Interface Relays and Optocouplers Product group picture

Interface Relays and Optocouplers Product group picture /1 ABB Catalog 2CDC 1 004 C0208

Interface Relays and Optocouplers Table of contents Interface Relays and Optocouplers Interface Relays and Optocouplers /1 Product group picture /1 Table of contents /2 Pluggable interface relays /3 Product group picture /3 Table of contents /4 Benefits and advantages / Approvals and marks /6 Ordering details /7 Technical data /14 Technical data, Load limit curves /16 Load limit curves /17 Connection diagrams /18 Interface Relays R600, R00 /21 Product group picture /21 Table of contents /22 Benefits and advantages /23 Type designators /24 Interface Relays R600 /2 Selection /2 Benefits and advantages /27 Ordering details /28 Connection diagrams /30 Technical information /31 Interface Relays R00 /36 Selection /36 Ordering details /37 Technical information /38 Optocouplers /39 Product group picture /39 Table of contents /40 R600 Optocouplers /41 Selection /41 Ordering details /43 Connection diagrams /44 Technical data /4 R00 Optocouplers /49 Selection /49 Ordering details /0 Connection diagrams /1 Technical data /2 Interface Relays and Optocouplers Accessories /8 Table of Contents /8 R00 series component holder terminal blocks /9 Input optocoupler plugs /60 Transistor or MOS output optocoupler plugs /61 MOS or Triac output optocoupler plugs /62 Relay or analog plugs, fuse and strap plugs /63 Accessories /64 Accessories /6 Marking /66 2CDC 1 004 C0208 Catalog ABB /2

Product group picture /3 ABB Catalog 2CDC 1 004 C0208

Table of contents Pluggable interface relays Interface Relays and Optocouplers /1 Product group picture /1 Table of contents /2 Pluggable interface relays /3 Product group picture /3 Table of contents /4 Benefits and advantages / Approvals and marks /6 Ordering details /7 Technical data /14 Technical data, Load limit curves /16 Load limit curves /17 Connection diagrams /18 2CDC 1 004 C0208 Catalog ABB /4

Benefits and advantages Pluggable pcb relays CR-P Pluggable miniature relays CR-M Pluggable universal relays CR-U 9 different coil s DC versions: 12 V, 24 V, 48 V, 1 V AC versions: 24 V, 48 V, 1 V, 120 V, 230 V Output contacts: 1 c/o contact (16 A) or 2 c/o contacts (8 A) optionally equipped with gold contacts Logical or standard sockets Cadmium-free contact material Width of socket: 1, mm Pluggable function modules Reverse polarity protection/ Free wheeling diode LED indication RC elements Over protection 12 different coil s DC versions: 12 V, 24 V, 48 V, 60 V, 1 V, 12 V, 220 V AC versions: 24 V, 48 V, 60 V, 1 V, 120 V, 230 V Output contacts 2 c/o contacts (12 A) or 3 c/o contacts ( A) or 4 c/o contacts (6 A) optionally equipped with gold contacts, LED and free wheeling diode Integrated test button for manual actuation and locking of the output contacts (blue = DC, orange = AC) that can be removed if necessary With or without integrated LED Logical or standard sockets Cadmium-free contact material Width on socket: 27 mm Pluggable function modules Reverse polarity protection/ Free wheeling diode LED indication RC elements Over protection different coil s DC versions: 12 V, 24 V, 48 V, 1 V, 12 V, 220 V AC versions: 24 V, 48 V, 60 V, 1 V, 120 V, 230 V Output contacts 2 c/o contacts ( A) or 3 c/o contacts ( A) Integrated test button for manual actuation and locking of the output contacts (blue = DC, orange = AC) that can be removed if necessary With or without integrated LED Cadmium-free contact material Width on socket: 38 mm Pluggable function modules Reverse polarity protection/ Free wheeling diode LED indication RC elements Over protection Multifunction time module 1 1 1 2 2 2 3 4 3 3 4 4 4 1 Socket 1 Socket 1 Socket 2 Pluggable function module 2 Pluggable function module 2 Pluggable function module 3 Interface relay 3 Interface relay 3 Interface relay 4 Holder 4 Holder 4 Holder 4 Marker label / ABB Catalog 2CDC 1 004 C0208

Approvals and marks Kinds of sockets Kind of connecting terminals Standard sockets - Position of connecting terminals: Coil connection (A1-A2) on lower socket side, contact connections (n/o and n/c contacts) on the lower and upper socket side. Logical sockets - Position of connecting terminals: Coil connection (A1-A2) on lower socket side, all contact connections (common contacts, n/o and n/c contacts) on upper socket side. Screw type Spring type Fork type Details see connection diagrams Approvals and marks J existing j pending Relays Sockets Modules Approvals CR-P CR-M CR-U CR-PLS CR-PSS CR-PLC CR-M..L.. CR-M..SS CR-M..SF CR-U..S CR-U..E CR-U..SM CR-P/M CR-U G UL 08 J J 1) J cg CAN/CSA C22.2 No.14 J J 2) J J J J J J J J 6) J 7) F CAN/CSA C22.2 No.14 J J 3) J J VDE J J 4) J D GOST J J J J J J J J J J J P Lloyds Register J ) J E CCC J J J L RMRS J J J J J J J J J Marks a CE J J J J J J J J J J J 1) except 60 V DC and devices with gold contacts 2) except devices with gold contacts 3) except 60 V DC and devices 4) except devices ) only devices with 4 c/o contacts 6) except CR-P/M 42B, CR-P/M 42BV, CR-P/M 42C, CR-P/M 42CV, CR-P/M 2D, CR-P/M 62E, CR-P/M 62EV, CR-P/M 62D, CR-P/M 62DV 7) except CR-U 41B, CR-U 41BV, CR-U 41C, CR-U 41CV, CR-U 1D, CR-U 61CV, CR-U 61E, CR-U 61EV, CR-U 61D, CR-U 61DV, CR-U 91C, CR-U T 2CDC 1 004 C0208 Catalog ABB /6

