Datasheet Large one to five color daylight visible indicator with flashing input control Intense levels of light output for areas with high ambient light - even outdoors All models have flashing input control Models are available with up to five colors in one device Rugged IP-rated design to 0 V dc operation Models Model No. of s s Input Connection K90DLGPQ K90DLRPQ K90DLYPQ K90DLBPQ Green Red Yellow Blue PNP K90DLWPQ K90DLGNQ White Green Integral -pin M/Euro-style male K90DLRNQ Red K90DLYNQ K90DLBNQ K90DLWNQ Yellow Blue White NPN Model No. of s s Connection Input K90DLGRPQ Green, Red K90DLGYRPQ Green, Yellow, Red K90DLBGYRPQ Blue, Green, Yellow, Red K90DLWBGYRPQ White, Blue, Green, Yellow, Red K90DLGRNQ Green, Red K90DLGYRNQ Green, Yellow, Red K90DLBGYRNQ Blue, Green, Yellow, Red K90DLWBGYRNQ White, Blue, Green, Yellow, Red Integral -pin M/Euro-style male Integral -pin M/Euro-style male Integral -pin M/Euro-style male Integral -pin M/Euro-style male PNP NPN Integral quick disconnect models are listed; a mating cordset is required (see Accessories on page ). To order the 0 mm (.9 in) PVC cable with QD model, replace Q with QP in the model number, for example, K90DLGRPQP. To order the m (. ft) cable models, omit the suffix Q in the model number, for example, K90DLGRP. Original Document 99 Rev. C December 0 99
Specifications Supply Voltage and Current to 0 V dc ma maximum at V dc ma maximum at 0 V dc Supply Protection Circuitry Protected against reverse polarity and transient voltages Input Response Time ms maximum Adjustments. Hz flash rate via flash input wire Light Characteristics Typical Wavelength or Temperature Typical Intensity Red nm lumens Yellow 90 nm lumens Green nm lumens Blue 0 nm lumens White 00 00 K lumens Connections Integral -pin M/Euro-style male ; Integral - pin M/Euro-style male ; 0 mm ( in) PVC cable with a -pin M/Euro-style male ; 0 mm ( in) PVC cable with a -pin M/Euro-style male quick disconnect (QD); or m (. ft) unterminated PVC-jacketed cable depending on the model s to colors, depending on the model Only one color can be on at a time. The higher color number overrides the lower color number. Environmental Rating IEC IP; Enclosure UL Type X, Vibration and Mechanical Shock All models meet Mil Std. 0 requirements. Method 0A (vibration: 0 Hz to 0 Hz max., double amplitude 0.0 inch, maximum acceleration 0G). Also meets IEC 9-- requirements: 0G ms duration, half sine wave. Operating Conditions 0 C to +0 C ( 0 to + ) Certifications Construction Base and dome: Polycarbonate Dimensions All measurements are listed in millimeters [inches], unless noted otherwise. Quick Disconnect Models Cabled Models mm [. ] mm [. ] M0 x. M x 0 mm [0.9 ] M0 x. 0 mm [0.9 ] / - NPT 90 mm [. ] 90 mm [. ] / - NPT www.bannerengineering.com - Tel: +--- P/N 99 Rev. C
Wiring -pin PNP Input -Pin NPN Input Key C C C 0 V dc C C C 0 V dc = Brown = White = Blue = Black = Gray Gray wire (flashing input) -pin PNP Input -Pin NPN Input Key C C C C C Not used 0 V dc C C C C C Not used 0 V dc = White = Brown = Green = Yellow = Gray = Pink = Blue = Red Red wire (flashing input); the green wire is not used. P/N 99 Rev. C www.bannerengineering.com - Tel: +---
Accessories Cordsets -Pin Threaded M/Euro-Style Cordsets Single Ended Model Length Style Dimensions Pinout (emale) MQDC-0. 0.0 m (. ft) Typ. MQDC-0 MQDC- MQDC-0. m ( ft). m ( ft) 9. m (0 ft) Straight M x ø. MQDC-0RA MQDC-RA MQDC-0RA. m ( ft). m ( ft) 9. m (0 ft) Right-Angle M x ø. [0."] Typ. [."] 0 Typ. [."] = Brown = White = Blue = Black = Gray -Pin Threaded M/Euro-Style Cordsets with Open-Shield Model Length Style Dimensions Pinout (emale) MQDCS-0 MQDCS-. m ( ft). m ( ft) Typ. MQDCS-0 MQDCS-0 9. m (0 ft). m (0 ft) Straight M x ø. MQDCS-0RA. m ( ft) MQDCS-RA MQDCS-0RA MQDCS-0RA. m ( ft) 9. m (0 ft). m (0 ft) Right-Angle M x ø. [0."] Typ. [."] 0 Typ. [."] = White = Brown = Green = Yellow = Gray = Pink = Blue = Red Elevated Mount System Model eatures Components SA-M0 - Black Polycarbonate SA-M0C - Gray Polycarbonate Streamlined black PC or Gray PC thread cover Covers M0 thread on the light base Mounting hardware included www.bannerengineering.com - Tel: +--- P/N 99 Rev. C
Model eatures Components Polished 0 Stainless Steel Black Anodized Aluminum Clear Anodized Aluminum SOP-E-0SS 0 mm ( in) long SOP-E-00SS 00 mm ( in) long SOP-E-0A 0 mm ( in) long SOP-E-00A 00 mm ( in) long SOP-E-0AC 0 mm ( in) long SOP-E-00AC 00 mm ( in) long Elevated-use stand-off pipe (½ in. NPSM/DN) Polished 0 stainless steel, black anodized aluminum, or clear anodized aluminum surface ½ in. NPT thread at both ends Compatible with most industrial environments SOP-E-900SS 900 mm ( in) long SOP-E-900A 900 mm ( in) long SOP-E-900AC 900 mm ( in) long SA-EM0 - Black Acetal Streamlined black acetal or white UHMW mounting base adapter/cover Connects between ½ in. NPSM/DN pipe and 0 SA-EM0C - White UHMW mm (-/ in) drilled hole Mounting hardware included Pipe Mounting lange Model eatures Construction SA- or use elevated stand-off pipes (½ in, NPSM/DN) M mounting hardware and nitrile gasket included Die-cast zinc base with black paint /- NPSM 0 x ø. ø ø0 oldable Mounting Brackets Model eatures Construction SA-B or use with / inch stand-off pipes Black polycarbonate /- NPSM SA-BC Stainless steel hardware Gray polycarbonate 0 Ø0 x Ø LMB Sealed Right-Angle Brackets Model Description Construction LMB0RA LMB0RAC Direct-Mount Models: Bracket kit with base, 0 mm adapter, set screw, fasteners, o-rings, and gaskets Black polycarbonate Gray polycarbonate LMBERA Pipe-Mount Models: Bracket kit with base, ½- pipe adapter, set screw, fasteners, o-rings, and gaskets. or use with stand-off pipe (listed and LMBERAC sold separately) Black polycarbonate Gray polycarbonate Sun Shield K90DS Use for enhanced visibility in direct sunlight conditions Polycarbonate P/N 99 Rev. C www.bannerengineering.com - Tel: +---
Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU O ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY O MERCHANTABILITY OR ITNESS OR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE O PERORMANCE, COURSE O DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY OR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS O PROITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING ROM ANY PRODUCT DEECT OR ROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. or the most recent version of any documentation, refer to: www.bannerengineering.com. Banner Engineering Corp. All rights reserved