PSMS English. v rev.10. Default access data: (LAN 1) (LAN 2) User: gss Password: gss

Transcription

1 PSMS 1000 v rev.10 Default access data: (LAN 1) (LAN 2) User: gss Password: gss KLASSE CLASS English GSS Grundig SAT Systems GmbH Beuthener Strasse 43 D Nuremberg Phone: +49 (0) 911 / Fax: +49 (0) 911 / info@gss.de Internet:

2 Inhaltsver zeichnis 1 Sicherheitsvorschriften Declaration concerning copyrights General information Meaning of the symbols used Technical data System requirements Description...7 Block diagram of a complete system Operation via the Graphical User Interface...9 Notes on IP addresses...9 Notes on port setting...9 Tips to keep the overview!...10 Two groups of IPTV transport streams...10 Which group appears in which menu?...10 FTP Access...11 Information videos, Trailers...11 File format...11 File location...11 Fix Permissions Graphical User Interface Menu structure...13 Sections System section...14 Time setting IPTV-CMS section...15 Guest Check In Menu Rooms...15 Enter guest s data...16 Group Check in...16 Check-out...16 Show assigned STBs...17 Managing the connected STBs...17 Register a STB at the Multimedia Server...17 "TV Only operation" / "Remote operation"...17 Remote control a STB...18 Restart a STB...19 Do not remove a STB accidentally Operating Instructions PSMS 1000

3 Alarm screen...19 Generate an alarm screen...19 Activate the alarm screen...20 Deactivate an Alarm...20 Leave the CMS Configuration Multimedia Section...21 Record...21 Prepare a manual recording...21 Start a record...22 Prepare a time controlled recording...22 Abort a record...23 Delete a record source from the source list...23 Playout...23 Prepare playbacks...24 Start playback...24 Stop playback...25 Delete a playback source from the source list...25 Delete recorded video files Controlling the Amino STBs...26 Buttons for controlling the Amino STBs...26 Welcome screen...26 Main menu...27 TV and Radio operation...27 Switch off the device Installation...28 Anhang A...29 A1 Integrate/exchange a Hard Disk Drive (SSD/HDD)...29 A2 Short Instruction of the Remote Control Operating Instructions PSMS 1000

4 1 Sicherheitsvorschriften Operate the system so it will not be able to vibrate - in a dust-free, dry environment - in such a manner that it is protected from moisture, fumes, splashing water and dampness - somewhere protected from direct sunlight - not within the immediate vicinity of heat sources - in an ambient temperature of the cassette of 0 C to +50 C (max. ambient temperature of the head-end station +30 C). In case of the formation of condensation wait until the system is completely dried. The cassette slot directly on the right of a PSMS 1000 must always remain free. Ensure that the head-end station is adequately ventilated. Do not cover the ventilation slots! If additional fans are to be used to circulate the air, ensure that the system will be shut down (disconnected from mains) should any one of the fans fail. Do not place any vessels containing liquids on the head-end station. Do not place anything on the head-end station which could initiate fires (e.g. candles). No liability is accepted for damage caused by faulty connections or inappropriate handling of the device. 1.1 Decl ar ation concerning copyrights The PSMS 1000 is intended for the record/playback of TV picture and sound signals ("Materials"). The use must be taken place in conformance with applicable laws, license agreements or service agreements under which you have obtained access to such Materials. Any other use is expressly prohibited. It is Your responsibility to comply with, and you agree to be bound by, all such applicable laws and agreements. Unauthorized recording, copying, streaming of copyrighted material, or providing copies of such material to others, may infringe the rights of copyright owners and may also be a criminal offence in some jurisdictions. Prior permission from the copyright owners may be required for certain public performances and certain commercial uses. You agree to indemnify and hold harmless Grundig SAT Systems and its Licensors against any breach by You of applicable copyright restrictions in connection with your use of PSMS Operating Instructions PSMS 1000

