PRODUCTION RELEASE & REVISION REV DESCRIPT'N/BUYER DWG No PARTS No. BY CHK DATE 50303770 M.J.KWON 14-07-14 Instruction Menual Mega Analog Bullet camera 148+/-5)mm Weatherproof IR Bullet Camera HDUI-N11DN(P)V2C2/Nobrand 2 2.MATERIAL: 3.COLOR: BLACK 105(+/-5)mm ITEM 전자 50303770 UNLESS OTHERWISE SPECIFIED APPROVALS DATE ALL DIMENSIONS ARE IN MM. - TOLERANCE LABEL +/- 3 MANUAL +/- 5 GUIDE +/- 5 K.H.JUNG 14-07-14 MATERIAL CHKED 2 M.J.KWON 14-07-14 COLOR DRAWN 14-07-14 3 14-07-14 강영구 J.Y.LIU DESCRIPTION/MATERIAL PARTS LIST TITLE SIZE A4 REV. SCALE DO NOT SCALE A QTY
Instruction Menual Mega Analog Bullet camera Weatherproof IR Bullet Camera
FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC INFORMATION : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. CE COMPLIANCE STATEMENT WARNING : This is a Class A poduct. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. 2
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5.. Do not block any ventilat ion openings. Install in accord ance with the manufacturer`s instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 7. Only use attachments/accessories specified by the manufacturer. 8. Use only with the ca rt, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 9. CAUTION - THESE SERVICING IN STRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. 10. Use satisfy clause 2.5 of IEC60950-1/UL 60950-1 or Certified/Listed Class 2 power source only. 11. Indoor use only. EXPLANATION OF GRAPHICAL SYMBOLS 3
5 CONTENTS & PACKAGE 6 BASE INSTALLATION 6 7 17 18 18 18 4
1/3" 1.3M 1/3" Auto and manual white balance modes (ATW/AWC/Manual/AWB) Day & Night (ICR) :Auto / Color / BW 42EA, 40 5
Sunshield bolt Sunshield Sunshield Manual Camera Sunshield bolt Accessory Screw x 3ea 6
BACKLIGHT WHITE BAL SENS-UP D-WDR <BACKLIGHT> WDR BLC HSBLC <WHITE BAL> ATW AWC->SET INDOOR OUTDOOR MANUAL AWB <DAY&NIGHT> <> SHARPNESS LSC D-EFFECT DIS D-ZOOM SMART D-ZOOM DEFECT DET CAM TITLE MONITOR CVBS CROP VIDEO OUT LANGUAGE VERSION FACTORY 7
1) 2) LENS DC BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO MANUAL LENS BACK LIGHT WHITE BAL DAY&NIGHT ATW AUTO It D-WDR and DEFOG function of the camera. AGC, SENS-UP, BRIGHTNESS, 1/50000, x2 ~ x30 AGC Adjust the Auto Gain Control level. 0-15 3) SENS-UP Select the Digital Slow Shutter level., AUTO (x2 ~ x30) BRIGHTNESS Adjust the BRIGHTNESS level. 0-100 D-WDR Select the Digital WDR. ON, DEFOG POS/SIZE GRADATION DEFAULT ON, Adjust the window position & size Off, Low, Middle, High Initialize the setting values < > MODE LENS DC BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO SHUTTER AGC SENS-UP BRIGHTNESS D-WDR DEFOG AUTO l 15 l 30 8
BACKLIGHT The BACKLIGHT menu is used to the ability to expand the dynamic range and to prevent back lighting from the image. 1)WDR 2)BLC Select the Dynamic Range level. * When WDR is ON, D-WDR, D-ZOOM, SMART D-ZOOM and DIS function can not turn on. Prevents such a back light effect to secure a clear image under All illumination environments. Adjust the size of Back Light Compensation area. GAIN AREA DEFAULT Select the BLC gain Low, Middle, High Adjust the window position & size Initialize the setting values 3)HLMASK Mask the high light zone with specific color & level. SELECT Select the HLMASK area AREA1 - AREA4 DISPLAY Adjust the HLMASK area window position & size LEVEL Select the HLMASK level 0 ~ 100 MODE All Day, Night DEFAULT Initialize the setting values. < BACKLIGHT > LENS DC BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO WDR GAIN LOW WDR SET 0 BLC GAIN MIDDLE AREA DEFAULT HLBLC SELECT AREA DISPLAY ON LEVEL l 30 MODE ALL DAY BLACK MASK ON DEFAULT 9
