DIGITAL OSCILLOSCOPES & DIGITAL SCOPES

Size: px

Start display at page:

Download "DIGITAL OSCILLOSCOPES & DIGITAL SCOPES"

Scarlett Dawson
5 years ago
Views:

1 7008 Multi-channel Long Memory Digital Oscilloscope VIEW RECORDERS (70088) 6 5mm 7kg (6-3/ 8-3/ 6-3/" 37.5 lbs) Safety Standards; EN600 EMI Standard; EN550 Group Class A Immunity Standard; EN5008-: 995 The digital oscilloscope, with a maximum record length of 6 MW, features more than just a long record length. We designed this instrument to facilitate long record measurement work. This digital oscilloscope can efficiently capture abnormal phenomena buried in long data, allowing you to search for and analyze the causes of these abnormal phenomena. We made the record length per channel as long as possible to enable you to carry out efficient troubleshooting. We also designed the instrument to measure data in at least six channels, enabling you to determine the cause and effect relationship between each signal. The instrument also has excellent zoom operability to permit analysis of captured waveforms. Select the number of channels and record length suitable for your application. After the purchase, if you need more channels or a larger record length, your oscilloscope can be upgraded. SELECTION GUIDE Model Number of input channels Max Sampling rate Per channel 00 MS/s 00 MS/s 00 MS/s 00 MS/s 00 MS/s 00 MS/s 00 MS/s 00 MS/s 00 MS/s 00 MS/s 00 MS/s 00 MS/s Max M words M words M words M words FEATURES Max 8 analog inputs or analog inputs +3 bit digital inputs (optional) You can simultaneously observe signals from a maximum of 8 channels. Each channel is provided with a 00 MS/s A/D converter. Max 6M words By limiting the number of channels used to half the number of channels incorporated in the instrument, you can increase the maximum record length of per channel up to 6 M words. Dual zoom display The instrument supports a dual zoom display function which simultaneously displays the entire captured waveform together with two selected parts of the same waveform. History memory The history memory, which holds up to 8000 screens, can assist you in troubleshooting by letting you recall previous displays. Logic inputs (optional) logic probe offers 8 bit logic inputs in exchange for analog input. The feature provides mixed analog and digital signal observation. In its maximum configuration, the offers ch analog and 3 bit digital signal observation. Built-in 3.5 inch FDD Built-in MO drive (optional) Built-in printer (optional) FUNCTIONS EFFECTIVE UTILIZATION OF THE LONG MEMORY A long memory is useful not only for capturing single shot signals. The long memory of the can meet a variety of measurement needs. High Time Resolution Measurement Using the Long Memory When you need to capture fast noise and surge signals using a slow time/div range, a long record length is necessary. For instance, at 0 µs/div several tens of Kwords may be required. The MW record length of the supports a sampling rate of Record length Per channel M words M words M words M words Frequency band Number of channels that can be used at the max sampling rate or max record length 3 3 3

even when you are monitoring waveforms of several milliseconds.

Capturing Signals Using a Divided Long Memory History Memory Holds up to 8000 Past Images Troubleshooting of a designed circuit starts from capturing of an abnormal signal.

You may be lucky enough to display the abnormal phenomenon on the screen by monitoring the signal for some time using simple trigger conditions.

The history memory holds up to 8000 previous displays without any need for special settings. An abnormal phenomenon that appeared for only an instant can be recalled later.

