Industrial Access Point and Client - High Performance Entry-Level Access Point The is an IEEE 802.11n Access Point, that provides even for very demanding applications sufficient performance at a maximum data transfer rate of 300 Mbps and a Gigabit Ethernet port. The supports in the 2.4 GHz and 5 GHz range. The use of frequencies in the 5 GHz band is ideal for applications in industrial environments, as this area has 19 non-overlapping channels. The 2.4 GHz band has 3 nonoverlapping channels and is therefore for disorders such as Crosstalk vulnerable. The rugged metal housing is very compact and perfect for the installation in the control cabinet, thanks to the DIN rail mount. Along with the wide operating temperature range, the is therefore ideally suited for the industrial use. In addition to Access Point mode, the can also operate as a client or WDS Bridge. This allows you, for example, to replace an Ethernet cable, or significantly increase a radio cell. 1
Industrial Access Point and Client - Technical Details General Data Type Access-Point and Client Wifi standard (highest) IEEE 802.11n Frequency ranges 2.4 GHz, 5 GHz Amount Wifi modules 1 Amount antennas 2 Antenna connector Reverse Polarity SMA (f) Antenna diversity Copper ports 1 Resetbutton Watchdog Hardware characteristics module Atheros AR9382 Tx / Rx 2T2R MIMO (2 x 2 with MCS 0-15) IEEE 802.11a 54 Mbps IEEE 802.11b 11 Mbps IEEE 802.11g 54 Mbps IEEE 802.11n 300 Mbps IEEE 802.11i WPA / WPA2 / TKIP / PSK / AES / CCMP WEP 64-bit / 128-bit encryption Frequency range 2412 2472, 5180 5230, 5755 5795 MHz Access Point mode Client mode WDS Bridge Ethernet Connector TX RJ45 10/100/1000BaseTX 1 Ports IEEE 802.3 10BaseT / CSMA/CD (Ethernet) IEEE 802.3a 10Base2 IEEE 802.3i 10BaseT IEEE 802.3u 100BaseTX/T4/FX / Fast Ethernet IEEE 802.3ab 1000BaseT(X) / Gigabit Ethernet via UTP Speed 10/100/1000 Mbps Power supply Power supply V DC 9 48 V DC Power supply connector Terminal blocks 3-pin (m) Reverse polarity protection Power consumption typical 5.85 W Input current (9V DC) 0.65 A 2
Industrial Access Point and Client - Technical Details Protocols Configuration Network security Alerts Event Housing material Ingress protection Dimensions (W x H x D) Weight Installation Software characteristics ICMP / TCP / UDP / DHCP Server/Client / DNS / SNMP / NTP / SMTP / HTTP / IPv4 / 802.1x / RADIUS / STP/RSTP Webbrowser, Telnet, SSH, Windows Software Client Isolation, Firewall / Filtering, Turn off Radio Physical characteristics Environmental E-Mail / SNMP Trap Metal IP50 47 x 110 x 90 mm 500 g DIN rail or wall mount Operating temperature range -10 +60 C Storage temperature range -40 +85 C Humidity 5 95 % RH (non condensing) Shock EN 60068-2-27 Free fall IEC 60068-2-32 Vibration EN 60068-2-6 CE Approvals 1999/5/EC Safety EN 60950 EMC EN 301489-1/17 (Class A) Radio EN 301893, EN 300328 EN61000-4-2 ESD Contact Discharge: ± 8 KV - Level 4 Air Discharge: ± 15 KV - Level 4 EN61000-4-3, RS Radiated (Enclosure): 10 (V/m) - Level 3 EN61000-4-4, EFT EN61000-4-5 Surge AC Power Port: ± 2.0 KV - Level 3 Port: ± 2.0 KV - Level 4 AC Power Port: Line-to-Line ± 1.0 KV - Level 3 AC Power Port: Line-to-Earth ± 2.0 KV - Level 3 Port: Line-to-Earth ± 2.0 KV - Level 3 EN61000-4-6 CS Conducted (Enclosure): 10 V rms - Level 3 EN61000-4-8 PFMF (Enclosure): 10 (A/m) - Level 3 ERM EN 300 328 BRAN EN 301 893 EMF EN 50385 EMS EN 55022, EN 55024 RoHS WEEE Hazardous areas IEC 62368-1 3
