THE ART OF ENGINEERING Functionality DPST Switch DPST Sensing Switch Transfer Switch Passive Splitter Ethernet Switch ASI 3G Switch or DA E/T Switch Optical Switch up to 006 MHz L-Band Broadband Ethernet ASI / SDI/HD / SDI/3G E/T Technical Data on Page Universal Switch Chassis RU The final product may vary from the above image depending on the options selected. Product: DEV 95 Universal Switch Chassis RU Modules: Module DEV -0005 X X 3 DEV -0009 X X 3 DEV -000 X X 4 DEV -00 X X 4 DEV -0024 X X 5 DEV -0027 X X 5 DEV -002 X X 6 DEV -0033 X X 6 DEV -0050 X X 3 DEV -0057 X X 5 DEV -005 X X 4 DEV -007 X X 4 DEV -00 X X 4 DEV 3-069 X X 7 DEV 3-070 X X 7 DEV 3-07 X X 7 DEV 3-074 X X 7 DEV 4-004 X X 7 DEV 4-007 X X DEV 4-00 X X DEV 4-009 X X DEV 4-0093 X X DEV 4-0095 X X DEV 4-002 X X DEV 4-00 X X 9 DEV 7462 X 9 DEV 7463 X 9
DEV 95 Technical Data DEV 95 Universal Switch Chassis RU Universal Switch Chassis R em ote Local A uto S im ultaneous Individual Power Supply Power Supply 2 Failure D E V 95 C h C h 2 W A R N IN G : D isconnect pow er before opening! 00...240 V 50...60 H z 40 V A Alarm DIG /In RS 232 Ethernet Channel Channel 2 Fuse 2 A T F use 2 A T Capacity Number of Slots 2 Remote Communication Interfaces (Connectors) Remote Control & Surveillance (Interface) Redundant Power Supply Supply Voltage Power Consumption Dry Contacts Alarm Connector Contact Load Summary Alarm Ethernet (RJ-45) Serial Interface RS 232 (Sub-D-9 (f)) Digital Interface (Sub-D-9 (m)) via Web Interface (Ethernet); via SNMP (Ethernet); via Sandar Prosan Protocol (Serial Interface); OR via Leitch Protocol (Ethernet/Telnet & Serial Interface); OR via QEC Protocol (Ethernet/Telnet & Serial Interface). 00 240 V AC supplied by two different Lines <40 VA Sub-D-9 (m) 60 V; 300 ma Via Remote Interface and via dry Contacts Two Stage Alarm Signalization for Power Line Failure: B-Alarm One Power Supply Unit is defective. A-Alarm All Power Supply Units are defective. General Specifications Size 9" (43 mm) Width, RU (44 mm) Height, 25 mm Depth Weight ~5 kg Environmental Conditions ETS 30009 Part -3 Class 3.E Option 22 Main Backup Swap In combination with sensing switch module(s) (or with ASI/SDI switch module(s)), this option enables the dynamic change of main and backup assignment of the primary input and the secondary input. I.e. the conditions for the autonomous switching from the secondary to the primary input are the same as for the (standard) autonomous switching from the primary to the secondary input. Option 2 Automatic Switch Back In combination with sensing switch module(s) (or ASI/SDI switch module(s)) this option enables the autonomous switch back from the secondary to the primary input based on the RF signal level information (on the digital signal quality, respectively) in combination with an adjustable hysteresis (for sensing switch modules) or an adjustable delay (for ASI/SDI switch modules). Option 37 TRAC With "Trap Receiver Action Controller" (TRAC), the device is able to perform switching actions based on industry standard SNMP traps received from any external equipment without additional M&C software. In addition, the IP Monitoring functionality checks permanently the availability of external equipment used in any TRAC configuration. The device is able to command itself and other equipment via SNMP. THE ART OF ENGINEERING 2/0
