Quality satellite reception for life stronger material very resistant to the effects of corrosion or rust

New Product 2014

Signal reception & LTE Solutions Quality satellite reception for life stronger material very resistant to the effects of corrosion or rust THE LONG LIFE ALLUMINIUM DISH Aluminium dish reflector, with diecast Zamak LNB holder Folding arm for fast and easy mounting Inox screws TÜV Approved Pre-mounted support and arm Robust back support. Hot galvanized Hidden cable routing system with folding tabs SATELLITE THE PERFECT SATELLITE RECEIVER FOR HD COMPATIBLE SETS THE BEST RECEPTION IN HIGH DEFINITION (FULL HD, HD READY, 1080p, 1080i, 720i, etc) TIMESHIFT 5W Stand by 0,3W LOW CONSUMPTION SCR SCR COMPATIBLE REC USB PVR READY TELEVES, PLAYING A LEADING ROLE In the previous months before the Astra analogue shutdown, television end users and telecommunication professionals in Germany received a great deal of information regarding the process and milestones. Televes was a catalyst in this scenario by placing a complete range of professional products to make a smooth technical transition in distribution networks for buildings and homes. Televes has received very positive feedback regarding the performance of the T.0X headends, which allowed installers to easily accomplish the distribution of the new DVB-S2 services. Also well regarded in this process was the Digital Processing capabilities of the H45 portable field spectrum analyser, giving mathematical precision in all signal measurements. In addition, Televes presented the ZAS-HD Sat set-top box and the QSD line of high quality sat dishes, homologated and a certain guarantee for long term exposure to harsh climate conditions. 2 TELEVES NEWS 2014

The complete family of Intelligent aerials BOSS Tech is an advanced electronical device developed by Televes that converts the DATHD in an intelligent aerial. Turn on the intelligence of the DATHD by powering the antenna with a voltage between 12 and 24 Vdc. The DATHD becomes active and will automatically adjust its output signal to the optimum level. No matter how weak the original signal is received because you may be in a low coverage, or shadow area. No matter how strong either, because you might be too close to a transmitter. In 2012, the intelligence of the BOSS Technology is also extended to the full family of Televes external and internal aerials. TOO STRONG TOO WEAK with automatic signal balance PERFECT SIGNAL with intelligent protection INTELLIGENT ROOF TOP ANTENNA DAT HD BOSS 790 This antenna has been designed to optimize rejection to the LTE band whilst keeping the reception characteristics in the UHF band, it is an evolution of the DAT HD BOSS antenna with angular triple array patented by Televes. The antenna incorporates the BOSSTech device, with improved electronic performance. NEW ASSEMBLY SYSTEM The new DAT incorporates a new folding mechanism of the directors and a cam mechanism in the reflector Rotarory folding mechanism Cam mechanism for the assembly of the reflectors The new folding mechanism of the directors not only simplifies the assembly of the antenna but also optimizes its transport and storage. 3

LTE Solutions 4G AUTOMATIC LEVEL ADJUSTMENT DTT DTT 100% PROTECTED 4G 431001 / 431002 The only device capable of transforming any aerial into a BOSSTech antenna, converting your active or passive aerial into an intelligent device. 360º INTELLIGENT INDOOR AERIAL TELEVES RELEASES THE NEW AERIAL INNOVA BOSS, The best possible indoor reception of DTT and HD and 3D services. No need to be pointed: Plug&Play. LTE Ready. SPECIFICALLY DESIGNED FOR INDOOR DTT RECEPTION. INTELLIGENT OUTDOOR AERIAL Ideal for its innovative design. PASSIVE OUTDOOR AERIAL Ideal for boats and recreational vechicles. 4 TELEVES NEWS 2014 Novedades 2014_ANGA_EN.indd 4 09/05/2014 11:31:56

