Powermax family brochure. Portable air plasma cutting and gouging systems

Transcription

1 Powermax family brochure Portable air plasma cutting and gouging systems

2

3 Contents 5 Understanding plasma technology 5 Why choose Powermax over oxyfuel? 7 Why choose Powermax over other cutting and gouging systems? 7 Choose the right system 8 Powermax uses 9 Powermax30 XP 10 Powermax30 AIR 11 Powermax45 12 Powermax65 13 Powermax85 14 Powermax Powermax System specifications comparison 19 Automated cutting and gouging with Powermax 20 Genuine Hypertherm consumables 21 Duramax retrofit torches 22 Cutting guides, Personal protective equipment 24 System accessories 27 Nearly 50 years of cutting excellence 3

4

5 Understanding plasma technology Powermax systems cut metal quickly, and cleanly Plasma, and its intense heat (up to 39,000 F or 22,000 C), is created when gas is ionized by electrical energy. Powermax systems use plasma to melt metal, and compressed air or nitrogen to blow the molten metal away, leaving a good quality cut edge ready to weld in most cases. Powermax systems are also effective for gouging metal. Cut or gouge any electrically conductive metal Whether in a shop, factory, at home or in the field, Powermax systems cut and gouge all metal types and forms. Most models are available with a handheld or machine torch to fit the application. Operating a plasma system requires: AC power source (fixed or generator) Why choose Powermax over oxyfuel Safer Cutting with a plasma system needs no flammable gasses. More productive Much faster cut speeds up to 1-1/2" thick; no preheating needed; a cleaner edge with smaller heat affected zone (HAZ) requires less grinding of the cut edge. More versatile Cuts and gouges all electrically conductive metal including stainless steel and aluminum; easily used with templates, cuts stacked, painted, or rusted metal. Cut speed comparison on 1/2" mild steel Compressed air shop air, portable air compressor or bottled air. Nitrogen is often used for stainless steel Safety equipment, including shaded glasses or face shield, gloves, protective clothing and proper ventilation Cut speed Powermax125 Powermax105 Powermax85 Powermax65 Powermax45 Oxyfuel For more information, refer to product brochures or visit 5

6 6

7 Why choose Powermax over other cutting or gouging systems More productive Our consumable technology delivers faster speeds and better cut quality to help you do more in less time. Lower operating cost Faster speeds and longer consumable life lower your cost of cutting and gouging metal. Easier to use High portability, simple controls and a stable plasma arc make Powermax systems easy to operate for beginners and experts. More versatile With the largest variety of torch options for cutting and gouging, you can leverage a Powermax for many jobs. More reliable Smart design plus intense testing during product development and manufacturing keeps you up and running. Confidence Hypertherm s focus on plasma by our associate-owners, and the proven performance of our global installed base of systems gives you confidence that you are buying the best. To choose the Powermax system that will best suit your long term needs, please consider the following questions What thickness of metal will you be cutting? Powermax plasma can cut from sheet metal to 2 1/4". Choose the Powermax system with the recommended capacity for the thickness of metal you expect to cut 80% of the time or more. Will the cutting or gouging be done by a handheld torch or with an automated machine? For automated cutting, select a machine-torch compatible Powermax system with interface options for automation equipment like a CNC table, robot and track cutters. What electrical service do you use? Knowing the incoming line voltage, phase and breaker size where the system will be used ensures your electrical service can support the Powermax system you choose. Will the plasma system be powered by an engine-drive generator? Each Powermax system requires a minimum kilowatt output to deliver full performance. Refer to page 16 for more operating information using generators. What is your compressed gas source? Powermax systems require compressed air or nitrogen for operation. The gas must be dry and free of contaminants. An optional filter is available to ensure clean and dry gas. Refer to gas flow rate and pressure requirements in the chart on page 16. 7

8 Powermax uses Handheld, cutting and gouging Freehand Straight guide Circle guide Weld removal Templates X-Y-Z cutting Light table Heavy table Robotic Mechanized straight-line cutting and gouging Bevel cut Straight cut Gouging Use with a generator Pipe cutting Handheld cutting in the field Portable mechanized cutting In the field In the factory 8

9 Powermax30 XP The Powermax30 XP delivers high performance in a small, portable package. With its two-in-one design, the system provides high-power capability for thick metal cutting, plus FineCut consumables for detailed, thin metal cutting. Combined with a custom carry case, shaded glasses, cutting gloves and adapter plugs for 120 V or 240 V circuits, this system is designed to get you cutting quickly and easily. Model (input voltage, phase, certification) Powermax30 XP ( V,1-PH, CSA) Handheld system Duramax LT torch 15' Capacity Thickness Cut speed Recommended 3/8" at 20 ipm 1/2" at 10 ipm Severance 5/8" at 5 ipm Duramax LT hand torch Watch a Powermax system demonstration at 9

