INTRODUCTION. Ordering Information. Quick Order: Order at milestek.com (Save 5%) or call Fax:

INTRODUCTION Ordering Information PHONE ORDERS AND TECHNICAL SERVICE: 1-800-524-7444 or 940-484-9400 7 a.m. to 6 p.m., Central Time, M-F, except holidays. Fax Orders: 940-484-9402 24 hours a day, 7 days a week INTERNET ORDERS: www.milestek.com 24 hours a day, 7 days a week ORDERS: Telephone, fax or mail orders welcomed. Most items are in stock; If partial shipment requested, shipping/handling charges will be added to each shipment. F.O.B. POINT: Shipping Point. Freight charges are added to invoice. PRICES: Subject to change without notice. PAYMENT TERMS: Credit Cards: Visa, MasterCard, American Express and Discover accepted. Prepayment: Money order, company or personal check (personal check will delay order about 2 weeks). Commercial Open Account: Net 30 terms extended to companies with approved credit. Open account may be set up by faxing, emailing or mailing trade and bank references. Government: MilesTek Corporation is a small business concern. Government (federal, state, county, city school districts, etc.) purchase orders are accepted with Net 30 terms. Government IMPAC Visa/Mastercard is accepted. International: Prices are in United States Dollars and F.O.B. shipping point, excluding any applicable taxes, custom duties or permit fees. Payment in Advance via one of the following methods is acceptable: 1. Bank Transfer - Wire Routing information is available by request. Please contact our Accounts Receivable department at AR@milestek.com or by phone 940-484-9400. Please add $25.00 to your wire transfer to cover our bank charge for the wire transfer. 2. Cashier's Check, Certified Check or International Money Order - Check must be payable in US Dollars. Sending check or money order via overnight courier will improve service. 3. Company Check - Check must be drawn on a US Bank and is subject to MilesTek approval of sufficient funds. WARRANTY: MilesTek warrants its products to be free from defects of workmanship and material. If any such defects occur,replacement will be made without charge to our customers. This warranty does not cover normal wear and tear, or abuse. The warranty period depends upon the product. RETURN POLICY: All returns must have MilesTek authorization with return authorization number. All returns must be made within 30 days from shipment date and will be subject to a 20% restocking fee. RMA will be issued, but shipment of products back to MilesTek is customer s responsibility. Shipping charges for returns due to MilesTek error or evaluation for defect, will be covered at MilesTek s expense. RMA will be issued along with shipping label and instructions. Products MUST be in original packaging, not be damaged or marked on in any way, and contain all original piece parts. Any items that are returned and are not in re-sellable condition will not be considered for credit. For full version of MilesTek s return policy, visit our website at MilesTek.com. TRADE MARKS: All trade marks referenced are the service marks or trademarks of their respective owners. DISPUTE RESOLUTION: It is hereby agreed and understood that any dispute, difference or disagreement of any kind whatsoever, whether statuary or contractual, which arises from the services/products provided or relates in any way to the general business relationship of the parties to this agreement, shall be, as the sole available remedy, resolved through mediation or binding arbitration, rather than litigation. Any such mediation or arbitration shall be governed by the Federal Arbitration Act and conducted in accordance with the Rules of Mediation and Arbitration. Quick Order: Instantly place items in your cart just by entering the part numbers. Multiple part number entry is supported. Just one click from anywhere on the site from the Acct/Order Management at the top of every MilesTek.com page. Stock Orders Shipped Same Day until 5 P.M. C.S.T

Easy Online Ordering INTRODUCTION Quick summary of some of our website s features: Our websiteês Cable Assembly Wizard helps you find the assembly you need Search by cable type and connector ends Create a custom-length cable assembly, and place it in your cart to purchase. Same-Day Shipping! Supports Metric (cm) or English (inch) lengths Find Adapters quickly and easily with our Adapter Wizard New homepage Quick-Order feature allows fast and easy ordering from any MilesTek catalog or milestek.com Over 10,000 products available, including products for Mil-Std-1553B, DS3 Telecom, and Ethernet Networking! Enhanced security features PCI Compliant and high-encryption keeps your sensitive information 100% secure We hope you find MilesTek.com provides the excellent experience you deserve. Save 5% off general catalog pricing by placing your order online. Inventory Search: You can find the products you need quickly and easily. Search by keyword, MilesTek part number and even by manufacturer's part number. Order Status: Our site now has a new order status function that allows customers to view the current status of any open or shipped order that was placed either over the web or over the phone, and provides customers with the ability to drill right down to the item detail level on each order. Our new order status function also allows customers to view their assigned tracking numbers for all UPS shipments, and provides a link to allow customers to directly view tracking information for these numbers through the UPS Tracking System. Account Management: We have located all the account and order management tools within one click from anywhere on our site. Just click on the Acct/Order Management link at the top of any page. Once you are logged into the site, you can change passwords, contact information, and review purchasing history. Web Order Purchasing History: View web orders you've placed by date or invoice number and go to individual orders to view all their detail. Shipping Options: We ve added the ability to select expedited shipping. Customers can also enter their own UPS or FedEx account number for their order. UPS is MilesTek s standard/preffered carrier. Shopping Menu: Navigate easily throughout our site and go directly where you need to go fast with our new shopping menu. Download Catalogs: Now you can download our latest catalogs and see our latest products even before they hit your mailbox. A More Intuitive Design: Our new stylish design is simple and easy to navigate. We've chosen colors that are easy on your eyes and page layouts that are clear and easy to follow. Technical Blogs, Videos and Information: Our new technical blog provides an interactive forum for technical discussion regarding current and relevant industry trends. Check out our new application videos for MIL-AERO/MIL-STD-1553B and DS3 Telco Central Office business applications. Technical drawings are available for many devices, cables and connectors. For Expert Customer Service, Call Our Sales Team Today! 1

INTRODUCTION The MilesTek Advantage Dear Valued Customer, For over 30 years, our commitment to quality and service as a complete connectivity solutions provider has helped MilesTek gain the trust of thousands of corporate, IT/networking, education, broadcast, telcom, houses of worship, and other end-user professionals all over the world. MilesTek would like to introduce our new 72-page 2014 General Catalog, which contains an updated offering of our top selling core products along several new product solutions. Organized sections include Networking, AV Distribution, Coaxial, Racks & Accessories, and Cable Management. We re excited to now provide even greater service and product options to our customers through our recent acquisition by L-Com. L-Com, a global designer and manufacturer of wired and wireless connectivity products, offers a wide range of solutions including cable assemblies, connectors, adapters, industrial networking components, and custom connectivity products, as well as a broad line of wireless products. We invite MilesTek customers to check out L-Com s product offering at L-Com.com. Then contact MilesTek for pricing and availability on any items that fit your application, which can be easily added to your order of MilesTek product. Our customers have come to expect more than just products they expect solutions to their project challenges and are seeking unbeatable values. We take great pride in being easy to do business with, while delivering the expertise you need with service and value you cannot find anywhere else. MilesTek service consultants are standing by to support your installation projects. Contact MilesTek today! For the very latest products and best pricing (Save 5% off general phone/catalog pricing), please continue to visit and order at MilesTek.com Technical expertise, customer service and unbeatable value that s the MilesTek Advantage. Networking... 3-15 CAT5E and CAT6 Bulk Cable Wall Plates and Jacks / Patch Cords and Panels Network Ethernet Switches / Media Converters AV Distribution... 16-54 HDMI / VGA/ DVI / Component Video Composite Video / AV Over CAT5 / Wall Plates Coaxial... 55-63 Connectors and Adapters / Bulk Cable Cable Assemblies / Tools / Racks / Panels Racks & Accessories... 64-75 Rack Enclosures / Wall Mount Racks / Rack Shelves Horizontal Managers / Ladder Racks Cable Management... 76-81 Surface Raceway System / In-Wall Raceway Ducting Tools / Cable Ties 2 Stock Orders Shipped Same Day until 5 P.M. C.S.T

CAT5E/CAT6 Bulk, RJ45 Plugs CATEGORY UTP CABLE Today's advanced fast ethernet and gigabit computer networks require CAT5E or CAT6 high-speed cabling to distribute data, voice and video. Our CAT5E cables will handle bandwidth intensive applications up to 350 MHz and beyond. The CAT6 standard addresses the need for improving the performance of twisted pair cabling to support emerging high-speed applications. The transmission parameter requirements exceed CAT5E and are specified up to 550 MHz. For complete specifications on our category cables, visit www.milestek.com CAT5E 350 MHz Solid CMR or CMP Rated 24 AWG / 4 Pair PVC 1000 PULL BOX PLENUM 1000 PULL BOX 30-50013-Black 30-50014-Black 30-50013-Blue 30-50014-Blue 30-50013-Gray 30-50014-Gray 30-50013-Green 30-50014-Green 30-50013-Orange 30-50014-White 30-50013-Red 30-50014-Yellow 30-50013-White 30-50013-Yellow PRICE PRICE $115.50 $236.25 NOTE: Due to continuing fluctuation in the cost of copper, our category UTP bulk cable pricing is subject to change without notice. NETWORKING CAT6 550 MHz Solid CMR or CMP Rated Rated 23 AWG / 4 Pair PVC 1000 PULL BOX PLENUM 1000 PULL BOX 30-60013-Black 30-60014-Black 30-60013-Blue 30-60014-Blue 30-60013-Gray 30-60014-Gray 30-60013-Green 30-60014-Green 30-60013-Orange 30-60014-Orange 30-60013-Red 30-60014-White 30-60013-White 30-60013-Yellow PRICE PRICE $172.20 $393.75 CAT5E Direct Burial Cable 24 AWG / 4 Pair Solid BC 1000 ft. PART # COLOR PRICE 30-50112 Black $215.25 COMMUNICATION CABLE Cross Connect Wire PART # DESCRIPTION 30-04024-1K Blue/White Pair PRICE $66.15 1,000 FT. ROLLS Flat Satin Plugs Flat Silver Satin Cable MilesTek Universal Crimper 30-04001-1K 4-Conductor $52.50 30-04002-1K 6-Conductor $62.40 1,000 FT. ROLLS 10-23051 RJ11, 4-Conductor $0.17 10-23052 RJ12, 6-Conductor $0.22 10-23050 RJ22, Handset $0.32 * Not compatible with AMP plugs RJ45 and RJ11 Modular Plugs 50 ø" of gold plating RJ45 Plug Boots UTP Cable Stripper/Cutter 10-23063 RJ45 8C8P 2OP Solid $0.29 10-23063-BP Bulk Pack (100) $25.20 10-23061 RJ11 4C Solid/Stranded $0.29 10-23061-BP Bulk Pack (100) $25.20 10-23062 RJ11 6C Solid/Stranded $0.29 10-23062-BP Bulk Pack (100) $25.20 PART # COLOR 10-99033 White 10-99034 Ivory 10-99035 Gray 10-99036 Black 10-99046 Red 10-99047 Yellow 10-99048 Blue 10-99049 Green 10-99050 Orange PRICE $0.21 40-12161 Frame w/ RJ45* $44.09 40-12061 RJ45 Die Set* $21.71 40-12162 Frame w/ RJ11* $44.09 40-12062 RJ11 Die Set* $21.71 40-40071 Stripper/Cutter $7.88 For Expert Customer Service, Call Our Sales Team Today! 3

NETWORKING EZ-RJ45 Plugs & Tools 3 EZ Steps to Perfect Terminations 1 Strip & prepare cable, slide conductors straight through EZ connector 2 Verify proper wiring order 3 Crimp connector & trim excess wire in one step with the EZ-RJ45 Crimp Tool! Tools, Modular Adapters/Couplers The one-piece EZ-RJ45 connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front for verifying the proper wiring order. Reducing the distance between the wire twists and contacts, electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. The crimp tool crimps and trims in one cycle. 40-40371 40-40630 10-23087 CAT5E EZ-RJ45 Plugs, 50 Pack $33.08 10-23087-100 CAT5E EZ-RJ45 Plugs, 100 Pack $65.05 10-23089 EZ-RJ11 Plugs, 50 Pack $18.74 10-23089-100 EZ-RJ11 Plugs, 100 Pack $36.70 10-23090 Shielded CAT5E/CAT6 EZ-RJ45, 50 pk $81.38 10-23090-100 Shielded CAT5E/CAT6 EZ-RJ45, 100 pk $157.50 10-23088 CAT6 EZ-RJ45 Plugs, 50 Pack $37.38 10-23088-100 CAT6 EZ-RJ45 Plugs, 100 Pack $73.45 10-99073 CAT6 Boot Blue 50 Pack $9.85 10-99074 CAT6 Boot Gray 50 Pack $9.85 10-99075 CAT6 Boot Green 50 Pack $9.85 10-99076 CAT6 Boot Yellow 50 Pack $9.85 10-99077 CAT6 Boot Black 50 Pack $9.85 40-40371 Crimp Tool $65.10 40-40630 Pro Crimp Tool $91.30 Network Installer Kit EZ-RJ45 Crimp Tool 100 EZ-RJ45 CAT5E Connectors Round Cable Cutter 12 Tray Tote Bag Universal Stripper/Cutter Replacement Blades Pro Punchdown Tool Handle Pro Punchdown Tool 110 Bit & 66 Bit 40-50288 Network Installer Kit $248.73 Modular Adapters/Couplers Uni-Network Tester This compact tester with remote tests continuity of individual wires in either automatic or manual mode. Accepts both RJ45 and RJ11 plugs. Includes BNC Adapter cables, case and 9V Battery. 40-30089 Uni-Network Tester $91.82 A B C D KEY PART# DESCRIPTION PRICE A 10-23952 CAT5e RJ45 Coupler $2.40 B 10-23941 RJ11 4C Coupler $0.37 C 10-23942 RJ11 6C Coupler $1.35 D 10-23946 CAT5e Insert Coupler $3.75 10-23948 CAT6 Insert Coupler $6.00 MilesTek Pro Punchdown Tool Integrated bit storage in handle Adjustable tension setting Ergonomic handle with cushioned grip KEY PART# DESCRIPTION PRICE A 40-40303 Punchdown Tool $26.88 B 40-40304 110 Bit $7.80 C 40-40305 66 Bit $7.88 A B C 4 Stock Orders Shipped Same Day until 5 P.M. C.S.T

MILESTEK SNAP IN JACKS For Expert Customer Service, Call Our Sales Team Today! CAT5E Jacks CAT6 Jacks RJ11 Jacks Milestek Jacks The keystone jacks are individually terminated using 110 termination method for quick installation. User instructions and basic wiring layouts for standard configuration are included. PRICE $2.76 PRICE $3.94 PRICE $2.10 Jack Terminator Tool Kit PART # COLOR 60-06524 Ivory 60-10524 White 60-16524 Red 60-19524 Blue 60-18524 Yellow PART # COLOR 60-06624 Ivory 60-10624 White 60-16624 Red 60-19624 Blue 60-18624 Yellow PART # COLOR 60-06190 Ivory 60-10190 White 60-16190 Red 60-19190 Blue 60-18190 Yellow PART # COLOR 60-25524 Off. White 60-15524 Black 60-17524 Green 60-08524 Orange 60-07524 Light Almond PART # COLOR 60-25624 Off. White 60-15624 Black 60-17624 Green 60-08624 Orange PART # COLOR 60-25136 Off. White 60-15136 Black 60-17190 Green 60-08190 Orange 60-07190 Light Almond For MilesTek CAT5E and HellermannTyton CAT5E/CAT6 Jacks This new patented product allows professionals to significantly reduce the time it takes to terminate CAT5E communication cables into standard wall jacks. In one simple action, 4 pairs of wires are terminated and the built-in blades cut off the excess wire, eliminating the need for a secondary trim step. High-grade, hardened steel frame offers superior performance and durability Ratcheted action to ensure proper, consistent termination Removable jack cradle allows for alternate lacing option Lifetime Warranty (crimper frame only). 40-50400 Jack Termination with Punchdown Head-Set For MilesTek CAT5E Jacks Only (not CAT6) and HT Jacks (RJ45FC5E, RJ45FC6) $97.23 Binding Post Modules SOLD IN PAIRS. Each pair includes one module with a red stripe and one with a black stripe. PART # DESCRIPTION COLOR PRICE 60-06137 Binding Post White $6.93 60-06152 Binding Post Ivory $6.93 60-06138 Binding Post Off, White $6.93 AV SNAP IN JACKS RCA to RCA Feedthroughs PART # JACK MODULE 60-06226 White Ivory 60-10226 White White 60-25226 White Off. White 60-06221 Red Ivory 60-10221 Red White 60-25221 Red Off. White RCA to F-Type Feedthroughs PRICE $4.01 NETWORKING 3.5 mm USB/A USB/B HDMI 60-40001 3.5mm Snap In Jack $3.94 60-40002 White USB/A F/F Mini Snap In Jack $3.29 60-40003 White USB/B F/F Mini Snap In Jack $3.29 60-40004 White HDMI F/F Snap In Jack $6.56 60-40005 Ivory HDMI F/F Snap In Jack $6.56 60-10152 BNC Insert - White $4.45 60-25197 BNC Insert - Office White $4.45 60-06197 BNC Insert - Ivory $4.45 60-15197 BNC Insert - Black $4.45 F-Type Jacks BNC PART # JACK MODULE 60-06220 Yellow Ivory 60-10220 Yellow White 60-25220 Yellow Off. White 60-06222 Black Ivory 60-10222 Black White 60-25222 Black Off. White 60-06299 Blue Ivory 60-10299 Blue White 60-25299 Blue Off. White 60-06277 Green Ivory 60-10277 Green White 60-25277 Green Off. White PRICE $3.62 PART # DESCRIPTION COLOR 60-06219 Red RCA to F Ivory 60-10219 Red RCA to F White 60-25219 Red RCA to F Off. White 60-06227 Yellow RCA to F Ivory 60-10227 Yellow RCA to F White 60-25227 Yellow RCA to F Off. White 60-06228 Black RCA to F Ivory 60-10228 Black RCA to F White 60-25228 Black RCA to F Off. White PART # COLOR 60-06191 Ivory 60-10191 White 60-25191 Off. White PRICE $1.34 Blank Fillers Sold in 10 Pack PART # COLOR 60-06192 Ivory 60-10192 White 60-25192 Off. White PRICE $2.10 5

NETWORKING Wall Plates, Surface Mount Boxes 6 MILESTEK WALL PLATES These wall plates are ideal for the installation of keystone jacks, "F" TV connectors or ST, SC fiber optic connectors, available in 1, 2, 3, 4 and 6-port or blank. Single Gang Plate Flush-Mount Wall Plates PART # DESCRIPTION 60-06501 1-Port Ivory 60-10501 1-Port White 60-25501 1-Port Off. White 60-07501 1-Port Lt. Almond 60-06502 2-Port Ivory 60-10502 2-Port White 60-25502 2-Port Off. White 60-07502 2-Port Lt. Almond 60-06503 3-Port Ivory Dual Gang Plate 60-10503 3-Port White 60-25503 3-Port Off. White PART # DESCRIPTION 60-07503 3-Port Lt. Almond 60-06144 6-Port Ivory 60-06504 4-Port Ivory 60-10144 6-Port White 60-10504 4-Port White 60-20444 6-Port Off. White 60-25504 4-Port Off. White 60-06145 12-Port Ivory 60-07504 4-Port Lt. Almond 60-10145 12-Port White 60-06506 6-Port Ivory 60-20105 12-Port Off. White 60-10506 6-Port White 60-07512 12-Port Lt. Almond 60-25506 6-Port Off. White PRICE $3.62 60-07506 6-Port Lt. Almond PRICE $0.92 Stainless Multi-Access Faceplates Single Gang Plate PART # DESCRIPTION 60-03033 1-Port 60-03034 2-Port 60-03035 4-Port 60-03036 6-Port PRICE $2.52 Dual Gang Plate PART # DESCRIPTION 60-03037 4-Port 60-03038 6-Port 60-03039 12-Port PRICE $4.15 Mounting Brackets 60-01003 1-Gang Plastic Mounting Bracket - MP1P $1.54 60-01006 1-Gang Metal Mounting Bracket - MP1S $2.07 RECESSED CABLE PLATE Use these new recessed low voltage cable plates to install low voltage cables behind your flat panel TV, your amplifier or other audio and video devices. These recessed low voltage cable plates are designed for use with Low Voltage / Data cables only. DC-45-0001-BR 1 Gang Recessed Cable Plate Brown $2.78 DC-45-0001-LA 1 Gang Recessed Cable Plate Almond $2.78 DC-45-0001-WH 1 Gang Recessed Cable Plate White $2.78 DC-45-0001-BK 1 Gang Recessed Cable Plate Black $2.78 DC-45-0002-BR 2 Gang Recessed Cable Plate Brown $3.73 DC-45-0002-LA 2 Gang Recessed Cable Plate Almond $3.73 DC-45-0002-WH 2 Gang Recessed Cable Plate White $3.73 DC-45-0003-WH 3 Gang Recessed Cable Plate Almond $6.69 DC-45-0003-BK 3 Gang Recessed Cable Plate Black $6.69 Surface Mount Boxes Surface mount boxes feature a compact low profile outline. They are ideal where internal wall access is not available. Boxes have knockouts on three sides to mate with HellermannTyton s raceway. Easy to install and can be fastened to virtually any surface. Compatible with Milestek Jacks PART # DESCRIPTION PART # 60-05211 2-Port Ivory 60-05212 2-Port White 60-05213 2-Port Office White PRICE $2.56 CAT5E Surface-Mount Jacks Category 5e surface-mount jacks are the printed circuittype, to meet 100 MHz requirements. A tie wrap attached to the circuit board provides cable strain relief. The lids are held by a screw for secure mounting. Wall plates have a double-sided, adhesive pad for mountingthey may also be screw-mounted. The single CAT5e surface-mount jack is compact, measuring 2 5 /8 w x 1 3 /4 d x 1 3 /8 h. The duplex model measures 2 5 /8 w x 2 5 /8 d x 1 3 /8 h. Ivory. 60-06193 CAT5e Single Surface-Mount $4.20 60-06194 CAT5e Duplex Surface-Mount $8.75 DESCRIPTION 60-05214 4-Port Ivory 60-05215 4-Port White 60-05216 4-Port Office White PRICE $4.22 PART # DESCRIPTION 60-05208 6-Port Ivory 60-05209 6-Port White 60-05210 6-Port Office White PRICE $7.88 Stock Orders Shipped Same Day until 5 P.M. C.S.T

CAT5E/CAT6 Patch Cords, Panels MILESTEK PATCH CORDS Perfect for distributing data, voice and video, our patch cables ensure you always have the necessary throughput to bandwidthintensive applications. Our CAT5E patch cords are tested to 350 MHz for high-speed applications. CAT6 patch cords are designed to pass 10/100/1000 Mbp traffic through a Gigabit network without latency from the physical layer. Booted to prevent unwanted network failures or cable snag during usage, and molded to help with strain relief. CAT6 Patch Cords - featuring a snagless strain relief. Gray 26-260-xxx Blue 26-261-xxx White 26-262-xxx Red 26-263-xxx Black 26-264-xxx Green 26-265-xxx Yellow 26-266-xxx Orange 26-267-xxx LENGTH (FT) 1 3 5 7 10 14 25 xxx Part # 12 36 60 84 120 168 300 PRICE $1.35 $1.95 $2.55 $3.15 $4.36 $5.85 $9.00 Replace the xxx with the needed length in inches Example: 26 260 36 = 3 ft. MILESTEK PATCH PANELS Our pre-configured RJ45 Cat5E and CAT6 patch panels are suitable for level connecting or terminal connecting. CAT5E panels are CAT6 Patch Panels 19-inch rack-mountable Multi-port modular jacks, compact size 50 microns gold-plated pin contacts Accept 22-26 AWG solid with insulation diameter of 0.4-0.64mm Used for any standard 483mm rack Plug insertion life 750cycles min Each patch panel is compatible with T568A and T568B wiring schemes CAT6 panels are fully compatible with Gigabit Ethernet Can easily be terminated with single pair or multi-pair impact tool PART # PORTS PRICE 50-44083 12 $66.00 50-44081 24 $75.00 50-44082 48 $144.00 MILESTEK WIRING BLOCKS 110 Wiring Block Kit Vertical 50-pair 110 wiring block kit has 4 & 5-pair clips, ID holder, label, and bracket. Horizontal 100 & 300-pair 110 wiring block kits have wiring blocks with legs, 4 & 5-pair clips and two ID holders with labels. PART # PORTS PRICE 50-44080 12, Vertical $75.00 50-44029 Horizontal 100-Pair 28.85 CAT5E 350 MHz Stranded EZ-Latch Snag Free Patch Cords Gray 26-250-xxx Blue 26-251-xxx White 26-252-xxx Red 26-253-xxx Black 26-254-xxx Green 26-255-xxx Yellow 26-256-xxx Orange 26-257-xxx NETWORKING LENGTH (FT) 1 3 5 7 10 14 25 xxx Part # 12 36 60 84 120 168 300 PRICE $1.05 $1.44 $1.81 $2.25 $3.00 $3.75 $6.46 Replace the xxx with the needed length in inches Example: 26-250-36 = 3 ft. CAT5E 350 MHz Stranded Conductor Non-Booted Patch Cords Gray Blue White Red 26-200-xxx 26-201-xxx 26-202-xxx 26-203-xxx Black 26-204-xxx Green 26-205-xxx Yellow 26-206-xxx Orange 26-207-xxx LENGTH (FT) 1 3 5 7 10 14 25 xxx Part # 12 36 60 84 120 168 300 PRICE $1.05 $1.44 $1.81 $2.25 $3.00 $3.75 $6.46 Replace the xxx with the needed length in inches CAT5E Front Access Patch Panels All connections from front panel Front covers hide 110 terminations 24 port model surface or rack mountable PART # PORTS PRICE 50-44026 12 $67.50 50-44027 24 $133.50 Type-66 Connecting Block Type-66 punchdown block is suitable for CAT5e and voice applications. The 89D mounting block holds the 66 block, allowing wires to be routed behind it. 50-44017 66 Punchdown Block w/cover $11.99 50-44018 Bridging Clips Bag of 25 $2.63 50-44014 89D Mounting Block $2.00 Example: 26-200-36 = 3 ft. available with 24, 48 or 96 ports. CAT6 panels are available with 12, 24 or 48 ports. CAT5E Patch Panels RJ45 Cat5E patch panels have 110 punchdown connectors. See page 69 for Hinged Panel Mounts PART # PORTS PRICE 50-44052 12, Vertical $50.00 50-44066 24 $57.00 50-44067 48 $105.00 50-44068 96 $270.00 For Expert Customer Service, Call Our Sales Team Today! 7

