Owner s Manual Mode d emploi Manual de instrucciones

Transcription

1 English YDP-S34 Français Español Owner s Manual Mode d emploi Manual de instrucciones Before using the instrument, be sure to read PRECAUTIONS on pages 5-6. For information on assembling the instrument, refer to the instructions at the end of this manual. Avant d utiliser l instrument, lisez attentivement la section «PRÉCAUTIONS D USAGE» aux pages 5 et 6. Pour plus d informations sur l assemblage de l instrument, reportez-vous aux instructions figurant à la fin de ce manuel. Antes de utilizar el instrumento, lea las PRECAUCIONES, en las páginas 5-6. Para obtener más información sobre el montaje del instrumento, consulte las instrucciones que encontrará al final de este manual. EN FR ES

2 For YDP-S34 SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! If you must use an extension cord, the minimum wire size for a 25' cord (or less) is 18 AWG. : The smaller the AWG number, the larger the current handling capacity. For longer extension cords, consult a local electrician. This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product. SPECIFICATIONS SUBJECT TO CHANGE: The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units. This product, either alone or in combination with an amplifier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for long periods of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. IMPORTANT: The louder the sound, the shorter the time period before damage occurs. Some Yamaha products may have benches and/or accessory mounting fixtures that are either supplied with the product or as optional accessories. Some of these items are designed to be dealer assembled or installed. Please make sure that benches are stable and any optional fixtures (where applicable) are well secured BEFORE using. Benches supplied by Yamaha are designed for seating only. No other uses are recommended. NOTICE: Service charges incurred due to a lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service. ENVIRONMENTAL ISSUES: Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Battery Notice: This product MAY contain a small non-rechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. This product may also use household type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, never mix old batteries with new ones, and never mix different types of batteries. Batteries MUST be installed correctly. Mismatches or incorrect installation may result in overheating and battery case rupture. Warning: Do not attempt to disassemble, or incinerate any battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by the laws in your area. Note: Check with any retailer of household type batteries in your area for battery disposal information. Disposal Notice: Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. If your dealer is unable to assist you, please contact Yamaha directly. NAME PLATE LOCATION: The name plate is located on the bottom of the product. The model number, serial number, power requirements, etc., are located on this plate. You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase. Model Serial No. 92-BP (bottom) Purchase Date PLEASE KEEP THIS MANUAL

3 For YDP-S34 COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) Responsible Party : Yamaha Corporation of America Address : 6600 Orangethorpe Ave., Buena Park, Calif Telephone : Type of Equipment : Digital Piano Model Name : YDP-S34 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received including interference that may cause undesired operation. See user manual instructions if interference to radio reception is suspected. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (FCC DoC) For AC adaptor and YDP-S34 FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA. 3. : This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class B digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit OFF and ON, please try to eliminate the problem by using one of the following measures: Relocate either this product or the device that is being affected by the interference. Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s. In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable. If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

4 For AC adaptor This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B) (can_b_02) (fcc_sengen-c) CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilation openings. Install in accordance with the manufacturer s instructions. 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 Only use attachments/accessories specified by the manufacturer. 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13 Unplug this apparatus during lightning storms or when unused for long periods of time. 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. (UL60065_03) 4 YDP-S34 Owner s Manual

5 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. For AC adaptor WARNING This AC adaptor is designed for use with only Yamaha electronic instruments. Do not use for any other purpose. Indoor use only. Do not use in any wet environments. CAUTION When setting up, make sure that the AC outlet is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch of the instrument and disconnect the AC adaptor from the outlet. When the AC adaptor is connected to the AC outlet, keep in mind that electricity is flowing at the minimum level, even if the power switch is turned off. When you are not using the instrument for a long time, make sure to unplug the power cord from the wall AC outlet. For YDP-S34 WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/ac adaptor Do not place the power cord near heat sources such as heaters or radiators. Also, do not excessively bend or otherwise damage the cord, or place heavy objects on it. Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument. Use the specified adaptor (page 34) only. Using the wrong adaptor can result in damage to the instrument or overheating. Check the electric plug periodically and remove any dirt or dust which may have accumulated on it. Do not open This instrument contains no user-serviceable parts. Do not open the instrument or attempt to disassemble or modify the internal components in any way. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel. Water warning Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings. If any liquid such as water seeps into the instrument, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel. Never insert or remove an electric plug with wet hands. Fire warning Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire. If you notice any abnormality When one of the following problems occur, immediately turn off the power switch and disconnect the electric plug from the outlet. Then have the device inspected by Yamaha service personnel. - The power cord or plug becomes frayed or damaged. - It emits unusual smells or smoke. - Some object has been dropped into the instrument. - There is a sudden loss of sound during use of the instrument. DMI-5 1/2 YDP-S34 Owner s Manual 5

