PRODUCT CATALOGUE 2016

Transcription

1 Power cables accessories for low, medium and low-high voltage 2016

2

3 PRODUCT CATAOGUE 2016 Content Page ow Voltage product range 5 Medium Voltage Terminations 15 Medium Voltage joints 29 OW-High Voltage Accessories 41 smart terminations 45 resins 51 HEAT-SHRINKABE tubing, TAPES & MASTICS and metal components 55

4 Company profile Introduction active in the energy cable has the competence to work and chemical analysis of The origins of the Nexans production, soon decided to with customers on a global insulating, anti-tracking, and Offida began with a create a highly specialized scale and create personalized stress control materials, both company called ITACO group of companies known solutions that are specifically for tubing and mastics. founded in Three as the Power Accessories adapted to our clients Nexans, together with all the entrepreneurs from Milan Business Group (PABG) in requirements and environment. Power Accessories Business set up the company in order order to focus efforts on the The product development group members, develops, to manufacture high quality sales and development of centre of Nexans Italia in designs, plans, produces and metal-connectors for the Italian cable accessories. Offida has been certified energy networks. Soon the With expertise in various according to ISO 9001, company s focus shifted technologies Nexans ISO as well as towards the design and manufactures a wide variety IRIS (International Railway manufacturing of accessories of cable Accessories like Industry Standard) and for cable installers. cold shrink (Nexans Power OHSAS Our group In 1990 the company was Accessories France), heat of engineers and technicians acquired by the Alcatel shrink (Nexans Italia, Offida), use the most advanced group which for the first slip on, screened connectors tools and equipments to commercializes cable time delivered the global and bushings (Nexans create, verify and test all accessories for low, medium marketplace to the doorstep Network Solutions, Belgium), our products between the and high voltage cable of ITACO. In 2000, Alcatel as well as ferrules and lugs different laboratories and networks, offers training, an decided to divide its cable with shear bolt technology material research centres of extensive product portfolio, activities within the group on a (Nexans Power Accessories the Nexans group, Offida has and the highest level of global scale. As a result of this Germany, GPH in Hof) extensive know how in the customer support to our global move Nexans was created. With a long experience in field of heat shrink materials as clients. Nexans, derives from the the production of accessories well as mastics. We are well atin word nexus (link), for electrical cables, Nexans equipped to perform physical OFFIDA plant

5 Production In order to guarantee the highest level of quality to our end customers, the Offida plant is specialized in the production of all the specific wall thickness. In order to enhance the chemical and physical properties of the material, the tubes are then cross linked by electron beam. This process changes the Mastics for electrical use The complete range of our mastics have been developed and are completely manufactured in house produced by means of a 630 Resins for electrical use Casting and insulating resins have been designed & manufactured by Nexans Italy components of its products molecule structure of the such as: heat-shrink tubes, polyolefin, giving it mastics and resins for electrical applications. for now more than 30 years. The plant is equipped with liter mixer in a dedicated 2 semi-automatic machines part of the plant. The mastics for the fabricating/filling memory, hence ready for produced are designed to the 2 components bags, expansion. The final product accommodate a wide variety A part (resin) and a B part is delivered expanded and of accessories like heat and (hardener). The production Heat shrink tubes Heat shrink technology dates back to 1960s. The technology involves 3 crucial by applying heat the tubes recover to their original extruded size thanks to the memory set during cross- cold-shrink as well as slip ons. Various sealing, anti-tracking and stress control s make up our product portfolio. focuses on PUR as well as Epoxy s. steps. linking. 1. Extrusion, 2. Cross linking (giving the tube memory ) 3. Expansion. The compound of each tube is individually designed for a specific application, utilizing modified polyethylene materials. The tubes are extruded at a given size and

6 4

7 OW VOTAGE PRODUCT RANGE Content Page 1GR Cast Resin Straight Joints 6 1GRD / 1GRT Cast Resin BRANCH/TEE Joints 7 1GT4 GR 1 to 7 (SVMS ) Heat-Shrinkable Straight Through Joints 8 1GT C-E Heat-Shrinkable Straight Through Joints for Cables with Concentric Neutral 9 1GT KI Heat-Shrinkable Straight Through Armored Joints 10 1GDT Heat-Shrinkable Branch Joints 11 1TTE Heat-Shrinkable Outdoor Termination for Armored or Unarmored Cables 12 1SES Heat-Shrinkable ive End Seal Kits for Cables 13 5

8 1GR Cast Resin Straight Joints Up to 0,6/1 (1,2) kv The 1GR cast resin straight joints are designed to connect various s of low voltage cables with polymeric (PVC, XPE) or paper insulation. The joints provide excellent mechanical protection and good electrical insulation. Available with PUR or Epoxy resins. The joints can be energized immediately after installation. Joints can also accommodate armored cables with the addition of an armor kit. Kit contents - Injection molded shells - 2 chamber resin bag / or in cans - Sealing tape - Instruction manual - (Armor kit for cables w. armor) Ø H Meets specifications: EN armor add on kit resin application range max size (mm 2 ) Ø cable Ø 1GR1 ACK-1 EPOXY 1x95 2x25 3x16 4x GR2 ACK-2 EPOXY 1x240 2x50 3x35 3x35+1x GR3 ACK-3 EPOXY 1x400 2x95 3x70 3x70+1x GR4 included PUR 1x630 2x185 3x150 3x150+1x GR5 included PUR 1x630 2x300 3x300 3x300+1x GR6 included PUR 1x630 2x400 3x300 3x300+1x Standard resin: EPOXY for 1GR1, 1GR2 and 1GR3 Standard resin: PUR with fillers for1gr4, 1GR5 and 1GR6 H 6

9 1GRD / 1GRT Cast resin BRANCH/TEE joints Up to 0,6/1 (1,2) kv The 1GRD/1GRT cast resin branch/tee joints are designed to accommodate multi core low voltage cables with PVC or XPE insulation. The joints can be filled with either PUR or Epoxy resin. The joints can be energized immediately after installation. Joints can also accommodate armored cables with the addition of an armor kit. Kit contents - Injection molded shells - 2 chamber resin bag / or in cans - Sealing tape - Instruction manual - (Armor kit for cables w. armor) H Ø H Ø Meets specifications: EN BRANCH JOINT armor resin application range Ø H add on kit max size (mm 2 ) Ø main Ø branch 1GRD1 ACK-D1 EPOXY 1x95 2x25 3x16 4x GRD2 ACK-D2 EPOXY 1x240 2x70 3x50 3x35+1x GRD3 included PUR 1x300 2x95 3x70 3x50+1x GRD4 included PUR 1x400 2x120 3x95 3x95+1x GRD5 included PUR 1x630 2x185 3x150 3x150+1x Standard resin: EPOXY for 1GRD1 and 1GRD2 Standard resin: PUR with fillers for1grd3, 1GRD4 and 1GRD5 TEE JOINT armor resin application range Ø H add on kit max size (mm 2 ) Ø main Ø branch 1GRT1 ACK-D1 EPOXY 1x150 2x50 3x35 4x GRT2 ACK-D2 EPOXY 1x300 2x70 3x50 3x50+1x Standard resin: EPOXY 7

10 Heat-Shrinkable ow Voltage Straight Through joints Up to 0,6/1 (1,2) kv 1GT4 GR 1 to 7 / (SVMS ) The 1GT4 GR 1-7 low voltage heat-shrinkable straight joint kits are designed for plastic insulated cables in full accordance with DIN The kits are designed to accommodate the DIN specific mechanical shear bolt connectors (GPH D-Series), and are fully tested acc. to EN GT4 heavy wall tubing w. adhesive is used to create the joint. The tube is used to insulate the core/connector as well as rebuilding the outer jacket. Kit contents - 4 x GT4 heavy wall tubing w. adhesive for core insulation - 4 x GPH D series mechanical shear bolt connectors (only C series) - 1 x GT4 heavy wall tubing w. adhesive to rebuild the outer sheath Type tested acc. to: EN50393 Meets specifications: DIN47640 application range (mm 2 ) 1GT4-GR GT4-GR GT4-GR GT4-GR GT4-GR GT4-GR GT4-GR application range (mm 2 ) 1GT4-GR1 C 4 16 Cu/Al 420 1GT4-GR2 C Cu/Al 430 1GT4-GR3 C Cu/Al 500 1GT4-GR4 C Cu/Al 710 1GT4-GR5 C Cu/Al 890 1GT4-GR6 C Cu/Al 890 1GT4-GR7 C Cu/Al 1100 With code C the kits are supplied w.mechanical connectors 8

11 1GT C-E Heat-Shrinkable ow Voltage Straight Through joints for cables with concentric neutral Up to 0,6/1 (1,2) kv The 1GT C-E heat-shrinkable low voltage joint kits are designed to connect low voltage cables with concentric neutral having PE, PVC, or XPE outer sheaths. The kits can be ordered with crimped or mechanical connectors. Kit contents - Inner core/connector insulating tubes w. adhesive - Outer tube w. adhesive - Ferrules (crimp or mechanical, market specific) Meets specifications: EN GT2C-E 1GT3C-E 1GT4C-E application range (mm 2 ) 3x6+6C Cu 3x6+16C Cu 3x25+25C Cu 3x50+25C Cu 3x95+50C Cu 3x150+95C Cu GT2CA-E 3x10+6C Al 375 1GT3CA-E 1GT4CA-E 3x25+16C Al 3x50+25C Al 3x95+35C Al 3x150+50C Al GT6CA-E 3x240+95C Al

12 1GT KI Heat-Shrinkable low voltage straight through armored joints Up to 0,6/1 (1,2) kv The 1GT KI heat-shrinkable low voltage straight through joints, are designed to connect armored cables with STA or SWA having PVC, PE, XPE or EPR insulation. The joints are designed to accommodate both crimp or mechanical ferrules. Kit contents - Inner core/connector insulating tubes w. adhesive - Canister & earthing kit (depending on cable) - Outer protective tube(s) w. adhesive Meets specifications: EN application range (mm 2 ) 1GT4.16 KI 4x10-16 Cu/Al 750 1GT4.35 KI 4x25-35 Cu/Al 750 1GT4.95 KI 4x50-95 Cu/Al 750 1GT4.150 KI 4x Cu/Al 750 1GT4.240 KI 4x Cu/Al 750 1GT4.400 KI 4x Cu/Al

13 1GDT Heat-Shrinkable OW VOTAGE BRANCH JOINTS Up to 0,6/1 (1,2) kv The 1GDT heat-shrinkable low voltage branch joint kits are designed to accommodate 4 core plastic cables, with or without armor. Kit contents - Inner core/connector protection tubes w. adhesive - Outer heat-shrinkable wraparound sleeve with or without reinforcement - For armored cable: Armor continuity kit supplied Meets specifications: EN application range (mm 2 ) main branch 1GDT2 4x6 4x10 2x2,5-4x2,5 1GDT3 4x6 4x25 2x2,5-4x2,5 1GDT4 3x x x2,5-4x25 11