Industrial Access Point and Client - Technical Details Europa (ETSI) 2.4 GHz 5 GHz 2412 2472 (20 MHz) / 2422 2462 (40 MHz) Frequency 5180 5240 (20 MHz) / 5190 5230 (40 MHz) Data Rate 802.11a 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 Mbps 802.11b 1 / 2 / 5,5 / 11 Mbps 802.11g 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 Mbps 802.11n 20 MHz bandwidth 802.11n 40 MHz bandwidth 802.11a 1 Nss: 65 Mbps @ 800 GI / 72.2 Mbps @ 400 GI (Max.) 2 Nss: 130 Mbps @ 800 GI / 144.4 Mbps @ 400 GI (Max.) 1 Nss: 135 Mbps @ 800 GI / 150 Mbps @ 400 GI (Max.) 2 Nss: 270 Mbps @ 800 GI / 300 Mbps @ 400 GI (Max.) Output Power +15 dbm @ 6 / 9 / 12 / 18 / 24 Mbps +15 dbm @ 36 Mbps +14 dbm @ 48 Mbps +12 dbm @ 54 Mbps 802.11b +14 dbm +17 dbm @ 6, 9, 12, 18, 24 Mbps +17 dbm @ 36 Mbps 802.11g +16 dbm @ 48 Mbps +16 dbm @ 54 Mbps 802.11n 2.4GHz/ HT20 802.11n 2.4GHz/ HT40 802.11n 5GHz/HT20 802.11n 5GHz/HT40 +16 dbm @ MCS 0/8 +16 dbm @ MCS 4/12 +16 dbm @ MCS 1/9 +16 dbm @ MCS 5/13 +16 dbm @ MCS 2/10 +16 dbm @ MCS 6/14 +16 dbm @ MCS 3/11 +15 dbm @ MCS 7/15 +15 dbm @ MCS 0/8 +15 dbm @ MCS 4/12 +15 dbm @ MCS 1/9 +15 dbm @ MCS 5/13 +15 dbm @ MCS 2/10 +15 dbm @ MCS 6/14 +15 dbm @ MCS 3/11 +14 dbm @ MCS 7/15 +15 dbm @ MCS 0/8 +15 dbm @ MCS 4/12 +15 dbm @ MCS 1/9 +11-14 dbm @ MCS 5/13 +15 dbm @ MCS 2/10 +9-12 dbm @ MCS 6/14 +15 dbm @ MCS 3/11 +7-10 dbm @ MCS 7/15 +14 dbm @ MCS 0/8 +14 dbm @ MCS 1/9 +14 dbm @ MCS 2/10 +14 dbm @ MCS 3/11 +14 dbm @ MCS 4/12 +10-13 dbm @ MCS 5/13 +8-11 dbm @ MCS 6/14 +6-9 dbm @ MCS 7/15 4
Industrial Access Point and Client - Technical Details Data Rate IEEE Spec (1Rx dbm) Typ./Max. (2 Rx dbm) Data Rate IEEE Spec (1Rx dbm) Typ./Max. (2 Rx dbm) Receiver Sensitivity Receiver Sensitivity 6M -82-95/-85 MCS0-82 -94/-85 9M -81-94/-84 MCS1-79 -92/-82 12M -79-93/+82 MCS2-77 -90/-80 802.11a 18M -77-90/-80 24M -74-88/-77 802.11a/n HT20 MCS3-74 -87/-77 MCS4-70 -84/-73 36M -70-84/-73 MCS5-66 -79/-69 48M -66-82/-69 MCS6-65 -78/-68 54M -65-81/-68 MCS7-64 -76/-67 1M not specified -98/-85 MCS0-79 -92/-82 802.11b 5.5M not specified -98/-85 MCS1-76 -90/-79 11M not specified -94/-85 MCS2-74 -87/-77 6M -82-96/-85 9M -81-96/-84 802.11a/n HT40 MCS3-71 -84/-74 MCS4-67 -80/-70 12M -79-95/-82 MCS5-63 -76/-66 802.11g 18M -77-93/-80 24M -74-90/-77 MCS6-62 -74/-65 MCS7-61 -72/-64 36M -70-87/-73 MCS0-82 -95/-85 48M -66-83/-69 MCS1-79 -94/-82 54M -65-82/-68 MCS2-77 -92/-80 802.11b/g/n HT20 MCS3-74 -89/-77 MCS4-70 -86/-73 MCS5-66 -82/-69 MCS6-65 -80/-68 MCS7-64 -78/-67 MCS0-79 -92/-82 MCS1-76 -92/-79 MCS2-74 -89/-77 802.11b/g/n HT40 MCS3-71 -86/-74 MCS4-67 -83/-70 MCS5-63 -77/-66 MCS6-62 -76/-65 MCS7-61 -75/-64 5
Industrial Access Point and Client - Applications Basic Access Point Setup Coverage Range Extender Setup Laptop WDS Hybrid Control Room Regular Access Point IP Camera WDS Root WDS Hybrid Basic WDS Setup Laptop Laptop PC Control Room Switch WDS Root WDS Hybrid IP Camera Smart Phone Tablet PC Access Point Setup PC Control Room Access Point Switch Access Point Client IP Camera 6
Industrial Access Point and Client - Factory settings General settings Operation mode Regular AP SSID Security Settings Disabled system settings Username adm Password 123456 network settings IP Address 192.168.2.2 Subnet Mask 255.255.255.0 Default Gateway 192.168.2.1 Preferred DNS 192.168.2.1 Dimensions ANT1 Regular AP WDS Bridge AP Client 5 Ghz W Locate RUN Reset ANT2 Front Left Right Rear Bottom Top 7
Industrial Access Point and Client - Optional Accessories MMO24580608NF WMLPVIDB244958PTRPC MP24580809PTNF General Data Type Rod antenna Low-profile antenna Panel antenna Radiation type Omnidirectional Omnidirectional Directional Antenna connector N (f) RP TNC (m), 40 cm N (f), 30 cm Frequency range 2400 2485 / 5150 5850 MHz 2400 2500 / 4900 5825 MHz 2300 2500 / 4940 5850 MHz Gain 6 / 8 dbi 4 / 4 dbi 8 / 9 dbi Cable group 1 2 1 Cable group 1 N-connector Antenna to SMA Reverse WI-FI AP CBL-195-02M-N1-S2 2 meters CBL-195-05M-N1-S2 5 meters CBL-240-10M-N1-S2 10 meters Cable group 2 TNC Bulkhead in control cabinet to AP with SMA Reverse CBL-195-01M-T10-S2 1 meter Box Contents 1x Industrial Access Point 1x Terminalblock 3-pin 1x DIN Rail Kit (mounted on device) 1x Quick Start Guide 1x CD (Manual) Box Contents Set 1x Industrial Access Point 2x 3/5 dbi Antenna 1x Power supply 1x Terminalblock 3-pin 1x DIN Rail Kit (mounted on device) 1x Quick Start Guide 1x CD (Manual) CAT--V1.1-EN ed. 12/16 Welotec GmbH 8