USE AND CARE GUIDE CAMERA KIT Black & White Plastic Casing Camera Kit Before operating the unit, please read this manual thoroughly and retain it for future reference.
WARNING WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. FOR SERVICING REFER TO QUALIFIED SERVICE PROFESSIONAL Explanation of Graphical Symbols This symbol is intended to alert the user the presence of uninsulated, dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS-All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS-The safety and operating instructions should be retained for future reference. 3. CLEANING-Unplug this television from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. ATTACHMENTS-Do not use attachments not recommended by the television equipment manufacturer as they may result in the risk of fire, electric shock or injury to persons. 5. WATER AND MOISTURE-Do not use this television equipment near water-for example, near a bathtub,washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or the lake. 6. ACCESSORIES-Do not place this television equipment on an unstable cart, stand or table. The television equipment may fall, causing serious injury to a child or adult, and serious damage to the equipment. Wall or shell mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturer. 6A. Television equipment and cart combinations should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the equipment and cart combination to overturn. 7. VENTILATION-Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to ensure reliable operation of the television equipment and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the television equipment on a bed,sofa, rug. or other similar surface. This television equipment should never be placed near or over a radiator or heal register. This television equipment receiver should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided. 8. POWER SOURCES-This television equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home. consult your television dealer of local power company. For television equipment designed to operate from battery power refer to the operating instructions. 9. GROUNDING OR POLARIZATION-This television equipment is provided with a polarized alternating-current line plug(a plug having one blade wider then the other). The plug will fit into the power outlet only one way. This is a safety feature. If you, are unable to Insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
IMPORTANT SAFEGUARDS 10. POWER CORDS-Do not allow anything to rest on the power cord. 11. HEED WARNINGS-Follow all instructions marked on the television equipment. 12. LIGHTNING-For added protection for this television equipment during a lighting storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges. 13. OVERLOADING-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 14. OBJECT AND LIQUID ENTRY-Never push objects of any kind into television equipment through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 15. SERVICING-Do not attempt to service this television equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 16. DAMAGE REQUIRING SERVICE-Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power supply cord or the plug has been damaged. B. If liquid has been spilled,or objects have fallen into the video product. C. If the video product has been exposed to rain or water. D. If the video product does not operate normally by following the operating instructions, adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls. may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation. E. If the video product has been dropped, or the cabinet damaged. F. When the video product exhibits a distinct change in performance - this indicates a need for service. 17. REPLACEMENT PARTS-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 18. SAFETY CHECK-Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition. SAVE THESE INSTRUCTIONS.
FCC CLASS B NOTICE NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates. Uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to witch the receiver is connected. Consult the dealer or an experienced radio or television technician for help.
FCC CLASS B NOTICE The users manual or instruction manual for an intentional or unintentional radiator shall caution the used that changes or modifications not expressly approved by the party responsible for compliance could void the user'authority to operate the equipment. CERTIFICATION: This unit complies with DHHS rules 2 cfr subchapter J and FCC rules 47 cfr part is applicable at date of manufacture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN. WARNING:TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
TABLE OF CONTENTS page Introduction... 3 Features... 3 System Contents... 3 Precautions Before Installing or Using the Camera with System Procedures... 4 Testing the Camera... 4 Installation... 5 Description of Controls & Operation... 6 Wiring Diagrams... 7 Trouble Shooting Guide... 8 Technical Specifications... 9 Accessories... 10-11 Care & Maintenance... 12
This camera kit is compatible with all B/W video surveillance systems and will give you added security and comfort for many years. It is easy to install in almost anywhere you need audio/video surveillance. To safely use all the features of this system, please read the installation and operating instruction in this manual, and keep it for future reference. FEATURES High resolution image sensor and wide angle lens are ideal for all purpose video surveillance Improved durability and shock resistance Infrared illuminators provide some Night vision Microphone and speaker built-in Inputs permit camera interface with alarm system motion sensors, contact switches, etc Plug n Play connections for easy Do it yourself installation Auto-iris lens compensates for changing light conditions Supplied with mounting bracket and 65 of cable System Contents Before proceeding, unpack the CA 1203 Security Camera and check that all of the following components are present, and appear undamaged. (1) 20 meter cable (2) Camera (3) Mounting bracket for camera (4) 3 self-tapping screws (5) Clip Type Equip INTRODUCTION 3