6 CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following: Power supply/ac adaptor Do not connect the instrument to an electrical outlet using a multiple-connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet. When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it. Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms. Assembly Read carefully the attached documentation explaining the assembly process. Failure to assemble the instrument in the proper sequence might result in damage to the instrument or even injury. Be sure to attach the anti-fall brackets to the instrument, to ensure stability. Failure to do so might result in damage to the instrument or even injury. Location Do not place the instrument in an unstable position where it might accidentally fall over. When transporting or moving the instrument, always use two or more people. Attempting to lift the instrument by yourself may damage your back, result in other injury, or cause damage to the instrument itself. Before moving the instrument, remove all connected cables, to prevent damage to the cables or injury to anyone who might trip over them. When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet. Connections Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. Be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. Handling caution Do not insert a finger or hand in any gaps on the key cover or instrument. Also take care that the key cover does not pinch your finger. Do not apply excessive force when closing the key cover. A key cover equipped with the SOFT-CLOSE mechanism closes the cover slowly. Applying excessive force to the key cover when closing it could damage the SOFT-CLOSE mechanism, and possibly result in injury to your hands and fingers caught under the closing key cover. Never insert or drop paper, metallic, or other objects into the gaps on the key cover, panel or keyboard. This could cause physical injury to you or others, damage to the instrument or other property, or operational failure. Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician. Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed. Always turn the power off when the instrument is not in use. Even when the [ ] (Standby/On) switch is in standby status (power lamp is off), electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet. The model number, serial number, power requirements, etc., may be found on or near the name plate, which is at the bottom of the unit. You should note this serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. (bottom_en_01) The name plate is located on the bottom of the unit. 6 YDP-S34 Owner s Manual DMI-5 2/2

7 NOTICE To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. Handling Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise. When you use the instrument along with an application on your smart device such as ipad, iphone or ipod touch, we recommend that you set Airplane Mode to ON on that device in order to avoid noise caused by communication. Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5 40 C, or F.) Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard. Maintenance When cleaning the instrument, use a soft and dry/slightly damp cloth. Do not use paint thinners, solvents, alcohol, cleaning fluids, or chemical-impregnated wiping cloths. During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface of the instrument. If water is left, the wooden parts may absorb the water and be damaged. Make sure to wipe any water off immediately with a soft cloth. Saving data Some of the data of this instrument (page 29) are retained when the power is turned off. However, the saved data may be lost due to some failure, an operation mistake, etc. Save your important data onto an external device such as a computer (page 29). Information About copyrights Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. This product incorporates and bundles contents in which Yamaha owns copyrights or with respect to which Yamaha has license to use others copyrights. Due to copyright laws and other relevant laws, you are NOT allowed to distribute media in which these contents are saved or recorded and remain virtually the same or very similar to those in the product. * The contents described above include a computer program, Accompaniment Style data, MIDI data, WAVE data, voice recording data, a score, score data, etc. * You are allowed to distribute medium in which your performance or music production using these contents is recorded, and the permission of Yamaha Corporation is not required in such cases. About functions/data bundled with the instrument Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original. About this manual The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument. The letters at the end of the model name ( B or WH, for example) are coded information about the finish of the instrument. For example, B indicates black walnut, and WH indicates white. Since they simply indicate the finish, these letters are omitted in this manual. iphone, ipad and ipod touch are trademarks of Apple Inc., registered in the U.S. and other countries. The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. Tuning Unlike an acoustic piano, this instrument does not need to be tuned by an expert (although the pitch can be useradjusted to match other instruments). This is because the pitch of digital instruments is always maintained perfectly. YDP-S34 Owner s Manual 7

