Alltid Always tillgänglig available - Alltid öppen! - Always open!
Electronic totalizers, LCD display - 1/32 DIN 24x mm Eaton Durant Catalogue Weight Type number kg/each Totalizer, add/subtract, NPN/PNP input LCD, 8 digits E5-024-C0400 0,08 Totalizer, add, 10-260V AC/DC input LCD, 8 digits E5-024-C0408 0,08 Totalizer, up/down, NPN ingång LCD, 8 digits E5-024-C0410 0,08 Adapter for mounting counter on 35 mm DIN rail A24DINADAPT 0,165 E5-024-C0400 E5-024-C0408 E5-024-C0410 Type LCD, 8 digits, 8 mm high, black on grey background Capacity -9999999 to 99999999 0 to 99999999-9999999 to 99999999 Counting Totalizer Add/subtract Add Up/down Counting inputs Quantity 1 1 2 Low frequency, speed/type 30 Hz, NPN 30 Hz, 10-260 V AC/DC High frequency, speed/type 12 khz, PNP 7 khz, NPN Reset, depending on connection Front reset key/external Front reset key/external Front reset key/external Power supply, terminals Power supply Non-replacable lithium battery, expected life ca 8 years Terminals Screw terminal Screw terminal Screw terminal Operating temperature -10 - +55 C -10 - +55 C -10 - +55 C Relative humidity <85%, non condensing <85%, non condensing <85%, non condensing Ingress protection, front/terminals IP 65/IP 20 IP 65/IP 20 IP 65/IP 20 Standards EN 55011 Class B, EN 61000-6-2, EN 61010 section 1 only AC model Certifi cation/approval CE, RoHS, cur, fi le #E177646 Max 19,3 22x45 24 572690.43 28 53 56 50 + 0,6 40 32 25 + 0,5 32 + 0,1 47,7 2,8 3 45 + 0,6 M3 Front bezel A, included Front bezel B, included for front bezel A & B 22,2 +0,3 101 70 45 50,4 Connections, DC input 1 Input A, counting high freq. 2 Input B, counting low freq. 3 External reset signal 4 Reset key enabled, NPN 5 Add/subtr. or Up/down 6-0 VDC, earth 7 Not used 8 Not used Connections, AC/DC input 1 Input A, counting 2 Common, input A & B 3 Input B, external reset signal 4 Reset key enabled, NPN 5 Not used 6-0 VDC, earth 7 Not used 8 Not used 83,5 75 45 25,4 Adapter for mounting on 35 mm DIN rail - A24DINADAPT 2
Electronic multifunction counters, LED display - 1/32 DIN 24x mm see note 1 Eaton Durant Catalogue Weight Type number kg/each Totalizer LED, 6 digits E5-024-E0402 0,08 Totalizer/tachometer/time meter LED, 6 digits E5-424-E0402 0,08 Totalizer/tachometer/time meter, double registers LED, 6 digits E5-524-E0402 0,08 Totalizer/tachometer, separate frequency input LED, 6 digits E5-024-E0432 0,08 Adapter for mounting counter on 35 mm DIN rail A24DINADAPT 0,165 see note 1 E5-024-E0402 E5-424-C0402 E5-524-C0402 E5-024-E0432 Type 7 segment LED, 6 digits, 8 mm high, red on black background Capacity 0 to 999999-19999 to 999999 0 to 999999-199999 to 999999 Functions Totalizer Add Up/down Add Up/down Tachometer, speed indication 1/h or 1/s 1/h or 1/s 1/h or 1/s Time meter, units s, min, h or h-min-s s, min, h or h-min-s Scale factor Multiplier/dividend Multiplier/dividend Multiplier/dividend Number of decimals 0, 1, 2 or 3 0, 1, 2 or 3 0, 1, 2 or 3 0, 1, 2 or 3 Data memory EEPROM EEPROM EEPROM EEPROM Counting inputs Quantity 1 2 2 3, separate frequency inp. Low frequency, speed/type 30 Hz, NPN/PNP 30 Hz, NPN/PNP 30 Hz, NPN/PNP 30 Hz, NPN/PNP High frequency, speed/type 60 khz, NPN/PNP 60 khz, NPN/PNP 60 khz, NPN/PNP 30 khz, NPN/PNP Reset, programmable Front reset key/external Front reset key/external Front reset key/external Front reset key/external Power supply/terminals Power supply, consumption 10-30 VDC, <50 ma 10-30 VDC, <50 ma 10-30 VDC, <50 ma 10-30 VDC, <50 ma Terminals Screw terminals Screw terminals Screw terminals Screw terminals Operating temperature -10 - +50 C -10 - +50 C -10 - +50 C -10 + 50 C Relative humidity <85%, non condensing <85%, non condensing <85%, non condensing <85%, non condensing Ingress protection, front/terminals IP 65/IP 20 IP 65/IP 20 IP 65/IP 20 IP 65/IP 20 Standards EN 55011 Class B, EN 61000-6-2, EN 61000-6-4 Certifi cate/approval CE, RoHS, cur, fi le #E177646 22x45 Max19,3 53 56 50 + 0,6 24 69871.6 28 40 32 25 + 0,5 32+ 