5 2 General information 2.1 M eaning of the symbols used Important note > General note Performing works 2.2 Technical data The devices meet the following EU directives: 2006/95/EC, 2004/108/EC, 2011/65/EC The product fulfils the guidelines and standards for CE labelling (Page 31). Unless otherwise noted all values are specified as "typical". IPTV* Simultaneous possible streams (dependent on the data rate): SSD... up to 16 x HD / LAN interface (16 x HD record + 16 x HD playback or 32 x HD playback) Protocols...UDP** multicast File format... SingleProgramTransportStream.ts Middleware Supported Set Top Boxes (STB)... Amino A140/H140 Number of supported STBs (expandable to max. 2000) DHCP server for STBs Connections LAN sockets... 2 x RJ BASE-T (IEEE 802.3) USB sockets...2 x USB A VGA socket...1 x Sub-D 15 RS-232 interface...1 x Sub-D 9 SSD/HDD slots...2 x 2.5" SATA II Connection strip (10-pin)... for supply voltages Ambient temperature Cassette...max. 50 C Head-end station...max. 30 C * IPTV=Internet Protocol Television ** UDP=User Datagram Protocol, Operating Instructions PSMS 1000

6 2.3 System requirements For the distribution of the IPTV streams a IGMP complient layer 3 switch as well as a GBit LAN network is required. In order to avoid restrictions of the network data rate (and therefore possible disturbances) we recommend to operate other applications like e.g. Internet, VOIP telephony etc. in separated networks. Please note that the quality of the output signal depends on the quality of the input signal. The cassette is intended for use in the PROFI-LINE head-end stations. We recommend the use in combination with the Extension Unit PST The ambient temperature of the head-end station/cassette must not exceed 30 C/50 C. The compliance of the ambient temperature must be ensured by e.g. ventilation or air conditioning. An overheating of the processor core results in switching off the cassette. At overheating the server is switched off. In this case reduce the ambient temperature using adequate measures. To start the server again after cooling down, the power supply must be disconnected for a short time. Before the head-end station will be switched off stop the server via the graphical user interface (GUI) using button in order to end running processes. Stoppt den Server Stops the server We recommend the use of an UPS especially in regions with unstable power supply! Operating Instructions PSMS 1000

7 2.4 Description The cassette is a streaming server and can be modified by different software applications. The key component is the centralized management of connected IP-SetTop boxes (IP-STB) done by the GSS middleware. Using the Graphical User Interface e.g. channel lists as well as the management of the IP-STBs can be done intuitively. Via FTP access video files (exclusively "single program transport stream" format.ts) can be copied to the server. So the cassette is ideal to utilise at cable head-end stations to fed in info channels. In addition recording is possible. Record and playback are independent of one another and simultaneously possible. The cassette is equipped with two slots for 2.5" SATA II HDDs/SSDs. Each one LED indicates the operating state of the hard disk drives. LED indicator lights continuously blinking off Indication hard disk drive ready writing/reading no hard disk drive fitted Operating Instructions PSMS 1000

8 Block diagr a m of a complete system IP-Adresse : Port PHIS 1000 S PHIS 1000 S Control PC PSMS 1000 HDD Record 1.ts Record 2.ts Record 3.ts Middleware: Programme list Video on demand Greetings DHCP Server Record Trailer 1.ts Trailer 2.ts Trailer 3.ts Playback (Streaming) Service : 1234 Service : 1234 Service : 1234 Service : 1234 Service : 1234 Service : 1234 Service : 1234 Service : 1234 Communication Service : 1234 Service : 1234 Service : 1234 Service : 1234 Trailer via FTP Communication HSMS < > PC Stream : 1234 Stream : 1234 Stream : 1234 Stream xx : 1234 Communication Set Top Boxes IGMP + Layer 3 Switch Router IP Set Top Box Communication Services / Streams IP Set Top Box 50 PSPQ 1000 PSPT Communication Services / Streams Services / Streams Services / Streams Operating Instructions PSMS 1000