8 Table of Contents PRECAUTIONS... 5 About the Manuals... 9 Included Accessories... 9 Panel Controls and Terminals...10 Basic Operations Setting Up...11 Key Cover and Music Rest...11 Turning the Power On...12 Setting the Volume...12 Auto Power Off Function...13 Using Headphones...13 Playing the Piano...14 Intelligent Acoustic Control (IAC)...14 Using the Pedals...15 Using the Damper Resonance...15 Setting the Operation Confirmation Sounds...16 Changing the Touch Sensitivity...16 Using the Metronome...17 Advanced Operations Recording Your Performance Recording Your Performance Changing the Initial Settings of the Recorded Song Deleting Recorded Data Using with a Computer or a Smart Device Using an App on Your Smart Device Playback/Recording of Audio Data (USB Audio) Backing up Data and Initializing the Settings Data Maintained When Power is Turned Off Saving User Song data to a computer Initializing the Settings Appendix Troubleshooting Keyboard Stand Assembly Specifications Index Playing Various Musical Instrument Sounds (Voices)...18 Selecting a Voice...18 Listening to the Demo Songs...19 Adding Variations to the Sound (Reverb)...20 Transposing the Pitch in Semitones...21 Fine-tuning the Pitch...21 Layering Two Voices (Dual mode)...22 Playing Duo...23 Song Playback and Practice...24 Listening to 50 Preset Songs...24 Listening to Songs Loaded from the Computer...24 Practicing a One-Hand Part...25 Playing from the Beginning of a Measure that Includes Rest or Silence YDP-S34 Owner s Manual

9 Thank you for choosing this Yamaha digital piano. This instrument provides exceptionally high-quality sound and expressive control for your playing enjoyment. In order to make the most of the performance potential and features of the instrument, please read the manuals thoroughly, and keep them in a handy place for later reference. About the Manuals This instrument has the following manuals. Included Manuals Owner s Manual (this book) Explains how to use the instrument. Quick Operation Guide (separate sheet) Shows in chart form the functions assigned to the buttons and the keyboard for quick understanding. Included Accessories Owner s Manual (this book) Quick Operation Guide (separate sheet) 50 Classical Music Masterpieces (music book) Online Member Product Registration Warranty* AC adaptor* * May not be included depending on your particular area. Please check with your Yamaha dealer. Online Manuals (PDF) iphone/ipad Connection Manual Explains how to connect the instrument to a smart device, such as iphone, ipad. Computer-related Operations Includes instructions on connecting this instrument to a computer, and operations related to transferring song data. MIDI Reference Contains the MIDI Data Format and MIDI Implementation chart, as well as descriptions on MIDI functions such as MIDI channel and Local Control settings. MIDI Basics (only in English, French and German) Contains basic explanations about MIDI. To obtain these materials, access the Yamaha Downloads website, then enter the model name for searching the desired files. Smart device application Smart Pianist With the specially developed Smart Pianist app running on your smart device, you can remotely control your digital piano for even more convenience and flexibility. By presenting various parameters on-screen, this app allows you to make settings in a visual, more intuitive manner. For more details on Smart Pianist, refer to the following Yamaha web site. For instructions on connecting the instrument to a smart device, Connection Wizard in Smart Pianist will guide you according to the operating condition and environment. To start the Connection Wizard, tap (Menu) located at the upper left of the screen to open the Menu display, and then tap Instrument Start Connection Wizard. Yamaha Downloads YDP-S34 Owner s Manual 9

10 Panel Controls and Terminals Bottom Bottom Rear PHONES (Keyboard side) (Keyboard side) [ ] (Standby/On) switch... page 12 For turning the power on or setting to standby. [MASTER VOLUME] knob... page 12 For adjusting the volume of the entire sound. [DEMO/SONG] button... pages 19, 24 For playing the Demo Songs and the Preset Songs. [PIANO/VOICE] button... pages 18, 20, 22 For selecting a single Voice, two Voices for layering or a Reverb Type. [METRONOME] button... page 17 For starting or stopping the metronome. [+R], [ L] buttons... pages 17, 18, 24, 25 In general, these are for selecting the next or previous Voice. During Song playback, these are for selecting the next or previous Song, and (while holding down [PLAY]) turning on/off the right-hand and lefthand Parts individually. During Metronome playback, these are for increasing or decreasing the Tempo. [REC] button... page 26 For recording your keyboard performance. [PLAY] button... page 26 For playing back the recorded performance. [FUNCTION]... pages 13, 21 Simultaneously holding both [DEMO/SONG] and [PIANO/VOICE] and pressing a specified key allows you to change various settings, including Auto Power off function, Transpose parameters, etc. [PHONES] jacks... page 13 For connecting a set of standard stereo headphones. [USB TO HOST] terminal... page 28 For connecting to a computer or a smart device such as an iphone or ipad. DC IN jack... page 12 For connecting the AC adaptor. [TO PEDAL] jack... page 32 For connecting the pedal cord. Pedals... page 15 For controlling expression and sustain, just as on an acoustic piano. 10 YDP-S34 Owner s Manual