10 Powermax30 AIR The small size and light weight of the new Powermax30 AIR, with an internal compressor, make it a highly portable system enabling metal cutting just about anywhere there is single phase power. Simply plug it in, attach the work clamp and you are ready to cut. The internal compressor eliminates the need for an external air compressor and filter to operate the plasma system. The fast cutting speeds and superior cut quality of Powermax plasma enable you to finish jobs quicker. Model (input voltage, phase, certification) Powermax30 AIR ( V, 1-PH, CSA) Handheld system AIR T30 torch 15' AIR T30 hand torch Capacity Thickness Cut speed Recommended 5/16" 20 ipm 3/8" 10 ipm Severance 5/8" 5 ipm

11 Powermax45 Our best selling system, the Powermax45 is the most trusted 1/2" system on the market. Being the lowest amperage system in the Powermax line with mechanized capability, it has a broad set of application capabilities that make it a truly multi purpose tool for cutting and gouging. The machine interface for CNC control and FastConnect torch connection increases versatility for handheld and mechanized use. Below are some of the most common system configurations which include a power supply, torch, work cable and starter consumable kit. Model (input voltage, phase, certification) Powermax45 ( V, 1-PH, CSA) Powermax45 (480 V, 3-PH, CSA) T45v torch 20' Handheld systems T45v torch 50' Mechanized systems T45m torch 25' T45m torch 50' Capacity Thickness Cut speed Recommended 1/2" at 20 ipm 3/4" at 10 ipm T45v hand torch T45m machine torch Severance 1" at 5 ipm Pierce 1/2"* *Pierce rating for handheld use or with automatic torch height control 11

12 Powermax65 Offering the latest technological innovations, like Smart Sense technology to automatically adjust the gas pressure, the Powermax65 helps you do more than ever before. A variety of Duramax torch styles provide exceptional versatility for hand cutting or gouging, portable automation, X-Y table and robotic cutting or gouging. Below are some of the most common system configurations, which include a power supply, torch, work cable and starter consumable kit. Model (input voltage, phase, certification) Powermax65* ( V, 1/3 PH, CSA) *with CPC port 75 torch 25' Handheld systems 75 torch 50' 75 and 15 torches 25' 180 full-length torch 25' with remote pendant Mechanized systems 180 full-length torch 50' with remote pendant 180 full-length torch and 75 hand torch 25' hand torch Capacity Thickness Cut speed Recommended 3/4" at 20 ipm 1" at 10 ipm Severance 1-1/4" at 5 ipm Pierce 5/8"* *Pierce rating for handheld use or with automatic torch height control 15 hand torch 180 mini machine torch 180 full-length machine torch

13 Powermax85 The premier system for cutting 1", the Powermax85 has the same features and options as the Powermax65, but with more power from a max output current of 85 amps. A variety of Duramax torch styles provide exceptional versatility for hand cutting or gouging, portable automation, X Y table and robotic cutting or gouging. Below are some of the most common system configurations, which include a power supply, torch, work cable and starter consumable kit. Model (input voltage, phase, certification) Powermax85* ( V, 1/3-PH, CSA) *with CPC port 75 torch 25' Handheld systems 75 torch 50' 75 and 15 torches 25' 180 full-length torch 25' with remote pendant Mechanized systems 180 full-length torch 50' with remote pendant 180 full-length torch and 75 hand torch 25' hand torch 15 hand torch Capacity Thickness Cut speed Recommended 1" at 20 ipm 1-1/4" at 10 ipm 180 mini machine torch Severance 1-1/2" at 5 ipm Pierce 3/4"* *Pierce rating for handheld use or with automatic torch height control 180 full-length machine torch 13

14 Powermax105 At 105 amps, the Powermax105 offers cut speeds more than three times faster than oxyfuel. Smart Sense technology in the Powermax105 also detects consumable end-oflife, automatically turning off power to the torch to prevent potential damage to other parts or the work piece. A variety of Duramax torch styles provide exceptional versatility for hand cutting and gouging, portable automation, X Y table and robotic cutting or gouging. Below are some of the most common system configurations, which include a power supply, torch, work cable and starter consumable kit. Model (input voltage, phase, certification) Powermax105 ( V, 3-PH, CSA) *with CPC port and voltage divider 75 torch 25' Handheld systems 75 torch 50' 75 and 15 torches 25' 180 full-length torch 25' with remote pendant Mechanized systems 180 full-length torch 50' with remote pendant 180 full-length torch and 75 hand torch 25' hand torch 15 hand torch Capacity Thickness Cut speed Recommended 1-1/4" at 20 ipm 1-1/2" at 10 ipm Severance 2" at 5 ipm 180 mini machine torch Pierce 7/8"* *Pierce rating for handheld use or with automatic torch height control 180 full-length machine torch

