LCD Television. Operating Instructions. U.K. Standard. English. Model No. TX-37LZD70

Transcription

1 TV Operating Instructions LCD Television Model No. TX-37LZD70 INPUT OPTION SD CARD U.K. Standard English Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only.

2 Turn your living room into a home theatre! Experience an amazing level of multi-media excitement Receive digital terrestrial broadcastings using an integrated (Digital Video Broadcasting) tuner (Display DVB programmes with TV Guide (p. 14) / Timer recording (p. 36) / Register and instantly call up favourite programmes with Profile Edit (p. 29)) Sharp pictures with HDMI terminal Control DVD recorder / VCR via TV with Q-Link connection (p. 40) Create home theatre and Panasonic equipment link-ups with VIERA Link without complicated settings! (p. 42) Support Audio Description signal (p. 12 and p. 22) Audio description (AD) is an ancillary component associated with a broadcast which delivers a verbal description of the visual scene as an aid to understanding and enjoyment particularly for visually-impaired viewers. Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) TX-37LZD70 Declaration of Conformity No 4887, 15 June

3 FULL HD This TV uses a high definition LCD panel ( pixels) to produce high definition pictures close to their original resolution. V-real Pro 2 V-real Pro 2 technology is the collective name for original technologies developed by Panasonic to enhance total Full HD (1080p) image quality: V-real Pro 2 PROCESSOR: Enhance and output the incoming video signals as high-image-quality signals. The resulting video signals deliver the kind of high resolution that large screens require. V-real Pro 2 DRIVER: Precisely controls panel drive to optimise its performance. Achieves high image quality with the equivalent of high steps of gradation. V-real Pro 2 PANEL: Provide clear, vivid display of the video signal after processing by the V-real Pro 2 Processor and Driver. The high resolution of 1,920 1,080 pixels ensures beautiful images with clearer, sharper details. Intelligent Scene Controller Intelligent Scene Controller consists of Backlight Control and Gamma Correction and achieves tighter black and more detailed expression. IPS-Alpha Panel IPS-Alpha Panel is one of LCD panels, which offers 178-degree viewing angle. This delivers beautiful images regardless of the viewing angle. Contents Be Sure to Read Safety Precautions 4 (Warning & Caution) Notes 5 Maintenance 5 Quick Start Guide ories / Options 6 Identifying Controls 7 Basic Connection 8 Auto Setup 10 Enjoy your TV! Basic Features Watching TV 12 Using TV Guide 14 Watching VCR, DVD and Satellites 16 Viewing Teletext 18 Advanced Features How to Use Menu Functions 21 (picture, sound quality, etc.) DVB Settings (DVB) 26 (pay-tv, software update) Editing Channels 28 Tuning Channels 30 Restore Settings 32 Owner ID 33 Input Labels 34 Displaying PC Screen on TV 35 Recording Controls (DVB) 36 Viewing from SD Card (Photos) 38 Q-Link Functions 40 HDMI Functions 41 (HDMI terminal / VIERA Link) External Equipment 44 FAQs, etc. Technical Information 46 FAQs 50 On screen messages 52 Specifications 54 Licence 55 Index 55 Quick Start Guide Viewing Advanced FAQs, etc. 3

4 Safety Precautions Handling the mains plug Ensure that the mains plug is easily ible at all times. The On / Off switch on this model does not fully disconnect the TV from the mains supply. Remove the mains plug from the wall socket when the TV is not used for a prolonged period of time. Warning & Caution Power source This TV is designed to operate on V, 50 / 60 Hz AC. Do not remove the cover Do not remove the rear cover as live parts are ible when it is removed. There are no user serviceable parts inside. Do not expose to direct sunlight and other sources of heat Avoid exposing the TV to direct sunlight and other sources of heat. To prevent fire never place any type of candle or naked flame on top or near the TV. AC V 50 / 60 Hz IMPORTANT: THE MOULDED MAINS PLUG FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark ASA or the BSI mark on the body of the fuse. If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained. A replacement fuse cover may be purchased from your local Panasonic Dealer. If the fitted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock if the cut off mains plug is inserted into any 13 amp socket. If a new mains plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician. IMPORTANT: The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your mains plug, proceed as follows. The wire which is coloured BLUE must be connected to the terminal in the mains plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the mains plug which is marked with the letter L or coloured RED. Under no circumstances should either of these wires be connected to the Earth terminal of the three pin mains plug, marked with the letter E or the earth symbol. How to replace the fuse. For plug type shown in example 1: Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit securely into the mains plug (see example 1). For plug type shown in example 2: Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse, then press the fuse cover down securely (see example 2). Example 1 Example 2 4

5 Notes Do not expose to rain or excessive moisture To prevent damage which might result in electric shock or fire, do not expose this TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV. Do not block the rear ventilation openings Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths and curtains. Allow sufficient space around the TV for radiated heat Minimum distance TV Stand Do not place the TV on sloped or unstable surfaces The TV may fall off or tip over. Use only the dedicated stands / mounting equipment Using an unauthorized stand or other fixtures may make the TV shaky, risking injury. Be sure to ask your local Panasonic dealer to perform setup. Use optional stands / mounts (p. 6). Do not allow children to handle SD card As with a small object, SD card can be swallowed by young children. Please remove SD card immediately after use. (cm) Auto power standby function If no signal is received and no operation is performed in Analogue TV mode for 30 minutes, the TV will automatically go to standby mode. Keep the TV away from these equipment Electronic equipment In particular, do not place video equipment near the TV (electromagnetic interference may distort images / sound). Equipment with an infrared sensor This TV also emits infrared rays (this may affect operation of other equipment). Transport only in upright position Maintenance First, remove the mains plug from the socket outlet. Display panel Regular care: Gently wipe the surface clean of dirt by using a soft cloth. Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry. Caution The surface of the display panel has been specially treated and may be easily damaged. Do not tap or scratch the surface with your fingernail or other hard object. Use care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances (this may degrade surface quality). Cabinet Regular care: Wipe the surface clean using a soft dry cloth. Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth. Caution Use care not to subject the TV s surfaces to detergent. (A liquid inside the TV could lead to product failure.) Use care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances (this may deteriorate the surface by peeling the paint). Do not allow the cabinet to make contact with a rubber or PVC substance for a long time. Mains plug Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.) 5

6 TV ories / Options Standard ories Remote Control Transmitter N2QAYB Check that you have the ories and items shown Batteries for the Remote Clamper Control Transmitter (2) TMM8E18048 R6 (UM3) Installing remote s batteries 1 Operating Instructions Pan European Guarantee Card Pull open 1 Year Guarantee Registration CRM (Customer Relationship Management) Using the clamper 2 Hook Close Rear of the TV To tighten: To loosen: Note the correct polarity (+ or -) Caution Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control. Do not mix old and new batteries. Do not mix different battery types (such as alkaline and manganese batteries). Do not use rechargeable (Ni-Cd) batteries. Do not burn or breakup batteries. Keep the knob pressed Do not bundle the RF cable and mains lead together (could cause distorted image). Fix cables with clampers as necessary. When using the optional ory, follow the option s assembly manual to fix cables. 6 Optional ories Wall-hanging bracket TY-WK32LR2W WARNING! Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer. Any damage resulting from not having a professional installer mount your unit will void your warranty. Always be sure to ask a qualified technician to carry out set-up. Incorrect fitting may cause equipment to fall, resulting in injury and product damage. Do not mount the unit directly below ceiling lights (such as spotlights, floodlights or halogen lights) which typically give off high heat. Doing so may warp or damage plastic cabinet parts. Please contact your nearest Panasonic dealer to purchase the recommended wall-hanging bracket. For additional details, please refer to the wall-hanging bracket installation manual. How to remove the TV Stand Remove four screws. Rear of the TV

7 Identifying Controls Remote control signal receiver Mains power On / Off switch SD CARD slot (p. 39) Swing door to open Headphones jack (p. 44) AV3 terminals (p. 44) DVB LED Active for Timer Programming or Standby for Direct TV Recording: orange (flash) Timer Programming On: orange C.A.T.S. (Contrast Automatic Tracking System) sensor (senses brightness to adjust picture quality in Auto Mode in Picture Menu) (p. 22) Power LED Standby: red On: green When using the remote control, indicates the TV has received a command. F TV AV Changes the input mode Increases or decreases the programme position by one. When a function is already displayed, press to increase or decrease the ed function. When in Standby mode, switches TV On. Function Volume / Contrast / Brightness / Colour / Sharpness / Tint (NTSC mode) / Bass / Treble / Balance / Auto Setup (p. 30) Quick Start Guide Standby On / Off switch (Switches TV On or Off standby) Changes aspect ratio (p. 13) VIERA Link Menu (p. 43) TV Guide (p. 14) OK button to confirm ions and choices Press after ing programme positions to quickly change programme. Main Menu Press to VIERA Link, Picture, Sound and Setup menus (p. 21) Teletext (p. 18) Subtitles Showing subtitles (p. 12) Programme / channel change buttons (0-9) and Teletext page buttons. (p. 12 and p. 19) When in Standby mode, switches TV On. Programme Information (p. 13) INPUT OPTION SD CARD Changes the input mode TV - switches DVB (digital broadcasting) / Analogue mode (p. 12) AV - changes AV input mode (p. 16) Viewing SD Card (p. 38) Option menu Sets the able settings of viewing and sound options easily (p. 12) (Returns to TV screen) Cursor buttons to make ions and adjustments Returns to the previous menu Coloured buttons used for the ion, navigation and operation of various functions Still picture (p. 13) Teletext Hold (p. 20) Teletext Index (p. 20) Sound mute On / Off Controls ories / Options Identifying Selects programmes in sequence Volume VCR / DVD operations (p. 17) Surround (p. 22) DIRECT TV REC DIRECT TV Recording To immediately record programme in VCR / DVD recorder with Q-Link connection (p. 40) 7