9 3 Operation via the Graphical User Inter face Notes on IP addresses In order to operate the cassette integrated in a network, a hardware IP address must be assigned to each LAN interface. > These settings were done during the system configuration in menu "Networking" (Assembling instruction). IPTV IP adresses ("digital transmission channels") must be assigned to the IPTV streams. > Two IP address ranges are used: "Hardware" IP addresses, which are used to connect the cassettes in the network (e.g x). These IP addresses must be within the "private" range from , resp "IPTV" IP addresses, which are used to transmit the IPTV transport streams (e.g x). These IP addresses must be within the "multicast" range from Notes on port set ting For an IPTV connection also a port setting is necessary. > At IPTV streaming "transmitter" and "receiver" must be set to the same port. By default GSS IPTV cassettes as well as Amino-STBs are set to port Change this port only if additional "external" components are used which can not be set to port Operating Instructions PSMS 1000

10 Tips to keep the overview! The whole video signal distribution takes place via IPTV transport streams. For a clear identification an IPTV IP address ("digital transmission channel") must be assigned to each transport stream! > Note down all assigned IP addresses, in order to keep the overview! In annex A of the Assembling instruction therefore you find a table which you can print out. Two groups of IPT V tr ansport strea ms You will have two groups of IPTV transport streams at the server: Incoming IPTV transport streams, which are streamed by the source devices (e.g. PHIS 1000 S). Outgoing IPTV transport streams, which are streamed by the server. > For a better overview we recommend to use different IPTV IP address ranges (within the multicast range) for both groups. > Within this instruction e.g. we use IP addresses for incoming IPTV transport streams starting with "227". For outgoing streams we use IP addresses starting with "239" (see page 8). Which group appears in which menu? Incoming IPTV transport streams are processed in Menus: Multimedia > Record in order to record channels streamed by the source devices. IPTV CMS > Channels in order to assign the channel setup to the connected Amino-STBs. Outgoing IPTV transport streams are processed in Menus: Multimedia > Playout in order to stream e.g. records and advertising / information trailers. IPTV CMS > Channels in order to assign the channel setup of records/trailers to the connected Amino-STBs Operating Instructions PSMS 1000

11 FTP Access Via commercially available FTP applications (also freeware) you can get access to the content of the hard disk drives and e.g. copy data (information videos) on it. Enter the following access data: Kind of connection: FTP Port: 21 Server: [IP address of the PSMS 1000] User: gss Password: gss In the folders "video1" and "video2" the content of the hard disk drives are shown. The structure of the folders must be remain! Infor m ation videos, Tr ailers File for m at Video files must be stored in "Single Program Transport Stream" Format *.ts. > Umlauts and special characters must not be used in the file name. File location Copy file you would like to stream directly to folders video1 or video2 via the FTP access. > Do not use subdirectories! Fix Per missions If problems occur when accessing the hard disk drives with an FTP programme, permissions can be fixed using the corresponding button Operating Instructions PSMS 1000

12 3.1 Gr aphical User Interface The control of the cassette is to be done via a Graphical User Interface (Web- Interface, GUI), which is called up via a PC using a browser. Therefore you have to enter the hardware IP address, which was assigned to the server during installation, into the address line of the browser (e.g Adjust your PC to a static IP address in the address range of the PQDQ 1000 (e.g , Subnetmask ). Connect your PC to the corresponding LAN socket (e.g. LAN 1) via a LAN cable. Call up the web interface of the PQDQ 1000 via a browser ( > The login screen of the GUI appears. Enter "User name" (gss) and password (gss) and click to button. > The start screen "Status" in section system configuration appears Operating Instructions PSMS 1000