14 Heat-Shrinkable ow voltage outdoor termination for armored or unarmored cable Up to 0,6/1 (1,2) kv 1TTE The 1TTE heat-shrinkable low voltage outdoor termination kits are designed for cables up to 4 cores with or without armor. The adhesive coating on the lug sealing tubes, the breakout body and fingers provides a good environmental seal, while the cores are protected with thin or medium wall tubing. All components are UV resistant. Kit contents - Breakout - Core protection tube (thin or medium wall sleeves) - ug sealing tubes w. adhesive - For armored cable: Armor continuity kit consist of corrosion protection sleeve and earth braid Type tested acc. to: EN application range (mm 2 ) 1TTE3 & 1TTE 4.16 W TTE3 & 1TTE 4.50 W TTE3 & 1TTE W TTE3 & 1TTE W Kits for unarmored cables application range (mm 2 ) 1TTE3 & 1TTE 4.16 Z TTE3 & 1TTE 4.50 Z TTE3 & 1TTE Z TTE3 & 1TTE Z Kits for armored cables 12

15 1SES Heat-Shrinkable live end seal kits FOR OW VOTAGE CABES Up to 0,6/1 (1,2) kv The SES kits provides insulation for energized V cables. The end caps are spiral coated with adhesive, therefore the cables can be left outdoors. The caps are weathering resistant are supplied with the required energized symbol warning mark. Kit contents - 3, or 4 core protective caps, 1 outer sealing cap - Tinned copper mesh supplied neutral for concentric neutral cable Meets specifications: EN application range max size (mm 2 ) max. core Ø cable max. outer Ø cable 1SES 6 4x SES 16 10x SES 35 25x SES x SES x

16 14

17 MEDIUM VOtaGE terminations Index products Page MONOi Heat-Shrinkable MV INDOOR TERMINATIONS FOR SInGE CORE POYMERIC CABES WITH Cu WIRE OR TAPE SCREEN 16 MONOe Heat-Shrinkable MV OUTDOOR TERMINATIONS FOR SInGE CORE POYMERIC CABES WITH Cu WIRE OR TAPE SCREEN 17 TTGI1 HEAT-SHRINKABE MV INDOOR TERMINATION FOR SINGE CORE POYMERIC CABES WITH Cu WIRE OR TAPE SCREEN 18 TTGE1 HEAT-SHRINKABE MV OUTDOOR TERMINATION FOR SINGE CORE POYMERIC CABES WITH Cu WIRE OR TAPE SCREEN 19 TTGI1 ZI HEAT-SHRINKABE MV INDOOR TERMINATION FOR SINGE CORE POYMERIC CABES WITH Cu WIRE OR TAPE SCREEN, AWA ARMORED 20 TTGE1 ZI HEAT-SHRINKABE MV OUTDOOR TERMINATION FOR SINGE CORE POYMERIC CABES WITH Cu WIRE OR TAPE SCREEN, AWA ARMORED 21 TTGI3 W HEAT-SHRINKABE MV INDOOR TERMINATION FOR THREE CORE POYMERIC CABES With STA OR SWA ARMOR 22 TTGE3 W HEAT-SHRINKABE MV OUTDOOR TERMINATION FOR THREE CORE POYMERIC CABES With STA OR SWA ARMOR 23 TTCI3 W Heat-Shrinkable MV indoor terminations for belted PIC cables With armor 24 TTCE3 W Heat-Shrinkable MV outdoor terminations for belted PIC cables With armor 25 TTGIC3 W Heat-Shrinkable MV indoor terminations for paper insulated individually lead sheathed cables 26 TTGEC3 W Heat-Shrinkable MV outdoor terminations for paper insulated individually lead sheathed cables 27 TK Heat-Shrinkable trifurcations kits for MV APPICATIONS 28 15

18 MONOi Heat-Shrinkable MV INDOOR TERMINATIONS FOR SInGE CORE POYMERIC CABES WITH Cu WIRE OR TAPE SCREEN Up to 19/33 (36) kv The MONOi terminations are a single component solution, for single core polymeric cables. Technical description The MONOi indoor terminations are designed for max system voltages of 36 kv, for compact switchgears as well as for installations where space is limited. Easy, quick to install, reducing installation time and errors. The kit consists of a stress control mastic strip, a co extruded dual wall tube and red anti-tracking sealing mastic. Add on kit for armored cables are available separately. Each MONOi termination kit contains material to allow for 3 phase installation. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range (mm 2 ) 12 3x12MONOi x12MONOi x12MONOi x12MONOi x24MONOi x24MONOi x24MONOi x24MONOi x36MONOi x36MONOi x36MONOi x36MONOi For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Trifurcating kits TK available separately. Please see available sizes of specific catalogue page. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various lug s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 16

19 MONOe Heat-Shrinkable MV OUTDOOR TERMINATIONS FOR SInGE CORE POYMERIC CABES WITH Cu WIRE OR TAPE SCREEN Up to 19/33 (36) kv The MONOe terminations are a single component solution, for single core polymeric cables. Technical description The MONOe outdoor terminations are designed for max system voltages of 36 kv. Easy, quick to install, reducing installation time and errors. The kit consists of a stress control mastic strip, a co extruded dual wall tube, red anti-tracking sealing mastic and anti-tracking rain sheds. Add on kit for armored cables are available separately. Each MONOe termination kit contains material to allow for 3 phase installation. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range (mm 2 ) 12 3x12MONOe x12MONOe x12MONOe x12MONOe x24MONOe x24MONOe x24MONOe x24MONOe x36MONOe x36MONOe x36MONOe x36MONOe Designed for outdoor application. For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Trifurcating kits TK available separately. Please see available sizes of specific catalogue page. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various lug s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 17

20 TTGI1 HEAT-SHRINKABE MV INDOOR TERMINATION FOR SINGE CORE POYMERIC CABES WITH Cu WIRE OR TAPE SCREEN Up to 20,8/36 (42) kv TTGI1 heat-shrinkable medium voltage terminations are designed for single core unarmored plastic insulated cables with Cu wire/tape screen. Technical description The TTGI indoor terminations utilize stress control tubing together with stress control mastic to control the electric field. The lug, mechanical or crimp, is covered with anti-tracking mastic to create complete environmental seal. Anti-tracking mastic is also used to seal the earth connection at the bottom of the termination. GT2 anti-tracking tube completes the termination. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range (mm 2 ) 17 17TTGI1.50i TTGI1.120i TTGI1.300i TTGI1.630i TTGI1.1200i TTGI1.1600i TTGI1.95i TTGI1.240i TTGI1.630i TTGI1.1200i TTGI1.150i TTGI1.300i TTGI1.630i TTGI1.1200i TTGI1.150i TTGI1.300i TTGI1.400i TTGI1.630i TTGI1.1000i For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Trifurcating kits TK available separately. Please see available sizes of specific catalogue page. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various lug s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 18

21 TTGE1 HEAT-SHRINKABE MV OUTDOOR TERMINATION FOR SINGE CORE POYMERIC CABES WITH Cu WIRE OR TAPE SCREEN Up to 20,8/36 (42) kv TTGI1 heat-shrinkable medium voltage terminations are designed for single core unarmored plastic insulated cables with Cu wire/tape screen. Technical description The TTGE outdoor terminations utilize stress control tubing together with stress control mastic to control the electric field. The lug, mechanical or crimp, is covered with anti-tracking mastic to create complete environmental seal. Anti-tracking mastic is also used to seal the earth connection at the bottom of the termination. GT2 anti-tracking tube and anti-tracking rain sheds complete the termination. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range (mm 2 ) 17 17TTGE1.50i TTGE1.120i TTGE1.300i TTGE1.630i TTGE1.1200i TTGE1.1600i TTGE1.95i TTGE1.240i TTGE1.630i TTGE1.1200i TTGE1.150i TTGE1.300i TTGE1.630i TTGE1.1200i TTGE1.150i TTGE1.300i TTGE1.400i TTGE1.630i TTGE1.1000i Designed for outdoor application. For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Trifurcating kits TK available separately. Please see available sizes of specific catalogue page. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various lug s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 19

22 TTGI1 ZI HEAT-SHRINKABE MV INDOOR TERMINATION FOR SINGE CORE POYMERIC CABES WITH Cu WIRE OR TAPE SCREEN, AWA ARMORED Up to 20,8/36 (42) kv TTGI1 ZI heat-shrinkable medium voltage indoor terminations for single core plastic insulated cables with either Cu wire screen or Cu tape screen with aluminium wire armour. Technical description The TTGI indoor terminations utilize stress control tubing with stress grading mastic to control the electric field. The cut of the semi-conductive screen on the termination is covered by stress control mastic strip, acting as both stress control and void filler. The stress control tubing completes the control of the electric field. The lug, mechanical or crimped, is covered with anti-tracking mastic to create complete environmental seal. Anti-tracking mastic is also used to seal the earth/ armor connection. GT2 anti-tracking tube completes the termination and covers armor connection. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range (mm 2 ) 17 17TTGI1.50Zi TTGI1.150Zi TTGI1.400Zi TTGI1.630Zi TTGI1.1000ZI TTGI1.95Zi TTGI1.185Zi TTGI1.400Zi TTGI1.630Zi TTGI1.1000ZI TTGI1.120Zi TTGI1.300Zi TTGI1.630Zi TTGI1.1000Zi TTGI1.120Zi TTGI1.300Zi TTGI1.630Zi TTGI1.1000Zi For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Trifurcating kits TK available separately. Please see available sizes of specific catalogue page. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various lug s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 20

23 TTGE1 ZI HEAT-SHRINKABE MV OUTDOOR TERMINATION FOR SINGE CORE POYMERIC CABES WITH Cu WIRE OR TAPE SCREEN, AWA ARMORED Up to 20,8/36 (42) kv TTGE1 ZI heat-shrinkable outdoor terminations are designed for single core plastic insulated cables with Cu wire or tape screen and aluminium wire armouring. Technical description The TTGE outdoor terminations utilize stress control tubing with stress grading mastic to control the electric field. The cut of the semi-conductive screen on the termination is covered by stress control mastic strip, acting as both stress control and void filler. The stress control tubing completes the control of the electric field. The lug, mechanical or crimped, is covered with anti-tracking mastic to create complete environmental seal. Anti-tracking mastic is also used to seal the earth/ armor connection. GT2 anti-tracking tube completes the termination and covers armor connection. Rain sheds are included in the kit. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range (mm 2 ) 17 17TTGE1.50Zi TTGE1.150Zi TTGE1.400Zi TTGE1.630Zi TTGE1.1000zi TTGE1.95Zi TTGE1.185Zi TTGE1.400Zi TTGE1.630Zi TTGE1.1000Zi TTGE1.120Zi TTGE1.300Zi TTGE1.630Zi TTGE1.1000Zi TTGE1.120Zi TTGE1.300Zi TTGE1.630Zi TTGE1.1000Zi Designed for outdoor application. For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Trifurcating kits TK available separately. Please see available sizes of specific catalogue page. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various lug s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 21

24 TTGI3 W HEAT-SHRINKABE MV INDOOR TERMINATION FOR THREE CORE POYMERIC CABES W. STA OR SWA ARMOR Up to 20,8/36 (42) kv TTGI3 W heat-shrinkable indoor terminations are designed for armored three core plastic insulated cables with Cu wire or tape screen. Technical description The TTGI indoor terminations utilize stress control tubing together with stress control mastic to control the electric field. The lug, mechanical or crimp, is covered with anti-tracking mastic to create a complete environmental seal. Non tracking breakout seals the cable crutch area. Anti-tracking mastic is used to seal the earth and armour connection at the bottom of the termination. GT2 anti-tracking tube completes the termination. Right angle or straight heat-shrinkable boots are available on request. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range (mm 2 ) 7,2 6TTGI3.50W ,2 6TTGI3.150W ,2 6TTGI3.240W TTGI3.50W TTGI3.120W TTGI3.300W TTGI3.630W TTGI3.95W TTGI3.240W TTGI3.630W TTGI3.120W TTGI3.300W TTGI3.400W TTGI3.120W TTGI3.300W TTGI3.400W TTGI3 & 24TTGI3 36TTGI3 X For cables with A foil screen/ vapor screen please contact our sales office. Earth kit included for cables with tape screens. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Various tail length exist, please check requirements of your end customer and inform our sales office accordingly. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various lug s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 22