11 Basic Operations Setting Up Key Cover and Music Rest CAUTION Hold the key cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to avoid catching fingers (yours or others, especially children s) between the key cover and main unit. Opening the key cover 1. Hold the edge of the key cover top with both hands, then open the key cover slowly. 2. Fold down the front part of the key cover. Closing the key cover 1. Fold the music rest. 2. Unfold the front part of the key cover. 3. Hold the key cover with both hands and close it slowly. The key cover is equipped with the special SOFT- CLOSE mechanism which closes the cover slowly. NOTICE Before closing the key cover, be sure to fold the music rest and unfold the front part of the key cover. CAUTION Be careful to avoid catching your fingers when opening or closing the cover. CAUTION Be careful to avoid catching your fingers when opening or closing the cover. CAUTION Do not apply excessive force when closing the key cover. Applying excessive force to the key cover when closing it could damage the SOFT-CLOSE mechanism, and possibly result in injury to your hands and fingers caught under the closing key cover. 3. Unfold the music rest. YDP-S34 Owner s Manual 11

12 Setting Up Turning the Power On 1. Connect the plugs of the AC adaptor in the order shown in the illustration. 2. Press the [ ] (Standby/On) switch to turn the power on. [ ] (Standby/On) switch Power indicator DC IN jack (page 10) DC plug AC adaptor AC outlet The shape of the plug and outlet differ depending on the locale. WARNING Use the specified adaptor (page 34) only. The use of other adaptors may result in irreparable damage to both the adaptor and the instrument. CAUTION Remove the AC plug from the AC outlet when the instrument is not to be used for extended periods of time, or during electrical storms. Follow this procedure in reverse order when disconnecting the AC adaptor. For the Power Adaptor with a Removable Plug Do not remove the plug from the power adaptor. If the plug is removed accidentally, slide the plug into place without touching the metallic parts, and then push the plug in completely until it clicks. Plug Slide the plug as indicated Power indicator If you close the key cover without turning the power to standby, the power indicator remains lit, indicating that the power is still on. When you re ready to turn the power to standby, press the [ ] (Standby/On) switch again for a second. The power indicator turns off. CAUTION Even when the [ ] (Standby/On) switch is in the standby status, electricity is still flowing to the instrument at a minimum level. When not using the instrument for an extended period of time, be sure to unplug the power cord from the wall AC outlet. NOTICE Press only the [ ] (Standby/On) switch when turning the power on. Any other operations, such as pressing the keys, buttons or pedals may cause the instrument to malfunction. Setting the Volume When you start playing, use the [MASTER VOLUME] knob to adjust the volume of the entire keyboard sound. The shape of the plug and outlet differ depending on the locale. WARNING Make sure to keep the plug attached to the AC adaptor. Using the plug alone can cause electric shock or fire. Never touch the metallic section when attaching the plug. To avoid electric shock, short circuit or damage, also be careful that there is no dust between the AC adaptor and plug. Level decreases Level increases CAUTION Do not use this instrument at a high volume level for a long period of time, to avoid damaging your hearing. 12 YDP-S34 Owner s Manual