WHITE BALANCE The screen color can be adjusted by using the Auto White Balance function. It compensates for deviations in the white color caused by changes in the color temperature of the light source so that the colors are reproduced correctly. 1)ATW 2)AWC->SET 3)INDOOR 4)OUTDOOR 5)MANUAL 6)AWB Automatically adjust color temperature. Automatically readjust only by pressing AWC SET. Set the color temperature to 3200 K Set the color temperature to 6300 K Manual mode. User can change Red and Blue gain value manually. BLUE RED 0 ~ 100 0 ~ 100 Automatically extended range of color temperature adjustment. < WHITE BALANCE > MODE LENS DC BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO MANUAL BLUE I 50 RED I 50 10
. CDS DAY&NIGHT mode are changed according to the brightness of the image. Use only when the camera is installed in a dark place but the camera is viewing a bright place. When used in a normal installation, hunting may occur. BURST ON, IR SMART LEVEL 1~15 AREA Adjust the window position & size. < DAY&NIGHT > MODE LENS DC BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO D&N AUTO DELAY I 5 D N (CDS) I 70 N D (CDS) I 40 D&N B&W BURST IR SMART ON ON 11
The menu provides the ability to adjust the SHARPNESS, LSC, D-EFFECT, DIS, D-ZOOM and SMART D-ZOOM functions of the camera. 1) SHARPNESS Adjust the SHARPNESS level. 0-15 2) LSC Select the lens Lens Shading Compensation. ON, 3) D-EFFECT FREEZE Select real or still mode ON, MIRROR Select, MIRROR, V-FLIP, ROTATE NEG. Select Negative image mode ON, 4) DIS Select the Digital Image Stability ON, 5) D-ZOOM Adjust the Digital Zoom level. x1.0 - x62.0 * When D-ZOOM is ON, SMART D-ZOOM and DIS function can not turn on. 6) SMART D-ZOOM Adjust the Smart Digital Zoom area, level, sensitivity and time. * When D-ZOOM is ON, D-ZOOM and DIS function can not turn on. SELECT Select the Smart D-zoom Area AREA1, AREA2 DISPLAY Select the Smart D-zoom Area display ON, SENSITIVITY Adjust the Smart D-zoom Sensitivity 0-60 D-ZOOM Adjust the Digital Zoom level x1.0 - x62.0 TIME Adjust time level 0-15 (sec) LENS DC BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO SHARPNESS I 8 LSC D-EFFECT DIS D-ZOOM SMART D-ZOOM <SMART D-ZOOM> SHARPNESS I 8 LSC D-EFFECT DIS D-ZOOM SMART D-ZOOM SMART D-ZOOM SELECT DISPALY SENSITIVITY D-ZOOM TIME DEFAULT AREA1 ON I 60 x2.8 I 3 12
1) DNR 2D 3D SMART NR LEVEL 2) MOTION SELECT DISPLAY SENSITIVITY MOTION VIEW DEFAULT 3) PRIVACY SELECT DISPLAY COLOR TRANS DEFAULT Select Digital Noise Reduction. ON, ON, ON, (Sensitivity 0-100) Adjust the 3DNR level 0-100 Detects the Motioned Object in the image. ON, Select the Motion area AREA1 - AREA4 Adjust the Motion area window position & size Adjust the Motion sensitivity level 0-60 Select the Motion view ON, Initialize the setting values Hide an area you want to hide on the screen. Select the privacy zone AREA1 - AREA8 Adjust the Privacy window type, position & size, INV., MOSAIC, COLOR Select the privacy zone color 0-15 Select the privacy zone transparency 0-3 Initialize the setting values 4) DEFECT DET Compensates for bad pixels. LIVE DPC Select the Live DPC mode, ON, AUTO STATIC DPC ON, START Start the bad pixels correction LEVEL Select the Static DPC level 0-60 SENS-UP Select the Sens-up level x2 - x30 AGC Select the AGC level 0-8 < > LENS DC BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO DNR MOTION PRIVACY DEFECT DET 13