0,1 4 59 6,5 45 + 0,6 M3 Front bezel A, included Front bezel B, included for front bezel A & B See page 2 for dimensions for A24DINADAPT 22,2 +0,3 Connections, E5-024-E402 1 +10-30 VDC 2-0 VDC, earth 3 Input, count 4 Not used 5 External reset Connections, E5-424-E402 & E5-524-E402 1 +10-30 VDC 2-0 VDC, earth 3 Input A, count/tachometer/time 4 Input B, count-function/time 5 External reset Connections, E5-024-E432 1 +10-30 VDC 2-0 VDC, earth 3 Input A, count 4 Input B, function 5 Input C, frequency Note 1 E5-524-C0402 has double registers in combinations totalizer/totalizer, totalizer/tachometer, totalizer/time, time/time. Select between chosen values by pressing the front key. 3
Electronic multifunction counters with preset, LCD display - 1/16 DIN x mm Catalogue Weight Type Power supply number kg/each Totalizer, 1 preset Battery LCD, 2x6 digits E5-1-C1400 0,18 Multifunction counter, 1 preset 90-260 VAC LCD, 2x6 digits E5-1-C1421 0,24 Multifunction counter, 1 preset 10-30 VDC LCD, 2x6 digits E5-1-C1422 0,24 Multifunction counter, 2 preset 90-260 VAC LCD, 2x6 digits E5-1-C2421 0,24 Multifunction counter, 2 preset 10-30 VDC LCD, 2x6 digits E5-1-C2422 0,24 E5-1-C1421 E5-1-C2421 E5-1-C1400 E5-1-C1422 E5-1-C2422 Type LCD, 2 lines of 6 digits, 7/4,5 mm high LCD, 2 lines of 6 digits, 9/7 mm high black on grey background black on grey background Capacity -999999 to 9999999-999999 to 9999999 Functions Number of presets 1 1 2 Totalizer Programmable add/subtract Up/down Up/down, batch Tachometer, speed indication Gate time 0,01-99,9 s Gate time 0,01-99,9 s Time meter, units s/min/h or h-min-s s/min/h or h-min-s Scale factor Multiplier Multiplier Number of decimals 0, 1, 2 or 3 0, 1, 2 or 3 Data memory Battery supplied, expected life ca 8 years EEPROM EEPROM Counting inputs Quantity 1 2 2 Low frequency, speed/type 25 Hz, 12-250 VAC/VDC 30 Hz, NPN/PNP 30 Hz, NPN/PNP High frequency, speed/type 10 khz, NPN/PNP 10 khz, NPN/PNP Reset Front reset key/external Front reset key/external Front reset key/external Keyboard interlock Yes Yes Yes Outputs Quantity 1 1 2 Type Relay 1, relay/optocoupler 2, relay/optocoupler Electrical rating 2 A at 30 VDC/0,5 A at 230 VAC Relay: 250 VAC/300 VDC 3 A Relay: 250 VAC/300 VDC 3 A Optocoupler: 30 VDC 50 ma Optocoupler: 30 VDC 50 ma Function Programmable NO or NC contact Relay: change-over contact Relay: change-over contact Optocoupler: NC contact Optocoupler: NO contact Power supply/terminals Power supply, consumption 2 exchangeable lithium batteries, 1/2AA 3,6 V 10-30 VDC, < 0,1 A 10-30 VDC, <0,1 A 90-260 VAC, 50/60 Hz, <4 VA 90-260 VAC, 50/60 Hz, <4 VA Terminals Plug-in screw terminal block Plug-in screw terminal block Plug-in screw terminal block Operating temperature -10 - +50 C 0 - +50 C 0 - +50 C Relative humidity <85%, non condensing <85%, non condensing <85%, non condensing Ingress protection front/terminals IP 65/IP 20 IP 65/IP 20 IP 65/IP 20 Standards EN 55011 Class B, EN 61000-6-2, EN 61000-6-4 EN 55011 Class B, EN 61000-6-2, EN 61000-6-4 Certifi cate/approval CE, RoHS, cur, fi le #E177646 CE, RoHS, cur, fi le #E177646 4
Electronic multifunction counters with preset, LCD display - 1/16 DIN x mm Type E5-1-C1400 Max 10,5 45 + 0,6 SQ 45 6.732 850.000 45 +0,6 16 63,2 3 Without front bezel 60 Max 9,5 55 50 + 0,6 SQ 45 55 6.732 850.000 75 6.732 850.000 63 50 +0,6 63 With front bezel A, included 16 62,2 4 Flush screw BF4, DIN 74 With front bezel B, included M4, front bezel A & B Type E5-1-C1421, E5-1-C1422, E5-1-C2421 and E5-1-C2422 Max 10,5 45 + 0,6 SQ 45-903.682-903.250 PR1 45 +0,6 15,5 86,5 3 Without front bezel 60 Max 9,5 55 50 + 0,6 SQ 45 55-903.682-903.250 PR1 75-903.682-903.250 PR1 63 50 +0,6 63 15,5 85,5 4 With front bezel A, included Flush screw BF4, DIN 74 With front bezel B, included M4, front bezel A & B Connections type E5-1-C1400 Connections type E5-1-C1421, E5-1-C1422, E5-1-C2421 and E5-1-C2422 Rear view 1 Keyboard interlocked, closed 2 3 Programmable 4 relay output, NO/NC 5 Input counting 6 External reset signal 7 Common, counting/reset X2 X1 Rear view Terminal block X1 1 Output, optocoupler 2 only units with 2 presets 3 4 Relay output, change-over 5 6 Power supply 90-230 VAC/-0 VDC 7 Power supply 90-230 VAC/+10-30 VDC Terminal block X2 1 Sensor supply, +24 VDC, only AC models 2 Sensor supply, -0 VDC, only AC models 3 Input A, counting/tachometer/time 4 Input B, Counting-function/tachometer/time 5 External reset signal 6 Gate, no counting when activated 7 Keyboard interlocked, closed 5