13 Setting Up Auto Power Off Function To prevent unnecessary power consumption, this instrument features an Auto Power Off function that automatically turns the power off if the instrument is not operated for approximately 30 minutes. Default setting: Enabled Disabling Auto Power Off (simple method) Turn off the power of the instrument once. While holding down the A-1 key (the lowest key), press the [ ] (Standby/On) switch to turn the instrument on. The [REC] indicator flashes three times, indicating the Auto Power Off function has been disabled. Lowest key Switching the Auto Power Off Function (Enable/Disable) While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press the A#0 key to enable the Auto Power Off function or the A0 key to disable it. Lowest key Using Headphones Since this instrument is equipped with two [PHONES] jacks, you can connect two sets of standard stereo headphones. If you are using only one set of headphones, insert a plug into either jack, which automatically shuts off the speakers according to the default setting. A#0 (Enable) A0 (Disable) Bottom surface Standard stereo phone plug PHONES CAUTION Do not use headphones at a high volume for an extended period of time; doing so may cause hearing loss. Speaker On/Off setting You can set whether the sound of this instrument is always output from its built-in speaker or not. While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press one of the D6 E6 key. Off (D6 key) On (D#6 key) Normal (E6 key) Reproducing a natural sense of distance (Stereophonic Optimizer) The Stereophonic Optimizer gives you the feeling of playing an actual acoustic piano even though you re listening through headphones. Normally, the sound comes out from headphones sounds very close to your ears. However, this Stereophonic Optimizer effect recreates a natural distance or the sense of physical space between your ears and the instrument, just as when playing an acoustic piano. Default setting: On The speaker will not sound. D#6 (On) D6 (Off) Highest key E6 (Normal) The speaker will always sound regardless of whether a set of headphones is connected or not. The speaker will sound only if headphones are not connected. (This is the default setting.) While holding down [PIANO/VOICE], press the F#3 key to turn the function on or the F3 key to turn the function off. C3 F#3 (On) F3 (Off) YDP-S34 Owner s Manual 13

14 Playing the Piano Intelligent Acoustic Control (IAC) With this function, the sound quality of this instrument is automatically adjusted and controlled according to the overall volume. Even when the volume is low, this lets you hear both low sounds and high sounds clearly. Default setting: On To turn on IAC: While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press the C#2 key. Lowest key C#2 To turn off IAC: While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press the C2 key. Lowest key C2 To adjust IAC Depth: While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press the D2 key to decrease the value, or the E2 key to increase. D#2 (Default) Lowest key D2 (Depth -1) E2 (Depth +1) The higher the value, the more clearly that low and high sounds are heard at lower volume levels. Setting range: Default setting: 0 (D#2) 14 YDP-S34 Owner s Manual

15 Playing the Piano Using the Pedals Damper Pedal (Right) Pressing this pedal will sustain notes longer. Releasing this pedal immediately stops (damps) any sustained notes. This pedal also features a half-pedal function that creates partial sustain effects, depending on how far down you press the pedal. Sostenuto Pedal (Center) Pressing this pedal while holding the notes will sustain the pressed notes (as if the Damper Pedal had been pressed), but all subsequently played notes will not be sustained. This makes it possible to sustain a chord or single low note, for example, while the other notes are played staccato. Soft Pedal (Left) When you press the damper pedal here, this note and the notes you play before you release the pedal sustain longer. When you press the sostenuto pedal here while holding the note, the note will sustain as long as you hold the pedal. Pressing this pedal will reduce the volume and slightly change the timbre of the notes. The notes played before this pedal is pressed are not affected. If the damper pedal doesn t work, make sure that the pedal cord is properly plugged into the main unit (page 32). Half-pedal function This function allows you to vary the sustain length depending on how far the pedal is pressed. The farther down you press the pedal, the more the sound sustains. For example, if you press the damper pedal and all notes you are playing sound a bit murky and loud with too much sustain, you can release the pedal half way or higher to decrease the sustain (murkiness). While the sostenuto pedal is held, the organ and strings Voices sound continuously without decay after the notes have been released. When Jazz Organ Voice (page 18) is selected, pressing the left pedal switches between fast/slow rotation of the rotary speaker. When the Vibraphone Voice (page 18) is selected, the left pedal switches Vibrato on and off. Using the Damper Resonance The Damper Resonance effect simulates the sustain sound of the damper pedal on a grand piano, as if you were pressing the damper pedal and playing the keyboard. This effect is applied only to the Piano Voices (page 18). To turn on the Damper Resonance: While holding [PIANO/VOICE], press the C#3 key. Default setting: On To turn off the Damper Resonance: While holding [PIANO/VOICE], press the C3 key. C#3 (On) Lowest key C3 (Off) YDP-S34 Owner s Manual 15

