CONTROL CONTROL. Kaleido-XQUAD Simplified Standalone Quad-Split Multiviewer with Dual Quad-Split Upgrade Capability

Transcription

1 Single or Dual Outputs Per Multiviewer KALEIDO-XQUAD: 4x1 Multiviewer The multiviewer is available in two versions: Kaleido-XQUAD features four 3G/HD inputs and a single multiviewer output (HDMI/HD-SDI), and Kaleido- XQUAD-DUAL offers eight 3G/HD inputs and two multiviewer outputs. CONTROL RCP-00 advanced multiviewer / router control panel Labels updated from router database, switcher or static Audio monitoring outputs through HDMI or HD-SDI Time of day sync to NTP Audio and video format Aspect ratio markers Kaleido-RCP remote panel NVISION router control panel RS-4 Ethernet XEDIT layout editor software 4 auto-sensing inputs (3G/HD/SD-SDI) KALEIDO-XQUAD-DUAL: 8x Multiviewer Doubling space efficiency with its 8x configuration, Kaleido-XQUAD-DUAL provides full flexibility with layout creation. In the event of a monitor problem, it offers easy failover of all eight sources on a single display. CONTROL High quality monitoring Video extracted Timecode Less than 1/ frame delay Timers with mouse or GPI control RCP-00 advanced multiviewer / router control panel Kaleido-RCP remote panel RS-4 NVISION router control panel Ethernet Audio meters Tallies Safe area markers XEDIT layout editor software 8 auto-sensing inputs (3G/HD/SD-SDI) 1

2 Kaleido-XQUAD Simplified Standalone Quad-Split Multiviewer with Dual Quad-Split Upgrade Capability Simplified, Highly Flexible Truck Monitoring With its excellent space and energy efficiency, Kaleido-XQUAD is especially well suited to production monitoring in trucks. It also offers the picture quality and display flexibility demanded by the most critical operators. Its lightning fast processing removes the need for complex audio delay compensation, while satisfying the most discerning of directors. The multiviewer system integrates tightly with the NVISION 8500 Hybrid routers with integrated audio processing, and third-party production switchers. Control of a highly integrated system is simplified with the RCP-00 panel, which can operate the router and multiviewer, as well as Grass Valley s signal processing and distribution cards. RCP-00 panel controls Multiviewers Grass Valley or third-party switcher Routing Tally updates Signal processing Source and destination labels Distribution Multiviewer outputs 3G/HD/SD FEEDS NVISION 8500 Hybrid router Kaleido-XQUAD quad multiviewer

3 Remote Control of Integrated Routing and Multiviewer Systems Integrated multiviewer and routing systems can be controlled using a choice of remote control panels. One simple option is to use a traditional router control panel to assign any source, anywhere, any number of times on the monitor wall. This mimics what the router would do to a traditional monitor wall, by allowing the user to assign any source to any destination. This type of control is available with the NVISION control panels, as well as third-party router control panels from Snell (Pro-bel) and Nevion. Router panel x Router controller SOURCES... The highly graphical RCP-00 touchscreen remote panel offers more advanced control of combined multiviewer and routing systems. The panel provides multiviewer layout pre-set selection and quick router source assignment control via a category/index graphical interface. The RCP- 00 is a multifunctional panel, and can also be used for control of Densité Series interfaces. Intuitive control across multiviewers Kaleido multiviewer systems can be easily controlled by one or more dedicated remote control panels, or by on-screen mouse control. Simple to use, on-screen mouse operated drop-down menus are contextual to speed operations, and offer numerous functions, such as changing aspect ratios, checking the safe area, assigning an input and changing text in a UMD. 10 layout presets Aspect ratio selection Audio monitoring output selection Full screen selection Safe area markers Users can also instantly change layout configurations, and dynamically zoom one source larger for quality control, or audio monitoring of an on-screen source. The Kaleido-RCP remote panel exemplifies this simplicity, and provides easy multiroom, multioperator control over Ethernet, with local connections for a mouse and keyboard. The Kaleido-RCP remote control panel features direct key control for the most common commands 3

