Bravo1601 Stand-alone BLE SMD Modules Datasheet (V1.0) ProMOS Co., Ltd.
Description The Bravo1601 series are the compact Bluetooth low energy (BLE) modules, built in TI_CC2640 with the high-performance of the Bluetooth low energy chipset. The Bravo1601 have been designed to the complete stand-alone modules, enabling the transfer of simple data sets between compact devices opening up a completely new class of Bluetooth applications such as Security Tag, remotely control to the smart phones and ibeacon applications, smart watches, TV remote controls, medical sensors and fitness trainers, etc. The Bravo1601 is suitable for users fast to build into the IoT devices, ProMOS also offers the different applications of APPs supporting Android and ios platforms Features Fully compliant to Bluetooth Smart (4.x low energy single mode) specifications Very few external BOM-count to create a fully functional application circuit Texas Instrument CC26xx SimpleLink TM Wireless MCU 48MHz ARM Cortex-M3 MCU core for applications with 128K flash memory for ISP 8-KB SRAM for Cache 20-KB Ultra-Low Leakage SRAM Dedicated ARM Cortex-M0 core, 4KB SRAM, and ROM for RF operations Dedicated processor and 2KB SRAM for ultra-low power sensor control Coin battery-friendly 1.8-3.8V operation Ultra Low power consumption, 6.3mA during Active-TX at 0dBM Increased modulation index providing possible range of 100m+ in open space Continuous time comparator and ultralow power analog comparator TRNG and AES-128 encryption for data encryption and authentication 4 General-Purpose Timer Modules (8 16-Bit or 4 32-Bit Timer, PWM Each)
Programmable UART, SPI, I2S, I2C, and GPIO interface 12-Bit ADC, 200-ksamples/s, 8-Channel Analog MUX and battery monitor Support for 8 Capacitive Sensing Buttons Support user-developed applications and custom profile over GATT and custom profile over GATT Integrated RF Shied can models available NCC, CE/FCC Certification: Available upon request REACH / RoHS compliant Dimensions: 15 x 20 x 1.8 mm Applications Anti-lost devices, Finding devices Remote Control and Assisted Living Wireless Keyboard and Mouse Game Pad and Game Controller HID applications Mobile phone and tablet accessory Medical and healthcare monitor Sports and Fitness equipment Proximity and Lost-prevention Key Fob RC and Interactive Toy Home/Building Automation Machine-to-Machine data transfer Remote Sensor Network Wireless Alarm and Security Automatic Meter Reading (AMR) Electronic Shelf Labeling Lighting and HAVC control
General Specifications Absolute Maximum Ratings Ratings Min. Max. Storage Temperature -40 +90 Supply Voltage VDD -0.3 V 3.9 V Recommended Operating Condition Operating Condition Min. Max. Operating Temperature range -20 +75 Supply Voltage VDD, VDDIO 1.8 V 3.8 V Operating Frequency Carrier frequency Modulation Method Parameter Description Min. Typ. Max. Units 1Mbps 2Mbps 2.4GHz 2379 to 2496 MHz, 1 MHz step GFSK, 160/250 KHz GFSK, 320/500 KHz Air transmission rate 2 Mbps RF Output Power -20-3.8 dbm RX Sensitivity @0.01% BER -95.5 dbm Current Consumption TX @ 0dBm Standard - 6.5 - ma Current Consumption RX Standard - 5.9 - ma Current Consumption Radio Off Active 1.6 3.4 - ma Current Consumption Idle LPM1 Mode - 0.5 - ma Current Consumption Standby LPM3 Mode, SRAM/CPU - 1 - ua Current Consumption Deep Sleep LPM4/5 Mode 0.5 0.1 - ua
Standard Firmwares Available Heart Rate Monitor (HRP) Blood Glucose Monitor Health Thermometer (HLP) Blood Pressure Monitor (BLP) DataExchanger (serial data transfer via GATT) Smart Lighting Control (GATT) Block Diagram Copyright 2016, Texas Instruments Incorporated
Reference Schematic
Module Outline Symbol Dimension (mm) B 1 C 7 1.2 E (pitch applies to all pins) W 15.00 H 20.00 Pins Configurations