DEV 95 DEV -0005 DPST Switch Module with Monitor Port; 47...006 MHz; 75 Ohm, BNC (f) M onitor 47...006 MHz Number of Inputs / Outputs 2 / + Monitor Port 75 Ohm, BNC (f) Damage Level +30 dbm selected Path >23 db @ 70 MHz > db @ 40 MHz >4 db @ 700 MHz, typical 6 db not selected Path >23 db @ 70 MHz > db @ 40 MHz >4 db @ 700 MHz, typical 6 db <2 db >0 db @ 40 MHz >55 db @ 700 MHz >50 db @ 000 MHz Failsafe Switching Cycles >0E6 Monitor Port Impedance, Connector 75 Ohm, BNC (f) > db = Output Level - 20±3 db DEV -0009 DEV -0050 DPST Switch Module; DC 2500 MHz; 50 Ohm, N (f) DPST Switch Module, DC 2500 MHz, 50 Ohm, SMA (f) Damage Level selected Path not selected Path Contact Rating Switching Cycles DC 2500 MHz DEV -0009: 50 Ohm, N (f) DEV -0050: 50 Ohm, SMA (f) +30 dbm >4 db, typical 6 db >4 db, typical 6 db <2 db >60 db (up to 006 MHz) >40 db (006 2500 MHz) 2 V DC, 250 ma >0E6 (no DC) >0E5 (2 V DC, 250 ma) 3/0 THE ART OF ENGINEERING
DEV 95 DEV -000 DEV -00 DEV -005 DEV -007 DEV -00 DPST Sensing Switch Module; DC, 950 250 MHz; 75 Ohm, F (f) DPST Sensing Switch Module; DC, 47 006 MHz; 75 Ohm, F (f) DPST Sensing Switch Module; DC, 950 250 MHz; 50 Ohm, SMA (f) DPST High Power Sensing Switch Module; DC, 950 250 MHz; 75 Ohm, F (f) DPST High Power Sensing Switch Module; DC, 47 006 MHz; 75 Ohm, F (f) E xternal C ontroller DEV -00, DEV -00: DC, 47 006 MHz DEV -000, DEV -005, DEV -007: DC, 950 250 MHz DEV -005: 50 Ohm, SMA (f) DEV -000, DEV -00, DEV -007, and DEV -00: 75 Ohm, precision F (f) Damage Level DEV -00: +0 dbm DEV -000, DEV -005: +5 dbm DEV -007, DEV -00: +40 dbm Nominal Input Level 0 dbm selected Path >4 db, typical 6 db not selected Path >4 db, typical 6 db DEV -005: <2.5 db DEV -000, DEV -00, DEV -007, and DEV -00: <2 db DEV -00: >55 db DEV -005, DEV -000, DEV -007, DEV -00: >45 db Flatness 0.5 db (over entire Band) 0.3 db (in any 36 MHz Interval (DEV -000, DEV -005, DEV -007)) 0.2 db (in any MHz Interval (DEV -00, DEV -00)) Switching Cycles >0E6 (no DC) RF Sensing Adjustable Threshold Level DEV -000: 0 dbm > Threshold Level > -50 dbm DEV -00, DEV -005: 0 dbm > Threshold Level > -60 dbm DEV -007: +30 dbm > Threshold Level > -0 dbm DEV -00: +20 dbm > Threshold Level > -0 dbm Threshold Level Accuracy ±3 db Threshold Repeatability <0.5 db THE ART OF ENGINEERING 4/0
DEV 95 DEV -0024 DPST Relay Switch Module with Termination; DC GHz; 50 Ohm, SMA (f) Input Level selected Path not selected Path Contact Rating Switching Cycles DC GHz 50 Ohm, SMA (f) <+30 dbm >4 db, typical 6 db >4 db, typical 6 db <0.5 db >60 db 2 V DC, 250 ma >0E6 (no DC) >0E5 (2 V DC, 250 ma) DEV -0027 DEV -0057 Relay Transfer Switch Module; DC GHz; 50 Ohm, SMA (f) Transfer Switch Module; DC 006 MHz; 75 Ohm, BNC (f) A B DEV -0057: DC 006 MHz DEV -0027: DC GHz Number of Inputs / Outputs 2 / 2 DEV -0027: 50 Ohm, SMA (f) DEV -0057: 75 Ohm, BNC (f) Input Level <+30 dbm ( Out A, Out B) DEV -0027: >4 db, typical 6 db DEV -0057: > db >4 db, typical 6 db ( Out B, Out A) DEV -0027: <0.5 db DEV -0057: < db DEV -0027: >60 db DEV -0057: >40 db DEV -0027: DEV -0057: Failsafe Contact Rating DEV -0027: 2 V DC, 250 ma Switching Cycles DEV -0027: >0E6 (no DC) >0E5 (2 V DC, 250 ma) DEV -0057: >0E6 5/0 THE ART OF ENGINEERING
