PU-06-KIT v.3 over Extender Set with IR Pass-through OPERATION MANUAL
Table of Contents. Introduction.......... 2. Applications........ 3. Package Contents...... 4. System Requirements......... 5. Features......... 6. Specifications.......... 7. Operation Controls and Functions...... 7. Front Panel... 7.2 Rear Panel.......... 8. Pin Assignment............... 8. IR Pin Assignment... 8.2 RJ-45 Pin Defi nitions... 0. Connection and Installation............ Acronyms... 2 3 4 4 5 6 6 6 7 9
. Introduction The.3 transmitter and receiver over is the ideal device to send your signals over long distances. Instead of using expensive cables, your existing cables/sockets can replace cables while performing the same functions like transferring Deep Color (2 bits/color) video and lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS- HD Master Audio) digital audio. Moreover, you can use the existing remote to control the source and connect it to another transmitter and receiver to extend your signal to distances you never thought possible. This.3 Transmitter and receiver is your only choice when looking for an extender. 2. Applications Showroom display/control Home entertainment systems Commercial displays Lecture room display/control 3. Package Contents.3 Transmitter x.3 Receiver x IR Receiver x IR Blaster x 5V DC power supply adaptor x 2 Operation Manual x 4. System Requirements input source equipment, output displayer, two cables and source equipment s remote control.
5. Features.3, HDCP. and DVI.0 compliant. Supports digital video formats in Deep Color Mode at up to 36 bits (2bits/ color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio. Supports cables for data/ transmission Equalizes and recovers any incoming TMDS data before re-transmitting it in fl awless quality regardless of the incoming signal. cable distance testing showed with 080p/8bits & 2bits resolution the Input/Output distance can reach up to 5/5 meters away. With cable, distance test with 080p/8bits & 2bits resolution the I/O source can run up to 45/20m away. Note: A. tested with /23AWG/Solid, using cables of another type may result in a different operating distance. B. distance tested with the following: PS3 40G, 37" Philips 8 bit LCD TV and 37" Samsung 2 bit LCD TV. C. Figures provided in this manual are for reference only, actual performance may depend on the source and display used along with the type of cable. Supports CEC bypass and xvycc Includes an IR Receiver and Blaster Supports wide range of IR frequencies from 30~50KHz Can be connected to another transmitter and receiver to extend an signal to an extreme distance 2
6. Specifications Transmitter Receiver Input Output Power Supply ESD Protection Dimensions (mm) Weight(g) Chassis Material Silkscreen Color Operating Temperature Storage Temperature Power Consumption Relative Humidity x x IR Blaster x Output Video x Output x x Receiver x Input for Video, x Input for 080p 8-bit (5M), 2-bit (5M) 080p 8-bit (5M), 2-bit (5M) 080p 8-bit (45M), 2-bit (20M) 5V/A (US/EU standards, CE/FCC/UL certifi ed) (US/EU standards, CE/FCC/UL certifi ed) Human body model: ± 8kV (air-gap discharge) ± 4kV (contact discharge) 78.5(W) x 7(D) x 30(H) / Transmitter 78.5(W) x 72(D) x 30(H) / Receiver 200 / Transmitter 90 / Receiver Aluminum Black Silver 0 C ~ 40 C / 32 F ~ 04 F -20 C ~ 60 C / -4 F ~ 40 F 3.6W/TX, 3.6W/RX 20 ~ 90% RH (non-condensing) 3
7. Operation Controls and Functions 7. Front Panel CH-06TX CH-06RX IR INPUT POWER 5V POWER 5V OUTPUT IR Transmitter Receiver 2 3 4 5 IR Transmitter: This slot is where you connect the IR blaster cable. Place the IR eye in front of the source equipment(s) in order to send an IR signal, the IR blaster has a frequency range from 30KHz to 50KHz. 2 INPUT: This slot is where you connect the or DVI output port of your source equipment such as DVD/Blu-ray players or set-top-boxes with an cable or receiver unit, you may also connect this device to another unit from the same family or some other type of splitter to further extend an signal. Example: DVD Player PU-06TX CH-06TX PU-06RX CH-06RX CLUX-22HC PU-22HC CLUX-H4CAT PU-QH4C CLUX-H8CAT PU-QH8C or LCD TV PU-06TX CH-06TX PU-06RX CH-06RX LCD TV 3 Power: This slot is where you plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet. 4 OUTPUT: This slot is where you connect the or DVI input port of your display such as HDTV s or HD monitors or you can connect this device to another unit from the same family or some other type of splitter to further extend an signal. 4
Example: PU-06TX CH-06TX PU-06RX CH-06RX DVD Player CH-06TX PU-06TX CH-06RX PU-06RX LCD LCD TV TV 5 IR Receiver: This slot is where you connect the IR receiver cable, place the IR eye in front of the display then use the existing remote to control the input source equipment. The IR receiver has a frequency range from 30KHz to 50KHz. 7.2 Rear Panel CH-06TX CH-06RX OUTPUT INPUT 2 2 input/output: Connect the output transmitter to the input of the receiver using a cable. 2 Video input/output: Connect the video output of the transmitter to the video input of the receiver using a cable. 5
8. Pin Assignment 8. IR Pin Assignment IR Blaster IR Receiver Power 5V 2 IR Blaster Signal 3 NC 23 IR signal 2 Power 5V 3 Grounding 2 3 8.2 RJ-45 Pin Definition Pin Video TMDS2+ SCL 2 TMDS2- N/A 3 TMDS+ SDA 4 TMDS- Power 5V 5 TMDS0+ GND 6 TMDS0- IR 7 TMDSC+ HPD 8 TMDSC- CEC 6
IR Receiver PU-QH4C PU-QH8C OUT OUTPUT IR Blaster x3 IN HD TV AorBorC DVD PU-22HC IN PU-06 Transmitter PU-06 Transmitter PU-QH4C PU-QH8C PU-O4H4C PU-22HC IN OUTPUT HD TV AorBorC 3m 7m 3m DVD 0. Connection and Installation PU-06 Transmitter PU-06 Transmitter IR Blaster DVD IN 7 OUTPUT.5m AorBorC IR BLASTER 3m 3m 7m IR RECEIVER
A B C IR Receiver IR Receiver.5m IR BLASTER 3m 3m 7m IR RECEIVER PU-06 PU-QC4H PU-QC8H PU-22HC 3m 3m 7m OUTPUT 3m 3m 7m OUTPUT HD TV HD TV HD TV AorBorC AorBorC 8
www.cypeurope.com