CMA000i Optical Test System The CMA000i Optical Test System is an all-in-one test and measurement solution for network commissioning, fault location/restoration, maintenance, and DWDM spectral analysis. Combining best in class OTDR and OSA performance, modular flexibility and ease-of-use, the CMA000i is the ultimate time saving system for increasing network performance while reducing the cost of measurement. TABLE OF CONTENTS: OTDR Module Specifications 0-05 Mainframe Specifications Display VGA LCD Display (. cm (8. inch) color or 0.8 cm (8. inch) monochrome) Mainframe and OTDR Ordering Information 06 OSA Module Specifications 07 Single-mode Light Source Specifications 07 Power Meter Specifications 07 Visual Fault Locator Specifications 07 Optional Accessories 08 Floppy Drive Keyboard I/O Ports Internal Storage Dimensions (H x W x D) Weight Power Supply Battery Battery Life.5 inch/. MB floppy disk (up to 80 OTDR traces for a standard disk) Intergral alpha-numeric, external keyboard (optional) Standard: () RS- Serial, () Parallel, VGA, Mouse, and () PS/ External Keyboard Port Up to 5 OTDR traces internal Gigabytes minimum (Over 65,000 traces with hard drive option). x. x 9.5 cm (9.5 x.5 x.75 inches).9 kg (.0 lbs.) Includes mainframe, battery and module Autoswitching 00- VAC, 7-6 Hz, 8-50 VAC, 7-6 Hz, 0-5 VDC () Sealed lead acid battery pack 6 hours typical, depending on operating mode Recharge Time.5 - hours AC Power Temperature 0º C to 5º C (º F to º F) AC Power Humidity AC Power Maximum Altitude 95% RH max., non-condensing 5,0 meters (50,000 feet) Battery Temperature 0º C to 0º C (º F to 0º F) Battery Humidity Battery Maximum Altitude 95% RH max., non-condensing 5,0 meters (50,000 feet) Storage Temperature -5º C to 60º C (-º F to 0º F) Storage Humidity Storage Maximum Altitude 95% RH max., non-condensing 5,0 meters (50,000 feet) Specifications
OTDR Specifications Module 5 5 6 Emitter Type Laser Diode Laser Diode Laser Diode Center Wavelength 0 nm ±0 nm 0 nm ±0 nm 0 nm ±0 nm 550 nm ±0 nm 550 nm ±0 nm 550 nm ±0 nm Fiber Type Single-mode Single-mode Single-mode Spectral Width 0 nm: <0 nm 0 nm: <0 nm 0 nm: <0 nm (RMS) 550 nm: <0 nm 550 nm: <0 nm 550 nm: <0 nm Meets CDRH Class Requirements (Eye Safe) CFR SNR= with up to 56k averages (Typical, subtract approximately.7 db of range for 98% peak noise. Bellcore TR-TSY-00096 Issue ) Using Bellcore TR-TSY-00096 Issue (typical) Deadzones measured on -5 db reflections (typical) 5 Stored Data Points 6,000 Dynamic Range 0 nm: 0 db 0 nm: 6 db 0 nm: 0 db 550 nm: 8 db 550 nm: db 550 nm: 0 db Initial Reflective 0 nm:.0 meters 0 nm:.0 meters 0 nm:.5 meters Deadzone 550 nm:.0 meters 550 nm:.0 meters 550 nm:.5 meters Initial Non-Reflective 0 nm: 0 meters 0 nm: 0 meters 0 nm: 6.0 meters Deadzone 550 nm: meters 550 nm: meters 550 nm: 6.0 meters Linearity.0 db/db.0 db/db.0 db/db Pulsewidth 0 ns to 0 µs 0 ns to 0 µs 0 ns to 0 µs Distance Resolution 0.000 km; 0.000 km; 0.000 km; 0. meters; 0. meters; 0. meters; 0.00 kft, 0.00 kft, 0.00 kft, ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi Loss Resolution 0.00 db 0.00 db 0.00 db Distance Sampling 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, (range dependent) 5,, 8, 6 meters,, 8, 6 meters,, 8, 6 meters Distance Range //8/6// //8/6// //8/6// Setting 6/8/56 km 6/8/56 km 6/8/56 km Distance Accuracy Loss Modes Trace Compare Modes Data Acquisition Vertical Scale Settings 0.005% of