4IN1 IP QAM Modulator USER S MANUAL Catalog 1. SAFETY INSTRUCTION... 1 2. SYSTEM DIAGRAM AND WORK PRINCIPLE... 1 2.1 SYSTEM DIAGRAM... 1 2.2 WORKING PRINCIPLE... 2 3 FEATURE... 3 4 SPECIFICATIONS... 4 4.1 DATA PORT... 4 4.1.2 Input data... 4 4.2 RF PORT... 4 4.2.1 RF OUTPUT PORT... 4 4.2.2 RF TEST PORT... 4 4.3 SIGNAL ENCODING... 5 4.4 NETWORK INTERFACE... 5 4.5 POWER FAILURE AUTO SAVE... 5 4.6 POWER SUPPLY... 5 4.7 WORK TEMPRATURE... 5 4.8 MECHANICAL FEATURE... 5 4.9WEIGHT... 6 5. EQUIPMENT CONNECTION... 7 5.1 DISPLAY... 7 5.2 FRONT PANEL DISPLAY... 7 5.3 REAR PANEL DISPLAY... 8 6. USER OPERATION... 8 6.1 KEY... 8 6.2 MENU OPTION... 9 6.2.1 LOCK STATUS DISPLAY... 9 6.2.2 MAIN MENU... 9 6.2.3 PRESS MENU TO ACCESS... 9 6.2.4 INPUT Setting... 9 6.2.5 Output Setting... 10 6.2.7 NETWORK SETTING... 11 6.2.8 SAVE CONFIG... 12 6.2.9 LOAD CONFIG... 12 6.2.10 VERSION NUMBER... 12 6.2.11 LANGUAGE OPTION... 12 6.2.12 ERROR INFO.... 12 6 ERROR INFO. & TROUBLE SHOOTING... 13 6.1 INDICATOR STATUS... 13 6.2 TROUBLE SHOOTING... 13 6.2.1 POWER INDICATOR OFF... 13 6.2.2 ERROR INDICATOR ON... 13 7 NMS OPERATION...
1. SAFETY INSTRUCTION Read manual carefully before use Do not open the case and touch internal components for safety and warranty Pull out power plug in case of long time standby.do not use faulty power plug or power supply to avoid fire or electric shock. Do not touch power supply with wet hands Handle with care when pulling out power plug, no touch with the wire No flammable or liquid allowed into device Do not install device in hot area or strong sunshine or dusty place. Shock-proof is a must Room with good ventilation is required Keep original packing material for future possible transportation 2. SYSTEM DIAGRAM AND WORK PRINCIPLE 2.1 SYSTEM DIAGRAM QAM Modulator consists of following modules: Data process unit converts all inputs signal into standard signal and process.these data will be further processed by QAM modulation. QAM Modulation unit modulates the TS into spectrum signal. RF modulation up-converts the IF into 87~870MHz TV channels. CPU/LCD/LED/ is for controlling the equipment and input order to equipment.