Eclipse multifunction counters with preset, tachometers, LED display - 1/8 DIN x96 mm Catalogue number Power supply Weight Type 10-30 VDC 85-265 VAC kg/each Counter and tachometer LED, 6 digits 57700-0 57701-0 0,43 Counter and tachometer, relay output LED, 6 digits 57700-1 57701-1 0,43 Counter and tachometer, analogue output LED, 6 digits 57700-2 57701-2 0,43 Counter and tachometer, relay and analogue output LED, 6 digits 57700-3 57701-3 0,43 Counter and tachometer, RS5 output LED, 6 digits 57700-4 57701-4 0,43 Counter and tachometer, relay and RS5 output LED, 6 digits 57700-5 57701-5 0,43 Counter and tachometer, analogue and RS5 output LED, 6 digits 57700-6 57701-6 0,43 Counter and tachometer, relay, analogue and RS5 output LED, 6 digits 57700-7 57701-7 0,43 Tachometer LED, 5 digits 57700-470 57701-470 0,43 Tachometer, relay output LED, 5 digits 57700-471 57701-471 0,43 Tachometer, analogue output LED, 5 digits 57700-472 57701-472 0,43 Tachometer, relay and analogue output LED, 5 digits 57700-473 57701-473 0,43 Tachometer, RS5 output LED, 5 digits 57700-474 57701-474 0,43 Tachometer, relay and RS5 output LED, 5 digits 57700-475 57701-475 0,43 Tachometer, analogue and RS5 output LED, 5 digits 57700-476 57701-476 0,43 Tachometer, relay, analogue and RS5 output LED, 5 digits 57700-477 57701-477 0,43 Multifunction counter and tachometer Tachometer Type 7 segment LED, 6 digits, 14 mm high 7 segment LED, 5 digits, 14 mm high red on black background red on black background Capacity -99999 to 999999 0 to 99999 Functions Main functions Totalizer, up/down, batch, presets Tachometer with alarm levels tachometer Number of counting register 3 1 Number of presets 2 for main counter, 1 for batch counting 2, high/low alarm Scale factor Multiplier Multiplier Number of decimals 0, 1, 2, 3 or 4 0, 1, 2, 3 or 4 Data memory EEPROM EEPROM Counting inputs Quantity 2 1 Low frequency, speed/type 200 Hz, NPN/PNP 200 Hz NPN/PNP High frequency, speed/type 8,2 khz, NPN/PNP 10 khz, NPN/PNP Reset, programmable Front reset key/external Outputs, factory installed options Relay Quantity 2 2 Contact type Change-over contact, 250 VAC/30 VDC, 5 A Change-over contact, 250 VAC/30 VDC, 5 A Analogue Quantity 1 1 Signal 4-20 ma or 0-10 VDC 4-20 ma or 0-10 VDC RS5 Quantity 1 1 Speed 1200-19200 Baud, none/even/odd parity 1200-19200 Baud, none/even/odd parity Address 0-99, Opto 22 protocol 0-99, Opto 22 protocol 6
Eclipse multifunction counters with preset, tachometers, LED display - 1/8 DIN x96 mm Multifunction counter and tachometer Tachometer Power supply/terminals Power supply, consumption 10-30 VDC, 12 W 10-30 VDC, 12 W 85-265 VAC 47-63 Hz, 20 VA 85-265 VAC 47-63 Hz, 20 VA Terminals Plug-in screw terminal block Plug-in screw terminal block Operating temperature 0 - +50 C 0 - +50 C Relative humidity <85%, non condensing <85%, non condensing Ingress protection, front/terminals IP 65 - NEMA 4X/IP 20 IP 65 - NEMA 4X/IP 20 Standards EN 50081-2, EN 50082-2 EN 50081-2, EN 50082-2 Certifi cate/approval CE, RoHS, cul, fi le #E200563 CE, RoHS, cul, fi le #E200563 Eclipse process instruments, LED display - 1/8 DIN see note 2 Catalogue number Power supply Weight Type 10-30 VDC 85-265 VAC kg/each DC voltage metering LED, 4 digits 57700-400 57701-400 0,43 DC voltage metering, relay output LED, 4 digits 57700-401 57701-401 0,43 DC voltage metering, analogue output LED, 4 digits 57700-402 57701-402 0,43 DC voltage metering, relay and analogue