distance measurement + distance resolution + index uncertainty ORL, -point, -point LSA, db/km, db/km LSA, splice, dual splice loss, reflectance Trace Overlay, Delta Trace Compare, Align, Stack Real Time, Fast Scan, Medium Scan, Slow Scan, Timed Average (user selectable) 0.5/0.5/0.5////8 db (module dependent) Horizontal Scale 0.00 km/div. to 0.8 km/div. @ km; Settings 0.00 km/div. to 57.0 km/div. @ 56 km (IOR =.5) Language Capability Dial-a-language (English, Chinese, Spanish, Portuguese, French, Russian, German, Italian, Swedish, Korean, Hungarian) Page of 8 CMA000i Optical Test System
OTDR Specifications Module 9 5 Emitter Type Laser Diode Laser Diode Laser Diode Center Wavelength 0 nm ±0 nm 850 nm ±0 nm 0 nm ±0 nm 550 nm ±0 nm 00 nm ±0 nm 550 nm ±0 nm 65 nm ±0 nm Fiber Type Single-mode Multimode Single-mode Spectral Width 0 nm: <0 nm 850 nm: <0 nm 0 nm: < nm (RMS) 550 nm: <0 nm 550 nm: <5 nm 550 nm: < nm 65 nm: < nm Meets CDRH Class Requirements (Eye Safe) CFR SNR= with up to 56k averages (Typical, subtract approximately.7 db of range for 98% peak noise. Bellcore TR-TSY-00096 Issue ) Using Bellcore TR-TSY-00096 Issue (typical) Deadzones measured on -5 db reflections (typical) 5 Stored Data Points 6,000 Dynamic Range 0 nm: db 850 nm: db 0 nm: 0 db 550 nm: 6 db 00 nm: 6 db 550 nm: 0 db 65 nm: 0 db Initial Reflective 0 nm:.0 meters 850 nm:.5 meters 0 nm:.5 meters Deadzone 550 nm:.5 meters 00 nm:.0 meters 550 nm:.5 meters 65 nm:.5 meters Initial Non-Reflective 0 nm: 0 meters 850 nm: 6.5 meters 0 nm: 7.0 meters Deadzone 550 nm: 0 meters 00 nm: 7.0 meters 550 nm: 7.0 meters 65 nm: 7.0 meters Linearity.0 db/db.0 db/db.0 db/db Pulsewidth 0 ns to 0 µs ns to µs 0 ns to 0 µs Distance Resolution 0.000 km; 0.000 km; 0.000 km; 0. meters; 0. meters; 0. meters; 0.00 kft, 0.00 kft, 0.00 kft, ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi Loss Resolution 0.00 db 0.00 db 0.00 db Distance Sampling 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, (range dependent) 5,, 8, 6 meters,, 8 meters,, 8, 6 meters Distance Range //8/6// //8/6//6 km //8/6// Setting 6/8/56 km 6/8/56 km Distance Accuracy Loss Modes Trace Compare Modes Data Acquisition Vertical Scale Settings 0.005% of distance measurement + distance resolution + index uncertainty ORL, -point, -point LSA, db/km, db/km LSA, splice, dual splice loss, reflectance Trace Overlay, Delta Trace Compare, Align, Stack Real Time, Fast Scan, Medium Scan, Slow Scan, Timed Average (user selectable) 0.5/0.5/0.5////8 db (module dependent) Horizontal Scale 0.00 km/div. to 0.8 km/div. @ km; Settings 0.00 km/div. to 57.0 km/div. @ 56 km (IOR =.5) Language Capability Dial-a-language (English, Chinese, Spanish, Portuguese, French, Russian, German, Italian, Swedish, Korean, Hungarian) CMA000i Optical Test System Page of 8
OTDR Specifications Module 5 56 57 Emitter Type Laser Diode Laser Diode Laser Diode Center Wavelength 0 nm ±0 nm 850 nm ±0 nm 850 nm ±0 nm 0 nm ±0 nm 00 nm ±0 nm 00 nm ±0 nm 550 nm ±0 nm 0 nm ±0 nm 0 nm ±0 nm 65 nm ±0 nm 550 nm ±0 nm 550 nm ±0 nm Fiber Type Single-mode Multimode and Multimode and Single-mode Single-mode Spectral Width 0 nm: < nm 850 nm: <0 nm 850 nm: <0 nm (RMS) 0 nm: < nm 00 nm: <0 nm 00 nm: <0 nm 550 nm: < nm 0 nm: <0 nm 0 nm: <0 nm 65 nm: < nm 550 nm: <0 nm 550 nm: <0 nm Meets CDRH Class Requirements (Eye Safe) CFR SNR= with up to 56k averages (Typical, subtract approximately.7 db of range for 98% peak