8 Basic Connection External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads. Example 1 Connecting aerial TV only Rear of the TV Aerial Example 2 Connecting DVD Recorder / VCR TV, DVD Recorder or VCR Rear of the TV Aerial AC V 50 / 60 Hz AC V 50 / 60 Hz Mains lead RF cable Mains lead PC R L AUDIO OUT Y PC R L AUDIO OUT Y V I D E O PB PR L C O M P O N E N T V I D E O PB PR L C O M P O N E N T A U D I O R A U D I O R SCART cable (fully wired) RF cable RF IN DVD Recorder or VCR RF OUT RF cable 8 Note Connect to AV2 for a DVD Recorder / VCR supporting Q-Link (p. 40). Connect to AV1 for a Satellite receiver. If connecting the TV and Satellite receiver with SCART cable, you can watch satellite broadcast by RGB input signal. SCART: 21 pin connection used for video, audio and switching signals (Also known as Euro SCART and Peritel) RF: Radio Frequency - Signal received from terrestrial aerial. RGB / S-Video / Video: Choose between these three video formats depending on personal preference and equipment requirement. (RGB - Red, Green and Blue) VCR: Video Cassette Recorder DVD: Digital Versatile Disc

9 Example 3 Connecting DVD Recorder / VCR and Sattelite receiver TV, DVD Recorder / VCR and Satellite Rear of the TV AC V 50 / 60 Hz Aerial PC Mains lead R L RF cable Quick Start Guide AUDIO OUT Y V I D E O A U D I O PB PR L R C O M P O N E N T RF cable Basic Connection SCART cable (fully wired) SCART cable (fully wired) SCART cable (fully wired) Satellite receiver DVD Recorder or VCR RF IN RF IN RF OUT RF cable RF IN RF OUT RF cable 9

10 Auto Setup Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer. INPUT 1 Plug the TV into mains socket and switch On (Takes a few seconds to be displayed) Auto Setup - Digital and Analogue Digital Scan Analogue Scan Channel Service Name Type Quality 62 CBBC Channel DVB BBC Radio Wales DVB BBC Radio Cymru DVB E4 DVB Cartoon Nwk DVB Analogue - 33 BBC1 Analogue - This will take about 3 mins. You can now use the remote control to turn On the TV or turn the TV to standby mode. (Power LED: On) Auto Setup will start to search for TV channels and store them in the numbered order as specified by the broadcasters. OPTION SD CARD DOWNLOAD IN PROGRESS PLEASE WAIT Programme : 63 Remote control unavailable If a compatible recording equipment with Q-Link or similar technologies (p. 40) is connected, analogue channel information is automatically downloaded to the equipment. 2 When inputting owner ID Owner ID Please enter new PIN PIN * * * * Change 1 of 2 Page up 0 9 PIN entry Page down Following the on-screen operation guide, enter your own choice of PIN number, name, etc. For detailed procedures Owner ID (p. 33) Make a note of the PIN number in case you forget it. When inputting owner ID later If you input the ID later Owner ID (p. 33) TV 3 Select the picture setting Viewing Mode Please your preferred viewing mode. Dynamic Normal Cinema Auto Also possible to change the setting in Picture Menu (p. 22) set 10 Auto Setup is now complete and your TV is ready for viewing. To check programme list at-a-glance TV Guide (p. 14) To edit channels Editing Channels (p. 28) Analogue Programme Edit (p. 31)

11 Many features available on this TV can be ed via the On Screen Display menu. How to use remote control Open the main menu Using the On Screen Displays Move the cursor / the menu Move the cursor / adjust levels / from a range of options the menu / store settings after adjustments have been made or options have been set Return to the previous menu Exit the menu system and return to the normal viewing screen Quick Start Guide Auto Setup ON SCREEN HELP Instructions box (example: Owner ID) Owner ID Please enter new PIN PIN * * * * 1 of 2 Change Page up 0 9 PIN entry Page down On-screen operation guide will help you. Note If tuning has failed Auto Setup (p. 30). If downloading has failed Download (p. 23). If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On with Mains power On / Off switch. 11

12 Watching TV INPUT OPTION SD CARD 1 Turn power on (Press for about 1 second) Mains power On / Off switch should be On. 2 Select DVB (Digital Video Broadcasting) or Analogue 1 BBC ONE WALES 23:35 Profile 1 Corontation Street 20 : 00 ~ 20 : 55 Now Change category For info press Information banner You can also the mode using the TV button on the top panel of the TV. Volume 3 Select a channel up or down To the two or three-digit programme number, e.g. 39 (in a short time) To programmes using TV Guide (p. 14) DIRECT TV REC TV Note To watch pay-tv (p. 27) Other useful functions (Operate after ) 12 Off Timer Turn the TV off automatically after a fixed period Display the menu Select Setup Main Menu VIERA Link Picture Sound Setup Select Off Timer and set the time Setup Menu DVB Timer Programming DVB Profile Edit DVB Service List Q-Link Settings Child Lock Tuning Menu Off Timer Power on Preference Teletext Off TV FASTEXT To cancel Set to Off or turn the TV off To display the remaining time Information banner (p. 13) When the remaining time is within 3 minutes, the remaining time will flash on screen. 1/3 set

13 Other useful functions (Operate after ) Hold Freeze / unfreeze picture Display subtitles Display the current programme status Display information banner Display / hide subtitles (if available) To change the language for DVB Preferred Subtitles (p. 23) (If available) OPTION Check or change the current programme status instantly To change change Subtitle Language (DVB mode) Possible if the programme has some languages of subtitles Multi Audio (DVB mode) Possible if the programme has some languages of sounds NICAM (Analogue mode) Sound Menu (p. 22) Volume Correction Adjusts volume of individual channel or input mode Audio Description (DVB mode) This function can aid visually-impaired viewers by adding an additional audio track to describe events on-screen. Select On if the programme has this signal, then you will hear the description sound Note Also possible to change the settings in Menu list (p. 22 and p. 23). Display programme information Programme DVB: Programme Start / Finish time Analogue: Programme Status Weak TV signal Information of another channel Information on next programme (DVB) To banner operation Channel Current time Category 1 BBC ONE WALES 23:35 Profile 1 Corontation Street Change category 20 : 00 ~ 20 : 55 Now For info press Mute Bad signal Encrypted Subtitles Sound mute Scrambled broadcasting watch the programme listed in the banner Information 1st press Display banner 2nd press Banner + programme synopsis (DVB) To set display timeout Banner Display Timeout (p. 23) To hide Appears AD, Subtitles, TXT, Multi-Audio indications are displayed as available on particular channels or services, but may not be available for all individual programmes being broadcast. To change the category AD TXT Multi-Audio 45 Features available Subtitle Off timer Audio Multiple audio description Teletext blue also when changing channel. 3rd press Exit Example: 1 BBC ONE WALES 23:35 All DVB Services Corontation Street Change category 20 : 00 ~ 20 : 55 Now Exit info [AD] Viewing Watching TV Press the button twice to confirm availability of these functions. Mute Bad Signal Encrypted AD Subtitles TXT Multi-Audio 45 Change aspect ratio Change the aspect ratio (p. 46) Enjoy viewing the picture at its optimum size and aspect. To change the mode Display Aspect During the list is displayed, Selection list the mode To change the mode using the ASPECT button only (Press repeatedly until you reach the desired mode) Aspect Selection list Store Aspect Selection Auto 16:9 14:9 4:3 Zoom1 Zoom2 Zoom3 Select Change 13