Ordering details CR-P 2CDC 291 04 F0004 Description Interface relays are widely used in various industrial applications: As an interface they link the electronic controlling, e.g. PLC (programmable logic controller), PC or field bus systems, to the sensor / actuator level. Here, they take on various functions: Switching of AC or DC loads with different resistive, inductive and capacitive parts, switching s from a few mv up to 20 V, switching currents from a few ma up to 16 A, amplification of weak control signals, electrical isolation of control and load circuits, and signal multiplying. In contrast to electronic switching devices, interface relays don t use additional internal protective circuits and thus are overload-proof against short-time variations like current or peaks. Ordering details - CR-P range Rated control supply Outputs Contact ratings Type Order code Price Pkg Weight (1 pce) CR-P012DC1 1SVR40600R4000 24 V DC CR-P024DC1 1SVR40600R00 48 V DC CR-P048DC1 1SVR40600R6000 1 V DC CR-P1DC1 1SVR40600R8000 24 V AC 1 c/o (SPDT) 20 V, 16 A CR-P024AC1 1SVR40600R0000 48 V AC CR-P048AC1 1SVR40600R000 1 V AC CR-P1AC1 1SVR40600R7000 120 V AC CR-P120AC1 1SVR40600R2000 230 V AC CR-P230AC1 1SVR40600R3000 CR-P012DC2 1SVR40601R4000 24 V DC CR-P024DC2 1SVR40601R00 48 V DC CR-P048DC2 1SVR40601R6000 1 V DC CR-P1DC2 1SVR40601R8000 24 V AC 2 c/o (SPDT) 20 V, 8 A CR-P024AC2 1SVR40601R0000 48 V AC CR-P048AC2 1SVR40601R000 1 V AC CR-P1AC2 1SVR40601R7000 120 V AC CR-P120AC2 1SVR40601R2000 230 V AC CR-P230AC2 1SVR40601R3000 24 V DC CR-P024DC2 1SVR40606R00 24 V AC 2 c/o CR-P024AC2G 1SVR40606R0000 gold contact 20 V, 8 A 1 V AC CR-P1AC2G 1SVR40606R7000 230 V AC CR-P230AC2G 1SVR40606R3000 qty kg (lb) 0.014 (0.031) 0.014 (0.031) 0.014 (0.031) CR-PLS CR-PJ 2CDC 291 004 F0007 2CDC 291 006 F0011 Ordering details - Accessories Version Connection Type Order code Price Pkg terminal Logical socket with protective separation screw CR-PLS 1SVR4060R0000 screw CR-PLSx 1SVR4060R00 spring CR-PLC 1SVR4060R0200 Standard socket screw CR-PSS 1SVR4060R00 Plastic holder for socket CR-PH 1SVR4069R0000 Jumper bar for sockets with screw connection CR-PJ 1SVR4068R000 Marker CR-PM 1SVR4068R0000 Bold printed products = stocked products qty Weight (1 pce) kg (lb) 0.04 (0.099) 0.043 (0.09) 0.042 (0.093) 0.038 (0.084) 0.002 (0.004) 0.018 (0.040) 0.0002 (0.0004) /7 ABB Catalog 2CDC 1 004 C0208

Ordering details CR-M 2CDC 291 046 F0004 Description Interface relays are widely used in various industrial applications: As an interface they link the electronic controlling, e.g. PLC (programmable logic controller), PC or field bus systems, to the sensor / actuator level. Here, they take on various functions: Switching of AC or DC loads with different resistive, inductive and capacitive parts, switching s from a few mv up to 20 V, switching currents from a few ma up to 16 A, amplification of weak control signals, electrical isolation of control and load circuits, and signal multiplying. In contrast to electronic switching devices, interface relays don t use additional internal protective circuits and thus are overload-proof against short-time variations like current or peaks. Ordering details - CR-M range Rated control supply Outputs Contact ratings Type Order code Price Pkg Weight (1 pce) CR-M012DC2 1SVR40611R4000 24 V DC CR-M024DC2 1SVR40611R00 48 V DC CR-M048DC2 1SVR40611R6000 60 V DC CR-M060DC2 1SVR40611R4200 1 V DC CR-M1DC2 1SVR40611R8000 2 c/o (SPDT) CR-M12DC2 1SVR40611R8200 without LED 20 V, 12 A 220 V DC CR-M220DC2 1SVR40611R9000 24 V AC CR-M024AC2 1SVR40611R0000 48 V AC CR-M048AC2 1SVR40611R000 1 V AC CR-M1AC2 1SVR40611R7000 120 V AC CR-M120AC2 1SVR40611R2000 230 V AC CR-M230AC2 1SVR40611R3000 CR-M012DC3 1SVR40612R4000 24 V DC CR-M024DC3 1SVR40612R00 48 V DC CR-M048DC3 1SVR40612R6000 60 V DC CR-M060DC3 1SVR40612R4200 1 V DC CR-M1DC3 1SVR40612R8000 CR-M12DC3 1SVR40612R8200 220 V DC 3 c/o (SPDT) without LED 20 V, A CR-M220DC3 1SVR40612R9000 24 V AC CR-M024AC3 1SVR40612R0000 48 V AC CR-M048AC3 1SVR40612R000 CR-M060AC3 1SVR40612R200 1 V AC CR-M1AC3 1SVR40612R7000 120 V AC CR-M120AC3 1SVR40612R2000 230 V AC CR-M230AC3 1SVR40612R3000 CR-M012DC4 1SVR40613R4000 24 V DC CR-M024DC4 1SVR40613R00 48 V DC CR-M048DC4 1SVR40613R6000 60 V DC CR-M060DC4 1SVR40613R4200 1 V DC CR-M1DC4 1SVR40613R8000 4 c/o (SPDT) CR-M12DC4 1SVR40613R8200 without LED 20 V, 6 A 220 V DC CR-M220DC4 1SVR40613R9000 24 V AC CR-M024AC4 1SVR40613R0000 48 V AC CR-M048AC4 1SVR40613R000 1 V AC CR-M1AC4 1SVR40613R7000 120 V AC CR-M120AC4 1SVR40613R2000 230 V AC CR-M230AC4 1SVR40613R3000 qty kg (lb) Bold printed products = stocked products 2CDC 1 004 C0208 Catalog ABB /8