Ch.59 Ch.58 Ch.60 CSG Technology (Channel Selection Geometry) is a new concept in the design and manufacture of antennas; the antenna can perform as an adjustable filter by means of changing its geometry. Three aerials in one. Change the position of the directors and modify the antenna frequency response and filter the dxsds bandwidth at channels 58, 59 or 60. Ref. 149201 & 149202 LTE READY DTT ANTENNA WITH CONFIGURABLE BANDWIDTH WITH CSG TECHNOLOGY Technical specifications Mode CLOSED DIRECTORS (Ch21-Ch58) TOP OPEN (Ch21-Ch59) FULLY OPEN (Ch21-Ch60) Work band Mhz 470-774 CH 21-58 470-782 CH 21-59 Gain dbi 15 Front-to-Back- ratio db >23 Wind load N 93@130Km/h 128@150Km/h 470-790 CH 21-60 CH 58 LTE/4G CH 59 LTE/4G CH 60 LTE/4G L 790 ANTENNA Monolithic and rugged antenna with rejection against LTE/4G An antenna designed for UHF band reception (Ch21 - Ch60) and LTE/4G signal rejection. Compact and light weight, it stands out because of its robustness, directivity and gain. Its aluminium structure ensures durability and reliability of its characteristics. (dbi) 20 15 10 5 0-5 -10-15 -20-25 Ref. 112140 & 112141 Reference 112140 / 112141 Channels 21-60 Gain dbi 13 Front-to-Back ratio db 26 Length mm 1180 Wind load 800 N/m 2 73 N 1100 N/m 2 100,3 Wind conditions Antenna height m > 20 Wind pressure N/m 2 1100 Wind speed Km/h 150 5

LTE Solutions PLUG-IN INDOORS (F & IEC) EASY F OUTDOORS The most reliable and quick connection Reduces the installation time by 50% 404411 404412 Built-in system You will never require extra connectors 403101 403401 405101 405401 REF FILTERS Pass band (MHz) Rejected band (MHz) Pass band attenuation (db) Rejected band attenuation (db) 405101 LTE 1I/1O EasyF Ch 21-58 403101 LTE 1I/1O F Ch 21-58 470-774 791-862 <3 (7@774MHz) >25 404411 LTE 1I/1O IEC Ch 21-58 405401 LTE 1I/1O EasyF Ch 21-60 <1 403401 LTE 1I/1O F Ch 21-60 5-790 (5@790MHz) 404412 LTE 1I/1O IEC Ch 21-60 793-821 >20 403301 CAVITIES 1I/1O F Ch 21-60 <0,5 (2@790MHz) 403302 CAVITIES 1I/1O F Ch 21-59 5-782 <0,5 (1@782MHz) >35 The quality in the filter s response can only be appreciated with graphs as the ones below, where the performance of the filter in the high UHF channels can be seen in detail. G (db) 0 C58 C60 G (db) 0 C57 C60-5 -5-10 -10-15 -15-20 -20-25 -30-25 -30-35 -35-40 -45-40 -45-50 700 716,2 732,4 748,6 764,8 781 797,2 813,4 829,6 845,8 862 F (MHz) -50 700 716,2 732,4 748,6 764,8 781 797,2 813,4 829,6 845,8 862 F (MHz) C58 LTE filter rejects signals from 774MHz onwards. Specifically recommended for DTT installations with multiplex below channel 58. C60 LTE filter rejects signals from 782MHz onwards. Specifically recommended for DTT installations with multiplex channels 59 or 60. 6 TELEVES NEWS 2014

MICROCAVITIES FILTER (F FORMAT) G (db) 0 C58 C60 PATENTED -5-10 -15-20 -25-30 -35-40 -45 403301 403302-50 700 727 742 757 772 787 802 817 832 Microcavities LTE C60 filter it rejects signals above 782MHz with minimum insertion losses. 847 862 F (MHz) The new version of microcavities filter is made with ceramic filters. One of the great advantages of these components is the wide range of temperatures in which the filter characteristics are kept. Thanks to this new architecture, the frequency response is unchanged in temperatures ranging from -20 ºC to 65ºC. This ensures the filtering effectiveness in situations which the filter is subjected to extreme environmental conditions. In addition this filter adds extraordinary behavior before vibration; for it, you get an ideal component for the rejection of the LTE signals that also preserves the integrity of DTT signals. CLASS A+ PRO EASyF CONNECTORS The coaxial cable, despite being a decisive factor in a facility, can not be considered as the great responsible for its effective functioning. The quality of the connectors is essential and is defined by aspects such as shielding, robustness in central connector contacts and reliability of the grid connection. The new ProEasyF connectors provide a A+ shielding and facilitate assembly by a single screw that ensures a pressure on the central conductor more effective than using compression connectors. Made of Zamak-5 with zinc, these connectors provide an extraordinary durability, supported by countless facilities with PRO connectors installed on previous generations. Ref.413210 Ref.413310 Ref.413410 7

