Issue Date: 2009-04-28 Page 1 of 3 Report Reference # E132002-A94-UL-1 COVER PAGE FOR TEST REPORT Product Category: Product Category CCN: Test Procedure: Product: Model/Type Reference: Rating(s): Power Supplies for Information Technology Equipment Including Electrical Business Equipment QQGQ, QQGQ7 Listing AC to DC Adaptor DP4012N3M, DP4012N2M DP4009N3M, DP4009N2M DP4015N3M, DP4015N2M DP4018N3M, DP4018N2M DP4024N3M, DP4024N2M DP4048N3M, DP4048N2M For Models DP4012N3M, DP4012N2M: Input:100-240 Vac, 50/60 Hz, 1.0A, 49W Max. Output:12 V, 3.33A Max For Models DP4009N3M, DP4009N2M: Output:9 V, 4.44A Max For Models DP4015N3M, DP4015N2M: Output:15 V, 2.67A Max For Models DP4018N3M, DP4018N2M: Output:18 V, 2.22 A Max For Models DP4024N3M, DP4024N2M: Output:24 V, 1.67A Max For Models DP4048N3M, DP4048N2M: Output:48 V, 0.84A Max Standards: UL 60950-1, 2nd Edition, 2007-03-27 (Information Technology Equipment - Safety - Part 1: General Requirements) CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information Technology Equipment - Safety - Part 1: General Requirements) Applicant Name and Address: ASTEC INTERNATIONAL LTD 16TH & 17TH FL, LU PLAZA, KWUN TONG, 2 WING YIP ST, KOWLOON HONG KONG Copyright 2009
Issue Date: 2009-04-28 Page 2 of 3 Report Reference # E132002-A94-UL-1 This Report includes the following parts, in addition to this cover page: 1. Specific Inspection Criteria 2. Specific Technical Criteria 3. Clause Verdicts 4. Critical Components 5. Test Results 6. Enclosures Copyright 2009
Issue Date: 2009-04-28 Page 3 of 3 Report Reference # E132002-A94-UL-1 This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the above referenced Standards. The products have been found to comply with the requirements covering the category and the products are judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on such products which comply with this Test Report and any other applicable requirements of ('UL') in accordance with the Follow-Up Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's Follow-Up Service under the indicated Test Procedure. The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety. Any information and documentation provided to you involving UL Mark services are provided on behalf of Underwriters Laboratories Inc(ULI) or any authorized license of ULI. Test Report By: Reviewed By: Steve Chiu Associate Project Engineer UL International Limited Brian Wong Project Engineer UL International Limited Copyright 2009
Issue Date: 2009-04-28 Page 3 of 34 Report Reference # E132002-A94-UL-1 SPECIFIC TECHNICAL CRITERIA UL 60950-1:2005 (2nd Edition) Information technology equipment - Safety - Part 1: General requirements Report Reference No... : E132002-A94-UL-1 Compiled by... : Steve Chiu Reviewed by... : Brian Wong Date of issue... : 2009-04-28 Standards...: UL 60950-1, 2nd Edition, 2007-03-27 (Information Technology Equipment - Safety - Part 1: General Requirements) CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information Technology Equipment - Safety - Part 1: General Requirements) Test procedure...: Listing Non-standard test method... : N/A Test item description... : AC to DC Adaptor Trademark... : EMERSON Network Power Model and/or type reference...: DP4012N3M, DP4012N2M DP4009N3M, DP4009N2M DP4015N3M, DP4015N2M DP4018N3M, DP4018N2M DP4024N3M, DP4024N2M DP4048N3M, DP4048N2M Rating(s)...: For Models DP4012N3M, DP4012N2M: Input:100-240 Vac, 50/60 Hz, 1.0A, 49W Max. Output:12 V, 3.33A Max For Models DP4009N3M, DP4009N2M: Output:9 V, 4.44A Max For Models DP4015N3M, DP4015N2M: Output:15 V, 2.67A Max For Models DP4018N3M, DP4018N2M: Output:18 V, 2.22 A Max For Models DP4024N3M, DP4024N2M: Output:24 V, 1.67A Max For Models DP4048N3M, DP4048N2M:
