Plug & Tighten series unique assembly solution ESY TO INST onnect directly to any 115V or 230V outlet HIGH URY Transducer controlled tool ESY TO USE Program via keypad on the tool or with software PUG & TIGHTEN TFEX PUG & TIGHTEN Easy to program 1 cycle Torque + ngle strategy capable DTU connection (DTU hardware required) - P external control - OK/NOK reporting and batch count TFEX Easy to change torque apable of up to 5 cycles Download tightening results on your P (VIP Flex software required) Production line With high duty cycle Prototyping Quality department Reworking/ackup tool 11
VIP 2.2 to 47.9 ft.lb. (3 to 65 Nm) MODE Ø1 Ø2 H mm in. mm in. mm in. EP1.5-15-. 28 1.10 27 1.06 45.5 1.79 EP1.5-20-. 28 1.10 27 1.06 45.5 1.79 EP1.5-26-. 28 1.10 27 1.06 45.5 1.79 EP2-20-. 28 1.10 27 1.06 45.5 1.79 EP2-30-. 28 1.10 27 1.06 45.5 1.79 EP2-40-. 35 1.38 27 1.06 51.5 2.03 EP2-65-. 40 1.57 30.5 1.20 57.5 2.26 Ø 2 Ø 1 H PI REF MODE PRT MODE PRT OUTPUT TORQUE ROTTION ENGTH WEIGHT NUMER NUMER DRIVE RNGE SPEED Torque Right angle tools - 230V Models Torque Torque + ngle Torque + ngle in. Nm ft.lb. mm in. kg lb rpm 230V EP1.5-15-T-2 615 165 312 0 EP1.5-15-T-2 615 165 323 0 Sq. 3 /8 3-15 2.2-11.0 1020 534.5 21.0 1.85 4.1 EP1.5-20-T-2 615 165 313 0 EP1.5-20-T-2 615 165 324 0 Sq. 3 /8 5-20 3.7-14.7 740 534.5 21.0 1.85 4.1 EP1.5-26-T-2 615 165 314 0 EP1.5-26-T-2 615 165 325 0 Sq. 3 /8 7-26 5.2-19.2 570 534.5 21.0 1.85 4.1 EP2-20-T-2 615 165 315 0 EP2-20-T-2 615 165 326 0 Sq. 3 /8 5-20 3.7-14.7 1320 559.5 22.0 2.0 4.4 EP2-30-T-2 615 165 316 0 EP2-30-T-2 615 165 327 0 Sq. 3 /8 7-30 5.2-22.1 1020 559.5 22.0 2.0 4.4 EP2-40-T-2 615 165 317 0 EP2-40-T-2 615 165 328 0 Sq. 3 /8 10-40 7.4-29.5 800 570.0 22.4 2.1 4.6 EP2-65-T-2 615 165 318 0 EP2-65-T-2 615 165 329 0 Sq. 3 /8 15-65 11-47.9 510 581.5 22.9 2.2 4.8 Right angle Tflex tools - 230V Models EP2-30-TF2 615 165 404 0 Sq. 3 /8 6-30 4.4-22.1 1020 559.5 22.0 2.0 4.4 EP2-65-TF2 615 165 405 0 Sq. 3 /8 15-65 11-47.9 510 581.5 22.9 2.2 4.8 rpm 110V EP1.5-15-T-1 615 165 334 0 EP1.5-15-T-1 615 165 345 0 Sq. 3 /8 3-15 2.2-11.0 1200 534.5 21.0 1.85 4.1 EP1.5-20-T-1 615 165 335 0 EP1.5-20-T-1 615 165 346 0 Sq. 3 /8 5-20 3.7-14.7 740 534.5 21.0 1.85 4.1 EP1.5-26-T-1 615 165 336 0 EP1.5-26-T-1 615 165 347 0 Sq. 3 /8 7-26 5.2-19.2 570 534.5 21.0 1.85 4.1 EP2-20-T-1 615 165 337 0 EP2-20-T-1 615 165 348 0 Sq. 3 /8 5-20 3.7-14.7 1320 559.5 22.0 2.0 4.4 EP2-30-T-1 615 165 338 0 EP2-30-T-1 615 165 349 0 Sq. 3 /8 7-30 5.2-22.1 1020 559.5 22.0 2.0 4.4 EP2-40-T-1 615 165 339 0 EP2-40-T-1 615 165 350 0 Sq. 3 /8 10-40 7.4-29.5 800 570.0 22.4 2.1 4.6 EP2-65-T-1 615 165 340 0 EP2-65-T-1 615 165 351 0 Sq. 3 /8 15-65 11-47.9 510 581.5 22.9 2.2 4.8 Right angle tools - 110V Models Right angle Tflex tools - 110V Models EP2-30-TF1 615 165 402 0 Sq. 3 /8 6-30 4.4-22.1 1020 559.5 22.0 2.0 4.4 EP2-65-TF1 615 165 403 0 Sq. 3 /8 15-65 11-47.9 510 581.5 22.9 2.2 4.8 