CA operators One outlet manufacturer offering solutions for all scenarios CA OPERATORS APPROVED DON T LET DIGITAL quality DISSIPATE THROUGH THE CONNECTION Ready for any cable dimension. High reliability Fully automated production. Easy mounting lateral opening clamp. Inner conductor fit by a simple click. DATA FM 0 5 88 109 138 1300 FULLY AUTOMATED MANUFACTURING Line Amplifiers IEC AND F SERIES Wide range of domestic amplifiers for MA applications, featuring high output level and low power consumption. Fully automatic production. 50% lower power consumption than an standard amplifier. Low noise figure. Adjustable gain. Up to 5 outputs. PICOKOM SERIE No need of gain adjustment. The product includes an advanced system that automatically adjusts the gain for optimal output level. Different products including LTE filter in 790 version. ON/OFF switch to activate DC power to the input (for preamplifiers) Aesthetic design and small size (86x65x26 mm). Fits into 100x100 mm connection boxes. Possibility of being fixed to the wall. Easy mounting. Complies with the maximum bending radius of the coaxial cable. Proven track record in security, immunity, electrical performance and component quality 8 TELEVES NEWS 2014

Amplifiers Wide range of amplifiers that offers all solutions in all scenarios BROADBAND RANGE OF PRODUCTS DESIGNED FOR DOCSIS 3.0 Full configuration at a glance. High efficiency switch-mode power supply. Configuration by internal jumpers. Selectable cable equaliser (2dB steps) Selectable gain (2dB steps) Selectable return path (passive / 20dB /25dB / 30dB) RETURN CHANNEL ATTENUATOR (2DB STEPS) INPUT AND OUTPUT TEST (-20DB) AMpliFier's setting up Forward path input attenuator 0-18 db, 2 db steps Forward path input equalizer 0-18 db, 2 db steps Forward path interstage equalizer 0 or 6 db Forward path interstage attenuator 0 or 6 db 0 db 6 db 0 db 6 db Test Test Forward path input Return path output Return path interstage equalizer 0/3/6 db Return path input attenuator 0-18 db, 2 db steps Forward path output Return path input 9

Measure Equipment with Digital Processing NOW WITH JETZT MIT DOCSIS 3.0 Big features, small package H30 Handheld Meter is designed for the operator. The meter has all the functions necessary to make easier the installation and maintenance of networks with QAM signals and/or NTSC analog signals. DOCSIS 3.0 measures are available in the new 593103. MAIN FEATURES Easy to use. Remote control. Complete set of Analog/Digital measures with Quality Check Marks ( Pass/fail indicators ) easy to understand. Simple and intuitive user interface with functions like: Measurements in channel, Scanning, TILT Function, Constellation display, Spectrum analyzer, Voltmeter, HUM, Service identification, DataLogger, etc. Rugged, light weight, automatic, quick and precise. Automatic software upgrade. Automatic ITU-T J.83 Annex A/B/C parameter detection without a previous setup. Spectrum of 1 GHz of band with channel selection or frequency. Technology of digital processing in real time. A basic meter with digital processing advantages and the most useful functions 10 TELEVES NEWS 2014 Novedades 2014_ANGA_EN.indd 10 09/05/2014 11:32:31

REF. DESCRIPTION 593102 H30 (DVB-C + REMOTE CONTROL) 593103 H30 (CA + REMOTE CTRL + DOCSIS 3.0) 593201 H30 WEATHERPROOF BAG 593202 H30 SPARE BATTERY 593203 H30 12V-2A POWER SUPPLY 593210 H30 INFO MPEG OPTION 593211 H30 IP SPEED TEST OPTION CHANNEL MEASUREMENTS CONSTELLATION DISPLAY SPECTRUM ANALYzER NEW FUNCTIONS & OPTIONS Online Activation. MPEG services (option ref.593210) Channel full rate and service rate. TSID, NIT, etc. Services name. Encrypted channels information. IP TEST (option ref.593211) Ethernet connectivity status. ICMP (PING) statistics. Uplink and Downlink rate. DOCSIS 3.0 (ref.593103) D3.0 connection status. Graphical measurements of Upstream / Downstream. Speed test. quality PROFILES INFO DOCSIS 3.0 STATUS INTUITIVE USER INTERFACE INFO (2) DOCSIS 3.0 GRAPH IP TEST PASS/FAIL INDICATORS TILT FUNCTION MAIN FEATURES Digital processing. TFT 5 RGB digital Display 640 x 480. Multistandar (DVB-T, DVB-S, DVB-S2 and analogic measures) COMBO MODE BER AND SPECTRUM SPAN Combo Mode display. Advanced spectrum analyzer. Simple user interface. Compact, lightweight and user friendly. MPEG SPECTRUM ANALYzER OPTICAL CONFIGURATION 11