Ordering details Ordering details - CR-M range Rated control supply Outputs Contact ratings Type Order code Price Pkg Weight (1 pce) CR-M 2CDC 291 046 F0004 CR-M012DC2L 1SVR40611R40 24 V DC CR-M024DC2L 1SVR40611R10 48 V DC CR-M048DC2L 1SVR40611R60 60 V DC CR-M060DC2L 1SVR40611R4300 1 V DC CR-M1DC2L 1SVR40611R80 CR-M12DC2L 1SVR40611R8300 2 c/o (SPDT) 20 V, 220 V DC with LED 12 A CR-M220DC2L 1SVR40611R90 24 V AC CR-M024AC2L 1SVR40611R00 48 V AC CR-M048AC2L 1SVR40611R0 1 V AC CR-M1AC2L 1SVR40611R70 120 V AC CR-M120AC2L 1SVR40611R20 230 V AC CR-M230AC2L 1SVR40611R30 CR-M012DC3L 1SVR40612R40 24 V DC CR-M024DC3L 1SVR40612R10 48 V DC CR-M048DC3L 1SVR40612R60 60 V DC CR-M060DC3L 1SVR40612R4300 1 V DC CR-M1DC3L 1SVR40612R80 3 c/o (SPDT) 20 V, CR-M12DC3L 1SVR40612R8300 220 V DC with LED A CR-M220DC3L 1SVR40612R90 24 V AC CR-M024AC3L 1SVR40612R00 48 V AC CR-M048AC3L 1SVR40612R0 1 V AC CR-M1AC3L 1SVR40612R70 120 V AC CR-M120AC3L 1SVR40612R20 230 V AC CR-M230AC3L 1SVR40612R30 CR-M012DC4L 1SVR40613R40 24 V DC CR-M024DC4L 1SVR40613R10 48 V DC CR-M048DC4L 1SVR40613R60 60 V DC CR-M060DC4L 1SVR40613R4300 1 V DC CR-M1DC4L 1SVR40613R80 4 c/o (SPDT) CR-M12DC4L 1SVR40613R8300 with LED 20 V, 6 A 220 V DC CR-M220DC4L 1SVR40613R90 24 V AC CR-M024AC4L 1SVR40613R00 48 V AC CR-M048AC4L 1SVR40613R0 1 V AC CR-M1AC4L 1SVR40613R70 120 V AC CR-M120AC4L 1SVR40613R20 230 V AC2 CR-M230AC4L 1SVR40613R30 4 c/o (SPDT) 24 V DC LED and free-wheeling 20 V, 6 A CR-M024DC4LD 1SVR40614R10 diode 24 V DC CR-M024DC4G 1SVR40618R00 24 V AC 4 (SPDT) c/o CR-M024AC4G 1SVR40618R0000 gold contacts 20 V, 6 A 1 V AC CR-M1AC4G 1SVR40618R7000 230 V AC CR-M230AC4G 1SVR40618R3000 qty kg (lb) Bold printed products = stocked products /9 ABB Catalog 2CDC 1 004 C0208