In-line tools - 230V Models rpm 230V EDP1.5-15-T-2 615 165 319 0 EDP1.5-15-T-2 615 165 330 0 Hex. 1 /4F 3-15 2.2-11.0 1010 491.5 19.3 1.7 3.7 EDP2-24-T-2 615 165 320 0 EDP2-24-T-2 615 165 331 0 Hex. 1 /4F 5-24 3.7-17.7 1390 516.5 20.3 1.8 3.9 EDP2-33-T-2 615 165 321 0 EDP2-33-T-2 615 165 332 0 Sq. 3 /8 7-33 5.2-24.3 1010 508.5 20.0 1.85 4.1 EDP2-43-T-2 615 165 322 0 EDP2-43-T-2 615 165 333 0 Sq. 3 /8 8-43 5.9-31.7 780 508.5 20.0 1.85 4.1 In-line tools - 110V Models rpm 110V EDP1.5-15-T-1 615 165 341 0 EDP1.5-15-T-1 615 165 352 0 Hex. 1 /4F 3-15 2.2-11.0 1010 491.5 19.3 1.7 3.7 EDP2-24-T-1 615 165 342 0 EDP2-24-T-1 615 165 353 0 Hex. 1 /4F 5-24 3.7-17.7 1390 516.5 20.3 1.8 3.9 EDP2-33-T-1 615 165 343 0 EDP2-33-T-1 615 165 354 0 Sq. 3 /8 7-33 5.2-24.3 1010 508.5 20.0 1.85 4.1 EDP2-43-T-1 615 165 344 0 EDP2-43-T-1 615 165 355 0 Sq. 3 /8 8-43 5.9-31.7 780 508.5 20.0 1.85 4.1 1 2 3 4 5 6 12 ESSORIES INUDED PRT NO. Horizontal bail 615 396 562 0 Reaction bar ring 615 396 551 5 OPTION ESSORIES ITEM PRT NO. 1 Mounting plate with telescopic spindle 615 396 547 0 2 2nd lever start (except Tflex tools) 615 396 553 0 3 Reaction handle 615 396 554 0 4 Horizontal bail, swivel 615 396 529 0 5 Vertical bail 467003 6 Plastic protective cover EP. -15/20/30 615 573 064 0 6 Plastic protective cover EP 2-40 615 573 065 0 6 Plastic protective cover EP 2-65 615 573 066 0 Plastic protective cover EDP 615 573 067 0 OPTION ESSORIES PRT NO. Power cable US 110V - 16.4ft (5m) with GFI 615 917 479 0 Power cable without plug 230V - 16.4ft (5m) 615 917 474 0 Power cable without plug 230V - 16.4ft (5m) with GFI 615 917 477 0 Power cable without plug 110V - 16.4ft (5m) 615 917 475 0 Power cable without plug 110V - 16.4ft (5m) with GFI 615 917 498 0 GFI (Ground Fault Interruptor) is an additional user safety protection. It is strongly recommended to have one if your line is not already protected
Data Transfer Unit Quality Insurance for Plug & Tighten tools (not compatible with Plug & Tighten TFlex) 90 (3.54") The DTU (Data Transfer Unit) is a reporting box and power tool supply for Plug & Tighten tools. P External control : The tool can be controlled by an external system for automatic solutions. OK / NOK reporting : Result outputs are available to ensure a perfect quality process. atch count : ompleted number of OK fastening (with a good result) are counted and reported. This ensures a complete high quality assembly (setup by pocket P). 330 (13") 250 (9.84") 300 (11.8") Weight: 6.6lbs (3kg) onsumption: 44 Watts TOO E PRT NO. MODE PRT DIMENSIONS NUMER WIDTH HEIGHT DEPTH mm in. mm in. mm in. DTU asic 615 936 045 0 90 3.5 250 9.8 190 7.5 Please also specify TOO E and POWER E Power cable DTU Tool cable VIP + + + Tool cable 110V 16.4ft (5m) 615 917 485 0 Tool cable 110V 32.8ft (10m) 615 917 486 0 Tool cable 110V 49.2ft (15m) 615 917 487 0 Tool cable 230V 16.4ft (5m) 615 917 480 0 Tool cable 230V 