output LED, 4 digits 57700-403 57701-403 0,43 DC voltage metering, RS5 output LED, 4 digits 57700-404 57701-404 0,43 DC voltage metering, relay and RS5 output LED, 4 digits 57700-405 57701-405 0,43 DC voltage metering, analogue and RS5 output LED, 4 digits 57700-406 57701-406 0,43 DC voltage metering, relay, analogue and RS5 output LED, 4 digits 57700-407 57701-407 0,43 AC voltage metering, relay output LED, 4 digits 57700-411 57701-411 0,43 AC voltage metering, relay and analogue output LED, 4 digits 57700-413 57701-413 0,43 AC voltage metering, relay and RS5 output LED, 4 digits 57700-415 57701-415 0,43 AC voltage metering, analogue and RS5 output LED, 4 digits 57700-416 57701-416 0,43 AC voltage metering, relay, analogue and RS5 output LED, 4 digits 57700-417 57701-417 0,43 DC current metering LED, 4 digits 57700-420 57701-420 0,43 DC current metering, relay output LED, 4 digits 57700-421 57701-421 0,43 DC current metering, analogue output LED, 4 digits 57700-422 57701-422 0,43 DC current metering, relay and analogue output LED, 4 digits 57700-423 57701-423 0,43 DC current metering, RS5 output LED, 4 digits 57700-424 57701-424 0,43 DC current metering, relay and RS5 output LED, 4 digits 57700-425 57701-425 0,43 DC current metering, analogue and RS5 output LED, 4 digits 57700-426 57701-426 0,43 DC current metering, relay, analogue and RS5 output LED, 4 digits 57700-427 57701-427 0,43 AC current metering, relay output LED, 4 digits 57700-431 57701-431 0,43 AC current metering, relay and analogue output LED, 4 digits 57700-433 57701-433 0,43 AC current metering, relay and RS5 output LED, 4 digits 57700-435 57701-435 0,43 AC current metering, analogue and RS5 output LED, 4 digits 57700-436 57701-436 0,43 AC current metering, relay, analogue and RS5 output LED, 4 digits 57700-437 57701-437 0,43 Note 2 Eclipse process instruments are also available in versions for fl ow control either with pulse or analogue input. Contact CHS Controls for more information. 7
Eclipse process instruments, LED display - 1/8 DIN see note 2 Catalogue number Power supply Weight Type 10-30 VDC 85-265 VAC kg/each 5 A AC current metering LED, 4 digits 57700-440 57701-440 0,43 5 A AC current metering, relay output LED, 4 digits 57700-441 57701-441 0,43 5 A AC current metering, analogue output LED, 4 digits 57700-442 57701-442 0,43 5 A AC current metering, relay and analogue output LED, 4 digits 57700-443 57701-443 0,43 5 A AC current metering, RS5 output LED, 4 digits 57700-444 57701-444 0,43 5 A AC current metering, relay and RS5 output LED, 4 digits 57700-445 57701-445 0,43 5 A AC current metering, analogue and RS5 output LED, 4 digits 57700-446 57701-446 0,43 5 A AC current metering, relay, analogue and RS5 output LED, 4 digits 57700-447 57701-447 0,43 Analogue signals LED, 4 digits 57700-450 57701-450 0,43 Analogue signals, relay output LED, 4 digits 57700-451 57701-451 0,43 Analogue signals, analogue output LED, 4 digits 57700-452 57701-452 0,43 Analogue signals, relay, and analogue output LED, 4 digits 57700-453 57701-453 0,43 Analogue signals, RS5 output LED, 4 digits 57700-454 57701-454 0,43 Analogue signals, relay and RS5 output LED, 4 digits 57700-455 57701-455 0,43 Analogue signals, analogue and RS5 output LED, 4 digits 57700-456 57701-456 0,43 Analogue signals, relay, analogue, and RS5 output LED, 4 digits 57700-457 57701-457 0,43 J/K/T termocoupler, PT100 RTD LED, 4 digits 57700-460 57701-460 0,43 J/K/T termocoupler, PT100 RTD, relay output LED, 4 digits 57700-461 57701-461 0,43 J/K/T termocoupler, PT100 RTD, analogue output LED, 4 digits 57700-462 57701-462 0,43 J/K/T termocoupler, PT100 RTD, relay and analogue output LED, 4 digits 57700-463 57701-463 0,43 J/K/T termocoupler, PT100 RTD, RS5 output LED, 4 digits 57700-464 57701-464 0,43 J/K/T termocoupler, PT100 RTD, relay and RS5 output LED, 4 digits 57700-465 57701-465 0,43 J/K/T termocoupler, PT100 RTD, analogue and RS5 out. LED, 4 digits 57700-466 57701-466 0,43 J/K/T