Pin Name Type Function Usage 1 GPIO0 Digital I/O GPIO 2 GPIO1 Digital I/O GPIO 3 GPIO2 Digital I/O GPIO 4 GPIO3 Digital I/O GPIO 5 GPIO4 Digital I/O GPIO 6 JTMS Debug I/O JTAG Debug 7 JTCK Debug I/O JTAG Debug 8 JTDO Debug I/O JTAG Debug 9 JTDI Debug I/O JTAG Debug 10 VCC POWER VDD 11 VSS Power GND 12 VSS Power GND 13 VCC POWER VDD 14 RESSET Digital input Reset system ATIVE LOW 15 GPIO7 Digital/Analog I/O GPIO(ADC) 16 GPIO8 Digital/Analog I/O GPIO(ADC) 17 GPIO9 Digital/Analog I/O GPIO(ADC) 18 GPIO10 Digital/Analog I/O GPIO(ADC) 19 GPIO11 Digital/Analog I/O GPIO(ADC) 20 GPIO12 Digital/Analog I/O GPIO(ADC) 21 GPIO13 Digital/Analog I/O GPIO(ADC) 22 GPIO14 Digital/Analog I/O GPIO(ADC) 1. Typical usage is firmware dependent. Please check with standard firmware application note or your firmware designer for the actual pin definition. 2. Available in CC26xBNA versions only
Module Reflow Installation For RoHS/Pb-free applications, Sn96.5/Ag3.0/Cu0.5 solder is recommended. Profile Feature Ramp-up rate before Preheat Maximum time at Maximum peak Ramp-down rate Recommended Parameters < 2 C / second 150-200 C 60-90 seconds 40 80 seconds 230-240 C (below 250 C) < 6 C / second Order Information Size (mm) Antenna Bravo1601 13*15.9*1.8 N/A Excellences Service 1. Hardware/Firmware design services Customized modules design to the customers different casings Customized firmware design to the different applications Pre-configure the value of parameter before the shipment. 2. APPs design services ProMOS APPs freely providing to the customers Customized APPs design to the different applications 3. Casings & Package services Package case can be customized if required. I.o.T. Solutions 9.
Contact Information We hope this datasheet will be helpful to the user to get the most out of the Bluetooth modules, furthermore feedback inputs about errors or mistakable verbalizations and comments or proposals to ProMOS Corp.. For further improvements are highly appreciated. ProMOS Tech. Inc. 3A3, NO.1, Lixing 1 st Rd., Hsinchu Science Park,Hsinchu 30078, Taiwan, R.O.C. Tel: +886-3-5798308 Fax : +886-3-5798309 Email : sales@promos.com.tw Website : http:// 2016 ProMOS Tech. Inc. All Rights Reserved. Not to be reproduced in whole or part for any purpose without written permission of ProMOS Tech. Inc. Information provided by ProMOS is believed to be accurate and reliable. These materials are provided by ProMOS as a service to its customers and may be used for informational purposes only. ProMOS assume no responsibility for errors or omissions in these materials, nor for its use ProMOS reserves the right to change specification at any time without notice. These materials are provides as is without warranty of any kind, either expressed or implied, relating to sale and/or use of ProMOS products including liability or warranties relating to fitness for a particular purpose, consequential or incidental damages, merchantability, or infringement of any patent, copyright or other intellectual property right. ProMOS further does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. ProMOS shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. ProMOS products are not intended for use in medical, life-support devices, or applications involving potential risk of death, personal injury, or severe property damage in case of failure of the product. All of products designed and produced in Taiwan, and RoHS compliance ProMOS reserve all rights to this document and the information contained herein. Products, names, logos and designs described herein may in whole or in part be subject to intellectual property rights. Re-production, use, modification or disclosure to third parties of this document or any part thereof without the express permission of ProMOS is strictly prohibited. The information contained herein is provided as is. No warranty of any kind, either expressed or implied, is made in relation to the accuracy, reliability, fitness for a particular purpose or content of this document. This document may be revised by ProMOS at any time. I.o.T. Solutions 10.