25 TTGE3 W HEAT-SHRINKABE MV OUTDOOR TERMINATION FOR THREE CORE POYMERIC CABES W. STA OR SWA ARMOR Up to 20,8/36 (42) kv TTGE3 W heat-shrinkable outdoor terminations are designed for armored three core plastic insulated cables with Cu wire or tape screen. Technical description The TTGE outdoor terminations utilize stress control tubing together with stress control mastic to control the electric field. The lug, mechanical or crimp, is covered with anti-tracking mastic to create complete environmental seal. Non tracking breakout seals the cable crutch area. Anti-tracking mastic is used to seal the earth and armour connection at the bottom of the termination. GT2 anti-tracking tube and DPA anti-tracking rain sheds complete the termination. Type tested acc.: Cenelec HD S2 IEC TTGE3 24TTGE3 36TTGE3 voltage Um kv application range (mm 2 ) 7,2 6TTGE3.50W ,2 6TTGE3.150W ,2 6TTGE3.240W TTGE3.50W TTGE3.120W TTGE3.300W TTGE3.630W TTGE3.95W TTGE3.240W TTGE3.630W TTGE3.120W TTGE3.300W TTGE3.400W TTGE3.120W TTGE3.300W TTGE3.400W X Designed for outdoor application. For cables with A foil screen/ vapor screen please contact our sales office. Earth kit included for cables with tape screens. Earth kit included for cables with wire screens. For other cable s please contact Various tail length exist, please check Various earth connection design our sales office. requirements of your end solutions exist for customer and inform our armoring. For exact sales office accordingly. details contact our sales office. Design accommodates various lug s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 23

26 TTCI3 W Heat-Shrinkable MV indoor terminations for belted PIC cables w. armor Up to 8,7/15 (17,5) kv TTCI3 W heat-shrinkable indoor terminations for three core armored MIND/PIC belted paper cables up to 17kV. Technical description The cables cores are covered with oil resistant tubing. The crotch area and gaps are filled and covered with stress grading mastic. A 3 finger semi-conductive breakout then covers the crotch. Stress grading mastic is applied over the breakout fingers, covered by stress control tubing. GT2 anti-tracking tubes covers each core and the lugs. Anti-tracking mastic is applied over the lugs, earthing and armour. The environmental seal of the armour connection is made with GT3 adhesive lined, medium wall tubing. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range (mm 2 ) 17 17TTCI3.50W TTCI3.120W TTCI3.300W X For other cable s please contact our sales office. Various tail length exist, please check requirements of your end customer and inform our sales office accordingly. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various lug s. 24

27 TTCE3 W Heat-Shrinkable MV outdoor terminations for belted PIC cables w. armor Up to 8,7/15 (17,5) kv TTCE3 W heat-shrinkable outdoor terminations for three core armored MIND/PIC belted paper cables up to 17kV Technical description The cables cores are covered with oil resistant tubing. The crotch area and gaps are filled and covered with stress control mastic. A 3 finger semi-conductive breakout then covers the crotch. Stress control mastic is applied over the breakout fingers, covered by stress control tubing. Anti-tracking mastic is applied over the lugs, earthing and armour. GT2 anti-tracking tubes covers each core and the lugs. Anti-tracking rain sheds are applied on each core to complete the termination. The environmental seal of the armour connection is made with GT3 adhesive lined medium wall tubing. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range (mm 2 ) 17 17TTCE3.50W TTCE3.120W TTCE3.300W X Designed for outdoor application. For other cable s please contact our sales office. Various tail length exist, please check requirements of your end customer and inform our sales office accordingly. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various lug s. 25

28 TTGIC3 W Heat-Shrinkable MV indoor terminations for paper insulated individually lead sheathed cables Up to 19/33 (36) kv TTGIC3 W heat-shrinkable indoor terminations are designed for MIND individually lead sheathed cables with armour. Technical description The cables cores are prepared, the lead sheath is exposed and earthed. The stress grading mastic covers the screen cut area onto the paper insulation. The lug is covered with silicone rubber tape. Oil resistant tubing covers the cores. Silicone rubber tape is used to block oil migration at the top and bottom of oil resistant tubing. Stress control tubing is placed over oil barrier tube overlapping onto the lead sheath. The crotch area and gaps are filled and covered with anti-tracking red mastic. The crotch is covered with anti-tracking trifurcating breakout. GT2 anti-tracking tubes covers the cores and additional GT2 tube is used for lug sealing. Armor and earth connection are included in the kit. Type tested acc.: Cenelec HD S2 IEC TTGIC3 36TTGIC3 voltage Um kv application range (mm 2 ) 24 24TTGIC3.95W TTGIC3.240W TTGIC3.400W TTGIC3.120W TTGIC3.300W TTGIC3.400W For cables with metallized paper screen and common lead sheath, please contact our sales representative. X For other cable s please contact our sales office. Various tail length exist, please check requirements of your end customer and inform our sales office accordingly. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various lug s. 26

29 TTGEC3 W Heat-Shrinkable MV outdoor terminations for paper insulated individually lead sheathed cables Up to 19/33 (36) kv TTGEC3 W heat-shrinkable outdoor terminations are designed for MIND individually lead sheathed cables with armour. Technical description The cables cores are prepared, the lead sheath is exposed and earthed. The stress grading mastic covers the screen cut area onto the paper insulation. The lug is covered with silicone rubber tape. Oil resistant tubing covers the cores. Silicone rubber tape is used to block oil migration at the top and bottom of oil resistant tubing. Stress control tubing is placed over oil barrier tube overlapping onto the lead sheath. The crotch area and gaps are filled and covered with anti-tracking red mastic and is covered with a 3 finger anti-tracking breakout. GT2 anti-tracking tubes protects the cores and additional GT2 tube is used for lug sealing. Anti-tracking rain sheds are applied. Armor and earth connection are included in the kit. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range (mm 2 ) 24 24TTGEC3.95W TTGEC3.240W TTGEC3.400W TTGEC3.120W TTGEC3.300W TTGEC3.400W For cables with metallized paper screen and common lead sheath, please contact our sales representative. X Designed for outdoor application. For other cable s please contact our sales office. Various tail length exist, please check requirements of your end customer and inform our sales office accordingly. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various lug s. 27

30 TK Heat-Shrinkable trifurcations kits FOR MV APPICATIONS Up to Umax 19/33 (36) kv Designed to accommodate various single or three core cable terminations. Technical description The TK/1 kit consists of an anti-tracking breakout for the cable crotch area, 3pcs of GT2 anti-tracking tubes cover the cores. The TK kit has the same components like TK/1 but has additional earth kit included for the armor. TK/1 Unarmored cables TK Armored cables Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range (mm 2 ) 12/ TK1 - TK1/ TK2 - TK2/ TK3 - TK3/ TK4 - TK4/ TK1 - TK1/ TK2 - TK2/ TK3 - TK3/ TK4 - TK4/ TK1 - TK1/1 50 TK2 - TK2/ TK3 - TK3/ TK4 - TK4/ X Various tail length exist, please check requirements of your end customer and inform our sales office accordingly. Contact our sales office for selecting exact breakout. For other cable s please contact our sales office. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Various earth connection kits are available for screen connection. For exact details contact our sales office. 28

31 MEDIUM VOtaGE joints Index products Page GTS1 W Heat-Shrinkable mv straight joints for unarmored single core Polymeric cables with Cu wire or tape screen 30 GTS1 KZ Heat-Shrinkable mv straight joints for AWA armored single core Polymeric cables with Cu wire or tape screen 31 GTS3 W Heat-Shrinkable mv straight joints for three core Polymeric cables without armor 32 GTS3 K Heat-Shrinkable mv straight joints for three core POYMERIC CABES WITH ARMOR 33 GTS3.1 W HEAT-SHRINKABE MV TRANSITION JOINTS FOR 3X SINGE CORE POYMERIC TO THREE CORE POYMERIC CABES WITHOUT ARMOR 34 GTC3 K/KB Heat-Shrinkable mv straight joints for paper insulated (MIND, belted), common lead sheathed with armor GTC3 K, or individually lead sheated cables GTC3 KB 35 GTM3 K/KB Heat-Shrinkable MV TRANSITION JOINTS FROM 3x SINGE CORE POYMERIC CABES TO 3x MIND (PIC) COMMON EAD SHEATHED ARMORED CABES GTM3 K, OR INDIVIDUAY EAD SHEATHED CABES GTM3 KB 36 GTM3.1 w HEAT-SHRINKABE MV TRANSITION JOINTS FOR 3X SINGE CORE POYMERIC CABES TO THREE CORE MIND (PIC) WITHOUT ARMOR 37 GRS1 Taped, resin injected straight through joints for unarmored MV single core POYMERIC cables 38 GRS3 Taped, resin injected straight through joints for unarmored MV THREE core POYMERIC cables 39 29

32 GTS1 W Heat-Shrinkable mv straight joints for unarmored single core POYMERIC cables with Cu wire or tape screen up to Umax 20,8/36 (42) kv GTS1 heat-shrinkable straight joints are designed for unarmored, plastic insulated cables with Cu wire or tape screen, to accommodate either crimped or mechanical connectors. Technical description Strips of black mastic are used to fill the gap between the connector and the cable insulation. The screen cut and connector are covered by stress grading mastic. Stress control tubing covers and overlaps the connector and screen cut area. Dual wall screened insulating tube restores the insulation and screen, up to 24kV. For voltages 36 & 42kV an additional GT2 insulating tubing is applied over the stress control tubing. The outer sheath is restored with medium or heavy wall adhesive lined tubing depending on the market and customer specifications. Screen connection material is included in the kit. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range sez. (mm 2 ) 17 17GTS1.95W GTS1.240W GTS1.630W GTS1.1000W GTS1.1600W GTS1.50W GTS1.240W GTS1.400W GTS1.1000W GTS1.95W GTS1.240W GTS1.500W GTS1.800W GTS1.1200W GTS1.95W GTS1.240W GTS1.400W GTS1.630W GTS1.1000W For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Please contact our sales office when inquiring joints for same cables with different cross sections. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various connector/ferrule s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 30