Measure Equipment with Digital Processing With DVB-T2 signals, the range of meters incorporates up to three references that include the analysis of these signals. For the measurement of LTE/4G signals, H60 has three different tools. LTE Check: this function assesses the need to insert a filter LTE and recommends the most appropriate Televes filter. LTE vs : it is possible to simultaneously display the LTE/4G signal spectrum (Downlink & Uplink) and the spectrum of any channel. Downlink - Uplink: it allows to display spectrums of the LTE /4G signal, and provides power measures of the channels they contain. The field strength meter with the best spectrum analyzer Spectrum analyser extended to 3,3 GHz Tilt function Measures network attenuation in channel and frequency MPEG4 with common interface video in HD HDMI output Selective optical interface DVB-T2 demodulation High resolution, high contrast screen Digital Processing enhanced More features in the most complete meter in the market DVB - T2 COMBO LTE CHECK REF. DESCRIPTION 5960 H60 ADVANCE FULL HD + CI + FO + 5..3300MHz 596003 H60 ADVANCE FULL HD + CI + 5..3300MHz 596004 H60 ADVANCE FULL HD+CI+FO+3,3GHz+DVBT2 596005 H60 ADVANCE (FULL HD+CI+3,3GHz)+FO SELEC. 596070 H60 ADVANCE MPEG4+CI+FO+DVBT2+3,3GHz 596071 H60 MPEG4+CI+FO+DVBT2+3,3GHz+ETH 596072 H60 AVANCE FULL HD +CI+ FO +DVBT2+ETH +GPS 596075 H60 MPEG4+CI+CWDM+DVBT2+3,3GHz+ETH DVB - T2 PARAMETERS DVB - T2 PARAMETERS Remote control of your H60 meter Ideal for extended signal tests of head-end and broadband distribution networks. LTE VS DOWNLINK-UPLINK Leave your H60 connected to any distribution network and manage the unit remotely. Once finished, export the results to any PC using the HSuite software (included) DVB - T2 CONSTELLATION 12 TELEVES NEWS 2014

Headends Efficient Ingenuity MUX DVB-S/S2 - COFDM / QAM CI TWIN Transmodulators Transmodulators that generates two multiplexes (COFDM ref.564301 or QAM ref.564401) from services whose origin is one, two or three SAT transponders in either DVBS (QPSK) or DVBS2 (QPSK /8PSK) modulation formats. Once extracted the MPEG2 TS, it is re-modulated in COFDM/ QAM format to obtain two output channel (7/8 MHz bandwidth) in VHF/UHF by means of a agile up-converter. Settings of operation parameters can be performed by means of the programming unit (ref. 7234): input frequency, output channel, modulation format and adaptation of services, mainly. Total or selective elimination of services received, so that they cannot be detected (and stored) by the STB*. Edition of TS_ID to facilitate detection of programs / services in the receiver (STB).* Edition of Network_ID, Original Network_ID and Cell_ID to control network IDs. Allows you to assign an LCN (Logical Channel Number) to the services present in the output, which facilitates the management of channels in the receiver (STB).* Through its CI interface, and the corresponding CAM module, encrypted satellite channels become free services. According to the CAM used (standard/ professional) it is possible open one or more services for free. DiSEqC function. 950 MHz 2150 MHz A B C 1 2 3 4 5 6 7 8 1 2 3 4 5 n 1 2 3 4 5 n 1 2 3 4 5 n 1 2 3 4 2 3 4 5 REF. DESCRIPTION 564301 MUX DVBS/S2 - COFDM CI TWIN Transmodulator 564401 MUX DVBS/S2 - QAM CI TWIN Transmodulator 1 2 3 4 2 3 4 5 47 MHz 862 MHz CONNECTIONS 1 SAT IF input 2 SAT IF input / output (loopthrough mode) 3 Power 4 Control BUS 5 CAM slot 6 Programming unit/ PC socket 7 RF input 8 RF output + 2 COFDM/QAM channel BLOCK DIAGRAM REF. 564301 SAT INPUT REF. 564401 Demodul. A Demodul. B Demodul. C Multiplexer 3:2 CAM CI Interface CAM COFDM Modulator COFDM Modulator Double Up Converter DVB-T OUTPUT Note: Due to the large number of manufacturers of CAM modules, it is a responsibility of the client to verify appropriate combinations of CAMs that will work properly with this transmodulator. SAT INPUT Demodul. A Demodul. B Demodul. C Multiplexer 3:2 CI Interface QAM Modulator QAM Modulator Double Up Converter DVB-C OUTPUT 13