13 3.2 M enu structure Multimedia System IPTV-CMS > The menus of the sections "System" > "Networking", "Services", "System", "IPTV-CMS" > "Languages", "Content", "Channels", "Channel-Lists" and "Multimedia" > "Channels" are needed for the configuration of the Multimedia Server and are described in the Assembling instruction. Sections The control of the PSMS 1000 is divided in three sections: System (page 14) for time setting, from herein you have access to the sections IPTV-CMS and Multimedia. IPTV-CMS (page 15) for the management of the rooms (Check in) and the connected STBs as well as the activation of the alarm screen. Multimedia (page 21) for record and playback of the multimedia content Operating Instructions PSMS 1000

14 3.3 System section > The menus "Networking" and "Services" in section "System" are needed for the configuration of the Multimedia Server and are described in the Assembling instruction. Time set ting > Time setting is only necessary if there is no connection available to a timeserver. Enter the current values for date and time into the corresponding input fields in menu "System" section "Set Time" and store them with button. > All other functions in section "System" are needed for the configuration and are described in the Assembling instruction Operating Instructions PSMS 1000

15 3.4 IPT V- CMS section > The menus "Languages", "Content", "Channels", and "Channel-Lists" in section "IPTV-CMS" are needed for the configuration of the Multimedia Server and are described in the Assembling instruction. Guest Check In M enu Rooms During the guest check in, the guest name will be entered and the welcome screen and if necessary the legal protection for children and young persons will be activated in menu "Rooms". Activate menu "Rooms". As part of the configuration process (Assembling instruction) in this menu all rooms were set up. > The room number, which was entered in menu "STBs" into field "Room EX", was entered in line "Add Room" into input field "EX". The room name and/or the location was entered in input field "Room Nr.". > Above example: Room 100 is equipped with two STBs (100/1 e.g. living room and 100/2 e.g. bedroom), the guest s name is "Mustermann 1". Rooms 101 and 102 are each equipped with one STB, the guest s names are "Mustermann 2" and "Mustermann 3". The "rooms" Lobby1, Lobby2 and Bar are equipped with STBs, which are located in public areas Operating Instructions PSMS 1000

16 Enter guest s data Enter the guest s name in column "Guest Name" for the corresponding room. > This text will be displayed in the welcome screen. Dependent on the basic text of the welcome screen, under some circumstances a salutation/title must be entered (e.g. Mr. Mustermann, Doctor Mustermann etc.). If necessary activate the legal protection for children and young persons (Check box "Child"). > With activated check box, TV channels marked with "Adult" in menu "Channels" are hidden. Pay TV is deactivated. Activate check box "CheckIn" and store the settings with. > The corresponding STB restarts, the TV is switched on and the welcome screen for the language selection is displayed. Group Check in In area "GROUP CHECK-IN" on the left you can check in a group of guests with the same name for several rooms continuously numbered "EX numbers" (e.g ), or all STBs of one room, if the room is equipped with more than one STB (e.g ). Enter the first of the continuously numbered "EX numbers" into input field "From Ex" and the last one into input field "To Ex". If necessary activate the legal protection for children and young persons (check box "Child"). Activate the check in with button. Check- out At check out of the guests remove the guest name and the legal protection for children and young persons and store this setting with, in order to keep an overview. > Don't activate the check box "Delete"! This will remove the room from the list. How to add a room again, is described in the Assembling instruction Operating Instructions PSMS 1000

17 Show assigned STBs The link "Show STBs" in column "STBs" shows all STBs, which are assigned to the corresponding "EX"in menu "STBs". > The control of this menu is described below. M anaging the connected STBs In menu "STBs" you manage the connected STBs. Register a STB at the Multimedia Server As part of the configuration process (Assembling instruction) in this menu all STBs were registered. "T V Only oper ation" / "Remote oper ation" TV sets, which are located in public areas (lobby, bar, etc.), can be set to "TV only operation" and, in addition, for "remote operation" (centralized control) Operating Instructions PSMS 1000

