PT950 Heavy Industrial Incremental Encoder Linear Position to 550 inches (00 cm) luminum or Stainless Steel Enclosure Options VLS Option To Prevent Free-Release Damage IP67 NEM 6 Protection GENERL Full Stroke Range Options (on this datasheet) 0-75 to 0-550 inches Output Signal Options incremental encoder (quadrature) ccuracy 0.0% full stroke (contact factory for higher accuracy) Repeatability ± 0.0% full stroke ±/ pulse max. Resolution Options 0 to 50 pulses per inch Measuring able Options stainless steel or thermoplastic Enclosure Material powder-painted aluminum or 0 stainless steel Sensor optical incremental encoder Maximum Retraction cceleration Maximum Velocity Weight, luminum (Stainless Steel) Enclosure 8 lbs. (6 lbs.) max. ELETRIL Input Voltage Input urrent ENVIRONMENTL Enclosure NEM /X/6, IP 67 Operating Temperature 0 to 60 F (-7 to 7 ) Vibration up to 0 g to 000 Hz maximum 7.9 [00 mm] Output Signal: channel channel channel channel 5. [5 mm] With its incremental optical encoder and industrial design this rugged transducer provides the highest accuracy and longest life of any measurement device of its kind. This model is available in a wide variety of resolutions and output stages to fit virtually any requirement. It can measure up to 550, yet when its cable is retracted it is only 6 long. Its small size and low-cost-to-measurement ratio offers remarkable flexibility and value. 5. [ mm] -- for available channels 060 Plummer Street hatsworth, 9 Meas-Spec.com tel: 800..58 +.88.70.750 fax: +.88.70.799 PT950
Fig. Outline Drawing (8 oz. cable tension only) 0.85 [.6] 6.5 ±0.06 [5, ±,5] mounting hole detail 0.6 [6,] 0.7 [6,9] eyelet detail Ø.9 [,9]* Ø.75 [9,5]**.65 [,9]**.80 [,9].0 ±0.08 [7,9 ±,0] full extension full retraction.5 ±0.08 [,8 ±,0] DIMENSION (INHES) MESURING LE RNGE Ø.0 in. Ø.0 in. Ø.07 in. Ø.06 in. 75 n/a 0. 0.9 0.7 00 n/a 0.9 0.9 0.9 50 n/a 0. 0.59 0.7 00 n/a 0.58 0.79 0.98 50 n/a 0.7 0.98. 00 n/a 0.88.8.7 50 n/a.0.8.7 00 n/a.7.57.96 50 n/a..77 n/a 500 n/a.6.97 n/a 550.6.6 n/a n/a.90 [,5] 0.5 [6,] 5.6 [,] max..75 ±0.06 [0,7 ±,0] 7.87 [99,9] max. 5.0 [,6] DIMENSIONS RE IN INHES [MM] tolerances are 0.0 IN. [0.5 MM] unless otherwise noted. * tolerance = +.005.00 [+..0] ** tolerance = +.005.005 [+..] Ordering Information: Model Number: PT950- - - 0 order code: R D E F G Sample Model Number: PT950-0500 - - 0 R D E F range: enclosure/cable tension: measuring cable: cable exit: output signal: resolution: electrical connection: 500 inches aluminum/8 oz..0 nylon-coated stainless front TTL/MOS driver 00 ± pulses per inch 6-pin plastic connector Full Stroke Range: english ranges R order code: 0075 000 050 000 050 000 050 000 050* 0500* 0550* full stroke range, min: 75 in. 00 in. 50 in. 00 in. 50 in. 00 in. 50 in. 00 in. 50 in. 500 in. 550 in. metric ranges R order code: 500 750 5000 650 7500 8750 0000 50 500* 750* full stroke range, min: 500 mm 750 mm 5000 mm 650 mm 7500 mm 8750 mm 0000 mm 50 mm 500 mm 750 mm * 6 oz. cable tension strongly recommended tel: 800..58 +.88.70.750 fax: +.88.70.799 PT950
Ordering Information (cont.): Enclosure Material and Measuring able Tension: order code: tension (±0%): enclosure material: max. acceleration: max. velocity: 8 oz. 6 oz. powder-painted aluminum 0 stainless steel powder-painted aluminum 0 stainless steel g g 5 g 5 g 60 inches/sec 60 inches/sec 00 inches/sec 00 inches/sec standard housing see fig. dual-spring housing see fig. Measuring able: order code: cable construction: available ranges: general use: Ø.0-inch nylon-coated Ø.07-inch bare Ø.058-inch PV jacketed vectra fiber rope Ø.0-inch bare all ranges all ranges up to 500 inches all ranges up to 00 inches 550-inch range only indoor outdoor, debris, high temperature high voltage or magnetic field outdoor, debris, high temperature able Exit: order code: front top back down Output Signals: D order code: output driver: TTL - MOS Open ollector 5 V - Line Driver Universal Line Driver Input voltage ():.5... Vdc 0 m max. 80 m max. Input voltage (): 0.8...6. Vdc 0 m max. 80 m max. Input voltage (): 5 Vdc 0 m max. 50 m max. Input voltage (): 5...8 VD Source/Sink: 0 m max. 00 m max, no load.5... VD 0.8...6. VD 5 VD 5...0 VD output stage ( of 6) Resolution: E order code: english ranges: 00 ± pulses per in. 00 ± pulses per in. 50 ±5 pulses per in. 0 ±0. pulses per in. metric ranges: 5 ±0, pulses per mm 0 ±0, pulses per mm,5 ±0,5 pulses per mm 0,5 ±0,0 pulses per mm tel: 800..58 +.88.70.750 fax: +.88.70.799 PT950
Ordering Information (cont.): Electrical onnection: F order code: 6-pin plastic connector 5-ft. instrumentation cable WG, shielded 8-pin plastic connector 6-pin metal connector IP 67, NEM X*,6 IP 67, NEM 6 IP 65, NEM IP 67, NEM 6.0 in. [78 mm].5 in. [6 mm]. in. [60 mm].0.9 in. [8 0 mm] cable dia. 6 WG max conductor size connector: MS0E-S-6P mating plug: MS06E-S-6S 5 ft. x 0.-in. dia. [7,5 M x 5 mm dia.] WG, shielded.6.0 in. [6,6 7,6 mm] cable dia. 0 WG conductor size connector: onxall 8-8PG-00-K mating plug: onxall 8-8SG-6-K /8-in. [9 mm] max cable dia. 6 WG max conductor size connector: MS0E-S-6P mating plug: MS06E-S-6S 6-pin mating plug: 8-pin mating plug: 5-ft. instrumentation cable: TTL/MOS 5 V Line Driver pin Open ollector Universal Line Driver input voltage input voltage common common channel channel D channel channel E - channel ' F - channel ' TTL/MOS 5 V Line Driver pin Open ollector Universal Line Driver input voltage input voltage common common channel channel 6 channel channel 7 - - channel ' - channel ' 5 - ' TTL/MOS 5 V Line Driver color Open ollector Universal Line Driver red input voltage input voltage black common common green channel channel white channel channel blue - channel ' brown - channel ' yellow - orange - ' contact view D F E contact view 6 5 8 7 6 * applies to stainless steel enclosure only. VLS Option - Free Release Protection The patented elesco Velocity Limiting System (VLS) is an option for PT9000 Series cable extension transducers that limits cable retraction to a safe 0 to 55 inches per second for the single spring option and 0 to 80 inches per second for the higher tension dual spring option. The VLS option prevents the measuring cable from ever reaching a damaging velocity during an accidental free release. This option is ideal for mobile applications that require frequent cable disconnection and reconnection. It prevents expensive unscheduled downtime due to accidental cable mishandling or attachment failure. How To onfigure Model Number for VLS Option:. using guide below, select PT950 model. remove PT from the model number. add VLS. completed model number! VLS950 - english ranges metric ranges - - 0075 to 0550 0500 to 750 PT950-000--0 PT 950-000--0 VLS + 950-000--0 VLS950-000--0 0 R D E F = available options. tel: 800..58 +.88.70.750 fax: +.88.70.799 PT950
Fig. Outline Drawing (6 oz. cable tension only) 5.8 ±0.06 [,6 ±,5] 0.85 [,6] mounting hole detail 0.6 [6,] eyelet detail Ø.9 [,9]* Ø.75 [9,5]**.80 [,9].90 [,5].0 ±0.08 [7,9 ±,0] full extension 0.5 [6,] full retraction.5 ±0.08 [,8 ±,0] 5.6 [,] max. 0.7 [6,9].65 [,9]** MESURING LE RNGE Ø.0 in. Ø.0 in. Ø.07 in. Ø.06 in. 75 n/a 0. 0.9 0.7 00 n/a 0.9 0.9 0.9 50 n/a 0. 0.59 0.7 00 n/a 0.58 0.79 0.98 50 n/a 0.7 0.98. 00 n/a 0.88.8.7 50 n/a.0.8.7 00 n/a.7.57.96 50 n/a..77 n/a 500 n/a.6.97 n/a 550.6.6 n/a n/a.75 ±0.06 [0,7 ±,5] DIMENSION (INHES) 9.5 [0] max. DIMENSIONS RE IN INHES [MM] tolerances are 0.0 IN. [0.5 MM] unless otherwise noted. 5.0 [,6] * tolerance = +.005.00 [+..0] ** tolerance = +.005.005 [+..] version:.0 last updated: February, 06 tel: 800..58 +.88.70.750 fax: +.88.70.799 PT950 5