33 GTS1 KZ Heat-Shrinkable mv straight joints for AWA armored single core POYMERIC cables with Cu wire or tape screen up to Umax 20,8/36 (42) kv GTS1 KZ heat-shrinkable straight joints are designed for armored, plastic insulated cables with Cu wire or tape screen, to accommodate either crimped or mechanical connectors. Technical characteristics Strips of black mastic are used to fill the gap between the connector and the cable insulation. The screen cut and connector are covered by stress grading mastic. The joint body consists of two tubes. Stress control tubing covers and overlaps the connector and screen cut area. Dual wall screened insulating tube restores the insulation and screen, up to 24kV. For voltages 36 & 42kV an additional GT2 insulating tubing is applied over the stress control tubing. The outer sheath is restored with medium or heavy wall adhesive lined tubing depending on the market and customer specifications. Screen connection and armor continuity (canister) are included in the kit. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range sez. (mm 2 ) 17 17GTS1.35KZ GTS1.185KZ GTS1.400KZ GTS1.630KZ GTS1.1000KZ GTS1.70KZ GTS1.120KZ GTS1.240KZ GTS1.500KZ GTS1.800KZ GTS1.1000KZ GTS1.50KZ GTS1.120KZ GTS1.300KZ GTS1.630KZ GTS1.800KZ GTS1.95KZ GTS1.240KZ GTS1.630KZ GTS1.800KZ For cables with A foil screen/ vapor screen please contact our sales office. Earth kit included for cables with tape screens. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Please contact our sales office when inquiring joints for same cables with different cross sections. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various connector/ferrule s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 31

34 Heat-Shrinkable mv straight joints for three core POYMERIC cables without armor Up to 20,8/36 (42) kv GTS3 W The GTS3 W joints are designed to connect unarmored cables with extruded insulations up to 42kV with Cu wire or tape screen. Technical description The screen cut areas and connectors, crimp or shear bolt are covered with a void filling, stress grading mastic. Stress control tubing covers the connector and overlaps the screen cut. Dual wall screened insulating tubing completes the joint body for voltage levels up to 24kV. 36kV & 42kV kits will include an additional GT2 insulating tube. The cable outer sheath is rebuilt with either medium or heavy wall tubing depending on market specifications. Screen connection material is included in the kit. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range sez. (mm 2 ) 17 17GTS3.95W GTS3.240W GTS3.400W GTS3.50W GTS3.240W GTS3.400W GTS3.95W GTS3.240W GTS3.400W GTS3.95W GTS3.240W GTS3.400W For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Please contact our sales office when inquiring joints for same cables with different cross sections. Design accommodates various connector/ferrule s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 32

35 GTS3 K Heat-Shrinkable mv straight joints for three core POYMERIC CABES WITH ARMOR Up to 20,8/36 (42) kv The GTS3 K joints are designed to connect various s of armored cables with extruded insulations up to 42kV with Cu wire or tape screen. Technical characteristics The screen cut areas and connectors, crimp or shear bolt are covered with a void filling, stress grading mastic. Stress control tubing covers the connector and overlaps the screen cut. Dual wall screened insulating tubing completes the joint body for voltage levels up to 24kV. 36kV & 42kV kits will include an additional GT2 insulating tube. The cable outer sheath is rebuilt with either medium or heavy wall tubing depending on market specifications. Screen connection and armor continuity material whether SWA, STA, DSTA are included in the kit. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range sez. (mm 2 ) 17 17GTS3.95K GTS3.240K GTS3.400K GTS3.50K GTS3.240K GTS3.400K GTS3.95K GTS3.240K GTS3.400K GTS3.95K GTS3.240K GTS3.400K For cables with A foil screen/ vapor screen please contact our sales office. Earth kit included for cables with tape screens. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Please contact our sales office when inquiring joints for same cables with different cross sections. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various connector/ferrule s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 33

36 GTS3.1 W HEAT-SHRINKABE MV TRANSITION JOINTS FOR 3X SINGE CORE POYMERIC TO THREE CORE POYMERIC CABES with or WITHOUT ARMOR Up to 20,8/36 (42) kv GTS3.1 W joints are designed to connect armored or unarmored 3x core cables to 3x single core. Technical characteristics The cables are prepared and aligned. Stress grading mastic covers the screen cut area and the connector, that can be either crimp or mechanical. Stress control and dual wall screened insulating tubing complete the joint body. Screening is restored on each core. The outer protection is restored with adhesive lined medium or heavy wall tubing, and an additional insulating breakout seals the three single core cable side. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range sez. (mm 2 ) 17 17GTS3.1.95W GTS W GTS W GTS3.1.50W GTS W GTS W GTS3.1.95W GTS W GTS W GTS3.1.50W GTS W GTS W For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Please contact our sales office when inquiring joints for same cables with different cross sections. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various connector/ferrule s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 34

37 GTC3 K/KB Heat-Shrinkable mv straight joints for THREE Core paper insulated (MIND, belted), common lead sheathed with armor GTC3 K, or individually lead sheated cables GTC3 KB Up to 19/33 (36) kv The GTC3 joints are designed to for belted MIND insulated cables with common lead sheath or individually lead sheathed cables with amour up to Umax 36kV. Technical characteristics The joint construction converts the cables into plastic insulated cables with oil resistant tubing that cover the cores. The screen cut area, gaps, and the connector is covered with stress grading mastic. Stress control tube and screened insulating tube is used to make the joint body. The 36kV joint has an additional insulating tube added to the kit. Screening and armoring is restored, armour kits will vary depending on the cable construction. The joint is covered with medium or heavy wall adhesive lined tubing depending on market requirements. The KB joints are designed for HS cables with 3 lead sheaths. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range sez. (mm 2 ) 17 17GTC3.95K GTC3.120K GTC3.240K GTC3.400K GTC3.50K GTC3.240K GTC3.400K GTC3.95K GTC3.240K GTC3.400K GTC3.50KB GTC3.240KB GTC3.400KB GTC3.95KB GTC3.240KB GTC3.400KB For other cable s please contact our sales office. Please contact our sales office when inquiring joints for same cables with different cross sections. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various connector/ferrule s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 35

38 GTM3 K/KB Heat-Shrinkable MV TRANSITION JOINTS FROM 3x SINGE CORE POYMERIC CABES TO 3x MIND (PIC) COMMON EAD SHEATHED ARMORED CABES GTM3 K, OR INDIVIDUAY EAD SHEATHED CABES GTM3 KB Up to 19/33 (36) kv GTM3 transition joints are designed to connect 3 core cables with extruded insulation to 3 core lead sheathed MIND (PIC) paper insulated cables with or without armor. Technical characteristics The paper side is converted to plastic cable, utilizing an oil resistant tube a conductive tubing and 3 finger conductive breakout. The connectors, either crimp or shear bolt as well as the screen cut area are covered by stress grading mastic. Stress control and dual wall screened insulating tube complete the joint body. An additional insulating tube is added for 36kV and above. Shielding is restored on the joint. Canister rebuilds the mechanical protection for armored cables. The outer jacket is restored with either medium or heavy wall adhesive coated tubing depending on market specification. The KB joints are designed for HS cable with 3 lead sheaths. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range sez. (mm 2 ) 17 17GTM3.95K GTM3.240K GTM3.400K GTM3.50K/KB GTM3.240K/KB GTM3.400K/KB GTM3.95K/KB GTM3.240K/KB GTM3.400K/KB For cables with A foil screen/ vapor screen please contact our sales office. Earth kit included for cables with tape screens. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Please contact our sales office when inquiring joints for same cables with different cross sections. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various connector/ferrule s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 36

39 GTM3.1 W HEAT-SHRINKABE MV TRANSITION JOINTS FOR 3X SINGE CORE POYMERIC CABES TO THREE CORE MIND (PIC) with or WITHOUT ARMOR Up to 19/33 (36) kv GTM3.1W transition joints are designed to connect 3 single core extruded insulation cables to 3 core MIND (PIC) paper insulated cables belted up to Umax 36kV with or without armor. Technical characteristics The paper side is converted to plastic cable, utilizing an oil resistant tube a conductive tubing and 3 finger conductive breakout. The connectors, either crimp or shear bolt as well as the screen cut area are covered by stress grading mastic. Stress control and dual wall screened insulating tube complete the joint body. Shielding is restored on the joint. The outer jacket is restored with either medium or heavy wall adhesive coated tubing while an insulating 3 finger breakout seals the joint on the single core side. Type tested acc.: Cenelec HD S2 IEC voltage Um kv application range sez. (mm 2 ) 17 17GTM3.1.95W GTM W GTM W GTM3.1.50W GTM W GTM W GTM3.1.95W GTM W GTM W For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Please contact our sales office when inquiring joints for same cables with different cross sections. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various connector/ferrule s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 37

40 GRS1 Taped, resin injected straight through joints for unarmored MV single core POYMERIC cables Up to 19/33 (36) kv GRS1 is a tape insulated joint with injected resin outer protection designed for unarmored plastic insulated cables. Technical description NGS semi-conductive rubber tape covers the connector. NGA tape is used to build up the insulation thickness over the connector and the cores till the Cu screen wires. NS spacer tape is applied to accommodate the resin. NCT and NVC tapes create the outer protective layer. Epoxy resin is used to fill the joint. Meets specifications CEI 20-62/1 Cenelec HD S2 voltage Um kv application range sez. (mm 2 ) 24 24GRS GRS GRS For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Please contact our sales office when inquiring joints for same cables with different cross sections. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various connector/ferrule s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 38

41 GRS3 Taped, resin injected straight through joints for unarmored MV THREE core POYMERIC cables Up to Umax Up to 19/33 (36) kv GRS3 is a tape insulated, injected resin joint. Designed to accomodate 3 core unarmored cables with extruded insulation. Technical description NGS semi-conductive rubber tape covers the connector. NGA tape is used to build up the insulation thickness over the connector and the cores till the Cu screen wires. NS spacer tape is applied to accommodate the resin. NCT and NVC tapes create the outer protective layer. Epoxy resin ISM45G is used to fill the joint. Meets specifications CEI 20-62/1 Cenelec HD S2 voltage Um kv application range sez. (mm 2 ) 24 24GRS3.95VT GRS3.240VT GRS3.300VT GRS3.240VT For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Please contact our sales office when inquiring joints for same cables with different cross sections. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various connector/ferrule s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 39

42 40

43 low High Voltage Product Index Pag. 52TTGI1 Heat-Shrinkable indoor termination for HV unarmored Polymeric cables with Cu wire / tape screen 44 52TTGE1 Heat-Shrinkable outdoor termination for HV unarmored Polymeric cables with Cu wire / tape screen 45 52GTS1 Heat-Shrinkable straight joints for HV unarmored single core Polymeric cables WITH Cu WIRE / TAPE SCREEN 46 41

44 52TTGI1 Heat-Shrinkable indoor termination for HV unarmored POYMERIC cables with Cu wire / tape screen Up to 26/45 (52) kv The 52TTGI1 heat-shrinkable indoor terminations are designed for plastic or EPR insulated cables with Cu wire screen or Cu tape screen. Technical description A stress control patch is applied at the screen cut of the termination and helps to control the field together with stress control tubing. Semiconductive tubing creates a bridge for leakage currents placed onto and covering the screen wires or earth braid. Another layer of stress control mastic covers the top end of the semiconductive tubing. Red anti-tracking mastic is wrapped onto the top end of the tubing. The lug and cable outer sheath is sealed with anti-tracking mastic. Heavy wall anti-tracking tube and anti-tracking rain sheds complete the termination. Meets specifications: IEC voltage Um kv application range (mm 2 ) 52 52ttGI1.50i ttGI1.95i ttGI1.150i ttGI1.240i ttGI1.400i ttGI1.630i ttGI1.1000i For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Trifurcating kits TK available separately. Please see available sizes of specific catalogue page. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various lug s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 42