Headends MUX DVB-T/T2 - COFDM CI TWIN Transmodulator Transmodulators that generates two multiplexes COFDM from services whose origin is one or two DVBT/T2 signals. This module provides DVBT2 new standard signals to actual /STB. Once extracted the MPEG2 TS, it is re-modulated in COFDM format to obtain two output channel (7/8 MHz bandwidth) in VHF/UHF by means of a agile up-converter. 1 2 3 Total or selective elimination of services received, so that they cannot be detected (and stored) by the STB*. Edition of TS_ID to facilitate detection of programs / services in the receiver (STB).* Edition of Network_ID, Original Network_ID to control network IDs. PID filtering. Allows you to assign an LCN (Logical Channel Number) to the services present in the output, which facilitates the management of channels in the receiver (STB).* Through its CI interface, and the corresponding CAM module, encrypted satellite channels become free services. According to the CAM used (standard/ professional) it is possible open one or more services for free. 4 5 6 7 8 REF. DESCRIPTION 565101 MUX DVBT/T2 - COFDM CI TWIN Transmodulator CONNECTIONS 1 DVBT/T2 input 2 DVBT/T2 input / output (loopthrough mode) 3 Power 4 Control BUS BlOCK DiAgrAM 5 CAM slot 6 Programming unit/ PC socket CAM 7 RF input 8 RF output + 2 COFDM channel ENTRADA DVB-T / DVB-T2 Demodul. A Demodul. B Multiplexor 2:2 Interfaz CI Modulador COFDM Modulador COFDM Up Converter Doble SALIDA DVB-T Note: Due to the large number of manufacturers of CAM modules, it is a responsibility of the client to verify appropriate combinations of CAMs that will work properly with this transmodulator. 14 TELEVES NEWS 2014

HD QAM ENCODER / MODULATORS This member of the T.0X family of headend products offers MPEG-2 or H.264 encoding of two (2) or four (4) HD video sources into one (1) QAM RF channel that can be broadcast over existing single-wire coax cable infrastructure to an unlimited number of HDs. 1 2 Two HDMI or HD component video channels multiplexed into one RF QAM channel. Two HD component video channels multiplexed into one RF QAM channel. Four composite video channels multiplexed into one RF QAM channel. Up to 1080p MPEG-2 and H.264 encoding. Real-time Dolby Digital audio encoding. Integrated RF Combiner and Ethernet switch for rapid deployment. Automatic remote firmware upgradeability. 3 4 5 6 7 8 REF. DESCRIPTION 563801 T.0X ENCODER TWIN composite to QAM 563802 T.0X ENCODER QUAD composite to QAM 563803 T.0X ENCODER TWIN composite HDMI to QAM BlOCK DiAgrAM CHANNEL 0 ANALOG AUDIO Y. PB. PR Ethernet 1Gb switch CONNECTIONS 1 ASI input 2 ASI output (loopthrough mode) 3 Power 4 ETHERNET 5 Programming unit 6 RF input 7 RF output +QAM channel ANALOG AUDIO L. R ANALOG COMPOSITE CLOSED-CAPTION DIGITAL OPTICAL AUDIO DIGITAL COAXIAL AUDIO CHANNEL 1 ANALOG AUDIO Y. PB. PR ANALOG AUDIO L. R ANALOG COMPOSITE CLOSED-CAPTION DIGITAL OPTICAL AUDIO DIGITAL COAXIAL AUDIO Converter A/D Converter A/D Encoder HD Encoder HD TS_0 TS_1 MULTIPLEXOR + MODULATOR QAM anex A/B Upconv. RF OUT RF LOO EAS ASI IN ALARM ASI OUT 15

Headends Headend remote control The adjust and programming of T.0X headends can be performed remotely using a Web application. This system provides the platform for IP services for multidevice distribution headend management. TSuite automatically adapts to any device and display type. It is available as APP in Google market for Android devices and in Apple market for IOS devices. RFoG Operator Solutions Televes is a comprehensive telecommunications supplier. Proof of this is the wide range of devices that allow the deployment of Triple Play services over fiber optics, for networks using DOCSIS and also GPON networks. EqUIPMENT FOR GPON NETWORKS OLT (ref.769401) with a XFP interface of 10GbE and 8 SFP GbE interfaces. The rates achieved are 2.488Gbps on downstream and 1,244Gbps on upstream. The OLT ref.769401 provides service to 512 users (64 ONT by each port). User ONT (ref.769502), has 4 ports GbE, WiFi, RF output (VideoOverlay) and 2 ports VoIP FXS. SFP GPON (ref.769410). 16 TELEVES NEWS 2014