Ordering details Rated control supply Outputs Contact ratings Type Order code Price Pkg Weight (1 pce) qty kg (lb) CR-M 2CDC 291 046 F0004 CR-M012DC4LG 1SVR40618R40 24 V DC CR-M024DC4LG 1SVR40618R10 48 V DC CR-M048DC4LG 1SVR40618R60 60 V DC CR-M060DC4LG 1SVR40618R4300 1 V DC CR-M1DC4LG 1SVR40618R80 4 c/o (SPDT) with gold 20 V / CR-M12DC4LG 1SVR40618R8300 220 V DC contacts and 6 A CR-M220DC4LG 1SVR40618R90 LED 24 V AC CR-M024AC4LG 1SVR40618R00 48 V AC CR-M048AC4LG 1SVR40618R0 1 V AC CR-M1AC4LG 1SVR40618R70 120 V AC CR-M120AC4LG 1SVR40618R20 230 V AC CR-M230AC4LG 1SVR40618R30 4 c/o (SPDT) with gold CR-M012DC4LDG 1SVR40618R4400 contacts, LED and 24 V DC free-wheeling CR-M024DC4LDG 1SVR40618R1400 diode Ordering details - Accessories Version Connection terminal Type Order code Price Pkg Weight (1 pce) CR-M4SS CR-MJ 2CDC 291 009 F0011 Logical socket for 2 c/o CR-M2LS 1SVR4061R10 Logical socket for 3 c/o screw CR-M3LS 1SVR4061R20 qty kg (lb) 0.0 (0.121) 0.062 (0.137) Logical socket for 2/4 c/o CR-M4LS 1SVR4061R30 0.066 (0.146) 0.06 Logical socket for 2 c/o CR-M2LC 1SVR4061R1200 (0.143) spring Logical socket for 2/4 c/o CR-M4LC 1SVR4061R3200 0.066 (0.146) Standard socket for 2 c/o CR-M2SS 1SVR4061R00 Standard socket for 3 c/o screw CR-M3SS 1SVR4061R2000 0.066 (0.146) 0.068 (0.10) Standard socket for 2/4 c/o CR-M4SS 1SVR4061R3000 0.070 (0.14) 0.040 Standard socket for 2 c/o CR-M2SF 1SVR4061R1300 (0.088) fork type Standard socket for 2/4 c/o CR-M4SF 1SVR4061R3300 0.048 (0.6) Plastic holder CR-MH 1SVR4069R00 Metal holder CR-MH1 1SVR4069R10 2 CR-MJ CR-MJ 1SVR4068R6000 CR-M CR-MM 1SVR4068R00 Bold printed products = stocked products 0.003 (0.007) 0.000 (0.001) 0.029 (0.064) 0.000 (0.001) 2CDC 1 004 C0208 Catalog ABB /

Ordering details Ordering details - CR-P/M range (all products stocked) Rated control supply Description Version Type Order code Price Pkg Weight (1 pce) qty kg (lb) CR-P/M... 2CDC 291 00 S0011 Diode - Reverse 6-230 V DC polarity protection/ CR-P/M 22 1SVR4061R0000 free wheeling diode red, CR-P/M 42 1SVR4062R0000 6-24 V DC Diode and green, CR-P/M 42V 1SVR4062R00 LED - Reverse polarity red, CR-P/M 42B 1SVR4062R4000 24-60 V DC protection/ green, CR-P/M 42BV 1SVR4062R40 free wheeling diode red, CR-P/M 42C 1SVR4062R9000 1-230 V DC green, CR-P/M 42CV 1SVR4062R90 6-24 V AC CR-P/M 2B 1SVR4063R0000 24-60 V AC Spark quenching CR-P/M 2D 1SVR4063R4000 1-230 V AC CR-P/M 2C 1SVR4063R00 6-24 V AC/DC red, for DC CR-P/M 62 1SVR4064R0000 green, for DC CR-P/M 62V 1SVR4064R00 24-60 V AC/DC red, for DC Diode and CR-P/M 62E 1SVR4064R4000 LED green, for DC CR-P/M 62EV 1SVR4064R40 1-230 red, for DC CR-P/M 92 1SVR4064R00 V AC/DC green, for DC CR-P/M 92V 1SVR4064R10 6-24 V AC/DC red, for DC CR-P/M 62C 1SVR406R0000 green, for DC CR-P/M 62CV 1SVR406R00 24-60 V AC/DC Varistor and red, for DC LED CR-P/M 62D 1SVR406R4000 Over green, for DC protection CR-P/M 62DV 1SVR406R40 1-230 red, for DC CR-P/M 92C 1SVR406R00 V AC/DC green, for DC CR-P/M 92CV 1SVR406R10 24 V AC CR-P/M 72 1SVR4066R0000 11 V AC Over protection CR-P/M 72A 1SVR4066R00 230 V AC CR-P/M 82 1SVR4066R2000 0.003 (0.007) 0.003 (0.007) 0.003 (0.007) 0.003 (0.007) 0.003 (0.007) 0.002 (0.004) Connection diagrams 2CDC 292 013 F000 2CDC 292 014 F000 2CDC 292 01 F000 CR-P/M 22 CR-P/M 42, CR-P/M 42B, CR-P/M 42C, CR-P/M 42V, CR-P/M 42BV, CR-P/M 42CV CR-P/M 2B, CR-P/M 2D, CR-P/M 2C 2CDC 292 016 F000 2CDC 292 017 F000 2CDC 292 018 F000 CR-P/M 62, CR-P/M 62E, CR-P/M 92, CR-P/M 62V, CR-P/M 62EV, CR-P/M 92V CR-P/M 62C, CR-P/M 62D, CR-P/M 92C, CR-P/M 62CV, CR-P/M 62DV CR-P/M 92CV CR-P/M 72, CR-P/M 82 CR-P/M 72A, /11 ABB Catalog 2CDC 1 004 C0208

