v1.117 HMC326MS8G / 326MS8GE AMPLIFIER, 3. - 4. GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional Diagram Features Psat Output Power: +26 dbm > 4% PAE Output IP3: +36 dbm High Gain: 21 db Vs: +V Electrical Specifications, T A = +2 C, Vs = V, Vpd = V Ultra Small Package: MSOP8G General Description The HMC326MS8G & HMC326MS8GE are high efficiency GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC driver amplifiers which operate between 3. and 4. GHz. The amplifier is packaged in a low cost, surface mount 8 leaded package with an exposed base for improved RF and thermal performance. The amplifier provides 21 db of gain and +26 dbm of saturated power from a +V supply voltage. Power down capability is available to conserve current consumption when the amplifier is not in use. Internal circuit matching was optimized to provide greater than 4% PAE. Parameter Min. Typ. Max. Units Frequency Range 3. - 4. GHz Gain 18 21 db Gain Variation Over Temperature.2.3 db / C Input Return Loss 12 db Output Return Loss 7 db Output Power for 1dB Compression (P1dB) 21 23. dbm Saturated Output Power (Psat) 26 dbm Output Third Order Intercept (IP3) 32 36 dbm Noise Figure db Supply Current (Icc) Vpd = V 1 ua Supply Current (Icc) Vpd = V 11 13 16 ma Control Current (Ipd) 7 ma Switching Speed ton/toff 1 ns 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 781-329-47 Order online at www.analog.com Application Support: Phone: 1-8-ANALOG-D
v1.117 AMPLIFIER, 3. - 4. GHz Broadband Gain & Return Loss 2 Gain vs. Temperature 2 RESPONSE (db) 2 1 1 - -1-1 -2 2 2. 3 3. 4 4.. 6 P1dB vs. Temperature OUTPUT P1dB (dbm) 3 28 26 24 22 S21 S11 S22 2 Output IP3 vs. Temperature 4 GAIN (db) 23 21 19 17 1 Psat vs. Temperature Psat (dbm) 3 28 26 24 22 2 Power Compression @ 3. GHz 4 IP3 (dbm) 38 36 34 32 Pout (dbm), Gain (db), PAE (%) 4 3 3 2 2 1 1 Output Power (dbm) Gain (db) PAE (%) 3-8 -6-4 -2 2 4 6 8 1 12 INPUT POWER (dbm) For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 781-329-47 Order online at www.analog.com Application Support: Phone: 1-8-ANALOG-D 2
v1.117 AMPLIFIER, 3. - 4. GHz Input Return Loss vs. Temperature Output Return Loss vs. Temperature RETURN LOSS (db) - -1-1 -2 Reverse Isolation vs. Temperature REVERSE ISOLATION (db) -1-2 -3-4 - -6 27 Gain, Power & Quiescent Supply Current vs. Vpd @3. GHz 1 RETURN LOSS (db) -3-6 -9-12 -1 Noise Figure vs. Temperature NOISE FIGURE (db) 1 9 8 7 6 4 3 2 1 Additive Phase Noise Vs Offset Frequency, RF Frequency = 4 GHz, RF Input Power = 1 dbm (Psat) -9 GAIN (db), P1dB (dbm), Psat (dbm) 24 21 18 1 PSAT Icc P1dB GAIN 12 9 6 3 Icc (ma) PHASE NOISE (dbc/hz) -1-11 -12-13 -14-1 -16-17 -18 12 1. 2 2. 3 3. 4 4. Vpd (Vdc) -19 1 1K 1K 1K 1M 1M OFFSET FREQUENCY (Hz) 3 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 781-329-47 Order online at www.analog.com Application Support: Phone: 1-8-ANALOG-D
v1.117 AMPLIFIER, 3. - 4. GHz Absolute Maximum Ratings Collector Bias Voltage (Vcc) Control Voltage Range (Vpd) RF Input Power (RFIN)(Vs = Vpd = +Vdc) Outline Drawing +. Vdc +. Vdc +1 dbm Junction Temperature 1 C Continuous Pdiss (T = 8 C) (derate 14 mw/ C above 8 C) Thermal Resistance (junction to ground paddle).916 W 71 C/W Storage Temperature -6 to +1 C Operating Temperature -4 to +8 C ESD Sensitivity (HBM) PKG-484 3.1 3. 2.9.9.8.7.6 BSC 8 1 3.1 3. 2.9 Class 1A 4 TOP VIEW SIDE VIEW.8 4.9 4.68 1.9 BSC 1.1 MAX.2 GAGE PLANE EXPOSED PAD BOTTOM VIEW 2.41 MAX END VIEW.13.38 6 MAX.8.3.9 COPLANARITY.6 REF.22.1.4 COMPLIANT TO JEDEC STANDARDS MO-187-AA-T ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 1.78 MAX FOR PROPER CONNECTION OF THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION AND FUNCTION DESCRIPTIONS SECTION OF THIS DATA SHEET..22.8 8-Lead Mini Small Outline Package with Exposed Pad [MINI_SO_EP] (RH-8-4) Dimensions shown in millimeters. 1-13-217-A Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] [1] H326 HMC326MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 XXXX [2] H326 HMC326MS8GE RoHS-compliant Low Stress Injection Molded Plastic 1% matte Sn MSL1 XXXX [1] Max peak reflow temperature of 23 C [2] Max peak reflow temperature of 26 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 781-329-47 Order online at www.analog.com Application Support: Phone: 1-8-ANALOG-D 4
v1.117 AMPLIFIER, 3. - 4. GHz Evaluation PCB List of Materials for Evaluation PCB 1436 [1] Item J1 - J2 J3 C1 - C2 C3 C4 C L1 U1 PCB [2] Description PCB Mount SMA RF Connector 2mm DC Header 33 pf Capacitor, 63 Pkg..7 pf Capacitor, 63 Pkg. 3. pf Capacitor, 42 Pkg. 2.2 µf Capacitor, Tantalum 3.3 nh Inductor, 8 Pkg. HMC326MS8G / HMC326MS8GE Amplifier 1416 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 43, 1 mil thick, tr = 3.48 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Analog Devices upon request. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 781-329-47 Order online at www.analog.com Application Support: Phone: 1-8-ANALOG-D
v1.117 AMPLIFIER, 3. - 4. GHz Application Circuit TL1 TL2 TL3 Impedance ohm ohm ohm Physical Length.614.261.11 Electrical Length @ 3.7 GHz 1.7 44.6 19.2 Measurement Center of package pin to center of capacitor C3. Center of capacitor C3 to center TL for inductor. Center of TL for inductor to edge of capacitor C4. PCB Material: 1 mil Rogers 43 or Arlon 2FR Recommended Component Values L1 C1 - C2 C3 C4 3.3 nh 33 pf.7 pf 3. pf C 2.2 µf For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 916, Norwood, MA 262-916 Phone: 781-329-47 Order online at www.analog.com Application Support: Phone: 1-8-ANALOG-D 6