RFoG Operator Solutions FIBER OPTICS T0X MODULES FOR RFOG Optical Transmitters, with and without return path, at 1310nm and 1550nm and different optical powers (4dBm, 6dBm and 10dBm) Optical Receivers with and without return path. EDFA Optical amplifier ref.234220. WDM Multiplexer ref.234701 Optical splitters. COAXDATA SYSTEM Set of devices that extend a data network over a coaxial network and/or over a fiber optic network. The Home Gateway is a home device that recovers the Ethernet network also serving as access point with Low Power WiFi. Coaxdata can provide service to existing coaxial networks with no need of modify the current installation. With a MAC filtering system, CoaxData has a software to manage the access of modems to network, the bandwidth limitation or the structure of virtual networks (VLAN). Using a Headend Management Unit (ref.5559), this network control can be done remotely via an SNMP agent and a web interface. EqUIPMENT FOR DOCSIS HOME NETWORKING A local network is established among users. Fiberkom Mininodes ref.238001, enable the passage of data traffic depending on the network management. It makes possible the connection with CableModems and STBs (1550nm at forward path and 1310nm/1600nm at return path). 85 db 85 db 85 db 85 db 85 db BlOCK DiAgrAM OF FiBerKOM node Forward path receiver OLC + TIA db Pre att. Amp. Diplexer Coupler Out MDU/MTU (MXU) Shared access to an ISP. master 85 db 85 db Return path transmitter (insertable) CW Amp. db Return att. Test 1 slave 85 db slave 85 db slave slave 17

RFoG Operator Solutions GPON SOLUTION Triple-Play network in Optical Fiber Coaxdata Home Gateway Coaxial Network Service Video Overlay Headend ETHERNET1 OLT-8CH Ref.769401 SFP GPON Ref.769410 HSI provider Switch L3 SFP 1Gbps RS232 10Gbps ETHERNET2 PON1 PON2 PON3 PON4 PON5 PON6 PON7 PON8 LINK ACT LINK ACT LINK ACT LINK 10Gbps ACT Phone Service Service Internet Service Management System ETH Optical receiver 1Gbps HD 1 17 2 18 3 19 4 8 x 64 Optical Network Defaults Coax/Hybr Medium Link + Data LOS Coaxdata Master FTTH RFin Internet Service ONT Ref.769502 Phone Service 4 Service RFin Downstream Data 2.5Gb/s 1490nm Video Overlay 1550nm Upstream Data 1.25Gb/s 1310nm 18 TELEVES NEWS 2014 Novedades 2014_ANGA_EN.indd 18 09/05/2014 11:33:03

Multiswitches The new range of Televes Multiswitches can be configured as stand-alone or cascade by means of external switch. Every output terminal has its own potentiometer to adjust signal in outlets. All inputs are QUAD COMPATIBLE in 5 input versions. Eco mode: low consumption and power efficiency. Multiswitches X x 8 Band TERR SAT Frequency Range MHz 88...862 950...2400 Max input level 100 90/100 dbµv Max output level 84 89 Through Loss* 4 3 Tap Loss 6 0...6 db Isolation between inputs 35 Isolation between outputs 35 Power supply Vdc 12 Max consumption ma 50 Power supply for LNB** Vdc 12 * Passive return path 5...65MHz ** Powered through any of the inputs, VL Through output or external PSU MSW Amplifier X x 8 Band TERR SAT Frequency Range MHz 88...862 950...2400 Gain 20...30 16...26 db Adjustment Range 7 Output level DIN45004B dbµv 110 105 REF. DESCRIPTION 5 INPUTS 714501 5x5x4 714502 5x5x6 714503 5x5x8 714504 5x5x12 714505 5x5x16 714507 5x5x32 5 INPUTS QUAD COMPATIBLE 4402 5x5x6 QUAD 714403 5x5x8 QUAD 714404 5x5x12 QUAD 714405 5x5x16 QUAD 9 INPUTS 714601 9X9X8 714602 9X9X12 714603 9X9X16 714604 9X9X24 13 INPUTS 714701 13X13X8 714702 13X13X12 714703 13X13X16 714704 13X13X24 714705 13X13X32 17 INPUTS 714801 17X17X8 714802 17X17X12 714803 17X17X16 714804 17X17X24 714805 17X17X32 19

CMP 06000298 - FI 052014 televescorporation televes.com televes@televes.com