16 Playing the Piano Setting the Operation Confirmation Sounds When a setup is changed using a button and key combination, an operation sound ( On, Off, click, tempo value input) is sounded. This confirmation sound can be enabled (ON) or disabled (OFF) as desired. Turning the Operation Confirmation Sounds on While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press the A#-1 key. Default setting: On Turning the Operation Confirmation Sounds off While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press the A-1 key. A#-1 (On) Lowest key A-1 (Off) Changing the Touch Sensitivity You can specify the Touch Sensitivity (how the sound responds to the way you play the keys). While holding down [PIANO/VOICE], press one of the C6 D#6 keys. C#6 D#6 This setting is disabled with some Voices, such as an organ sound. Default setting: C#6 (Medium) C6 D6 Highest key (C7) Key C6 Touch Sensitivity Soft Description The volume level does not change much when you play the keyboard soft or hard. C#6 Medium This is the standard piano touch response. D6 Hard D#6 Fixed The volume level changes very widely from pianissimo to fortissimo to facilitate dynamic and dramatic expression. You have to hit the keys hard to produce a loud sound. The volume level does not change at all regardless of whether you play the keyboard soft or hard. 16 YDP-S34 Owner s Manual

17 Playing the Piano Using the Metronome The metronome feature is convenient for practicing with an accurate tempo. 1. Press [METRONOME] to start the Metronome. 2. Press [METRONOME] to stop the Metronome. F#0 (Default setting) C#2 (Default setting) C#3 D# Lowest key A-1 F0 G0 C1 A1 C2 D2 C3 D3 Confirming the current Tempo Adjusting the Volume Adjusting the Tempo E3 F3 Selecting the Beat (time signature) Voice confirmation of current Tempo value (in English) While holding down [METRONOME], press the A-1 key (lowest key). Selecting the Beat (time signature) While holding down [METRONOME], press one of the C3 F3 keys. Adjusting the Tempo The Metronome tempo can be set from 5 to 280 beats per minute. To increase or decrease the value by 1: While holding down [METRONOME], press [+R] to increase or [ L] to decrease. While the metronome is playing, press [+R] to increase or [ L] to decrease. To increase or decrease the value by 10: While holding down [METRONOME], press the D2 key to increase or the C2 key to decrease. To specify a numeric value: While holding down [METRONOME], press the relevant C1 A1 keys one by one in order. Specifying three digits or releasing [METRONOME] after specifying one or two digits will enter the value. Resetting the value to the default (120) While holding down [METRONOME], press [+R] and [ L] simultaneously, or press the C#2 key. While the metronome is playing, press [+R] and [ L] simultaneously. Adjusting the Volume While holding down [METRONOME], press the G0 key to increase the volume or the F0 key to decrease. To reset to the default setting, press the F#0 key while holding down [METRONOME]. Key Beat (time signature) C3 0 (no accent) C#3 2 D3 3 D#3 4 E3 5 F3 6 A numeric value is read out when a relevant key is pressed. If the entered value is outside the setting range, it will be ignored. Setting range: 1 10 Default setting: 7 (F#0) YDP-S34 Owner s Manual 17

18 Advanced Operations Playing Various Musical Instrument Sounds (Voices) Selecting a Voice To select CFX Grand : Simply press [PIANO/VOICE]. To select another Voice: After pressing [PIANO/VOICE], press [+R] or [ L] to select the next or previous Voice. To hear the characteristics of the Voices, play back the Demo Songs (page 19). To select a specific Voice: While holding down [PIANO/VOICE], press one of the C1 A1 keys. For details on which Voice is assigned to each key, see the list below. C#1 D#1 F#1 G#1 Lowest key C1 D1 E1 F1 G1 A1 Voice List Key Voice Name Voice description C1 CFX Grand Yamaha s CFX flagship concert grand piano sound with a wide dynamic range for maximum expressive control. Suitable for playing in any music genre and style. C#1 Mellow Grand D1 Pop Grand D#1 Stage E.Piano E1 DX E.Piano F1 Harpsichord F#1 Vibraphone G1 Pipe Organ G#1 Jazz Organ A1 Strings Grand piano sound with a soft and warm tone. Good for playing ballads. Bright piano sound. Good for clear expression and cutting through other instruments in an ensemble. The sound of an electric piano using hammer-struck metallic tines. Soft tone when played lightly, and an aggressive tone when played hard. An electronic piano sound created by FM synthesis. Good for standard popular music. The definitive instrument for baroque music. Since harpsichord uses plucked strings, there is no touch response. There is, however, a characteristic additional sound when the keys are released. Vibraphone played with relatively soft mallets. The tone becomes more metallic the harder you play. This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music from the Baroque period. The sound of a tonewheel type electric organ. Often heard in jazz and rock music. The rotary speed of the rotary speaker effect can be switched by using the left pedal. Stereo-sampled, large-scale strings ensemble with realistic reverb. Try combining this Voice with piano in the Dual mode. 18 YDP-S34 Owner s Manual