18 TV only operation: Switching on the TV starts TV playback. No access to the multimedia server menus. > In menu "Settings", a channel list from menu "Channel-Lists" msu be assigned to these "TV only" devices. Additional "Remote operation": The TV can not be controlled locally via a remote control but "centralized" via a PC. > This PC must be connected to the network of LAN1 or LAN2. Activate the corresponding check box "TV-Only" and "Remote". Activate check box "Reboot" and restart the STB with button. Remote control a STB STBs with activated remote operation can be remote controlled (channel selection). > In the example, remote operation is activated for the STBs located in the lobby ("Room EX" 900). Click on the corresponding link "Open Remote" in column "Remote" Operating Instructions PSMS 1000

19 Select the desired channel and store the selection with button. > The channel is played out via the corresponding STB. Restart a STB Via the function "Reboot" you can perform a restart of a STB. > A restart must be performed, if, for example, the assignment of "TV- Only" or "Remote" was changed. Activate check box "Reboot" and start the restart with button. Do not remove a STB accidentally > Don't activate the check box "Delete"! This would remove the STB from the list. How to remove and/or register STBs again, is described in the Assembling instruction. Al ar m screen In case of emergency you have the possibility to insert an alarm screen instead of the current programme, e.g. to invite the guests to leave the building. Gener ate an al ar m screen How to generate an alarm screen, is described during the configuration process (Assembling instruction) Operating Instructions PSMS 1000

20 Activate the al ar m screen Activate menu "Settings". Click on "Alarm" in the navigation area on the left. Select the desired alarm screen in pulldown menu "Alarm". Activate the alarm with button. > The alarm screen is displayed at all TV sets, which are switched on. Deactivate an Al ar m Select "OFF" in pulldown menu "Alarm". Deactivate the alarm with button. Leave the CMS Configur ation Click on button "System Configuration". > Return to the system configuration Operating Instructions PSMS 1000

21 3.5 Multimedia Section > The menu "Channels" in section "Multimedia" is needed for the configuration of the Multimedia Server and is described in the Assembling instruction. Record Herein you can record IPTV streams of all available channels. > The configuration of the TV and Radio channels is described in the Assembling instruction. > Records can be started manually as well as time controlled. The maximum recording time is dependent on the data rate limited by the maximum file size of 26.8GB. Prepare a m anual recording Click on button in line "Add Recording:". Select the channel, which you would like to record. The Multicast IP address and the channel name are copied. If necessary edit the name. In input fields "Duration" and "Harddrive" enter the recording time in minutes and the target hard disk drive. Uncheck >. Close the settings with button Operating Instructions PSMS 1000

22 > The inputs are copied to section "Recordings". > Only a list of possible record sources is prepared! Start a record Click on button. > In column "Status" "Recording" is displayed. > Note that a maximum of 16 HD records are possible simultaneously. Prepare a time controlled recording Click on button in line "Add Recording:". Select the channel, which you would like to record. The Multicast IP address and the channel name are copied. If necessary edit the name. In input fields "Duration" and "Harddrive" enter the recording time in minutes and the target hard disk drive. In input fields enter the start date in format YYYY-MM-DD (year-month-day) and the start time hh (hours) and mm (minutes). Close the settings with button Operating Instructions PSMS 1000

23 > The inputs are copied to section "Sheduled Recordings". > Via button sheduled recordings can be removed. > In column Status "Seduled" indicates a planned, "Recording" a running and "Finished" a terminated recording. Abort a record Click on button. Delete a record source from the source list Delete a record source from the list using the corresponding button. > Only the record source is removed from the list, recorded files are not deleted. Pl ayout Herein, you can playback (stream) the recorded video files resp. the video trailers, which you had copied onto the server via FTP, as an IPTV stream Operating Instructions PSMS 1000