NETWORKING Leviton QuickPort Snap-In Modules for Voice & Data CAT5e Gigamax Jacks PART NO. COLOR LE-5G108-RI5 Ivory LE-5G108-RW5 White LE-5G108-RG5 Gray LE-5G108-RE5 Black LE-5G108-RO5 Orange LE-5G108-RL5 Blue LE-5G108-RR5 Dark Red LE-5G108-RY5 Yellow LE-5G108-RB5 Brown LE-5G108-RT5 Lt. Almond LE-5G108-RV5 Green LE-5G108-RP5 Purple LE-5G108-RC5 Crimson Red PRICE $4.70 RJ11 6C Modules PART NO. COLOR LE-41106-RI6 Ivory LE-41106-RW6 White LE-41106-RG6 Gray LE-41106-RE6 Black LE-41106-RO6 Orange LE-41106-RL6 Blue LE-41106-RR6 Dark Red LE-41106-RY6 Yellow LE-41106-RB6 Brown LE-41106-RT6 Lt. Almond LE-41106-RG6 Green LE-41106-RP6 Purple LE-41106-RC6 Crimson Red PRICE $2.91 Leviton Jacks, Wall Plates, Panels Jack Terminator Tool Kit For Leviton CAT5E/CAT6 Jacks This new patented product allows professionals to significantly reduce the time it takes to terminate CAT5E and CAT6 communication cables into standard wall jacks. In one simple action, 4 pairs of wires are terminated and the built-in blades cut off the excess wire, eliminating the need for a secondary trim step. High-grade, hardened steel frame offers superior performance and durability Ratcheted action to ensure proper, consistent termination Adjustment feature for extra leverage applications Quick-change punch sets require no tools Removable jack cradle allows for alternate lacing option Rubber-embedded handles provide extra comfort. Lifetime Warranty (crimper frame only). 8 CAT5E Patch Panels FEATURES: The panels shall feature both T568A and T568B wiring configurations, white IDC 110- punchdown modules, mounting standoffs for cable management bars, color-coded front window labeling, and a termination standoff for patch panel earthing/grounding. The panels have universal T568A and T568B wiring cards for terminations. The panels are made of 16 gauge steel, and have a black painted finish with white silk-screening. The plastic elements are fire-retardant with a UL flammability rating of 94V-0. The 110 termination on the rear of the panel follows normal installation color sequence (blue, orange, green, brown) from left to right. CAT6+ extreme RJ45 Jacks These 8-position, 8-conductor Connectors feature dual-color-coded wiring labels with both T568A and T568B wiring patterns, QuickPort compatibility, and a 110-style rear termination field for easy termination of a jack while installed in a wallplate or field-configurable panel. LE-5G596-U89 12 Port Vertical Mount $98.39 LE-5G596-U12 12 Port Rackmount $114.57 LE-5G596-U24 24 Port Rackmount $153.51 LE-5G596-U48 48 Port Rackmount $306.97 LE-5G596-U96 96 Port Rackmount $579.62 PART # COLOR LE-61110-RI6 Ivory LE-61110-RW6 White LE-61110-RT6 Lt. Almond LE-61110-RL6 Blue LE-61110-RR6 Dk Red LE-61110-RO6 Orange LE-61110-RY6 Yellow LE-61110-RV6 Green LE-61110-RE6 Black PRICE $8.48 Jack Terminator with Punchdown Head-Set For Leviton 40-50401 CAT5E Jacks (41106, 41108, 5G108) $97.23 Punchdown Head Set for Leviton CAT6 Jacks 40-50402 (61110, 5G110, 6110G) $41.08 CAT6+ extreme Patch Panels Set the bar higher for mechanical and electrical excellence with Leviton s new, craft-friendly, 110-style extreme 6+ Universal Patch Panels. These panels feature T568A and T568B wiring compatibility, white IDC 110-punchdown modules, and top-of-the-line, error-free Category 6 performance. Optimized for maximum throughput and a zero bit error rate, these panels also feature Leviton s unique "Retention Force Technology" for increased connection integrity and consistently robust performance over the life of the system. LE-69586-U89 12 Port Vertical Mount $137.24 LE-69586-U12 12 Port Rackmount $147.14 LE-69586-U24 24 Port Rackmount $225.26 LE-69586-U48 48 Port Rackmount $443.76 LE-69586-U96 96 Port Rackmount $816.74 Stock Orders Shipped Same Day until 5 P.M. C.S.T

Leviton Wall Plates, Surface Mount NETWORKING Leviton QuickPort Single-Gang Multi-Port Wall Plates Single-gang flush mount wallplates offer field-configurable flexibility in an attractive single-piece housing. A choice of 1-, 2-, 3-, 4- or 6-ports allows for a variety of configurations and future expansion if needed. The wallplates are fully compatible with all QuickPort Snap-in Modules including connectors or blank fillers. PART # PORTS COLOR LE-41080-6IP 6 Port Ivory LE-41080-6WP 6 Port White LE-41080-6TP 6 Port Lt. Almond LE-41080-4IP 4 Port Ivory LE-41080-4WP 4 Port White LE-41080-4TP 4 Port Lt. Almond LE-41080-3IP 3 Port Ivory LE-41080-3WP 3 Port White Leviton Surface Mount Housing PART # PORTS COLOR LE-41080-3TP 3 Port Lt. Almond LE-41080-2IP 2 Port Ivory LE-41080-2WP 2 Port White LE-41080-2TP 2 Port Lt. Almond LE-41080-1IP 1 Port Ivory LE-41080-1WP 1 Port White LE-41080-1TP 1 Port Lt. Almond PRICE $1.75 Compact, highly versatile surface mount housings designed especially for Leviton s QuickPort Keystone Jacks, to provide network installers with an economical yet reliable enclosure for multiple voice/data connections. Modular design allows the user to create a unique networking and/or voice solution by loading the housing with CAT 5e, CAT6, video and voice grade jacks. These housings are unloaded, connectors sold separately. Decora Wallplates Single Gang Wallplates PART NO. COLOR LE-80401-I Ivory LE-80401-E Black LE-80401-GY Gray LE-80401-W White LE-80401-T Lt. Almond PRICE $1.00 Dual Gang Wallplates PART NO. COLOR LE-80409-I Ivory LE-80409-E Black LE-80409-GY Gray LE-80409-W White LE-80409-T Lt. Almond PRICE $2.57 QuickPort Decora Multimedia Inserts Combine voice, data, audio and video in one compact, attractive Decora wallplate. Decora Wallplate Inserts offer designer style to match Leviton Decora electrical switches and outlets, with the capacity and flexibility to support high-tech communications for boardrooms or workstations. Snap-on locking cover offers convenient accessibility for quick and easy keystone installation, additions, or upkeep Screws and mounting adhesive included for permanent desktop or wall mount installation UL 94 V-0 fire rated NEC Article 800 compliant CSA certified UL listed Additional port and color styles available LE-41089-2IP Leviton 2-port Surface Mount Housing, Ivory $2.26 LE-41089-2WP Leviton 2-port Surface Mount Housing, White $2.26 LE-41089-4WP Leviton 4-port Surface Mount Housing, White $4.23 PART # DESCRIPTION LE-41642-00I 2 Port Ivory LE-41642-00W 2 Port White LE-41642-0GY 2 Port Gray LE-41642-00B 2 Port Brown LE-41642-00T 2 Port Lt. Almond LE-41642-00E 2 Port Black LE-41643-00I 3 Port Ivory LE-41643-00W 3 Port White LE-41643-0GY 3 Port Gray LE-41643-00E 3 Port Black LE-41643-00T 3 Port Lt. Almond LE-41643-00B 3 Port Brown PRICE $4.27 PART # LE-41644-00I LE-41644-00W LE-41644-0GY LE-41644-00E LE-41644-00T LE-41644-00B LE-41646-00I LE-41646-00W LE-41646-0GY LE-41646-00E LE-41646-00T LE-41646-00B DESCRIPTION 4 Port Ivory 4 Port White 4 Port Gray 4 Port Black 4 Port Lt. Almond 4 Port Brown 6 Port Ivory 6 Port White 6 Port Gray 6 Port Black 6 Port Lt. Almond 6 Port Brown For Expert Customer Service, 9 Call Our Sales Team Today!

NETWORKING LEVITON STRUCTURED MEDIA CENTERS Series 140 Structured Media Center Accommodates up to two full-width Pre-Configured Structured Cabling Panels delivering audio/video, voice and data to any room of the home or office. Positive stops on housing sidewalls prevent the enclosure from falling through studs during installation. One piece white steel unit holds full and half-width expansion modules. Can be surface mounted or recessed. Ideal for new installations or retrofits. Purchase empty or in kits with Pre-Configured Structured Cabling Panels, for easy, one-step home technology solutions. Mounting guides on the cover align screw-holes and reduce the chances of dropping during attachment. Powder-coated white cover features a ¾" overlap to hide irregular drywall cuts. Combine two or more enclosures for larger installations or future expansion. Multiple knock-outs on top & bottom facilitate cable entry & routing. PART NUMBER DESCRIPTION PRICE LE-47605- SMC-140 14' Enclosure & Cover $42.08 14W Size: 14.38"H x 14.38"w x 3.60"d Series 280 Structured Media Centers Multiple knock-outs on top, bottom, sides and back facilitate cable entry and routing from every desired room. Sturdy, one-piece white steel construction. Combine two or more enclosures for larger installations or future expansions. Holds ¼, ½ and full-width expansion modules with the ability to mount most modules vertically or horizontally. Large capacity provides multiple functionality for wired homes. Powder -coated white cover features a ¾" overlap to hide irregular drywall cuts. Mounting hooks on the cover align screw-holes and reduce the chances of dropping during attachment. Holds a broad range of current and future distribution modules, delivering audio, video, voice, data, security and more to any room of the home or office. Can be surface mounted or recessed. Ideal for new installations or retrofits. PART NUMBER DESCRIPTION PRICE LE-47605-28W SMC-280 28" Enclosure & Cover $87.81 Size: 28"H x 14.38"w x 3.60"d Leviton Structured Media LEVITON STRUCTURED MEDIA MODULES 1x6, 1x8 Coaxial Cable Distribution Modules Splits video signals. Outputs for up to 6 or 8 televisions. Provide digital cable, cable TV and other video services, via coaxial cable, to any room in the house. Die-cast housing and printed circuit board. Use with the Video Amplifier for increased signal strength. Units come with mounting bracket. Gold-flashed contacts on 2.05 GHz units provide lowest conductive resistance. PART NUMBER DESCRIPTION PRICE LE-47690-6C2 1x6 Passive Video Splitter Module (2.05 GHz) $35.77 LE-47690-8C2 1x8 Passive Video Splitter Module (2.05 GHz) $40.93 1x9 Bridged Telephone Module Operates up to 9 separate telephones with 4 separate telco lines. Printed circuit board with 10 bridged 4-pair 110 type insulation displacement connectors. Suitable for phone, fax or modem. Dimensions: 2.24"h x 6.57"w x 1.82"d. PART NUMBER DESCRIPTION PRICE LE-47689-00B 1x9 Bridged Telephone Module $46.20 CAT5E Voice and Data Module Use CAT5e patch cords to link to media distribution modules and data hubs. Use phone cords to link to telephone distribution modules. Use high-speed unshielded, twisted-pair cable to route data, phone, fax or modem signals. Printed circuit board with six CAT5e ports. Dimensions: 2.24"h x 6.57"w x 1.96"d. PART NUMBER DESCRIPTION PRICE LE-47605-C5B CAT5E Voice and Data Module $47.43 10 Stock Orders Shipped Same Day until 5 P.M. C.S.T

HellermannTyton Jacks, Wall Plates, Panels NETWORKING CAT5E Flush Jacks The MegaBand Category 5e flush modular jack was designed to meet the needs of end-users and installers. Several features have been incorporated to provide an easier and quicker installation. This system is guaranteed to have exceptional performance. CAT6 Flush Jacks The GigaBand CAT6 flush modular jack was designed to future proof installations. Its patented design uses innovative crosstalk cancellation technology. The GigaBand system will easily support emerging applications such as Gigabit Ethernet and 622 Mbps ATM. PRICE $4.60 PRICE $8.02 PART # COLOR 60-06424 Ivory 60-10424 White 60-11424 Gray 60-15424 Black PART # COLOR 60-16424 Red 60-17424 Green 60-18424 Yellow 60-19424 Blue PART # COLOR 60-08424 Orange 60-24424 Brown 60-25424 Office White 60-26424 Violet PART # COLOR 60-06324 Ivory 60-10324 White 60-11324 Gray 60-15324 Black PART # COLOR 60-16324 Red 60-17324 Green 60-18324 Yellow 60-19324 Blue PART # COLOR 60-08324 Orange 60-24324 Brown 60-25324 Office White 60-26324 Violet Flush-Mount Faceplates Snap-In Modular Multimedia Distribution Panels PART # DESCRIPTION 60-06139 1-Port Ivory 60-10139 1-Port White 60-20436 1-Port Office White 60-06140 2-Port Ivory 60-10140 2-Port White 60-20438 2-Port Office White 60-06141 3-Port Ivory 60-10141 3-Port White PART # DESCRIPTION 60-20440 3-Port Office White 60-06142 4-Port Ivory 60-10142 4-Port White 60-20442 4-Port Office White 60-06143 6-Port Ivory 60-10143 6-Port White 60-20443 6-Port Office White PRICE $1.42 Snap-in 19 modular multimedia distribution panels are made of black high-grade anodized aluminum. Unique locking feature is provided by an integrated plastic bezel within the aluminum panel that locks modules and couplers securely in place, flush with the front of the panel. Panels have numbered holes (ref. 0.57 w x 0.78 h) and all panels have rolled edges for rigidity. PART# PANEL DESCRIPTION PRICE 50-23019 1-Row 12-Ports 1-RS $38.15 50-23020 1-Row 16-Ports 1-RS $44.15 50-23021 2-Rows 12-Ports 2-RS $26.25 50-23022 2-Rows 16-Ports 2-RS $61.88 50-23023 3-Rows 16-Ports 3-RS $64.16 60-15146 Blank FIller Black $3.33 CAT5e Patch Panels The CAT5e patch panels are pre-configured in 12, 24, 48 and 96 port versions to meet the needs of nearly all customer applications. Offered with increments of 6 port modules that can be replaced if damaged during installation, the patch panels can be used for both T568A and T568B wiring configurations. 50-44048 12 Port $114.25 50-44049 24 Port $137.09 50-44050 48 Port $252.26 50-44051 96 Port $524.53 CAT6 Patch Panels Pre-configured in 12, 24 and 48 port versions to meet the needs 50-44038 12 Port $145.31 of nearly all applications. 50-44039 24 Port $213.10 The panels are offered with 50-44040 48 Port $423.79 increments of 6 port modules that can be replaced if damaged during installation. They can be used for both T568A and T568B wiring configurations. For Expert Customer Service, 11 Call Our Sales Team Today!

NETWORKING FIBER OPTIC PATCH CORDS Multi-Mode Fiber Optic Patch Cords Part # 27-500-001 (Custom Lengths Available) Part # 27-270-001 ST/ST DUPLEX 27-200-001 1 M $13.00 27-200-002 2 M $13.91 27-200-003 3 M $14.84 27-200-005 5 M $16.54 27-200-010 10 M $21.00 SC/SC DUPLEX 27-300-001 1 M $13.34 27-300-002 2 M $14.78 27-300-003 3 M $16.25 27-300-005 5 M $19.16 27-300-010 10 M $26.46 Fiber Optic Solutions ST/SC DUPLEX 27-500-001 1 M $13.26 27-500-002 2 M $14.18 27-500-003 3 M $14.82 27-500-005 5 M $15.10 27-500-010 10 M $21.14 SC/LC DUPLEX 27-270-001 1 M $15.89 27-270-002 2 M $17.33 27-270-003 3 M $18.80 27-270-005 5 M $21.71 27-270-010 10 M $24.94 ST/LC DUPLEX 27 260 001 1 M $16.94 27 260 002 2 M $17.85 27 260 003 3 M $18.80 27 260 005 5 M $20.48 27 260 010 10 M $27.56 LC/LC DUPLEX 27-250-001 1 M $18.38 27-250-002 2 M $19.85 27-250-003 3 M $21.29 27-250-005 5 M $24.20 27-250-010 10 M $31.50 Single Mode Fiber Optic Patch Cords ST/ST DUPLEX ST/SC DUPLEX SC/SC DUPLEX 27-210-001 1M $16.07 27-210-002 2M $16.80 27-210-003 3M $17.57 27-210-005 5M $19.04 27-510-001 1M $15.12 27-510-002 2M $16.20 27-510-003 3M $17.30 27-510-005 5M $18.90 27-310-001 1M $16.46 27-310-002 2M $17.20 27-310-003 3M $17.85 27-310-005 5M $19.30 (Custom Lengths Available) LC/LC DUPLEX 27-255-001 1M $20.40 27-255-002 2M $20.95 27-255-003 3M $22.05 27-255-005 5M $24.20 LC/ST DUPLEX 27-265-001 1M $21.14 27-265-002 2M $21.79 27-265-003 3M $22.58 27-265-005 5M $24.02 HDMI Over Fiber See Page 26 FIBER ENCLOSURES & ADAPTER MODULES Wall Mount Fiber Enclosures Fully enclosed and lockable wall mount enclosures Designed to support up to 4 modular adapter panels Equipped with cable management and cable routing accessories to limit bend radius and add strain relief control. The 12-port enclosure includes a rugged plastic latch to secure the door The 24-port enclosure has a door lock for the provider side and a rugged plastic latch for the user door side. PART #. DESCRIPTION PRICE 50-24024 12/16 Wall Mount Enclosure $84.75 50-24025 24/32 Wall Mount Enclosure $120.33 Rackmountable Fiber Enclosures Sliding tray for easy access to the fiber Integrated cable management Enclosures come unloaded, customize with fiber adapter modules at right. 50-24044 18/24 Fiber Enclosure 1U Unloaded $217.19 50-24045 36/48 Fiber Enclosure 2U Unloaded $240.89 50-24046 54/72 Fiber Enclosure 3U Unloaded $299.16 50-24047 72/96/144 Fiber Enclosure 4U Unloaded $366.31 Plug-In Fiber Adapter Modules 50-24017 6 ST MM/SM $34.30 50-24018 6 Simplex SC MM/SM $44.60 50-24019 3 Duplex SC MM/SM $51.57 50-24020 6 Duplex SC MM/SM $85.59 50-24021 6 Duplex LC MM/SM $66.54 50-24022 8 Simplex SC MM/SM $60.30 50-24023 8 Simplex ST MM/SM $47.80 12 Stock Orders Shipped Same Day until 5 P.M. C.S.T

Network Switches/Media Converters NETWORKING 10/100 Desktop Ethernet Switches With advantages such as, easy to Install and use, compact-sized design, and simple troubleshooting, these Fast Ethernet switches provides cost-conscious business and home users with the foundation of an integrated system of small-office / home-office networking. Provides array LED indicators, the network status can be monitored at a glance. PART # PORTS PRICE Metal Housing 90-30320 5 $37.21 Complies with 90-30321 8 $38.55 IEEE 802.3 10BaseT and 90-30322 16 $71.31 IEEE 802.3u 100Base-TX standards Automatic speed and duplex mode sensing Auto MDI/MDI-X on each port Up to 3.2G non-blocking switch fabric Up to 1K MAC address table High performance Store-and-Forward Architecture 10/100/1000 Gigabit Ethernet Switches Desktop 10/100 Rackmount Ethernet Switches PART # PORTS PRICE 90-30323 16 $74.17 Complies with IEEE802.3 90-30324 24 $94.12 10Base-T, IEEE802.3u 90-30458 48 $354.18 100Base-TX standards High performance Store-and-Forward Architecture Runt and CRC filtering Flow control (Back Pressure) support in half-duplex mode 1K MAC Address Table, automatically learning and aging Auto-MDI/MDIX on each port Fast Ethernet MM Converters Comply with IEEE802.3, IEEE802.3u 10/100Base-TX, 100Base-FX Standard Connectors: One RJ-45 (Auto-MDI/MDI-X for FT-80x series) Twisted Pair, EIA568 Support distances up to 2 km One Fiber-optic, 1310nm wavelength, connector-type Duplex mode support: Full or half-duplex mode by Auto-Negotiation Can be installed in a media converter chassis 90-30113 RJ45 to ST $93.85 90-30114 RJ45 to SC $78.45 Rackmount Providing 16 Gbps non-blocking switch fabric as well as 8K MAC Address table, these switches support 802.3x full duplex flow control and also offer wire-speed packet transfer performance without risk of packet loss. All RJ-45 copper interfaces support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ-45 Category 3, 4, 5 or above cables. MDI/MDI-X auto detection is provided for direct wire connection to any Ethernet device without requiring crossover cables. PART # PORTS TYPE PRICE 90-30144 5 Desktop $48.49 90-30474 8 Desktop $100.08 90-30148 16 Rackmount $197.68 90-30145 24 Rackmount $274.85 90-30146 48 Rackmount $825.00 Gigabit Ethernet Converters Complies with IEEE802.3z, 1000Base-SX / 1000Base-LX, IEEE802.3ab 1000Base-T 1000Base-SX interface for up to 500 meters (SC,MM) Compact in size, easy installation 1000Base-LX interface for up to 10km (SC,SM) Full-duplex supports for TP and fiber port PART # PORTS PRICE 90-30124 1000Base-T to 1000Base-SX (SC, MM) $114.10 90-30125 1000Base-T to 1000Base-LX (SC, SM) $181.21 For Expert Customer Service, Call Our Sales Team Today! 13

NETWORKING USB Cables USB Solutions A B C Part# 35-101-72 Part# 35-101-120 Part# 35-101-180 Part# 35-100-72 Part# 35-100-120 Part# 35-100-180 Part# 35-108-192 D E Part# 90-30641 Part# USB-6MF Part# USB-10MF Part# USB-12MF USB 1.1 Over CAT5E/CAT6 Solutions Extend your USB peripherals (i.e. computer keyboard, mouse or hard drive) up to 150 ft. away from the location of your computer using one CAT5/5E/6 cable. The USB signal is sent between the Local and Remote units by buffering the signal through send and receive line drivers, preserving data integrity. Active repeaters provide maximum flexibility for USB devices and are ideal for security and surveillance video, PC digital audio systems and other peripherals with USB interface that are beyond the reach of regular cables Features: Wall Plate set includes both Local and Remote Plate Extends USB signal using regular CAT5/5e/6 cable up to 150 ft. Fully compliant with USB 1.1 specification Supports any full-speed or low-speed USB devices 100% compatible with USB hubs and other devices No software driver, no power needed KEY PART# DESCRIPTION PRICE A 35-101-12 USB 2.0 A-Male to B-Male Cable, 1 ft. $1.35 A 35-101-36 USB 2.0 A-Male to B-Male Cable, 3 ft. $1.50 A 35-101-72 USB 2.0 A-Male to B-Male Cable, 6 ft. $2.10 A 35-101-120 USB 2.0 A-Male to B-Male Cable, 10 ft. $3.75 A 35-101-180 USB 2.0 A-Male to B-Male Cable, 15 ft. $4.95 B 35-100-72 USB 2.0 A-Male to A-Male Cable, 6 ft. $2.40 B 35-100-120 USB 2.0 A-Male to A-Male Cable, 10 ft. $3.30 B 35-100-180 USB 2.0 A-Male to A-Male Cable, 15 ft. $5.10 C 35-108-192 A-A Ext. 2.0 Active Cable, 16' $27.00 D 90-30641 USB/Serial Adapter A-DB9M $36.00 E USB2-6MF USB 2.0 Extension non Active A/A MF 6 ft. White $1.95 E USB2-10MF USB 2.0 Extension non Active A/A MF 10 ft. White $3.75 E USB2-15MF USB 2.0 Extension non Active A/A MF 15 ft. White $4.35 USB 1.1 Over CAT5E/CAT6 Extender/4-Port Hub 90-12201 USB UTP Hub Kit $78.17 USB 1.1 Over CAT5E/CAT6 Extender USB 1.1 Over CAT5E/CAT6 Wall Plate Set 90-12200 USB UTP Extender Kit $51.54 90-12202 USB Over CAT5E/6 Wall Plate $51.54 14 Stock Orders Shipped Same Day until 5 P.M. C.S.T

USB 2.0 Over CAT5E/CAT6 Solutions USB Solutions USB 2.0 Over CAT5E/CAT6 Active Extender Sets A NETWORKING Transmitter FEATURES: Extends the transmission distance up to 100 meter/ 330 ft using one CAT5E/CAT6 solid-gauge cable Fully compliant with USB 2.0 specification Supports most full-speed or low-speed USB devices Recommended 1 ft. USB cable for transmitter side is included AC/DC 5V 2A power adapter included Designed in Gigabit Ethernet Protocol, supports speed up to 480 Mbps USB 2.0 Specifications Ideal for USB peripheral extension, industrial control, security, digital signage Works with Windows XP, Vista, Windows 7, Windows Server 2003 & 2008 Not compatible with USB hubs, some touch screen monitors, and video streaming devices such as webcams Software driver included Receiver B KEY A 90-12203 USB 2.0 Over CAT5E/CAT6 Extender Set $163.80 B 90-12204 USB 2.0 Over CAT5E/CAT6 Extender Balun 4-Port Hub (Active) $234.15 USB 2.0 Over CAT5E/CAT6 Advanced Extender Sets Suggested USB 2.0 extender for video streaming applications such as Webcams, and for advanced Touch Screen Monitor applications. Represents the leading edge of USB 2.0 Extension solutions, providing world class 4 port USB 2.0 connectivity over CAT 5 at data rates up to 480Mbps. FEATURES: Long reach USB 2.0 powered by ExtremeUSB technology Extends USB 2.0 high-speed and USB 1.1 (low-speed, full speed) devices up to 100m over Cat 5 cable Operates with USB 2.0 high-speed host controllers and USB 1.1 classic hosts Supports all USB device types: Control, Interrupt, Bulk and Isochronous at up to 480Mbps True plug and play, ready to operate right out of the box. No new driver installation required Supports all major operating systems including Windows, Mac OS, and Linux Integrated hub provides four remote USB 2.0 ports. Number of devices can be increased using additional USB hubs AC power adapter at remote unit provides standard 500mA to each USB port Power adapter at local unit is not required for normal operation Ideal for a wide variety of USB devices, from printers, scanners, hard drives, and audio devices, to touch screens, web cams, and game controllers 90-12205 USB 2.0 Over CAT5E/CAT6 Advanced Extender Balun 4-Port Hub (Active) $346.48 90-12206 USB 2.0 Over CAT5E/CAT6 Extender $339.13 For Expert Customer Service, Call Our Sales Team Today! 15