DEV 95 DEV -002 DPST Switch Module; DC, 47 2500 MHz; 75 Ohm, F (f) DC, 47 2500 MHz 75 Ohm, precision F (f) Damage Level +5 dbm Nominal Input Level 0 dbm selected Path >6 db (DC 2300 MHz) >3 db (2300 2500 MHz) not selected Path >4 db (47 2300 MHz) >0 db (2300 2500 MHz) <.2 db (DC...006 MHz) <.5 db (950...250 MHz) <. db (250...2500 MHz) >40 db Flatness ±0. db (over entire Band) ±0.5 db (47 006 MHz) ±0.3 db (950...250 MHz) Contact Rating 60 V DC, 00 ma Switching Cycles >0E6 DEV -0033 DPST Relay Switch Module; DC GHz; 50 Ohm, SMA (f) Input Level Contact Rating Switching Cycles DC GHz 50 Ohm, SMA (f) <+30 dbm >4 db, typical 6 db (selected Path & not selected Path) <0.5 db >60 db 2 V DC, 250 ma >0E6 (no DC) >0E5 (2 V DC, 250 ma) THE ART OF ENGINEERING 6/0
DEV 95 DEV 3-069 DEV 3-070 DEV 3-07 C om :4/4: Splitter/Combiner Module, Passive; 47 006 MHz; 75 Ohm, F (f) :4/4: Splitter/Combiner Module, Passive; 950 250 MHz; 75 Ohm, F (f) :4/4: Splitter/Combiner Module, Passive; 950 250 MHz; 50 Ohm, SMA (f) P ort P ort 2 P ort 3 P ort 4 3-069: 47 006 MHz 3-070, 3-07: 950 250 MHz 3-07: 50 Ohm, SMA (f) 3-069,3-070: 75 Ohm, precision F (f) >4 db, typical db 7.5± db Flatness ±0.25 db (within any 36 MHz Interval) Isolation >20 db, typical 25 db DC blocked Yes DEV 3-074 C om :2/2: Splitter/Combiner Module, Passive; 950 250 MHz; 75 Ohm, F (f) P ort P ort 2 Flatness Isolation DC blocked 950 250 MHz 75 Ohm, precision F (f) >6 db, typical db 4± db ±0.2 db (within any 36 MHz Interval) >22 db, typical 25 db Yes DEV 4-004 Ethernet 2:/:2 Switch Module : Patch Cable : Patch Cable : Patch Cable Specifications Transmission Rate Connectors Max. 00 MBit/s RJ-45 7/0 THE ART OF ENGINEERING
DEV 95 DEV 4-007 DPST Switch Module with DA :3; ASI; 75 Ohm, BNC (f) DEV 4-00 DPST Switch Module with DA :3; ASI / HD-SDI; 75 Ohm, BNC (f) DEV 4-009 Distribution Amplifier :3; ASI; 75 Ohm, BNC (f) DEV 4-0093 DPST Switch Module with DA :3; ASI / 3G-SDI; 75 Ohm, BNC (f) DEV 4-0095 Distribution Amplifier :3; ASI / 3G-SDI; 75 Ohm, BNC (f) DEV 4-002 Distribution Amplifier :3; ASI / HD-SDI; 75 Ohm, BNC (f) DPST switch module Distribution amplifier 0 0 0 0 In,2 CD CD 2,2 2 3 CD 2 2 E xternal C ontroller Pos 0: without electrical power Pos : with electrical power selected Pos 2: with electrical power selected (state shown here) E xternal C ontroller Pos 0: without electrical power Pos : with electrical power (state shown here) The DEV 4-007 is the successor of the DEV 4-000 and can be used as direct replacement. The DEV 4-009, the DEV 4-002, and the DEV 4-0095 are equivalent to a DEV 4-007, to a DEV 4-00, or to a DEV 4-0093, but without switching functionality i.e. the distribution modules provide a single input, only (meaning that "" is not available). Specifications Signal Type 4-007, 4-009: ASI; 0. V 4-00, 4-002: SD-SDI (SMPTE 259M) / HD-SDI (SMPTE 292M); 0. V 4-0093, 4-0095: 3G-SDI (SMPTE 424M); 0. V Transmission Rate 4-007, 4-009: ASI 4-00, 4-002: ASI / SD-SDI / HD-SDI 4-0093, 4-0095: ASI / SD-SDI / HD-SDI / 3G-SDI Number of Inputs / Outputs 4-009, 4-002, 4-0095: / 3 4-007, 4-00, 4-0093: 2 / 3 75 Ohm, BNC (f) Input Level 300 00 mv Output Level >600 mv >50 db Failsafe (DEV 4-007, DEV 4-00, and DEV 4-0093, only) Switching Cycles >0E6 (DEV 4-007, DEV 4-00, and DEV 4-0093, only) Automatic Switching Capability based on Signal Status (DEV 4-007, DEV 4-00, and DEV 4-0093) Note : DEV 4-00, DEV 4-0093, DEV 4-0095, and DEV 4-002 deliver an inverted ASI signal on output port (Out ) THE ART OF ENGINEERING /0