19 Playing Various Musical Instrument Sounds (Voices) Listening to the Demo Songs Special individual Demo Songs are provided for all of the instrument Voices. 1. Press [DEMO/SONG] to start playback. The Demo Song for the current Voice starts. During playback, the [PLAY] lamp flashes at the current tempo. Starting with the selected song, the playback of the Demo Songs will continue. After the last demo song, the sequence then returns to the first Demo Song and repeats until you stop it. To change the Demo Song during playback: Press [+R] or [ L] to change to the next or previous Demo Song. To change to a specific Demo Song, press and hold down [DEMO/SONG], then press one of the C1 A1 keys. If you want to change the playback tempo, see page 17. Lowest key C1 A1 2. Press [DEMO/SONG] or [PLAY] to stop playback. The [PLAY] lamp turns off. Demo Song List Key Voice Name Title Composer C1 CFX Grand C#1 Mellow Grand El pelele - Escena goyesca, Goyescas - Los majos enamorados II No.7 Von fremden Ländern und Menschen, Kinderszenen op E. Granados R. Schumann D1 Pop Grand Original D#1 Stage E.Piano Original E1 DX E.Piano Original F1 Harpsichord Concerto a cembalo obbligato, 2 violini, viola e continuo No.7, BWV 1058 J. S. Bach F#1 Vibraphone Original G1 Pipe Organ Herr Christ, der ein'ge Gottes-Sohn, BWV 601 J. S. Bach G#1 Jazz Organ Original A1 Strings Original The Demo Songs excluding original Songs are short rearranged excerpts from the original compositions. The original Demo Songs are Yamaha originals ( Yamaha Corporation). YDP-S34 Owner s Manual 19

20 Playing Various Musical Instrument Sounds (Voices) Adding Variations to the Sound (Reverb) This instrument features several Reverb Types that add extra depth and expression to the sound to create a realistic acoustic ambience. The appropriate Reverb Type and Depth are called up automatically when you select each of the Voices and Songs. This is why the Reverb Type need not be selected; however, you can change it if desired. To select a Reverb Type: While holding down [PIANO/VOICE], press one of the C2 E2 keys. Selecting a Reverb Type C#2 D#2 G#2 (Default) Reverb in Dual Mode (page 22) An optimum reverb type for the combination of Voices is assigned automatically. Reverb Type List Key Reverb Type Description C2 Recital Hall C#2 Concert Hall D2 Chamber D#2 Club Lowest key C2 D2 E2 A2 (Depth +1) G2 (Depth -1) E2 Off No effect is applied. Adjusting Reverb Depth Simulates the clear reverb sound you would hear in a mediumsized concert hall for piano recitals. Simulates the gorgeous reverb sound you would hear in a large concert hall for orchestral performances. Suitable for playing chamber music; simulates the intimate reverb sound you would hear in a spacious room, such as for classical music recitals. Simulates the vivid reverb sound you would hear in a live music venue or a jazz club. To adjust Reverb Depth: While holding down [PIANO/VOICE], press the G2 key to decrease the value by 1 or the A2 key to increase the value by 1. While holding down [PIANO/VOICE], press the G#2 key to reset the Reverb Depth to the default setting, which is the most suitable value for the current Voice. Reverb Depth range: 0 (no effect) 20 (maximum depth) 20 YDP-S34 Owner s Manual