termocoupler, PT100 RTD, relay, anal. and RS5 out. LED, 4 digits 57700-467 57701-467 0,43 Process signals Temperature thermocouplers Type 7 segment LED, 4 digits, 14 mm high 7 segment LED, 4 digits, 14 mm high red on black background red on black background Capacity -99999 to 999999 See type of thermocoupler, values in C or F Functions Main functions Process values with alarm levels Temperature with alarm levels Number of presets 2, high/low alarm 2, high/low alarm Scale factor Multiplier None Number of decimals 0, 1, 2, 3 or 4 0 Data memory EEPROM EEPROM Input signals Quantity 1 Process values Analogue signal 4-20 ma/0-5 V/0-10V Voltage, DC ±199,9 mv to ±199,9 V Voltage, AC 199,9 mv to 199,9 V, 40-1000 Hz, RMS Current, DC ±199,9 μa to ±199,9 ma Current, AC Current, 5 A AC 199,9 μa to 199,9 ma, 40-1000 Hz, RMS 5 A AC, 40-1000 Hz, RMS Note 2 Eclipse process instruments are also available in versions for fl ow control either with pulse or analogue input. Contact CHS Controls for more information. 8
Eclipse process instruments, LED display - 1/8 DIN see note 2 Process signals Temperature thermocouplers Input signals Quantity 1 Temperature J thermocoupler 2 wire, range -200 - +760 C K thermocoupler 2 wire, range -200 - +1370 C T thermocoupler 2 wire, range -200 - +400 C PT100 RTD 4 wire, range -200 - +850 C Outputs, factory installed options Relay Quantity 2 2 Contact type Change-over contact, 250 VAC/30 VDC, 5 A Change-over contact, 250 VAC/30 VDC, 5 A Analogue Quantity 1 1 Signal 4-20 ma or 0-10 VDC 4-20 ma or 0-10 VDC RS5 Quantity 1 1 Speed 1200-19200 Baud, none/even/odd parity 1200-19200 Baud, none/even/odd parity Address 0-99, Opto 22 protocol 0-99, Opto 22 protocol Power supply/terminals Power supply, consumption 10-30 VDC, 12 W 10-30 VDC, 12 W 85-265 VAC 47-63 Hz, 20 VA 85-265 VAC 47-63 Hz, 20 VA Terminals Plug-in screw terminal block Plug-in screw terminal block Operating temperature 0 - +50 C 0 - +50 C Relative humidity <85%, non condensing <85%, non condensing Ingress protection, front/terminals IP 65 - NEMA 4X/IP 20 IP 65 - NEMA 4X/IP 20 Standards EN 50081-2, EN 50082-2 EN 50081-2, EN 50082-2 Certifi cate/approval CE, RoHS, cul, fi le #E200563 CE, RoHS, cul, fi le #E200563 Max 4,8 Durant 55,6 45 ±0,6 PGM 8,1 84,1 6,9 102,6 92 ±0,8 Connections multifunction counters/tachometers, tachometers and process instruments X2 - Input signal counter/tachometer X2 - Input process instrument, analogue X3 - Relay output X4 - RS5 utput X4 X5 4 +12 VDC sensor power supply 4 +24 VDC supply 6 3 +RS5 3 Input A, programmable function 3 + 4-20 ma 5 Relay 2, co 2 -RS5 X3 2 Input B, programmable function 2 + 0-10 V 4 1 Common 1 Common, earth 1 - Common 3 2 Relay 1, co X1 X6 X2 X2 - Input signal tachometer X2 - Input process instr. voltage/current 1 X5 - Analogue output 4 +12 VDC sensor power supply 2 L1 AC/+ DC 3 + 4-20 ma 3 Input A, tachometer 1 L1 AC/- DC 2 + 0-10 V Rear view 2 Programming enable 1 - Common 1 Common, earth X1 - Power supply X2 - Input signal process instrument, temperature X6 - Input control, counter only 2 L1, 85-265 VAC/+10-30 VDC 4 + 4 wire PT100 RTD 4 Input 1 3 L2, 85-265 VAC/-10-30 VDC 3 + 4 wire PT100 RTD/2 wire J, K and T thermocoupler 3 Input 2 3 Not used 2-4 wire PT100 RTD/2 wire J, K and T thermocoupler 2 Input 3 1-4 wire PT100 RTD 1 Common, earth 9
Electronic multifunction counters, LED display - 1/8 DIN x96 mm Eaton Durant Catalogue Weight Type number kg/each Totalizer/tachometer/time meter, 90-260 VAC LED, 6 digits E5-496-E0401 0,15 Totalizer/tachometer/time meter, 10-30 VDC LED, 6 digits E5-496-E0402 0,15 Type 7 segment LED, 6 digits, 14 mm high red on black background Capacity -199999 to 999999 Functions Totalizer Up/down Tachometer, speed indication 1/h or 1/s Time meter, units s, min, h or h-min-s Scale factor Multiplier/dividend Number of decimals 0, 1, 2 or 3 Data memory EEPROM Counting inputs Quantity 2 Low frequency, speed/type 30 Hz, NPN/PNP High frequency, speed/type 60 khz, NPN/PNP