2 even when you are monitoring waveforms of several milliseconds. When you are observing transient phenomena or electronically controlled machine signals, the signals captured by the long memory are displayed on the screen in the correct orientation. Capturing Signals Using a Divided Long Memory History Memory Holds up to 8000 Past Images Troubleshooting of a designed circuit starts from capturing of an abnormal signal. Often, when you wish to capture an abnormal phenomenon, you do not know the correct trigger conditions for capturing the signal. You may be lucky enough to display the abnormal phenomenon on the screen by monitoring the signal for some time using simple trigger conditions. However, when you use a normal digital oscilloscope, an abnormal signal that appears momentarily is updated by the next signal. The history memory holds up to 8000 previous displays without any need for special settings. An abnormal phenomenon that appeared for only an instant can be recalled later. Example of a superimposed display of captured past screens Sequential Store Function with A Dead Time of 0 µs Normally, when a waveform is displayed on a digital oscilloscope in realtime, a dead time of several ms occurs. Consequently, you cannot use a normal digital oscilloscope for applications requiring acquisition of all the signals generated at intervals of ms or less. The sequential store function of the eliminates the process of displaying the acquired signals, thus enabling the signals to be captured with only a short dead time. Like the history memory function, the sequential store function enables signals that satisfy the trigger conditions for up to 8000 measurements to be acquired by the built-in memory. Difference between The History Memory Function and The Sequential Store Function Both the history memory function and the sequential store function use the memory divided into several blocks rather than as a single unit. The history memory function uses the divided memory blocks as a ring memory, and the contents of the oldest memory block are updated until the stop key is pressed. The sequential store function does not update the contents of the memory after acquiring the specified number of waveforms. As indicated in the figure below, when the sequential store function is used, signals are not displayed each time they are acquired into memory. History memory function: Effective for capturing abnormal signals whose nature is not known. Sequential store function: Effective for capturing signals generated at a rate of no more than several ms, without omission. Wave form display with sequential store-function Time Memory block of number of designations SIMPLE, VERSATILE ZOOM A zoom function that magnifies part of the captured signal is an important feature of a digital oscilloscope that has a long memory. The enables you to make various kinds of zoom displays by means of simple operations. Zoom that Can Simultaneously Display Traces with Intuitive Operations The zoom operation of the is the same as the popular zoom operation used in the DL50/D50L and DL000 series. The ASIC developed by YOKOGAWA processes the long memory at high speed, enabling you to display the desired area instantaneously. Various Zoom Displays The overall screen of a signal captured by the is defined as Main, and an enlarged screen of part of the waveform is defined as Zoom. You can set two enlarged areas Zoom (Z) and Zoom (Z) with respect to a captured waveform. You can combine the Main screen, the Z screen and the Z screen into a single screen. In the Main&Z&Z setting mode which simultaneously displays the Main screen and the two enlarged screens, Z and Z, a maximum of analog signals can be displayed simultaneously. Main display Main & Z & Z display By Using The Zoom Allocation Function, You Can Display An Enlarged Form of One or More of A Number of Waveforms on A Screen. When performing multi-channel measurements, if it is not necessary to enlarge all of the waveforms. You can use the zoom allocation function to display only certain selected waveforms in the Zoom screen in enlarged form. Wave form display with history memory function Time Memory (n) Memory (n+) When the zoom allocation function is not used When the zoom allocation function is used

VIEW RECORDERS YOU CAN SELECT A SIGNAL CAPTURING METHOD AND A DISPLAY METHOD THAT IS SUITABLE FOR THE PARTICULAR MEASUREMENT YOU WISH TO PERFORM.

However, by using the envelope mode of the, you can always store the peak value of the signal at a sampling rate of 00 MS/s, regardless of the Time/div setting. also be set using voltage values.

You can process these results using spreadsheet calculation software.

By using the box average function, you can capture signals at an equivalent resolution of up to bits depending upon the Time/ div setting.

When box average is ON (After the signal is captured, zoom takes place in the voltage axis direction) When box average is OFF (After the signal is captured, zoom takes place in the voltage axis

This mode can also be used in combination with the envelope to capture surge signals of several tens of MHz, or in combination with the box average function to capture signals at high resolution.

3 VIEW RECORDERS YOU CAN SELECT A SIGNAL CAPTURING METHOD AND A DISPLAY METHOD THAT IS SUITABLE FOR THE PARTICULAR MEASUREMENT YOU WISH TO PERFORM. Envelope If you perform signal observation for at least several seconds, you cannot capture signals at the maximum sampling rate, even if you use a long memory of 6M words. However, by using the envelope mode of the, you can always store the peak value of the signal at a sampling rate of 00 MS/s, regardless of the Time/div setting. also be set using voltage values. You can use the measure save function. (which arranges the results of the past 5 measurements up to the point where signal acquisition stopped) to output these results in ASCII format. You can process these results using spreadsheet calculation software. Example of automatic measurement of waveform parameter When envelope is ON When envelope is OFF Box Average The resolution of the A/D converter of the is 8 bits. By using the box average function, you can capture signals at an equivalent resolution of up to bits depending upon the Time/ div setting. The box average function is also effective for capturing single shot signals. When box average is ON (After the signal is captured, zoom takes place in the voltage axis direction) When box average is OFF (After the signal is captured, zoom takes place in the voltage axis direction) Roll Mode Display The roll mode displays a low speed signal on the screen in such a way that it rolls, thus enabling it to be recorded on a pen recorder. This mode can also be used in combination with the envelope to capture surge signals of several tens of MHz, or in combination with the box average function to capture signals at high resolution. Histogram Analysis Wave statistical processing This function specifies the voltage and the time range. After a signal has been acquired a number of times, the frequency of occurrence of time values and voltage values are displayed. This is effective for analyzing jitter, for example. Statistical processing of the waveform parameter results The measurement results for the set number of acquisitions of the specified items of the waveform parameters are displayed in the form of a histogram. Voltage histogram display By displaying a histogram of voltage for each acquisition, you can analyze the waveform from a different angle. Waveform Calculation Software [User Define is An Option] The supports basic functions which performs addition, subtraction, multiplication and division phase performs a phase shift followed by before mentioned computations. Binary converts an analog signal into a bit patterns of ones and zeros, based on a defined threshold. User define math function (optional) enables you to combine various funtions to perform waveform calculation. Waveform display when the roll mode is used Example of roll mode display HIGH-SPEED PRIMARY PROCESSING OF CAPTURED SIGNALS The i960 Intel RISC processor installed in the automatically measures the waveform parameters, and also performs waveform calculations and other data processing, at high speed. Automatic Measurement of Waveform Parameters You can select various items such as amplitude, rise, and interchannel delay, from a total of items, for each channel. The reference values of the parameters related to the time axis can Example of a user define of the