AV DISTRIBUTION HDMI Cables and Adapters COMPLETE LINE OF AV DISTRIBUTION SOLUTIONS While being able to enjoy true HDTV in one location is nice, being able to split, switch and extend that signal to multiple locations is becoming a very popular and a convenient option to have. In addition, being able to provide quality solutions with the right connections, distance ability and performance is a must. Whether you re distributing HDMI signals throughout a home or VGA signals throughout a school or business, MilesTek has a full range of digital and analog devices to make your installation successful. We offer devices for more budget conscious projects on up to higher-end products from a few leading AV partners. This easy-to-follow section offers signal distribution options for HDMI, DVI, Component Video, RGB, VGA, Audio and USB. Several devices utilizing CAT5E/CAT6 cabling to achieve greater distance, while keeping costs to a minimum, are also available. Our complete line of AV products includes: Cable Assemblies Switchers Distribution Amplifiers Active and Passive Baluns Over CAT5 Extenders Wall Plates HDMI High Speed with Ethernet Cables TPART # LENGTH AWG PRICE 32-270-12 1 FT 28 $5.70 32-270-36 3 FT 28 $7.95 32-270-72 6 FT 28 $10.65 32-270-120 10 FT 28 $14.64 32-270-180 15 FT 28 $18.90 32-270-240 20 FT 28 $21.90 32-270-300 25 FT 24 $37.80 32-270-420 35 FT 24 $49.00 32-270-600 50 FT 24 $77.00 32-270-792 66 FT 24 $125.75 32-270-900 75 FT RedMere $133.80 32-270-1200 100 FT RedMere $174.72 HIGH SPEED CABLE FEATURES: HDMI Ethernet Channel, which allows for a 100 Mb/s Ethernet Connection between the two HDMI connected devices Supports Audio Return Channel Functionality Allows 3D over HDMI when connected to 3D devices Supports 4K x 2K and 1080p Video Resolutions Additional Color Spaces (sycc601, RGB & YCC601) Gold Plated HDMI (Type A to Type A) Connectors Data Speed Transfer: 10.2 Gbps UL Listed HDMI High Speed 180 Degree Swivel Cables (No Ethernet) DVI to HDMI Adapter Cables PART # LENGTH PRICE 32-231-1M 1 M $9.60 32-231-2M 2 M $17.25 32-231-3M 3 M $20.25 32-231-5M 5 M $31.50 32-231-144 12 FT $19.05 32-231-300 25 FT $52.17 HDMI Adapters PART # LENGTH PRICE 32-231-420 35 FT $70.11 32-231-600 50 FT $95.79 PART # LENGTH AWG PRICE 32-260-36 3 FT 28 $19.14 32-260-72 6 FT 28 $22.45 32-260-144 12 FT 28 $32.00 32-260-300 25 FT 28 $48.54 HDMI Wall Plates A B C KEY A 10-24523 HDMI F/F $15.44 B 10-24526 HDMI F to DVI M $21.21 C 10-24527 HDMI M to DVI F $24.23 See Page 47 16 Stock Orders Shipped Same Day until 5 P.M. C.S.T

HDMI Splitters and Switchers AV DISTRIBUTION HDMI Splitters 1x2, 1x4 and 1x8 HDMI splitters distribute signal from 1 HDMI source to multiple HDMI displays simultaneously. They offers solutions for HDTV retail and show sites, STB, DVD and Projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments. FEATURES: Max. cable extension: 10 meters by 28AWG HDMI Cable; 15 meters by 26AWG HDMI Cable; 20 meters by 24 AWG Cable Input Video Signal: 0.5-1.0 volts p-p Input DDC Signal: 5 volts p-p (TTL) Max Single Link Range: 1920X1200, 1080P Output Video: HDMI 1.3 + HDCP1.0/1.1/1.2 DVI: 480p/576i/576p/720i/720p/1080i/1080p Resolutions DTV/HDTV: 480i/576i/480p/576p/ 720p/1080i/1080P/3D(1080p@24Hz) HDMI Version: HDMI 1.3 Operating Frequency: Up to 225MHz EIDI Duration: 4 seconds Power supply: DC 5V B A KEY PART # DESCRIPTION ENCLOSURE PRICE A 90-12003 HDMI 1 to 2 Splitter Metal $22.18 B 90-12004 HDMI 1 to 4 Splitter Metal $105.00 C 90-12018 HDMI 1 to 8 Splitter Metal $207.00 C HDMI Switchers The HDMI Switchers allow access up to five HDMI sources, using one HDTV display. HDMI Switchers are perfect for home theaters, audio/video installations, data centers, information distributions, conference room presentations, schools and corporate training environments. FEATURES: Switch easily between any 3 or 5 HDMI v1.3 sources Maintain 480p, 720p, 1080i and 1080p resolutions Switch inputs with the IR remote control or MANUAL push button HDCP and HDMI 1.3 version compliant Auto searches current signal input when product is turned on or by controller Easy installation Auto power and switching Compact enclosure, AC/DC power adapter included D KEY PART # DESCRIPTION ENCLOSURE PRICE D 90-12001 HDMI 3 to 1 Switcher Metal (w/ remote) $93.16 E 90-12000 HDMI 5 to 1 Switcher Metal (w/ remote) $113.85 E For Expert Customer Service, Call Our Sales Team Today! 17

AV DISTRIBUTION HDMI Matrix Switchers 4x2 HDMI Matrix Switcher This 4x2 HDMI matrix switcher is with 4 HDMI inputs and 2 HDMI outputs. It is a true matrix and can distribute any one of 4 sources to either of 2 displays, and can work as a splitter to show the same source on 2 displays simultaneously. It is HDMI 1.3 and supports full HD 1080p. FEATURES: Distributes any one of 4 sources to either of 2 displays or to both displays simultaneously Compatible with full HD 480i, 480p, 576i, 576p, 720p, 1080i and 1080p, and 3D(1080p/24Hz) Switch easily between multiple HDMI sources via remote control or via buttons on the unit With inner IR receiver to enlarge IR remote control signal HDMI 1.3 V and compliant with HDCP Power: 5wtts (Max) Power Supply: DC 5V 90-12020 4x2 HDMI Matrix Switcher $98.07 4x4 HDMI Matrix Switcher 4x4 HDMI Matrix Switcher is a full routing type 4-by-4 HDMI Matrix Switch, and any one of input sources is able to be displayed simultaneously on 4 displays. It offers HD video solution for super market; shopping Mall; HDTV, STB, DVD and projector factory; data control center; information distribution; conference room presentation; education and training, corporation show room, luxurious house, etc. FEATURES: It is real HDMI 1.3 version and HDCP compliant Compatible with full HD 480i, 480p, 576i, 576p, 720p, 1080i and 1080p, and 3D(1080p/24Hz) Multiple witching modes: IR remote control, operate manually or operate via RS232 port With IR extender: enlarge remote control signal Rack-mountable: with mounting kit and screws Input video signal: 0.5-1.0 volts p-p Input DDC signal: 5 volts p-p (TTL) Audio: LPCM,Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD master Audio HDMI video color format: deep color Maximum transmission distance: 10 meters by 28AWG cable; 15 meters by 26AWG cable(for further distance, HDMI extender is optional) Power consumption: MAX. 36W Power supply: 12V DC, 3A 90-12021 4x4 HDMI Matrix Switcher with HDMI 1.3 $382.22 18 Stock Orders Shipped Same Day until 5 P.M. C.S.T

HDMI Over CAT5E/CAT6 HDMI OVER CAT5E/CAT6 SOLUTIONS HDMI Over Dual CAT5E/CAT6 Passive Extender Balun and Wall Plate Sets FEATURES: Extends HDMI 1.3 signal up to 100 ft. @ 1080p with CAT6 Supports HDMI 1.3 Balun and Wall Plate Sets Include Transmitter & Receiver Video and audio signals are transmitted digitally over CAT5E/CAT6 cable with zero signal loss Video Bandwidth: 165 MHz Connectors: Standard HDMI 19 pin, RJ45 (CAT5E/CAT6) HDCP/DDC/CEC Compatibility No power supply required - requires source that provides 5V DC HDMI signal RoHS compliant Wall Plate: Not a decora-style wall plate, Each plate is one piece Balun: HDMI pigtail cables are 10 long Solid gauge CAT5E cable may be used, but for optimal performance and distance CAT6 is suggested for these passive devices. AV DISTRIBUTION A KEY A 90-12034 HDMI Over Dual CAT5E/CAT6 Passive $62.42 Balun Extender with HDMI Pigtail Set B 90-12035 HDMI Over Dual CAT5E/CAT6 Passive Wall Plate Extender Set $27.20 B HDMI Over Dual CAT5E/CAT6 Active Extender Balun Set FEATURES: Transmission Range: o Extends 1080p resolutions up to 115 ft. (35M) over Cat5e Cables o Extends 1080p resolutions up to 164 ft. (50M) over Cat6 Cables HDMI 1.3 and HDCP compliant Includes transmitter & receiver and power adaptor Video Bandwidth: 165 MHz Up to 24bit color depth Connectors: Standard HDMI 19 pin, RJ45 (CAT5E/CAT6) HDCP/DDC/CEC Compatibility Power Supply: 5V DC, Receiver Side Only Required Cables: Solid CAT5E/6 Cables RoHS compliant 90-12006 HDMI Over Dual CAT5E/CAT6 Extender $59.82 AV CAT5E/CAT6 EXTENDERS: Standard pre-made patch cords (strandedgauge) shouldnêt be used for these products. Use solid-gauge CAT5E/CAT6 bulk cable throughout installation run, correctly terminated with RJ45 connectors. Avoid breaking cabling up by going thru CAT5E/CAT6 wall plate jacks and panels. AV over CAT5E/CAT6 extenders in general are designed and tested to work directly from the original Source device (laptop, BlueRay DVD, cable/satellite box, etc.) to the Display/HDTV. Although success has been experienced, signal performance, compatibility, and endurance over time can't be guaranteed when combined with AV receivers/signal processors, converters, switches or splitters/amplifiers between the original Source and Display. For Expert Customer Service, Call Our Sales Team Today! 19

AV DISTRIBUTION HDMI Over CAT5E/CAT6 HDMI Over Dual CAT5E/CAT6 IR Active Extender Balun and Wall Plate 3D-Ready Sets FEATURES: Transmission Range: Extends 1080p resolutions up to 164 ft. (50M) over Cat5 Cables Extends 1080p resolutions up to 180 ft. (55M) over Cat6 Cables High Speed Chip Set that Supports 3D, 4K x 2K Full HD1080P/60HZ, HDCP Compliant Video Bandwidth: 225 MHz Includes IR Adapter Cables for both Transmitter and Receiver Supports Digital Audio Format, DTS-HD/Dolby- True HD/LPCM7.1/AC3/DTS/DSD Unique Circuit Design Allows for Protection against High Voltage and Peak Currents Tested with Whole Series 7.1 Home Theater Systems IR Adapter Cables 90-12040 HDMI IR 3D Active Extender, 50M (164 ft.) $141.14 Full IR bandwidth compatibility, IR frequency range: 20KHz to 60KHz BALUN VERSIONS: Rack or Wall Mountable 9V DC, UL Listed Power Supply for Receiver Side Dimensions: 1.25 W x.875 H x 3.25 D WALL PLATE VERSIONS: 50M Version: 5V DC, UL Listed Power Supply for Receiver Side Dimensions: 2.75 W x 4.5 H x 1.25 D IR Adapter Cables 90-12042 HDMI IR 3D Active Extender Wall Plate, 50M (164 ft.) $158.00 20 Stock Orders Shipped Same Day until 5 P.M. C.S.T

HDMI Over Single CAT5E/CAT6 AV DISTRIBUTION HDMI Over Single CAT5E/CAT6 Active Extender Balun Set FEATURES: Transmission Range: o Extends 1080p resolutions up to 164 ft. (50M) over Cat5e Cables o Extends 1080p resolutions up to 196 ft. (60M) over Cat6 Cables HDMI 1.3 and HDCP compliant Includes transmitter & receiver and power adaptors Video Bandwidth: 165 MHz Up to 24bit color depth Connectors: Standard HDMI 19 pin, RJ45 (CAT5E/CAT6) HDCP/DDC/CEC Compatibility Power Supply: 5V DC, For Transmitter and Receiver Sides Solid Gauge Cat6 Cable Preferred for This Product 90-12017 HDMI Over Single CAT6 Extender $126.00 HDMI Over HDBaseT Lite Single CAT5E/CAT6 Extenders Features HDBaseT Lite Technology that transmits uncompressed full HD digital video, audio, and control signals through a single 70m/229ft CAT5E/CAT6 cable with RJ45 connectors Transmission Range: Extends 1080p resolutions up 229 ft over a single CAT5E/CAT6 cable Super IR control system, IR transport channel can be forward or backward Supports Standard IR in 38 khz mode, includes 1 IR TX and 1 IR RX A FEATURES: HDBaseT Technology that supports 3D and 4K x 2K Video Bandwidth: Uncompressed video/audio up to 10.2 Gbps FullHD1080P HDCP compliant Supports Digital Audio Format, DTS-HD/Dolby-True HD/LPCM7.1/AC3/DTS/DSD Tested for Compatibility with all leading HD Video brands Tested with 7.1 Home Theater Systems (2) 5V DC Power Supplies B KEY A 90-12055 HDMI HDBaseT Lite Extender $193.86 B 90-12056 HDMI HDBaseT Lite Wall Plate Extender $270.95 For Expert Customer Service, Call Our Sales Team Today! 21

AV DISTRIBUTION HDMI Over Single CAT5E/CAT6 HDMI Over HDBaseT Single CAT6 IR/Serial/Ethernet Extender Now combine all your HDTV and networking requirement into one cutting edge device! This CAT6 active extender transmit HDMI with HDCP up to 330ft @ 1080p 60Hz. Built-in pass-thru IR control allows you to manage source device and RS232 for the display. This unique extender allows long distance distribution of IR, RS232 serial, audio & video using inexpensive CAT6 cables. FEATURES: HDBaseT (Power over Ethernet) Technology Supports all HDMI 1.4a 3D formats Manage both source device and display remotely Built-in 3 fast Ethernet LAN ports on each module 340 MHz bandwidth and extends up to 330ft Provides local HDMI bypass port on TX module Deep Color Video with EDID pass-thru capability DTS-HD & Dolby TrueHD multi-channel digital audio Extends full bandwidth IR and full-duplex RS-232 Includes Transmitter, Receiver and Infra-Red blaster module Note: This is not an HDMI over LAN device 90-12046 HDMI Over Single CAT6 All-In-One AV/Networking Extender Set $273.34 What is HDBaseT? HDBaseT is a connectivity standard for whole-home and commercial distribution of uncompressed HD multimedia content. The cornerstone of HDBaseT technology is 5Play, a feature set that converges uncompressed full HD digital video, audio, 100BaseT Ethernet, power over cable and various control signals through a single LAN cable. The HDBaseT 5Play feature set enables delivering the following over a single 100m/328ft CAT5e/6 cable. HDBaseT Architecture HDBaseT uses an asymmetric method, sending video, audio, Ethernet and controls from source to sink, but only 100Mb are transferred back (Ethernet and controls). Unlike conventional data communication which is a symmetrical application by nature, with required a bit error rate (BER) of at least 10 to the minus 12, the asymmetric nature of HDBaseT is based on an innovative DSP engine and an AFE (Application Front End) architecture. A special line coding scheme was developed to provide a better transfer quality to some kinds of data (audio, controls, Ethernet) without the need to 'pay' the protecting overhead for the video content which consumes most of the bandwidth. HDBaseT uses a proprietary version of Pulse Amplitude Modulation (PAM) technology, where digital data is represented as a coding scheme using different levels of DC voltage at high rates. This enables the 5Play feature-set to be maintained over a single 100 m CAT cable, without the electrical characteristics of the wire affecting performance. Although HDBaseT uses the same coding technology as Ethernet and even has an Ethernet channel, its packet-based technology is different from the traditional Ethernet packets. HDBaseT simply relies on the same physical cabling which provides the inherent benefits of the cost-effective CAT infrastructure. 22 Stock Orders Shipped Same Day until 5 P.M. C.S.T

HDMI Over LAN/Ethernet AV DISTRIBUTION HDMI Over LAN/Ethernet IR Active Extender Kit A Allows you to simultaneously send out an HDMI 1.3 Signal to one or more HDMI displays using one CAT5E/CAT6 cable over a standard managed Ethernet infrastructure as well as returns an IR control signal to the source to control it. Perfect for multiple display commercial applications such as digital signage and others, bars/restaurants, corporate. You can distribute HD digital content 330ft/100m from one source to one HD display, or to many displays through unmanaged or managed Ethernet switches (330ft/100m max between transmitter/receiver to switches or between switches to switches). Daisy-chain up to 3 levels of Ethernet switches to reach a maximum distance of 1,300ft/400m while sustaining picture and sound quality. This set includes a transmitter, receiver, and AC adapters. The units also come with one set of IR send and receive control cables shown above to allow control of source device at any remote display location. TECH NOTE: This system is not an HDMI Balun, but an HDMI over IP system. This means you can create your own AV Ethernet network and all of the receivers will find the transmitter automatically. It can even be used over smaller existing house networks and low cost LAN switches and routers. FEATURES: Connect Hundreds of Displays to a Single Source Expand by adding Ethernet Hub and more Receivers Supports HDMI v1.3 1080p with stereo audio 225MHz Bandwidth, Plug & Play for easy installation IR Allows control of source from remote locations Includes Transmitter, Receiver, and IR transmitter/receiver Includes AC adapters HDCP, HDMI v1.3, & RoHS Compliant B KEY A 90-12028 HDMI Over LAN/Ethernet IR Extender Kit $365.07 B 90-12029 HDMI Over LAN/Ethernet IR Receiver $189.00 For Expert Customer Service, Call Our Sales Team Today! 23

AV DISTRIBUTION HDMI Over CAT5E/CAT6 HDMI 1x4 Splitter over Dual CAT5E/CAT6 Extender System Allows 1 HDMI Source to be Connected to 4 HDMI Displays Devices over Dual Cat5e/Cat6 Cables Transmission Range: Extends 1080p resolutions up to 100 ft over Cat5e Cables Extends 1080p resolutions up to 110 ft over Cat6 Cables High Speed Chip Set that Supports 3D and 4K x 2K Full HD1080P/60HZ, HDCP Compliant Super IR & RS232 control system, IR transport channel can be forward or backward Supports Digital Audio Format, DTS-HD/Dolby-True HD/LPCM7.1/AC3/DTS/DSD Unique Circuit Design Allows for Protection against High Voltage and Peak Currents Tested for Compatibility with all leading HD Video brands Tested with Whole Series 7.1 Home Theater Systems Rack or Wall Mountable 9V DC, UL Listed Power Supply for Transmitter Units 1 x 4 Splitter Dimensions: 12.5 W x 1.125 H x 6.25 D Receiver Dimensions: 1.75 W x.875 H x 3.25 D 90-12044 HDMI over Dual CAT5 1x4 Splitter and Receivers $655.25 HDIR-T Transmitter IR Adapter Cable (Optional)* $7.95 HDIR-R Receiver IR Adapter Cable (Optional)* $7.95 Optional IR Adapter Cables 4 Receivers Included *CanÊt use general IR cables with these systems; Only HDIR-T / HDIR-R cables will work HDMI 4x4 Matrix Switch over Single CAT5E/CAT6 Extender System This system enables up to 4 HDMI video/audio devices to be independently switched to 4 HDMI displays or projectors for uncompressed digital distribution up to 40m (130ft) over a single Cat5e/Cat6 cable. Each output is able to show any connected source simultaneously regardless of whether the input carries HDCP FEATURES: Reads and copies EDID from connected devices with additional EDID configuration through customizable DIP switch settings Supports all high definition resolutions up to 1080p HDMI v.1.3, Supports 24Bit Color depth For even greater control and fine tuning, each receiver features a fully adjustable EQ distance range for optimizing the transmission signal Protection against ESD (electrostatic discharge) included within the receiver units to further stabilize transmission Choose from 6 switching modes infrared remote control, front panel buttons, local IR, IR call-back, LAN and RS232 Simple switching remote control included, which can also be learned into a universal remote handset to allow the control of multiple devices from one handset Pack comes complete with 1 x 4x4 Matrix with 19 brackets, 4 x 40m IR receivers with mounting brackets, IR receivers, emitters and a Matrix remote control encryption. Designed work seamlessly together for complete compatibility and full management of handshakes, screen resolutions and HD signal distribution to each display point, whether in a residential or commercial environment. 12V DC, UL Listed Power supply for 4x4 matrix 5V DC, UL Listed Power Supplies for Receivers (4 total) 4x4 Matrix Dimensions: 17.25 W x 2.05 H x 9.25 D Receivers Dimensions: 2.4 W x.09 H x 4.5 D 90-12058 HDMI 4x4 Matrix Switch over Single CAT5E/CAT6 Extender System $1,033.86 24 Stock Orders Shipped Same Day until 5 P.M. C.S.T

HDMI Over Coax AV DISTRIBUTION HDMI OVER COAX SOLUTIONS HDMI over Single RG6/SDI Coax Extender Set FEATURES: Extends high definition HDMI compliant devices up to 400 ft. (120 m) with RG6 dual or quad shield CATV broadband coax. Supports SDI signal distance up to 300M (approx. 1,000 ft.) for SD signal, 200M (660 ft.) for HD signal and 100M (330 ft.) for 3G signal Supports resolutions 480i/p, 576i/p, 720p and 1080i/p @ 24-60Hz Due to signal compression technology of this system, supports screen ratio 16:9 only not 4:3 Supports HDMI 1.3c and HDCP 1.1/1.2 compliant devices Operation at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s and 270Mb/s Equalized and re-clocked loop output Auto video mode detection (3G/SD/HD) Conversion from SMPTE 425M level B to Level A for 1080p 50/59.94/60 4:2:2 10-bit Simultaneous display with SDI and HDMI signalv Frequency Bandwidth 225MHz/link (HDMI 1.3) Supplied with a Locking PSU Consumer Electronics Control (CEC) Set includes cascadeable transmitter and receiver, (2) 5V power adapters, plus remote control Unique system allows signals from 2 input sources to transmit to 1 remote display. Cascade port is available on both transmitter and receiver, allowing signal expansion to multiple remote receivers. 90-12024 HDMI over Single RG6 Coax $357.00 90-12025 Receiver-Only for Cascading $186.80 HDMI Over Single Coax Bi-Directional IR Extender Set FEATURES: Transmission Range: Extends 1080p Resolution Up to 328 ft (100 m) over RG-6 Coaxial Cable (Dual and Quad-Shielded);Extends 1080p Resolution Up to 164 ft (50 m) over RG-59 Coaxial Cable Works with HDMI and HDCP Compliant Devices Supports High Definition Resolution 1080p Auto-adjustment of feedback, equalization and amplification DIP switch for EDID setting LED indicators for power and signal status Transfers bi-directional IR control signals, IR RX and TX included Equipped with ESD (Electro-Static Discharge) protection Mounting ears are supplied Power Supply: (2) 5V DC Dimensions: 5 W x 1 H x 5 D 90-12026 HDMI Over Single Coax Bi-Directional IR Extender Set $314.93 For Expert Customer Service, Call Our Sales Team Today! 25

AV DISTRIBUTION HDMI Over Fiber HDMI OVER FIBER EXTENDERS HDMI over Fiber Optic Extenders with IR Pass-Thru Allows long distance HDMI distribution up to 1,600 meters @ 1080i and 800 meters @ full HD 1080p utilizing inexpensive and commonly used multimode fiber optic cabling. Provides pure HDMI transmission with zero signal compression or degradation even at long distances, and is completely free of Electromagnetic Interference (EMI) which can be common with CAT5E/CAT6 copper cabling in certain critical environments. Unique, exclusive design of 3D-ready version provides loop-up HDMI port on transmitter for local monitor, and 2 HDMI outputs on receiver to connect 2 HD displays! So this device is both a signal extender and splitter in one. Why HDMI over Fiber instead of HDMI over CAT5E/CAT6? In addition to the obvious distance advantages, there are some applications where Electromagnetic Interference (EMI) is common such hospitals, government building, broadcast facilities, industrial factories, high-security areas and others. Although AV distribution over CAT5E/CAT6 is widely popular, when used in these types of environments, electrical noise causing signal in-and-outs and cross talk with other cables can occur. However fiber optic cabling is totally immune to such EMI issues, making the idea of combining it into increasingly popular HD video distribution applications very appealing. Signal flow through fiber will not interfere with other equipment or cables. Fiber is also safer for security purposes since it can t be interrupted or spliced like CAT5E/CAT6. A B FEATURES: Completely free of Electromagnetic Interference (EMI) Supports video resolution up to full HD 1080p/60Hz, 2K and 1920 x 1200 Extend HDMI signal up to 1,600 meters @ 1080i / 800 meters @ 1080p Pure digital transmission at great distances with zero signal compression Compatible with 7.1 channel audio IR pass-thru extending function, IR cables included SPECIFICATIONS: Total Fiber Bandwidth: 7.5Gbps Video Amplifier Bandwidth: 165MHz (4.95Gbps) Video Support: 480i, 480p, 720p, 1080i, 1080p/60Hz, Full HD (1920 x 1080), WUXGA (1920 x 1200) Deep color supported: up to 24 bit color space Extension Distance: 800 meters (1080p) / 1,600 meters (1080i) IR frequency bandwidth: 20-60KHz HDMI, Fiber, IR Connection: HDMI Type A / SC Multimode / 3.5mm Fully compliant with HDMI 1.3 and 1.4 high-speed specifications 3D-Ready, HDCP compliant Auto signal equalization and EDID learning Power Supplies (2): 5V DC KEY A 90-12070 HDMI Over Fiber Optic Extender With IR (1,200m) $779.92 B 90-12071 HDMI Over Fiber Optic 3D Extender With IR (1,600m) $1286.25 Part # 90-12071 26 Stock Orders Shipped Same Day until 5 P.M. C.S.T

HDMI Converters AV DISTRIBUTION PC RJ45 to HDMI/VGA Over LAN Converter Regardless of what output connections your PC/laptop may have, this cuttingedge converter allows extension of computer screen and control by directly connecting to computer s RJ45 Ethernet port with CAT5E/CAT6 cabling. Connect straight to the converter on display end, up to 328ft/100m away, or run signal through dedicated Ethernet switch/router first. Provides outputs for either HDMI or VGA for display, and includes two USB ports to control PC peripherals such as keyboard and mouse. Perfect networking display solution allows multiple users connected to same network to access a remote display. Users can share multimedia content stored on their computer from anywhere in building or facility. FEATURES: Supports up to HD 1080p or 1920x1080 resolutions with primary display, mirror desktop and extended desktop video modes Multiple PCs and multiple converters/displays can be connected to same router, but product supports only one PC-to-display connection at a time. Allows multiple users to share a Multi-Function Print (MFP) over a network to print, scan, and fax from any networked computer Support 500mA electric current for both USB ports (not compatible for combination with other USB hubs) Supported protocols: TCP/IP, LPR, DHCP, UPnP Ethernet IEEE 802 3 10Base IEEE Standards: 802.3 10Base-T; 802.3U 100Base-T Network Interface: 10/100/1000 Mbps, RJ45 Support Windows 7,Vista and XP; software driver included 90-12039 PC to HDMI/VGA Over LAN Converter $145.35 SDI to HDMI Converter This converter is ideal for broadcast/production studio applications where SDI is the standard interface. This converter makes it easier for professionals to distribute and extend 3G SDI signals while providing the ability to display production work on HDMI displays instead of more expensive SDI compatible displays. FEATURES: Input: 1xSDI; Output: 1x HDMI Auto-detect resolution of HD-SDI, SD-SDI and 3G-SDI Date rate: 270Mb/s, 1.485Gb/s, 2.97Gb/s. Impedance: 75Ω Supports signal transmission distances of up to 300M for SDI signals, 200M for HD signals and 100M for 3G signals SDI input: SD 525i, 625i; HD720P@24HZ, 720P@25HZ, 720P@30HZ,720P@50HZ, 720P@60HZ, HD 1080i@50HZ; 1080i@60HZ; HD 1080P@24HZ, 1080P@25HZ, 1080P@30HZ, 1080P@50HZ,1080P@60HZ HDMI output:720p@50hz, 720P@60Hz, 1080i@50Hz, 1080i@60Hz, 1080P@24Hz, 1080P@25Hz, 1080P@30Hz, 1080P@50Hz, 1080P@60Hz. Recommended resolutions: 720P@50Hz;720P@60Hz 90-12038 SDI to HDMI Converter $87.35 For Expert Customer Service, Call Our Sales Team Today! 27