21 Playing Various Musical Instrument Sounds (Voices) Transposing the Pitch in Semitones You can shift the pitch of the entire keyboard up or down in semitones in order to facilitate playing in difficult key signatures, or to easily match the pitch of the keyboard to the range of a singer or other instruments. For example, if +5 is selected, playing key C produces pitch F, letting you play a song of F major as though it were in C major. To transpose the pitch down: While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between F#2 (-6) and B2 (-1). To transpose the pitch up: While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between C#3 (+1) and F#3 (+6). To restore the normal pitch: While holding down [DEMO/SONG] and [PIANO/VOICE], press the C3 key. The transposition setting affects not only the pitch of the keyboard but also the pitch of Song playback (page 24). F#2 F# Lowest key Transpose down Transpose up C3 (Normal pitch) Fine-tuning the Pitch You can fine-tune the pitch of the entire instrument in about 0.2 Hz steps. This lets you accurately match the keyboard pitch to that of other instruments or CD music. To tune up (in about 0.2 Hz steps): Press and hold down [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press [+R]. To tune down (in about 0.2 Hz steps): Press and hold down [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press [ L]. To set the pitch to Hz: Press and hold down [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press the C#1 key. To restore default pitch (440.0 Hz): While simultaneously holding down [DEMO/ SONG] and [PIANO/VOICE], press [+R] and [ L] simultaneously. Alternately, you can press the C1 key while holding down [DEMO/ SONG] and [PIANO/VOICE] simultaneously. Lowest key C#1 Hz (Hertz) This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second. Setting range: Hz Default setting: A3 = Hz YDP-S34 Owner s Manual 21

22 Playing Various Musical Instrument Sounds (Voices) Layering Two Voices (Dual mode) You can layer two Voices and play them simultaneously to create a more richly textured sound. 1. Engage the Dual mode. While holding down [PIANO/VOICE], simultaneously hold down two keys between C1 and A1 to select the two desired Voices. For information on which Voices are assigned to the keys, refer to Voice List (page 18). C1 A1 Lowest key Engaging Dual mode The Voice assigned to the lower key will be designated as Voice 1, and the Voice assigned to the higher key will be designated as Voice 2. You cannot assign the same Voice to both Voice 1 and Voice 2 simultaneously in Dual mode. To shift the Octave for each Voice: While holding down [PIANO/VOICE], press one of the keys F5 G5 or A5 B5 as shown in the illustration below. For example, pressing the B5 key twice while holding down [PIANO/VOICE] shifts Voice 1 up by two octaves. To restore the default setting, simultaneously hold down [PIANO/VOICE] and press the A#5 key for Voice 1 or the F#5 key for Voice 2. Adjusting the balance The Dual and Duo modes (page 23) cannot be engaged at the same time. Setting range: C#5 F5 B C5 D5 Voice 2 Voice 1 Highest key Shifting the octave To adjust the Balance between two Voices: While holding down [PIANO/VOICE], press the C5 key to decrease the value or the D5 key to increase. When the value is set to 0, the volume levels of the two Voices reset to their respective default settings. Settings below 0 increase the volume of Voice 2, while settings above 0 increase the volume of Voice 1, in relation to the other. 2. To exit from Dual mode, press [PIANO/VOICE]. Setting range: YDP-S34 Owner s Manual

23 Playing Various Musical Instrument Sounds (Voices) Playing Duo This function allows two different players to play the instrument, one on the left and the other on the right, over the same octave range. 1. While holding down [PIANO/VOICE], press [+R] and [ L] simultaneously to engage Duo. The keyboard is divided into two sections, with the E3 key as the Split Point. Different Voices cannot be assigned to the Right Voice and Left Voice. The Split Point cannot be changed from E3. In Duo, Reverb, Damper Resonance and Stereophonic Optimizer are not effective. Equivalent to C3 (middle C) Split Point E3 Equivalent to C3 (middle C) Left section (Voice 2) Right section (Voice 1) 2. One person can play the left section of the keyboard while the other plays the right. To shift the Octave for each section: Same operation as in Dual (page 22). In Duo, the left section is assigned to Voice 2, while the right section is assigned to Voice 1. To adjust the volume balance between two keyboard sections: Same operation as in Dual (page 22). Settings below 0 increase the volume of Left Voice (Voice 2), while settings above 0 increase the volume of Right Voice, in relation to the other. Pedal function in Duo Damper Pedal: Applies Sustain to the right section. Sostenuto Pedal: Applies Sustain to both sections. Soft Pedal: Applies Sustain to the left section. 3. To exit from Duo, simultaneously hold down [PIANO/ VOICE] and press [+R] and [ L]. Setting range: Setting range: Sounds played in the left section are played from the left speaker, and sounds played in the right section are played from the right speaker. If the keyboard is in Dual mode, engaging Duo will exit from Dual, and Voice 1 is used over the entire range of the keyboard. YDP-S34 Owner s Manual 23