050-129 PRODUCT BRIEF Media Converter Assembly 10/100/1000BASE-T to 100BASE-FX or 1000BASE-SX/LX/EX, Mighty Mouse Connectors 28VDC or USB Bus Power REV DESCRIPTION DATE APPROVED 3 Preliminary 07/28/2016 TC/GC/MF 4 Preliminary, Updated 2D s and Absolute Maximum Voltage 01/10/2017 MT/RAS/GC 5 Add Flow Control Option 04/05/2017 RAS/GC 6 Update Copyright date 05/26/2017 GC 7 Updated pictures 08/30/2018 RAS/GC BF16U2-4517 THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
Ethernet MC, 10/100/1000BASE-T to 100BASE-FX/1000BASE-SX/LX/EX The Glenair 050-129 is a 10/100/1000BASE-T to 100BASE-FX or 1000BASE-SX/LX/EX copper to fiber media converter. The enclosure incorporates three environmental Might Mouse connectors. J1 and J2 connectors are used for power and electrical signal and Built In Test (BIT) via USB 2.0. J3 connector used for fiber optics may be selected to be either a Mighty Mouse or a GMA (M83526/20) KEY FEATURES/BENEFITS 1310nm FP Lasers for 1000BASE-LX10 1310nm DFB Lasers for 1000BASE-EX InGaAs PIN PD for 1000BASE-LX10 & -EX 850nm Lasers for 1000BASE-SX GaAs PIN PD for 1000BASE-SX 1300nm LED for 100BASE-FX PIN PD for100base-fx Wide Input Voltage Range: 18-36V or 5V USB VBUS Option to implement Flow Control Electrical Interface compliant with IEEE 802.3 (10/100/1000BASE-T) Optical Interface compliant with IEEE 802.3 (1000BASE-LX10 or 1000BASE-SX) Might Mouse Fiber Optic Connector BIT FEATURES Console Port accessible via USB2.0 (CDC Device) APPLICATIONS Harsh Environment Ethernet for Airborne, Tactical and Shipboard applications www.glenair.com PAGE 2 of 18 E-mail: sales@glenair.com
Functional Block Diagram Flow Control Ethernet flow control is a mechanism for temporarily stopping the transmission of data on Ethernet computer networks. If data flow between the two devices connected to the media converter will vary in rate, it is up to the end user to ensure their higher speed devices are throttled correctly to ensure loss of data does not occur over time. Flow control can be enabled at the factory if so desired. Contact the factory for more details. www.glenair.com PAGE 3 of 18 E-mail: sales@glenair.com
Connectors NAME Insert Arrangement Function Media Converter Connector Mating Connector J1 Electrical Signal Square Flange MM, Similar to Glenair P/N: 801-009-02##7-10PA Mighty Mouse Glenair P/N: 801-007-26##7-10SA 10X Size 23 Pins J2 Series 801 7-10, PIN face shown Status and Built in Test (BIT), & Power Square Flange MM, Similar to Glenair P/N: 801-009-02##7-10PB Mighty Mouse Glenair P/N: 801-007-26##7-10SB 10X Size 23 Pins Series 801 7-10, PIN face shown J3 Fiber Optic Receptacle Mighty Mouse 801-009-02##9-4AA 181-057 Pin Terminus Mighty Mouse Glenair P/N: 801-007-26##9-4BA Series 801 9-4, PIN face shown Alternative: M83526/20 Mini Version Note: # = Environmental Class (Material/Finish) www.glenair.com PAGE 4 of 18 E-mail: sales@glenair.com
Built In Test (BIT) Functionality This media converter will include built in test functionality accessible through a console port via Universal Serial Bus 2.0 (USB 2.0). Presents itself as a Virtual Communications Port when using USB (CDC Device) Compatible with Microsoft Windows, Mac, and Linux OS s. On the computer side, open any terminal application (PuTTY, HyperTERM, TeraTERM, etc.) to communicate with the media converter hardware. Simple Human Readable status messages. TYPICAL CONSOLE WINDOW (PuTTY) ******************************** Glenair * Media Converter Service Port * ******************************** Unit Identification Information ******************************** Product Code: 050-129 Unit Serial Number: 0145 Firmware Revision: 1.2.0 Product Description: 10/100 Ethernet Copper to Fiber Media Converter ******************************** Unit Status ******************************** Temperature: 45 degrees C Power Supply Status: Good RX Loss of Signal, CH1: False Transceiver Disable, CH1: False Transceiver, TX Fault, CH1: False Copper-Side Link Status, CH1: Up Fiber-Side Link Status, CH1: Up www.glenair.com PAGE 5 of 18 E-mail: sales@glenair.com