14 Using TV Guide TV Guide Electronic Programme Guide (EPG) provides an on-screen listing of programmes currently broadcast and future broadcasts over the next seven days (depending on the broadcaster). Analogue broadcasts will be listed after DVB broadcasts. D means DVB channel and A means Analogue channel. INPUT OPTION SD CARD View TV Guide (landscape or portrait) View Portrait to see one channel at a time View Landscape to see many channels Programme Current date and time (TV Guide start page) TV Guide date TV Guide time Channel Landscape (Displays by broadcaster) TV Guide : Landscape Wed 12/05/04 10:46 Wed 12th Prog. type All Types Category All Services 20:00-20:30 DIY SOS : We open in the Battersbys Time: 19:30 20:00 20:30 21:00 21:30 D 1 BBC ONE Eastender DIY SOS The Bill Red Cap D 7 BBC THR Hot Wars Horiday Program So D 14 E4 Emmerdal. Coronation Street The Bill D 70 CBBC Cha 10 O clock News BBC Pepsi Char. Good bye Hello D 72 Cartoon Panorama Sex And The City Terminator D 105 BBCi I m A Celebrity Pop Idol News The D 719 BBC Radi Rugby 15 To 1 The Bill Select channel Change display mode Page up Select programme Info Timer Programming Page down -24 Hr +24 Hr Prog.type Category To change the layout Prog. type 1 BBC O D D D D D 7 BBC T 14 E4 70 CBBC 72 Cartoo (Landscape / Portrait) To previous day (DVB mode) red To next day (DVB mode) Select programme Change display mode Select channel Timer Programming -24 Hr +24 Hr Prog.type Category Portrait (Displays by time) green TV To return to TV To view a programme list of the ed type (DVB mode) yellow Prog. typ e All Types All 21:00 Types 21:30 Movies Red Ca p News So Entertainment The Bil l Sport Good by e Hell Children s Terminator News The Education The Bil l Lifestyle (Type list) type view Drama To view a programme list of the ed category blue Category All Service s All Service s All DVB Services All Analogue Services Free TV Pay TV Radio Information Profile 1 Profile 2 (Category list) Only analogue TV channels are listed To list favourite channels (p. 29) category Profile 3 14 Profile 4 view

15 0 9 Other useful functions (Operate after viewing TV Guide) Watch the programme Select the channel or programme now on the air Select View (DVB) Eastender 19:30-20:00 View Timer Programming (TV screen) View details of the programme (DVB mode) Select the programme View details TV Guide Wed 05/08/04 18:50 Return to List Timer Programming Details To return to the start page Timer programming to record (DVB mode) Select the programme to be broadcast set (Timer Programming screen) DVB Timer Programming Wed 05/08/04 18:50 Pos. Name Date Start End min. 1 BBC1 6/8 FR 18:00 20: ITV1 7/8 SA 21:30 22:30 60 Select timer Edit timer Delete To check / change / cancel a timer programming event Timer Programming (p. 36) Off Off DVB LED will turn on if Timer Programming is set. DVB LED Orange DVB LED (Rapid blinking during recording) To return to TV Guide Note When recording programmes, you must make the proper settings on the external recording equipment connected to the TV. If a compatible recording equipment with Q-Link or similar technologies is connected to the TV (p. 8) and the Q-Link Settings (p. 23) are completed, no setting of the equipment is required. Also read the manual of the recording equipment. If you the programme now on the air, the confirmation screen whether watching or recording will appear. Select Timer Programming to record from the time you finish the Timer Programming setting. Viewing Using TV Guide Note When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time before the TV Guide is completely shown. 15

16 Watching VCR, DVD and Satellites Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input. Connect the Satellite receiver and you can watch satellite broadcasts. To connect the equipment (p. 8 and p. 9) The Remote Control is capable of operating some functions of ed Panasonic external equipment. INPUT OPTION SD CARD 1 Turn 2 the TV on When connecting with SCART as example 2 or 3 (p. 8 and p. 9) Receives input signals automatically when playback starts or satellite receiver is switched on Input signals are automatically identified by the SCART (pin 8) terminal. This function is also available for HDMI connections (p. 43). If input mode is not switched automatically Perform and Dependant on the setup of the equipment Display the Input menu 3 Select the input mode connected to the equipment Input Selection AV1 AV2/AV2S AV3/AV3S COMPONENT PC HDMI1 HDMI2 TV watch You can also the input using the AV button on the remote control or the top panel of the TV. Press the button repeatedly until the desired input is ed. You can label or skip each input modes Input Labels (p. 34) MULTI WINDOW DIRECT TV REC 4 View Displays the ed mode To return to TV Note If the external equipment has an aspect adjustment function, set to 16:9. For details, see the manual of the equipment or ask your local dealer. 16

17 Screen display Terminal Manual input default setting in Input Labels ( ) Auto input EC mode or VIERA Link ( ) AV1 AV2 AV3 Component PC HDMI1 HDMI2 AV1 AV1-RGB EC/AV1 EC/AV1-RGB AV2 AV2-S-Video AV2-RGB EC/AV2 EC/AV2-S-Video EC/AV2-RGB AV3 AV3-S-Video Component PC HDMI1 HDMI2 EC/HDMI1 Applicable for EC mode and VIERA Link EC/HDMI2 Applicable for VIERA Link Panasonic equipment connected to the TV can be directly operated with the remote control. VCR / DVD switch Select VCR to operate Panasonic VCR or DVD equipment Select DVD to operate Panasonic DVD equipment or Player home theatre Standby Set to Standby mode / Turn on Play Playback videocassette / DVD Stop Stop the operations Rewind / Skip / Search VCR: Rewind, view the picture rapidly in reverse DVD: Skip to the previous track or title Press and hold to search backward Fast-forward / Skip / Search VCR: Fast-forward, view the picture rapidly forward DVD: Skip to the next track or title Press and hold to search forward Pause Pause / Restart DVD: Press and hold to play at slow speed Programme Up / Down Select programme Record Start recording Setting your remote control to operate Panasonic VCR, DVD, etc. Set the VCR / DVD switch to the appropriate position Press and hold during the following operations Enter the appropriate code for the equipment to be controlled, see table below VCR position Equipment Code VCR 10 (default) DVD 11 Press DVD position Equipment Code DVD 70 (default) Player home theatre 71 Viewing Watching VCR, DVD and Satellites Note Confirm correct operation after the code changed. The codes will be reset to default values if batteries are replaced. DVD means DVD player, DVD recorders and Recorder home theatre. Some operations may not be possible on some equipment models. 17

18 Viewing Teletext You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster) DVB (digital broadcasting) mode DVB teletext services DVB teletext services differ greatly from analogue teletext. When you switch to a DVB teletext service, the images you see can contain graphics and text, laid out and controlled in a manner decided by the broadcaster. You can check if the programme has teletext information. 1 If in Analogue mode Select DVB Information banner (p. 13) Displayed if programme has teletext information 1 BBC ONE WALES 23:35 Profile 1 Corontation Street Change category 20 : 00 ~ 20 : 55 Now For info press TXT INPUT OPTION SD CARD 2 Switch to Teletext 17:51 28 Feb 3 How to use In all cases, it is possible to navigate the pages using buttons on the remote control, but because the commands available must apply to all manufacturers of DVB equipment, some on screen commands may not correspond exactly to the remote control buttons. For example: When or go is displayed When,,, symbol is displayed When the key words are displayed on colour bar When options with numbers are displayed When i is displayed (information) To return to TV red green yellow blue MULTI WINDOW TV DIRECT TV REC To change the channel Note As soon as you switch to a DVB channel with links to a teletext service, software is downloaded in the background to enable the teletext function. This means that when switching to a DVB channel, you should wait for approximately 5 seconds before pressing the TEXT button - this will allow the software to download. If you press the TEXT button before download is complete, there will be a short delay before the text screen is displayed. While navigating DVB teletext, you will find there is a short delay when moving between pages while the page downloads. There is often a prompt shown somewhere on the page (for example Loading ) to let you know that this is happening. 18

19 INPUT OPTION SD CARD Analogue mode What is FASTEXT mode (default)? In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To more information about one of these subjects, press the appropriately coloured button. This facility enables fast to information on the subjects shown. What is List mode? In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these numbers can be altered and stored in the TV s memory. ( Store frequently viewed pages, p. 20) To change mode Teletext in Setup Menu (p. 23) 1 If in DVB mode Select Analogue 2 3 Switch to Teletext Displays the index page (content varies depending on the broadcasters) Select the page or up down or Current page number Sub page number << >> 17:51 28 Feb TELETEXT INFORMATION Colour bar red green yellow blue (Corresponds to the colour bar) Time / date Viewing To adjust contrast To return to TV Press once to have picture and text. Press again to return to TV. (Press twice) As the blue bar is displayed Viewing Teletext DIRECT TV REC TV Using Analogue teletext Reveal hidden data Reveal hidden words e.g. quiz page answers Re-hide red red FULL / TOP / BOTTOM green (TOP) (BOTTOM) Normal (FULL) (Expand the TOP half) (Expand the BOTTOM half) (Continued) 19

20 Viewing Teletext Using Analogue teletext (Continued) HOLD INDEX If you wish to hold the current page without updating Stop automatic updating To resume Return to the main index page Subtitles View in multi window Store frequently viewed pages View subtitles by pressing STTL button Factory setting is P888 (subtitle service) on blue button (List mode). Watch TV and Teletext in two windows at once Operations can be made only in Teletext screen. Each time pressed: Teletext TV and Teletext TV Store frequently viewed pages in the colour bar As page is displayed Corresponding colour button To change stored pages Colour button you want to change press and hold The number changes to white. Enter new page number press and hold (List mode only) If you wish to use Subtitles, do not change number on blue button. View sub page (Only when teletext is more than one page) Appears at top of the screen 20 View sub page Watch TV while waiting for update To view specific sub page Enter the blue 4-digit number example: P6 Sub pages: The number of sub pages varies depending on the broadcasters (up to 79 pages). It may take some time for searching, during which time you can watch TV. View the TV picture while searching for a teletext page Teletext automatically updates itself when new information becomes available. Changes to TV screen temporarily P108 Appears when updating is View the yellow completed yellow updated page (You cannot change the channel.) The news page provides a function that indicates arrival of latest news ( News Flash ).

