Interface RF Connector with Switch, built-in interlock, DC to 3Hz MS-151NB Series Overview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight and high reliability makes it ideal for use in 2.4 Hz band wireless LAN applications. Features 1. Confirmation of complete connection Built-in interlock feature confirms fully mated condition with a "click" sensation. 2. Non-directional connection The connector can be mated in any position on a 36 axis and can rotate within the same when in use, allowing routing of the connected cable in any direction. 3. High durability uaranteed 5 insertion/removal cycles. 4. Space-saving The external dimensions of the board-mounted receptacle (5. mm high, 6.5 mm wide, 7. mm deep) makes it ideal for use in small devices. 5. Board placement with automatic equipment Packaged on tape-and-reel. Also available with a vacuum pick-up cap over each switch. 6. RoHS compliant All components and materials comply with the requirements of the EU Directive 22/95/EC. Plug can be rotated after full insertion. Receptacle Plug MS-151NB Applications PS terminals, wireless LAN modules, notebook computers, PDA, and other high frequency equipment. MS-151-C(LP) SMA Conversion Adapter For Receptacle: MS-151NB SMA Conversion Adapter For Plug: MS-151-C(LP) MS151P-HRMJ MS151J-HRMJ 125
MS-151NB Series Interface RF Connector with Switch, built-in interlock, DC to 3Hz Product Specifications Frequency range Operating temperature range Power rating Insertion loss Isolation loss 1. Contact resistance 2. Insulation resistance 3. Withstanding voltage 4. Vibration 5. Shock 6. Temperature cycle 7. Humidity 7. (Steady state) 8. Salt spray Item Specification Conditions 9. Insertion/Withdrawal forces 1. Durability 1. (insertion/ withdrawal) Materials 1 DC to 1 Hz 1 Hz to 2 Hz 2 Hz to 3 Hz 1 DC to 1 Hz 1 Hz to 2 Hz 2 Hz to 3 Hz 1 DC to 1 Hz 1 Hz to 2 Hz 2 Hz to 3 Hz 5 m ohms max. 1 M ohms min. No flashover or insulation breakdown No electrical discontinuity of 1 μs or more Contact resistance: 1 m ohms max. Insulation resistance: 1 M ohms min. Contact resistance: 1 m ohms max. No corrosions Insertion force: 1~1N Withdrawal force: 3~15N Contact resistance: 1 m ohms max. DC to 3Hz 4ç to +85ç 4W 1 ma 1 V DC 1 V AC / 1 minute Frequency: 1 to 5 Hz, single amplitude of.75 mm, acceleration of 98 m/s2 for 2 hours in each of the 3 directions Acceleration of 49 m/s 2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature: -55ç / +15ç to +35ç / +85ç / +15ç to +35ç Time: 3 / 5 max. / 3 / 5 max.(minutes) 1 cycles 96 hours at temperature of 4ç and humidity of 9% 5% salt water solution, 48 hours (at 35ç) With corresponding connector 5 cycles N.C.2dB max..4db max..6db max. -------------- --------------- --------------- 1.2dBmax. 1.4dBmax. 1.7dBmax. Receptacle MS-151NB Part Material Finish N.O.3dB.5dB 1.dB 2dB 18dB 12dB Insulator Polyamide (UL94V) --------------- Lock mating section Stainless steel Nickel plating (Termination area: old-lead plated) Outer conductor shell Phosphor bronze Nickel plating (Termination area: old-lead plated) Contact A Phosphor bronze old plating Contact C Beryllium copper old plating max. max. max. min. min. min. Plug MS-151-C(LP) Part Material Finish Cover A PC --------------- Cover B PC --------------- Ring Stainless steel Nickel plating Outer conductor shell Phosphor bronze Nickel plating Inner contact Phosphor bronze old plating Insulator Polyamide (UL 94-HB) --------------- Ferrule Stainless steel --------------- Crimp metal fitting Brass Nickel plating Bushing Polyester --------------- 126
MS-151NB Series Interface RF Connector with Switch, built-in interlock, DC to 3Hz BTypical data NORMALLY CLOSED(N.C) ~ (Not mated with the plug) : SPEC : INSERTION LOSS SPEC : ISOLATION SPEC [db] INSERTION LOSS [db].2 INSERTION LOSS.4 1.7.6 1.6.8 1.5 1. 1.4 1.3 1.2 1.1 1. DC 1. 2. 3. [Hz] OPEN(N.O) ~ (Mated with the plug) INSERTION LOSS [db] [db] INSERTION LOSS.2.4 1.7.6 1.6.8 1.5 1. 1.4 ISOLATION [db] 1 2 3 4 1.3 1.2 1.1 ISOLATION 1. DC 1. 2. 3. [Hz] 127
MS-151NB Series Interface RF Connector with Switch, built-in interlock, DC to 3Hz Receptacle BCircuit diagram BPCB mounting pattern B Not mated with the plug(n.c) Plug MS-151NB A C MS-151NB MS-151NB(1) B 358-215-9-1 358-215-9-1 Mated with the plug(n.o) Packaging 1, pieces per reel 1 pieces A C RoHS YES 2-Ø1.2(Throug hole) 3 2 2.5 1.35 1.65 2.3 Connector front edge 7.1 4.9 2-Ø2(Land) 1.8 3.6 5.2 2-Ø1 1.1.6.2 1.3 3.2 4.3 2-.55 2-.6 No conductive traces 128
MS-151NB Series Interface RF Connector with Switch, built-in interlock, DC to 3Hz BPackaging Specifications 12 Embossed tape reel packaging (1, pieces/reel) Ø1.5 4 2 1.75 Ø13 Unreeling direction MS-151 MS-151 7.5 16.4 Ø21 16 Unreeling direction BRecommended Temperature Profile Using Lead-free solder paste Peak Temperature 26ç max. Temperature(ç) 5sec. max. 26 22 2 18 1 6 to 12sec. 5 to 8sec. 7 Ø38 Ø8 Maximum temperature Peak temperature Peak temperature duration 2ç min. 15ç to 16ç 22.4 max. : 26ç : 24ç to 255ç : 5 sec. Max. : 5 to 8 sec. : 6 to 12sec. 129
Powered by TCPDF (www.tcpdf.org) MS-151NB Series Interface RF Connector with Switch, built-in interlock, DC to 3Hz Plug (24.1) (8) For Receptacle: MS-151NB MS-151-C(LP) (12.5) (5.5) 358-16-9 Termination fixture: MS-151/CF-MD, MS-151/SO-MD, MS-151/BE-MP and MS-151/CK-MP Please contact your Hirose Electric representative for information. SMA Conversion adaptors (Ø4.15) MS151P-HRMJ Packaging Applicable cable RoHS 1 1.5DS-QEHV(TA) YES 355-89-7 Packaging RoHS 1 YES For Plug: MS-151-C(LP) MS151J-HRMJ 355-88-4 Packaging RoHS 1 YES 13