PRECAUTIONS BEFORE INSTALLING OR USING THE CAMERA WITH SYSTEM Precautions Read the following precautions before installing or using the system 1. Choose an ideal location for the camera so that the lens won t be exposed to any direct light source. The camera unit must be protected against moisture and vibration. 2. When you connect the camera to the monitor, the monitor should only be operated with the correct power source indicated on the specification. 3. Check the system for operation prior to installing the unit. 4. Be extra careful not to scratch the camera lens. Testing the Camera Testing the camera for proper operation and good viewing location is recommended prior to drilling and installing. To test the camera set aside all packaging, then follow these steps: 1. Loosen both ends of the wrapped cable. 2. Insert one end of the cable into the camera. Hold the cable end firmly, align the connector so that The arrow is visible on top. Push firmly until the connection is secured. Note: Both ends of the cable are identical; there is no wrong end. The round 6 pin connector On the camera is located at the back and is the only connector that it will fit into. 3. Insert the other end into the cable monitor of the OS 1203 system in the same manner. There are connections at the rear of the monitor for four cameras. The cable must be inserted into the first available connector. Note: Monitor connectors are numbered internally from left to right. Facing the back of the monitor, a camera installed at the first connector will be Camera One. If no camera is installed as Camera One, the Camera Two connector will not activate. If only one camera is installed, and it is connected at any port other than Camera One, the monitor screen will be static. 4. If the monitor is not already powered on, turn on all power switches to view the camera image. 5. Use the camera select button on the front panel of the monitor to view image from newly connected camera. 6. The monitor screen should display the installed camera view. The camera position can now be adjusted for best view 4
INSTALLATION Permanent installation using pedestal stand. 1. Attach the Pedestal using 3 screws. 2. Attach the Camera onto the Pedestal and tighten the thumb screw. Temporary installation using Clamp Method. 1. Attach the Camera to the Clamp and tighten the thumb screw. 2. Clamp onto the designated location and make sure it has a firm hold. How to install Cameras Keep Camera installed away from direct sunlight. Also avoid places where humidity is high or unable to protect rain. The mounting bracket must be attached to a structural object such as a wall stud or ceiling rafter using suitable fastener. 5
DESCRIPTION OF CONTROLS & OPERATION 1 2 3 4 1. CCD CAMERA LENS Delivers sharp image to the CCD sensor. 2. INFRARED L.E.D. Illuminates area for better picture. 3. MICROPHONE Picks up sound around the camera. Front View 4. MONITOR INPUT JACK Connect to cable the monitor. B+GND IN 5 6 5. SPEAKER Deliver the sound from the monitor. 6. SENSOR INPUTS +B GND IN a b c d a = +B : This terminal is +12V DC output for the sensor b = GND : This terminal is a ground output for the sensor c/d = Sensor In : These terminals are for the trigger input and are connect ( ) NO(Normally open) type sensor output. Rear View 6
WIRING DIAGRAMS WIRING Connections CAMERA2 CAMERA3 MONITOR CAMERA1 CABLE REMOTE CABLE CAMERA4 CABLE CABLE SENSOR IN OUT PUT 1 2 3 4 NOTE: Do not use RCA jack to connect any cameras. 7
TROUBLE SHOOTING GUIDE Before calling for service, please use the following guide for possible solutions: Problem Cause Camera Check that the monitor is plugged in No Picture Review the Power Switch section and ensure that both switches are Turned on Check that the cable connection at the monitor and cameras are firmly in place Check that the monitor is set to receiver a channel that has a camera installed Picture, but no sound Buzzer sounds repeatedly Check the volume control on the monitor Check that nothing is impeding the microphone at the camera location Check that there is an alarm sensor device connected to the camera If no alarm sensor devices are connected, check the alarm button is in the OFF position on the front panel of the monitor 8
TECHNICAL SPECIFICATIONS Camera TV system Image sensor Effective picture elements Horizontal drive frequency Vertical drive frequency Video output Audio output Black & White EIA 1/3" CCD Vertical:492 x Horizontal:512 - EIA 15.75 KHz 60 Hz 1V p-p 75 ohm 200 mv Iris, automatic control by electronic system Sensor input Angle picture Lens Power requirements Minimum light illuminance Operating temperature Dimensions 4 PIN terminals Horizontal 74 Vertical 55 F2.0 12V 200mA, Maximum 2.4W 0.1 Lux -10 C ~ +50 C (14 F ~ 122 F) 80 (W) X 50 (D) X 80 (H) mm 9
ACCESSORIES Standard Accessories Screws 6P Cable(20m) Pedestal stand Clip Type Equip 10
ACCESSORIES Optional Accessories 6P Cable (EXE 1001) Housing (CH 1001) Housing (CS 1001) 11
CARE AND MAINTENANCE Your video observation system is an example of superior craftsmanship. Following these precautions will give you many years of solid performance and enjoyment. Keep your monitor & camera dry. If it does wet, wipe it dry immediately. Use and store your unit in normal temperature environment. Extreme temperatures can shorten the life of electronic devices. Handle the monitor carefully. Dropping it can cause serious damage to the unit. Occasionally, clean the unit with a damp cloth to keep it looking new, Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the unit. Keep the unit away from excessive dirt and dust. These can cause premature wear of parts. Note : All specifications subject to change without notice. E & OE. 12
WARRANTY Home Sentinel warrants this home security product ("The Product") to be free from defects in material and workmanship for a period of one year from date of purchase. This warranty does not cover any expenses incurred in the removal and reinstallation of the product. This warranty is offered to the original purchaser of the product only. If the product should prove defective within the warranty period, return the product postage prepaid to Home Sentinel, along with your dated sales slip or other proof of purchase which will establish your eligibility for the warranty. Home Sentinel will at its option, replace or repair the product free of charge and return the product to you postage prepaid. This warranty does not apply to the product which has been damaged, misused, altered or repaired by anyone other than a Home Sentinel authorized service facility. ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE, AND NO PERSON IS AUTHORIZED TO ASSUME FOR HOME SENTINEL ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT. HOME SENTINEL EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. THE REMEDIES PROVIDED UNDER THIS WARRANTY ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to provinces Some states/provinces do not allow limitation on how long warranty lasts, so the above limitation may not apply to you. Additionally, some states/provinces do not allow the exclusion of limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.