2.2 WORKING PRINCIPLE QAM is compliant with DVB-C standard. Device convert QAM signal to mpeg-2 TS, then can be processed by QAM modulation. It includes technology such as convolution, RS correction.after IF process, the output will be RF 87~870MHz which can be transmitted in HFC or MMDS network. It is widely used in digital TV head end system, data broadcasting, VOD, internet, TV conference etc. 3 FEATURES QAM Mode 16QAM 32QAM 64QAM 128QAM 256QAM Output port : 4 QAM adjacent carriers (DVB-C/QAM) on single RF port F type Input port : Gigabite Ethernet Input bit rate range :1.5~840Mbps Input sockets: 32 IP multicast over 32 different IP (Unicast or multicast) addresses or ports Output bit rate range :2~56Mbps Output signal bandwidth (BW) :1.15~8.05MHz(rolling factor 0.15) Output data symbol rate range :1~7Mbaud/s RF range :87~860MHz RF output level :85dBuV~105dBuV( step possible) 4 way TS multiplexer PCR correction PDF filtering super cache-buff PSI/SI editable 4 way Simulcrypt scrambler with 4 different CA systems simultaneously ( 4 separate ECMG and EMMG conections RF test port Alarm error display LCD display local control of all parameters Ethernet port, remote control possible using NMS 4 SPECIFICATIONS 4.1 DATA PORT 4.1.2 Input data Port: IP 1000mbps TS over IP 4.2 RF PORT 4.2.1 RF OUTPUT PORT Connector: F-head Impedance: 75Ω Output frequency: 87MHz~870MHz Output return loss: 15dB Output level:85dbuv~105dbuv( adjustable) Carrier suppression: >55dB SNR(out band ): 50dB 4.2.2 RF TEST PORT Connector: F-head Impedance: 75Ω Output level: 65dBuV~85dBuV(adjustable)
4.3 SIGNAL ENCODING Modulation: QPSK, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM Channel encoding: DVB RS encoding Modulation error rate (MER): 40dB SNR(out band): 50dB 4.4 NETWORK INTERFACE Ethernet port: IEEE802.3 ETHERNET PORT, RJ45 PORT Protocol: UDP 4.5 POWER FAILURE AUTO SAVE Automatically save when the power fails 4.6 POWER SUPPLY Voltage 90V~250VAC; Frequency 50Hz; Power consumption 25W 4.7 WORK TEMPRATURE Environment 0*C~50*C Storage -25*C~+55*C Humidity 10~75% 4.8 MECHANICAL FEATURE 44.5mm (H,1U) 483mm(W,19 ) 410mm(D) 4.9WEIGHT 5.0 kg 5. EQUIPMENT CONNECTION 5.1 DISPLAY POWER INDICATIONR STATUS DISPLAY AND ERROR DISPLAY 5.2 1 LCD Display 2 ECMG lock LED 3 EMMG lock LED 4 Error Indicator 5 Power Indicator 6 Direction arrow key 7 Confirm 8 Exit
5.3 REAR PANEL DISPLAY 1 RF test port 2 RF output port 3 IP input 4 Ethernet port 5 Power 6. USER OPERATION 6.1 KEY Right, left key: move cursor Up, down key: modify parameters Enter (ENTER): save and confirm Exit (Exit): return or cancel modification. PS: A In lock status,press ENTER then click exit to unlock B keyboard automatically lock after 60 seconds standby C In lock status press down key to check IP menu
6.2 MENU OPTION 6.2.1 LOCK STATUS DISPLAY Press arrow directional key to change parameters Enter: save and confirm Exit: lock/cancel/save status 6.2.2 MAIN MENU 6.2.3 PRESS MENU TO ACCESS 6.2.4 INPUT Settings
6.2.5 Output Setting
6.2.7 NETWORK SETTING 6.2.8 SAVE CONFIG 6.2.9 LOAD CONFIG 6.2.10 VERSION NUMBER
6.2.11 LANGUAGE OPTION 6.2.12 ERROR INFO. 7 ERROR INFO. & TROUBLE SHOOTING 7.1 INDICATOR STATUS 6 LED light indicates as below: 1 POWER means power supply green means working normally. 2 ERROR indicates error status. 3 Lock 1~4 means each input channel status. 7.2 TROUBLE SHOOTING 7.2.1 POWER INDICATOR OFF Please check power supply cable and plug 7.2.2 ERROR INDICATOR ON Device works abnormally, please check error info and process
8 NMS OPERATION User can set the parameters via NMS on computer Connect QAM to PC via RJ 45 cable 1 Click add freq node to build a frequency node 2 Then click add device to add a device. Here please select QAM modulator 3. Name the equipment and input IP address(default is 192.168.0.42), then click ok 4. After connection, you can set all parameter in software the same as front panel settings The NMS menu as below: Input data Multiplexer menu
Scrambler menu Modulator settings
Nit settings