21 How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions. INPUT OPTION SD CARD Display the menu VIERA Link Main Menu Picture Sound Setup Picture Menu 1/2 Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance Colour Management P-NR Picture Menu Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance Colour Management P-NR Displays the functions that can be set (varies according to the input signal) Select the menu (example: Picture Menu) Select the item Auto Warm Off Off Adjust or (example: Picture Menu) Auto Warm Off Off 1/2 change store or (Required by some functions) How to Use Menu Functions (picture, sound quality, etc.) Viewing Teletext Viewing MULTI WINDOW DIRECT TV REC To return to TV at any time Colour Balance (example: Picture Menu) Choose from among alternatives Number and positions of alternatives Normal Changed Adjust using the slide bar Advanced To return to the previous screen Note To initialize all settings Shipping Condition (p. 32) Sharpness Moved Go to the next screen Tuning Menu Displays the next screen To change menu pages up down 21

22 How to Use Menu Functions Menu list Menu Item Adjustments / Configurations (alternatives) 22 VIERA Link Picture Sound VIERA Link Control Speaker Selection Viewing Mode Contrast, Brightness, Colour, Sharpness Tint Colour Balance Colour Management P-NR 3D-COMB Reset to Default Mode Bass Treble Balance Headphone Volume Surround Volume Correction Preferred Multi Audio NICAM HDMI1 Input Audio Description Menu Audio Description Volume Speakers Headphones Reset to Default Controls the connected Panasonic equipment and control the connected equipment by VIERA remote control (p. 43) Speaker control (p. 43) You can also VIERA Link Menu directly using the VIERA Link button on the remote control. Selects four different screen settings (Dynamic / Normal / Cinema / Auto) Dynamic : Provides enhanced picture contrast and sharpness when viewing in a bright room Normal : Recommended for viewing under normal ambient room lighting conditions Cinema : For watching movies in a darkened room producing a cinema-like picture Auto : Adjusts picture settings automatically dependent on ambient lighting conditions In each Viewing Mode setting, Contrast, Brightness, Colour, Sharpness, Tint (in NTSC only), Colour Balance, Colour Management and 3D-COMB can be adjusted and stored to suit your particular viewing requirement (e.g., you may require different settings for viewing sports, films, news etc.) Set for each input signal Changes will be stored automatically Increases or decreases the levels of these options according to your personal preference With an NTSC signal source connected to the TV, the picture hue can be adjusted to suit your taste Allows you to set the overall colour tone of the picture (Cool / Normal / Warm) Automatically adjusts colours to vivid ones (Off / On) Not valid on PC signal Picture Noise Reduction Automatically reduces unwanted picture noise and flicker noise in the contoured parts of a picture (Off / Min / Mid / Max) Not valid on PC signal Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen Set to On to display sharper and more accurate colours (Off / On) For PAL or NTSC signal reception only Not valid on RGB, S-Video, components, PC, HDMI and SD Card Analogue mode only Press the OK button to reset the present Picture Mode to the default settings P-NR is reset to Off (Analogue) or Min (DVB) Select two different sound settings (Music / Speech) In each Sound Mode setting, Bass and Treble can be adjusted and stored to suit your particular sound requirement Changes to any settings in a mode will affect all signal sources Sound quality can be improved Increases or decreases level to enhance or minimise lower, deeper sound output Increases or decreases level to enhance or minimise sharper, higher sound output Adjusts volume level of right and left speakers Adjusts the volume of the headphones Surround sound settings (Off / On) Provides a dynamic enhancer to simulate improved spatial effects Switching is also possible by the Surround button on the remote control (p. 7) Adjusts volume of individual channel or input mode Selects the preferred language for DVB multi audio (depending on the broadcaster) NICAM (Near Instantaneous Companded Audio Multiplex) A format for digital sound over television Reproduces stereo sound (Off / On) Off if reception is poor (FM monaural sound) Analogue mode only Select to fit the input signal (Auto / Digital / Analogue) (p. 41) Auto : Automatic detection of digital or analogue sound source Digital : HDMI cable connection Analogue : HDMI-DVI adapter cable connection HDMI input mode only HDMI2 terminal is for digital signal only No setting for HDMI2 available Useful for visually-impaired viewers (Off / On) Select On to sound the description sound if the programme has the signal Adjusts the volume for audio description Set to On to active the description sound track from TV speakers (Off / On) Set to On to active the description sound track from headphones (Off / On) Press the OK button to reset the present Sound Mode to the default settings Effective to Bass, Treble, Balance and Headphone Volume

23 Menu list Menu Item Adjustments / Configurations (alternatives) DVB Timer Programming Records future programmes (p. 36) DVB Profile Edit Creates list of favourite programmes (p. 29) DVB Service List Skips the unwanted DVB channels (p. 29) Selects which AV terminal is to be used for data communication between this TV and a compatible recording equipment (AV1 / AV2) (p. 40) Q-Link Select the connected terminal to the recording equipment even it is not compatible with Q-Link. Chooses the signal to be transmitted from the TV to Q-Link (Analogue / DVB / AV1 / AV2 / AV3 / Monitor) AV1 / AV2 out Monitor: Image displayed on screen Component, PC and HDMI signals cannot be outputted Downloads analogue channel information to a Q-Link compatible equipment connected Download to the TV Child Lock Locks a programme channel to prevent to it (p. 29) Auto Setup Automatically sets the channels received in the area (p. 30) Analogue Programme Edit Edits analogue channels (p. 31) DVB Manual Tuning Sets the DVB channels manually (p. 31) Analogue Manual Tuning Sets the analogue channels manually (p. 31) Add New DVB Services Adds new DVB services (p. 31) New Service Selects whether to give a notification message when a new DVB service is found Message (p. 31) DVB Signal Condition Checks the DVB signal condition (p. 31) Off Timer Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) Set to TV to view picture from TV tuner. Power on Set to AV to view input from an external equipment connected to a SCART terminal, e.g. satellite receiver (TV / AV) Preference The external equipment must be switched on and sending a control signal for automatic switching at power on to occur Teletext Analogue teletext display mode (FASTEXT / List) (p. 19) Selects the preferred language for DVB subtitles (depending on the broadcaster) Preferred Subtitles To display subtitles p. 13 Shipping Condition Resets all settings, for example, when moving house (p. 32) Owner ID Inputs the owner ID (p. 33) Common Interface Uses include to watch pay-tv (p. 27) System Update Downloads new software to TV (p. 27) Selects the screen area displaying the image (Off / On) On : Enlarged the image to hide the edge of the image. Off : Displayed the image in the original size. Picture Overscan Set to On if noise is generated on the edge of the screen. This function is available when aspect is set to Auto or 16:9. This function can be memorized for SD (Standard definition) and HD (High definition) signals separately. Input Labels Labels or skips each input terminals (p. 34) Banner Display Sets how long the information banner (p. 13) stays on screen Timeout 0 (No display) to 10 sec. in 1-sec. increments VIERA Link Sets to use VIERA Link functions (Off / On) (p. 42) Software Licence Displays the software licence information System Information Displays the system information of this TV A different menu will be displayed while PC or SD Card is used. (p. 35 and p. 39) Only available items can be ed. Setup Q-Link Settings Tuning Menu How to Use Menu Functions (picture, sound quality, etc.) Advanced 23

24 How to Use Menu Functions Overview How to operate (p. 21) Main Menu VIERA Link VIERA Link Menu VIERA Link Control Speaker Selection Recorder Home Cinema (p. 43) The menu of the ed equipment Picture Sound Setup Picture Menu Viewing Mode Contrast Brightness Colour Sharpness Tint Colour Balance Colour Management P-NR Auto Warm Off Off 1/2 Only available in NTSC Not available in PC Not available in PC Only available in NTSC / PAL Only available in PC Picture Menu 3D-COMB Advanced PC Settings Reset to Default Off Set 2/2 (p. 22) Advanced PC Settings R-Gain G-Gain B-Gain Gamma 2.2 Reset to Default Set (p. 35) Sound Menu Mode Bass Treble Balance Headphone Volume Surround Volume Correction Preferred Multi Audio NICAM Music Off English Off 1/2 Only available in DVB Only available in Analogue Only available in DVB Audio Description Menu Audio Description Volume Speakers Headphones Off Off Off (p. 22) Only available in DVB Only available in DVB Only available in DVB Only available in Analogue Sound Menu HDMI1 Input Audio Description Reset to Default Setup Menu Auto Set PC Setup DVB Timer Programming DVB Profile Edit DVB Service List Q-Link Settings Child Lock Tuning Menu Off Timer Off Power on Preference Teletext TV FASTEXT 2/2 (p. 22) 1/3 Only available in PC PC Setup Input Resolution Clock H-pos V-pos Clock Phase Sync Reset to Default VGA H & V Set (p. 35) Only available in DVB Only available in DVB Setup Menu Preferred Subtitles Shipping Condition Owner ID Common Interface System Update Picture Overscan Input Labels Banner Display Timeout VIERA Link English On 3 seconds On 2/3 Setup Menu Software Licence System Information 3/3 (p. 23) 24 NTSC (National Television System Committee): One of television signal used in USA, etc.