45 52TTGE1 Heat-Shrinkable outdoor termination for HV unarmored POYMERIC cables with Cu wire / tape screen Up to 26/45 (52) kv The 52TTGE1 heat-shrinkable outdoor terminations are designed for plastic or EPR insulated cables with Cu wire screen or Cu tape screen. Technical description A stress control patch is applied at the screen cut of the termination and helps to control the field together with stress control tubing. Semi-conductive tubing creates a bridge for leakage currents placed onto and covering the screen wires or earth braid. An other layer of stress control mastic covers the top end of the semiconductive tubing. Red anti-tracking mastic is wrapped onto the top end of the tubing. The lug and cable outer sheath is sealed with anti-tracking mastic. Heavy wall anti-tracking tube and anti-tracking rain sheds complete the termination. Meets specifications: IEC voltage Um kv application range (mm 2 ) 52 52ttGe1.50i ttGe1.95i ttGe1.150i ttGe1.240i ttGe1.400i ttGe1.630i ttGe1.100i Designed for outdoor application. For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Trifurcating kits TK available separately. Please see available sizes of specific catalogue page. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various lug s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 43

46 52GTS1 Heat-Shrinkable straight joints for HV unarmored single core POYMERIC cables with Cu wire / tape screen Up to 26/45 (52) kv 52GTS1 straight joint are designed for unarmored plastic or HEPR insulated cables with Cu wire screen. Technical characteristics NGS semi-conductive tape is used to fill the gaps, cover the connector. The screen cut on both sides are covered with stress grading mastic plates as well as the connector area. The joint body consists of a stress control tubing, an insulating, heavy wall tubing and finally heavy dual wall screened insulating tube. The outer sheath is restored with GT4 adhesive lined heavy wall tubing. Meets specifications: IEC voltage Um kv application range (mm 2 ) 52 52GTS1.50i GTS1.95i GTS1.150i GTS1.240i GTS1.400i GTS1.630i GTS1.1000i For cables with A foil screen/ vapor screen please contact our sales office. Please add a the letter A at the end of the product code for cables with Cu tape screen. Earth kit included for cables with wire screens. For other cable s please contact our sales office. Please contact our sales office when inquiring joints for same cables with different cross sections. Various earth connection design solutions exist for armoring. For exact details contact our sales office. Design accommodates various connector/ferrule s. Various earth connection kits are available for screen connection. For exact details contact our sales office. 44

47 Smart terminations Product index TT24 In air smart termination equipped with sensors for the metering of MV networks 46 ST400TB Smart connector equipped with sensors for the metering of MV networks 47 VS24C Sensors used for metering voltage on MV networks 48 CS300 Sensors used for metering current rate on MV networks 49 45

48 TT24 In air smart termination equipped with sensors for the metering of MV networks Up to 12/20 (24) kv Description The Nexans KTT-VS24C-CS300 is an In Air Smart Termination equipped with voltage and current sensors, to be used indoors. The KTT-VS24C-CS300 is suitable for MV power networks up to 24 kv (10,15 and 20kV networks). Installation: The KTT-VS24C-CS300 has been designed to be easly installed on MV/V switchgears (new installation or retrofit). Technical description The KTT-VS24C-CS300 is made of : a slip-on termination (no heating source required for the installation on the cable) an EPDM cross-connector receiving : a VS 24 C voltage sensor a CS300 current sensor Sensors have to be linked to a specific modem (SACOMUT box from Nexans, for example) so that values can be converted for the management software (in development). Please feel free to contact us for further details. Meets specifications: International HD S2 Contact Nexans Power Accessories France Phone: +33 (0) nexans.npa.france@nexans.com 46

49 ST400TB Smart connector equipped with sensors for the metering of MV networks Up to 12/20 (24) kv Description The Nexans SK400TB-VS24C-CS300 is a smart connector equipped with voltage and current sensors. The SK400TB-VS24C-CS300 is suitable for MV power networks up to 24 kv (10,15 and 20kV networks). Installation: The SK400TB-VS24C-CS300 has been designed to be easly installed on MV/V switchgears or transformers (new installation or retrofit), and is compatible with C interface bushings (as per Cenelec standard). Technical description The SK400TB-VS24C-CS300 is made of : a 400 TB connector a VS 24 C voltage sensor a CS300 current sensor Sensors have to be linked to a specific modem (SACOMUT box from Nexans, for example) so that values can be converted for the management software (in development). Please feel free to contact us for further details. Meets specifications: International HD S2 INTERFACE C ( A) Contact Nexans Power Accessories France Phone: +33 (0) nexans.npa.france@nexans.com 47

50 VS24C Sensors used for metering voltage on MV networks Up to 12/20 (24) kv Description Nexans VS 24 C voltage sensor is a component dedicated to the metering of MV networks, to be integrated in Nexans smart accessories. The VS 24 C has been designed to be used with EN50180 C interfaces. Installation: It has been designed to be easily assembled on separable connectors, and to be installed in MV/V transformers and switchgears, or even on a pillar climbing line. The VS 24 C has to be linked to a specific modem through RJ45 cables (SACOMUT box from Nexans, for example), so that values can be converted for a management software. Technical description VS 24 C is an active MV voltage instrument transformers based on capacitive voltage divider principle. It requires power feeding (can be provided by the SACOMUT box). They are factory adjusted for metrology and do not require any further adjustment. Please feel free to contact us for further details. Meets specifications: International EN 50180; IEC Selling information The VS 24 C is available only assembled on a smart accessory (TT24, ST 400 TB,...) Contact Nexans Power Accessories France Phone: +33 (0) nexans.npa.france@nexans.com 48

51 CS300 Sensors used for metering current rate on MV networks Up to 12/20 (24) kv Description Nexans CS300 current sensor is a component dedicated to the metering of MV lines, and to be integrated in Nexans smart accessories. The CS300 is available and suitable for multiple connectors assembly designs and prebuild jumpers. Installation: It has been designed to be easily assembled on separable connectors or cable terminations, mainly in MV/V transformers and switchgears, or even on a pillar climbing line. The CS 300 has to be linked to a specific modem through coaxial cable (SACOMUT box from Nexans, for example) so that values can be translated for the management software (in development). Technical description Current rate values given by the CS300 are highly sharp (Class 0,5 S) and compatible with PC couplers (also developped by Nexans). The CS300 sensor is a passive equipment, and do not require power feeding. Please feel free to contact us for further details. Meets specifications: International IEC Selling information The CS300 is available only assembled on a smart accessory (TT 24, ST 400 TB,...) Contact Nexans Power Accessories France Phone: +33 (0) nexans.npa.france@nexans.com 49

52 50

53 RESINS Product index isbe Epoxy Resin 53 ism g(m) Epoxy Resin 53 isbp polyurethane Resin 54 isbpr Re-enterable Polybutadien Resin 54 51

54 RESINS FOR EECTRICA USE EPOXY RESINS Epoxy resins offer good electrical insulating properties combined with superior mechanical protection. They are used as primary insulation for low voltage joints in combination with two half shells as well as providing mechanical protection for MV taped resin joints. They have good adhesion properties to cable outer sheaths as well as metals, like copper, aluminium and lead. The two component resin is supplied in a two chamber mixing bag. POYURETHANE RESINS PUR resins are used in both V and MV jointing applications, due to their versatile characteristics. Design dependent hardness, they all have extremely good hydrophobic properties. Used as insulating material in V cast resin joints and in MV taped joints, due to excellent adhesion to all kinds of cable jacket materials and metals. During curing the PUR resins develop lower heat generation when compared with epoxy. Supplied in two chamber resin bags, or buckets for larger quantities to be mixed with spatula. POYBUTADIENE RESINS The polybutadiene resins have excellent electrical properties. They are used as primary insulation in low voltage joints. They have good adhesion properties on cable outer sheaths and metals, like copper, aluminium and lead. The joint is easily reaccessible and has no hazard labelling. The two component polybutdiene resin is supplied in mixer pack. REACH The NEXANS resins do not contain products included in the SVHC list (REACH regulations). KEY TO THE HAZARD ABES CORROSIVE IRRITATING DANGEROUS FOR THE ENVIRONMENT HARMFU 52

55 ISBE TWO COMPONENT EPOXY Insulating RESIN The ISBE epoxy resin can be utilized as primary insulation, protection and sealing of low voltage resin joints. The resin can be poured or injected with the appropriate tools. The product conforms to, CEI EN50393 (CEI 20-63) and Cenelec HD 623 standards Technical characteristics Colour Black Viscosity at 25 C 3200±300mPa.s Gel time a 23 C 25 min. Pot life 23 C 10 min. Exothermic peak ~150 C Technical characteristic after curing Volume resistivity >10 14 Ohm.cm ASTM D257 Dielectric strength >15 kv/mm IEC243 Dielectric constant < 6 iec250 oss factor < 0,5 iec250 Max operating temperature 100 C Type Quantity per mixer pack (gr.) ISBE ISBE ISBE ISBE ISM G(M) Two Components Epoxy Insulating Resin for MV The ISM GM epoxy resin can be utilized as primary insulation, protection and sealing of low and medium voltage resin joints. The resin can be poured or injected with the appropriate tools. Technical characteristics Colour Black Viscosity at 25 C 3200±300 mpa.s Gel time a 23 C 20±5 min. Pot life a 23 C 10±3 min. Exothermic peak ~170 C Technical characteristic after curing Water absorption <0,2% Dielectric strength >20 kv/mm IEC243 Dielectric constant < 4 iec250 oss factor < 0,06 IEC250 Volume resistivity >1X10 14 Ohm.cm ASTM D257 Max operating temperature 120 C Type Quantity per mixer pack (gr.) ISM45G(M)

56 ISBP Two Components polyurethane Insulating Resin The ISBP polyutethane resin is used as primary insulation, mechanical protection and water sealing for low voltage joints. The product meets the requirements of CENEEC HD 623 (CEI 20-63). Technical characteristics Color Brown 25 C 2000±500 mpa.s Exothermic peak max. 60 C Gel 23 C 25±5 min. Total setting time <6h Technical characteristic after curing Water absorption <0,2% ASTM D570 Dielectric strength >15 kv/mm IEC243 Max operating temperature 120 C Type Quantity per mixer pack (gr.) ISBP ISBPR Two Components Re-enterable POYBUTADIEN Resin The ISBPR re-enterable resin can be utilized as primary insulation, protection and sealing of low voltage resin joints. The resin can easily be removed after curing with standard jointer tools. The resin is kitted in two chamber bags and tested acc. to ACEA & EN50393 specifications. Technical characteristics Color orange Exothermic peak 50 C Pot life 23 C 10±3 min. Gel 23 C 15±3 min. Technical characteristic after curing Water absorption <0,2% ASTM D570 Dielectric strength >15 kv/mm IEC243 Max operating temperature 120 C Type Quantity per mixer pack (gr.) ISBPR

