PROMAX NEWSLETTER Nº 22 TV EXPLORER HD series: H.264 / MPEG-4 AVC picture CV-100: Optical LNB adapter for TV EXPLORER MO-370: ISDB-T/T B modulator DIGITAL To TV: for Broadcast and TV Distribution PROMAX-27: Cable TV analyser with IPTV & VoIP QoS FTTH networks: Complete range for FTTH installation and certifying
DSS
TV EXPLORER HD SERIES 3 High definition TV analyser TV EXPLORER HD+ High resolution Spectrum Analyser with direct access keys DVB-T2, DVB-T/H, DVB-C and DVB-S/S2 Video decoding: MPEG-2, MPEG-4 H.264 for 1080i, 720p and 576i resolutions Audio decoding: Dolby Digital Plus, HE-AAC, AAC and MPEG-1/2 Video formats: SD (standard definition) and HD (high definition) Screen formats: 16:9 and 4:3 Constellation diagram HDMI interface CAM module (Conditional Access) for encrypted channels TS-ASI input and output Constellation Diagram for all DVB systems (DVB-T2 and DVB-S2 included) MER by carrier DVB-T2 and DVB-T Optical LNB adapter for TV EXPLORER CV-100 The CV-100 is an optical to RF adapter to allow the compatibility of TV and Satellite analysers with the new optical LNBs: Full RF band for IF satellite, terrestrial and CATV DC output for optical LNB supply Selectable 20 db RF attenuator (High/Low) Wavelength input from 1100 to 1600 nm Selectable 20 db attenuator (High/Low) DC output bypassed from RF output connector DC (12 V) TV & SATELLITE ANALYSER CV-100 O. F. OPTICAL LNB
4 TV EXPLORER HD SERIES High definition TV analyser TV EXPLORER HD ISDB-T ISDB-T/TB, DSS, DVB-C, QAM Annex A & B and DVB-S/S2 Video decoding: MPEG-2, MPEG-4 H.264 for 1080i, 720p and 576i resolutions Audio decoding: Dolby Digital Plus, HE-AAC, AAC and MPEG-1/2 Video formats: SD (standard definition) and HD (high definition) Screen formats: 16:9 and 4:3 Constellation diagram HDMI interface CAM module (Conditional Access) for encrypted channels TS-ASI input and output
BROADCAST 5 ISDB-T modulator MO-370 High frequency resolution (in steps of 1 Hz) Multi-path channel simulator High MER CNR generator DVB-T2 available The MO-370 is an ISDB-T/T B modulator for general purpose that easily fits in 19 racks. Either of the two serial MPEG TS-ASI inputs can be used to modulate the COFDM signal. It is able to work with any incoming bitrate even though this is strictly lower than the ISDB-T/T B specification s value. The MO-370 can be configured to generate any of the transmission modes listed in the DTMB specification, plus several test modes. This product is also available for the new evolution of the digital terrestrial television standard, the DVB-T2. ISDB-T (DVB-T2 version also available) High frequency resolution (in steps of 1Hz) High MER output signal Modes : Mode 1 (2k), Mode 2 (4k), Mode 3 (8k) Guard intervals: ¼, 1/8, 1/16, 1/32 Code rate: 1/2, 2/3, 3/4, 4/5, 7/8 Constellations: DQPSK, QPSK, 16-QAM, 64-QAM Multi-path channel simulator with Up to 6 echoes of variable parameters Possibility to simulate both static and dynamic multi-path scenarios Noise generator with settable C/N Ratio Easy front panel configuration DIGITAL TO TV for Broadcast and TV Distribution Digital To TV (DTTV) is a TV distribution headend with DVB-T (DTT) or IP outputs. It is able to convert any analogue or digital video source to DVB-T or IP. The DTTV is an ideal solution for large hospitality installations such as hotels, convention centers, hospitals, or ships. It allows relocating the spectrum, adding the off-air DTT channels received locally, encoding video-audio channels, etc. DVB-T MODULATOR DVB-S transmodulator to DVB-T DVB-S/S2 receiver (CAM cards reader to decode encrypted services) VIDEO/AUDIO encoder (Four Video/Audio Stereo inputs) IP streamer DVB-T combiner Control unit for up to 7 modules, front panel keys and Ethernet interface for remote control