Ratings and Specifications ABSOLUTE MAXIMUM RATINGS Storage Temperature -55 +100 C Supply Voltage 28V Input -0.5 28 40 V 1 second maximum, 40V Supply Voltage USB Bus Powered -0.5 5 5.75 V OPERATING CONDITIONS Operating Temperature -40 +85 C Supply Voltage 28V Input 18 28 36 V Supply Current 28V Input 70 110 ma Supply Voltage USB Bus Powered 4.75 5.0 5.25 V Supply Current USB Bus Powered 425 500 ma www.glenair.com PAGE 6 of 18 E-mail: sales@glenair.com
Ratings and Specifications LX VERSION OPTICAL CHARACTERISTICS TRANSMITTER Optical Output Power POUT -8.5-4 -1 dbm 1310nm Fabry-Perot Optical Wavelength λout 1280 1310 1345 nm Spectral Width Δλ 2.75 nm OPTICAL CHARACTERISTICS RECEIVER Optical Sensitivity ( Input Power Range) PIN_OP -20 0 dbm Min. Sensitivity, BER 10-12, PRBS 2-7 -1 PIN_MIN -22-20 dbm PIN PD, LX10 source Overload, BER 10-12, PRBS 2-7 -1 PIN_MAX -1 dbm Optical Wavelength λin 1270 1600 nm ETHERNET COMPLIANCE Parameter Medium Type Distance Notes Gigabit Ethernet, IEEE 802.3ab, 1000BASE-T Gigabit Ethernet, IEEE 802.3z, 1000BASE-LX10 TIA/EIA-568-B Cat 5E Single Mode Fiber (9/125µm) 100m 10km www.glenair.com PAGE 7 of 18 E-mail: sales@glenair.com
Ratings and Specifications EX VERSION OPTICAL CHARACTERISTICS TRANSMITTER Optical Output Power POUT -1 +1 +3 dbm 1310nm DFB Optical Wavelength λout 1290 1310 1330 nm Spectral Width Δλ 1 nm OPTICAL CHARACTERISTICS RECEIVER Optical Sensitivity ( Input Power Range) PIN_OP -20 0 dbm Min. Sensitivity, BER 10-12, PRBS 2-7 -1 PIN_MIN -22-20 dbm PIN PD Overload, BER 10-12, PRBS 2-7 -1 PIN_MAX -1 dbm Optical Wavelength λin 1270 1600 nm ETHERNET COMPLIANCE Parameter Medium Type Distance Notes Gigabit Ethernet, IEEE 802.3ab, 1000BASE-T Derived from Gigabit Ethernet, IEEE 802.3z TIA/EIA-568-B Cat 5E Single Mode Fiber (9/125µm) 100m 40km** ** 19dB optical Loss budget, 0.35dB/km loss assumed www.glenair.com PAGE 8 of 18 E-mail: sales@glenair.com
Ratings and Specifications SX VERSION OPTICAL CHARACTERISTICS TRANSMITTER Optical Output Power POUT -7-1 dbm VCSEL, 50/125µm MM Optical Wavelength λout 830 850 860 nm Spectral Width Δλ 0.85 nm OPTICAL CHARACTERISTICS - RECEIVER Optical Sensitivity (Input Power Range) PIN_OP -17-2 dbm Min. Sensitivity, BER 10-12, PRBS 2-7 -1 PIN_MIN -22-17 dbm PIN PD, 50/125µm MM Overload, BER 10-12, PRBS 2-7 -1 PIN_MAX -2-1 dbm Optical Wavelength λ IN 770 850 860 nm ETHERNET COMPLIANCE Parameter Medium Type Distance Notes Gigabit Ethernet, IEEE 802.3ab, TIA/EIA-568-B Cat 5E 100m 1000BASE-T Gigabit Ethernet, IEEE 802.3z, OM3 MMF (50/125µm) 550m 850nm VCSEL 1000BASE-SX OM1 MMF (62.5/125µm) 275m www.glenair.com PAGE 9 of 18 E-mail: sales@glenair.com
Ratings and Specifications FX VERSION OPTICAL CHARACTERISTICS TRANSMITTER Optical Output Power POUT -19-14 dbm 1300nm LED (IEC 9314-3) Optical Wavelength λout 1260 1310 1380 nm Spectral Width Δλ 147 nm OPTICAL CHARACTERISTICS - RECEIVER Sensitivity, BER 10-10, PRBS 2-7 -1 PIN -32 dbm PIN PD Overload, BER 10-10, PRBS 2-7 -1 PIN -14 dbm Optical Wavelength λ IN 1270 1310 1380 nm ETHERNET COMPLIANCE Parameter Medium Type Distance Notes Fast Ethernet, IEEE 802.3u, 100BASE-T Fast Ethernet, IEEE 802.3u, 100BASE-FX, IEC 9314-3 TIA/EIA-568-B Cat 5E MMF (62.5/125µm) 100m 2km www.glenair.com PAGE 10 of 18 E-mail: sales@glenair.com