25 DVB Timer Programming Wed 05/08/04 18:50 Pos. Name Date Start End min. 1 BBC1 6/8 FR 18:00 20: ITV1 7/8 SA 21:30 22:30 60 Off Off (p. 37) Profile Editor All DVB Services 1 BBC One Wales 7 BBC THREE 14 E4 70 CBBC Channel 72 Cartoon Nwk 105 BBCi 719 BBC Radio Wales 720 BBC Radio Cymru Profile 1 Wed 12/05/04 10:46 (p. 29) Q-Link Settings Q-Link AV2 out Download Child Lock Change PIN Service List AV2 DVB Analogue Programme Edit Prog. Chan. Name 1 CH CH21 X Y Z 3 CH21 F T P 4 CH60 5 CH (p. 31) Auto Setup - Digital and Analogue (p. 23) (p. 29) Digital Scan Analogue Scan Channel Service Name Type Quality 62 CBBC Channel DVB BBC Radio Wales DVB BBC Radio Cymru DVB E4 DVB Cartoon Nwk DVB Analogue - 33 BBC1 Analogue - This will take about 3 mins. (p. 30) DVB Manual Tuning DVB Service List 70 CBBC Channel 72 Cartoon Nwk 105 BBCi 719 BBC Radio Wales 720 BBC Radio Cymru 1 BBC ONE Wales 7 BBC THREE (p. 29) Frequency [CH21] 474,00 MHz Signal Quality 0 10 Signal Strength 0 10 Prog. Channel Service Name Net ID. TS ID. Quality Stopped (p. 31) Analogue Manual Tuning Programme 1 [CH33] Manual Tuning (p. 31) Add New DVB Services How to Use Menu Functions (picture, sound quality, etc.) Only available in Analogue Only available in DVB Only available in Analogue Only available in DVB Only available in DVB Only available in DVB Shipping Condition All tuning data will be erased Are you sure? Are you sure? (p. 32) Tuning Menu Auto Setup Analogue Programme Edit DVB Manual Tuning Analogue Manual Tuning Add New DVB Services New Service Message Off On DVB Signal Condition Owner ID Please enter new PIN PIN * * * * (p. 30) 1 of 2 Please wait! This will take about 3 mins Prog. Channel Service Name Net ID. TS ID. Quality ZDF ARD (p. 31) DVB Signal Condition DVB Programme [70] CBBC Channel Signal Quality Off Signal Strength (p. 31) Advanced (p. 33) System Update Auto Update Search in Standby On System Update Search Now (p. 27) Input Labels AV1 AV2/AV2S AV3/AV3S COMPONENT PC HDMI1 HDMI2 DVD AV2/AV2S AV3/AV3S COMPONENT PC HDMI1 HDMI2 (p. 34) Common Interface Slot 1: Off 2 of 2 Module inserted (p. 27) 25

26 DVB Settings (DVB mode) DVB Settings provide to various advanced features. 1 If in Analogue mode Select DVB INPUT OPTION SD CARD 2 Display the menu 3 Select Setup Main Menu VIERA Link Picture Sound Setup 4 Select Common Interface or System Update Setup Menu Preferred Subtitles Shipping Condition Owner ID Common Interface System Update Picture Overscan Input Labels Banner Display Timeout VIERA Link English On 3 seconds On 2/3 TV 5 Set To return to TV 26

27 The Common Interface Module menu provides to software contained on Common Interface (CI) Modules. This TV receiver works only Pay TV modules complying with CI standard. Pay-TV Common Interface Caution CI slot Turn Off Mains power On / Off switch whenever inserting or removing the CI Insert or remove module. straightly If a view card and a card reader and come as a set, first insert the card completely reader, then insert the view card into CI module the card reader. Do not insert the module up side down. Rear of the TV Insert the CI module (optional) The features that appear on screen are dependent on the contents of the ed CI module. Normally pay-tv services will appear without and. If pay-tv services does not appear, perform and. For more details, see the manual of the CI module, or check with the broadcaster. Common Interface Common Interface Slot 1: Off 2 of 2 Module inserted Follow the on-screen instructions example:, go Coloured characters red green yellow blue On-screen operation guide may not correspond to the remote control buttons. DVB Settings (DVB) (pay-tv, software update) Update TV's software system System Update Download new software to TV. For details (p. 47) If System Update is performed, the software will be updated (it may change TV functions). If you do not wish to do so, set Auto Update Search in Standby to Off. Select Auto Update Search in Standby and then set On or Off System Update Auto Update Search in Standby On System Update Search Now To update immediately Select System Update Search Now set Searches for an update (for several min.) and displays a corresponding message if any On: Automatically performs a search in standby and downloads an update, if any software updates are available Download Download may take for about 20 min. Advanced 27

28 Editing Channels You can make your favourite channel lists, skip unwanted channels and control channel audience. 1 Select DVB or Analogue INPUT DVB Profile Edit and DVB Service List are available in DVB mode only. OPTION SD CARD 2 Display the menu 3 Select Setup Main Menu VIERA Link Picture Sound Setup 4 Select DVB Profile Edit, DVB Service List or Child Lock Setup Menu DVB Timer Programming DVB Profile Edit DVB Service List Q-Link Settings Child Lock Tuning Menu Off Timer Power on Preference Teletext Off TV FASTEXT 1/3 TV To return to TV 5 Set 28

29 Create your favourite channel list (Profile) from various broadcasters (up to 4: Profile 1 to 4). The list is added to Category in TV Guide (p. 14) and information banner (p. 13) and then easily ed. Select a channel and add it to the list A channel is added Profile Editor Wed 12/05/04 10:46 Profile Editor Wed 12/05/04 10:46 List favourite channels DVB Profile Edit (DVB mode) Skip unwanted channels DVB Service List (DVB mode) Control channel audience Child Lock All DVB Services 1 BBC One Wales 7 BBC THREE E4 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru To change the category Child Lock-PIN Entry Please enter new PIN PIN * * * * Child Lock Change PIN Service List Child Lock Service List red To edit Profile Service Name BBC One Wales BBC THREE E4 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru Type DVB DVB DVB DVB DVB DVB DVB DVB Profile 1 To display another Profile blue 1 of 2 Wed 12/05/04 10:46 Lock 720 Appears when the channel is locked To To change the PIN number Select Change PIN in and enter a new PIN number twice All DVB Services BBC One Wales BBC THREE E4 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru Profile 1 1 BBC One Wales You can lock specific channels and control who watches them. (When a channel is ed, a message appears; by entering the PIN number, you can watch the channel.) Enter the PIN number (4 digits) Select Service List Select the channel to be locked To add all channels to the list yellow Select the field of Profile to edit and: To name the Profile Select the character red To move the channel Select the new position Confirm green green To delete the channel To delete all channels yellow blue Store Channel numbers (known as logical channel numbers) cannot be changed, due to broadcast restrictions. You can hide unwanted services. The deleted services cannot be displayed except in this function. Use this function to skip unwanted services. Select a service and add / delete add / delete DVB Service List 70 CBBC Channel 72 Cartoon Nwk 105 BBCi 719 BBC Radio Wales 720 BBC Radio Cymru 1 BBC ONE Wales 7 BBC THREE Enter the PIN number twice at first setting. Make a note of the PIN number in case you forget it. To cancel Select the locked channel To lock all channels yellow cancel all channel locks Note Setting Shipping Condition (p. 32) erases the PIN number and all settings. set green :add :delete (skip) blue Editing Channels Advanced 29