noise. Bellcore TR-TSY-00096 Issue ) Using Bellcore TR-TSY-00096 Issue (typical) Deadzones measured on -5 db reflections (typical) 5 Wavelength dependent 6 Stored Data Points 6,000 Dynamic Range 0 nm: 6 db 850 nm: db 850 nm: db 0 nm: 6 db 00 nm: 5 db 00 nm: db 550 nm: 6 db 0 nm: db 0 nm: db 65 nm: 6 db 550 nm: db 550 nm: db Initial Reflective 0 nm:.5 meters 850 nm:.5 meters 850 nm:.5 meters Deadzone 0 nm:.5 meters 00 nm:.0 meters 00 nm:.5 meters 550 nm:.5 meters 0 nm:.0 meters 0 nm:.0 meters 65 nm:.5 meters 550 nm:.0 meters 550 nm:.5 meters Initial Non-Reflective 0 nm: 7.0 meters 850 nm: 6.5 meters 850 nm: 8.0 meters Deadzone 0 nm: 7.0 meters 00 nm: 7.0 meters 00 nm: 9.0 meters 550 nm: 7.0 meters 0 nm: 0 meters 0 nm: meters 65 nm: 7.0 meters 550 nm: meters 550 nm: meters Linearity.0 db/db.0 db/db.0 db/db Pulsewidth 0 ns to 0 µs ns to 0 µs 5 ns to 0 µs 5 Distance Resolution 0.000 km; 0.000 km; 0.000 km; 0. meters; 0. meters; 0. meters; 0.00 kft, 0.00 kft, 0.00 kft, ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi Loss Resolution 0.00 db 0.00 db 0.00 db Distance Sampling 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, (range dependent) 6,, 8, 6 meters,, 8, 6 meters 5,, 8, 6 meters 5 Distance Range //8/6// //8/6// //8/6// Setting 6/8/56 km 6/8/56 km 5 6/8/56 km 5 Distance Accuracy Loss Modes Trace Compare Modes Data Acquisition Vertical Scale Settings 0.005% of distance measurement + distance resolution + index uncertainty ORL, -point, -point LSA, db/km, db/km LSA, splice, dual splice loss, reflectance Trace Overlay, Delta Trace Compare, Align, Stack Real Time, Fast Scan, Medium Scan, Slow Scan, Timed Average (user selectable) 0.5/0.5/0.5////8 db (module dependent) Horizontal Scale 0.00 km/div. to 0.8 km/div. @ km; Settings 0.00 km/div. to 57.0 km/div. @ 56 km (IOR =.5) Language Capability Dial-a-language (English, Chinese, Spanish, Portuguese, French, Russian, German, Italian, Swedish, Korean, Hungarian) Page of 8 CMA000i Optical Test System
OTDR Specifications Module 7 76 98 Emitter Type Laser Diode Laser Diode Laser Diode Center Wavelength 550 nm ±0 nm 550 nm ±0 nm 550 nm ±0 nm 65 nm ±0 nm 65 nm ±0 nm Fiber Type Single-mode Single-mode Single-mode Spectral Width 550 nm: <0 nm 550 nm: <0 nm 550 nm: <5 nm (RMS) 65 nm: <0 nm 65 nm: <0 nm Meets CDRH Class Requirements (Eye Safe) CFR SNR= with up to 56k averages (Typical, subtract approximately.7 db of range for 98% peak noise. Bellcore TR-TSY-00096 Issue ) Using Bellcore TR-TSY-00096 Issue (typical) Deadzones measured on -5 db reflections (typical) 5 Stored Data Points 6,000 Dynamic Range 550 nm: db 550 nm: 0 db 550 nm: 50 db 65 nm: 6 db 65 nm: 0 db Initial Reflective 550 nm:.0 meters 550 nm:.0 meters 550 nm:.5 meters Deadzone 65 nm:.0 meters 65 nm:.0 meters Initial Non-Reflective 550 nm: meters 550 nm: meters 550 nm: meters Deadzone 65 nm: 7.0 meters 65 nm: 7.0 meters Linearity.0 db/db.0 db/db.0 db/db Pulsewidth 0 ns to 0 µs 0 ns to 0 µs 0 ns to 0 µs Distance Resolution 0.000 km; 0.000 km; 0.000 km; 0. meters; 0. meters; 0. meters; 0.00 kft, 0.00 kft, 0.00 kft, ft, 0.000 mi ft, 0.000 mi ft, 0.000 mi Loss Resolution 0.00 db 0.00 db 0.00 db Distance Sampling 0.5, 0.5,, 0.5, 0.5,, 0.5, 0.5,, (range dependent) 5,, 8, 6 meters,, 8, 6 meters,, 8, 6 meters Distance Range //8/6// //8/6// //8/6// Setting 6/8/56 km 6/8/56 km 6/8/56 km Distance Accuracy Loss Modes Trace Compare Modes Data Acquisition Vertical Scale Settings 