AV DISTRIBUTION HDMI Converters HDMI Audio Extractor FEATURES: Use to extract audio signals from an HDMI source Allows simultaneous output of toslink or coaxial digital and stereo 3.5mm analog audio signals Supports 2.0CH/5.1CH audio switch Supports High Definition Resolution 1080p and 3D Supports 225 MHz/2.25 Gbps Per Channel Bandwidth (6.75 Gbps All Channels) Supports 12 Bit per Channel Deep Color, 36 Bit Total Supports Uncompressed Audio LPCM (Linear Pulse Code Modulation) Supports Compressed Audio DTS Digital, Dolby Digital (DTS-HD and Dolby True HD) HDCP Compliant Power Supply: 5V DC, UL Listed Dimensions: 2.75" W x.75" H x 2.378" 90-12049 HDMI Audio Extractor $94.01 VGA 3.5mm Audio to HDMI 720p/1080p Converter Scaler This converter is designed to take video and audio signal from PC or Laptop and upscale it to digital HDMI output of wide-range HDTV and PC resolutions, up to 1080p. Plug and play, no software is needed. Great for connecting the VGA video output of your computer or media server and integrating it into a new digital HDMI Home Theater System. FEATURES: Up-scales VGA to HDMI 720P or 1080P Supports VGA Input: 640x480@60/75Hz, 800x600@60/75Hz, 1024x768@60Hz, 1280x720@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1360x768@60Hz, 1440x900@60Hz, 1400x1050@60Hz, 1680x1050@60Hz, 1920x1080@60Hz. (Recommended input resolution: 1024x768@60Hz) Supports HDMI Output: 720p/60Hz, 1080p/60Hz Auto-store setting of output resolution Product Dimension: 119 x 74 x 23 mm ( L x W x H ) HDMI 1.3 and HDCP compliant Maximum Operation Range: 49.5 ft. (15 m) Power Supply: DC 5V, AC 100-240V 90-12014 VGA to HDMI Converter $59.98 28 Stock Orders Shipped Same Day until 5 P.M. C.S.T

HDMI Converters AV DISTRIBUTION Composite Video/S-Video to HDMI Converter Scaler RCA Composite video and S-video to HDMI Scaler takes either Composite Video or S-Video as input and converts it to HDMI. It allows older analog devices to be integrated into HD home theater system. FEATURES: Scales up Composite Video or s-video to HDMI 720p Motion Compensated 3D Wavelet Video Coding Technology is applied to make the converted picture rich in color and more vivid Input audio is integrated into HDMI output as well as pass-through to earphone or sound box Input video systems - NTSC and PAL is automatically detected and adjusted 90-12015 Composite Video/S-Video $72.50 to HDMI Converter Component Video to HDMI Converter Component Video (YPbPr) to HDMI converter box transforms Component Video (YPbPr) and Audio R/L or SPDIF signal to HDMI output. It enables the connection of devices with YPbPr output, e.g. PSP, PS2, Wii, XBOX, STB, DVD, Player, Projector, etc. to HDTV, offering you perfect view when you watch movies or play games. FEATURES: Device Type: Component Video to HDMI converter. Interface Type: YPbPr and Stereo audio In, HDMI Out Purely for conversion between video formats, not to convert the input/output video resolutions Compliant with HDMI 1.3 and HDCP Input Component Video: 480P@60Hz, 576P@50Hz, 720P@50/60Hz, 1080i@50/60Hz Output HDMI: 480P@60Hz, 576P@50Hz,720P@50/60Hz, 1080i@50/60Hz Supports SPDIF digital 5.1 audio HDMI Transmission Rate/Bandwidth: 5Gbps Maximum Signal Transmission Distance: 49.5 ft (15 meters) Output Video Impedance Matching: 75Ω Compatible with HDMI 1.3 and HDCP Working Temperature: -25 ~75 Working Humidity: 10%-60% Power Supply: DC 5V 1A 90-12012 Component Video to HDMI Converter/Scaler $56.30 For Expert Customer Service, Call Our Sales Team Today! 29

AV DISTRIBUTION HDMI Converters All Video To HDMI Converter Scaler Switcher FEATURES: Allows the conversion of up to 11 multi-format inputs to 2 HDMI outputs Allows upscaling and switching from standard definition/high definition sources to resolutions up to 720p or 1080p, with both outputs working simultaneously - some VESA formats can be bypassed by using VGA and DVI-I ports Buffers, amplifies and equalizes the signal to ensure optimum transmission and reception over the length of the cable run without any loss in video/audio quality Inputs supported include: 1 x VGA source 1 x S-Video source 2 x Composite AV sources with stereo audio 2 x Component sources with analog audio 4 x HDMI sources (with one supporting 5.1 multichannel digital audio) 1 x DVI-I source with analog audio and digital audio via optical* HDMI Outputs feature separate analog audio outputs Allows display(s) to view any source at anytime Supports bypass function with VGA and DVI-I ports DVI-I supports both analog and digital formats with L/R and optical audio input* Detached audio output by L/R and optical Delivers uncompressed digital video with zero signal loss Supports high definition resolutions up to 1080p Can bypass scaling and output as source 10-bit triple-adc for RGB/YPbPr Dual switching option: IR control with remote handset and manual front panel control Additional Remote control function with RS232 connectivity Power Supply: 5V DC, UL Listed Dimensions: 17.2 W x 1.6 H x 7.4 D 90-12019 All Video To Hdmi Converter Scaler Switcher $397.63 30 Stock Orders Shipped Same Day until 5 P.M. C.S.T

HDMI Wireless AV DISTRIBUTION HDMI Wireless Extender Set 5 GHz Wireless HDMI transmitter and receiver set offers a plug-and-play method of extending audio/video 20 meters open field and 10 meters through walls. Using WHDI technology, delivers perfect replication of high definition visuals, and full digital audio without any signal latency. Compatible with all common HD media source devices and displays (LCD / LED TV, Plasma, Projectors). IR pass-thru control allows remote of HD source device to be used on display end. SPECIFICATIONS: Supports video resolutions up to 1080p including 3D formats; Up to 1920x1080 for PC Supports HDMI 1.3/1.4 video format and HDCP 1.2/2.0 with video encryption Operating Frequency: 5.1 GHZ to 5.9 GHz Antenna: High Performance Internal Antennas IR Frequency Bandwidth: 38 KHz Includes (1) HDMI 3ft. cable, (1) IR extension cable, and remote control Power supply: (2) DC Output 5V, AC Input 100-240V FEATURES: Includes 5 GHz wireless transmitter and receiver Real-time, uncompressed HD audio/video using WHDI Technology Transmission distance reaches 20 meters open field and 10 meters through walls (actual distances will depend on construction building, walls, etc.) Extends IR and CEC signals for remote control of AV equipment 90-12030 HDMI Wireless Extender Set $277.23 VGA/HDMI Wireless Presentation System Connect any PC/Mac, PDA, or Windows Mobile with Wi-Fi wireless to access the projector or HDTV with VGA or HDMI port and display up to 4 users simultaneously. Conference control function is perfect for conference, classroom, and training sessions for real-time video and audio presentations. It feature Wi-Fi access point, log-in protection for secured access, changeable Standby Splash Screen, and built-in DHCP / SNMP provides installation flexibility. Supports 10/100BaseT Wired-LAN, Wi-Fi IEEE802.11b/g/n, A/V streaming up to 720p, and DirectX application projection such as AutoCAD, ProE & PC games Works with Windows Mobile, 7/Vista/XP/2K & Mac OS X systems 90-12062 VGA/HDMI Wireless Presentation System $371.55 For Expert Customer Service, Call Our Sales Team Today! 31

AV DISTRIBUTION VGA CABLES These premium Super VGA HD15 cables are ideal for video presentation devices, video splitter and KVM. Constructed of premium grade shielded video cable, which uses a combination of FEATURES: Resolution: Tested up to 1600 x 1200 Supports up to UXGA VGA Cables and Wall Plates coax and twisted pair, these Super VGA cables feature mini-coax, overall shield cable with high density 15-pin connectors. Ferrite core helps eliminate EMF interference. SVGA Cables ID BIT / DDC COMPATIBLE SVGA with Audio Cables SVGA HD15 with 3.5mm stereo audio plugs for extending audio as well as video. Double shielding (foil and braid) provides maximum EMI/RFI protection. This is a supreme high performance solution for quickly connecting your PC to a video display system with speakers. A KEY A 32-235-36 SVGA Ferrite/3.5 MM Stereo M/M 3' $6.93 A 32-235-72 SVGA Ferrite/3.5 MM Stereo M/M 6' $8.66 A 32-235-120 SVGA Ferrite/3.5 MM Stereo M/M 10' $10.69 A 32-235-300 SVGA Ferrite/3.5 MM Stereo M/M 25' $21.53 A 32-235-600 SVGA Ferrite/3.5 MM Stereo M/M 50' $32.81 A 32-235-900 SVGA Ferrite/3.5 MM Stereo M/M 75' $51.45 B 32-207-Y SVGA/2 Monitor Share M/2F $4.60 B Male to Female 32-206-36 3Ê $6.70 32-206-72 6Ê $8.14 32-206-120 10Ê $10.37 32-206-180 15Ê $12.74 32-206-300 25Ê $17.85 32-206-420 35Ê $22.31 32-206-600 50Ê $31.24 32-206-900 75Ê $45.41 32-206-1200 100Ê $61.69 Plenum SVGA Cables 100% Plenum Rated jacket. Male to Male 32-250-72 6Ê $98.70 32-250-180 15Ê $113.40 32-250-300 25Ê $115.50 32-250-420 35Ê $121.80 32-250-600 50Ê $161.70 Male to Male 32-208-36 3Ê $6.70 32-208-72 6Ê $6.86 32-208-120 10Ê $10.37 32-208-180 15Ê $12.74 32-208-300 25Ê $17.85 32-208-420 35Ê $22.31 32-208-600 50Ê $31.24 32-208-900 75Ê $45.41 32-208-1200 100Ê $51.19 ID BIT / DDC COMPATIBLE 32-250-900 75Ê $235.20 32-250-1200 100Ê $485.00 32-250-1800 150Ê $567.00 VGA/RGBHS Cables Used to attach a monitor with RGB, vertical sync and horizontal inputs to a PC s VGA port, VGA/RGBHS cables are configured with a HD15M at the PC end to five BNC male plugs for the monitor end. VGA WALL PLATES 32-210-72 6 ft. $15.10 32-210-120 10 ft. $18.90 A B KEY PART # DECRIPTION PRICE A 60-13044 VGA Wall Plate Insert with Dual Keystone Openings $18.30 B 60-13042 VGA Wall Plate $7.27 C 60-13043 VGA Dual Wall Plate $14.59 C D KEY PART # DECRIPTION PRICE D 60-13145 VGA and L/R Audio RCA Jacks Decor Wall Plate $13.99 E 60-13144 VGA with 3.5mm Stereo Audio Wall Plate $10.18 E 32 Stock Orders Shipped Same Day until 5 P.M. C.S.T

VGA Wall Plates PROFESSIONAL VGA ALUMINUM WALL PLATES While plastic wall plates provide an adequate solution, MilesTek understands that some commercial environments are more physically demanding and require a more durable metal wall plate. With durability in mind, we are pleased to introduce our new highquality, clear anodized aluminum wall plates. These plates provide a rugged mounting surface for professional AV connectivity and are designed to stand up to years of continued service while maintaining an aesthetically pleasing appearance. Each plate is individually assembled and engraved, and comes complete with matching mounting hardware. These plates are perfect for commercial systems integration. Examples of applications include classroom and educational facilities, corporate conference rooms and boardrooms, houses of worship, and other AV DISTRIBUTION digital signage areas. Combined with our AV cables and devices, MilesTek customers now have professional end-to-end installation solutions. Includes engraved text Durable 1/8" (11 gauge) aluminum Double beveled edges,.0635 at 45 degrees Clear anodized finish Vertical grain Feedthrough Connectors Matching mounting screws supplied Fits standard low voltage boxes Made in the USA Custom Configurations Available A B C D E F G KEY A 60-53042 1 Gang VGA Wall Plate $19.45 B 60-53043 1 Gang Dual VGA Wall Plate $29.72 C 60-53144 1 Gang VGA w/ 3.5 Audio Wall Plate $31.06 D 60-53145 1 Gang Dual VGA w/ 3.5 Audio Wall Plate $50.42 E 60-53146 1 Gang VGA w/ 3.5 Audio, 3 RCA Wall Plate $48.47 F 60-53246 2 Gang Dual VGA w/ 3.5 Audio, 3 RCA Wall Plate $54.12 G 60-53147 1 Gang VGA w/ 3.5 Audio, RJ45, 3 RCA Wall Plate $68.36 D-Sub/HD Gender Changers A B C D KEY A 10-24500 DB9 M-M $2.63 B 10-24501 DB9 F-F $2.63 10-24508 DB9 M-F $4.20 C 10-24502 DB15 M-M $4.20 D 10-24503 DB15 F-F $4.20 10-24509 DB15 M-F $12.34 E F G H KEY E 10-24504 DB25 M-M $3.41 F 10-24505 DB25 F-F $3.41 G 10-24506 HD15 M-M $5.25 10-24511 HD15 M-F $6.30 H 10-24507 HD15 F-F $4.46 For Expert Customer Service, Call Our Sales Team Today! 33

AV DISTRIBUTION VGA Splitters VGA Splitters This VGA splitter and distribution amplifier is used to take video input from a single source and direct it to two, four or eight video outputs for monitors using analog signals. The signal boost allows you to not only split the signal but to extend the distance of the signal to about 210 feet. (Your average VGA card, combined with a standard VGA cable, can send a clear VGA signal approximately 25 feet.) This makes public broadcasts from a single computer very feasible. If you want to display the same information on many monitors at once, such as in a classroom environment, or at a demonstration, this product performs incredibly well. FEATURES: 2, 4 and 8 port models available High 250 MHz video bandwidth Resolution: 1920 x 1440 in 24 or 32 bit true color mode Transmission distance of up to 210 feet Suitable for SVGA, VGA and Multi-sync monitors. Daisy-Chain multiple units together for even more outputs Ideal for public broadcasting; remote monitoring; classroom and training facilities A C B KEY PART # PORTS PRICE A 90-20105 2 $46.06 B 90-20106 4 $76.57 C 90-20107 8 $131.22 VGA Splitters with 3.5 Stereo Audio Connects two or four monitors and audio to one computer and broadcast to multiple monitors/audio simultaneously with the VGA with Audio video splitter. Its built-in video extender ensures clear and sharp images as far as 213ft away from the CPU. Use video splitter to enhance your presentations as well as broadcasting of real-time data. It is ideal for classrooms & training facilities, and remote security monitoring. To ensure the best video integrity, the video splitter has a high bandwidth of 400MHz, FEATURES: Multi-function With 400 MHz Pixel Frequency Turn on or off the monitor by means of the front panel switch Extends video signal for distance up to 65m Supports the DDC, DDC2, DDC2B (For video out port 1) up to 2048x1536 maximum resolution and a two level cascade capability that provides for future expansion. Supports analog plasma screen & flat panel, projectors and any VGA monitor types & sizes. Includes power adaptor. Can be cascaded The output is compatible with standard VGA card General audio line level output Allowed to use the general earphone D E KEY PART # PORTS PRICE D 90-20202 2 $59.02 E 90-20203 4 $121.56 34 Stock Orders Shipped Same Day until 5 P.M. C.S.T

VGA Switchers AV DISTRIBUTION VGA Switchers with 3.5mm Stereo Audio Two or four computers can share one monitor, projector or any video display with VGA port. This premium video selector has a high bandwidth of 250MHz to maintain video integrity and provides clear & sharp images. Ideal for presentations, classrooms, control center, remote monitoring & training facilities. Provides high resolution up to 1920x1440, status LEDs, front panel port selector and supports analog flat panel, projectors, VGA monitors, HDTV s. G FEATURES: F Resolution up to 1920x1440 Pixel frequency up to 250MHz Supports DDC1, DC2, DDC2B, DDC2B+, DDC2AB (For video out port 1) Hot pluggable Auto skip over the power-off and suspended PC, and the unplugged VGA cable KEY PART # PORTS PRICE F 90-20208 2 $66.24 G 90-20209 4 $119.55 VGA MATRIX SWITCHERS This is a video share and video splitter in one switch. Two computers can share two or four monitors, projectors or any video displays with VGA port (Video Share), or a computer can control the two or four video output and project to all monitors (Video Splitter). This premium video selector has a high bandwidth of 250MHz to maintain video integrity and provides clear & sharp images. Ideal for presentations, classrooms, control center, remote monitoring & training facilities. Provides high resolution up to 1920x1440, status LEDs, front panel VGA Matrix Switchers FEATURES: Resolution up to 1920x1440 Pixel frequency up to 250MHz Supports DDC1, DC2, DDC2B, DDC2B+, DDC2AB (For video out port 1) Hot pluggable Auto skip over the power-off and suspended PC, and the unplugged VGA cable port selector and supports analog flat panel, projectors & VGA monitors up to 21". Includes power adaptor. VGA Video Matrix Switchers with Audio FEATURES: Intelligent functionality With 250 MHz Pixel Frequency Extends video signal for distance up to 65m Supports the DDC, DDC2, DDC2B. (For video out port 1 and 2) Can be cascaded The output is compatible with standard VGA card Free select from PC(A) or PC(B) or switch off by means of the front panel switch C D A B E KEY PART # DESCRIPTION PORTS PRICE A 90-20210 VGA Matrix Switcher 2x2 $41.91 B 90-20211 VGA Matrix Switcher 2x4 $113.08 KEY PART # DESCRIPTION PORTS PRICE C 90-20215 VGA Video Matrix Switcher with Audio 2x2 $123.56 D 90-20216 VGA Video Matrix Switcher with Audio 2x4 $154.05 E 90-20217 VGA Video Matrix Switcher with Audio 4x4 $269.69 For Expert Customer Service, Call Our Sales Team Today! 35

AV DISTRIBUTION VGA OVER CAT5E/CAT6 SOLUTIONS MilesTek s high-resolution VGA over UTP devices extend the your video and stereo audio signals up to 1,000 feet from the VGA source using two CAT5/5E/6 cables. Receiver units have built-in equalization, gain control to adjust brightness and skew control. This is a perfect and reliable solution for situations where your VGA monitor needs to be located in maybe a separate room or floor VGA 3.5mm Audio Over CAT5E/CAT6 Active Extender Set PART # PRICE 90-12105 $97.73 VGA Over CAT5E/CAT6 from where the VGA source, i.e. computer workstation, is located. Running VGA over commonly used CAT5 cable results in greater signal distance, reduced material costs and ease of installation. Example applications include larger AV environments such as classroom and educational facilities, corporate conference rooms and boardrooms, houses of worship, and other digital signage areas. FEATURES: Set includes transmitter, receiver and power adapters for each Transmitter module has loop-thru port for local monitor Supports VGA/WUXGA up to 1920x1440 @ 60Hz. 1920x1200 to 100ft., 1280x1024 to 300ft., 1024x768 to 500ft. Works with monitors, projectors, HDTV and flat panels SPECIFICATIONS: CAT5E/CAT6 Cable Equalization: Adjustable EQ Controls Video Bandwidth: 150Mz Insertion Loss: Less than 3db Impedence: RGB - 75 Ohms unbalanced, CAT5E - 100 Ohms Balanced Video Signal Return Loss: -15db Max from DC to 60MHz Audio Frequency: 10Hz to 25KHz / -3dB Audio Impedence/Connectors: 10k Ohms / 3.5mm Operating Temperature: 32 to 120 degrees F FCC, UL, CE, RoHS Compliant VGA RS232 IR Audio Over CAT5E/CAT6 Active Extender Set FEATURES: Extends A/V & control signals Control a projector or HDTV up to 1,000 ft. over CAT5E/CAT6 Supports full WUXGA high-resolution at max distance Supports analog stereo and digital SPDIF audio Supports RS-232 serial with bi-directional IR blaster Provides adjuctable EQ and gain control Built-in mounting flange with locking power connectors Includes transmitter, reveiver and IR emitters Includes universal 100v-240v power adaptors FFC, CE & RoHS compliant SPECIFICATIONS: Video Bandwidth: 350MHz Connectors: HD15 / DB9 / RCA / 3.5MM / RI45 EQ & Gain Adjustment: Rotary RS-232 Serial: Half-Duplex with Dual-Mode Infra Red Frequency: 38KHz Power Supply / Operating Temp: 5v 2A DC / 32 to 131ºF 90-12120 VGA RS232 IR Audio Over CAT5E/CAT6 Extender Set $287.00 36 Stock Orders Shipped Same Day until 5 P.M. C.S.T

VGA Over CAT5E/CAT6 AV DISTRIBUTION VGA 3.5mm Audio Over CAT5E/CAT6 Active Extender Wall Plate Set This extender device provides an economical, yet robust way to connect any VGA/WGA with audio devices using a single CAT5E or CAT6 cable. Perfect for any presentation application, it has 350MHz video bandwidth for clear and sharp images up to 1,000 ft. (300M) away. Provides gain and EQ control for optimal picture and decora wall plate styling. It supports resolution up to 1600x1200 @ 60Hz. Includes wall plate transmitter & receiver, and universal power adapters. FEATURES: Included in Kit: (1) transmitter, (1) receiver, (2) 12v DC power adaptors Signal Type: VGA/SVGA, XGA/WUXGA Video Bandwidth: 350MHz Connectors: HD15, RJ45, 3.5mm Insertion Loss: Less than 3db Impedance: RGB - 75 Ohms Unbalanced / CAT5E - 100 Ohms Balanced Video Signal Return Loss: -15db Max from DC to 60MHz EQ & Gain Adjustment: Rotary Audio Frequency: 10Hz to 25KHz / -3d Power Supply / Operating Temp: 12v DC 1.2A / 32 to 120 F Compliance: FCC, UL, CE, RoHS Warranty: 1 year Supported Distances: 1600x1200 @ 60Hzat 100 meters, 1280x1024 @ 60Hz at 120 meters, 1024x768 @ 60Hz at 180 meters, 800x600 @ 60Hz at 200 meters, and 640x480 @ 60Hz at 300 meters. PART # PRICE 90-12106 $100.15 VGA Audio with Composite Vide/Audio Over CAT5E/CAT6 Passive Extender Wall Plate Set Intuitive design anticipates both computer and regular A/V application. This wall plate extender kit has shielded casing to meet government, school, and commercial requirements. Using 2xCAT5e RJ45 cables, it provides both PC VGA & stereo audio along with composite audio and video. USB port on transmitter plate allows power delivery via USB cable from laptop/computer when VGA port is non-powered. Supports 1280x1024 @60Hz up to 30 Meters. (Local Connectors: 1 HD15/3.5mm, 2 RJ45, 3 RCA female; Remote Connectors: 1 HD15/3.5mm, 2 RJ45, 3 RCA female) PART # PRICE 90-12119 $130.85 For Expert Customer Service, Call Our Sales Team Today! 37

AV DISTRIBUTION VGA Over CAT5E/CAT6 VGA Audio CAT5E/CAT6 1x4 Splitter, 2-Port Expandable Receiver Kit This extender kit sends VGA video and audio using a single CAT5e cable. The transmitter module has built-in 4-Port RJ45 D/A with loop-out for local screen and speaker. Receiver module has dual-output VGA/Audio that allows you to connect two-sets of screens and speakers, it has gain and EQ control for optimal picture, and extra RJ45 port for daisy-chainability up to 3 levels. Supports resolution up to 1600x1200 @ 60Hz up to 100 meters, 1280x1024 @ 60Hz at 120 meters, 1024x768 @ 60Hz at 180 meters, 800x600 @ 60Hz at 200 meters and 640x480 @ 60Hz at 300 meters. FEATURES: Provides pass-thru port for local monitor and speaker Tx provides up to 4 receivers with local pass-thru port Rx has build-in 2-Port D/A and RJ45 daisy-chain port Rx provides equalization and gain control Expand as needed with 3-level daisy-chain capability Supports VGA/UXGA up to 1600x1200 @ 60Hz Starter Kit includes Tx/Rx and power adaptors FCC, CE, and RoHS compliant B A KEY PART # DECRIPTION PRICE A 90-12114 VGA Audio CAT5E/CAT6 Extend Kit $189.00 B 90-12115 2-Port Expandable Receiver Only $108.23 C 90-12109 Wall Plate Receiver Only $66.23 C 38 Stock Orders Shipped Same Day until 5 P.M. C.S.T

AV Feed-Thru Wall Plates AV DISTRIBUTION HDMI WALL PLATES A B C D E KEY PART # DECRIPTION PRICE A 60-10608 Single HDMI Pigtail Decor Wall Plate $13.61 B 60-10609 Dual HDMI Pigtail Decor Wall Plate $20.04 COMPONENT AND VIDEO WALL PLATES KEY PART # DECRIPTION PRICE C Single HDMI Pigtail and RGB Component 60-10612 Video Triple RCA Jack Decor Wall Plate $15.17 D Single HDMI Pigtail and 3.5mm 60-10613 Stereo Jack Decor Wall Plate $14.32 E HDMI VGA 3.5mm Audio Stainless 60-10615 Steel Feed-Thru Wall Plate $25.05 HDMI Cables VGA Cables F G H See Page 16 See Page 36 KEY PART # DECRIPTION PRICE F 60-10621 RGB Component Video Triple RCA Jacks Decor Wall Plate $5.39 G 60-10622 RGB Component Video with Audio Wall Plate $10.99 KEY PART # DECRIPTION PRICE H 60-10623 HDMI Wall Plate With Component Video $36.08 VGA WALL PLATES A B C D E KEY PART # DECRIPTION PRICE A 60-13044 VGA Wall Plate Insert with Dual Keystone Openings $18.30 B 60-13042 VGA Wall Plate $7.27 C 60-13043 VGA Dual Wall Plate $14.59 KEY PART # DECRIPTION PRICE D 60-13145 VGA and L/R Audio RCA Jacks Decor Wall Plate $13.99 E 60-13144 VGA with 3.5mm Stereo Audio Wall Plate $10.18 For Expert Customer Service, Call Our Sales Team Today! 39