57 HEAT-SHRINKABE ACCESSORIES, TAPES & MASTICS Product Index Page MBA red anti-tracking mastic 56 MNAC Stress Grading Mastic (High K) 56 MACD Stress Control Mastic 57 MACDC Stress Grading Mastic 57 NGAF Sealing Mastic 58 OM Stress Grading Mastic (High K) 58 NGA Self Amalgamating EPR Tape 59 NGS Self-Amalgamating Semi-conductive Tape 59 NAE General Purpose PVC Tape 60 NCV Glass Fiber Reinforced Adhesive Tape 60 NCT Transparent Adhesive/Insulating Tape 61 NS Spacer Tape 61 CACU Tinned Copper Mesh 62 F /F IS Tinned Copper Flexible Braid with or without Insulation 62 M/MO Hose Clamp 63 MS Constant Force Roll Spring 63 NT/FAIS Nylon Cable Tie 64 SKVk Shear Head Mechanical ugs 65 C Shear Head Mechanical ugs 66 D Shear Head Mechanical Connectors 67 M Shear Head Mechanical Connector 68 GT1 J Heat-Shrinkable Stress Control Tube, designed for Cable Joints 69 GT1 T Heat-Shrinkable Stress Control Tube, designed for Cable Joints 70 GT2 Heat-Shrinkable Anti-tracking Tube 71 GT2 S Heat-Shrinkable Heavy Wall Anti-tracking Tube 72 GT2 BB Heat-Shrinkable Bus Bar Insulating Tube 73 GT25 Heat-Shrinkable DUA WA TUBE (OUTER AYER CONDUCTING/INNER AYER INSUATING) 74 GT5 Heat-Shrinkable Semi-Conductive Tube 75 GT10/GT10 F Heat-Shrinkable Oil Resistant Tube 76 GT3 Heat-Shrinkable Medium Wall Insulating Tube with Adhesive 77 GT4 Heat-Shrinkable Heavy Wall Insulating Tube with Adhesive 78 GT7 Heat-Shrinkable Thin Wall Tube w/o Adhesive 79 GT11/GT11 R Heat-Shrinkable Adhesive ined Wrap Around Repair Sleeve 80 36TTS Heat-Shrinkable Semi-Conductive Cable Breakout Adhesive ined 81 36TTE Heat-Shrinkable Anti-Tracking Cable Breakout 82 1TTI Heat-Shrinkable V Insulating Breakout 83 DPA Heat-Shrinkable Anti-Tracking Rain Sheds 84 PTD/PTS Heat-Shrinkable Anti-tracking Right Angle and Straight Bushing Boot 85 CAPT Heat-Shrinkable Cable End Cap with Adhesive 86 55

58 Red anti-tracking mastic MBA is a red colored anti-tracking mastic with good electrical insulating properties used mainly in heat-shrinkable terminations. Ideal for creating an environmental seal between tubing and cable structure. Supplied in strips of various lengths. Anti track property meets ESI and IEC 507 requirements. MBA Technical characteristics Colour Red Tensile strength 1,5 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation >350% astm D-412 / ISO 37 Dielectric constant >3 iec 250 Volume resistivity >1x10 14 Ohm.cm IEC93 Dielectric strength >15kV/mm IEC243 width thickness ength MBA25-0, MBA50x2-0,15 2x50 1,5 150 STRESS GRADING MASTIC (HIGH K) MNAC MNAC stress grading mastic is specially designed to be used in heatshrinkable joints up to 52kV. The mastic is designed specifically to be used on the cable semi-conductive cut, and ferrule area. Technical characteristics Colour light grey Tensile strength >1 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation >200% astm D-412 / ISO 37 Dielectric constant >8-12 iec 250 Volume resistivity >1x10 10 Ohm.cm IEC93 Dielectric strength >10kV/mm IEC243 width thickness ength 56 MNAC30-1x0, MNAC30-2x0, MNAC140-0,22N 140 2,5 220 MNAC140-0,195N 140 2,5 195 MNAC130-0,03N 130 1,2 30 MNAC130-0,11N 130 2,5 110 MNAC130-0,22N 130 2,5 220

59 Stress control mastic MACD is a stress control mastic, specifically designed for terminations, up to 52kV. Available in strips or as mastic plates. MACD Technical characteristics Colour Black Tensile strength >0,3 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation >300% astm D-412 / ISO 37 Dielectric constant 5-10 iec 250 Volume resistivity 1x10 10 Ohm.cm IEC93 Dielectric strength >3kV/mm IEC243 width thickness ength MACD38-0, MACD38-0, MACD110-2x0, MACD110-2x0, MACD130-0,15N 130 2,5 150 MACD140-2x0, MACD180-2x0, Stress grading mastic MACDC stress grading mastic is specifically designed for paper cables up to 52kV. Also performs as a void filler. Available is strips or plates. MACDC Technical characteristics Colour Grey Tensile strength 0,1-0,5 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation >300% astm D-412 / ISO 37 Dielectric constant >9-15 iec 250 Volume resistivity >1x10 9 Ohm.cm IEC93 Dielectric strength >3kV/mm IEC243 width thickness ength MACDC38-0,

60 SEAING MASTIC NGAF NGAF black colored sealing mastic. Ideal for environmental seal in V joints and terminations, as well as covering armor connection on MV applications. NGAF meets ESI specifications. Available in various lengths as strips or plates. Technical characteristics Colour Black Tensile strength 2 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation >200% astm D-412 / ISO 37 Volume resistivity >1x10 14 Ohm.cm IEC93 Dielectric strength >10kV/mm IEC243 width thickness NGAF38-0, NGAF38-0, NGAF115-0, x NGAF12-2x0, STRESS GRADING MASTIC (HIGH K) OM OM is a soft and tacky orange colored rubber based stress grading (Hi K) mastic, with excellent physical and electrical performance. Designed for both joints and terminations for screen cut area as well as ferrule area, functioning as a void filler up to 42kV. Available as plates or strips. Technical characteristics Colour Orange Tensile strength >2 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation >200% astm D-412 / ISO 37 Dielectric constant >7 iec 250 Volume resistivity >1x10 8 Ohm.cm IEC93 Dielectric strength >10kV/mm IEC243 width thickness 58 OM 30-1x0, OM 30-2x0, OM 145-0,25N 145 2,5 250 OM 145-0,195N 145 2,5 195 OM 130-0,03N 130 1,2 30 OM 130-0,11N 130 2,5 110 OM 130-0,22N 130 2,5 220

61 SEF-AMAGAMATING EPR TAPE NGA NGA is a self amalgamating rubber tape, used as primary insulation buildup material on both V and MV joints. Excellent adhesion to any cable substrate. Technical characteristics Colour Black Thickness 0,5 or 0,75 mm Tensile strength 3 MPa BS 903 Ultimate elongation >550% BS 903 Dielectric strength >40kV/mm ASTM D 150 Volume resistivity >1x10 15 Ohm.cm ASTM D 257 oss factor <0,005 astm D 149 UV resistance / Ozone resistance Pass astm D4388 width thickness NGA19-5S 19 0,75 5 NGA19-5R 19 0,5 5 NGA19-10S 19 0,75 10 NGA19-10R 19 0,5 10 SEF-AMAGAMATING SEMI-CONDUCTIVE TAPE NGS NGS is a rubber based flexible semi-conductive tape. Used in joints to cover the ferrule on higher voltages (52kV) as well as in PIC terminations on the cable crutch area. Technical characteristics Colour Black Thickness 0,75 mm Tensile strength >1,0 MPa BS 903 Ultimate elongation >700% BS 903 Volume resistivity <1,5 Ohm.cm ASTM D 257 width NGS19-1,5 19 1,5 NGS

62 GENERA PURPOSE PVC TAPE NAE NAE is a commercial grade PVC insulating tape up to 0.6kV. Widely used in both joints and terminations. Technical characteristics Colour Black on demand Blue-Red-Grey-White-Yellow-Green Thickness 0,13 mm Tensile strength >20 N/cm CEI EN60454 Ultimate elongation >150% CEI EN60454 Dielectric strength >40kV/mm CEI EN60454 Flammability self extinguishing CEI EN60454 width (m) NAE NAE NAE GASS FIBER REINFORCED ADHESIVE TAPE NCV NVC is a glass fiber reinforced adhesive tape with excellent mechanical properties. Ideal for compacting joint cores and armor canister. Used also for covering sharp edges or armor components such as bolts of worm drive clamps. Technical characteristics Colour White Thickness 0,13 mm Tensile strength >20 dan/cm AFERA4004 Ultimate elongation 5% afera4004 width (m) NCV

63 TRANSPARENT ADHESIVE INSUATING TAPE NCT NCT is a transparent insulating tape, used in resin injected V or MV joints. Excellent environmental and physical properties. Technical characteristics Colour Trasparent Thickness 0,13 mm Tensile strength 25 N/cm CEI EN60454 Ultimate elongation 150% CEI EN60454 Dielectric strength >40kV/mm CEI EN60454 Flammability self extinguishing CEI EN60454 width (m) NCT SPACER TAPE NS NS is a polyester spacer mesh tape, specifically used in V or MV resin injected joints. width (m) NS

64 TINNED COPPER MESH CACU CACU is a tinned copper mesh, used extensively in various accessories in both low and medium voltages. Available in various roll lengths. Technical characteristics Material: electrolytic copper 99.95% width (m) CACU-60X1,5 60 1,5 CACU-60X CACU-60X CACU-60X CACU-60X CACU-100X CACU-100X TINNED COPPER FEXIBE BRAID WITH OR WITHOUT INSUATION F / F IS Earth braid, made of tinned copper. Available in various customized forms, kitted, insulated, solder blocked. Available with or without lug. cross sections (mm 2 ) F F F F F 10 IS 10 (insulated) 62

65 HOSE CAMP M/MO M/MO are stainless steel worm drive clamps for fixing braids or amour canister in both V or MV applications. Available with steel grades: AISI430, or AISI 304. Technical characteristics Material AISI 430 (Steel) / Material AISI 304 (Stainless steel) Ø min/max M300 10/18 M400 16/25 M500 20/32 M600 25/40 M700 32/50 M800 40/60 M100 50/100 M140 50/140 M160 50/160 CONSTANT FORCE RO SPRING Ø min/max MO400 16/38 MO500 27/51 MO600 33/57 MO700 40/64 MO800 46/70 MS MS are stainles steel, non magnetic, constant force springs for both V & MV applications. Stainles steel, grade AISI 301. Technical characteristics Material: AISI 301 Stainless steel Ø min Ø max width MS9-15I MS MS MS MS MS MS MS

66 NT/FAIS NYON CABE TIE NT/FAIS is a commercial grade plastic cable tie for various fastening purposes during V or MV kit assembly. Material: nylon. Technical characteristics Material: Nylon width NT90 4,8 90 NT150 4,8 150 NT250 4,8 250 NT330 4,8 330 NT501 4,8 500 FAIS FAIS FAIS

67 SKVK Shear head mechanical lugs Designed for V & MV aluminium or copper cables. Single bolted, the lug is suitable for both in and outdoor terminations. Kit contents High strength aluminium alloy body tin plated with tinned brass bolt. Installation instructions and color coded cable centering rings are supplied w. each lug. Ø Type tested acc. to: EN cross sections Al (mm 2 ) round sector shape cross sections Cu (mm 2 ) round sector shape Ø lug hole dimensions Ø overall 6-25SKVK SKVK SKVK SKVK

68 Shear head mechanical lugs C Designed for MV cables copper or aluminium up to 52kV. Bolt designed, the lug is suitable for both in and outdoor terminations. Kit contents High strength aluminium alloy body tin plated with tinned brass bolts. Installation instructions and color coded cable centering rings are supplied w. each lug. Ø Type tested acc. to: EN cross sections Al (mm 2 ) round sector shape cross sections Cu (mm 2 ) round sector shape Ø lug hole dimensions Ø overall C 16-95X C X12 C X C X12 C X ,5 C X12 C X C X12 C X C X12 C X16 C X C X