0.005% of distance measurement + distance resolution + index uncertainty ORL, -point, -point LSA, db/km, db/km LSA, splice, dual splice loss, reflectance Trace Overlay, Delta Trace Compare, Align, Stack Real Time, Fast Scan, Medium Scan, Slow Scan, Timed Average (user selectable) 0.5/0.5/0.5////8 db (module dependent) Horizontal Scale 0.00 km/div. to 0.8 km/div. @ km; Settings 0.00 km/div. to 57.0 km/div. @ 56 km (IOR =.5) Language Capability Dial-a-language (English, Chinese, Spanish, Portuguese, French, Russian, German, Italian, Swedish, Korean, Hungarian) CMA000i Optical Test System Page 5 of 8
Power Meter Connector Options Select one when ordering a power meter AM-0-5 D AM-0-0 SMA 906 AM-0-5 Diamond GFS- AM-0-5 FC AM-0-50 ST AM-0-75 VFO/PFO AM-0-85 DIN AM-0-90A SC AM-0-95 E000 AM-0-00 FDDI Ordering Information CMA000i Includes: Floppy drive, operator s manual, Understanding OTDR training manual, AC charger/adapter, two batteries, carry strap, protective display cover, serial data transfer kit and choice of AC power cord (select one from below) Mainframe Selection (required) TD-XXE Select Display Option = Monochrome Display (Available for use with OTDR modules) = Color Display (Color display required for use with OSA modules) Select Hard Drive Option = No hard drive (OTDR only) = Hard drive option = Hard drive & DOS 6. option 5 = Hard drive & Windows 95 option AC Power Cord Options VFL Connector Options FC, SC, ST - fixed connector TD-685 TD-058 US/Japan AC power cord European AC power cord TD-060 TD-06 Swiss AC power cord Australian AC power cord TD-059 UK AC power cord TD-06 Italian AC power cord OTDR Module Ordering Information OTDR Connector Options Adapters for Ultra Polish UC-0-5 DIN 756 UC-0-0 D UC-0-5T FC UC-0-0T ST UC-0-55A SC UC-0-5 SMA 905/906 UC-0-0 Diamond HP HMS-0 UC-0-5 Diamond HMS-0 UC-0-50 Diamond HMS-0/A Adapters for Angle Polish UC-0-60 FC NTT UC-0-60A FC Seiko Giken UC-0-65 SC UC-0-70 DIN/HRL-0 UC-0-75 ST UC-0-80 Diamond E-000 Part Number TD-MXX XX-X VFL Module Available Enter Last Two Digits Of Module Number Select Power Meter (For OTDR modules 5, 5, 6, 9,, and 56) 0 = No power meter = 0 dbm power meter = 0 dbm power meter Select Power Meter (for OTDR modules 5, 5, 7, and 76) 0 = No Power Meter = 0 dbm InGaAs power meter = 0 dbm InGaAs power meter Note: No power meter options for module 98 Select Light Source Option 0 = No light source = Dual wavelength with only dual optical module = Single wavelength with only single optical module Note: No light source option for 98 or multimode wavelength modules Select Connector Polish For Modules = Ultra PC single-mode = Angled PC single-mode = 6.5 µm PC multimode (X modules only) 6 = 6.5 µm PC MM / Ultra PC SM (56 and 57 modules only) 7 = 6.5 µm PC MM/ angled PC SM (56 and 57 modules only) VFL-XX (FC, SC, ST - fixed connectors) Page 6 of 8 CMA000i Optical Test System
Optical Spectrum Analyzer (OSA) Specifications Model 79 only Available with 65 nm light source only Available with 0 nm light source only Specification applies to +0 dbm meter. Module 79 NI 79 Wavelength Range 50-570 nm 50-60 nm Wavelength Accuracy ±0 pm (typical) ±0 pm (typical) Resolution Bandwidth <0.05 nm <0.05 nm Power Range +0 to -70 dbm per channel +0 to -70 dbm per channel +0 to -60 dbm per channel Polarization Dependence <±0.5 db <±0.5 db Channel Table Automatically generated, Automatically generated, up to 00 channels up to 00 channels