6 CABLE Cable TV analyser with IPTV & VoIP QoS PROMAX-27 The PROMAX-27 includes all the functions of its predecessors, adding longer battery operating time thanks to the use of new Li+ battery technology, and offering brand new features to help cable TV installers to better perform challenging installation and maintenance works in modern networks. Network optimisation: QoS DOCSIS / EuroDOCSIS protocols Dedicated menus for UGS, rtps, nrtps MAX HOLD function Integrated spectrum analyser High cable modem output power TILT function Wide MER measuring range Constellation diagram IPTV QoS analyser TILT function Test signal generator for coaxial cable RP-110B The RP-110B is a test signal generator to certificate coaxial cable in all the bands used for coaxial cable: CATV and SMATV. Six pilots with selectable frequency and level Pilots frequency range from 5 to 2150 MHz Upstream, Downstream (CATV/UHF) and IF Sat Output level independent for each pilot and variable from 80 to 110 dbµv in 1 db steps. Frequency resolution: 25 khz. User interface in several languages. USB to PC connection for firmware updating and to configure frequencies and levels. Attenuation test compatible with TV EXPLORER field meters
FTTH EQUIPMENT 7 FTTH analyser PROLITE-77 The PROLITE-77 is an instrument optimized for the analysis, installation and maintenance of fiber optic networks based on GPON architecture, in other words, networks based on technology FTTX / PON that provide speed over 1 Gbps. Simultaneous measurements on three wavelengths (1310, 1610 nm - Upstream, 1310, 1490 and 1550 nm -Downstream) Pass-through between the transmission centre and the client, (allows full communication while performing the measurements) Visual Fault Locator included BURST measurement function for the upstream signal (1310 nm) Data transfer to a computer via USB Protected optical connectors Selective optical power meter for FTTH-xPON PROLITE-67 MODE 1: Wavelength selective measurements Simultaneous measurements for the three wavelengths (1310/1490/1550 nm) Power level analysis with Pass / Fail indication. MODE 2: Optical power measurements on active networks xpon and RFoG Attenuation test Visual fault locator Red laser at 650 nm with universal connector User interface in several languages USB connection for PC Triple wavelength laser source PROLITE-105 The PROLITE-105 is a triple laser source that can be used for testing FTTx networks. It generates 1310 nm for the Upstream channel and 1490 and 1550 nm for the Downstream. These light sources could be modulated for wavelength identification purposes with tones of 270 Hz in the case of 1310 nm, 1 khz on 1490 nm and 2 khz for 1550 nm. Triple laser source for FTTx Wavelengths of 1310, 1490 and 1550 nm available simultaneously Wavelength identification tones Simultaneous and sequential modes for measurements with non selective power meters like PROLITE-65 1310, 1550 and 1625 nm as an option.
8 TV EXPLORER SERIES TV EXPLORER TV Analysers series TV EXPLORER HD ISDB-T TV EXPLORER HD ATSC TV EXPLORER HD TV EXPLORER HD+ US TV EXPLORER II TV EXPLORER II+ TV EXPLORER HD LE TV EXPLORER HD DTMB TV EXPLORER TV EXPLORER II LCD size 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 5.5 LCD aspect ratio 16:9 16:9 16:9 16:9 16:9 16:9 16:9 16:9 16:9 4:3 Visible LCD under direct sunlight DVB-T Terrestrial DVB-T2 HD Terrestrial ATSC Terrestrial ISDB-T Terrestrial DTMB Terrestrial DVB-C Cable Cable QAM annex A&B DVB-S Satellite DVB-S2 HD Satellite DSS Satellite Analogue TV Analogue FM Constellation Diagram Channel MER by carrier Merogram and Spectrogram AUTO ID (auto identifying) and EXPLORER (band scanning) Spectrum analyser Automatic reference level for Spectrum Analyser mode Reports & Internet automatic updates Echoes detection Echoes dynamic analysis IF Satellite test Cable TV: return path (5 MHz) Cable TV: 1 GHz Encrypted channels (common interface) Video stream recorder and player Spectrum / Constellation / Measurements screen captures Dolby Digital Plus decoder MPEG-4 H.264 decoder Input /Output ASI-TS connection Output HDMI connection Real time clock USB memory connection NetUpdate 3 software free free free free free free free free free free Hard transport case (soft carrying bag always included) promax@promaxelectronics.com Included Optional www.promaxelectronics.com DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGES WITHOUT PRIOR NOTICE. 03/11. 0 IP4606