3Gb/s, HD, SD 16ch digital audio embedder with embedded domain audio shuffler, mixer and framesync A Synapse product COPYRIGHT 2018 AXON DIGITAL DESIGN BV ALL RIGHTS RESERVED NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM WITHOUT THE PERMISSION OF AXON DIGITAL DESIGN BV.
Block schematic & I/O panel Eq Eq 2x1 AUTO MUX AUTO PHASER FRAME SYNC ADJUSTABLE OFFSET DELAY 0-500ms S2020 INSERT 16CH EMB RAIL 1 RAIL 2 16 CHANNEL DE-EMBEDDER 16 CHANNEL DE-EMBEDDER 48 x 24 MUX 8x2 8 ch 2 ch AUDIO MIXER 16 ch 18 x 16 MUX 16 CHANNEL DELAY GAIN/ PHASE PLL µp REFERENCE INPUTS 1 2 INTERNAL SYNAPSE BUS RACK CONTROLLER BPH18D BPH18 BHX18D BHX18 3Gb/s, HD, SD SDI INPUT 1 (OPTIONAL FIBER INPUT) 3Gb/s, HD, SD SDI INPUT 2 (OPTIONAL FIBER INPUT) 3Gb/s, HD, SD SDI OUT 1 (OPTIONAL FIBER OUTPUT) 3Gb/s, HD, SD SDI OUT 2 (OPTIONAL FIBER OUTPUT) GPI AND METADATA (S2020) INPUT relay bypass relay bypass AES/EBU AUDIO INPUTS
Features The is an Embedder, shuffler, mixer and framesync with 8 AES/EBU digital audio inputs. 2 SDI inputs (with auto switch on carrier loss, and switch back function) 2 SDI outputs Compatible with the following input formats (auto selecting): 1080p/59.94 1080p/50 1080i/59.94 1080i/50 1080p/30 1080p25 1080p(sf)/23.98 1035i/59.94 720p/59.94 720p50 SD525 SD625 Offset video delay adjustable between 0 and 500ms Frame sync with output phase control in Frames, Lines and pixels with respect to reference. Delay setting are stored per output format for a constant latency operation. 30 frames delay offset per channel for 1080p and 1080i formats 60 frames delay offset per channel for 720p formats 125 frames delay offset per channel for SD formats 8 AES/EBU inputs with sample rate converter (available with 110 Ohm and 75 Ohm inputs) AES/EBU inputs accept synchronous streams like Dolby E and asynchronous up to 192kHz sampling via the built in Sample Rate Converters. Auto SRC-off for bitstream sources like Dolby E 16 channel audio shuffler 8 input 2 ch audio mixer Audio channel append and overwrite modes Audio level and phase control Audio offset delay up to 5000 ms Peak detection 0, -6, -12 and -18dBFS S2020 metadata insertion from an external source 7 presets that configure all I/O channels. controlled by GPI or ACP (Cortex) Locks to Trilevel, Bi-level syncs or SDI input Transparent for ATC time code RP188, RP196, RP215 Full control and status monitoring through the front panel of the frame and via the Ethernet port (ACP) Optional relay bypass (BHX18 or BHX18D) Applications Ingest embedding of digital audio with shuffle and mix function from asynchronous sources
Ordering information Module: : 3Gb/s, HD, SD 16ch digital audio embedder with embedded domain audio shuffler, mixer and framesync Standard I/O: BPH18_: I/O panel for with unbalanced audio in and outputs BPH18D_: I/O panel for with balanced audio in and outputs Relay bypass I/O: BHX18_: relay I/O panel for BHX18D_: relay I/O panel for
Specifications Serial Video Input Standard Number of Inputs Equalization Return Loss Serial Video Output Number of Outputs Signal Level DC Offset Rise/Fall Time Overshoot Return Loss Wideband Jitter SD,HD and 3Gb/s SDI: SMPTE 292M, SMPTE 259M, SMPTE424 2 BNC Typical maximum equalized length of Belden 1694A cable: 90m at 2.97Gb/s, 120m at 1.485Gb/s, and 250m at 270Mb/s > 15dB up to 1.5GHz 2 BNC 800mV nominal 0V ±0.5V 135ps nominal < 10% of amplitude > 15dB up to 1.5GHz (typ.) > 10dB up to 3GHz (typ.) < 0.2UI AES Input 25 pins female sub-d (balanced) or DIN1.0/2.3 coax (unbalanced) Standard AES-1992 for balanced synchronous or asynchronous PCM/AES, SMPTE 276M for single ended synchronous or asynchronous PCM/AES Number of Inputs 8 Sampling Rate 32 khz to 96 khz asynchronous 48 khz Synchronous (SRC=off) Resolution 24 bits Minimum Input/Output Delay 2 ms Impedance 110 Ohms or 75 Ohms Level 0.2V to 1V nom for Coax, 2V to 7V for balanced operation Reference Input through RRC Number of Inputs Tri-level Bi-level 2 on SFR18, 2 on SFR08 SMPTE274M, SMPTE296M 600 mvp-p nominal, 75 Ohms terminated through loop PAL Black Burst ITU624-4/SMPTE318, Composite NTSC SMPTE 170M 1Vp-p nominal, 75 Ohms terminated through loop Miscellaneous Weight Approx. 250g Operating Temperature 0 C to +50 C Dimensions 137 x 296 x 20 mm (HxLxD) Electrical Voltage +24V to +30V Power <15 Watts