Return Loss <5 db <5 db Cyclic Time seconds maximum seconds maximum Stability ±0. db per hour ±0. db per hour Power Accuracy ±0.5 db ( C) ±0.5 db ( C) Modes of Operation Graph, table and drift modes Acquisitions Real time, average, peak hold and channel drift Language Capability English Single-mode Light Source Specifications Wavelengths Output Transmission Mode Output Fiber Optical Connector Stability Spectral Width Same as OTDR -8 dbm (minimum) CW, KHz 9/5 µm SM fiber Same as OTDR ±0. db (8 hours) Same as OTDR Power Meter Specifications Detector Type mm Ge PIN photodiode or InGaAs photodiode Range +0 to -55 dbm or +0 to -5 dbm with AM60 filter Calibrated Wavelengths 850, 0, 0, 550, 65 nm Universal Connector Yes (use AM-0-xx adapter caps) Resolution 0.0 db, 0.0% Watts Store Reference Mode Yes Accuracy ±% (±0.8 db) @ +5 dbm to -50 dbm, ±8% (±0.6 db) @ + 0 dbm to +5 dbm and @ -50 dbm to -55 dbm Linearity ±0.0 db, +5 dbm to -50 dbm Visual Fault Locator Specifications Wavelength 650 ±0 nm Output 0 dbm Transmission Mode CW or Hz Output Fiber 9/5 µm, SM fiber Safety IEC 85 Class, FDA ( CFR 00. 0 Class ) CMA000i Optical Test System Page 7 of 8
Optional Accessories (must be added as separate line item) TD-00A Hard case w/handle & wheels TD-0 CMA serial transfer data kit TD-0 Hard transit case TD-5 Display cover TD-0 Deluxe soft case TD-06 OTDR User s Manual TD-5 Soft carry bag TD-599 OSA User s Manual TD-05 Printer w/cable TD-59US US style keyboard TD-0 Tripod TD-59GE German CE style keyboard TD-09 Printer paper (5 rolls) TD-59FR French CE style keyboard TD-09 Case of paper (5 rolls) TD-59SP Spanish CE style keyboard TD-5 V lead acid battery TD-59IT Italian CE style keyboard TD-96 V DC power adapter Optional Accessories (must be added as separate line item) FiberConnect Bare Fiber Testing Adapters (Single-mode) Ultra FiberConnect--UFC FiberConnect--USC FiberConnect--UST Angled FiberConnect--AFC FiberConnect--ASC Test Fiber Boxes (XXX-XXX = Connector Style) FB-XXX-XXX-SM-00M FB-XXX-XXX-M5-00M FB-XXX-XXX-SM-K0M FB-XXX-XXX-M6-00M FB-XXX-XXX-SM-5K0M Standard fiber lengths Single-mode (SM) - 00 m, km, and 5 km Multimode (MM) - 00 m NetTest Center Green, Building 6 Rhoads Drive Utica, NY 50 USA Toll Free: 800 65 Tel: + 5 66 5000 Fax: + 5 798 08 E-mail: info@nettest.com Web: www.nettest.com Standard Connectors (SM and MM) UFC-UFC UST-UST USC-USC Additional connector styles, combinations and lengths for the Test Fiber Boxes are available upon request. FS Series Microscopes FS-00 Fiber Microscope with 00x optics FS-00C Fiber Microscope with 00x optics with coaxial illumination FS-00C Fiber Microscope with 00x optics with coaxial illumination NetTest Sales Offices Australia +6 9890 6677 Italy +9 0 95 6 Brazil +55 5505 6688 Mexico +5 5557 89 Canada + 905 79 8090 Singapore +65 60 9575 China +86 0 667 9888 Spain + 9 7 9 7 Denmark +5 7 00 Sweden +6 8 555 0 65 France + 0 08 88 88 UK + 88 9 0 Germany +9 89 99 89 0 0 USA + 978 98 800 NetTest is a leading worldwide provider of testing, monitoring and management systems across both the optical and network layers of communications networks. NetTest provides network operators, network equipment manufacturers, component manufacturers and enterprise service providers with the network testing solutions they need. ISO 9000 certified. CMA000i-Specification Sheet-Ltr 00 NetTest Inc. All Rights Reserved. Specifications subject to change without notice.