Reset, programmable Front reset key/external Power supply, terminals Power supply, consumption Terminals 90-260 VAC 50/60 Hz, <6 VA or 10-30 VDC, <50 ma Screw terminals Operating temperature -20 - +65 C Relative humidity <85%, non condensing Ingress protection front/terminals IP 65/IP 20 Standards EN 55011 Class B, EN 61000-6-2, EN 61000-6-4 Certifi cate/approval CE, RoHS, cur, fi le #E177646 Max 19 96 44,9 x 91,9 5 6 8 7 5 3 X1 X2 Rear view 15,5 67,1 6,5 4 45 +0,6 Terminal block X1 Terminal block X2 1 Not used 1 Supply 90-260 VAC/-0 VDC 2 Not used 2 Supply 90-260 VAC/+10-30 VDC 3 External reset signal 4 Input B, count - function/time 5 Input A, count/tachometer/time 6 Sensor power supply, -0 VDC, only AC model 7 Sensor power supply, +24 VDC, only AC model 10 92 +0,8
Elektronic process instruments, LED display - 1/32 DIN 24x mm Eaton Durant Catalogue Weight Type number kg/each Process instrument, 10-30 VDC LED, 5 digits E5-324-E0402 0,05 Adapter for mounting counter on 35 mm DIN rail A24DINADAPT 0,165 Type 7 segment LED, 5 digits 8 mm high red on black background Capacity -199999 to 999999 Functions Main function ing process values Switching between displayed value, max/min/actual Front key Scaling Programmable value for min/max signal Number of decimals 0, 1, 2, 3 or 4 Data memory EEPROM Inputs Quantity Signal Latching of displayed value Power supply, terminals Power supply, consumption Terminals 1, analogue, 14-bit resolution 0-20 ma, 4-20 ma, 0-10 V or 2-10 V External signal, PNP 10-30 VDC, <50 ma Screw terminals Operating temperature -10 - +50 C Relative humidity <85%, non condensing Ingress protection front/terminals IP 65/IP 20 Standards EN 55011 Class B, EN 61000-6-2, EN 61000-6-4 Certifi cate/approval CE, RoHS, cur, fi le #E177646 22x45 Max19,3 53 56 50 + 0,6 24 67863 Pa 28 40 32 25 + 0,5 32+ 0,1 59 6,5 4 45 + 0,6 M3 Front bezel A, included Front bezel B, included for front bezel A & B 22,2 +0,3 101 70 45 50,4 Connections 1 +10-30 VDC 2-0 VDC, earth 3-0 VDC, earth 4 Latch displayed value 5 +0(4)-20 ma 6 Earth, analogue signal 7 +0(2)-10 V 83,5 75 45 25,4 Adapter for mounting on 35 mm DIN rail - A24DINADAPT 11
Electronic hour meters, LCD display - 1/32 DIN 24x mm Eaton Durant Catalogue Weight Type number kg/each 1/32 DIN format, hours/minutes, NPN input LCD, 8 digits E5-224-C0440 0,08 1/32 DIN format, hours/minutes, 10-260 V input LCD, 8 digits E5-224-C04 0,08 1/32 DIN format, hours/minutes/seconds, NPN input LCD, 8 digits E5-224-C0450 0,08 1/32 DIN format, hours/minutes/seconds, 10-260 V input LCD, 8 digits E5-224-C0458 0,08 Adapter for mounting hour meter on 35 mm DIN rail A24DINADAPT 0,165 E5-224-C0440 E5-224-C04 E5-224-C0450 E5-224-C0458 Type LCD, 8 digits, 8 mm high, black on grey background Capacity 0-99999999 Time range Time range, depending on connection 999999 h 59 min 99999 h 59 min 59 s 999999,99 h 999999,99 s Input Quantity 1 1 Type NPN 20-260 VAC/VDC Reset, interlockable Front reset key/external Front reset key/external Power supply, terminals Power supply Non-replacable lithium battery, expected life ca 8 years Terminals Screw terminal Screw terminal Operating temperature -10 - +55 C -10 - +55 C Relative humidity <85%, non condensing <85%, non condensing Ingress protection, front/terminals IP 65/IP 20 IP 65/IP 20 Standards EN 55011 Class B, EN 61010 section 1 Certifi cate/approval CE, RoHS, cur, fi le #E177646 Max 19,3 22x45 24 572690.43 28 53 56 50 + 0,6 40 32 25 + 0,5 32 + 0,1 47,7 2,8 3 45 + 0,6 M3 Front bezel A, included Front bezel B, included for front bezel A & B 22,2 +0,3 101 70 45 50,4 Connections, DC models Connections, AC/DC models 1 Not used 1 Input, time AC/DC 2 Input time, NPN 2 Common for terminal 1 and 3 3 External reset signal NPN 3 External reset signal AC/DC 4 Reset key enable, NPN 4 Reset key enable, NPN 5 Time range, NPN 5 Time range, NPN 6-0 VDC, earth 6-0 VDC, earth 7 Not used 7 Not used 8 Not used 8 Not used 83,5 75 45 25,4 Terminal 5 closed gives timing range 99999,99 h/9999999,9 s Adapter for mounting on 35 mm DIN rail - A24DINADAPT 12