Ordering details CR-U 2CDC 291 047 F0004 Description Interface relays are widely used in various industrial applications: As an interface they link the electronic controlling, e.g. PLC (programmable logic controller), PC or field bus systems, to the sensor / actuator level. Here, they take on various functions: Switching of AC or DC loads with different resistive, inductive and capacitive parts, switching s from a few mv up to 20 V, switching currents from a few ma up to 16 A, amplification of weak control signals, electrical isolation of control and load circuits, and signal multiplying. In contrast to electronic switching devices, interface relays don t use additional internal protective circuits and thus are overload-proof against short-time variations like current or peaks. Ordering details - CR-U range CR-U2S 2CDC 291 007 S0011 Rated control supply Outputs Contact ratings Type Order code Price Pkg CR-U012DC2 1SVR40621R4000 24 V DC CR-U024DC2 1SVR40621R00 48 V DC CR-U048DC2 1SVR40621R6000 1 V DC CR-U1DC2 1SVR40621R8000 220 V DC 2 c/o CR-U220DC2 1SVR40621R9000 without LED 20 V, A 24 V AC CR-U024AC2 1SVR40621R0000 48 V AC CR-U048AC2 1SVR40621R000 1 V AC CR-U1AC2 1SVR40621R7000 120 V AC CR-U120AC2 1SVR40621R2000 230 V AC CR-U230AC2 1SVR40621R3000 CR-U012DC3 1SVR40622R4000 24 V DC CR-U024DC3 1SVR40622R00 48 V DC CR-U048DC3 1SVR40622R6000 1 V DC CR-U1DC3 1SVR40622R8000 CR-U12DC3 1SVR40622R8200 220 V DC 3 c/o CR-U220DC3 1SVR40622R9000 without LED 20 V, A 24 V AC CR-U024AC3 1SVR40622R0000 48 V AC CR-U048AC3 1SVR40622R000 60 V AC CR-U060AC3 1SVR40622R200 1 V AC CR-U1AC3 1SVR40622R7000 120 V AC CR-U120AC3 1SVR40622R2000 230 V AC CR-U230AC3 1SVR40622R3000 12 V AC CR-U012DC2L 1SVR40621R40 24 V DC CR-U024DC2L 1SVR40621R10 48 V DC CR-U048DC2L 1SVR40621R60 1 V DC CR-U1DC2L 1SVR40621R80 220 V DC 2 c/o CR-U220DC2L 1SVR40621R90 with LED 20 V, A 24 V AC CR-U024AC2L 1SVR40621R00 48 V AC CR-U048AC2L 1SVR40621R0 1 V AC CR-U1AC2L 1SVR40621R70 120 V AC CR-U120AC2L 1SVR40621R20 230 V AC CR-U230AC2L 1SVR40621R30 CR-U012DC3L 1SVR40622R40 24 V DC CR-U024DC3L 1SVR40622R10 48 V DC CR-U048DC3L 1SVR40622R60 1 V DC CR-U1DC3L 1SVR40622R80 220 V DC 3 c/o CR-U220DC3L 1SVR40622R90 with LED 20 V, A 24 V AC CR-U024AC3L 1SVR40622R00 48 V AC CR-U048AC3L 1SVR40622R0 1 V AC CR-U1AC3L 1SVR40622R70 120 V AC CR-U120AC3L 1SVR40622R20 230 V AC CR-U230AC3L 1SVR40622R30 Ordering details - Accessories Version Type Order code Price Pkg Socket for 2 c/o and module CR-U2S 1SVR40670R0000 Socket for 3 c/o and module CR-U3S 1SVR40660R0000 Socket for 3 c/o CR-U3E 1SVR40660R00 Socket small for 2 c/o CR-U2SM 1SVR40670R10 Socket small for 3 c/o CR-U3SM 1SVR40660R10 Holder for CR-U socket CR-UH 1SVR40669R0000 qty qty Weight (1 pce) kg (lb) 0.083 (0.183) 0.083 (0.183) 0.083 (0.183) 0.083 (0.183) Weight (1 pce) kg (lb) Bold printed products = stocked products 2CDC 1 004 C0208 Catalog ABB /12