AV DISTRIBUTION AV Cable Assemblies COMPONENT VIDEO (RGB) CABLES These high-graded professional component video cables will give you the best conductivity signal and quality. For use with video cameras, DVD, VCRs, DSS, High Definition digital TV (HDTV), VCR, DSS, DVD, TV and so on. Triple heavy-duty, superior shielded RG-59/U cables to maximum signal transfer and minimize interference. Gold plated RCA plugs to improve conductivity. Color coded and labeled for the luminance (Y) and chrominance (Pr, Pb) Signals. Fully molded construction. RGB Video Cable 30-105-36-BLACK 3Ê $5.60 30-105-72-BLACK 6Ê $8.05 30-105-144-BLACK 12Ê $11.43 30-105-300-BLACK 25Ê $20.77 30-105-600-BLACK 50Ê $35.70 30-105-900-BLACK 75Ê $53.43 30-105-1200-BLACK 100Ê $71.17 RGB Video Cable w/ Stereo Audio NOW IN BLACK! 30-106-36-BLACK 3Ê $8.98 30-106-72-BLACK 6Ê $10.73 30-106-120-BLACK 10Ê $16.78 30-106-144-BLACK 12Ê $16.80 30-106-180-BLACK 15Ê $18.03 30-106-300-BLACK 25Ê $27.07 30-106-420-BLACK 35Ê $37.34 30-106-600-BLACK 50Ê $49.47 30-106-900-BLACK 75Ê $53.43 30-106-1200-BLACK 100Ê $94.50 3.5 mm Stereo Audio Patch Cords Male to Male 38-100-72 6Ê $1.58 38-100-144 12Ê $2.10 38-100-300 25Ê $5.60 38-100-600 50Ê $9.45 Male to Female Extension 38-101-72 6Ê $2.10 38-101-144 12Ê $2.59 38-101-300 25Ê $3.78 38-101-600 50Ê $6.65 Audio RCA Gold Plated Patch Cables 30-101-36 3Ê $1.68 30-101-72 6Ê $2.25 30-101-144 12Ê $3.63 30-101-300 25Ê $6.06 Audio/Video RCA Gold Plated Patch Cables 30-102-36 3Ê $3.02 30-102-72 6Ê $3.90 30-102-144 12Ê $4.65 30-102-216 18Ê $6.15 30-102-300 25Ê $12.30 30-102-600 50Ê $17.47 RG59 BNC to RCA Cables RG59 BNC-BNC Cables 3.5mm Stereo to RCA Y Cables 20-613-36 3Ê $5.39 20-613-72 6Ê $5.99 20-613-144 12Ê $6.56 20-613-300 25Ê $43.23 Video RCA to RCA RG59 Cables 20-612-36 3Ê $2.76 20-612-72 6Ê $3.18 20-612-144 12Ê $6.30 20-612-300 25Ê $6.98 20-612-600 50Ê $13.13 20-612-900 75Ê $38.06 20-612-1200 100Ê $47.25 20-614-72 6Ê $4.60 20-614-144 12Ê $8.40 20-614-300 25Ê $3.92 20-614-600 50Ê $22.31 10-22022 10-22023 3.5mm to 2 RCA Y Cables are designed for quality computer audio applications. 3.5mm audio cables connect the PC sound card, portable CD player or any mini-stereo audio device with 3.5mm or RCA jacks to multimedia speakers. All Y cables are 6 inches. PART # DESCRIPTION SIZE PRICE 10-22021 3.5mm Stereo Male to (2) 3.5mm Stereo Females 6 $3.28 10-22022 3.5mm Stereo Female to (2) 3.5mm Stereo Males 6 $2.89 10-22023 3.5mm Stereo Male to (2) RCA Females 6 $2.89 10-22025 3.5mm Stereo Male to (2) RCA Males 6 $1.61 10-22030 3.5mm Stereo Female to (2) RCA Males 6 $1.89 10-22031 3.5mm Stereo Male to (2) RCA Females 6 ft. $3.10 10-22027 3.5mm Stereo Male to (2) RCA Males 6 ft. $2.84 40 Stock Orders Shipped Same Day until 5 P.M. C.S.T

TYPE A BASIC RUN CABLE 3-28 AWG Coaxial Cables with Braided Copper Shielding, 3-24 AWG Twisted Pair and a single 24 AWG Pair, Mylar Foil Shield UXGA Supports PC Resolutions up to 1600 x 1200 Pixels Includes protective caps with pulling eyes that are able to withstand a maximum pulling tension of 30 pounds Available in CL2-rated PVC jacket for residential installations and CMP jacket for commercial installations DIN14 Connector O.D. 0.73 Quick-Connect Cabling System SIZE PVC PART # PRICE PLENUM PART # PRICE 15Ê QC01-A-15 $22.10 QC02-A-15 $50.63 25Ê QC01-A-25 $31.79 QC02-A-25 $80.93 35Ê QC01-A-35 $41.35 QC02-A-35 $110.54 50Ê QC01-A-50 $55.76 QC02-A-50 $155.95 75Ê QC01-A-75 $79.85 QC02-A-75 $225.04 100Ê QC01-A-100 $103.95 QC02-A-100 $292.15 125Ê QC01-A-125 $122.85 QC02-A-125 $373.09 150Ê QC01-A-150 $150.73 QC02-A-150 $446.12 MALE O.D. 0.73 TYPE B BASIC RUN CABLE FEMALE Din14 Male to Din 14 Female A Wall Plate PART # PRICE QC04-D14A-FP $15.23 5-28 AWG Coaxial cables with Mylar Foil and 85% Braided Copper Shielding Ideal for A/V and Component Video Applications Compatible with Analog and S/PDIF Digital Audio Includes protective caps with pulling eyes that are able to withstand a maximum pulling tension of 30 pounds Available in CL2-rated PVC jacket for residential installations and CMP jacket for commercial installations SIZE PVC PART # PRICE PLENUM PART # PRICE 15Ê QC01-B-15 $25.36 QC02-B-15 $73.50 25Ê QC01-B-25 $38.17 QC02-B-25 $119.70 35Ê QC01-B-35 $50.59 QC02-B-35 $163.80 50Ê QC01-B-50 $69.67 QC02-B-50 $231.00 75Ê QC01-B-75 $100.10 QC02-B-75 $336.00 100Ê QC01-B-100 $119.54 QC02-B-100 $447.30 125Ê QC01-B-125 $142.49 QC02-B-125 $558.60 150Ê QC01-B-150 $156.98 QC02-B-150 $667.80 SVGA + Stereo Audio Solution Basic Run Cable: Type A front A back QC03-HD15M-35M-01 1Ê $9.35 QC03-HD15M-35M-03 3Ê $12.05 QC03-HD15M-35M-06 6Ê $16.20 QC03-HD15M-35M-10 10Ê $21.74 KEY A QC04-HD15-35F-FP HD15 VGA + 3.5mm Female Wall Plate $17.33 SVGA High Density DB15 Solution Basic Run Cable: Type A front B back Din14 Male to HD DB15 Male Adapter Cable QC03-HD15-01 1Ê $9.11 QC03-HD15-03 3Ê $11.58 QC03-HD15-06 6Ê $12.65 QC03-HD15-10 10Ê $16.43 KEY B QC04-HD15-FP HD15 VGA Female Wall Plate $14.44 DIN14 Connector O.D. 0.73 MALE front B O.D. 0.73 back AV DISTRIBUTION FEMALE Composite Video + Stereo Audio Basic Run Cable: Type B Din14 Male to HD15 Male + 3.5mm Stereo Plug Adapter Cable Din14 Male to Din 14 Female B Wall Plate PART # PRICE QC04-D14B-FP $15.23 Din14 Male to 3 RCA Male (RWY) Adapter Cable QC03-RWY-01 1Ê $8.27 QC03-RWY-03 3Ê $9.35 QC03-RWY-06 6Ê $10.87 QC03-RWY-10 10Ê $13.47 KEY B QC04-RWY-FP 3 RCA Composite Video + Stereo Audio Plate $12.86 For Expert Customer Service, Call Our Sales Team Today! 41

AV DISTRIBUTION TYPE B BASIC RUN CABLE (continued) Component Video + Stereo Audio Solution Basic Run Cable: Type B Quick-Connect Cabling System Component Video 3RCA (RGB) Solution Basic Run Cable: Type B front C back Din14 Male to 5 RCA Male Adapter Cable QC03-5RCA-01 1Ê $10.11 QC03-5RCA-03 3Ê $13.23 QC03-5RCA-06 6Ê $17.96 QC03-5RCA-10 10Ê $23.39 front D back Din14 Male to 3 RCA Male (RGB) Adapter Cable QC03-RGB-01 1Ê $8.27 QC03-RGB-03 3Ê $9.35 QC03-RGB-06 6Ê $10.87 QC03-RGB-10 10Ê $13.47 KEY C QC04-5RCA-FP 5 RCA Component + Stereo Audio Plate $15.49 KEY D QC04-RGB-FP 3 RCA Component Video Wall Plate $12.86 Component Video (3RCA)+ Digital Audio (1RCA) Solution Basic Run Cable: Type B Composite Video (1RCA)+ S Video (MIN DIN 4) +Stereo Audio Solution Basic Run Cable: Type B front E back Din14 Male to 4 RCA Male Adapter Cable QC03-4RCA-01 1Ê $9.35 QC03-4RCA-03 3Ê $12.42 QC03-4RCA-06 6Ê $17.15 QC03-4RCA-10 10Ê $23.52 front F back Din14 Male to 3 RCA + MDIN4 Adapter Cable QC03-MD4-01 1Ê $9.82 QC03-MD4-03 3Ê $12.89 QC03-MD4-06 6Ê $17.62 QC03-MD4-10 10Ê $23.99 KEY E QC04-4RCA-FP 4 RCA Component + Digital Audio Plate $14.44 KEY F QC04-MD4-FP 3 RCA Composite + S-Video Wall Plate $15.49 Component Video RGB (3BNC) Solution Basic Run Cable: Type B Component Video RGBHV (5BNC) Solution Basic Run Cable: Type B front G back Din14 Male to 3 BNC Adapter Cable QC03-3BNC-01 1Ê $13.00 QC03-3BNC-03 3Ê $14.31 QC03-3BNC-06 6Ê $16.31 QC03-3BNC-10 10Ê $18.90 front H back Din14 Male to 5 BNC Adapter Cable QC03-5BNC-01 1Ê $18.67 QC03-5BNC-03 3Ê $21.74 QC03-5BNC-06 6Ê $26.36 QC03-5BNC-10 10Ê $32.60 KEY G QC04-3BNC-FP 3 BNC Component Video Wall Plate $15.49 KEY H QC04-5BNC-FP 5 BNC Component Video Wall Plate $18.11 42 Stock Orders Shipped Same Day until 5 P.M. C.S.T

Quick-Connect Cabling System TYPE C BASIC RUN CABLE 4-28 AWG twisted pairs with Mylar foil and drain wire, 28 AWG twisted pair and 5-28 AWG conductors Optimized design for TMDS uncompressed digital video; such as HDMI and DVI application. Includes protective caps with pulling eyes that are able to withstand a maximum pulling tension of 30 pounds Available in CL2-rated PVC jacket for residential installations and CMP jacket for commercial installations SIZE PVC PART # PRICE PLENUM PART # PRICE 15Ê QC01-C-15 $30.50 QC02-C-15 $48.72 25Ê QC01-C-25 $40.61 QC02-C-25 $78.96 35Ê QC01-C-35 $50.61 QC02-C-35 $105.84 50Ê QC01-C-50 $65.71 QC02-C-50 $147.84 75Ê QC01-C-75 $79.83 QC02-C-75 $215.04 100Ê QC01-C-100 $225.75 QC02-C-100 $431.55 125Ê QC01-C-125 $262.40 150Ê QC01-C-150 $309.94 DVI Digital Link Solution Basic Run Cable: Type C Din19 Male to DVI Male Adapter Cable QC03-DVID-01 1Ê $11.00 QC03-DVID-03 3Ê $12.76 QC03-DVID-06 6Ê $15.59 QC03-DVID-10 10Ê $19.14 AV DISTRIBUTION KEY J QC04-DVID-FP DVID Female Wall Plate $17.33 K 90-12300 DVID Extender up to 150 ft. $76.13 TECH NOTE: Type C Basic Run Cables 35 ft. or longer MUST be used with an HDMI or DVI extender/equalizer. See options on this page. K front J back DIN19 Connector O.D. 0.73 MALE O.D. 0.73 FEMALE Din19 Male to Din 19 Female C Wall Plate PART # PRICE QC04-D19-FP $23.63 HDMI Extender/Equalizer (for QC Type C cables 35 ft. or longer) The HDMI Extender automatically adjusts and compensates for cable attenuation up to 40dB. In addition, it can be powered directly from the cable without an external power supply up to 150 feet which is ideal for long distance application. 90-12009 HDMI Extender/Equalizer $40.95 90-12010 HDMI Extender Pigtail Adapter Cable $46.20 DVI with Audio Digital Link Solution Basic Run Cable: Type C Din19 Male to DVI Male Adapter Cable QC03-DVID-35M-01 1Ê $11.34 QC03-DVID-35M-03 3Ê $13.37 QC03-DVID-35M-06 6Ê $16.31 QC03-DVID-35M-10 10Ê $21.87 KEY L QC04-DVID-35F-FP DVID with 3.5mm Audio Female Wall Plate $41.48 HDMI Digital Link Solution Basic Run Cable: Type C front L back 90-12009 90-12010 Din19 Male to HDMI Male Adapter Cable QC03-HDMI-01 1Ê $11.34 QC03-HDMI-03 3Ê $13.23 QC03-HDMI-06 6Ê $16.12 QC03-HDMI-10 10Ê $20.03 M For Expert Customer Service, Call Our Sales Team Today! KEY M QC04-HDMI-FP HDMI Female Wall Plate $17.59 43

AV DISTRIBUTION Quick-Connect Cabling System QUICK-CONNECT INTEGRATED WALL PLATES & CABLES Integrated Wall Plate - Single Gang A B C D E F KEY A QC04-VR-1-SFP DIN 14 Male to HD 15 F,RCA F/Composite Video Single Gang Wall Plate $17.33 B QC04-A2R-1-SFP DIN 14 Male to 3.5 mm Jack and, 2 RCA F/Stereo Audio Single Gang Wall Plate $24.73 C QC04-VACN-2-SFP HD 15, 3.5 mm stereo, Component Video Single Gang Wall Plate with two fly leads $47.57 D QC04-VACP-1-SFP HD 15, 3.5 mm stereo, Composite Video/Audio Single Gang Wall Plate with one fly lead $30.40 E QC04-VACP-2-SFP HD 15, 3.5 mm stereo, Composite Video/Audio Single Gang Wall Plate with two fly leads $34.97 F QC04-VACPS-2-SFP HD 15, 3.5 mm stereo, Composite Video/Audio and S-Video Single Gang Wall Plate with two fly leads $47.41 Integrated Wall Plate - Double Gang G H I J KEY G QC04-VACPK-1-DFP HD 15, 3.5 mm stereo, Composite Video/Audio with four keystone jacks cutouts Double GangWall Plate with one fly lead $32.92 H QC04-VACPK-2-DFP HD 15, 3.5 mm stereo, Composite Video/Audio with four keystone jacks cutouts Double Gang Wall Plate with two fly lead $39.06 I QC04-VACPSK-2-DFP HD 15, 3.5 mm stereo, Composite Video/Audio and S-video with four keystone jacks cutouts Double Gang Wall Plate with two fly lead $51.19 J QC04-VACNK-2-DFP HD 15, 3.5 mm stereo, Component Video with four keystone jacks cutouts Double Gang Wall Plate with two fly lead $41.74 K L 44 Adapter Cables KEY K QC03-VACP-1-18 DIN 14 Male to HD 15, 3.5 mm stereo, Composite Video/Audio Adapter Cable with 1.5ft long $20.48 K QC03-VACP-1-03 DIN 14 Male to HD 15, 3.5 mm stereo, Composite Video/Audio Adapter Cable with 3ft long $23.10 K QC03-VACP-1-06 DIN 14 Male to HD 15, 3.5 mm stereo, Composite Video/Audio Adapter Cable with 6ft long $28.75 K QC03-VACP-1-10 DIN 14 Male to HD 15, 3.5 mm stereo, Composite Video/Audio Adapter Cable with 10ft long $36.23 KEY L QC03-VACP-2-18 DIN14 Male to HD15, Composite Video, and Din14 male to 3.5mm Stereo and 2RCA audio Adapter cables, 2 pieces in a set $21.89 L QC03-VACP-2-03 DIN14 Male to HD15, Composite Video, and Din14 male to 3.5mm Stereo and 2RCA audio Adapter cables, 2 pieces in a set $25.73 L QC03-VACP-2-06 DIN14 Male to HD15, Composite Video, and Din14 male to 3.5mm Stereo and 2RCA audio Adapter cables, 2 pieces in a set $33.47 L QC03-VACP-2-10 DIN14 Male to HD15, Composite Video, and Din14 male to 3.5mm Stereo and 2RCA audio Adapter cables, 2 pieces in a set $43.71 Stock Orders Shipped Same Day until 5 P.M. C.S.T

Interseries Adapters, XLR Audio AV DISTRIBUTION Interseries Adapters A B C D Q R S T E F G H U V W X I J K L Y Z AA BB M N O P KEY PART # INTERSERIES ADAPTERS DESCRIPTION PRICE A 10-01014 RCA Male to BNC Male $2.02 B 10-01015 RCA Male to BNC Female $1.30 C 10-01016 RCA Female to BNC Male $1.49 D 10-01118 RCA Female to BNC Female $2.18 E 10-01017 F-Type Female to BNC Male $1.64 F 10-01018 BNC Female to F-Type Male $2.27 G 10-01019 F-Type Female to BNC Female $1.64 H 10-01020 F-Type Female to RCA Male $1.64 I 10-01021 RCA Female to F-Type Male $1.51 J 10-01022 RCA Female to F-Type Female $1.22 K 10-01082 RCA Female to ¼ Mono Male $1.01 L 10-01083 RCA Female to ¼ Mono Female $2.10 M 10-01095 RCA Male to ¼ Mono Female $1.10 N 10-01103 3.5mm Mono Female to RCA Male $0.67 O 10-01098 3.5mm Mono Male to RCA Female $0.64 P 10-01096 3.5mm Stereo Female to 3.5mm Mono Male $0.63 XLR Microphone Cables XLR Male to Female - Pro Grade 31-200-36 3 ft. $22.30 31-200-60 5 ft. $29.23 31-200-120 10 ft. $37.13 31-200-180 15 ft. $36.39 31-200-300 25 ft. $64.43 31-200-600 50 ft. $120.69 31-200-1200 100 ft. $221.34 XLR Wall Plates XLR wall plates are made of stainless steel and contain rear solder-type Switchcraft connectors. XLR Male to Female - Economy 31-101 36 3 ft. $11.51 31-101 60 5 ft. $11.38 31-101 120 10 ft. $13.10 31-101 180 15 ft. $13.57 31-101 300 25 ft. $16.80 60-03030 XLR Jack (D3F) Stainless $11.89 60-03031 XLR Dual Jk (D3F) Stainless $18.96 33673-F Audio Cable, 2 Pair - 22 AWG, shielded stranded $0.23 CC DD EE KEY PART # INTERSERIES ADAPTERS DESCRIPTION PRICE Q 10-01099 3.5mm Stereo Female to 3.5mm Stereo Female $1.30 R 10-01106 3.5mm Stereo Female to ¼ Stereo Male $0.55 S 10-01100 3.5mm Stereo Male to 2x3.5mm Stereo Female $0.76 T 10-01101 3.5mm Stereo Female to 2 x ¼ Stereo Female $1.09 U 10-01104 3.5mm Stereo Male to ¼ Stereo Female $0.50 V 10-01105 3.5mm Mono Female to ¼ Mono Male $0.63 W 10-01107 3.5mm Mono Male to ¼ Mono Female $0.50 X 10-01102 ¼ Stereo Male to 2 x 3.5mm Stereo Female $6.47 Y 10-01121 ¼ Stereo Male to 2 x RCA Female $1.51 Z 10-01122 3.5mm Stereo Male to 2xRCA Female $1.26 AA 10-26054 ¼ Barrel Mono Female to Female $2.10 AA 10-26055 ¼ Barrel Stereo Female to Female $6.17 BB 10-21538 RCA Bulkhead Barrel 0.5 D $5.80 CC 10-21900 RCA Barrel F/F $0.25 DD 10-21904 RCA M/F/F $1.68 EE 10-21905 RCA F/F/F $1.18 MILESTEK AUDIO CONNECTORS 3 Pin XLR and 1/4 Cable Connectors Nickel Housing and Contacts 10-20512 MilesTek XLR Female 3-Conductor $2.75 10-20015 MilesTek XLR Male 3-Conductor $2.50 10-26016 MilesTek ¼ Male Stereo $3.30 10-26015 MilesTek ¼ Male Mono $1.22 BELDEN-8412-F Audio Cable for XLR Plugs/Jacks (black reel) $1.60 ft. XLR Barrel Adapters 10-20949 MilesTek XLR M/M Barrel 3-Conductor $2.18 10-20948 MilesTek XLR F/F Barrel 3-Conductor $2.75 For Expert Customer Service, Call Our Sales Team Today! 45

COAXIAL BNC Connectors & Adapters BNC Crimp Plugs, 75 Ohm - Broadcast Digital Video High frequency HDTV serial digital video. Three piece crimp plug with captive center contact. PART # CABLE TYPE CRIMP SLEEVE PRICE 10-03001-204 RG59 20AWG, 1505A, 30 01003, Hex 0.255 $3.15 30 01004, 30 01005, 30 01006 10-03001-217 8218/VFM809, 1855A, 1856A Hex 0.178 $3.15 10-03001-215 RG179, 1520A, 1522A Hex 0.178 $3.15 10-03001-237 30 01031, 1694A, 1695A Hex 0.324 $3.15 10-03001-203 8281 Hex 0.324 $3.15 10-03001-202 8241, RG59 23 AWG Hex 0.255 $3.15 Tech Note: (1) (2) (4) Use BNC Plug Key Chart below. BNC Crimp Plugs, 50 Ohm - Analog Video, Ethernet Traditional NTSC Baseband Analog Video CRIMP PART # CABLE TYPE SLEEVE PRICE 10-02001-202 RG59/U (solid) 23 AWG 8241 Hex 0.255 $3.15 10-02001-203 8281 Hex 0.324 $3.15 10-02001-233 RG58A C/U, RG 223, 9907 Hex 0.213 $3.15 10-02001-201 RG58/U (solid), 8240 Hex 0.213 $3.15 50 W vs. 75 W BNC Traditional 50 W BNC connectors that are installed on 75W coaxial video cable cause digital signal distortion which results in digital transmission errors. The mechanical differences between the two types of connectors are the dielectric insulators and center pins. The 75W connector employs Teflon as a dielectric and air around its outer spring fingers as compared to Delrin surrounding the spring fingers of the 50W type. Also the 75W connector's center pin has the same diameter in the front and rear areas where the pin is crimped to the cable's center conductor; the 50W connector's pin has a larger diameter in the crimp area. Therefore, different crimp tools are required for two types of center pins. However, both types on connectors mate mechanically without physical damage. Nevertheless, the 50W connector is adequate for analog video applications. BNC Adapters BNC Adapters are offered in 50 W and 75 W versions. The 50 W type is sufficient for analog video. Although designed for digital video, the 75 W type will also operate with analog video. A B C D E F G H Tech Note: (2) (3) (4) Use BNC Plug Key Chart below. I J K L M MILESTEK BNC ELECTRICAL SPECIFICATIONS: Frequency Range: Tested to 3 GHz Working Voltage: 500 VRMS Dielectric Withstanding Voltage: 1500 VRMS VSWR: 1.05 + 0.1f (GHz) DC to 1 GHz Contact Resistance: Center Contact 1.5 milliohms, Outer Contact 1.0 milliohms Insulation Resistance: 5000 megohms (min.) Tek Note: BNC Plug Key Chart (1) Use center pin crimper 40-15002 for all Milestek 75 W BNC plugs. (2) Use 40-11209 Corex Cable Stripper for specified cable types. (3) Use 0.068 die cavity & 40 12001 to crimp the center pin on all Milestek 50 W BNC plugs. (4) May be crimped with either 3/8 or 1/2 crimp die. Cable strip dimensions applies to ALL 75 W BNC plugs, 50 W BNC plugs. 0.327 (braid) 0.146 (dielectric) 0.158 (center conductor) KEY PART # BNC ADAPTERS DESCRIPTION PRICE A 10-02904 50 W BNC T F/M/F $4.20 10-02946 50 W BNC T F/F/F $1.32 B 10-03946 75 W BNC T F/F/F $6.37 C 10-02914 50 W BNC Goal Post M/F/F $4.10 D 10-03914 75 W BNC Goal Post M/F/F $4.20 E 10-03900 75 W BNC Barrel F/F $4.15 F 10-02947 50 W BNC Barrel M/M $1.26 G 10-03947 75 W BNC Barrel M/M $4.62 H 10-03908 75 W BNC Right Angle M/F $8.40 I 10-01002 Weco Male (.090) to BNC Female $12.55 J 10-01066 Mini-Weco Male to BNC Female $16.75 K 10-02406-009 BNC 50 W Terminator 1 % 0.5W Resistor $2.10 L 10-02406-010 BNC 75 W Terminator, 1% 0.5W Resistor Analog Applications $2.63 M 10-03406-029 BNC 75 W Terminator, 0.1% 0.5W Resistor $4.15 Digital Applications 46 Stock Orders Shipped Same Day until 5 P.M. C.S.T

MILESTEK BNC FAQS Is the quality of MilesTek BNC's the same as other brands? Depending on the brand, MilesTek BNC's are equal to or exceed the quality of other competitors. For example, the MilesTek BNC plug bodies are machined from virgin brass in accordance with MIL-C39012 and then plated with bright nickel. Many other less expensive brands have cheaper die cast bodies. Furthermore, the MilesTek BNC body incorporates a beryllium copper wave washer to allow the BNC to flex during mating and to provide firm uninterruptible continuity of the shield signal. Teflon, the best dielectric, provides the proper dielectric for 75Ω impedance and securely holds the captive center pin. How is your BNC center pin different than some other brands? In order to be true 75Ω impedance, the center pin has the same diameter in the crimp area as the mating area. Our captive BNC pins are plated with 30 µ of gold in accordance with MIL-G-45204. Universal BNC Termination Kit BNC Tools More than 30 µ is unnecessary for normal use. Some competitive brands have a 75Ω body with 50Ω center pin to eliminate the necessity of a separate center pin crimper. If tested, the connector with 50Ω pin and 75Ω body produces an impedance of approximately 68Ω. Should the BNC body have enclosed beryllium copper spring fingers? One manufacturer promotes this idea. Unless the BNC is subject to abuse such as thousands of matings and foreign objects poking into the interface of the connector, this design is unnecessary. What about cable pull strength? Pull strength is important on small diameter cables such as 735A. MilesTek BNC plugs have diamond knurling for maximum cable retention. Out of 3,000 to 4,000 coaxial cable assemblies, MilesTek's BNC's for 735A recorded pull test performance of 49.3 Ibs. The minimum specification is 30 Ibs. 75 Ohm Pin Crimpers The 40-15002 precision tool crimps 75W BNC plug center pins. It has 4-way crimping dies per MS22520, full cycle ratchet, built-in pin locator and comfort grips. 40-15002 For Digital Video BNCs $89.25 40-15005 For Telco BNCs $99.75 COAXIAL PART # PRICE 40-50220 $236.25 Universal crimper frame with RG58/59 and RG179/8281 crimp dies Corex Cable stripper w/extra cassette Center conductor trimmer 75ohm pin crimper Round cable cutter BNC removal tool Center Conductor Trimmer The Center Conductor Trimmer automatically cuts the coaxial center conductor to the proper length for MilesTek BNC plugs. 40-15001 Center Conductor Trimmer $8.95 Corex II Coax Stripper The Corex II Stripper prepares coax cables with diameters from 0.100 to 0.305 Includes four color-coded V-blocks for different cable sizes and hex wrench. The 3-blade black cassette with strip dimensions of 0.327/0.146 is specifically designed for MilesTek BNC plugs. 40-11209 Corex (0.327/0.146) $75.60 40-11210 Corex Cassette (0.327/0.146) $26.25 Clothespin Stripper The Clothespin Stripper (CP) prepares RG58, RG59 and RG6/8281. The cassette cutting dimensions are in parentheses. Specifically-designed for MilesTek BNC plugs. 40-11310 CP 3-Bl. (0.327/0.146) $17.05 40-11311 CP 3-Bl. Cassette (0.327/0.146) $5.25 MilesTek Universal Crimper Use with MilesTek 3-piece BNC Crimp plugs. PART # FRAME & DIE PRICE 40-12100 RG58/59/62 $44.80 shown as 40-12100 40-12101 RG59/8281 $38.07 40-12115 RG179/8281 $40.18 For Expert Customer Service, Call Our Sales Team Today! Universal Crimper Die Sets 40-12002 RG58/59/62 Die Set: Hex size 0.255/0.213/0.068 $18.06 40-12003 RG59/8281 Die Set: Hex 0.324/0.255/0.068 $18.06 40-12015 RG179/8281 Die Set: Hex 0.324/0.178/0.068 $18.06 47