The user define math function offers functions such as square root, exponential, common logarithms, differentiation, and integration, pulse-width, Hilbert transform, and FFT.

By combining these functions, you can perform calculations such as demodulation of FM modulated waveforms. Linear Scaling Function Converts Voltages into Physical Values.

The linear scaling function of the assigns coefficients and offset values to enable the input voltage to be converted into a physical value.

YOU CAN OUTPUT A CAPTURED WAVEFORM IN VARIOUS FORMS DEPENDING ON THE PARTICULAR APPLICATION.

The short copy format in which the screen data is printed and the long copy format in which signal data in the acquisition memory is printed out in an expanded form.

4 The user define math function offers functions such as square root, exponential, common logarithms, differentiation, and integration, pulse-width, Hilbert transform, and FFT. These calculations are all performed in the Math and Math areas and you can also use calculation results from Math in Math functions. By combining these functions, you can perform calculations such as demodulation of FM modulated waveforms. Linear Scaling Function Converts Voltages into Physical Values. When recording an output from a sensor, for example, it is desirable to convert it directly into a physical value such as rpm or m/s rather than leaving it as a voltage. The linear scaling function of the assigns coefficients and offset values to enable the input voltage to be converted into a physical value. In addition, a unit can be attached to a converted result, enabling it to be displayed directly as a physical value. YOU CAN OUTPUT A CAPTURED WAVEFORM IN VARIOUS FORMS DEPENDING ON THE PARTICULAR APPLICATION. Outputting A Signal to The Built-in Printer (option) There are two ways you can output a signal to the built-in printer. The short copy format in which the screen data is printed and the long copy format in which signal data in the acquisition memory is printed out in an expanded form. Example of short copy Example of long copy TRIGGERS THAT ARE SUPPORTED BY THE Trigger functions for ease of operation Select one of two trigger settings, SIMPLE which is related to edge trigger settings, and ENHANCED which is related to other settings, according to your particular application. SIMPLE Settings related to the edge trigger Edge trigger Gate trigger A trigger is generated when the selected waveform crosses a set level. A vertial gate is placed ahead of the trigger point. A trigger occurs when the trigger conditions are met after the signal meets the gate condition(pass or bypass) A B (n) A Delay B Edge On A The trigger condition is satisfied when the B trigger occurs n times after the A trigger condition is met. The trigger condition is satisfied when the B trigger conditions are met after the A trigger occures and the set delay time has elapsed. The trigger occurs at the point in time at which the edge of a selected input channel is detected while the A pattern trigger condition exists. OR The trigger occurs when any one of the individual channnel edge triggers occur. ENHANCED Settings not related to the edge trigger B > Time B < Time A trigger is generated on the falling or rising edge of a pulse when the pulse width exceeds the preset time. The setable range is 90ns to 5s. A trigger is generated on the falling or rising edge of a pulse when the pulse width is less than the preset time. The minimum glitch detection is 5ns. B Time Out A trigger occurs when the B trigger condition remains true for the set period of time. TV Window Logic A trigger is generated by a video signal such as NTSC, PAL, HDTV, etc. A trigger occurs when the signal crosses the upper or lower defined levels. A trigger is defined by combination of the logic inputs.

VIEW RECORDERS Output to A Personal Computer Data can be transferred on-line via GP-IB, and also transferred off-line by using an FD or MO disk (a built-in MO drive is available as an option).

This enables you to efficiently create reports and papers using a word processor. You can save hard copy images not only in black and white but also in color or a gray scale.