69 Shear head mechanical connector D The D range is designed for jointing aluminuim or copper cables up to 11kV, also for sector shapes conductors. All cross sectional sizes for both Al & Cu indicated, refer to VDE0295 Table5-9 normative standards. The body of the connector is made from high strength aluminium. Various bolt designeds are available, to be selected acc. to requirements. Ø Type tested acc. to: EN cross sections Al (mm 2 ) cross sections Cu (mm 2 ) round sector shape round sector shape dimensions Ø overall D1,5-16 SV-T-V-K , D10-35 SV-T-V-K D25-50 SV-T-V-K D4-50 SV-T-V-K D SV-T-V-K D SV-T-V-K D SV-T-V-K D SV-T-V-K D SV-T-V-K

70 M Shear head mechanical connector Up to 52kV The M series range of mechanical connectors are designed for both aluminium and copper cables. Technical description High strength aluminium alloy body tin plated with tinned aluminium alloy bolts. Installation instructions and color coded cable centering rings are supplied w. each connector. Ø Type tested acc. to: EN cross sections Al (mm 2 ) cross sections Cu (mm 2 ) round sector shape round sector shape Ø overall dimensions M M M M M M M

71 GT1 J Heat-Shrinkable STRESS CONTRO TUBE, DESIGNED FOR CABE JOINTS Up to Umax 52kV GT J is a stress control tube, specifically designed for MV, polymeric or paper, cable joints. The tube is soft flexible, has excellent adhesion to various cable insulations. Technical characteristics Material Crosslinked polyolefin Colour Black Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1,3 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength >6 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 400% 600% ASTM D-412 / ISO 37 Dielectric constant >12 iec 250 Volume resistivity >1x10 10 Ohm.cm IEC 93 Øi Tk øi Ø as supplied Ø after full recovery Tk wall thickness after full recovery spool nr. spool/box GT1-30 J 36,0 10,0 3, GT1-40 J 45,0 15,0 3, GT1-50 J 56,0 18,0 4, GT1-60 J 66,0 20,0 4, GT1-76 J 82,0 25,0 4, GT1-95 J 101,0 34,0 4,

72 GT1 T Heat-Shrinkable STRESS CONTRO TUBE, DESIGNED FOR CABE TERMINATIONS Up to Umax 52kV GT1- T is a stress control tube, specifically designed for MV, polymeric or paper, cable terminations. The tube is soft and flexible, has excellent adhesion to various cable insulations. Technical characteristics Material: Crosslinked polyolefin Colour Black Continuous operating temp. -40 C to +135 C Minimum shrink temp. >100 C Density 1,3 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength >4 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 300% 500% ASTM D-412 / ISO 37 Dielectric constant >15 iec 250 Volume resistivity >1x10 10 Ohm.cm IEC 93 CONDUCTOR EQUIPOTENTIA INES CABE INSUATION GT1 T CONDUCTIVE AYER FUX INES Øi Tk øi Ø as supplied Ø after full recovery Tk wall thickness after full recovery spool nr. spool/box GT1-30 T 36,0 10,0 3, GT1-40 T 45,0 15,0 3, GT1-50 T 56,0 18,0 4, GT1-60 T 66,0 20,0 4, GT1-76 T 82,0 25,0 4, GT1-95 T 101,0 34,0 4,

73 GT2 HEAT-SHRINKABE ANTI-TRACKING TUBE Up to Umax 52kV GT2 is a non tracking tubing designed for cable terminations. The tube provides protection for cable termination cores both in or outdoor. UV and erosion resistant. Technical characteristics Material Crosslinked polyolefin Colour Red Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1,2 g/cm 3 ±10% ASTM D-1505/ISO R1183 Tensile strength 17 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 500% astm D-412 / ISO 37 Water absorption <0,2% DIN / ISO 92 Dielectric constant <3,5 iec 250 Dielectric strength >20 kv/mm IEC 243 Volume resistivity >1x10 14 Ohm.cm IEC 93 Tracking resistance V applied: 4,5 kv IEC 507 Øi Tk øi Ø as supplied Ø after full recovery Tk wall thickness after full recovery spool nr. spool/box GT ,0 7,5 1, GT ,0 9,0 2, GT ,0 9,0 3, GT ,0 13,0 3, GT ,5 20,0 3, GT ,0 22,0 3, GT ,0 30,0 3, GT ,0 37,0 3, GT ,5 44,0 4,

74 GT2 S HEAT-SHRINKABE HEAVY WA Anti-tracking/insulating TUBE Up to Umax 52kV GT2-S tubing is a heavy wall version of the standard GT2 tubing, also used in MV joints from 36kV to 52kV. Technical characteristics Material Crosslinked polyolefin Colour Red Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1,2 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength 17 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 500% astm D-412 / ISO 37 Water absorption <0,2% DIN / ISO 92 Dielectric constant <3,5 iec 250 Dielectric strength >20 kv/mm IEC 243 Volume resistivity >1x10 14 Ohm.cm IEC 93 Tracking resistance V applied: 4,5 kv IEC 507 Øi Tk øi Ø as supplied Ø after full recovery TK wall thickness after full recovery spool nr. spool/box GT2-30 S 33,0 9,0 4, GT2-40 S 49,0 13,0 4, GT2-50 S 59,0 20,0 4, GT2-60 S 66,0 22,0 4, GT2-70 S 81,5 30,0 4, GT2-100 S 121,5 37,0 5, GT2-130 S 147,0 44,0 5,

75 GT2 BB HEAT-SHRINKABE BUS BAR INSUATING TUBE Up to Umax 52kV GT2 BB tubing is designed to insulate bus bar in MV switchgears and equipment. Technical characteristics Material Crosslinked polyolefin Colour Red Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1,2 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength 17 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 500% astm D-412 / ISO 37 Water absorption <0,2% DIN / ISO 92 Dielectric constant <3,5 iec 250 Dielectric strength >20 kv/mm IEC 243 Volume resistivity >1x10 14 Ohm.cm IEC 93 Tracking resistance V applied: 4,5 kv IEC 507 A on rectangle B on round A+B min A+B max Ø min Ø max GT2-20 (BB) GT2-30 (BB) GT2-35 (BB) GT2-40 (BB) GT2-50 (BB) GT2-60 (BB) GT2-70 (BB) GT2-100 (BB) Ø as supplied Ø after full recovery TK wall thickness after full recovery spool (m) GT2-20 (BB) 24,0 7,5 1,4 40 GT2-30 (BB) 34,0 9,0 2,8 30 GT2-35 (BB) 40,0 9, GT2-40 (BB) 50,0 13, GT2-50 (BB) 60,5 20,0 3,0 20 GT2-60 (BB) 67,0 22,0 3,2 20 GT2-70 (BB) 83,0 30,0 3,3 20 GT2-100 (BB) 122,0 37,0 3,8 20 CEARANCE DISTANCES (distance spacing shown in this table are typical measurements, users must verify/test distances prior to installation) voltage max on rectangle bar on round bar ph/ph ph/ground ph/ph ph/ground Um=12 kv Um=17,5 kv Um=24 kv

76 GT25 HEAT-SHRINKABE DUA WA TUBE (OUTER AYER CONDUCTING/INNER AYER INSUATING) Up to Umax 52kV GT25 is a co extruded, screened insulating tube. Designed for MV joints up to 52kV. The tube has an insulating inner wall (red color) and a conducting outer later (black). Technical characteristics Insulating material Material Crosslinked polyolefin Colour Red Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1,2 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength 17 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 500% ASTM D-412 / ISO 37 Water absorption <0,2% DIN / ISO 92 Dielectric constant <3,5 iec 250 Dielectric strength >20 kv/mm IEC 243 Volume resistivity 1x10 14 Ohm.cm IEC 93 Semi-conductive material Material Crosslinked polyolefin Colour Black Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1,0 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength 20 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 500% ASTM D-412 / ISO 37 Contents of carbon black >10% ASTM 2671 Water absorption <0,4% DIN / ISO 92 Volume resistivity <20 Ohm.cm IEC 93 Øi Tk øi Ø as supplied Ø after full recovery Tk wall thickness after full recovery GT ,0 15,0 6,5 GT ,0 15,0 7,5 GT25-80S 72,0 15,0 9,5 GT ,0 34,0 7,5 GT ,0 38,0 7,5 74

77 GT5 HEAT-SHRINKABE SEMI-CONDUCTIVE TUBE Max voltage: 52 kv GT5 is a semi-conductive tube, used on PIC joints and terminations up to 52kV. Technical characteristics Material Crosslinked polyolefin Colour Black Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1,0 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength 20 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 500% astm D-412 / ISO 37 Contents of carbon black >10% astm 2671 Water absorption <0,4% din / ISO 92 Volume resistivity <20 Ohm.cm IEC 93 Øi Tk øi Ø as supplied Ø after full recovery Tk wall thickness after full recovery spool nr. spool/box GT ,5 10,0 3, GT ,5 14,0 3, GT ,5 18,0 3, GT ,0 20,0 3, GT ,5 25,0 3, GT ,5 34,0 4,

78 GT10/GT10 F HEAT-SHRINKABE OI RESISTANT TUBE Up to Umax 52kV GT10 is a rigid transparent oil barrier tube, designed specifically for PIC (MIND) insulated cables. Ideal to build up insulation thickness on small cross section cables. GT10 F is a flexible oil barrier tube. Provides flexibility and quick shrinking. Designed for MIND cables from 1kV. Technical characteristics GT10 Material Crosslinked polyolefin Colour Trasparent Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1,3 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength 16 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 400% astm D-412 / ISO 37 Heat ageing (168h / 150 C) ISO 188 Corrosion non corrosive ASTM D2671 (Method A) Water absorption <0,2% din / ISO 92 Dielectric strength >15 kv/mm IEC 243 Volume resistivity >1x10 12 Ohm.cm IEC 93 Technical characteristics GT10 F Operating temperature U to +125 C Tensile strength ASTM D 2671 >14MPa Elongation at break ASTM D 2671 >400% ongitudinal shrinkage U to -10% Eccentricity astm D 2671 <30% Elongation at break after aging 158 C, 168 hrs. >300% Flammability VW-1 Pass Dielectric strength IEC243 >20kV/mm Volume resistance IEC93 >1014 Ω.cm Copper stability ASTM D 2671 Pass Øi øi Tk Ø as supplied Ø after full recovery Tk wall thickness after full recovery spool nr. spool/box GT ,5 10,0 3, GT ,5 12,0 3, GT ,5 19,0 3, GT10 F 12,7 12,7±0,3 4 0,8 50 n/a GT10 F 19,1 19,1±0,4 6 0,9 50 n/a GT10 F 25,4 25,4±0, n/a GT10 F 39 39±0,5 13 1,25 50 n/a 76