COAXIAL RG6 Dual Shield CATV CMR Rated Spool Box PART # AWG CONDUCTOR COLOR PUT-UP PRICE 30-01041-WHITE 18 CCS White 1000 ft. $112.88 30-01041-BLACK 18 CCS Black 1000 ft. $115.24 30-01042-WHITE 18 CCS White 500 ft. $63.00 30-01042-BLACK 18 CCS Black 500 ft. $60.38 RG6 Quad Shield CATV CMR Rated Spool Box PART # AWG CONDUCTOR COLOR PUT-UP PRICE 30-01043-WHITE 18 CCS White 1000 ft. $141.75 30-01043-BLACK 18 CCS Black 1000 ft. $141.75 Coax Cable, F-Connectors RG59 CCTV CMR Rated Spool Box PART # AWG CONDUCTOR COLOR PUT-UP PRICE 30-01046-WHITE 20 Solid BC White 1000 ft. $178.50 30-01046-BLACK 20 Solid BC Black 1000 ft. $181.13 RG59 with Siamese Power 18/2 CCTV CMR Rated Spool Box PART # AWG/CONDUCTORS CONDUCTOR COLOR PUT-UP PRICE 30-01047-WHITE RG59 + 18/2 Solid BC White 500 ft. $194.25 30-01047-BLACK RG59 + 18/2 Solid BC Black 500 ft. $186.38 F-TYPE CONNECTORS A B C D E F G H F-Type Connectors & Adapters KEY A 10-16013-202 F-Plug RG59 Crimp $0.47 A 10-16013-224 F-Plug RG6 Crimp $0.47 B 10-16041-202 F-Plug RG59 Universal Crimp $0.92 B 10-16041-224 F-Plug RG6 Universal Crimp $0.97 C 10-16908 F-Plug-Jack R/A Adapter $1.03 D 10-16935 F-Push-On Plug/F Jack $0.87 E 10-16410-002 F-Plug Terminator 75 W $0.21 F 10-16049 F-81 Bulkhead J/J w/hardware $0.24 G 10-16047 F-81 Bulkhead J/J w/hardware $0.90 H 10-16044 Single F Grounding Block $0.66 F-Type CATV Wallplates 60-10801 MilesTek Single F CATV Wallplate White $1.01 60-06801 MilesTek Single F CATV Wallplate Ivory $1.01 60-10802 MilesTek Dual F CATV Wallplate White $1.64 60-06802 MilesTek Dual F CATV Wallplate Ivory $1.64 F-Type Cables F-type cords have molded cable ends. Both cable and satellite can be run through RG6 F-type cords. Custom Cable lengths available. RG59 CATV Cables 33-100-36 3 ft. $1.85 33-100-72 6 ft. $2.27 33-100-144 12 ft. $3.33 33-100-300 25 ft. $5.26 RG6 CATV Cables 33-300-36 3 ft. $4.62 33-300-72 6 ft. $2.73 33-300-144 12 ft. $4.15 33-300-300 25 ft. $7.27 Video RF Splitters I J K L M KEY I 90-10112 2-Way 5-900 MHz Gold $3.36 J 90-10113 3-Way 5-900 MHz Gold $4.28 K 90-10114 4-Way 5-900 MHz Gold $4.75 N L 90-10115 6-Way 5-900 MHz $7.60 M 90-10116 8-Way 5-900 MHz $8.32 N 90-10117 2-Way 2 GHz Satellite $3.02 O 90-10118 4-Way 2 GHz Satellite $8.48 O F-Plug Installation Kit The F-plug installation kit has a crimper, 2-step coax cable stripper, round cable, flush cutter, two F-plug installation tools for RG59 and RG6, a blow molded case and instructions. CATV crimper frame/die terminates F-plugs for RG59 and RG6 both regular and quad shield connectors. 40-50223 CATV Kit $76.51 40-12116 CATV Crimper only $28.13 48 Stock Orders Shipped Same Day until 5 P.M. C.S.T

Compression Connectors F-Conn RG59 & RG6 Compression Connectors A full line of compression connectors specifically designed for ease of installation, the F-Conn system is the fastest way to terminate cable. Available for RG59 and RG6 cable, the new F-Conn universal connectors support both standard and quad-shield cable. Connector Features and Benefits: 80-pound pull strength between connector and cable Radial design provides 360 degree electrical continuity Internal O sealing rings prevent moisture migration Large ferrule surface insure s proper RF and Digital interface PART # CONNECTORS (5 PACK) PRICE 10-16020-202 RG59 F $2.96 10-16020-224 RG6 F $3.15 10-21002-240 RG59 RCA $8.31 10-21002-237 RG6 RCA $8.68 10-03100-240 RG59 BNC $15.08 10-03100-237 RG6 BNC $15.08 PART # 100 PIECE BULK PACKS PRICE 10-16020-202-BP RG59 F $57.28 10-16020-224-BP RG6 F $61.25 10-21002-240-BP RG59 RCA $152.25 10-21002-237-BP RG6 RCA $159.25 10-03100-240-BP RG59 BNC $266.00 10-03100-237-BP RG6 BNC $276.50 F-Conn Compression Tool for Compression Connectors Rugged, light weight: accommodates full-line of compression connectors Ratcheting handle doesn't release until connector is fully terminated MilesTek Coax Stripper for Compression Connectors (RG59, RG6, Mini RGB Coax) One Stripper does it all! Perfectly strips RG59, RG6, Mini 23-26 AWG RGB Coax Strips all appropriate cable types without changing out cartridge MilesTek Basic Coax Stripper for Compression Connectors (RG59, RG6 coax) Preset coaxial cable stripping tool - This stripper quickly and simply strips RG59 and RG6 coaxial cables for MilesTek compression type connectors. KEY PART# CONNECTOR PRICE A 40-40350 F-Conn Compression Tool $131.72 B 40-11412 MilesTek Coax Stripper $34.37 C 40-40396 MilesTek Basic Coax Stripper $25.76 B A COAXIAL C HDMI over Single RG6/SDI Coax Perfect for utilizing new or existing runs of RG6 CATV/broadband coax to upgrade analog video systems to fully digital platforms. Using a single RG6 coax, this device extends high definition HDMI 1.3 compliant devices up to 400 ft (120 M) and supports up to 1080P. Unique system allows signals from 2 input sources to transmit to 1 remote display. Cascade port is available on both transmitter and receiver, allowing signal expansion to multiple remote receivers. This starter kit package includes transmitter, receiver and remote control for switching between inputs. Additional receiver units, part # 90-12025, are sold separately. Extends high definition HDMI compliant devices up to 400 ft. (120 m) over 75 Ohm RG6 Dual or Quad Shield Supports resolution up to 1080P. Works with HDMI 1.3 and HDCP compliant devices. Consumer Electronics Control (CEC). Supports xvycc function. Extends range of HDMI by equalizing signals. Easy to install and simple to use. Video amplifier speed: 10.2 Gbps. Video amplifier bandwidth: 340MHz. Up to 36bit color depth. 90-12024 HDMI over Single RG6 Coax $381.82 90-12025 Receiver-Only for Cascading $210.00 For Expert Customer Service, Call Our Sales Team Today! 49

RACKS & ACCESSORIES SLIM 5 SERIES EQUIPMENT RACK ENCLOSURE Specify a Slim 5 when multiple racks need to be joined or when open sides are desirable. Ships ready-to-assemble to reduce shipping costs. Structural Featuresv Available in 20 and 26 useable depths Weight Capacity: Static load capacity, 1,000 lbs. UL Listed load capacity, 400 lbs. Wide range of cabinet options makes rack adaptable to a multitude of different installation environments Optional removable steel side panels provide security while attractive thermolaminate top and side panel options provide aesthetic appeal for home and studio installations Heavy-duty 14-gauge steel top and bottom contribute to unsurpassed rigidity of rack design Standard front and rear fixed 11-gauge, 10-32 threaded rackrail with marked rackspace increments to speed equipment mounting Optional casters can be bolted directly to bottom of rack or concealed in skirted base Unique mechanically interlocking corner joint is central to each unit s exceptional strength and eases assembly Bolt-together design allows for flat shipment via UPS 2 and w top and bottom electrical knockouts in rear of rack for cable pass-through NEW top accepts two fans UL Listed in the US and Canada Racks & Enclosures ENHANCED! additional cable tie points aesthetically pleasing silver or black anodized trim panels available 20 or 26 ENHANCED! top knockouts for fans unique mechanically interlocking corner joint provides superior strength 191/8 5-29 Thermolaminate Side and Top Colors Available: 50 26 deep Slim 5 shown with granite gray steel side panels shown with dark cherry side and top panels and plexiglass front door dark cherry honey maple 20 USEABLE DEPTH 26 USEABLE DEPTH MILESTEK PART # MA PART # PRICE MILESTEK PART # MA PART # PRICE RACKING HEIGHT OVERALL HEIGHT WEIGHT CAPACITY 50-70441 5-43 $375.19 50-70440 5-43-26 $425.75 75¼ (43 space) 79 400 lbs. 50-70442 5-37 $359.49 50-70437 5-37-26 $410.03 64¾ (37 space) 68½ 400 lbs. 50-70443 5-29 $342.64 50-70295 5-29-26 $393.19 50¾ (29 space) 54½ 400 lbs. 50-70444 5-21 $311.19 50-70435 5-21-26 $361.70 36¾ (21 space) 40½ 400 lbs. 50-70445 5-14 $276.36 50-70434 5-14-26 $326.90 24½ (14 space) 28¼ 400 lbs. 50-70446 5-8 $242.64 50-70438 5-8-26 $294.39 14 (8 space) 17¾ 400 lbs. light walnut Steel Side Panel Colors Available: black granite gray pepperstone (with slate sides) Lacer Bars available for enhanced cable management. Zero Space Rackshelf PART# SH-5A zero space full depth front and rear mount SH Series rackshelf Stock Orders Shipped Same Day until 5 P.M. C.S.T

Racks & Enclosures RACKS & ACCESSORIES casters add 3 7 /8 to overall cabinet height SLIM 5 SERIES EQUIPMENT RACK ENCLOSURE OPTIONS 5W set of 4 commercial grade casters 5WR set of 4 fine floor casters 5WL set of 4 commercial grade locking casters Door Options, Side Panels, Rear Access Pans, Rear Rackrail 5WLR set of 4 locking fine floor casters CBS-5 skirted base with 4 commercial grade non-locking casters, fits 20 depth models; CBS-5-26 fits 26 depth models CBS-5R skirted base with 4 fine floor non-locking casters, fits 20 depth models; CBS-5-26R fits 26 depth models RACK PART # SOLID FRONT DOOR PLEXI FRONT DOOR 5-43 DO-5-43 DOP-5-43 5-37 DO-5-37 DOP-5-37 5-29 DO-5-29 DOP-5-29 5-21 DO-5-21 DOP-5-21 5-14 DO-5-14 DOP-5-14 5-8 DO-5-8 DOP-5-8 5-43-26 DO-5-43 DOP-5-43 5-37-26 DO-5-37 DOP-5-37 5-29-26 DO-5-29 DOP-5-29 5-21-26 DO-5-21 DOP-5-21 5-14-26 DO-5-14 DOP-5-14 5-8-26 DO-5-8 DOP-5-8 Suffix part number with GY for granite gray finish. *Custom width cable chases available, please call for details. **Replace ÂxxÊ with DC=Dark Cherry, MP=Maple, LW=Light Walnut or PS=Pepperstone top (slate sides) POWER DISTRIBUTION AND LIGHTING TRIM PANELS ADJUSTABLE SPLIT REAR RACKRAIL vertical and rackmount power and lighting available, please see pgs. 64-79 Installation and Ordering Notes STEEL SIDE PANELS, PAIR TOP AND SIDE PANELS** REAR ACCESS PANEL ADJUSTABLE SPLIT REAR RACKRAIL CABLE CHASE 3 WIDE* SP-5-43 TSP-5-43xx RAP43 5AR43 5CC43 SP-5-37 TSP-5-37xx RAP37 5AR37 5CC37 SP-5-29 TSP-5-29xx RAP29 5AR29 5CC29 SP-5-21 TSP-5-21xx RAP21 5AR21 5CC21 SP-5-14 TSP-5-14xx RAP14 5AR14 5CC14 SP-5-8 RAP8 5AR8 5CC8 SP-5-43-26 TSP-5-43-26xx RAP43 5AR43-26 5CC43-26 SP-5-37-26 TSP-5-37-26xx RAP37 5AR37-26 5CC37-26 SP-5-29-26 TSP-5-29-26xx RAP29 5AR29-26 5CC29-26 SP-5-21-26 TSP-5-21-26xx RAP21 5AR21-26 5CC21-26 SP-5-14-26 TSP-5-14-26xx RAP14 5AR14-26 5CC14-26 SP-5-8-26 RAP8 5AR8-26 5CC8-26 PART # FINISH 5-CAVTRIM silver brushed and anodized 5-BAVTRIM black brushed and anodized top and bottom trim panels available to match the finish of the products mounted within the enclosure, includes 2 pieces Facilitates rear hanging of equipment Permits panels to be mid-mounted All brackets, rails and hardware included Cable chase kit required when using this option with ganged enclosures Works with steel side panels only; will not accommodate wood side panels 5AR37 installed on 5-37 Top and side panels are constructed from thermolaminated MDF. Will not work when using split rear rackrail options. WUSS and SH Series shelves need to be installed prior to installation of wood side panels, which conveniently lift off. Removable Steel Side Panels are vented top and bottom with recessed lift handles and internal locking clips. Made from 18-gauge steel and finished in a durable black textured powder coat, each side panel adds s per side to overall enclosure width. Side panels for 26 deep Slim 5 also available with granite gray finish. Doors are capable of being installed with a right or left swing and are equipped with a cam keylock and attractive flush handle. Requires the use of a cable chase when used in multi-bay installations. Doors provide 12 clearance. Rear access pans feature a unique no-hinge tip-out lift-off design with a laser knockout for cable pass-through on the bottom. Securing keylock included. Dimensions Cable Chase Top View 3.00 For Expert Customer Service, Call Our Sales Team Today! custom widths available Runner Kit low-friction runner allows the Slim 5 to easily slide in and out of credenzas and lecterns PART # FITS 5-RS20 20 deep models 5-RS26 26 deep models Trim Strips add the finishing touch to any installation without trim strip installed with trim strip installed 51

RACKS & ACCESSORIES ERK SERIES STAND-ALONE/GANGABLE RACK ENCLOSURES Aggressively Priced Stand-Alone Rack with Ganging Capabilities Specify an ERK when economy is required and solid sides are preferable. Provides unparalleled quality at an aggressive price. Structural Features Fully welded construction, combined with 16-gauge steel tops, bottoms, and sides, provides a 2,500 lb. weight capacity Standard front adjustable 11-gauge, 10-32 threaded rackrail with numbered rackspace increments to speed equipment mounting Finished in a durable black textured powder coat Thermal Management Front and side ventilation locations optimize convection Configurable open tops on all 44, 40 and 35 space ERKs accept a number of options for thermal management while 27, 21 and 18 space models feature a solid top with 2 laser knockouts that accept 4-1/2" fans Standard solid rear doors are configurable and accept a number of options for thermal management Cable Management 1/2, 3/4, 1 and 1-1/2 electrical knockouts found on removable split rear plates, top knockout plate additionally includes UHF/VHF antenna knockouts Multiple lacing points and slotted rail brackets add cable management convenience to ERKs Removable split rear plates allow cable bundles to be easily passed over or under the ERK s standard key-locking rear door Code Compliancy Seismic Certified to the 1997 UBC and 2001 CBC Seismic Zone 4 and the 2000 IBC, 2003 IBC, 2002 ASCE Standard 7 and 2003 NFPA 5000 Seismic Use Group III lateral force requirements for protecting 600 lbs. of essential equipment in upper floor installations when used with optional ERK-Z4 seismic floor anchor brackets (see pg. 32) with an Ip value of 1.5 Stud in the base of rack facilitates proper grounding and bonding of electronic equipment, as per NEBS and NEC standards UL Listed in the US and Canada ganging holes (laser knockouts) Racks & Enclosures 20 or 25 22 configurable open top on 44, 40 and 35 space models standard solid rear doors are configurable for enhanced thermal management, (27 to 44 space ERKs only) fully adjustable front rackrail standard locking rear door incorporates spring loaded latch to keep door closed without key rail brackets are prepunched for built-in cable management numbered rackspace increments speed equipment mounting ERKs feature 4 laser EKOs on sides, providing cable pass-through and ganging holes, allowing the ERK to be used in a multi-bay configuration without drilling (44, 40, 35 space models only), use GK4 4 ganging grommet kit to protect cables ERK-4425 52 20 OUTSIDE DEPTH (18 15 /32 USEABLE) MILESTEK PART # MA PART # PRICE 25 OUTSIDE DEPTH (23 15 /32 USEABLE) MILESTEK PART # MA PART # PRICE RACKING HEIGHT OVERALL HEIGHT 50-70554-44 ERK-4420* $681.32 50-70354-44 ERK-4425* $736.92 77 (44 space) 81 1/8 50-70554-40 ERK-4020* $642.55 50-70354-40 ERK-4025* $676.97 70 (40 space) 74 1/8 50-70554-35 ERK-3520* $572.91 50-70354-35 ERK-3525* $638.16 61 ¼ (35 space) 65 3/8 50-70554-27 ERK-2720* $525.71 50-70354-27 ERK-2725* $570.50 47 ½ (27 space) 51 3/8 50-70554-21 ERK-2120* $494.53 50-70354-21 ERK-2125* $541.38 36 ¾ (21 space) 40 7/8 50-70554-18 ERK-1820* $465.10 50-70354-18 ERK-1825* $512.26 31 ½ (18 space) 35 5/8 AXS slide out system is compatible in ERK rack. *available without rear door, suffix part # with ÂLRDÊ. Stock Orders Shipped Same Day until 5 P.M. C.S.T

Racks & Enclosures RACKS & ACCESSORIES Top Options (44, 40, 35 space models) ERK SERIES STAND-ALONE/GANGABLE RACK ENCLOSURE OPTIONS 2 standard ball bearing fans optional thermostatic fan control ERK-ST solid Door Options ERK-VT vented accommodates deeper DVRs ERK-10FT mounts one 10 fan NEW ERK-10FT-550CFM with fan ERK-10FT-FC with fan + control ERK-6FT mounts two 6 fans NEW ERK-6FT 440CFM with fans RACK FRONT DOORS PART # SOLID PLEXI REGULAR PERF VENTED LARGE PERF VENTED PLEXI VENTED ERK-44xx FD-44 PFD-44 VFD-44 LVFD-44 PVFD-44 ERK-40xx FD-40 PFD-40 VFD-40 LVFD-40 ERK-35xx FD-35 PFD-35 VFD-35 LVFD-35 ERK-27xx FD-27 PFD-27 VFD-27 ERK-21xx FD-21 PFD-21 VFD-21 LVFD-21 ERK-18xx FD-18 PFD-18 VFD-18 LVFD-18 ERK-4FT mounts three 42 fans NEW ERK-4FT-285CFM with fans ERK-4QFT-FC with quiet fans + control vented rear door, for ERKs ordered without rear door REAR DOOR VENTED ERK-VRD-44 ERK-VRD-40 ERK-VRD-35 ERK-VRD-27 ERK-VRD-21 ERK-VRD-18 POWER DISTRIBUTION & LIGHTING VERTICAL LACER STRIPS COPPER BUSS BARS vertical and rackmount power and lighting available please see pgs. 94-107 LACE-44LP 44 space 32 wide lacer strip, sold in pack of 6 LACE-P 45 space 2 wide lacer strip, sold in packs of 6 see pg. 91 LACE-40-OP 40 space 34 wide lacer strip, sold in packs of 6 BB-40 40 space 2 wide copper buss bar BB-44-1 44 space 1 wide copper buss bar ADDITIONAL RAIL, CASTER BASES 1,300 lb. weight capacity 700 lb. weight capacity RACK PART # ADD L 10-32 THREADED RACKRAIL COMMERCIAL GRADE CASTER BASES FINE FLOOR CASTER BASE ERK-4420 ERK-RR44 CBS-ERK-20 CBS-ERK-20R ERK-4020 ERK-RR40 CBS-ERK-20 CBS-ERK-20R ERK-3520 ERK-RR35 CBS-ERK-20 CBS-ERK-20R ERK-2720 ERK-RR27 CBS-ERK-20 CBS-ERK-20R ERK-2120 ERK-RR21 CBS-ERK-20 CBS-ERK-20R ERK-1820 ERK-RR18 CBS-ERK-20 CBS-ERK-20R ERK-4425 ERK-RR44 CBS-ERK-25 CBS-ERK-25R ERK-4025 ERK-RR40 CBS-ERK-25 CBS-ERK-25R ERK-3525 ERK-RR35 CBS-ERK-25 CBS-ERK-25R ERK-2725 ERK-RR27 CBS-ERK-25 CBS-ERK-25R ERK-2125 ERK-RR21 CBS-ERK-25 CBS-ERK-25R ERK-1825 ERK-RR18 CBS-ERK-25 CBS-ERK-25R For Expert Customer Service, Call Our Sales Team Today! REAR DOOR KNOCKOUT PANEL OPTIONS Fan Kit w/ 2 fans, 190 CFM Vent Panel Kit Filter Kit Blank Panel Kit KO-AWFP2 KO-VT3 KO-FILTER3 KO-WSB3 standard solid rear doors are configurable for enhanced thermal management ELECTRICAL ISOLATION KNOCKOUT PANEL ISO-KOP top or bottom mount Electrical Isolation Knockout Panel features non-conductive EKOs to isolate electrical conduit from the rack, see pg. 33 GROMMETS GK-4G GK4 VENT BLOCKER NEW GK-4G gland grommet. Hugs cables to reduce dust and control airflow within an enclosure,sold in packs of 4. Standard GK4 ganging grommet also available. VBK vent blockers available for Active thermal management, see pg. 115 53

RACKS & ACCESSORIES Wall Mount Cabinets WRP/WRS Series Low-Profile Wall Cabinets Specify a WRP or WRS when vertically wall mounting deep eqiupment Structural Features Unique design with 23 useable racking depth allows mounting of deeper equipment vertically in a parallel-to-the-wall orientation for space efficiency and aesthetics Standard adjustable 11-gauge, 10-32 threaded rackrail Solid hinged body swings either left or right Angled, hinged plexiglass (WRP Series) or solid steel (WRS Series) top cover allows convenient equipment access Top cover keyed separately from body keylock, providing user access to equipment controls while limiting access to rear equipment connections Finished in a durable putty powder coat (WRP Series) or black textured powder coat (WRS Series) powder coat Thermal Management Vented front and two bottom located fan mounting positions facilitate thermal management Cable Management Rackrail adjusts to provide a space from 1 to 4 between top cover and equipment faces, allowing abundant room for D-Ring cable managers Code Compliancy Grounding/bonding stud facilitates the proper grounding and bonding of electronic equipment, as per NEBS and NEC standards UL Listed in the US and Canada BLACK PART # PRICE PUTTY PART # PRICE RACKING HEIGHT USEABLE DEPTH WEIGHT CAPACITY 50-70191 $364.95 WRP-4 $403.76 7 (4 space) 23 150 lbs. 50-70192 $378.56 WRP-6 $417.38 101/2 (6 space) 23 150 lbs. 50-70193 $427.06 WRP-8 $456.19 14 (8 space) 23 150 lbs. A&E SPEC. # 96-068 SBX Series Wall Mount Cabinet Specify a WRP or WRS when vertically wall mounting deep eqiupment Structural Features Removable backpan simplifies installation and provides easy access to equipment connections Fully welded center section utilizes 18-gauge steel, backpan constructed from 14-gauge steel Locking front door swings open a full 180º on a virtually indestructible hinge for rugged security and unobtrusive accessibility Deep rail-to-door clearance ratio provides flexibility not found in flush-mount door designs Standard 11-gauge, 10-32 threaded rackrail with marked rackspace increments to speed equipment mounting Thermal Management Ventilation slots at top & bottom of each side promote passive thermal management Cable Management 2 and w electrical knockouts at top, bottom and rear facilitate cable entry PART # RACKING HEIGHT USEABLE DEPTH WEIGHT CAPACITY PRICE 50-70190 12 1/4 (7 space) 14 3/4 75 lbs. $263.97 50-70381 17 1/2 (10 space) 14 3/4 100 lbs. $370.72 locking hinged plexiglass top cover WRP-6 locking hinged body WRS-6 shown with top cover open laser knockout and electrical knockouts in backpan electrical knockouts in top and bottom includes door! adjustable rackrail provides ample room for D-Ring cable managers accepts two 4 1 / 2 fans (not included) WRP-6 unique vertical racking provides a generous 23 useable depth vented for cooling 28 1 / 2 17 25 1 / 4 removable backpan pre-mounts for easier installation SBX-10 rack is easily fastened to backpan with included security screws and driver bit 54 Stock Orders Shipped Same Day until 5 P.M. C.S.T