<> LENS DC BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO DNR MOTION PRIVACY DEFECT DET <DNR> DNR MOTION PRIVACY DEFECT DET DNR 2D 3D ON ON <MOTION> DNR MOTION PRIVACY DEFECT DET MOTION SELECT DISPLAY SENSITIVITY MOTION VIEW DEFAULT AREA1 ON 60 ON < PRIVACY> DNR MOTION PRIVACY DEFECT DET PRIVACY SELECT AREA1 DISPLAY COLOR COLOR 2 TRANS. 3 DEFAULT < DEFECT DET> DNR MOTION PRIVACY DEFECT DET DEFECT DET LIVE DPC STATIC DPC AUTO ON START LEVEL SENS-UP AGC STATIC DPC I 4 x8 0 DEFECT DET CLOSE THE IRIS THEN PRESS SET KEY DEFECT DET WAITING... 14
The menu provides the ability to adjust the CAM TITLE, RS485, MONITOR, CVBS CROP, VIDEO OUT, LANGUAGE and, VERSION functions of the camera. 1) CAM TITLE Maximum of 15 characters are allowed. 2) MONITOR LCD GAMMA ADAPT. LEVEL BLUE GAIN RED GAIN CRT BLACK LEVEL BLUE GAIN RED GAIN Select the Monitor type LCD, CRT Select the Gamma level AUTO, USER. USER+Y, 0.45-1.0 Adjust the Adaptive level 0-100 Adjust the Blue gain level 0-100 Adjust the Red gain level 0-100 Select the Black level -30 ~ +30 Adjust the Blue gain level -50 ~ +50 Adjust the Red gain level -50 ~ +50 3) CVBS CROP ON, 4) VIDEO OUT Select the video out type NTSC, PAL 5) LANGUAGE OSD menu LANGUAGE (16ea) ENGLISH etc. 6) VERSION Firmware VERSION < > If you see a part color scene out of the white is Blue, Red gain to Note adjust the color alignment. LENS DC BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO CAM TITLE MONITOR CVBS CROP VIDEO OUT LANGUAGE VERSION LCD NTSC ENGLISH 1.0 < CAM TITLE> CAM TITLE MONITOR CVBS CROP VIDEO OUT LANGUAGE VERSION LCD NTSC ENGLISH 1.0 CAM TITLE 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V WXYZ () - _ /=& : ~,. CLR POS END 15
< MONITER> CAM TITLE MONITOR CVBS CROP VIDEO OUT LANGUAGE VERSION LCD NTSC ENGLISH 1.0 LCD GAMMA ADAPT.LEVEL BLUE GAIN RED GAIN CRT BLACK LEVEL BLUE GAIN RED GAIN AUTO 100 64 66 + 0 +0 +0 The menu provides the ability to adjust the functions of the camera. 1) FACTORY Factory initialization of camera settings Select the mode, CHANGE < > LENS DC BACK LIGHT WHITE BAL ATW DAY&NIGHT AUTO FACTORY 16
MEGA ANALOG CAMERA MAX 5.8 Watts (480mA) 1/3" 1.3M Sony CMOS 1312(H) x 1069(V) 1296(H) x 1041(V) 1000 TVL NTSC / PAL Changed by OSD 42 40M OSD (Joystick Switch, Coaxial communication) SENS-UP DWDR / WDR / BLC / HSBLC AUTO, 1/60(1/50), FLK ~ 1/50,000sec 0 ~ 100 0 ~ 15 / x2 / x4 / x6 / x8 / x10 / x15 / x20 / x25 / x30 ATW / PUSH / INDOOR / OUTDOOR / MANUAL / AWB / ON 0 ~ 100 0 ~ 100 Smart IR Level 1 ~ 15 LSC (Shading) / ON Motion Detection / ON (4 zone) Privacy Masking / ON (8 Polygone) 3DNR / ON (SMART NR) D-Effect / MIRROR / V-FILP / ROTATE D-Zoom /x1.0 ~ x62 Smart D-Zoom / ON (x1.0 ~ x62 / 2 zone) DIS / ON Freeze / ON 0 ~ 15 Monitor LCD / CRT AUTO / USER / USER+Y / 0.45 ~ 1.0 / ON NTSC (60Hz) / PAL (50Hz) / ON ENG / JPN / CHN1 / CHN2 / KOR / GER / FRA / ITA SPA / POL / RUS / POR / NED / TUR / HEB / ARB Reset Video out BNC Connector Fixed mount f=2.8~12mm F1.2~360 Varifocal, ICR (D&N) 70(W)x 245mm(D) 590g 17
1/3" 2.8-12mm 2.8mm : 109 12mm : 37.8 253 93.5 238.7 82.5 77.5 1.29 lb. (0.59kg) 2.20 lb. (1.0kg) 18
PRINTED IN KOREA 50303770A