X820S Seismic / accelerometric digitizer channels - 24 bit

Transcription

1 Seismic / accelerometric digitizer channels - 24 bit

2 DESCRIPTION Seismic/accelerometric digitizer equipped with embedded channels for active and passive seismic surveys, dynamic investigations and buildings dynamic studies. X820S basic configuration integrates 24 channels and can be expanded with 24 channels modules, without external boxes, up to maximum 96 integrated channels. Acquisition system represents enhancement of consolidated recording technology AD 24 Bit / S.S.C. (Single Sampler Converter) developed by MAE, which includes adoption of a single analogic/digital converter with high resolution dedicated for each input channel. S.S.C. design with dedicated converter for each single channel allows to record every trace with maximum resolution, improving reliability of each acquisition. Instrument is equipped with PC, 10 integrated monitor and Windows 10 operative system. Management of all choices referring to investigation, recording settings, execution and visualization of recorded data is realized and an easy and intuitive manner through operative system installed on the instrument. High protection case (IP67) and frontal panel, entirely made of high thickness aluminum, allow a comfortable and safety use even in bad weather conditions. X820S represents ideal solution for every kind of seismic survey of active and passive typology, moreover, high dynamic range and care in project make instrument particularly ideal also for Non Destructive Tests, especially for dynamic tests on buildings, being able to record signals coming from both velocity and acceleration sensors. Above mentioned features, together with wide range of available accessories which can be connected to X820S, make instrument versatile and capable to perform all seismic surveys, from surface investigations such as refraction, reflection (P and S waves), M.A.S.W., Re.Mi., E.S.A.C., bore-hole such as Down Hole and Cross Hole, stand-alone passive seismic of H.V.S.R. typology and vibration monitoring. With particular regards to seismic survey methodologies, 24 channels module allows the adoption of a single cable 24 takeouts that, together with integrated battery pack, allows to reduce number of accessories to bring on site at every survey. Multiple tools of monitoring and system check complete seismograph kit with many analysis instruments and data check, which goes from background noise analysis, traces filtering and different visualization options of recorded seismograms, available to user for later processing. 2

3 STRENGTH POINTS - Multipurpose system, ideal for every survey with velocity or acceleration sensors - Management of every kind of seismic survey - Can be configured with internal channels - No external expansion box to increase number of channels - Seismic cable with 24 takeouts module on a single cable - Integrated battery with broad operative autonomy - 24 bit resolution on each channel - Display touch screen 10 - GPS receiver - LAN interface (1) - USB interface (2) - HDMI interface (1) - IP-67 protection rate (close cover) 3

4 RECORDING TECHNICAL FEATURES Sample resolution ADC bit (Fc max Hz) Number of channels n Bandwidth Hz / selectable Low Pass Filter max.2000hz Maximum distortion % Dynamic range 128dB Common mode rejection 110 db at 60 Hz Diaphony -128dB at 20 Hz Sampling frequency Selectable from 60 Hz to Hz Amplificator noise threshold 1µV Anti alias filter -3dB, 80% of Nyquist frequency, -80dB Input signal maximum range +/-1.25V Input impedance 39KOhm 4

5 TECHNICAL FEATURES GENERAL X820S Power supply 11,1V da 10,4Ah/115W lithium ions internal batteries Recharge mode 12 V battery charger with status led Average absorption in acquisition 1,5 A Environmental working conditions Temperature ( C):-20 a 80; Relative humidity (RH): 0-90% Weight and dimensions 6 kg 40 cm x39.5 cm x15.2 cm Display TFT-LCD 10 capacitive with integrated touch-screen Digital filters Selectable from application X820S seismic app. Data format and storage.sg2 on internal memory or external with USB Available interfaces LAN, USB, HDMI, Display Port Management and configuration through internal application X820S Seismic App. Integrated GPS module for UTC time synchro and X820S positioning Geophones test for automatic check of cables functionality, identification of broken and short-circuited sensors Trigger based on channels coincidence and pre-trigger time settable from software, adjustable Internal self-calibration of converters before each acquisition CE certificate of conformity to European regulation on electric equipment FUNCTIONING Management application includes many tools which allow to properly set instrument according to operative modalities selected by user, such as: - Data filtering before processing - Data filtering after processing - Gain and signal amplification settings - Sampling frequency setting - Recording time duration - Stacking (iteration) - Sum and difference on each single channel 5

6 Stack operations (iteration) of sum and difference on each channel allow to increase signal / noise ratio, making easier to identify wave phase and specific filtering operations before and after recording. Each channel can be visualized independently and on each trace it is possible to perform frequency analysis (FFT), in order to include main frequencies in real time. It is also possible to program recording geometry on field to facilitate later processing. X820S measurement settings 6

7 In passive seismic mode it is possible to select recording duration and a waiting time before recording start; a progressive bar is visualized, to indicate recording status. Application includes a Tutorial which provides a guide to user for instrument configuration with correct settings for the specific type of survey to perform. 7