Ordering details Ordering details - CR-U range (all products stocked) Rated control supply Description Version Type Order code Price Pkg Weight (1 pce) qty kg (lb) CR-U... CR-U T 2CDC 291 004 S0011 2CDC 291 032 F000 Diode - Reverse 6-230 V DC polarity protection/ CR-U 21 1SVR40661R0000 free wheeling diode red, CR-U 41 1SVR40662R0000 6-24 V DC Diode and green, CR-U 41V 1SVR40662R00 LED - Reverse polarity red, CR-U 41B 1SVR40662R4000 24-60 V DC protection/ green, CR-U 41BV 1SVR40662R40 free wheeling diode red, CR-U 41C 1SVR40662R9000 1-230 V DC green, CR-U 41CV 1SVR40662R90 6-24 V AC CR-U 1B 1SVR40663R0000 24-60 V AC Spark quenching CR-U 1D 1SVR40663R4000 1-230 V AC CR-U 1C 1SVR40663R00 6-24 V AC/DC red, for DC CR-U 61 1SVR40664R0000 green, for DC CR-U 61V 1SVR40664R00 24-60 V AC/DC red, for DC CR-U 61E Diode and 1SVR40664R4000 LED green, for DC CR-U 61EV 1SVR40664R40 1-230 red, for DC CR-U 91 1SVR40664R00 V AC/DC green, for DC CR-U 91V 1SVR40664R10 6-24 V AC/DC red, for DC CR-U 61C 1SVR4066R0000 green, for DC CR-U 61CV 1SVR4066R00 24-60 V AC/DC Varistor and red, for DC CR-U 61D LED 1SVR4066R4000 Over green, for DC protection CR-U 61DV 1SVR4066R40 1-230 red, for DC CR-U 91C 1SVR4066R00 V AC/DC green, for DC CR-U 91CV 1SVR4066R10 24 V AC CR-U 71 1SVR40666R0000 11 V AC Over CR-U 71A protection 1SVR40666R00 230 V AC CR-U 81 1SVR40666R2000 24-240 V AC/DC Multifunction time module Connection diagrams pluggable onto CR-U2S and CR-U3S CR-U T 1SVR40667R0000 0.007 (0.01) 0.007 (0.01) 0.007 (0.01) 0.007 (0.01) 0.007 (0.01) 0.007 (0.01) 0.014 (0.031) All CR-U modules can be plugged onto sockets CR-U2S and CR-U3S. 2CDC 292 013 F000 2CDC 292 014 F000 2CDC 292 01 F000 CR-U 21 CR-U 41, CR-U 41B, CR-U 41C, CR-U 41V, CR-U 41BV, CR-U 41CV CR-U 1B, CR-U 1C CR-U 1D, 2CDC 292 016 F000 2CDC 292 017 F000 2CDC 292 018 F000 CR-U 61, CR-U 61E, CR-U 91, CR-U 61V, CR-U 61EV, CR-U 91V CR-U 61C, CR-U 61D, CR-U 91C, CR-U 61CV, CR-U 61DV CR-U 91CV CR-U 71, CR-U 81 CR-U 71A, /13 ABB Catalog 2CDC 1 004 C0208

Technical data Input circuit - coil data CR-P range Rated control supply U S Rated frequency Make (at 20 C) Maximum (at C) Break Rated power Coil resistance (at 20 C) Tolerance of coil resistance DC coils - 8.4 V DC 30.6 V DC 0.1 U S 0.4-0.48 W 360 % 24 V DC - 16.8 V DC 61.2 V DC 0.1 U S 0.4-0.48 W 1440 % 48 V DC - 33.6 V DC 122.4 V DC 0.1 U S 0.4-0.48 W 700 % 1 V DC - 77 V DC 280 V DC 0.1 U S 0.4-0.48 W 2200 % AC coils 24 V AC 0 / 60 Hz 19.2 V AC 28.8 V AC 0.1 U S 0.7 VA 400 % 48 V AC 0 / 60 Hz 38.4 V AC 7.6 V AC 0.1 U S 0.7 VA 10 % 1 V AC 0 / 60 Hz 88 V AC 132 V AC 0.1 U S 0.7 VA 8900 % 120 V AC 0 / 60 Hz 96 V AC 144 V AC 0.1 U S 0.7 VA 200 % 230 V AC 0 / 60 Hz 184 V AC 276 V AC 0.1 U S 0.7 VA 3800 % CR-M range Rated control supply U S Rated frequency Make (at 20 C) Maximum (at C) Break Rated power Coil resistance (at 20 C) Tolerance of coil resistance DC coils - 9.6 V DC 13.2 V DC 0.1 U S 0.9 W 160 % 24 V DC - 19.2 DC 26.4 V DC 0.1 U S 0.9 W 640 % 48 V DC - 38.4 V DC 2.8 V DC 0.1 U S 0.9 W 2600 % 60 V DC - 48.0 V DC 66.0 V DC 0.1 U S 0.9 W 4000 % 1 V DC - 88 V DC 121 V DC 0.1 U S 0.9 W 13600 % - 0 V DC 137, V DC 0.1 U S 0.9 W 16000 % 220 V DC - 176 V DC 242 V DC 0.1 U S 0.9 W 4000 % AC coils 24 V AC 0 / 60 Hz 19.2 V AC 26.4 V AC 0.2 U S 1.6 VA 18 % 48 V AC 0 / 60 Hz 38.4 V AC 2.8 V AC 0.2 U S 1.6 VA 640 % 60 V AC 0 / 60 Hz 48.0 V AC 66.0 V AC 0.2 U S 1.6 VA 930 % 1 V AC 0 / 60 Hz 88 V AC 121 V AC 0.2 U S 1.6 VA 340 % 120 V AC 0 / 60 Hz 96 V AC 132 V AC 0.2 U S 1.6 VA 3770 % 230 V AC 0 / 60 Hz 184 V AC 23 V AC 0.2 U S 1.6 VA 160 % CR-U range Rated control supply U S Rated frequency Make (at 20 C) Maximum (at C) Break Rated power Coil resistance (at 20 C) Tolerance of coil resistance DC coils - 9.6 V DC 13.2 V DC 0.1 U s 1. W 1 % 24 V DC - 19.2 V DC 26.4 V DC 0.1 U s 1. W 430 % 48 V DC - 38.4 V DC 2.8 V DC 0.1 U s 1. W 170 % 1 V DC - 88.0 V DC 121.0 V DC 0.1 U s 1. W 9200 % - 96.0 V DC 132.0 V DC 0.1 U s 1. W 100 % 220 V DC - 176.0 V DC 242.0 V DC 0.1 U s 1. W 37000 % AC coils 24 V AC 0 / 60 Hz 19.2 V AC 26.4 V AC 0.1 U s 2.8 VA (0 Hz) 7 % 2. VA (60 Hz) 48 V AC 0 / 60 Hz 38.4 V AC 2.8 V AC 0.1 U s 2.8 VA (0 Hz) 30 % 2. VA (60 Hz) 60 V AC 0 / 60 Hz 48.0 V AC 66.0 V AC 0.1 U s 2.8 VA (0 Hz) 47 % 2. VA (60 Hz) 1 V AC 0 / 60 Hz 88.0 V AC 121.0 V AC 0.1 U s 2.8 VA (0 Hz) 1700 % 2. VA (60 Hz) 120 V AC 0 / 60 Hz 96.0 V AC 132.0 V AC 0.1 U s 2.8 VA (0 Hz) 19 % 2. VA (60 Hz) 230 V AC 0 / 60 Hz 184.0 V AC 23.0 V AC 0.1 U s 2.8 VA (0 Hz) 2. VA (60 Hz) 7080 % 2CDC 1 004 C0208 Catalog ABB /14