5 VIEW RECORDERS Output to A Personal Computer Data can be transferred on-line via GP-IB, and also transferred off-line by using an FD or MO disk (a built-in MO drive is available as an option). Saving a hard copy image (image file) You can insert hard copy images saved in the in an image format, such as TIFF or BMP, directly into text made with a word processor. This enables you to efficiently create reports and papers using a word processor. You can save hard copy images not only in black and white but also in color or a gray scale. SPECIFICATIONS Vertical section Number of input channels:,, 6, 8 (Differs depending upon the model) Vertical resolution: 8 bits (in normal mode) Max bit (after average or box average processing) Max sampling rate: Normal (interleave mode) 00 MS/s (all channels simultaneously) Equivalent time 50 GS/s Frequency band (-3 db): DC to Voltage axis sensitivity: mv/div * to 5 V/div DC accuracy * : ±(.5% of 8 div + offset voltage accuracy) *5 Offset voltage accuracy: to 50 mv/div ±(% of set value + 0. mv) 00 to 500 mv/div ±(% of set value + mv) to 5 V/div ±(% of set value +0 mv) Inter-channel isolation: -0 db (typical. for the same range) Max input voltage: 50 V(DC + AC peak) ( khz max) (CAT I&II, 77Vrms) Input impedance: MΩ ±.5% (approx. 6 pf) Input coupling: AC/DC/GND Example of inserting a hard copy image on the screen of the into application software of a personal computer Saving acquired data You can save a captured waveform to an FD or an MO disk using a binary or ASCII format. If you save the waveform in a binary format, you can load it once again, or display it on a personal computer using viewer software that we provide. Measure save function (saves the results of automatically measuring a waveform parameter.) You can save the results of up to 5 parameter measurements to an FD or an MO disk using the ASCII format. You can read and analyze the results of spreadsheet calculations. LOGIC PROBE & LOGIC PROBE INPUT UNIT (optional) Eight-bit logic inputs become observable instead of one analog signal input. The probe and unit enables multi-channels to be simultaneously observed when measuring hybrid signals of mixed analog and digital data. These further support triggers using logic inputs. Horizontal section Sweep time: ns/div to 50 s/div Time axis accuracy: ±(0.0% ps) * Max record length: (500 kw/ch model) M words ( MW/ch model) (8 MW/ch model) External clock input: EXT CLOCK IN input 0 Hz to 00 MHz *3 Trigger Mode: AUTO/NORMAL (SINGLE acquisition by the single start key) Source: Input channel/ext Slope: Rise/fall/both Coupling: AC/DC Sensitivity: div p-p (DC to ) *6 Type: Edge/gate/A B (n) / A Delay B/ Edge On A / OR / B > Time B < Time / B Time Out/Window (CH only) TV (CH only) NTSC/PAL/HDTV A and B are defined by parallel pattern combination External trigger input: Range: ± V Trigger level: ± V/setting resolution 5 mv Frequency band: DC to 00 MHz Screen update speed When channel is used: Max 80 displays per screen When 8 channels are used: Max 7 displays per screen Storage media 3.5 inch FDD: 60 KB/70 KB/. MB/. MB(MS-DOS) 3.5 inch MO (option): 8 MB/30 MB read and write Display LCD: Number of display traces: 8.-inch TFT, color (60 80 dots) Max. 8 3 analog traces (in Zoom mode) Max. 3 analog digital traces (with /F3 option and logic probes, in Zoom mode) Logic probe Waveform calculations Types of calculations: Standard: +,,, phase, binary, power spectrum With user define math function (/M option): Math description: A formula can be defined in Math, Math area. Traces described in Math: C to C8 (From channel to channel 8) Traces described in Math: C to C8 (From channel to channel 8), Math Number of characters used in Math, Math : 50 characters * : Reference temperature condition (3± C, 55±0% RH) After calibration following warmup for 30 minutes * : Reference temperature condition (3± C, 55±0% RH) After warmup for 30 minutes * 3 : Continuous clock signal only * : mv/div can be realized at 5 mv/div zoom. * 5 : At a range other than mv/div. The voltage axis at the mv/div range is as follows: ±(3% of 8 div + offset voltage accuracy) * 6 : div p-p at mv/div (DC to )