24 Prepare pl aybacks Select the multicast IP address via which the file shall be streamed in the selection field on the left in line "Add:". > Only Multicast IP addresses are shown, which were applied in menu Multimedia > Channels before! Click on button. Select the corresponding hard disk drive (Harddrive 1/2). Select the file, which you would like to stream. If the check box "loop" is activated, the playback will be repeated in an infinite loop. If the check box "autostart" is activated, running playbacks (status "Playing") will be started again after a server restart. Close the settings with button. > Only a list of possible playbacks is prepared! > In order that connected Amino STBs can display video files, which are streamed by the server, the IP addresses of the streams, of course must be allocated to corresponding channel positions in menu IPTV- CMS > Channels. Start pl ayback Start the playback of a single file with the corresponding button Operating Instructions PSMS 1000

25 Stop pl ayback Stop streaming with the corresponding button. Delete a pl ayback source from the source list Delete a playback source from the list with the corresponding button. > Only the playback source is removed from the list, record files are not deleted. Delete recorded video files Via commercially available FTP applications (also freeware) you can get access to the content of the hard disk drives and e.g. delete data (video files) from the hard disk drives. > If you use the record function, you should check the hard disk drives for free disk space regularly. Enter the following access data: Kind of connection: FTP Port: 21 Server: [IP address of the PSMS 1000] User: gss Password: gss The recorded video files (*.ts) are stored in the folders "video1" (hard disk drive 1) and "video2" (hard disk drive 2). Delete only *.ts files. The structure of the folders must be remain! Operating Instructions PSMS 1000

26 4 Controlling the Amino STBs But tons for controlling the A mino STBs 1 STB on/off 2 Subtitle 3 Aspect ratio 4 Sound (language) 1/2 5 Navigation/Selection 6 Back/Main menu 7 Programme ± 8 Volume, Mute 9 Numeric keys All other button are dependent on the TV set for its control. > In appendix A2 you will find a short instruction of the remote control, to print out and display it in the rooms. Welcome screen Select the desired language using the navigation buttons 3 and activate it with button "OK" Operating Instructions PSMS 1000

27 M ain menu Ex factory the menus TV operation, Radio operation, Pay TV, Service and Restaurant are configured for demonstration. Select the desired menu/function with the navigation buttons 3 and activate it with button "OK". Using button "Back" 4 you returns to the previous screen/main menu. TV and R adio oper ation In TV or Radio operation you can change the channel using the numeric keys 6, channel± keys 5, as well as the "OK" key and the navigation keys 3 (up/down). Terminate the TV or Radio operation with "back" key 4. At multi-channel sound select the desired language with the "yellow" key 2. Switch off the device Switch on/to standby using the "on/off" key Operating Instructions PSMS 1000

28 5 Installation For information about installation please read the Assembling instruction, of the cassette you will find at " If you do not have internet access, we will send you a DVD on request Operating Instructions PSMS 1000

29 Anhang A A1 Integr ate/exchange a Hard Disk Drive (SSD/HDD) We recommend the use of solid state drives (SSD) because of the higher robustness and the shorter access time. Stop the server via the graphical user interface (GUI) using button in order to end running processes. Stoppt den Server Stops the server Push the corresponding release button in the direction of the arrow. Insert the SSD/HDD matching the connectors into a slot and close the slot. Start the server by disconnecting it from the power supply for a short time. > How to format the hard disk drives and prepare them for use in the cassette, is described in chapter "Format hard disk drives" of the Assembling instruction Operating Instructions PSMS 1000

30 A2 Short Instruction of the Remote Control TV on/off 2 Subtitle 3 Aspect ratio 4 Sound (language) 1/2 5 Navigation/Selection 6 Back/Main menu 7 Channel selection 8 Volume/Mute 9 Channel selection

31 CE-Konformitätserklärung Operating Instructions PSMS 1000

32 Service: Phone: +49 (0) 911 / Fax: +49 (0) 911 / service@gss.de Grundig SAT Systems GmbH Beuthener Straße 43 D Nürnberg Alterations reserved. Technical data E. & O.E. GSS GmbH v rev.10/