Technical data Type CR-P...1 CR-P...2 CR-M...2 CR-M...3 CR-M...4 CR-U...2 CR-U...3 Output circuit(s) 11-12/14 11-12/14 11-12/14 11-12/14 11-12/14 21-22/24 21-22/24 21-22/24 21-22/24 11-12/14 11-12/14 31-32/34 31-32/34 31-32/34 21-22/24 41-42/44 31-32/34 Kind of output Relay, 1 c/o Relay, 2 c/o Relay, 2 c/o Relay, 3 c/o Relay, 4 c/o Relay, 2 c/o Relay, 3 c/o Contact material Rated operational U e (VDE 01, IEC 60947-1) Minimum switching AgNi AgNi AgNi/Au µm AgNi AgNi 20 V V AgNi AgNi/Au µm Maximum switching DC 300 V DC 20 V DC Minimum switching current AC 400 V AC 20 V AC ma (AgNi), 2 ma (AgNi/Au) Rated free air thermal current I th 16 A 8 A 12 A A 6 A A Rated operational current (IEC 60947--1) AC rating (UL 08) AC12 (resistive) 230 V 16 A 8 A 12 A A 6 A A AC1 (inductive) 230 V 1. A 1 A 1. A 1. A 1 A 1. A DC12 (resistive) 24 V 16 A 8 A 12 A A 6 A A DC13 (inductive) 24 V 2 A 2 A 8 A 8 A 6 A 2 A Utilization category (Control Circuit Rating Code) AgNi - - - B 300 max. rated operational - - - 300 V AC max. continuous thermal current at B 300 max. making / breaking apparent power at B 300 Utilization category General Purpose (single phase) Utilization category (Resistive) 16 A, 20 V AC - - - A - - - 3600/360 VA - - 8 A, 20 V AC A, 20 V AC 12 A, 10 V AC 6 A, 20 V AC A, 10 V AC 6 A, 20 V AC A, 10 V AC A, 20 V AC A, 20 V AC Minmum switching power 0.3 W (AgNi), 0.1 W (AgNi/Au) 0.3 W Maximum switching power AC-1 4000 VA 2000 VA 3000 VA 200 VA 100 VA 200 VA Contact resistance 0 m 0 m Maximum switching capacity rated load AC-1 600 switching cycles/h 1200 switching cycles/h A, 20 V AC without load 72000 switching cycles/h 18000 switching cycles/h 12000 switching cycles/h Mechanical lifetime > 3 x 7 switching cycles > 2 x 7 switching cycles Electrical lifetime AC1 (resistive) > switching cycles > switching cycles > switching cycles (16 A, 20 V) (8 A, 20 V) (12 A, 20 V) ( A, 20 V) (6 A, 20 V) ( A, 20 V) cos ϕ see reduction factor F Response time typ. 7 ms typ. 13 ms (DC), ms (AC) typ. 18 ms (DC), 12 ms (AC) Release time typ. 3 ms typ. 3 ms (DC), 8 ms (AC) typ. 7 ms (DC), ms (AC) Isolation data Rated insulation 400 V AC 20 V AC Insulation class C20 / B400 C20 / B20 C20 Rated impulse between coil and contacts kv AC 2. kv AC withstand U between open contacts imp 1 kv AC 1. kv AC Clearance Creepage distance between c/o contacts 2. kv AC 2. kv AC 2 kv AC 2 kv AC between coil and contacts between coil and contacts mm 2. mm 1.6 mm 3 mm mm 4 mm 3.2 mm 4.2 mm Over category III III II III Pollution degree 3 3 2 3 General data Dimensions (W x H x D) when mounted 12.7 x 29 x 1.7 mm 21.2 x 27. x 3.6 mm 3 x 3 x 4.4 mm Weight 14 g (0.031 lb) 3 g (0.077 lb) 83 g (0.18 lb) Mounting Mounting position on socket (see accessories) Degree of protection IP 67 IP 40 Electrical connection Connection any by socket - /1 ABB Catalog 2CDC 1 004 C0208

