LEADER OF RF BROADBAND SOLTIONS Clarke & Severn Electronics Ph + Email sales@clarke.com.au www.clarke.com.au RFSPTA000GSB Absorptive Coaxial SPT Switch 0. - 0GHz Electrical Specifications, TA = + C, SB Powered Description PN: RFSPTA000GSB SPT Absorptive Switch Low Power Cold Switching Parameters Min Typ. Max Min Typ. Max Min Typ. Max nits Frequency Range 0. 0 GHz Insertion Loss...... db Insertion Loss Temperature Coefficient 0.00 0.00 0.00 db/ C Isolation 0 0 0 db Input VSWR... : Output VSWR... : RF Input power (CW) 0 0 0 dbm DC Power Dissipation 0. 0. 0. W 0.dB Compression Point (P 0.dB) 0 0 0 dbm IIP dbm Weight.0 ounces Impedance 0 Ω Bias Current 0 ma Control Interface Switching Speed Input / Output Connectors Finishing Material Features Wide Band Operation 0. 0GHz SB Controlled and Powered. Low Insertion Loss and High Isolation Customization available upon request Control SW included. Typical Applications Automated Test Aerospace and military applications SB.0 (Control Cable Included) 00~00 ms SMA Female Nickel Plated Aluminum Absorptive Coaxial Single Pole Double Throw Switch 0. - 0GHz
LEADER OF RF BROADBAND SOLTIONS RFSPTA000GSB Absolute Maximum Ratings RF Input Power +0dBm Environmental Specifications Operational Temperature ( C) ~ + Ordering Information Storage Temperature ( C) ~ + Part No. ECCN Description RFSPTA000GSB EAR Typical Performance Plots Insertion Loss @+ Ch Base Freq Start Base 00 Pwr MHz 0 dbm Output VSWR @+ SPT 0. 0GHz PIN Diode Switch Trc S db Mag. db / Ref 0 db Cal S 00.00000 MHz -0. db. 0.000000 GHz -.0 db. 0.000000 GHz -. db.. 0.0 -. -. -. -. Stop GHz Trc S SWR / Ref Cal S 00.00000 MHz. 0 0.000000 GHz.0 0.000000 GHz.0 Ch Base Freq StartBase 00 Pwr MHz 0 dbm Stop GHz Vibration Shock Input VSWR @+ Trc S SWR / Ref S 0-0 -0 Ch Base Freq Start Base 00 Pwr MHz 0 dbm Isolation @+ g RMS ( degrees KHz) endurance, hour per axis 0G for msec half sine wave, axis both directions Cal 00.00000 MHz 0.000000 GHz 0.000000 GHz.0.. Stop GHz Trc S db Mag 0 db / Ref 0 db Cal 0 S 00.00000 MHz -. db -0 0.000000 GHz -. db -0 0.000000 GHz -. db -0-0 -0-0 -0 Ch Base Freq StartBase 00 Pwr MHz 0 dbm Stop GHz Absorptive Coaxial Single Pole Double Throw Switch 0. - 0GHz
LEADER OF RF BROADBAND SOLTIONS Insertion Loss @ Input VSWR @ RFSPTA000GSB Trc S db Mag. db / Ref 0 db Cal S 00.00000 MHz -0. db. 0.000000 GHz -. db. 0.000000 GHz -.0 db.. 0.0 -. -. -. -. Ch Base Freq Start Base 00 Pwr MHz 0 dbm Output VSWR @ Insertion Loss @+ Output VSWR @+ Stop GHz Trc S SWR / Ref Cal S 00.00000 MHz. 0 0.000000 GHz. 0.000000 GHz. Ch Base Freq StartBase 00 Pwr MHz 0 dbm Stop GHz Ch Base Freq Start Base 00 Pwr MHz 0 dbm Trc S SWR / Ref S 0-0 Trc S db Mag. db / Ref 0 db Cal S 00.00000 MHz -.0 db. 0.000000 GHz -. db. 0.000000 GHz -.0 db.. 0.0 -. -. -. -. Stop GHz Trc S SWR / Ref Cal S 00.00000 MHz. 0 0.000000 GHz.0 0.000000 GHz.0 Ch Base Freq StartBase 00 Pwr MHz 0 dbm Stop GHz -0 Ch Base Freq StartBase 00 Pwr MHz 0 dbm Isolation @ Input VSWR @+ Isolation @+ Cal 00.00000 MHz 0.000000 GHz 0.000000 GHz..0. Stop GHz Trc S db Mag 0 db / Ref 0 db Cal 0 S 00.00000 MHz -. db -0 0.000000 GHz -. db -0 0.000000 GHz -0. db -0-0 -0-0 -0-0 Ch Base Freq Start Base 00 Pwr MHz 0 dbm Stop GHz Trc S SWR / Ref Cal S 00.00000 MHz. 0 0.000000 GHz. 0.000000 GHz. Ch Base Freq StartBase 00 Pwr MHz 0 dbm Stop GHz Trc S db Mag 0 db / Ref 0 db Cal 0 S 00.00000 MHz -.0 db -0 0.000000 GHz -. db -0 0.000000 GHz -. db -0-0 -0-0 -0-0 Ch Base Freq StartBase 00 Pwr MHz 0 dbm Stop GHz Absorptive Coaxial Single Pole Double Throw Switch 0. - 0GHz
LEADER OF RF BROADBAND SOLTIONS RFSPTA000GSB Outline Drawing: All Dimensions in mm [inches]. [0.] [0.]. [0.] [.] [0.] J0 J J RF-Lambda RFSPTA000GSB F:0.-0GHz SN:XXXXXXXXXX SB 0. [0.0] SB - A-Male -.[0.0] THR [0.] Absorptive Coaxial Single Pole Double Throw Switch 0. - 0GHz
LEADER OF RF BROADBAND SOLTIONS RFSPTA000GSB Figure (SB Control Panel) Absorptive Coaxial Single Pole Double Throw Switch 0. - 0GHz
LEADER OF RF BROADBAND SOLTIONS RFSPTA000GSB Important Notice The information contained herein is believed to be reliable. RF Lambda makes no warranties regarding the information contained herein. RF Lambda assumes no responsibility or liability whatsoever for any of the information contained herein. RF Lambda assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for RF Lambda products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. RF Lambda products are not warranted or authorized for use as critical components in medical, life saving, or life sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Absorptive Coaxial Single Pole Double Throw Switch 0. - 0GHz