4 Kaleido-XQUAD Simplified Standalone Quad-Split Multiviewer with Dual Quad-Split Upgrade Capability Rich Integration with Routers Delivers Full Scalability For large monitoring facilities, Kaleido-XQUAD can be paired with NVISION and third-party routers to provide expansion up to 1,15 video inputs and 88 multiviewer outputs. With the Kaleido Cluster feature, multiple multiviewers behave like a single virtual system from an operator s perspective, with full layout flexibility. Room 1: Audio For example, two NVISION 8576 routers can be integrated with 144 Kaleido-XQUAD-DUAL multiviewers to provide up to 88 multiviewer outputs. This system spans three independent control rooms, controlled by three operators. Room : Production control Room 3: Replay VTR 01 VTR 0 VTR 05 VTR 06 SAT 01 SAT 0 SAT 05 SAT multiviewer outputs multiviewer outputs multiviewer outputs Frame 1 Up to 144 Kaleido-QUAD multiviewers can be integrated together Frame multiviewer outputs Frame video inputs video inputs video inputs 115 3G/HD/SD-SDI video inputs from routers Two NVISION 8576 routers (up to 115 video inputs to routers) 4

5 Full Integration with Other Kaleido Multiviewers Kaleido-XQUAD uses the same advanced processing technology, control panels and layout software as the top of the range Kaleido-X processor. On-screen elements, such as tallies, timers and clocks are just some of the heritage from the Kaleido family, and there is also a library of third-party interfaces with routers, UMD controllers and production switchers. The powerful XEdit configuration tool allows seamless creation of layouts for multiple Kaleido devices within a single room. This provides a much better overview of the entire monitor wall during layout design. The Kaleido-RCP and RCP-00 remote control devices allow instant layout changes from a single button press, and the intuitive Mouse on Wall feature delivers easy interactivity with the monitor wall across multiple multiviewer processors. All these diverse capabilities improve workflows and streamline operations in facilities, especially when there are multiple Kaleido family processors XEDIT layout editor Kaleido-RCP Remote control panel 10 layout presets Aspect ratio selection Audio monitoring output selection Full screen selection Safe area markers The Kaleido-RCP remote control panel features direct key control for the most common commands RCP-00 Universal remote control panels Mouse on wall feature 5