Technical data, Load limit curves Type CR-P...1 CR-P...2 CR-M...2 CR-M...3 CR-M...4 CR-U...2 CR-U...3 Environmental data Ambient temperature range operation DC -40... +8 C -40... +70 C operation AC -40... +70 C -40... + C storage -40... +8 C Vibration resistance -10 Hz n/o contact g g g n/c contact g g g g Shock resistance n/o contact 30 g 20 g g g Standards n/c contact 30 g 20 g g g Product standard EN 618-1, EN 602-23 IEC 60664-1 Low Voltage Directive EN 608-1, EN 602-23 IEC 618-7 73/23/EEC EN 602-1-00 Approvals see page /6. Load limit curves - Maximum switching power at resistive DC load CR-P with 1 c/o contact CR-P with 2 c/o contacts CR-U with 2 and 3 c/o contacts DC current [A] DC current [A] DC current [A] 1 = resistive load, T = 0 ms 2 = inductive load, T = 40 ms DC [V] 2CDC 292 00 F0204 DC [V] 2CDC 292 0 F0204 DC [V] 2CDC 292 028 F0204 CR-M with 2 c/o contacts CR-M with 3 c/o contacts CR-M with 4 c/o contacts DC current [A] DC current [A] 1 = resistive load, T = 0 ms 2 = inductive load, T = 40 ms DC current [A] DC [V] 2CDC 292 01 F0204 DC [V] 2CDC 292 019 F0204 DC [V] 2CDC 292 023 F0204 2CDC 1 004 C0208 Catalog ABB /16

Load limit curves Load limit curves - Electrical lifetime at resistive AC load CR-P with 1 c/o contact CR-P with 2 c/o contacts CR-U with 2 and 3 c/o contacts Switching cycles Switching cycles Switching cycles Switching power [kva] 2CDC 292 003 F0204 Switching power [kva] 2CDC 292 009 F0204 Switching power [kva] 2CDC 292 027 F0204 CR-M with 2 c/o contacts CR-M with 3 c/o contacts CR-M with 4 c/o contacts Switching cycles Switching cycles Switching cycles Switching power [kva] 2CDC 292 013 F0204 Switching power [kva] 2CDC 292 018 F0204 Switching power [kva] 2CDC 292 022 F0204 Reduction factor F at inductive AC load CR-P CR-M CR-U Reduction factor Reduction factor Reduction factor Power factor 2CDC 292 004 F0204 Power factor 2CDC 292 014 F0204 Power factor 2CDC 292 029 F0204 /17 ABB Catalog 2CDC 1 004 C0208

Connection diagrams Connection diagrams CR-P with 1 c/o contact CR-M with 2 c/o contacts CR-M with 3 c/o contacts CR-U with 2 c/o contacts 2CDC 292 008 F0004 2CDC 292 020 F0004 2CDC 292 001 F0004 2CDC 292 011 F0004 2CDC 292 016 F0004 CR-P with 2 c/o contacts CR-M with 4 c/o contacts CR-U with 3 c/o contacts Dimensional drawings Dimensions in mm and inches 2CDC 292 002 F0004 CR-P 2CDC 292 012 F0004 CR-M with 2 c/o contacts 2CDC 292 02 F0004 CR-U with 2 c/o contacts 2CDC 292 017 F0004 2CDC 292 026 F0004 CR-U with 3 c/o contacts CR-M with 3 c/o contacts 2CDC 292 021 F0004 2CDC 292 030 F0004 2CDC 292 024 F0004 2CDC 1 004 C0208 Catalog ABB /18

Connection diagrams Dimensional drawings Dimensions in mm and inches Sockets for screw connection 1,8 7, Marker 29 1,2 62 27,2 Marker 27,2 27,2 24 42,6 Relay 7,2 3,4 Holder 20 76 Relay 2CDC 292 004 F0211 Pluggable function module 2CDC 292 006 F0211 62 Holder Pluggable function module 27,2 Marker CR-M2SS - CR-M3SS - CR-M4SS 60,8 42,6 27,2 27,2 24 CR-PLS Relay 7 3,4 Holder 42. 61 62 2CDC 292 003 F0211 CR-M2LS CR-M3LS CR-M4LS 29,1 CR-M2LS - CR-M3LS - CR-M4LS Pluggable function module.08 3.2 Relay 20.32.08 78. 37,3 38,1 29.4 Holder 12 - M3 2CDC 292 033 F0004 1. 7.62 24 CR-PLSx 0 Pluggable function module 2CDC 292 008 F0011 9 - M3 7,3 29,8 29,8 CR-U2S CR-U3S CR-U2S - CR-U3S 7,3 3,4 4 Marker 42.8 Holder 2CDC 292 081 F0004 CR-U3E 20 76 Relay 38,1 27,8 38,1 27,8 26 2CDC 292 007 F0211 1,8 24 CR-PSS Pluggable function module 2CDC 292 009 F0011 61,8 CR-U2SM 8 - M3 61,8 CR-U3SM CR-U2SM 11 - M3 3,4 4 2CDC 292 002 F000 CR-U3SM /19 ABB Catalog 2CDC 1 004 C0208

Connection diagrams Dimensional drawings Dimensions in mm and inches Sockets for spring connection 7,62 24,4 43, 33,8 31 24 42, 33,2 2CDC 292 0 F0011 12,4 12,4 16,3,08,08 20,32 34,4 2,9 97, 27 26 79,, 1 9 2CDC 292 006 F000 CR-PLC CR-M2LC, CR-M4LC Jumper 9 x 27.2 (=244,8) 2CDC 292 011 F0011 6±0,2 2±0,2 27.2 ±0.2 246.8 9, R1 1 CR-PJ 9x1 (=139,) 2CDC 292 012 F0011 2±0,2 6±0,2 1, ±0,2 141,+1 R1 1, CR-MJ 2CDC 1 004 C0208 Catalog ABB /20