adapter)) 20% to 8%RH (20% to 80% when using an IPC-ACAP12-01 (AC switching adapter)) (No condensation allowed) Normal None AC line: 2 kv, Signal line: 1 kv (IEC0--Level, EN60--Level) (HOST: IPC-BX/M600(PCW) Power supply: IPC-POA200/12-01) Contact: kv(iec0--2level2, EN60--2Level2) Airborne: 8 kv(iec0--2level, EN60--2Level) (HOST: IPC-BX/M600(PCW) Power supply: IPC-POA200/12-01) 10 to 0 Hz/Single-side amplitude or 0.1 mm 0 to 00 Hz/2.0 G in the X/Y/Z directions for 2 minutes each (Conforming to JIS C000 and IEC68-2-6) 16.7 Hz/2 G in the X/Y/Z directions for 0 minutes each (Conforming to JIS C000 and IEC68-2-6) 10 G in the X/Y/Z directions for 11 ms; Half-sine wave (Conforming to JIS C001 and IEC68-2-27) Major dimensions (mm) 17(W) x 277(H) x (D) 70(W) x 07(H) x 8(D) 28(W) x 6(H) x 8(D) Panel cut dimensions (mm) 292±0.(W) x 22±0.(H) ±0.(W) x 281±0.(H) 98±0.(W) x 06±0.(H) Mountable panel thickness 10 mm or less (12 stud holes are required on the periphery.) Weight.kg.kg.kg Ingress protection Optical Display Specifications Front part conforming to IP6 (12 stud holes are required on the periphery.) Item Condition Specifications (2ºC Typ. Value) IPC-DT/M20V(PC)T IPC-DT/L20S(PC)T IPC-DT/H20X(PC)T Visual angle (vertical) Visual angle (horizontal) Surface brightness (at center) f = 180º 0deg deg deg f = 0º Display in 70deg deg deg CR>=10 monochrome f = +90º 70deg 60deg 60deg f = -90º 70deg 60deg 60deg Display in white 0cd/m 2 00cd/m 2 20cd/m 2 *1 Z Measurement direction ( θ = 0 o ) Left ( φ = -90 o ) θ Top ( φ = 180 o ) X Bottom ( φ = 0 o ) φ Y Module Right ( φ = 90 o ) Note! - The above optic al specif ication data shows optical c haracteri stics of t he liquid crystal in the dis play; the data does not represent the actual view on the display or its viewing angles.
Ver.1.10 IPC-DT/M20V(PC)T Dimension 7 20 17 291 1 (9.) (Maximum tapping length : mm) 7 (18.) 10. 277 20 7 2 -M TAP (Maximum tapping length:mm) 11 (Maximum tapping length:mm) IPC-DT/L20S(PC)T 1 12-M STUD 8 266 70 2 119 119 (69.7) 119 (22.) 1. 21 98 122. 07 279 98 98 2 189. -M TAP 17. IPC-DT/H20X(PC)T 1. 12-M STUD 1 8 02 (Maximum tapping length:mm) 28 96 (96.7) (22.) 17 17 17 1. 106 09.1 6 0 106 107 2 7 2.1 18 -M TAP 17.
IPC-DT/M20V(PC)T with IPC-POA200/12-01 (power supply unit) (1.) IPC-DT/L20S(PC)T with IPC-POA200/12-01 (power supply unit) 8 8 IPC-DT/H20X(PC)T with IPC-POA200/12-01 (power supply unit) (0.8) 8 8
Ver.1.10 Name of every part Front Screen & Touch panel Power LED Screen adjustment switch Right side Back Left side Analog RGB connector USB touch panel connector RS touch panel connector Backlight ON/OFF connector Dip switch Power supply connector AC adapter jack Pulse cut Cut th e display mount panel in the following dimensions. The four corners of t he solid -line rectangle define the panel cut dimensions. IPC-DT/M20V(PC)T [10.inch] Panel Cut Dimensions 292± 0. IPC-DT/H20X(PC)T [1inch] Panel Cut Dimensions and Stud Hole Positions 17 17 17 98 22 ± 0. IPC-DT/L20S(PC)T [12.1inch] Panel Cut Dimensions and Stud Hole Positions 106 107 106 06 119 119 119 98 98 98 281 12-M STUD 12-M STUD 6
Attaching the Fitting Used to Attach to the Main Unit 1. Hold the main unit from the outsid e of the panel. Panel attachment method. Re-tighten the four screws. 2. Hold the attach from the inside of the panel.. Undo the four screws. (Approximately 10 turns for a 2mm thick panel.). Clip the pawl on the sliding part of the attachment fitting into the hexagonal hole in the main unit. IPC-DT/S20L(PC)T, IPC-DT/H20X(PC)T Attach the display to the panel with a waterproof gasket (packing) inserted in between, apply M nuts to the studs (12 positions) out through the panel, then tighten the nuts to fasten the panel and the display together. Stud Nut Spring washer Even washer Panel Packing Display Note! - The maxim um mountable panel thickness is 10 mm for each model. All data subject to change without notice. 7