6 Supported computation Calculus: DIF(), DDIF(), INTG(), IINTG() Pulse width computation: PWHH(), PWHL(), PWLH(), PWLL(), PWXX() FFT related: Linear spectrum, RMS spectrum Power spectrum, etc. Others: ABS(absolute value), SQR(squre root), LOG EXP, ATAN, MEAN(mean value) ^, ^3, ph (phase function), BIN (binary function) HLBT (Hilbert transform), Digital filter Record length used for calculations: 50 k words With /M option, the record length can be increased to M words (up to 0 K words in the case of the FFT) Standard Accessories Name Power cable Probe (700998) Instruction manual 3.5-inch floppy disk Quantity Number of channels Expansion function GO/NO-GO evaluation: Parameter evaluation: Evaluation can be made using a combination of 8 parameters. Waveform parameter automatic measurement: Up to items per trace. Parameters for 8 traces can be measured simultaneously. Max 8 items + statistical measurement results can be displayed. Image format saving: Snapshot: Accumulation: Roll mode: HP-GL, PostScript, TIFF, and BMP formats By pressing the snapshot key, waveforms can be accumulated on the screen without limit From screens to 8 screens, INFINITE (limitless time) Color accumulation From 00 ms/div; From 00 ms/div ( MW use) From 500 ms/div (8 MW use) ; From s /div (6 MW use) Sequential store function: Min. dead time 0 µs Envelope function: Peak value can be captured at 00 MS/s regardless of Time/div History memory function: Holds up to 8000 screens Interface GP-IB Electrical and mechanical specifications: IEEE std Protocol: IEEE std SCSI supported SCSI devices HDD: Drive formattable by EZ-SCSI MO drive: Up to 60 MB type. formattable by EZ-SCSI Zip drive: Lomega Zip drive compatible Logic probe input unit (/F3 option) specifications Number of logic input / connector 8 Number of usable connectors: Up to half of the analog input can be assigned for logic inputs. Input type: Ground common Display area: 8 bit digital signal is displayed in the corresponding analog signal display area Logic probe (700985) specifications Number of inputs: 8 Maximum input voltage: ± 0 V (DC + AC peak) Threshold level: Variable Frequency bandwidth: DC to 80 MHz Input impedance: MΩ ±.5%, 6 pf Signal input/output TRIG OUT: RGB output: Calibration output: TTL level VGA compatible, D-Sub 5 pin khz, V p-p, square wave Built-in printer (option) Printing method: Thermal write dot method ( mm width) Dot density: 6 dots/mm General specifications Operation temperature range: 5 to 0 C Operation humidity range: 0 to 85% RH (when printer is not used) 35 to 85% RH (when printer is used) Power source voltage: 90 to 3 V AC, 98 to 6 V AC (Automatically switched) Power source frequency: 8 to 63 Hz Power consumption: 650 VA max External dimensions: 6(W) (H) 5(D) mm (Excluding projection) Weight: Approx. 7 kg (main unit only) AVAILABLE MODELS Model Power voltage Power cable Option Suffix Codes D -F -Q -R /B5 /M /C3 /M /F3 Description ch, 500 kw/ch model ch, 500 kw/ch model 6 ch, 500 kw/ch model 8 ch, 500 kw/ch model ch, MW/ch model ch, MW/ch model 6 ch, MW/ch model 8 ch, MW/ch model ch, 8 MW/ch model ch, 8 MW/ch model 6 ch, 8 MW/ch model 8 ch, 8 MW/ch model 00 to 0 V 0 to 0 V UL, CSA standard VDE standard BS standard SAA standard Built-in printer * MW computation extension Internal MO drive * User define math function Logic probe input unit * 3 * roll chart (B9850NX) is included. * MO disk is included * 3 Logic probe (700985) is optional accessory. Please order the probe separately. (Number of usable logic probe varies depending on the model.) Accessories (optional) Name Ligic probe 50Ω terminator Code Spares Name Model/part No. Printer paper roll B9850NX passive probe Related Products Name Model/part name Isolation input unit DIMENSIONS (0.7) Specifications For logic input unit (/F3 option) Through type Order Q ty Specifications Order Q ty 30 m ( roll per instrument) 5 0 MΩ (0:),.5 m ( per instrument) Specifications channels, 30 MHz, with probes 6 (6.77) (6.58) (0.7) Order Q ty Unit: mm (approx. inch) 8 (.0) 0 (0.79) (8.7)

DIGITAL OSCILLOSCOPES & DIGITAL SCOPES

DIGITAL OSCILLOSCOPES & DIGITAL SCOPES 7050/7050/70505/7055 Digital Oscilloscopes DL540/DL540L/DL50/DL50L FUNCTIONS SIGL OBSERVATION USING LONG MEMORY Capturing Signals Using Long Memory for Accurate Waveforms The DL50/DL540 can continuously