32.8ft (10m) 615 917 481 0 Tool cable 230V 49.2ft (15m) 615 917 482 0 POWER E OPTION EXTENSION E PRT NO. US (110V) 8.2ft (2.5m) 615 917 203 0 US (230V) 8.2ft (2.5m) 615 004 085 7 PRT NO. Extension tool cable 32.8ft (10m) 615 917 483 0 Extension tool cable 65.6ft (20m) 615 917 484 0 VIP Flex software Up to 30 tightening results transfer to your P (only compatible with TFlex Tools) VIP Flex is a simple P software that will help you to download the first 30 readings via luetooth. MODE PRT NUMER VIP Flex 615 929 024 0 13
E-IT series n innovative battery tool onger life between charges with the 18V lithium-ion battery 2 MODES TO HOOSE FROM RUSHESS MOTOR I-ION TTERY SPEED MODUE E-IT premium Electronic brushless speed control (ES) E-IT plus Electronic brushless (E) lways the right speed 120 to 1,550 rpm MVI/MVI ody shop assembly Final assembly Interior dressing GI ny standard joints < 8.8 ft.lb 14
E-IT series - rushless motor 3.5 to 106 in.lb (0.4 to 12 Nm) - 120 to 1,550 rpm 62 (2.44 ) 178 (7 ) 230 (9 ) 212 (8.35 ) PI MODE PRT TORQUE ROTTION OUTPUT HEIGHT WEIGHT REF NUMER RNGE SPEED* DRIVE WITHOUT TTERY WITHOUT TTERY 77 (3.03 ) Nm in.lb rpm in mm in. kg lb E-IT premium - Electronic brushless speed control (ES) ES2.5-1550-P 615 165 419 0 0.4-2.5 3.5-22.1 500-1550 Hex. 1 /4 F 178 7 0.8 1.76 ES6-1000-P 615 165 420 0 0.8-6.0 7.1-53.1 300-1000 Hex. 1 /4 F 178 7 0.8 1.76 ES8-400-P 615 165 605 0 1.5-8.0 13.3-70.8 120-400 Hex. 1 /4 F 178 7 0.8 1.76 ES8-800-P 615 165 421 0 1.5-8.0 13.3-70.8 300-800 Hex. 1 /4 F 178 7 0.8 1.76 ES12-600-P 615 165 422 0 3.0-12.0 26.5-106 250-600 Hex. 1 /4 F 178 7 0.8 1.76 E-IT plus - Electronic brushless motor (E) E2.5-1250-P 615 165 415 0 0.4-2.5 3.5-22.1 1260 Hex. 1 /4 F 178 7 0.8 1.76 E6-900-P 615 165 416 0 0.8-6.0 7.1-53.1 910 Hex. 1 /4 F 178 7 0.8 1.76 E2.5-670-P 615 165 439 0 0.4-2.5 3.5-22.1 670 Hex. 1 /4 F 178 7 0.8 1.76 E6-670-P 615 165 440 0 0.8-6.0 7.1-53.1 670 Hex. 1 /4 F 178 7 0.8 1.76 E8-670-P 615 165 417 0 1.5-8.0 13.3-70.8 670 Hex. 1 /4 F 178 7 0.8 1.76 E12-600-P 615 165 418 0 3.0-12.0 26.5-106 600 Hex. 1 /4 F 178 7 0.8 1.76 *ontact your local supplier for specific speed requests ccessories ESSORIES INUDED PRT NO. djustment screwdriver 205 050 785 3 OPTION ESSORIES ITEM PRT NO. 7 4 1 6 2 3 5 8 9 attery type 1 i-ion attery 18V 1.3 h - 0.77lb (0.35 kg) 615 397 298 0 2 i-ion attery 18V 2.6 h - 1.32lb (0.60 kg) 615 397 299 0 harger 3 harger for i-ion 230V - Europe 615 397 300 0 3 harger for i-ion 120V - US 615 397 301 0 3 harger for i-ion 230V - UK 615 397 302 0 Miscellaneous 4 Speed setting module (ES version only) 615 396 829 0 5 Side handle 615 396 757 0 6 over protection 615 396 870 0 7 attery cover protection for battery 18V 1.3 h 615 396 871 0 7 attery cover protection for battery 18V 2.6 h 615 396 872 0 Suspension bail 443 703 8 Kit olour rings (7) 615 396 742 5 9 Pistol tool holster 615 804 914 0 luminium case 615 995 630 0 15