Ratings and Specifications - (continued) COMPLIANCE SPECIFICATIONS CHARACTERISTIC Standard Condition Notes Mechanical Shock MIL-STD-810 40g 6-9 ms Mechanical Vibration MIL-STD-810 7.7g rms ESD MIL-STD-883 Class II 2200V HBM Conducted Emissions, Power Leads, 30 Hz to 10 khz MIL-STD-461F CE101 Applicable only when powering from 28V input Conducted Emissions, Power Leads, 10 khz to 10 MHz MIL-STD-461F CE102 Applicable only when powering from 28V input Conducted Susceptibility, Power Leads, 30 Hz to 150KHz MIL-STD-461F CS101 Conducted Susceptibility, Transients, MIL-STD-461F CS106 Power Leads Conducted Susceptibility, Structure Current, MIL-STD-461F CS109 60 Hz to 100 khz Conducted Susceptibility, Bulk Cable Injection, 10 khz to 200 MIL-STD-461F CS114 MHz Radiated Susceptibility, Magnetic Field, 30 Hz to 100 khz MIL-STD-461F RS101 Radiated Susceptibility, Electric Field, 2 MHz to 18 GHz MIL-STD-461F RS103 Radiated Emissions, Magnetic Field, MIL-STD-461F RE101 30 Hz to 100 khz Radiated Emissions, Electric Field, 10 khz to 18 GHz MIL-STD-461F RE102 Mating Durability MIL-DTL-38999/20 500 Cycles Flame Resistance EIA364-104 30 seconds Damp Heat EIA364-321 240 hours Aircraft Electrical Power Characteristics MIL-STD-704F 28V DC Systems Eye Safety CDRH and IEC-825 Class 1 Laser Product www.glenair.com PAGE 11 of 18 E-mail: sales@glenair.com
Ratings and Specifications - (continued) Material/Finish Item Housing & Connector Shell Plating Finish: M Contacts Mighty mouse Inserts Interfacial Seals, MM only Optical Ferrules & Sleeves Insulators Contact retention clip Seal, O-rings Seal Spring PC tail contacts PCB flex Encapsulant Solder type: Connector PC Tails to PCBA Solder type: PCBA component attach Material/Finish Aluminum Nickel Copper alloy, 50 μinch gold plated Thermoplastics Elastomer, Fluorosilicone Zirconia, Ceramic Liquid crystal polymer (LCP) Beryllium copper alloy Fluorosilicone rubber Silicone elastomer Nickel-plated beryllium copper Copper alloy/gold plated FR4 & Polyimide HYSOL Sn63Pb37 RoHS compliant Sn95/Sb5 (232 C melting temp) & RoHS compliant Sn96.5/Ag3.0/Cu0.5 (217 melting) Material/Finish www.glenair.com PAGE 12 of 18 E-mail: sales@glenair.com
OUTLINE DRAWING MEDIA CONVERTER Dimensional Tolerances Unless specified otherwise: 0.x ± 0.1 0.xx ± 0.03 0.xxx ± 0.005 Marking: Assembly is identified with Manufacture s Name, Cage Code, Part Number, Date Code and Serial Number in approximate location shown Connectors will be covered with protective caps at time of shipment **Shown with Mighty Mouse 801 connectors, M83526/20 Optional configuration not shown, M83526/20 layout dimensions are to be determined. Please contact Glenair for other configurations www.glenair.com PAGE 13 of 18 E-mail: sales@glenair.com
Recommended Cable Sets -- Ethernet www.glenair.com PAGE 14 of 18 E-mail: sales@glenair.com
www.glenair.com PAGE 15 of 18 E-mail: sales@glenair.com
Recommended Cable Sets USB 3.0 www.glenair.com PAGE 16 of 18 E-mail: sales@glenair.com
Recommended Cleaning and Inspection Tools/Kits Inspection Kit For the JDSU video borescope, the tip part numbers for the pin and the socket contacts are: Pin(connector plug) Glenair p/n: GIT-006 Socket (connector receptacle, ship side) Glenair p/n: GIT-007 www.glenair.com PAGE 17 of 18 E-mail: sales@glenair.com
Recommended Cleaning and Inspection Tools/Kits -- Continued J3 FIBER OPTIC CONNECTOR 801-009 SERIES - Media converter www.glenair.com PAGE 18 of 18 E-mail: sales@glenair.com