30 Tuning Channels You can re-tune all TV channels when moving house or search for new services which may have recently started broadcasting. INPUT OPTION SD CARD 1 Select 2 DVB or Analogue DVB Manual Tuning, Add New DVB Services, New Service Message and DVB Signal Condition are available in DVB mode only. Analogue Programme Edit and Analogue Manual Tuning are available in Analogue mode only. Display the menu 3 Select Setup VIERA Link Main Menu Picture Sound Setup 4 Select Tuning Menu Setup Menu DVB Timer Programming DVB Profile Edit DVB Service List Q-Link Settings Child Lock Tuning Menu Off Timer Power on Preference Teletext Off TV FASTEXT 1/3 To return to TV 5 Select a function and set Tuning Menu Auto Setup Analogue Programme Edit DVB Manual Tuning Analogue Manual Tuning Add New DVB Services New Service Message Off On DVB Signal Condition Set DVB and Analogue channels automatically Auto Setup Automatically set the DVB and Analogue channels received in the area. If a Child Lock PIN number (p. 29) has been set, it must be entered. Start Auto Setup Settings are made automatically Auto Setup Auto Setup - Digital and Analogue All previous settings are erased. Digital Scan Analogue Scan All tuning data will be erased Channel Service Name Type Quality The analogue settings are 62 CBBC Channel DVB 10 Start Auto Setup 62 BBC Radio Wales DVB BBC Radio Cymru DVB 10 downloaded to a Q-Link compatible 62 E4 DVB Cartoon Nwk DVB Analogue - equipment connected to the TV. 33 BBC1 Analogue - This will take about 3 mins. When the operation is completed, the digital service at programme position 1 will be displayed. If no DVB services are found, the first analogue service will be displayed. If tuning has not done completely DVB Manual Tuning, Analogue Manual Tuning For Auto Setup, using the buttons on the top of the TV F TV AV Press repeatedly until Auto Setup appears 30 Auto Setup Start Auto Setup To return to TV

31 Edit Analogue channels Analogue Programme Edit Delete Add Move Change name Edit the analogue programme position settings Select the channel to edit Analogue Programme Edit Prog. Chan. Name 1 CH CH21 X Y Z 3 CH21 F T P 4 CH60 5 CH Cursor Edit To delete red After confirming, press red To add green After confirming, press green To move yellow Select new position yellow Channel To change channel number Analogue Manual Tuning Name 3 FTP 23:35 Corontation Street Profile 1 Change category For info press To change the name of the broadcaster displayed when ing channels Analogue Programme Edit Select the Prog. Chan. Name 1 CH Name field 2 CH21 X Y Z 3 CH21 F T P Enter the 4 CH60 red User input mode 5 CH Select the character Set (Maximum: five characters) Store Set DVB channel manually DVB Manual Tuning Set Analogue channel manually Analogue Manual Tuning Add DVB channel automatically Add New DVB Services Normally use Auto Setup or Add New DVB Services to add DVB channels to your service list. If tuning has not done completely, use this function. DVB Manual Tuning channel Frequency [CH21] 474,00 MHz Signal Quality 0 10 Signal Strength 0 10 Prog. Channel Service Name Net ID. TS ID. Quality Stopped Analogue Manual Tuning Programme 1 [CH33] Manual Tuning search All services found will be added to the DVB Service List (p. 29) automatically. Set Analogue channel manually after Auto Setup. If a VCR is connected with only the RF cable, programme position 0. Select the programme position Any new services found will be added to the DVB Service List (p. 29) automatically. Add New DVB Services The new service is added with the current settings Please wait! saved as they are. Prog. Channel Service Name Net ID. TS ID. Quality ZDF ARD This will take about 3 mins. Select the channel Search and store search store Tuning Channels Advanced Display a notification message New Service Message Check DVB signal DVB Signal Condition Selects whether to give a notification message when a new DVB service is found. (Off / On) Selecting OK (Auto Setup) will delete current Profile and Childlock settings. New DVB service found! Press OK to start Auto Setup. Press to lgnore. Selecting Auto Setup will delete current Profile and Childlock settings Selects a channel and checks the DVB signal condition. Use for adjusting the direction of the aerial. To change the programme A good Signal Strength is not an indication of (during the menu appears) suitable signal for DVB reception. Please use the Signal Quality indicator as follows: DVB Signal Condition Signal Quality: DVB Programme [70] CBBC Channel Green bar Good Signal Quality Off Signal Strength Yellow bar Poor Red bar Bad (Check the aerial) 31

32 Restore Settings Resets the TV to its original condition, i.e. no channels tuned in. All settings other than Owner ID (channels, picture, sound quality, etc.) are reset. 1 Display the menu INPUT OPTION SD CARD 2 Select Setup Main Menu VIERA Link Picture Sound Setup 3 Select Shipping Condition Setup Menu Preferred Subtitles Shipping Condition Owner ID Common Interface System Update Picture Overscan Input Labels Banner Display Timeout VIERA Link English On 3 seconds On 2/3 To return to TV 4 Set Check the message and initialise Restore Settings Shipping Condition Shipping Condition All tuning data will be erased Are you sure? Are you sure? Confirm Follow the on-screen instructions Auto Setup will automatically start when Mains power On / Off switch is next turned On. (p. 10) set To re-tune TV channels only, e.g. after moving house Auto Setup (p. 30) 32

33 Owner ID Entry of the security code (PIN number) and personal information (your name, address and post code). In the unfortunate event of theft it will help the Police to determine the owner. If you have skipped the Owner ID input in Auto Setup (p. 10), and input it later, start from. If you input the Owner ID in Auto Setup (p. 10), perform. INPUT OPTION SD CARD 1 Display the menu 2 Select Setup VIERA Link Main Menu Picture Sound Setup To return to TV 3 4 Select Owner ID Setup Menu Preferred Subtitles Shipping Condition Owner ID Common Interface System Update Picture Overscan Input Labels Banner Display Timeout VIERA Link Set English On 3 seconds On 2/3 Owner ID Restore Settings Input owner ID Owner ID Enter the PIN number (4 digits) Owner ID 1 of 2 Enter the PIN number twice at first setting. Please enter new PIN Make a note of the PIN number in case you PIN * * * * forget it. Change Select the entry field Enter the User input mode Select the character Set Page up 0 9 PIN entry Page down Enter your name, address, and post code, in that order Store To check the personal information stored Hold down for F TV AV about 3 sec. Displays the information on the screen (for several sec.) Owner ID NAME HOUSE NO POSTCODE A The PIN number is not displayed. Advanced To change the PIN number Select the PIN field Enter a new PIN number twice 33

34 Input Labels For easier identification and ion of the input mode, you can label each input terminals or skip terminal that is not connected to any equipment. (To the input mode p. 16) 1 Display the menu INPUT OPTION SD CARD 2 Select Setup Main Menu VIERA Link Picture Sound Setup 3 Select Input Labels Setup Menu Preferred Subtitles English Shipping Condition Owner ID Common Interface System Update Picture Overscan On Input Labels Banner Display Timeout 3 seconds VIERA Link On 2/3 TV To return to TV 4 Select a input terminal and set Input Labels AV1 AV2/AV2S AV3/AV3S COMPONENT PC HDMI1 HDMI2 DVD AV2/AV2S AV3/AV3S COMPONENT PC HDMI1 HDMI2 set The labels you set will be displayed in Input Selection menu (p. 16) or banner. If Skip is ed, you cannot the mode. User input You can name each input terminals freely. Select User input Set characters Store User input Name A B C D E F G H I J K L M N U V W X Y Z a b c d e f g h i j k l m n u v w x y z ( ) + -. * _ O P Q R S T 7 8 9! : # o p q r s t set 34 (maximum: ten characters)

35 Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. To connect PC (p. 44) INPUT OPTION SD CARD 1 Select the external input Picture Advanced PC Settings To return to TV R-Gain G-Gain B-Gain Gamma (2.0 / 2.2 / 2.5) Input Resolution Clock H-pos 2 Select PC Input Selection AV1 AV2/AV2S AV3/AV3S COMPONENT PC HDMI1 HDMI2 TV PC menu setting (changed as desired) To make settings How to Use Menu Functions to (p. 21) Adjusts the white balance for red areas Adjusts the white balance for green areas Adjusts the white balance for blue areas Switches to a wide view VGA ( pixels), WVGA ( pixels), XGA (1, pixels), WXGA (1, pixels) Options change depending on signals Set to the minimum level if noise occurs Adjusts horizontal position Corresponding signals (p. 49) If H-freq. or V-freq. is shown in red, the signals may not be supported. Menu Item Adjustments / Configurations (options) Displaying PC Screen on TV Input Labels Advanced Setup PC Setup V-pos Adjusts vertical position Clock Phase Eliminates flicker and distortion Adjust after Clock adjustment Set to the minimum level if noise occurs Chooses another synchronous signal if the image is distorted (H & V / On G) Sync H & V : by the horizontal and vertical signals from your PC On G : by the green signal from your PC (if available) Other items p. 22 and p

36 Recording Controls (DVB mode) Timer Programming from Menu The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the DVB system will switch on and tune to the correct station (even if the TV is in Standby mode). TV Guide may also be used to set timer programmes. (p. 14) If the recording equipment is compatible with Q-Link or similar technologies (p. 40), and setup / connection are done completely (p. 40 and p. 44), you do not need to programme the equipment the DVB system will control the recording progress. If the recording equipment is not compatible with Q-Link or similar technologies, set Q-Link in Setup Menu (p. 23) to the connected terminal (AV1 or AV2), and make timer programming of the recording equipment (Read the manuals of the equipment). 1 If in Analogue mode Select DVB INPUT OPTION SD CARD 2 Display the menu 3 Select Setup Main Menu VIERA Link Picture Sound Setup 4 Select DVB Timer Programming Setup Menu 1/3 DVB Timer Programming DVB Profile Edit DVB Service List Q-Link Settings Child Lock Tuning Menu Off Timer Power on Preference Teletext Off TV FASTEXT To return to TV To stop recording 5 Set 6 Store store 36 Caution The TV must either be On or in standby. For preparations of a recording equipment, read the manual of equipment. No other DVB channel can be ed during recording. However you can watch analogue channels. It may not be possible to record an encrypted programme (which is copy-protected).