79 GT3 HEAT-SHRINKABE MEDIUM WA INSUATING TUBE WITH ADHESIVE GT3 is a medium wall co extruded tubing with adhesive. Provides excellent adhesion to a variety of cable substrates, and various metals. Ideal for V joints and termination as core insulation, or as cable sheath replacement in V and MV joints. The adhesive layer ensures a water tight seal and eliminates moisture ingress. The tube is UV and weather resistant. Technical characteristics Material Crosslinked polyolefin Colour Black Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1,1 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 500% 600% ASTM D-412 / ISO 37 Dielectric constant <5 iec 250 Volume resistivity >1x10 13 Ohm.cm IEC 93 Dielectric strength >15 kv/mm IEC 243 Water absorption <0,2% din / ISO 92 Fungus and mildew resistance G0 astm G 21 Contents of carbon black >2,5% astm 2671 Chemical resistance (Treatment with 0,1NNa2SO4, H2SO4, naoh, NaCI) Øi Tk øi Ø as supplied Ø after full recovery Tk wall thickness after full recovery (m) pieces/box GT ,0 10,0 2,5 1,5 80 GT ,0 12,0 2,5 1,5 50 GT ,5 16,0 2,5 1,5 40 GT ,0 22,0 2,8 1,5 15 GT ,5 29,0 3,1 1,5 12 GT ,0 34,0 3,1 1,5 8 GT ,5 42,0 3,5 1,5 6 GT ,5 50,0 3,5 1,5 5 GT ,5 60,0 3,5 1,5 4 GT ,0 70,0 3,5 1,5 4 GT3 tubing also available without adhesive. Please contact our sales offices. MOQ applies. 77

80 GT4 HEAT-SHRINKABE HEAVY WA INSUATING TUBE WITH ADHESIVE GT4 is a heavy wall co extruded tubing with adhesive. The tube sizes and recovered wall thicknesses are in full compliance with the DIN47640 specifications. UV and weather resistant, provides excellent abrasion and impact resistance for V or MV joints. Technical characteristics Material Crosslinked polyolefin Colour Black Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1,1 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 500% 600% ASTM D-412 / ISO 37 Dielectric constant <5 iec 250 Volume resistivity >1x10 13 Ohm.cm IEC 93 Dielectric strength >15 kv/mm IEC 243 Water absorption <0,2% din / ISO 92 Fungus and mildew resistance G0 astm G 21 Contents of carbon black >2,5% astm 2671 Chemical resistance (Treatment with 0,1NNa2SO4, H2SO4, naoh, NaCI) Øi Tk øi Ø as supplied Ø after full recovery Tk wall thickness after full recovery (m) pieces/box GT ,0 4,0 2,4 1,5 250 GT ,5 5,0 2,8 1,5 200 GT ,0 7,0 4,0 1,5 80 GT ,0 12,0 4,5 1,5 40 GT ,0 4,5 1,5 35 GT ,0 20,0 4,5 1,5 20 GT ,5 22,0 4,5 1,5 12 GT ,0 4,5 1,5 8 GT ,0 42,0 4,5 1,5 6 GT ,0 48,0 4,5 1,5 5 GT ,5 48,0 4,5 1,5 4 GT ,0 48,0 4,5 1,5 4 GT4 tubing also available without adhesive. Please contact our sales offices. MOQ applies. 78

81 GT7 HEAT-SHRINKABE THIN WA TUBE W/O ADHESIVE GT7 is a commercial grade thin wall insulating sleeve. Ideal for covering earth braids or smaller cross section V termination cores. UV resistant (black color). Other colors available on request. Technical characteristics Material Crosslinked polyolefin Colour Black Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1,1 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 500% 600% ASTM D-412 / ISO 37 Dielectric constant <5 iec 250 Volume resistivity >1x10 13 Ohm.cm IEC 93 Dielectric strength >15 kv/mm IEC 243 Water absorption <0,2% din / ISO 92 Fungus and mildew resistance G0 astm G 21 Contents of carbon black >2,5% astm 2671 Chemical resistance (treatment with 0,1NNa2SO4, h2so4, NaOH, NaCI) Øi Tk øi Ø as supplied / after full recovery Tk wall thickness after full recovery spool (m) GT7-4,8 4,8/2,4 0, GT7-6,4 6,4/3,2 0, GT7-9,5 9,5/4,8 0, GT7-12,7 12,7/6,4 0, GT ,2 0,76 50 GT /9,5 0,76 50 GT7-25,4 25,4/12,7 0,89 50 GT /16 1,02 50 GT7-38,1 38,1/19 1,

82 GT11/GT11 R HEAT-SHRINKABE ADHESIVE INED WRAP AROUND REAPIR SEEVE GT11 is an adhesive lined wraparound sleeve, while GT11R is a fiber reinforced version. Ideal for joint outer sheath rebuilding on both V and MV applications when space is limited, or when parking the outer jacket tubing is difficult. GT11 R provides superior impact and cut through resistance. Technical characteristics Material Crosslinked polyolefin Colour Black Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1,1 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 500% 600% ASTM D-412 / ISO 37 Dielectric constant <5 iec 250 Volume resistivity >1x10 13 Ohm.cm IEC 93 Dielectric strength >15 kv/mm IEC 243 Water absorption <0,2% din / ISO 92 Fungus and mildew resistance V applied: 1, with: G0 ASTM G 21 Contents of carbon black >2,5% astm 2671 Chemical resistance (Treatment with 0,1NNa2SO4, H2SO4, naoh, NaCI) Ø as supplied / after full recovery Tk wall thickness after full recovery standard (m) GT11-34 / GT11-34 R 41/10 2,5 1,5 GT11-50 / GT11-50 R 55/15 2,5 1,5 GT11-75 / GT11-75 R 75/22 2,8 1,5 GT / GT R 105/30 3 1,5 GT / GT R 120/40 3,5 1,5 GT / GT R 146/38 3,5 1,5 GT / GT R 164/42 3,5 1,5 Ø GT / GT R 200/55 3,5 1,5 80

83 36TTS HEAT-SHRINKABE SEMI-CONDUCTIVE CABE BREAKOUT ADHESIVE INED Up to Umax 52kV 36TTS injection molded three finger semi-conductive breakout. Ideal for PIC joints and terminations up to 52kV. The breakout s fingers are fully, while the body is partially covered with anti-tracking sealant mastic. Watertight, UV and weather resistant. Technical characteristics Material Crosslinked polyolefin Colour Black Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength >10 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 300% astm D-412 / ISO 37 Volume resistivity <20 Ohm.cm IEC 93 Ø body as supplied/after full recovery Ø finger as supplied/after full recovery after full recovery 36TTS13 55/23 23/ TTS23 75/31 32/ TTS33 110/46 52/ TTS43 135/56 64/

84 36TTE HEAT-SHRINKABE ANTI-TRACKING CABE BREAKOUT Up to Umax 52kV 36TTE injection molded three finger anti-tracking breakout. The finger and breakout body are covered with a red anti-tracking mastic, providing an complete environmental seal. To be used on MV terminations both in and outdoor. UV resistant. Technical characteristics Material Crosslinked polyolefin Colour Red Continuous operating temp. -40 C to +135 C Minimum shrink temp. >125 C Density 1,2 g/cm³ ± 10% ASTM D-1505 / ISO R-1183 Tensile strength >6 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation >200% ASTM D-412/ ISO 37 Dielectric constant 5 IEC 250 Volume resistivity > 1x10 12 Ohm.cm IEC 93 Dielectric strength > 10 kv / mm IEC 243 Tracking resistance V applied: 3,25 kv ASTM D Ø body as supplied/after full recovery Ø finger as supplied/after full recovery after full recovery 36TTE13 55/23 23/ TTE23 75/31 32/ TTE33 110/46 52/ TTE53 135/56 64/

85 1TTI Heat-Shrinkable OW VOTAGE INSUATING BREAKOUT Up to Umax 1,2kV 1TTI injection molded V insulating breakouts. Available from 2 finger up to 4 fingers. The fingers and part of the breakout body are covered with adhesive. Provides an excellent environmental seal for V terminations. The complete rage of the breakouts are UV resistant. Technical characteristics Material Crosslinked polyolefin Colour Black Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1 g/cm 3 ± 10% ASTM D-1505 / ISO R-1183 Tensile strength >8 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 300% astm D-412 / ISO 37 Dielectric constant 5 IEC 250 Volume resistivity >1x10 13 Ohm.cm IEC 93 Dielectric strength >10 kv/mm IEC 243 Ø body as supplied/after full recovery Ø finger as supplied/after full recovery 2 finger breakouts after full recovery 1TTI02 20/8 10/4 60 1TTI12 28/9 12/ finger breakouts 1TTI13 35/13 13/4 85 1TTI23 60/22 24/ TTI33 80/33 36/ TTI43 110/47 38/ TTI53 135/55 65/ TTI63 155/55 65/ finger breakouts 1TTI04 28/9 8/4 70 1TTI14 38/14 12/4 85 1TTI24 55/20 21/ TTI34 72/22 25/ TTI44 90/35 34/ TTI54 125/50 50/

86 DPA HEAT-SHRINKABE ANTI-TRACKING RAIN SHEDS Up to Umax 52kV DPA injection molded anti-tracking rain sheds. The inside of the collar area is coated with anti-tracking erosion resistant mastic. To be used as creepage extender on MV in- or outdoor terminations. Technical characteristics Material Crosslinked polyolefin Colour Red Continuous operating temp.-40 C to +135 C Minimum shrink temp. 125 C Density 1,2 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength >6 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 200% astm D-412 / ISO 37 Dielectric constant >5 iec 250 Volume resistivity 1x10 12 Ohm.cm IEC 93 d as supplied/after full recovery D DPA /16 92 DPA / DPA / DPA /

87 PTD/PTS Heat-Shrinkable Anti-tracking RIGHT ANGE AND STRAIGHT BUSHING BOOTS Up to Umax 52kV PTD and PTS are injection molded, heat-shrinkable, anti-tracking, bushing boots. Designed for medium voltage terminations. Erosion and UV resistant. Ideal for indoor installation as the thick wall ensures mechanical support for the terminations. Both designs, straight and right angle have non tracking mastic sealing both at the cable and bushing area. Technical characteristics Material Crosslinked polyolefin Colour Red Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1,2 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength >6 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 200% astm D-412 / ISO 37 Dielectric constant >5 iec 250 Volume resistivity 1x10 12 Ohm.cm IEC 93 Dielectric strength >10 kv/mm IEC 243 Tracking resistance V applied: 3,25 kv ASTM D bushing side as supplied/after full recovery cable termination side as supplied/after full recovery PTD1 80/33 34/20 PTD2 80/33 58/20 PTS1 70/37 36/20 PTS2 95/37 67/27 85

88 Heat-Shrinkable CABE END CAPS WITH ADHESIVE Up to Umax 1,2kV CAPT CAPT injection molded, heat-shrinkable, insulating cable end caps. The caps are available with or without adhesive. The caps are weather and UV resistant, and the adhesive lined versions prevent moisture and water ingress. The CAPT with adhesive can also be utilized as low voltage live end seals. Sold as separate kits, with appropriate marking. Technical characteristics Material Crosslinked polyolefin Colour Black Continuous operating temp. -40 C to +135 C Minimum shrink temp. 125 C Density 1 g/cm 3 ±10% ASTM D-1505 / ISO R1183 Tensile strength >8 N/mm 2 ASTM D-412 / ISO 37 Ultimate elongation 300% ASTM D-412 / ISO 37 Dielectric constant <5 iec 250 Volume resistivity >1x10 13 Ohm.cm IEC 93 Dielectric strength >10 kv/mm IEC 243 as supplied/after full recovery Ø after full recovery CAPT12 12/4,5 35 CAPT14 14/6 35 CAPT20 20/8 45 CAPT26 26/11 60 CAPT40 40/ CAPT57 57/ CAPT75 75/ CAPT / CAPT / CAPT / CAPT /