Wall Mount Racks RACKS & ACCESSORIES PIVOTING PANEL MOUNT, HINGED PANEL MOUNT AND WALL MOUNT OPEN FRAME RACK TIA/EIA COMPLIANT Pivoting Panel Mount The logical choice for wall mounting patch panels and network equipment, pivoting panel mounts are offered in 6, 12, and 18 depths and provide easy rear access. Innovative design with 90º positive stop facilitates punching down while fully open. Featuring abundant tie points for cable management, hook and loop cable fasteners and rugged steel construction, each unit is finished in a durable black powder coat. PART # OVERALL HEIGHT RACKING HEIGHT DEPTH WEIGHT CAPACITY PRICE 50-70565 5¾ 3 ½ (2 space) 6 20 lbs. $74.17 50-70566 9 ¼ 7 (4 space) 6 20 lbs. $85.38 50-70567 12 ¾ 10 ½ (6 space) 6 30 lbs. $92.16 50-41003 12 ¾ 10 ½ (6 space) 12 40 lbs. $152.80 50-41004 16 ¼ 14 (8 space) 12 60 lbs. $163.99 50-41005 16¼ 14 (8 space) 18 60 lbs. $188.71 50-41014 50-41014 50-41019 Hinged panel mounts feature holes to allow mounting directly to rackrail of any open frame rack Hinged Panel Mount Our HPM Series provides simple and straightforward wall mounting of rackmount components and can also be rackmounted to any 19 open frame rack. Hinged to provide rear access to mounted components, each of the 1, 2, 4, and 6 space units are 6 deep. Features abundant tie points for internal cable management, hook and loop fasteners, a smooth cutout in rear for cable pull-through and heavy-duty threaded rackrail. New Adjustable Depth HPM Series available. One side hinged at two points for easy rear access. Simple adjustable depth accommodates components from 9" - 15". Available in 4, 6 or 8 rackspace models. Built-in cable management. 50-70576 For Expert Customer Service, Call Our Sales Team Today! Adjustable depth HPM from 9 to 15 Rackspaces: 4, 6, or 8 VPM Versatile solution to wall mount racking. 50-70135 shown with HCM-2D horizontal cable manager fixed design prevents kinking or breaking of fiber-optics New Vertical Panel Mount Series is a cost effective, versatile solution to wall mount racking. Can accommodate all depths of equipment. Mounts horizontally or vertically allowing versatile component placement. Available in 2, 3 or 4 rackspace models. 200 lb. weight capacity Standard HPM Series PART # RACKING HEIGHT PRICE 50-41014 1¾ (1 space) $31.43 50-41001 3½ (2 space) $42.46 50-41009 7 (4 space) $51.70 50-41015 10½ (6 space) $60.69 50-70576 top dust cover acts as an equipment shelf $30.12 A self-squaring rack for mounting virtually any data or telecommunications component, the Wall Mount Open Frame Rack is quick and easy to assemble thanks to its self-aligning design. Rugged steel construction features 11-gauge, 10-32 threaded rackrail and a black textured powder coat finish. WM Series racks are offered in two depths (12 and 18 ), with models in heights ranging from 17¾ to 56¼. Includes rack screws PART # OVERALL HEIGHT RACKING HEIGHT DEPTH WEIGHT CAPACITY PRICE 50-70568 17¾ 14 (8 space) 12 200 lbs. $145.15 50-70569 30 26¼ (15 space) 12 200 lbs. $149.40 50-70570 56¼ 52½ (30 space) 12 175 lbs. $175.06 TIA/EIA COMPLIANT Wall Mount Open Frame Rack Adjustable HPM Series 50-41020 4 space, adjustable depth 9" - 15" $97.35 50-41021 6 space, adjustable depth 9" - 15" $103.64 50-41022 8 space, adjustable depth 9" - 15" $109.92 VPM Series 50-41025 2 rackspace, vertical panel mount $70.91 50-41026 3 rackspace, vertical panel mount $78.93 50-41027 4 rackspace, vertical panel mount $86.86 50-70571 17¾ 14 (8 space) 18 150 lbs. $166.50 50-70135 30 26¼ (15 space) 18 150 lbs. $181.42 50-70124 56¼ 52½ (30 space) 18 125 lbs. $202.78 55

RACKS & ACCESSORIES Swing Frame and 2-Post Racks Swing Frame Rack Open-back design maximizes useable wall space 90º opening with positive stop facilitates punching down of wires Ships ready-to-assemble to reduce space needed for storage and transport Unique, open swing frame design utilizes pivot points instead of hinges and can be inverted to allow opening from the left or the right. Durable black powder coat finish 50 rack screws included Abundant tie points and cable pass-throughs ease cable management Permanently lubricated bushings with a proprietary pivot prevent sag PART # OVERALL HEIGHT RACKING HEIGHT DEPTH WEIGHT CAPACITY PRICE 50-41006 27 1/4 21 (12 space) 12 100 lbs. $257.50 50-41029 41 1/4 35 (20 space) 12 100 lbs. $235.13 50-70572 27 1/4 21 (12 space) 18 100 lbs. $198.85 50-70573 41 1/4 35 (20 space) 18 100 lbs. $252.70 50-41030 50 43 3/4 (25 space) 18 100 lbs. $286.28 50-41031 27 1/4 21 (12 space) 24 100 lbs. $239.81 50-41032 41 1/4 35 (20 space) 24 100 lbs. $295.96 50-41033 50 43 3/4 (25 space) 24 100 lbs. $332.94 TIA/EIA COMPLIANT Open position 90 degree opening with positive stop to facilitate punch-down Steel 2-Post Relay Racks All-steel 19" equipment racks with 11-gauge steel side channels are self-squaring to speed up rack assembly. Rails are tapped on front and rear flanges with 10/32" threads and are spaced 5/8" - 5/8" - 1/2". Base has approximately 20" x 16" footprint and two assemblies. Two angles form top brace. Black powder-coat finish. 50 rack screws are provided for mounting shelves and panels. Optional 18" deep cantilever support base (20" x 24" A B footprint) offers extra stability for free-standing applications. No special tools required for assembly. Hex wrenches supplied. The 84"H rack has 45 rack spaces and the 72"H has 38 spaces. Self-aligning design speeds assembly 1600 lb. weight capacity 1/8" (11-gauge) steel channels for strength Aluminum top angles for easy field-drilling Stabilizer gussets on feet Durable black powder coat finish 50 rack screws included Optional cantilever support base available 10-32 threaded hardware available KEY A 50-70118 Steel Rack 19" x 84"H $243.20 50-70377 Steel Rack 19" x 72"H $229.32 B 50-70119 Cantilever Support Base $101.78 Aluminum 2-Post Relay Racks C 1600 lb. weight capacity 3/16" extruded aluminum uprights are 12-24 threaded front and rear Heavy duty 1/4" aluminum base is 15" deep for stability and includes holes for securing to floor Heavy duty 1/4" thick aluminum top angle provides extra stability for cable ladders Easy-to-assemble design saves on freight Includes 25 qty 12-24 rack screws Attractive silver brushed aluminum or black powder coat finish KEY C 50-70304 Black Aluminum Rack 19" x 84"H $189.44 50-99004 12-24 Rack Screws $23.80 56 Stock Orders Shipped Same Day until 5 P.M. C.S.T

Drawers/Rackshelves/Power Strips Rackmount Utility Drawers The rackmount 19" drawer has full-extension ball bearing slides, allowing maximum opening of 14", a face-mounted drawer pull, built-in catch to keep it closed and a convenient rear knock-out for cable runs. KEY 50-70389 2-Space $118.70 A 50-70175 3-Space $126.35 50-70176 4-Space $145.58 50-70177 Keylock $17.99 50-70178 Latch $13.51 Sliding Shelves/Tray/Drawer The heavy-duty sliding 19" shelf is made of 16-gauge steel. Occupying little more than one rack space, it latches in the open or closed position and has ball bearing shelf slides extending it to a 14" length. The 19" low-profile sliding shelf (1 space) extends 11" on 3/4" nylon roller slides, equipped with positive-stop lockouts. The 19" steel sliding rack tray (1 space) has ball bearing shelf slides. Its universal equipment fixing points allow attachment of a variety of equipment. The economy 19" rack drawer with face-mounted drawer pull is non-latching and non-locking. The one rack space drawer is made of steel, with ball bearing slides. A RACKS & ACCESSORIES Adjustable Telescoping Rackshelf Adjusts between front and rear rails 500# weight capacity Vented, 1 rack space 50-70815 16" - 26" $110.55 50-70816 27" - 44" $136.17 Heavy Duty Rackshelves Customize your cabinets and racks to fit your system with our wide array of rackmount shelves and accessories. Shelves are constructed of 16-gauge steel and are finished with a durable black powder-coat finish. F G H I J B KEY PART # DESCRIPTION WEIGHT CAPACITY USEABLE DEPTH PRICE B 50-70136 Heavy-Duty Sliding Shelf 50 lbs. 14 5 /16 $136.64 C 50-70198 Low-Profile Sliding Shelf 35 lbs. 14 $92.30 C KEY PART # DESCRIPTION RACK UNITS USEABLE DEPTH WEIGHT CAPACITY PRICE 50-70160 19" Solid Cantilever 1U 10 1/2 35 lbs. $29.84 F 50-70102 19" Solid Cantilever 2U 14 1/2 50 lbs. $37.82 G 50-70120 19" Vented Cantilever 3U 17 3/8 60 lbs. $74.33 H 50-70121 19" Vented Center-Mount 2U 17 7/8 50 lbs. $74.17 I 50-70187 19" Half Equipment Width 1U 9 1/2 25 lbs. $24.58 J 50-70216 Fixed Writing/Keyboard 2U 17 5/16 100 lbs. $99.86 POWER STRIPS Computer/Monitor Power Cord Cord is compatible with virtually all computers, monitors, printers, power strips and fax machines. 39-200-12 1 ft. $0.77 39-200-18 18 in. $2.17 39-200-24 2 ft. $2.85 39-200-36 3 ft. $4.31 39-200-72 6 ft. $1.66 39-200-120 10 ft. $2.29 39-200-180 15 ft. $3.02 39-200-300 25 ft. $7.72 For Expert Customer Service, Call Our Sales Team Today! APC Personal SurgeArrest Reliable surge protection for home or office computers and electronic equipment. Lightning and power surge protection Protection Working Indicator $50,000 Lifetime Equipment Protection PART # MODEL SURGE RATING (JOULES) PRICE AP-PER7 7 Outlet 240 $23.18 Basic Power Strip 6-outlet power strip is UL/CSA-listed to UL 1363/UL1449, with 1-MOV 90 Joules basic surge protection. PART # PRICE Has 3 power cord, integrated circuit 80-20105 $8.93 breaker and on/off rocker switch. 57

RACKS & ACCESSORIES RACK MOUNT POWER STRIPS The 50-70432 rackmount power distribution unit is equipped with 8 rear outlets, and one front outlet. Standard equipment includes surge and spike protection, EMI filtering, and a 9' cord. A generous 9" depth offers easy access to the 15 amp rear panel outlets, which are solidly mounted on yokes to eliminate deflection. An illuminated combination power switch/ circuit breaker is located on the front panel. UL listed in the US and Canada. Rack Power Strips front rear 50-70432 9 Outlet, Single 15 Amp Circuit, Surge/Spike Protected Rackmount Power Distribution with 9' Cord, Black Power Coat Finish $102.85 The 50-70726 rack mount power distribution unit with local and remote notification of surge suppression status is equipped with 8 rear outlets and one front outlet. Two front LED status indicators display the level of protection provided by the unit's 2 stage surge and spike suppression. The PD-915RV-RN provides notification of surge suppression status to any customer supplied monitoring device. front rear 50-70726 STAGE 1 INDICATOR STAGE 2 INDICATOR STATUS On On Full Protection Off On Stage 1 Compromised Stage 2 Active Off Off Load Unprotected 50-70726 9 Outlet, Single 15 Amp Circuit, Surge/Spike Protected Rackmount Power Distribution with 2 Stage Surge Suppression and Notification $160.62 MULTI-MOUNT RACK MOUNT POWER STRIPS Designed to optimize space and efficiency in power management, the new single circuit, 15 Amp rackmount power distribution system provides up to 20 outlets within a shallow depth. Versatile design allows for the unit to be mounted either horizontally or vertically in the rack Shallow 4" depth Up 20 total outlets, front and rear 9, 14 gauge SignalSafe power cord minimizes the effects of AC magnetic fields Reversible, adjustable mounting ears provide more flexible installation options with either 0º or 90º mounting Outlets are oriented in various directions to accommodate plugs of different shapes, sizes and orientations. When installed with 90º orientation, the unit supports heavy "wall wart" power supply plugs. Sequenced models also feature: Three channels of sequencing (two outlets per channel, 6 total) Local or remote control Adjustable sequencing delays up to 6 seconds LED power indication Surge protected models also feature: Two stages of protection, with remote status notification LED status indicators front rear 50-70723 50-70724 50-70725 50-70723 20 Outlet, Single 15 Amp Circuit, Multi-Mount Power $81.74 Distribution, 9Ê cord, 4 deep, Black Power Coat Finish 50-70724 20 Outlet, Single 15 Amp Circuit, Multi-Mount Power $100.53 Distribution, 9Ê cord, 4 deep, 10 Switched Outlets, Black Power Coat Finish 50-70725 18 Outlet, Single 15 Amp Circuit, Multi-Mount Power Distribution, 9Ê cord, 4 deep, 2-Stage Surge/Spike, Remote Notify, Black Power Coat Finish $120.33 58 Stock Orders Shipped Same Day until 5 P.M. C.S.T

Rack Cable Management RACKS & ACCESSORIES Horizontal Cable Managers Organize patch cords and maintain a required bend radius. Available in a wide variety of styles to suit any application. The D-Ring provides a creative solution for adding individual D-Rings to a rack or on a wall using appropriate fasteners. For optimal performance, do not exceed a 50% fill rate when passing cables through cable rings. Constructed from 16-gauge steel, and finished in a durable black powder coat. A J F K N L M P B C G O Q D H E KEY A 50-70376 1¾" (1 space) Micro-Clip Style $26.29 B 50-70114 1¾" (1 space) Micro-Clip Style, with End Rings $35.46 C 50-70374 1¾" (1 space) D-Ring Style $32.85 D 50-70117 1¾" (1 space) D-Ring Style, with End Rings $35.46 E 50-70375 3½" (2 space) D-Ring Style $35.46 F 50-70115 3½" (2 space) D-Ring Style, with End Rings $38.10 G 50-70132 1¾" (1 space) D-Ring, Front and Rear $40.74 H 50-70133 3½" (2 space) D-Ring, Front and Rear $43.37 I 50-70109 1¾" (1 space) Micro-Clip Style, with End Rings $34.07 J 50-70131 Wall-mount/Rackmount D-Ring $10.57 K 50-70130 D-Ring 2 5/16 w x 6 h $9.28 L 50-70129 D-Ring 2 5/16 w x 3 7/8 h $10.08 I R KEY M 50-70153 1-Space (1¾ ) Single Sided Slot Duct, 2 Deep $40.87 N 50-70184 Access Panel 2-Space $31.21 O 50-70185 Access Panel 4-Space $36.91 P 50-70186 Access Panel 6-Space $44.75 Q 50-70183 Filter Panel 3-Space $31.63 R 50-70155 Single Sided Center Slot Duct - 35 long $60.25 S 50-70156 Single Sided End Slot Duct - 35 long $58.80 S Rack Fasteners V W X Y Z KEY V 50-99002 Phillips Head 3 /4" Screw 100 pack ( 10 /32") $15.73 W 50-99008 Six Lobe Screw 50 pack $15.14 X 50-99009 Six Lobe Driver bit $12.71 Y 50-99005 Square Head Screw100 pack ( 10 /32") $25.64 Z 50-99006 Square Head Driver Bit $3.17 Flanged Blank Panels Black powder finish Horizontal Lacer Bars Economical & effective for cable management 5 styles for any application Finished in durable black powder coat A B C D E PART # RACK SPACES PRICE 50-70110 1 $7.02 50-70111 2 $9.50 50-70112 3 $12.97 For Expert Customer Service, Call Our Sales Team Today! PART # RACK SPACES PRICE 50-70174 4 $16.26 50-70577 5 $20.23 KEY A 50-70584 4" Offset Round Rod $7.81 B 50-70583 1.5" Offset Round Rod $7.01 C 50-70126 Round Rod $4.99 D 50-70127 Rectangular Bar $5.21 E 50-70211 L Bar $3.34 59

RACKS & ACCESSORIES Ladder Racks LADDER RACKS E D H I K P O G E B C L F F Rack mounting plate accommodates most cable ladders and includes mounting hardware and J-bolts as shown above. Typical application is shown below. A N L J M K Call MilesTek for 18 and 24 wide ladder rack options. KEY PART NO. DESCRIPTION COLOR PRICE A 50-70324 Ladder Rack 6'L x 12" W Black $67.00 A 50-71325 Ladder Rack 10'L x 12" W Black $112.26 B 50-70326 Outside Radius Runway Black $102.45 C 50-70328 Inside Radius Runway Black $95.95 D 50-70340 Triangular Support Bracket Black $40.44 E 50-70332 Wall Angle Bracket Black $27.45 F 50-70330 Rack Mounting Plate Black $42.70 G 50-70342 Cable Retaining Post Black $35.49 H 50-70344 Threaded Ceiling Kit Black $21.32 I 50-70346 5/8" x 6' Threaded Rod $38.47 J 50-70334 Vertical Wall Bracket (Pair) Black $17.74 K 50-70336 Junction Splice Kit (Pair) Black $9.51 L 50-70338 Butt Splice Kit (Pair) Black $8.87 M 50-70347 Foot Kit (Pair) Black $27.88 N 50-70350 J-Bolt Kit (Pair) $4.53 O 50-70349 Protective End Cap (Pair) Black $6.74 P 50-70516 90 Degree Corner Radius Black $116.27 60 Stock Orders Shipped Same Day until 5 P.M. C.S.T

Surface Raceway CABLE MANAGEMENT SURFACE RACEWAY SYSTEM Surface raceway, fittings and junction boxes are made of 94V-0 PVC and come in 6 ft. and 8 ft. lengths and three widths, ¾, 1¼ and 1¾. Ideal for low-voltage UTP and coaxial wire, surface raceway system is a one-piece latching duct designed to contain, route and protect wire and cable when not feasible to run it within the wall. One-piece design cable duct has a flexible hinge, allowing numerous openings without discoloration or stress cracking. Self-locking, hidden positive latch allows quick re-entry and secure cable installation. Wide raceway base/boxes have foam-backed adhesive to assist in quick installation. Rubber-based adhesive is pressure-sensitive foam tape with high ultimate bond strength, conforming to most any surface. Sold in single pieces or economical 20-piece boxes. Minimum 1 bend radius fittings. 2 deep single-gang and 1½ deep double-gang junction boxes offered. Fittings for 1 minimum bend radius conform to EIA/TIA CAT5e/5 requirements. *62.5/125/900 PVC OFNR CABLE/WIRE TYPE ¾ WIDE 1¼ WIDE 1 ¾ WIDE CAT5E UTP 4 Pair 2 7 14 CAT5E UTP 25 Pair 0 1 2 RG58/U 3 9 19 RG59/U & RG62/U 2 6 12 RG6/U 1 5 9 Fiber Optic 2 Strand* 4 11 23 Fiber Optic 4 Strand* 3 10 20 Fiber Optic 6 Strand* 2 8 16 Fiber Optic 8 Strand* 2 6 13 Fiber Optic 12 Strand* 2 5 11 (+F$) = additional freight charges apply 4 2 7 5 6 3 1 8 9 10 11 12 13 KEY DESCRIPTION IVORY WHITE OFFICE WHITE PRICE 1 Raceway ¾ w x ½ h x 6Êl, 20 pcs/box (+F$) 60-20120 60-20220 60-20320 $140.03 1 Raceway ¾ w x ½ h x 6Êl, 1 piece (+F$) 60-20121 60-20221 60-20321 $7.00 1 Raceway ¾ w x ½ h x 8Êl, 20 pcs/box (+F$) 60-20122 60-20222 60-20322 $186.70 1 Raceway ¾ w x ½ h x 8Êl, 1 piece (+F$) 60-20123 60-20223 60-20323 $9.34 2 Raceway 1¼ w x ¾ h x 6Êl, 20 pcs/box (+F$) 60-20124 60-20224 60-20324 $199.75 2 Raceway 1¼ w x ¾ h x 6Êl, 1 piece (+F$) 60-20125 60-20225 60-20325 $9.99 2 Raceway 1¼ w x ¾ h x 8Êl, 20 pcs/box (+F$) 60-20126 60-20226 60-20326 $266.33 2 Raceway 1¼ w x ¾ h x 8Êl, 1 piece (+F$) 60-20127 60-20227 60-20327 $13.32 3 Raceway 1¾ w x 1 h x 6Êl, 20 pcs/box (+F$) 60-20128 60-20228 60-20328 $286.24 3 Raceway 1¾ w x 1 h x 6Êl, 1 piece (+F$) 60-20129 60-20229 60-20329 $14.31 3 Raceway 1¾ w x 1 h x 8Êl, 20 pcs/box (+F$) 60-20169 60-20269 60-20369 $381.66 3 Raceway 1¾ w x 1 h x 8Êl, 1 piece (+F$) 60-20170 60-20270 60-20370 $19.08 4 Ceiling Drop ¾ 60-20160 60-20260 60-20360 $2.26 4 Ceiling Drop 1¼ 60-20161 60-20261 60-20361 $2.26 4 Ceiling Drop 1¾ 60-20162 60-20262 60-20362 $2.26 5 End Cap ¾¾ 60-20133 60-20233 60-20333 $1.25 5 End Cap 1¼ 60-20134 60-20234 60-20334 $1.39 5 End Cap 1¾ 60-20135 60-20235 60-20335 $1.51 6 Splice Cover¾¾ 60-20130 60-20230 60-20330 $1.25 6 Splice Cover 1¼ 60-20131 60-20231 60-20331 $1.39 6 Splice Cover 1¾ 60-20132 60-20232 60-20332 $1.51 7 Reducer 1¾ to 1¼ 60-20163 60-20263 60-20363 $1.26 7 Reducer 1¾ to ¾ 60-20164 60-20264 60-20364 $1.32 7 Reducer 1¼ to ¾ 60-20165 60-20265 60-20365 $1.52 8 Internal Cover 1 min. bend radius ¾ 60-20139 60-20239 60-20339 $1.40 8 Internal Cover 1 min. bend radius 1¼ 60-20140 60-20240 60-20340 $1.53 8 Internal Cover 1 min. bend radius 1¾ 60-20141 60-20241 60-20341 $1.66 9 Elbow Cover 1 min. bend radius¾1¾ 60-20151 60-20251 60-20351 $1.40 9 Elbow Cover 1 min. bend radius 1¼ 60-20152 60-20252 60-20352 $1.53 9 Elbow Cover 1 min. bend radius 1¾ 60-20153 60-20253 60-20353 $1.66 10 External Cover 1 min. bend radius ¾ 60-20145 60-20245 60-20345 $2.53 10 External Cover 1 min. bend radius 1¼ 60-20146 60-20246 60-20346 $2.74 10 External Cover 1 min. bend radius 1¾ 60-20147 60-20247 60-20347 $2.93 11 Tee Cover 1 min. bend radius ¾ 60-20157 60-20257 60-20357 $1.40 11 Tee Cover 1 min. bend radius 1¼ 60-20158 60-20258 60-20358 $1.53 11 Tee Cover 1 min. bend radius 1¾ 60-20159 60-20259 60-20359 $1.66 12 Junction Box 2 Depth 60-20166 60-20266 60-20366 $5.49 13 Junction Box Double Gang 1½ Depth 60-20167 60-20267 60-20367 $8.08 For Expert Customer Service, Call Our Sales Team Today! 61

CABLE MANAGEMENT Flexible Raceway 62 RESI-GARD FLEXIBLE RACEWAY Ideal for providing a main chase from the main distribution panel to a secondary hub in the attic or basement, Resi-Gard nonmetallic flexible raceway is available in ¾" to 2" diameter sizes with factory installed pull tape in sizes 1" to 2". The raceway is hand bendable, lightweight and easily cut to length to reduce scrap. Bright orange color clearly signifies a low voltage installation. PART # SIZE COIL LENGTH PRICE 70-80001 ¾ 100 feet $79.88 70-80002 1 100 feet $103.23 70-80003 1¼ 100 feet $125.87 70-80004 1½ 50 feet $74.57 70-80005 2 50 feet $102.67 COUPLINGS AND TERMINAL ADAPTERS Couplings for 1¼ to 2 Resi-Gard Raceway must be cemented using Resi-Gard Solvent Cement. A E D C B Resi-Gard Standard Couplings 70-80026 1¼ $0.64 70-80027 1½ $0.85 70-80028 2 $1.17 Quick Connect Couplings and Adapters Carlon one-piece quick connect couplings are designed for quick, easy installation. KEY A 70-80037 ¾" Snap-In Adapter $1.37 A 70-80038 1" Snap-In Adapter $2.06 B 70-80039 ¾" Threaded Adapter $1.98 B 70-80040 1" Threaded Adapter $2.98 C 70-80041 ¾" Coupling $1.13 Low Voltage Open Backed Boxes Designed with a hard shell thickness for increased durability. The Resi-Rings attached to the box allow you easy access to the cable while keeping it safely out of the way from other trades. KEY D 70-80043 1-Gang Bracket $1.89 70-80046 2-Gang Bracket $2.51 Old Work Brackets Designed specifically for the installation of low-voltage devices in an existing wall. The backless box design accommodates the space and bend radius requirements of coaxial or data/communications cables. KEY E 70-80044 Single $1.40 70-80047 Dual $2.79 Resi-Gard Conduit Clamps Carlon s orange conduit clamps are designed specifically for the installation of Resi-Gard Raceways. Sold in bags of 5. 70-80032 ¾ $2.29 70-80033 1 $3.82 70-80034 1¼ $4.38 70-80035 1½ $4.49 70-80036 2 $4.74 F Low Voltage Add-On Bracket The Add-On Bracket can be added-on to just about any nonmetallic electrical box. Resi-Rings for cable or ¾ Resi-Gard raceway attachment. KEY F 70-80045 Single Add-On Brackett $1.89 Resi-Gard Solvent Cement Resi-Gard Solvent Cement is ideal for easy, tight installation of all Resi-Gard flexible nonmetallic raceway, fittings and accessories. Available in pint sizes with convenient brush top applicator. PART # PRICE 40-40408 $14.48 Mud Rings A great alternative to metallic mud rings, this nonmetallic version is lighter in weight, has no sharp corners or edges and is offered in the distinctive orange color that signifies structured cabling components. PART # PRICE 70-80048 $1.24 The back is open to accommodate appropriate bend radiuses. Stock Orders Shipped Same Day until 5 P.M. C.S.T

