AUDIO AND VIDEO 20 21 22 23 24 25 26 FM Radio Trainer Dish Receiver Trainer LCD Television Trainer with Student Examination S/W LCD TV Trainer Dish Receiver Trainer with Television Combined Trainer of dish receiver and LCD TV Combined rainer of dish receiver and LCD TV with Student Examination S/W
02101 FM RADIO TRAINER MNT 02201 DISH RECEIVER TRAINER This educational trainer is designed to train students on dish receiver devices and their related circuits and faults. This educational trainer that is designed to train students on the FM radio; its circuits and related faults. The unit is modified to train the students on FM radio circuits, modulator circuits, antenna reception circuits, sound circuits, ring tone generator and all other important parts of a radio. The unit has many test points to study the signals at different stages of radio circuits. The unit is supported with a colored and detailed diagram indicating the different stages of radio circuits and the shapes of different signals. The unit is supplied with a faults panel to simulate faults at the reception of transmission and sound. The unit is kept inside an aluminum case for easier mobility MNT 05102 101 40 Cm x 40 Cm x 50 Cm Operation Manual in both Arabic and English Language with a full and detailed explanation of the device and how to operate it. Connection Cable, 2 mm Connection Cable E-Content for Trainer of Radio The device is modified to train the students on the dish receiver circuits, audio and circuits, audio inputs and outputs and all the other parts that exist in a dish receiver system. The device has many test points to study different signals through the experiment and at different stages of receiving transmission sent by satellites. The device is supported with a colored detailed diagram indicating the different stages of circuits of dish receivers and the shapes of signal at the input/output of each stage. The device is supported with a faults panel to simulate the faults at receiving the signals and forming of sound and picture. The device is kept inside a light aluminum case for easy mobility. Operation Manual in both Arabic and English Language with a full and detailed explanation of the device and how to operate it. Connection Cable, 2 mm Connection Cable E-Content for Trainer of Receiver Device 40 Cm x 40 Cm x 50 Cm Educational device for training on radio faults. Test points to study signals at different stages. ring circuits. Faults panel simulating common faults. Aluminium case for easier mobility. Training device on faults of the dish receiver. Different test points to study the different signals. Faults panel to simulates the common faults in dish receivers. Light aluminum case for easy mobility. The device needs a TV to display the audio/visual product (Not supplied with the unit). The device needs a dish to be installed on the top of the building to receive the signal (Not supplied with unit). 20 21
02202 LCD TV TRAINER WITH STUDENT EXAMINATION S/W MNT 02203 LCD TV TRAINER This educational trainer is designed to train students on the maintenance of color LCD TV; its different circuits and faults. This educational trainer is designed to train students on the maintenance of color TV; its different circuits and faults. SOME SIMULATED FAULTS Main board control circuits faults with all types VIP, RF circuits faults Power circuits faults Keyboard faults Video inputs/outputs faults Audio circuits faults Audio Fining circuits faults Receiver circuits faults Remote control faults Cover for the equipment Screen Holder fitted on the unit MNT 06108 Connection Cable, 4 mm Connection Cable, 2 mm MNT 05102 101 E-Content for Trainer of LCD Modern TV that works on all systems. More than 20 simulated faults. Different test points for studying different signals. Electronic screen on which the fault is displayed. Chassis for easy mobility. This trainer uses a real TV that is modern and manufactured recently using the latest technology. The trainer handles many practical topics like audio and circuits, receiving electronic circuits, screen circuits. The unit simulates more than 20 faults. The unit has many testing and measuring points like the digital control signals, inputs and outputs of the device, operation switches, remote control, sound fining and picture quality etc. The unit is supported with a colored detailed diagram indicating the different stages of forming the sound and picture and the shape of different signals at each stage. The unit is supplied with a small electronic screen through which faults are displayed The electronic screen acts as a guide for the instructor supplying information on each fault. The unit is fitted to an electrostatically painted steel chassis with 4 wheels for easy mobility. The unit could be controlled and entered in a faulty state through the faults panel or the program that is loaded on the touch screen attached to the unit. Performance of trainees is evaluated through a testing program covering different levels. 70 Cm x 60 Cm x 100 Cm 2 The trainer uses a real TV that is modern and manufactured recently with the latest technology. The trainer handles many practical topics like audio and circuits, receiving electronic circuits, screen circuits.. etc. The unit simulates more than 20 faults. The unit has many testing and measuring points including the digital control signals, inputs and outputs of the device, operation switches, remote control, sound fining and picture quality..etc. The device is supported with a colored detailed diagram indicating the different stages of forming the sound and picture and the shape of different signals at each stage. The unit is supplied with a small electronic screen through which faults are displayed. The electronic screen acts as a guide for the instructor providing information on each fault. The unit is fitted to an electrostatically painted steel chassis with 4 wheels for easy mobility. Operation Manual in both Arabic and English Language with a full and detailed explanation of the device and how to operate it. Screen Holder fitted on the unit Connection Cable, 2 mm Connection Cable E-Content for Trainer of LCD Modern TV that works on all systems. More than 20 simulated faults. Different test points for studying of different signals. Electronic screen on which the fault is displayed. Chassis for easy mobility. Main board control circuits faults with all types VIP RF circuits faults Power circuits faults Keyboard faults Video inputs/outputs faults Audio circuits faults Audio Fining circuits faults Receiver circuits faults Remote control faults 70 Cm x 60 Cm x 100 Cm 2 22 23