37 0 9 Set timer programming details Start making the settings Previous timer programming event Current timer programming event start DVB Timer Programming Wed 05/08/04 18:50 Pos. Name Date Start End min. 1 3 BBC1 ITV1 Channel Date one day ahead daily or weekly (press repeatedly) the item 6/8 FR 7/8 SA To change a timer programming event Select the programme to be changed using Correct as necessary (as above) To cancel a timer programming event Select the programme to be deleted using Repeat the operations as below, and set items in the order of to 18:00 20: :30 22:30 60 Off Off Ending time Starting time and press set Subtitles (Off / Auto) Recording time (automatic display) Daily SU-SA: Sunday to Saturday Daily MO-SA: Monday to Saturday Daily MO-FR: Monday to Friday Weekly SA/FR/TH/WE/TU/MO/SU: Same time on the same day every week and press red, and can also be entered with numeric buttons. Recording Controls (DVB) Direct TV recording: You can record the current programme to DVD Recorder or VCR immediately. (p. 40) Note Confirm the DVB LED lights (Orange). If not, a timer programming is not available. A message will appear if you try to programme a timer event which overlaps an already programmed event. 2 min. before the starting time: a reminder message appears. (To remove the message ; To cancel the programming ) 10 sec. before the starting time: in DVB mode, the TV automatically s the programmed channel. Cancelling the programming may not be valid immediately before the starting time. In this case, directly operate the recording equipment to cancel recording. Advanced TV Guide Electronic Programme Guide (EPG) Timer Recording View TV Guide There are two styles of display for TV Guide (Landscape / Portrait) Select the programme to be broadcast DVB Timer Programming Wed 05/08/04 18:50 Pos. Name Date Start End min. 1 BBC1 6/8 FR 18:00 20: Off 3 ITV1 7/8 SA 21:30 22:30 60 Off DVB LED will turn on if Timer Programming is set. Select timer Edit timer DVB LED Delete Orange DVB LED set (Timer Programming screen) (Rapid blinking during recording) To check / change / cancel a timer programming event Timer Programming (above) 37

38 Viewing from SD Card The still images recorded by the digital camera will be displayed. 1 Insert the SD Card Warning message for output signal is displayed. Signal output from all AV terminals will be disabled during SD card view. Press OK to proceed. Press to return to TV viewing. INPUT 2 Enter SD mode (Photo View Mode) OPTION SD CARD 3 Selected photo Select the photo to be viewed Error display (images that could not be loaded, etc.) Photo View Mode 1/17 Filename Date 23/10/2006 Pixel 1600 x 1200 Reading Select View Select MENU view Slide show red For details, see p Slide show Selected photo information is displayed View To display the operation guide (Thumbnail screen) or OPTION To previous photo Rotate 90 (anti-clockwise) Operation guide Single view Rotate Prev Select MENU List Rotate Slide show Displayed one at a time To next photo Rotate 90 (clockwise) To return to thumbnail screen TV To return to TV SD CARD or Caution During the operation, no signals are output from the monitor output terminals. Date shows the date on which the recording was made by the digital camera. It shows **/**/**** when recordings are made without date signal. 38 Cautions in handling SD Card Do not remove the card while the TV is ing data (this can damage card or TV). Do not touch the pins on the back of the card. Do not subject the card to a high pressure or impact. Insert the card in the correct direction (otherwise, card may be damaged). Electrical interference, static electricity, or erroneous operation may damage the data or card. Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the TV. (Panasonic is not liable for any deterioration or damage of recorded data.)

39 (Photos) For details on SD Cards (p. 48) To insert To remove SD Card Start Slide show (operate in step or ) Select the photo for the first view Start Slide show Slide show settings (operate in step or ) Display the Select Viewing Setup Select the functions and set menu Main Menu Picture Viewing Setup Slide show red Viewing Setup Interval Repeat 5 seconds Off Picture Menu (p. 22) Menu Item Adjustments / Configurations (alternatives) Viewing Setup Interval Repeat Label surface Message Push until a click is heard Select slide show interval (5 / 10 / 15 / 30 / 60 / 90 / 120 seconds) Slide show repeat (Off / On) On screen messages Press the centre of the card To pause Meaning / Action set Viewing from SD Card (Photos) Advanced Is SD Card in? Insert a SD card. No valid file to play Cannot read file The card has no data. The file is broken or unreadable. The TV does not support the format. (For the applicable formats and data, see p. 48.) 39

40 Q-Link Functions Q-Link connects the TV and VCR / DVD recorder, enables easy recording and playback. Condition Use the VCR / DVD recorder with the following logos: Q-Link, NEXTVIEWLINK, DATA LOGIC, Easy Link, Megalogic, or SMARTLINK Connect the equipment to this TV s AV1 or AV2 terminal via a fully-wired SCART cable. (p. 44) Q-Link terminal setup in Setup Menu (Q-Link, AV1 / AV2 out). (p. 23) Download analogue channel settings Perform Auto Setup. (p. 30) When first using this TV, see Auto Setup. (p. 10) Perform download to the equipment. (p. 23) Features available Some recording equipments are not applicable. Read the manuals of the equipment. What you see is What you record Direct TV Recording: Recording the current programme in VCR / DVD recorder immediately. When Direct TV Recording is performed, the recording equipment is automatically turned on if it DIRECT TV REC is in Standby mode. The recording equipment is recording from its own tuner. You can turn the TV off during recording (Analogue only). If you turn the TV off during recording from an AV source, the recording will be stopped. When Direct TV Recording is performed while watching DVB channel, the DVB programme position is locked and no other DVB channel can be ed. However you can watch analogue channels. To change DVB channel, stop recording Information / Message Recording information or if recording is not possible, a message is displayed. (Only when the programme number is 0 or AV mode for some equipment.) Power on link and Easy playback When VCR or DVD recorder starts playback or direct navigator / function menu for the equipment are activated, the TV is turned on and input mode is switched automatically so that you can view the content. (Only when TV is in Standby mode.) Power off link When TV is set to Standby mode, the recording equipment is also automatically set to Standby. (Only when the videocassette or DVD is not active.) 40 DATA LOGIC (a trademark of Metz Corporation) Easy Link (a trademark of Philips Corporation) Read the manuals of the equipment too. Megalogic (a trademark of Grundig Corporation) SMARTLINK (a trademark of Sony Corporation)

41 HDMI Functions HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and highquality sound by connecting the TV and the equipment. HDMI-compatible equipment ( 1) with an HDMI or DVI output terminal, such as a set top box or a DVD player, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable. About connections, see External Equipment (p. 44). Note HDMI is the world s first complete digital consumer AV interface complying with a non-compression standard. If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable ( 2). When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (HDMI1: use COMPONENT-AUDIO terminals). Audio settings can be made on the HDMI1 Input menu screen. (p. 22) Applicable audio signal sampling frequencies (2ch L.PCM): 48 khz, 44.1 khz, 32 khz HDMI2 terminal is for digital audio signal only. Use with a PC is not assumed. If the connected equipment has an aspect adjustment function, set the aspect ratio to 16:9. These HDMI connectors are type A. These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection. An equipment having no digital output terminal may be connected to the input terminal of either Component, S-VIDEO, or Video to receive analogue signals. The HDMI input terminal can be used with only the following image signals: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment. For details of the applicable HDMI signals, see p. 49. ( 1): The HDMI logo is displayed on HDMI-compliant equipment. ( 2): Enquire at your local digital equipment retailer shop. Summary of Control functions Connecting with an HDMI cable to Panasonic equipment with VIERA Link function, you can control the equipment (p. 42). You can use VIERA Link and Q-Link functions together. HDMI Functions Q-Link Functions Function Connection VIERA Link and Q-Link VIERA Link only Q-Link only (HDMI) (SCART) (HDMI) (SCART) Easy playback O O O Power on link O O O Power off link O O O Speaker control and control the connected equipment by VIERA remote control Direct TV Recording Analogue channel download O (not via SCART) O (not via SCART) O (not via HDMI) O (not via HDMI) O - O - - O - O Advanced 41