Ducting, Tubing, Cable Supports CABLE MANAGEMENT Slotted Ducting Used for routing and protecting cable, slotted channel ducting is made from high-impact, rigid black PVC. The 3 wide ducting is available in 2 and 3 heights. The wiring duct covers provide a non-slip, plastic lining to ensure covers remain in place. The duct and cover are sold separately. 70-50299 3 W x 2 H x 6-ft. L Slotted Duct $36.34 70-50300 3 W x 3 H x 6-ft. L Slotted Duct $44.81 70-50301 3 W x 6-ft. L Duct Cover $13.27 Convoluted Tubing Organizes cables and wires into a neat path. Quick and easy installation is done by inserting wires through the split along the length of the polyethylene tubing. Longer lengths are also available. 70-50252 ½ x 10Ê Black $2.48 70-50253 ¾ x 10Ê Black $3.08 70-50254 1 x 10Ê Black $3.52 Wide Surface Cable Supports These cable supports provide proper support of high-performance cabling, including CAT5e, higher speed copper and fiber-optic cables. The hangers extra-wide surfaces protect against cable bending, crimping and snagging. Two sizes accommodate up to 16 and 80 four-pair UTP cables. The 2 diameter loop wide-base J-hook can hold up to 80 4-pair UTP cables. The small bundle J-hook will hold up to 16 4-pair UTP cables. The smaller J-hook s unique bend-back tab provides containment without pressure on cables. Both size J-hooks are made of spring steel. Basic cable hangers (1) and (5) may be nailed, screwed or bolted to surfaces or structures. The drop wire hangers (2) and (6) have a multi-function clip that attaches onto a vertical wire (#12 thru ¼ ). The J-hooks for tee bars (3) and (7) snap onto acoustic grids. The cable hangers (4) and (8) are hammered onto beams. The cable cat pulley (9) allows easy pulling of wire, up to 25 four-pair cable. Since the pulley s J- hook is the same as the Wide Base Basic J-hook 70-50214, the pulley may be permanently attached, or the pulley and pin assembly may be removed and used with another J-hook. KEY 1 70-50214 Wide Base Basic J-Hook $3.12 2 70-50215 Wide Base J-Hook Drop Wire Hanger $3.86 3 70-50216 Wide Base J-Hook Tee Bar $7.23 4 70-50217 Wide Base J-Hook Ham. Flange $6.51 5 70-50246 Sm. Bundle Basic J-Hook $1.48 6 70-50423 Cable Cat Pulley $22.28 7 70-50247 Sm. Bundle J-Hook Drop Wire Hanger $2.35 8 70-50248 Sm. Bundle J-Hook Tee Bar $4.62 9 70-50362 Sm. Bundle J-Hook Ham. Flange $4.18 3 1 2 5 4 7 8 9 10 11 12 Cable Rings & Spool KEY PART # DESCRIPTION SIZE PRICE 10 70-50231 Plastic Comp. D-Ring 1 7 /8 x 2 1 /4 $1.22 11 70-50232 Plastic Comp. D-Ring 3 1 /8 x 3 1 /4 $1.53 12 70-50233 Plastic Comp. D-Ring 5 1 /8 x 3 1 /4 $2.27 13 70-50235 Distribution Plastic Spool $1.12 14 70-50433 Cable Hanger 3 1 /4 x 2 1 /4 $3.82 15 70-50424 Bridle Ring 1/4 Thread $1.35 16 70-50426 Bridle Ring Screw Thread $1.79 17 70-50455 Aluminum D-Ring 3 1 /8 x 3 1 /4 $2.77 18 70-50454 Aluminum D-Ring 1 7 /8 x 2 1 /4 $2.50 19 70-50456 Aluminum D-Ring 5 1 /8 x 3 1 /4 $3.42 15 14 13 16 6 17 18 19 For Expert Customer Service, Call Our Sales Team Today! 63

CABLE MANAGEMENT Cable Ties 7 8 9 10 6 5 4 3 KEY PART NO. DESCRIPTION COLOR LENGTH WIDTH DIAMETER STRENGTH IN LBS. QTY PRICE 1 70-50108 Cable Tie Wrap Natural 4.00 0.10 0.75 18 100 $1.46 2 70-50257 Cable Tie Wrap Black 4.00 0.10 0.75 18 100 $1.88 3 70-50109 Cable Tie Wrap Natural 6.00 0.10 1.25 18 100 $3.38 4 70-50258 Cable Tie Wrap Black 6.00 0.10 1.25 18 100 $3.54 5 70-50110 Cable Tie Wrap Natural 8.00 0.19 2.00 50 100 $4.41 5 70-50404 Cable Tie Wrap Natural 11.80 0.19 3.00 50 100 $7.25 6 70-50259 Cable Tie Wrap Black 8.00 0.19 2.00 50 100 $4.52 6 70-50405 Cable Tie Wrap Black 11.80 0.19 3.00 50 100 $7.37 7 70-50219 Mount Tie Wrap Natural 8.00 0.19 2.00 50 100 $8.39 8 70-50298 Mount Tie Wrap Black 8.00 0.19 2.00 50 100 $9.00 2 1 High quality American made durable 6/6 natural nylon. The lowest insertion force with the highest tensile strength available. Velcro Wraps One Wrap Lineal - Reusable Cable Wraps Each roll is 25 lineal yards. PART NUMBER BY PACKAGING DESCRIPTION COLOR LENGTH 30/BAG PRICE 100/BAG PRICE 900/ROLL PRICE Cable Wrap Black 8 70-50318 $17.22 70-50329 $57.52 70-50340 $266.32 DESCRIPTION COLOR LENGTH 30/BAG PRICE 100/BAG PRICE Plenum Wrap Black 8 70-50466 $16.98 n/a Cable Wrap Black 12 70-50398 $24.08 70-50399 $92.96 PART # COLOR PRICE 70-50470 Black $41.22 64 Stock Orders Shipped Same Day until 5 P.M. C.S.T

PRODUCT FEEDBACK For Expert Customer Service, Call Our Sales Team Today! 65

PRODUCT INDEX NETWORKING CAT5E Bulk Cable PVC, Plenum...3 CAT6 Bulk Cable PVC, Plenum...3 Cross Connect Wire, Flat Silver Satin Cable...3 MilesTek RJ45 and RJ11 Modular Plugs...3 Leviton Decora Wall Plates and Inserts...8 Leviton QuickPort Single-Gang Wall Plates...9 Leviton Surface Mount Housing...9 Leviton Structured Media Centers, Modules...10 HellermannTyton Jacks, Wall Plates, Panels...11 Fiber Optic Patch Cords...12 Fiber Optic Patch Cords...12 Fiber Wall Mount and Rackmount Fiber Enclosures...12 HDMI Over LAN/Ethernet Extender...23 HDMI Over Dual CAT5E/CAT6 Splitters...24 HDMI Over Dual CAT5E/CAT6 Matrix Switchers...24 HDMI Over Single RG6/SDI Coax...25 RJ45 Boots...3 UTP Stripper and Crimper Tools...3 EZ-RJ45 Plugs and Tools...4 Uni-Network Tester...4 RJ45/RJ11 Modular Adapters/Couplers...4 Punch down Tools...4 CAT5E, CAT6, RJ11 Jacks...5 RCA, HDMI, USB, 3.5, BNC, Fiber, Binding Post and F-type Jacks...5 Plastic Insert Wall Plates...6 Stainless Steel Insert Wall Plates...6 Recessed Cable Plates...6 Wall Plate Mounting Brackets...6 Modular Multimedia Distribution Panels...6 Surface Mount Jacks...6 CAT5E and CAT6 Patch Cords...7 CAT5E and CAT6 Patch Panels...7 110 and Type-66 Wiring Blocks...7 Leviton CAT5E, CAT6, RJ11 Jacks...8 Leviton CAT5E, CAT6 Patch Panels...8 Fiber Plug-In Adapter Modules...12 10/100 Desktop Ethernet Switches...13 10/100 Rack Mount Ethernet Switches...13 10/100/1000 Gigabit Ethernet Switches...13 Fast Ethernet MM Converters...13 Gigabit Ethernet Converters...13 USB Cables...14 USB Over CAT5E/CAT6 Extender Sets...14 USB 2.0 Over CAT5E/CAT6 Active Extender Sets...15 AV DISTRIBUTION HDMI Cables and Adapters...16 HDMI Splitters and Switches...17 HDMI Matrix Switches...18 HDMI Over Dual CAT5E/CAT6 Extenders...19-20 HDMI Over Single CAT5E/CAT6 Extenders...21-22 HDMI Over Single Fiber Optics...26 HDMI Converters (USB, VGA, SDI, Component, Composite)...27-30 HDMI Wireless Extender...31 VGA Cables...32 VGA Decora-Style Wall Plates...32 VGA Aluminum Wall Plates...33 HD15/DB15 Gender Changes...33 VGA Splitters/Amplifiers...34 VGA Switches and Matrix Switchers...35 VGA with Audio Over CAT5E/CAT6 Extenders...36-37 VGA with Audio Over CAT5E/CAT6 Splitters...38 AV Feed-Thru Wall Plates (HDMI, Component, VGA, Whole House Audio)...39 Component Video (RGB) Cables...39 3.5 mm Stereo Audio Patch Cords...40 Stereo Audio/Video RCA Patch Cables...40 RG59 BNC and RCA Cables...40 S-Video Cables...40 AV Quick-Connect Cabling System VGA...41 66 Stock Orders Shipped Same Day until 5 P.M. C.S.T

PRODUCT INDEX F-Type CATV Wall Plates...48 F-Type Cables...48 Video RF Splitters...48 RG59 & RG6 Compression Connectors...49 Coax Strip and Compression Tools...49 Power Strips...57 Rack Mount Power Strips...58 Horizontal Cable Managers...58 Horizontal Lacer Bars...58 Rack Fasteners...58 Flanged Blank Panels...58 Ladder Racks...60 CABLE MANAGEMENT HellermannTyton Surface Raceway System...61 AV Quick-Connect Cabling System Component / Composite Video...41-42 AV Quick-Connect Cabling System DVI, HDMI...43 AV Quick-Connect Integrated Wall Plates...44 Interseries Adapters BNC, RCA, F, 3.5,1/4...45 XLR Microphone Cables...45 XLR Wall Plates...45 3 Pin XLR and 1/4 Cable Connectors...45 RACKS & ACCESSORIES Slim 5 Series Racks...50 ERK Series Racks...52 Wall Mount Cabinets...54 Carlon In-Wall Raceway System/Accessories...62 Ducting, Tubing, Cable Supports...63 Cable Ties...64 COAXIAL BNC Crimp Plugs, 75 Ohm - Broadcast Digital...46 BNC Crimp Plugs, 50 Ohm- Analog Video...46 BNC Adapters...46 BNC Termination Tools (Strippers, Crimpers)...47 RG6 Dual/Quad Shield CATV Bulk Cable...48 RG59 CCTV Bulk Cable...48 F-Type Connectors & Adapters...48 Pivoting Panel Mount...55 Hinged Panel Mount...55 Wall Mount Open Frame Rack...55 Swing Frame Racks...56 2-Post Relay Racks...56 Rackshelves and Drawers...57 Computer/Monitor Power Cords...57 For Expert Customer Service, Call Our Sales Team Today! 67

AS9100C / ISO CERTIFICATION 68 Stock Orders Shipped Same Day until 5 P.M. C.S.T

CREDIT APPLICATION CREDIT APPLICATION Milestek Corporation 1506 Interstate 35 W Denton, TX 76207 FAX TO: 940-898-1725 Contact Information Billing Information Contact Name AP Contact Name Company Name Company Name Address Address City State Zip City State Zip Phone Phone Fax Fax E-mail E-mail General Company Information Federal Tax ID Number Stock Symbol Tax Exempt (If exempt, please attached exemption certificate) Taxable Legal Structure (check all that apply) Corporation Partnership Sole Proprietor In Business Since Number of Employees Business Type D&B Number Bank References Bank Name Company Name Bank Address Bank Contact Bank Acct #/ Type Company Name Bank City/State/Zip Bank Phone Trade References Company/Contact Address City State Phone Fax 1. 2. 3. 4. Signature and Authorization The signature below represents and warrants that (a) the party siging below is an authorized representative of the company; and (b) that the information herein is a complete and accurate representation of the company's financial situation as of the date hereof. Any misrepresentation or fraudulent information provided will be the basis for default under this agreement. By Signing this form, I expressly authorize L-com Inc to contact the above references to determine credit worthiness. Signature Print Name Date Business Title For Expert Customer Service, Call Our Sales Team Today! 69

TERMS OF CONDITIONS The following are the terms and conditions ("Terms and Conditions") for the sale of products ("Products") by MilesTek Corp. ("MilesTek") to MilesTek's customers ("Customers"). PLEASE READ THIS AGREEMENT CAREFULLY. ANY DIFFER- ENT OR ADDITIONAL TERMS SET FORTH IN CUSTOMER'S PURCHASE ORDER OR SIMILAR COMMUNICATION ARE OBJECTED TO AND SHALL NOT BE BINDING ON THE COMPANY UNLESS A SEPARATE AGREEMENT HAS BEEN SIGNED BY AN AUTHORIZED OFFICER OF THE COMPANY. BY PLACING AN ORDER FOR PRODUCTS FROM THE COMPANY, OR BY ACCEPT- ING DELIVERY OF THE PRODUCTS DESCRIBED ON THE APPLICABLE PACK- ING SLIP, BILL OF LADING AND/OR INVOICE RECEIVED WITH THE PRODUCTS, YOU AGREE TO BE BOUND BY AND ACCEPT THESE TERMS AND CONDITIONS OF SALE. 1. ACCEPTANCE AND CANCELLATION OF ORDERS All orders are subject to acceptance by MilesTek in writing by a duly authorized agent of MilesTek; any written acknowledgement of receipt of an order shall not, in and of itself, constitute such acceptance. Orders accepted and processed by MilesTek may not be cancelled by Customer except as covered by the Limited Warranty. Non-Standard Parts are defined as Products which are special orders, custom orders, orders for non-standard products, products not customarily in stock or orders for value-added products. Non-standard products are Non-Cancelable and Non-Refundable and for these products, all sales are final. Cable Assemblies built-to-order in our facility are Non-Standard Products and are also Non-Cancelable/Non-Refundable ( NC/NR ). In the event of cancellation or other withdrawal of an order for any reason and without limiting any other remedy which MilesTek may have as a result of such cancellation or other withdrawal, reasonable cancellation or restocking charges, which shall include all expenses than incurred and commitments made by MilesTek, shall be paid by Customer to MilesTek. Customer requests to reschedule are subject to acceptance by MilesTek in its sole discretion. Orders may not be canceled or rescheduled after the order has been submitted by MilesTek to the shipment carrier. MilesTek reserves the right to allocate sales and limit quantities of selected Products among its customers in its sole discretion. Product specifications and availability are subject to change without prior notice. 2. PRICES Orders are billed at the prices (in US dollars) in effect at the time of shipment. Prices will be as specified by MilesTek and will be applicable for the period specified in MilesTek's quote. If no period is specified, quoted prices will be applicable for thirty (30) days. Most current pricing will be as displayed on the MilesTek website found at www.milestek.com, or any of itês affiliated websites (e.g. www.milestek1553.com, and others). The catalog reflects the latest pricing information available at the time of printing. Prices shown in the catalog are subject to change without notice. Prices are subject to increase in the event of an increase in MilesTek's costs or other circumstances beyond MilesTek's reasonable control. If Customer does not purchase the quantity upon which quantity prices are based, Customer will pay the non-discounted price for the quantity actually purchased and/or a cancellation or restocking fee. Prices are exclusive of taxes, impositions and other charges, including: sales, use, excise, value added and similar taxes or charges imposed by any government authority, international shipping charges, forwarding agent's and broker's fees, bank fees, consular fees, document fees and import duties. 3. TERMS OF PAYMENT All payments must be in US Dollars. For Domestic Orders We accept major credit cards MasterCard, VISA, American Express, and Discover. We also offer C.O.D. and Pre-paid by wire transfer, money order, company or personal check (personal check will delay order up to two weeks). Open Account Credit is available to businesses, schools and institutions or as otherwise specified by MilesTek subject to an approved credit application. To obtain a credit application, please contact any Customer Service or Sales Representative by calling 1-800-524-7444, or (+1) 940-484-9400. Or you may download a copy of the MilesTek Credit Application form. For International Orders We offer MasterCard, VISA, American Express, Discover, prepaid by wire transfer, cashier's check in U.S.Dollars, as well as open account credit to qualified institutions and businesses. We cannot accept personal checks or certified personal checks. Money orders can result in significant delays. Payment via Open Account Credit can be established for companies having three U.S. references. We also offer Pre-paid by wire transfer, a wire transfer fee of $25.00 must be included. Orders will not be accepted until funds have been received in full and Purchase Order (PO) has been received. Customer is responsible for duties and taxes. 3.1 TERMS OF PAYMENT For All Orders Customer agrees to pay the entire net amount of each invoice from MilesTek pursuant to the terms of each such invoice without offset or deduction. Orders are subject to credit approval by MilesTek, which may in its sole discretion at any time change the terms of Customer's credit, require payment in cash, bank wire transfer or by official bank check and/or require payment of any or all amounts due or to become due for Customer's order before shipment of any or all of the Products. If MilesTek reasonably believes that the Customer's ability to make payments may be impaired or if Customer fails to pay any invoice when due, MilesTek may suspend delivery of any order or any remaining balance thereof until such payment is made or cancel any order or any remaining balance thereof, and Customer will remain liable to pay for any Products already shipped and all Non-Standard Products ordered by Customer. Customer agrees to submit such financial information as MilesTek may reasonably require for determination of credit terms and/or continuation of credit terms. Checks are accepted subject to collection and the date of collection will be deemed the date of payment. Any check received from Customer may be applied by MilesTek against any obligation owing by Customer to MilesTek under this or any other contract, regardless of any statement appearing on or referring to such check, without discharging Customer's liability for any additional amounts owing by Customer to MilesTek. The acceptance by MilesTek of such check will not constitute a waiver of MilesTek's right to pursue the collection of any remaining balance. Invoices not paid when due will bear interest to date of payment at the annual rate of eighteen (18%) percent or such lower rate as may be the maximum permitted by law. If Customer fails to make payment when due, MilesTek may pursue any legal or equitable remedies, in which event MilesTek will be entitled to reimbursement for costs of collection and reasonable attorneys' fees. There is a $25.00 service charge on all returned checks. 4. SALES TAX Only residents of the State of Texas need to remit sales tax. MilesTek does not remit sales tax to states other than Texas. Any sales tax due that is not collected by MilesTek is the responsibility of the customer. 5. DELIVERY AND TITLE All shipments by MilesTek are F.O.B. point of shipment, and the amount of all transportation charges will be paid to MilesTek by the Customer in addition to the purchase price of the Products. Subject to MilesTek's right of stoppage in transit, delivery of the Products to the carrier will constitute delivery to Customer and title and risk of loss will pass to Customer. MilesTek will make reasonable efforts to initiate shipment and schedule delivery as close as possible to Customer's requested delivery date(s). Customer acknowledges that delivery dates provided by MilesTek are estimates only and that MilesTek will not be liable for failure to deliver on such dates. Selection of the carrier and delivery route will be made by MilesTek unless specifically designated by Customer. MilesTek reserves the right to make deliveries in installments. Delay in delivery of one installment will not entitle Customer to cancel any other installment(s). Delivery of any installment of Products within thirty (30) days after the date requested will constitute a timely delivery. Delivery of a quantity which varies from the quantity specified shall not relieve Customer of the obligation to accept delivery and pay for the Products delivered. 70 Stock Orders Shipped Same Day until 5 P.M. C.S.T

TERMS OF CONDITIONS 6. MILESTEK'S LIMITED WARRANTY MilesTek warrants its products to be free from defects of workmanship and material. If any such defects occur, replacement will be made without charge to our Customers. We strive to provide 100% Satisfaction for our Customers to the best of our ability. This warranty does not cover normal wear and tear, and abuse. The warranty period depends upon the product. All products are covered by a LIMITED WARRANTY for a period of thirty (30) days from the date of shipment when purchased from MilesTek. Customer must notify MilesTek within 30 days from date of shipment of any defective product. An approved Return Materials Authorization (RMA) number must first be obtained from MilesTek prior to the return of any merchandise to MilesTek for inspection under warranty. Shipping charges for all materials returned under this Limited Warranty are to be prepaid by the Customer. This warranty is limited to the original purchaser. MilesTek's liability arising out of any sale of products to Customer is expressly limited to either (1) Credit or refund for the purchase price paid by Customer for such products (without interest), or (2) Repair and/or replacement of such products, found to be defective after inspection by MilesTek at its main headquarters, and such remedies shall be exclusive and in lieu of all others. Implied warranties of fitness for a particular purpose and merchantability are specifically excluded and shall not apply. Non-Standard products as defined in Section 1 above are not eligible for return for refund. Products returned for refund may be subject to a 20% restocking fee. Customer's obligations and MilesTek's remedies, with respect to defective or nonconforming products, are solely and exclusively as stated herein. Further, no warranty will apply if the Product has been subject to misuse, neglect, accident or modification, or has been soldered or altered in any way. All returns must be shipped to: TX 76207-2402 USA MilesTek Corp., 1506 Interstate 35W, Denton, 7. LIMITATION OF LIABILITIES In no event shall MilesTek be liable for any special, incidental or consequential damages of any nature including, but not limited to, damages resulting from loss of profit or revenue, recall costs, claims for service interruptions or failure to supply downtime, testing, installations or removal costs, costs of substitute products, property damage, personal injury, death or legal expenses. Customer's recovery from MilesTek for any claim shall not exceed the purchase price paid by Customer for the goods, irrespective of the nature of the claim, whether in warrant, contract or otherwise. CUSTOMER SHALL INDEMNIFY, DEFEND AND HOLD MILESTEK HARMLESS FROM ANY CLAIMS brought by any party regarding products supplied by MilesTek and incorporated into the customer's product. 8. USE OF PRODUCTS IN LIFE SUPPORT, NUCLEAR AND CERTAIN OTHER APPLICATIONS Products are intended for commercial use only. Products are traceable at the manufacturer's level only. Not all products have lot level traceability. Products sold by MilesTek are not designed, intended or authorized for use in life support, life sustaining, human implantable, nuclear facilities, or other applications in which the failure of such Products could result in personal injury, loss of life or catastrophic property damage. If Customer uses or sells the Products for use in any such applications: (1) Customer acknowledges that such use or sale is at Customer's sole risk; (2) Customer agrees that MilesTek is not liable, in whole or in part, for any claim or damage arising from such use; and (3) Customer agrees to indemnify, defend and hold MilesTek harmless from and against any and all claims, damages, losses, costs, expenses and liabilities arising out of or in connection with such use or sale. 9. STATEMENTS AND ADVICE If statements or advice, technical or otherwise, are offered or given to Customer, such statements or advice will be deemed to be given as an accommodation to Customer and without charge and MilesTek shall have no responsibility or liability for the content or use of such statements or advice. 10. FORCE MAJEURE MilesTek will not be liable for delays in delivery or for failure to perform its obligations due to causes beyond its reasonable control, including, but not limited to, product allocations, material shortages, labor disputes, transportation delays, unforeseen circumstances, acts of God, acts or omissions of other parties, acts or omissions of civil or military authorities, Government priorities, fire, strikes, floods, severe weather conditions, computer interruptions, terrorism, epidemics, quarantine restrictions, riots, or war. MilesTek's time for delivery or performance will be extended by the period of such delay or MilesTek may, at its option, cancel any order or remaining part thereof without liability by giving notice to Customer. 11. EXPORT CONTROL Products purchased or received under these Terms and Conditions are subject to export control laws, restrictions, regulations and orders of the United States. Customer agrees to comply with all applicable export laws, restrictions and regulations of the United States or foreign agencies or authorities, and shall not export, or transfer for the purpose of re-export, any product to any prohibited or embargoed country, including but not limited to The Balkans, Belarus, Burma, Cote d'ivoire, Cuba, the Democratic Republic of the Congo, Iran, Iraq, North Korea, Sudan, Syria, and Zimbabwe, or to any denied, blocked, or designated person or entity as mentioned in any such United States or foreign law or regulation. Customer represents and warrants that it is not: (i) on any the Denied Persons List (as compiled by the United States Department of Commerce), Specially Designated Nationals List (as compiled by the United States Treasury Department), Debarred Persons List (as compiled by the United States State Department) or any other United States or other government list of prohibited persons; and (ii) otherwise prohibited by United States or other law from purchasing the products or services hereunder. Customer shall be solely responsible to obtain any license to export, re-export or import as may be required. 12. GENERAL The Terms and Conditions may not be modified or cancelled without MilesTek's written agreement. Accordingly goods furnished and services rendered by MilesTek are sold only on the terms and conditions stated herein. The sale of Products hereunder will be governed by the Terms and Conditions, notwithstanding contrary or additional terms and conditions in any order purchase order, planning schedule, acknowledgment, confirmation or any other form or document issued by either party effecting the purchase and/or sale of Products. Notwithstanding any terms and conditions on Customer's order, the information and conditions on the Credit Application are controlling over Customer and MilesTek. Any conflicting statements or terms listed on the Customer purchase orders, invoice, confirmations or other Customer generated documents ("Customer Documents") whether heretofore or hereafter submitted are negated by submission of the Credit Application and the issuance of credit by MilesTek, and all different or additional terms and conditions contained in any Customer Documents are hereby objected to by MilesTek. MilesTek's performance of any contract is expressly made conditional on Customer's agreement to MilesTek's Terms and Conditions of Sale, unless otherwise specifically agreed in writing by MilesTek. In the absence of such agreement, commencement of performance and/or delivery shall be for Customer's convenience only and shall not be deemed or construed to be acceptance of Customer's terms and conditions, or any of them. No rights, duties, agreements or obligations hereunder may be assigned or transferred by operation of law, merger or otherwise, without the prior written consent of MilesTek. The obligations, rights, terms and conditions hereof will be binding on the parties hereto and their respective successors and assigns. The waiver of any breach of any term, condition or covenant hereof or default under any provision hereof will not be deemed to constitute a waiver of any other term, condition, or covenant contained herein or of any subsequent breach or default of any kind or nature. Any provision hereof which is prohibited or unenforceable in any jurisdiction shall, as to such jurisdiction, be ineffective to the extent of such prohibition or unenforceability without invalidating the remaining provisions hereof in that jurisdiction or affecting the validity or enforceability of such provision in any other jurisdiction. The Terms and Conditions will be governed by and construed in accordance with the laws of the State of Texas and the applicable laws of the United States. For Expert Customer Service, 71 Call Our Sales Team Today!

ORDER FORM 72 Stock Orders Shipped Same Day until 5 P.M. C.S.T

Solutions for Your Installation Challenges HDMI OVER FIBER see page 26 HDMI AUDIO EXTRACTOR CONVERTER see page 28 HDMI HDBASET SINGLE CAT5E/CAT6 EXTENDERS see page 21-22 ALL VIDEO TO HDMI CONVERTER see page 30 HDMI WIRELESS EXTENDER SET see page 31 VGA/HDMI WIRELESS PRESENTATION SYSTEM see page 31 For Expert Customer Service Call Today! 800-524-7444 milestek.com

1506 Interstate 35W Denton, TX 76207-2402 Order from MilesTek today 800-524-7444 milestek.com + Now even more connectivity solutions available! Milestek Has Been Acquired by L-Com For over 30 years, our commitment to quality and service as a complete connectivity solutions provider has helped MilesTek gain the trust of thousands customers all over the world. We re excited to provide even greater service and product options to our customers through our recent acquisition by L-Com. L-Com, a global designer and manufacturer of wired and wireless connectivity products, offers a wide range of solutions including cable assemblies, connectors, adapters, industrial networking components, and custom connectivity products, as well as a broad line of wireless products. We invite MilesTek customers to check out L-Com s product offering at L-Com.com. Contact MilesTek for your pricing and availability on any items that fit your application. Technical expertise, customer service and unbeatable value that s the MilesTek Advantage