02204 DISH RECEIVER TRAINER WITH TELEVISION MNT 02205 COMBINED TRAINER OF DISH RECEIVER AND LCD TV This educational trainer is designed to train students on the dish receiver device and its related circuits and faults. The device is modified to train the students on the dish receiver circuits, audio and circuits, audio inputs and outputs and all the other parts that exist in a dish receiver device. The device has many test points to study different signals through the experiment and at different stages of receiving the transmission sent by satellites. The device is supported with a colored detailed diagram indicating the different stages of circuits of dish receivers and the shapes of signal at the input/ output of each stage. vvv The device is fitted to an electrostatically painted iron chassis with a plastic handle to be easier to mount on a table. 50 Cm x 40 Cm x 40 Cm Training device on faults of the dish receiver. Different test points to study the different signals. Faults panel that simulates the common faults of dish receivers. The device needs a dish to be installed on the top of the building to receive the signal (Not supplied with unit). Operation Manual in both Arabic and English Language with a full and detailed explanation of the device and how to operate it. Connection Cable, 2 mm Connection Cable This educational trainer is designed to train students on understanding the theory of operation and handling the faults of dish receivers and LCD televisions. The trainer combines both units and teaches faults in each individual unit or combined faults. The unit has many test points to study different signals. The unit has a special part of training on the faults of the LCD television and its different circuits. The unit is modified to train the students on the common faults of TVs. The unit is supported with a small electronic screen through which faults are being described. The electronic screen acts as a guide for the instructor to display the fault related information (Control circuit faults, remote control faults, input and output faults etc) The device is fitted to an electrostatically painted steel chassis with 4 wheels for easy mobility. There is a satellite dish that is attached to the trainer to train he student on how to adjust transmission, get the finest picture on the TV screen and measure the strength and quality of reception. Operation Manual in both Arabic and English Language with a full and detailed explanation of the device and how to operate it. Training device on faults of dish receivers and LCD televisions. Various faults simulating the common faults of both devices. Different test points to study the signals of both devices. Satellite transmission dish is attached to the device to teach students how to adjust the transmission and measure signal quality and strength. An electrostatically painted steel chassis with 4 wheels for easy mobility. Connection Cable, 2 mm Connection Cable E-Content for Trainer of LCD Device 170 Cm x 80 Cm x 150 Cm 150 Kg 24 25
02506 COMBINED TRAINER OF DISH RECEIVER AND LCD TV WITH STUDENT EXAMINATION S/W This educational trainer is designed to train students on handling the faults of dish receivers and LCD televisions. The trainer combines both devices with their connections (Student can target faults of either device alone or faults of the connection between the two devices) The unit has many test points to study different signals. The unit has a special part of training on the faults of LCD television and its different circuits. The unit is modified to train the students on the common faults of TVs. The unit is supported with a small electronic screen to display fault related information. The electronic screen acts as a guide for the instructor to supply fault related information (control circuit faults, remote control faults, inputs and outputs faults etc) The unit is fitted to an electrostatically painted steel chassis with 4 wheels for easy mobility. There is a satellite dish that is attached to the unit to train the student on how to adjust transmission, get the finest picture on the TV screen and measure the strength and quality of reception. The device could be controlled and entered in a faulty state through the control panel or the program that is supplied. The program also includes tests to evaluate the students performance at different levels MNT 06108 170 Cm x 80 Cm x 150 Cm 150 Kg Cover for the equipment Connection Cable, 4 mm Connection Cable, 2 mm E-Content for Trainer of LCD Device WWW.BEDOEG.COM MORE THAN EXPECTED Training device on faults of the dish receiver and LCD television. Various faults simulating the common faults of both devices. Different test points to study the signals of both devices. Satellite transmission dish is attached to the device to teach students how to adjust the transmission and measure its strength. An electrostatically painted steel chassis with 4 wheels for easy mobility. Program for evaluation of students. We long to see educational technologies improve the learning opportunities and lives of BEDO all people.to enhance the learning experience of engineering and vocational education by innovating education ensuring seamless integration of technology into the curriculum and fostering acquisition of 21st century skills, thus preparing students for job placement or further education leading to successful employment. 26