Electronic hour meters, LCD display - round Catalogue Weight Type number kg/each Round, -150 VDC/100-230 VAC LCD, 6 digits E42DIR230 0,055 Round, -150 VDC/100-230 VAC, with reset LCD, 6 digits E42DIR230R 0,055 Round, 12- VDC/20-60 VAC LCD, 6 digits E42DIR1260 0,055 Type LCD, 6 digits, 5 mm high, black on grey background Capacity 0 to 999999 Timing range ed 99999,9 h Input Quantity 1 Type 20-250 V Reset External, E42DIR230R only Data memory EEPROM with capacity for ca 25 years Power supply, terminals Power supply, consumption Terminals Operating temperature Relative humidity Ingress protection, front/terminals Certifi cate/approval -150 VDC/100-230 VAC -440 Hz, < 2 ma 12- VDC/20-60 VAC -440 Hz, 2 < 2,5 ma Quick connectors -40 - +85 C <85%, non condensing IP65/IP00 CE, RoHS, cur, fi le E178525 Max 7,6 HOURS QUARTZ Durant 1 10 Ø 51,5-52,3 Connections 1 Power supply AC/+ DC 2 Power supply AC/- DC 3 Input, time 4 External reset E42DIR230R only Max 8,9 58,4 Max 28,6 13,2 13
Electromechanical hour meters - 1/16 DIN x mm Catalougue numbers Eaton Durant Catalogue Weight Type number kg/each Hour meter without reset, 10-30 VDC input 8 digits 8-T-65-PM-402 0,0 Hour meter without reset, 100-130 VAC input 7 digits 7-T-65-PM-406 0,0 Adapter for mounting hour meter on 35 mm DIN rail TDINADAPT 0,02 8-T-65-PM-402 7-T-65-PM-406 Type 8 digits, 4 mm high 7 digits, 4 mm high white/red on black backg. white/red on black background Time range ed 999999,99 h 99999,99 h Input Quantity 1 1 Power supply, consumption 10-30 VDC, 0,5 W 100-130 VAC 50/60 Hz, 0,75W Reset No No Terminals Type Screw terminals Screw terminals Operating temperature -15 - +50 C -15 - +50 C Ingress protection, front/terminals IP 65/IP 20 IP 65/IP 20 Approval Certifi cate/approval CE, RoHS, cur, fi le #E177646,5 61,5 Max 9 28 7 45 +0,6 41,1 19 Adapter for mounting on 35 mm DIN rail, TDINADAPT Connections 1 Input, time 2 Input time 14
General information Counters Counting or pulse counting is one of the most common functions in automation systems. Pulse counting can be done with dedicated components - counters - or as a built-in function in a control system. Counters are availabe in many confi gurations depending on working principle - mechanical, electromecahnical or electronic - and area of use, for example totalizers, preset counters or as tachometers. Totalizers Simple counter without output signal. Can be used to locally display a value. Some totalizers have built-in scale function for example to be able to convert a number of pulses to a certain length. Preset counters A counter with one or more outputs, activated when the counter reach the preset/presets value/values. Tachometers Counter that displays the speed. The number of pulses per a predetermined unit of time is displayed, for example number of pulses per second, ie the speed. Counters with time meter A time meter measure the time, for example hours, minutes or seconds, when the counter input is activated. Counters with time meter normally have an output, activated when the preset value is reached. Multifunction counters A counter with more than one function, for example totalizing, speed indication and time metering in the same unit. Multifunction counters are also available as preset counters. Hour meters Hour meters are used to record operating time for machines, the time is measured when the input is activated. Hour meters can also be equipped with front reset key or external reset signal. Process instruments Process instruments are used to display process information like pressure, temperature or similar. The input signal is normally an analogue current/ voltage signal or a signal from a thermocoupler. More advanced process instruments have features like programmable alarm limits. Process instruments can also be equipped with output signals. Inputs Most common input signal is 24 VDC transistor input, either NPN (negative polarity) or PNP (positive polarity). Optocouplers are used as input for AC and higher voltages. Most counters have inputs for both low frequency and high frequency counting. Inductive sensors, capacitive sensors, limit switches, photoelectric sensors, pushbuttons or similar components are usually connected to the low frequency input. Rotating encoders are connected to high frequency inputs. Incremental encoders can be equipped with one or more channels. Encoders with one channel are used for length measure or speed control, where direction sensing is not required. Applications where the direction of rotation should be sensed requre an encoder with two channels, A and B, where B being shifted 90 out of phase. Counting based on two channel encoders is often referred to as quadrature counting. Process instruments normally have either analogue input or input for thermocoupler. Outputs The counters can also be equipped with output signals. The most common output signal is a relay output that changes contact position for example when a preset is reached. More advanced counters can also be equipped with analogue output and serial output, RS5. Input modes The counter must be adapted to the input signals from the system. Simple totalizers have only one counting input when more advanced multifunction counters normally have two or more inputs. In addition to that the counter must have the right type of input - NPN/PNP/AC - it must also be able to correctly interpret the signal. Common input signals/counting modes are shown in fi gure 1. Less qualifi ed counters have only one counting register, ie the counting input/inputs effects the same counting register. More advanced counters like Eclipse are equipped with more counting registers. One function that requires more than one counting register is batch counting. Batch counting means that a separate counting register - batch counter - counts the number of cycles in an other counting register - main counter. Add/subtract, signal on channel B controls count direction Input A, counting Quadrature counting, phase shifted pulses, recognition of direction Input A, counting Input B, direction Result 0 1 2 1 0 Input B, direction Result 0 1 2 1 0 Up/down counting, pulse counting on both input A and B Input A, counting up Quadrature counting, pulse doubling, phase shifted pulses, recognition of direction Input A, counting Input B, counting down Result 0 1 2 1 0 0 Input B, direction Result 0 1 2 3 4 3 2 1 0 Up/up counting, pulse counting on both input A and B Input A, counting up Quadrature counting, pulse quadrupling, phase shifted pulses, recognition of direction Input A, counting Input B, counting up Result 0 1 2 3 4 6 Input B, counting and direction Result 0 1 2 3 4 5 6 7 6 5 4 3 2 1 0 Figure 1, Pulse counting examples. 15
Courier Series counters, 75x40 mm LCD display, 8 digits, 11 mm high Totalizer Tachometer Flow control CE and RoHS certifi ed Ambassador Series counters, 75x75 mm President Series counters, 147x55/147x77 mm Fusion machine control, 157x87 mm LCD display, 2x8 digits, 7,6 mm high Totalizer Preset counter, 1, 2 or 4 presets, batch counting Tachometer 2 change-over output contacts RS5 serial output CE and RoHS certifi ed, UL and CSA approved LED display 5-8 digits, 14 mm high Totalizer Preset counter, 1, 2 or 3 presets, batch counting Tachometer Relay or transistor outputs CE and RoHS certifi ed, UL and CSA approved Advanced programmable counting system with 5 count inputs, 10 digital inputs, 4 analogue inputs, 5 relay outputs, 2 transistor outputs and 2 analogue outputs. RS232/RS5 communication. Distinct graphic LCD display, 128x64 pixels. Programmed from the front panel or with a Windows based configuration software. CHS Controls AB Florettgatan 33 SE- 254 67 Helsingborg, Sweden Phone +46 42 386100, fax +46 42 386129 SMS 155 768 086112 chs@chscontrols.se Alltid Always tillgänglig available - Alltid öppen! - Always open! Catalogue PM6062E, February 2008