Issue Date: 2009-04-28 Page 4 of 34 Report Reference # E132002-A94-UL-1 Output:48 V, 0.84A Max Particulars: test item vs. test requirements Equipment mobility... : transportable Connection to the mains... : pluggable A Operating condition... : continuous Over voltage category... : OVC II Mains supply tolerance (%)... : +10%, -10% Tested for IT power systems... : Yes IT testing, phase-phase voltage (V)... : N/A Class of equipment...: Class I (earthed) for models DP4012N3M, DP4009N3M, DP4015N3M, DP4018N3M, DP4024N3M, DP4048N3M; Class II (double insulated) for model DP4012N2M, DP4009N2M, DP4015N2M, DP4018N2M, DP4024N2M and DP4048N2M Mass of equipment (kg)...: <0.5 Kg Pollution degree... : PD 2 IP protection class... : IP X0 Possible test case verdicts: - test case does not apply to the test object... : N / A - test object does meet the requirement... : Pass - test object does not meet the requirement...: Fail (acceptable only if a corresponding, less stringent national requirement is "Pass") General remarks: - "(see Enclosure #)" refers to additional information appended to the Test Report - "(see appended table)" refers to a table appended to the Test Report - Throughout the Test Report a point is used as the decimal separator
Issue Date: 2009-04-28 Page 5 of 34 Report Reference # E132002-A94-UL-1 GENERAL PRODUCT INFORMATION: CA1.0 CA1.1 Report Summary N/A CB1.0 CB1.1 Product Description AC Power Adapter intended for Information Technology Products, switch mode construction with plastic enclosure. CC1.0 CC1.1 Model Differences Models DP4048N3M, DP4024N3M, DP4018N3M, DP4012N3M, DP4009N3M and DP4015N3M are identical to each other except output ratings, transformer T1, and ratings of some non-critical components. The Model DP40XXN2M is identical to Model DP40XXN3M except for the class of production. The Model DP40XXN2M are class II production, Model DP40XXN3M are class I production. (XX can be 09, 12, 15, 18, 24, 48) CD1.0 CD1.1 Additional Information The label is a draft of an artwork for marking plate pending approval by National Certification Bodies and it shall not be affixed to products prior to such an approval. This Test Report is re-issued with the original report number: E132002-A94-CB-1 issued 2009-05-05, with CB Certificate No. (DK-15733) issued 2009-05-07 This Report were deemed to amended, due to: 1. Add model nos. - Models DP4009N2M, DP4009N3M: Input: 100-240 Vac, 50/60 Hz, 1.0 A, 49W Max. / Output: 9 V, 4.44A Max - Models DP4015N2M, DP4015N3M: Input: 100-240 Vac, 50/60 Hz, 1.0 A, 49W Max. / Output: 15 V, 2.67A Max 2. Correct TMP testing location name from "Astec Power Supply (Shenzhen) Co Ltd" to "Astec International Ltd". This Test Report is re-issued with the original report number: E132002-A94-CB-2 issued 2009-06-23, with CB Certificate No. (DK-16081) issued 2009-06-24 This Report were deemed to amended, due to: 1. Add model nos. - Models DP4018N2M, DP4018N3M: Input: 100-240 Vac, 50/60 Hz, 1.0 A, 49W Max. / Output: 18 V, 2.22A Max - Models DP4024N2M, DP4024N3M: Input: 100-240 Vac, 50/60 Hz, 1.0 A, 49W Max. / Output: 24 V, 1.67A Max - Models DP4048N2M, DP4048N3M: Input: 100-240 Vac, 50/60 Hz, 1.0 A, 49W Max. / Output: 24 V, 0.84A Max 2. Add alternate Output Cord style 1185. 3. Correct Transformer manufacturer from Emerson (E209189) to Astec Internation Limited
Issue Date: 2009-04-28 Page 6 of 34 Report Reference # E132002-A94-UL-1 (E94225) CE1.0 CE1.2 CE1.3 CE1.4 CE1.5 CE1.7 Technical Considerations The product was submitted and evaluated for use at the maximum ambient temperature (Tma) permitted by the manufacturer s specification of: 40 C at full load, 60 C at half load. The means of connection to the mains supply is: Pluggable A The product is intended for use on the following power systems: IT, TN The equipment disconnect device is considered to be: Appliance inlet The product was investigated to the following additional standards: EN 60950-1:2006 (which includes all European national differences, including those specified in this test report). CE1.8 The following accessible locations (with circuit/schematic designation) are within a limited current circuit: Secondary Output CE1.13 The following are available from the Applicant upon request: Installation (Safety) Instructions / Manual