6 SPECIFICATIONS Video Input (Kaleido-XQUAD = 4, Kaleido-XQUAD-DUAL = 8) SD-SDI Signal: SMPTE ST 59-C (70 Mb/s), SMPTE ST Formats: 480i59.94 and 576i50 Return loss: >15 db up to 70 MHz Jitter: <0. UI Cable length: 50m (80 ft.) Belden 1694A Connector: BNC HD-SDI Signal: SMPTE ST 9-C (1.485, 1.485/1.001 Gb/s), SMPTE ST Formats: 70p59.94, 1080p3.98, 1080p3.98SF, 1080p4, 1080p4SF, 1080p5SF, 1080p9.97, 1080i50, 1080i59.94 Return loss: >15 db up to 1.5 GHz Jitter: <0. UI Cable length: 100m (38 ft.) Belden 1694A 3G-SDI Signal: SMPTE ST (.97,.97/1.001 Gb/s) Level A Formats: 190x1080p60, 190x1080p59.94, 190x1080p50 Cable length: 85m (78 ft.) Belden 1694A Graphic converted to HD-SDI from KXI-DVI-Bridge Signal: SMPTE ST 9-C (1.485, 1.485/1.001 Gb/s) Resolutions: Mode A: 104x768, 1366x768, 180x104, 1680x1050, 1600x100 at 60Hz Mode B: 180x70 and 190x1080 at 50/60 Hz Cable length: 100m (38 ft.) Belden 1694A Mosaic (Video And Graphic) Outputs (Kaleido-XQUAD = 1, Kaleido-XQUAD-DUAL = ) HDMI Signal: HDMI V1.3 Format: 180x104 up to 190x100p configurable Refresh rate supported (50 Hz and Hz) Cable length: 4.57m (15 ft.) Connector: HDMI Signal path: 8 bits output HD-SDI Signal: 3G/HD SDI SMPTE ST 44 and SMPTE ST 9M compliant Supports data rates of , 1485, 967, 970 Mb/s Return loss: >15 db up to 1.5 GHz >10 db from 1.5 GHz to 3 GHz Jitter (wideband): HD: <0. UI 3G: <0.3 UI GPI Inputs (8) Contact closure: GND Protection: up to 4V Connector: Terminal block interface PCB via DB-6 GPI Outputs () Maximum voltage: 4V Maximum current at 1V: 0 ma (through 00Ω series resistor) Pulse minimum duration: 10 μs Connector: Terminal block interface PCB via DB-6 Communication Ethernet (1) Signal: 10/100 BASE-T Connector: RJ45 Serial Port (1) Signal: RS-4 (SMPTE ST 07, EBU-345) Connector: Terminal block interface PCB via DB-6 Video Processing Performance Signal path: 8-bit YCbCr to 4-bit RGB Processing delay: ~1 field in genlock mode, 1- fields in non-genlock mode Audio Processing Performance Quantization: 0-4 bits Sampling: 48 khz THD+N: 80 db SNR: 98 db Mechanical Dimensions: 43 mm (1.7 in.) x 14 mm (8.4 in.) x 305 mm (1 in.) Weight:.5 kg (5.5 lbs.) Electrical AC input range to power supply: Hz V Kaleido-XQUAD: 9W max ORDERING Product selection The multiviewers include 3 Gb/s input and embedded audio support, and HDMI + HD-SDI output(s) Kaleido-XQUAD 4 input single output multiviewer Kaleido-XQUAD-DUAL 8 input dual output multiviewer Options KMV-39NN-4x1-OPT-3DLA Stereoscopic display license (line alternate mode) for KMV x1 KMV-39NN-8x-OPT-3DLA Stereoscopic display license (line alternate mode) for KMV x KMV-39N1-NX1-OPT-OP Output two enabled license KMV x1-OPT-4IN KMV x1 additional inputs 5-8 license KXI-DVI-BRIDGE Dual channel DVI to HD bridge DXF-00-C Optical extension system w/hdmi+l- HDMI cable DXF-00-PSU DXF-00 power supply (1x sub-module) KALEIDO-RCP Ethernet remote control panel and KM gateway KRCP-RK Kaleido-RCP rack mount bracket RCP-00 Advanced remote control panel for models and accessories NSH6M Terminal block adapter for HD-6 connections (for audio I/O connections) KXC-HDMI-DVI HDMI to DVI fem cable (0.3m/1 ft.) DENSITÉ 3 MINI-PSU Redundant external PSU for Densité 3 mini DENSITÉ 3 MINI-TRAY 1 RU tray for Densité 3 mini ( Kaleido-XQUAD) DENSITÉ 3 MINI-PA 4V to 1V power adapter Grass Valley & Third-party Interface Options KMV-39N1-8XN-OPT-RT-NVISION Control and UMD support for NVISION routers KMV-39N1-8XN-OPT-RT-DATATEK Control and UMD support for Datatek routers KMV-39N1-8XN-OPT-RT-ENCORE Control and UMD support for Encore controllers KMV-39N1-8XN-OPT-RT-EVERTZ Control and UMD support for Evertz routers KMV-39N1-8XN-OPT-RT-GVG7000 Control and UMD support for GVG7000 routers KMV-39N1-8XN-OPT-RT-JUPITER Control and UMD support for Jupiter routers KMV-39N1-8XN-OPT-RT-HARRIS Control and UMD support for Harris routers KMV-39N1-8XN-OPT-RT-NETWORK Control and UMD support for Nevion routers KMV-39N1-8XN-OPT-RT-SNELL Control and UMD support for Snell routers KMV-39N1-8XN-OPT-RT-PESA Control and UMD support for PESA routers KMV-39N1-8XN-OPT-RT-UTAH Control and UMD support for Utah routers KMV-39N1-8XN-OPT-TLY-SONY Tally interface for Sony switchers (serial protocol) KMV-39N1-8XN-OPT-TLY-KAHUNA Tally interface for Snell and Wilcox Kahuna switchers KMV-39N1-8XN-OPT-TLY-SYNERGY Tally interface for Ross Synergy and Vision switchers KMV-39N1-8XN-OPT-TLY-KALYPSO Tally interface for GV Kalypso switchers KMV-39N1-8XN-OPT-TLY-KAYAK Tally interface for GV Kayak switchers GVB-1-034B-EN-PH Join the Conversation at GrassValleyLive on Facebook, Twitter, YouTube and Grass Valley - A Belden Brand on LinkedIn. Belden, Belden Sending All The Right Signals and the Belden logo are trademarks or registered trademarks of Belden Inc. or its affiliated companies in the United States and other jurisdictions. Grass Valley, Densité, Encore, Jupiter, Kaleido, Kalypso, Kayak, NVISION and icontrol are trademarks or registered trademarks of Grass Valley. Belden Inc., Grass Valley and other parties may also have trademark rights in other terms used herein. Copyright 014, 016 Grass Valley Canada. All rights reserved. Specifications subject to change without notice. 6