42 HDMI Functions Enjoy additional HDMI Inter-Operability with Panasonic products which have HDAVI Control function. This TV supports HDAVI Control 2 function. Connections to some Panasonic equipment (DVD Recorder DIGA, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI cables allow you to interface them automatically. The equipment with HDAVI Control function enables the following operations: Easy playback (p. 43) Power on link (p. 43) Power off link (p. 43) Speaker control (p. 43) In addition, the equipment with HDAVI Control 2 function enables the following operation: and control the connected equipment by VIERA remote control (p. 43) These features are limited to models incorporating Panasonic s HDAVI Control and VIERA Link. VIERA Link HDAVI Control, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers equipment that supports HDMI CEC cannot be guaranteed. Refer to individual manuals for compatibility information. About applicable equipment, consult your local Panasonic dealer or refer to the URL: HDMI cable This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic s HDMI cable. Recommended part number: RP-CDHG15 (1.5 m) RP-CDHG30 (3.0 m) RP-CDHG50 (5.0 m) Preparations Setup the equipment to enable this function. Read the manuals of the equipment. About connections, see External Equipment (p. 45). Read the manuals of the equipment too. For the first time / When adding new equipment, reconnecting equipment or changing setup After connection turn the equipment on and then switch the TV on. Select the input mode to HDMI1 or HDMI2 (p. 16), and make sure that an image is displayed correctly. INPUT OPTION SD CARD 1 VIERA Link Control TM Display the menu 2 Select Setup Main Menu VIERA Link Picture Sound Setup 3 Select VIERA Link Setup Menu 2/3 Preferred Subtitles English Shipping Condition Owner ID Common Interface System Update Picture Overscan On Input Labels Banner Display Timeout 3 seconds VIERA Link On 42 4 Set to On (default is On) set

43 and control the connected equipment by VIERA remote control Easy playback Power on link Power off link Speaker control You can control some functions of the connected Panasonic equipment with this TV remote control (point the remote control at the TV s signal receiver). If you cannot the menu, check the settings and the equipment (p. 42). and operate the menu of the equipment Display VIERA Link Menu Select VIERA Link Control VIERA Link Menu VIERA Link Control Speaker Selection Return to the previous menu red greenyellow blue About the operations for the equipment, read the manual of the equipment. Automatic Input switching-when the connected Panasonic equipment is operated, input mode is switched automatically. When it is stopped operating, input mode is returned. When the connected Panasonic equipment starts playback or direct navigator / function menu for the equipment are activated, the TV is automatically turned on. (Only when TV is in Standby mode.) When TV is set to Standby mode, the connected Panasonic equipment is also automatically set to Standby. This function will work even if the TV enters standby mode automatically by Off Timer function or auto power standby function. You can control the theatre speaker with TV s remote control. This function is available when Panasonic Amplifier or Player theatre is connected. If you cannot the menu, check the Home Cinema settings and the equipment (p. 42). Amplifier or Player theatre will be automatically Display VIERA Link Menu turned on (if it is in Standby mode) and the sound is Select Speaker Selection from theatre speakers connected to the equipment. VIERA Link Menu Volume up / down VIERA Link Control Speaker Selection Recorder Home Cinema Select the equipment you want to Home Cinema means Player theatre, Recorder theatre and Amplifier. When the equipment with HDAVI When the equipment with Control 2 function is connected HDAVI Control function is connected VIERA Link Menu VIERA Link Control Speaker Selection Recorder / Player / Home Cinema / Video Camera Displayed the type of the connected equipment. Select the type of the equipment and. Recorder Home Cinema Move the cursor / / adjust Store / set / Recorder Home Cinema Set to Home Cinema or TV set VIERA Link Menu VIERA Link Control Speaker Selection Recorder / Player / Home Cinema / Video Camera Displayed the type of the connected equipment. But you cannot it. Use its own remote control to operate the equipment. OPTION Recorder Home Cinema When other type or other manufacturer of the equipment is connected VIERA Link Menu VIERA Link Control Others Speaker Selection Home Cinema The menu of the ed Others equipment Others is displayed. (Input mode will be changed You cannot it. Use its own remote automatically) control to operate the equipment. Operate the menu of the equipment Available VIERA remote control buttons (depending on the connected equipment): Move the cursor / the menu Exit the menu Display the operation guide for the equipment The same functions with the OPTION button of the equipment when the key words are displayed on colour bar Mute The sound of TV speakers is mute. When the equipment is turned off, TV speakers will be active. TV TV speakers are active. HDMI Functions Advanced 43

44 External Equipment These diagrams show our recommendations for how to connect the TV to your various equipment. For other connections, consult the instructions for each piece of equipment, the table below, and the specifications (p. 54). Fully wired HDMI compliant cable Fully wired HDMI compliant cable PC R L AUDIO OUT Y V I D E O C O PB PR M PO L N E N T (M3 stereo mini plug) A U D I O R (AUDIO) (VIDEO) or (S-VIDEO) AV1 RGB VIDEO AV2 RGB VIDEO S VIDEO Headphones To adjust volume Headphone Volume in the Sound Menu (p. 22) Camcorder / Game equipment Types of connectable equipment to each connector Connector AV1 AV2 AV3 (Side of TV) COMPONENT Y PB AUDIO OUT PR 44 Recording / Playback (equipment) To record / playback videocassettes / DVDs (VCR / DVD recorder) To watch DVDs (DVD player) To watch camcorder images (Video camera) To watch satellite broadcasts (Set top box) To play games (Game equipment) To use amplifier with speaker system Q-Link Direct TV Recording VIERA Link : Recommended Connection L R 1 2

45 To watch satellite broadcasts HD Satellite receiver To record / playback DVD Recorder / VCR RF cable or HDMI equipment SCART cable SCART cable DVD Recorder PC (Viewing) (Listening) Conversion adapter (if necessary) Computer To listen with speakers RCA cable (Viewing) (Listening) Amplifier with speaker system To watch DVDs DVD player External Equipment VIERA Link (p. 42) Use fully wired HDMI compliant cable. Read the manuals of the equipment too. Easy playback, and control the connected equipment by VIERA remote control Home Cinema HDMI cable HDMI cable RCA cable Panasonic Amplifier HDMI cable Speaker system Advanced HDMI cable HD Video Camera HDMI cable RCA cable Panasonic DVD Recorder Panasonic Player theatre Speaker system Panasonic DVD Recorder, HD Video Camera, etc. 45

46 Technical Information Aspect Control Signal Aspect modes Widescreen signal (WSS) Control signal through SCART (pin 8) or HDMI terminal Signal name Auto 16:9 14:9 4:3 Zoom1 Zoom2 Zoom3 TV AV1 AV2 AV3 Component AV1 AV2 HDMI1 HDMI2 PAL O O O O O O O O O O O - O O - - PAL 525/60 O O O O O O O O O - - DVB O O O O O O O O M.NTSC O O O O O O O O O - - NTSC (AV input only) O O O O O O O O O (480)/60i O O O O O O O O O 525(480)/60p O O O O O O O O O 625(576)/50i O O O O O O O O - - O O 625(576)/50p O O O O O O O O - - O O TV/AV1/AV2/AV3 SD HD Component/HDMI Aspect Ratio The optimum size and aspect can be chosen, and you can enjoy finer images. (p. 13) Auto: Auto aspect determines the best aspect ratio to use to fill your screen. It does this using a four step process to determine if the picture being viewed is a widescreen picture. If Auto aspect detects a widescreen signal it switches into the appropriate 16:9 or 14:9 widescreen mode. If Auto aspect does not detect a widescreen signal then this advanced TV enhances the picture for optimum viewing pleasure. The text shown on the screen indicates how Auto aspect determined which ratio to use: WIDE appears in the top left of the screen if a widescreen identification signal (WSS) is found or a signal found through a SCART terminal. Auto aspect switches to the appropriate 16:9 or 14:9 widescreen ratio. This function will also work in any aspect mode. Auto appears in the top left of the screen if black stripes above and below the picture are detected. Auto aspect chooses the best ratio and expands the picture to fill the screen. This process can take several minutes, depending on the darkness of the picture. 750(720)/50p O O O O O O O O O 750(720)/60p O O O O O O O O O 1125(1080)/50i O O O O O O O O O 1125(1080)/60i O O O O O O O O O 1125(1080)/50p O O O O O O O O O 1125(1080)/60p O O O O O O O O O 1125(1080)/24p O O O O O O O O O PC input - O - O Note The ratio varies depending on the programme, etc. If the ratio is greater than the standard 16:9, black bands may appear at the top and bottom of the screen. If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR, adjust the tracking of the VCR. (See the VCR manual.) Aspect mode can be memorized for SD (Standard definition) and HD (High definition) signals separately. To the ratio manually: (Only 16:9 or 4:3 in PC mode) Auto 16:9 The best ratio is chosen and the Directly displays the image at 16:9 picture expanded to fill the screen. without distortion (anamorphic). 14:9 Displays the image at the standard 14:9 without enlargement. 4:3 Displays the image at the standard 4:3 without distortion. Zoom1 Displays a 16:9 letterbox or 4:3 image without distortion. Zoom2 Displays a 16:9 letterbox (anamorphic) image full-screen without distortion. 46 Zoom3 Displays a 2.35:1 letterbox (anamorphic) image full-screen without distortion. At 16:9, displays the image at its maximum (with slight enlargement).