DEV 95 DEV 4-00 DPST Switch Module with DA :3; E/T; 75 Ohm, BNC (f) 0 0,2 CD CD 2 S w itch,2 2 3 E xternal C ontroller Pos 0: without electrical power P os : w ith electrical pow er selected P os 2: w ith electrical pow er selected Specifications Signal Type E or T Number of Inputs / Outputs 2 / 3 75 Ohm, BNC (f) Input Level 2.37 V (nominal) Output Level 2.3 2.60 V, typical 2.37 V >6 db, typical db >50 db DC blocked No DEV 7462 DEV 7463 :2 Optribution Switch; 260...360 nm, 50...60 nm; SC/APC :2 Optribution Switch; 260...60 nm; SC/APC Optical Switch Optical Fiber Optical Fiber A C om Optical Fiber B E xternal C ontroller The DEV 7462 and the DEV 7463 are optical switch modules for the selection of optical signals. For application in the DEV 95, the optical switch modules are to be ordered with Option 95. Optical Specifications Number of optical Inputs Number of optical Outputs 2 Wavelength DEV 7462: 260 360 nm & 50 60 nm DEV 7463: 260 60 nm Optical Connectors (Options) SC/APC (Option 07: FC/APC, Option 0: E2000 HRL) Optical <.5 db Isolation in/out >55 db Maximum operational optical Power 500 mw / 27 dbm Switching Type Switching Time 3 ms (typical) 9/0 THE ART OF ENGINEERING
DEV 95 Order Information Product DEV 95 Options: Option 22 Option 2 Option 37 Option 79 Option Modules DEV -0005 DEV -0009 DEV -000 DEV -00 DEV -0024 DEV -0027 DEV -002 DEV -0033 DEV -0050 DEV -0057 DEV -005 DEV -007 DEV -00 DEV 3-069 DEV 3-070 DEV 3-07 DEV 3-074 DEV 4-004 DEV 4-007 DEV 4-00 DEV 4-009 DEV 4-0093 DEV 4-0095 DEV 4-002 DEV 4-00 Universal Switch Chassis RU Main Backup Swap Automatic Switch Back TRAC Additional Web License RU Blind Plate (to cover an empty Slot) DPST Switch Module with Monitor Port; 47...006 MHz; 75 Ohm, BNC (f) DPST Switch Module; DC 2500 MHz; 50 Ohm, N (f) DPST Sensing Switch Module; DC, 950 250 MHz; 75 Ohm, F (f) DPST Sensing Switch Module; DC, 47...006 MHz; 75 Ohm, F (f) DPST Relay Switch Module with Termination; DC GHz; 50 Ohm, SMA (f) Relay Transfer Switch Module; DC GHz; 50 Ohm, SMA (f) DPST Switch Module; DC, 47 2500 MHz; 75 Ohm, F (f) DPST Relay Switch Module; DC GHz; 50 Ohm, SMA (f) DPST Switch Module; DC 2500 MHz; 50 Ohm, SMA (f) Transfer Switch Module; DC 006 MHz; 75 Ohm, BNC (f) DPST Sensing Switch Module; DC, 950 250 MHz; 50 Ohm, SMA (f) DPST High Power Sensing Switch Module; DC, 950 250 MHz; 75 Ohm, F (f) DPST High Power Sensing Switch Module; DC, 47 006 MHz; 75 Ohm, F (f) :4/4: Splitter/Combiner Module, Passive; 47 006 MHz; 75 Ohm, F (f) :4/4: Splitter/Combiner Module, Passive; 950 250 MHz; 75 Ohm, F (f) :4/4: Splitter/Combiner Module, Passive; 950 250 MHz; 50 Ohm, SMA (f) :2/2: Splitter/Combiner Module, Passive; 950 250 MHz; 75 Ohm, F (f) Ethernet 2:/:2 Switch Module DPST Switch Module with DA :3; ASI; 75 Ohm, BNC (f) DPST Switch Module with DA :3; ASI / HD-SDI; 75 Ohm, BNC (f) Distribution Amplifier :3; ASI; 75 Ohm, BNC (f) DPST Switch Module with DA :3; ASI / 3G-SDI; 75 Ohm, BNC (f) Distribution Amplifier :3; ASI / 3G-SDI; 75 Ohm, BNC (f) Distribution Amplifier :3; ASI / HD-SDI; 75 Ohm, BNC (f) DPST Switch Module with DA :3; E/T; 75 Ohm, BNC (f) Optical Switch Modules DEV 7462 :2 Optribution Switch; 260...360 nm, 50...60 nm; SC/APC DEV 7463 :2 Optribution Switch; 260...60 nm; SC/APC Options for Optical Switch Modules Option 07 FC/APC optical Connector Option 0 E2000/HRL optical Connector Option 95 Front Panel for DEV 95 Contact DEV Systemtechnik GmbH Grüner Weg 4A 669 Friedberg GERMANY Phone: +49 603 6975 00 Fax: +49 603 6975 4 info@dev-systemtechnik.com www.dev-systemtechnik.com THE ART OF ENGINEERING Rev. 7-Jan-20 Technical specifications are subject to change 0/0