15 Powermax125 With maximum power and performance for air plasma, the new Powermax125 cuts fast and thick. A 100% duty cycle, a 1" pierce capability, and a gouging metal removal rate of 27.6 lbs/ hour, make the Powermax125 the tool for any industrial cutting or gouging job. The new Duramax Hyamp torch series is available in a variety of styles to address the widest variety of cutting and gouging applications. Below are some of the most common system configurations, which include a power supply, torch, work cable and starter consumable kit. Model (input voltage, phase, certification) Powermax125* (480 V, 3-PH, CSA) Powermax125* (600 V, 3-PH, CSA) *with CPC port and voltage divider 85 torch 25' Handheld systems 85 torch 50' 85 and 15 torches 25' 180 full-length torch 25' with remote pendant Mechanized systems 180 full-length torch 50' with remote pendant 180 full-length torch 50' and 85 hand torch 25' hand torch 15 hand torch Capacity Thickness Cut speed Recommended 1-1/2" at 18 ipm 1-3/4" at 10 ipm 180 mini machine torch Severance 2-1/4" at 5 ipm Pierce 1"** **Pierce rating for handheld use or with automatic torch height control 180 full-length machine torch Duramax and Duramax Hyamp application torches The Duramax torch series includes torches for every application need, from gouging to robotic to extended reach. 15 Duramax hand torch 45 Duramax robotic torch 90 Duramax robotic torch 180 Duramax robotic torch 45 Duramax Hyamp 2' Long torch 45 Duramax Hyamp 4' Long torch Duramax robotic torches Duramax Hyamp robotic torches Duramax Hyamp 2' Long torches Duramax Hyamp 4' Long torches ' ' All Duramax Hyamp torches are compatible with the Powermax65, 85, 105 and 125. All Duramax torches are compatible with the Powermax65, 85 and 105 only. 15

16 System specifications comparison Powermax30 XP Powermax30 AIR Powermax45 Handheld cut capacity Recommended 3/8" 5/16" 1/2" 1/2" 3/8" 3/4" Severance 5/8" 5/8" 1" Mechanized pierce capacity with automatic torch height control Not applicable Not applicable 1/2" 1 without automatic torch height control Not applicable Not applicable 3/8" Gouge capacity Metal removed per hour Not applicable Not applicable 6.2 lbs depth x width 2 Not applicable Not applicable.13 x.22" Output current A A A Input voltages V, 1-PH, 50/60 Hz V, 1-PH, 50/60 Hz V, 1-PH, Hz 480 V, 3-PH, Hz Rated output voltage 125 VDC 83 VDC 132 VDC Input current V, 1-PH, A V, 1-PH, A 200/230 V, 1-PH, 34/28 A 480 V, 3-PH, 9 A Duty cycle 3 35%, 240 V 20%, 120 V 35%, 240 V 20%, 120 V 45 A, V, 1-PH 41 A, V, 1-PH 32 A, V, 1-PH 45 A, 480 V, 3-PH 41 A, 480 V, 3-PH 32 A, 480 V, 3-PH Dimensions with handle depth x width x height 14.0 x 5.5 x 12.0" 16.5 x 7.7 x 13.1" x 6.75 x 13.7" Weight with torch 21.4 lbs 29.8 lbs 37 lbs Gas supply Air or N 2 Not applicable Air or N 2 Recommended flow rate and pressure Cutting: 4 80 psi Not applicable Cutting: 360 scfh, 6 80 psi Gouging: 360 scfh, 6 60 psi Torch lead lengths Handheld 15' 15' 20', 50', 75' Mechanized Not applicable Not applicable 15, 25, 35, 50, 75' Motor generator requirements for full arc stretch at full output 5.5 kw 5.5 kw 8 kw 1 Pierce rating for handheld use or with automatic torch height control. 2 Dependent on speed, torch angle and standoff. 3 Hypertherm s duty cycle ratings are established at 104 F, according to international standards, and are determined at actual cutting arc voltage levels. 16

17 Powermax65 Powermax85 Powermax105 Powermax125 3/4" 1" 1-1/4" 1-1/2" 1" 1-1/4" 1-1/2" 1-3/4" 1-1/4" 1-1/2" 2" 2-1/4" 5/8" 1 3/4" 1 7/8" 1 1" 1 1/2" 5/8" 3/4" 7/8" 10.7 lbs 19.5 lbs 21.7 lbs 27.6 lbs.14 x.26".23 x.28".32 x.26" x " A A A A V, 1-PH, Hz V, 1-PH, Hz V, 3-PH, 50/60 Hz 480 V, 3-PH, Hz V, 3-PH, Hz V, 3-PH, Hz 600 V, 3-PH, Hz 139 VDC 143 VDC 160 VDC 175 VDC 200/208/240/480 V, 1-PH, 52/50/44/22 A 200/208/240/480/600 V, 3-PH, 32/31/27/13/13 A 65 A, V, 1/3-PH 65 A, V, 1/3-PH 46 A, V, 1/3-PH 200/208/240/480 V, 1-PH, 70/68/58/29 A 200/208/240/480/600 V, 3-PH, 42/40/35/18/17 A 85 A, V, 3-PH 85 A, 480 V, 1-PH 85 A, 240 V, 1-PH 85 A, V, 3-PH 85 A, V, 1-PH 66 A, V, 1/3-PH 200/208/240/480/600 V, 3-PH, 50/60 Hz, 58/56/49/25/22 A 105 A, 200 V, 3-PH 105 A, 208 V, 3-PH 105 A, 240 V, 3-PH 105 A, V, 3-PH 94 A, V, 3-PH 88 A, 240 V, 3-PH 77 A, 208 V, 3-PH 74 A, 200 V, 3-PH 480/600 V, 3-PH, 50/60 Hz, 31/24 A 125 A, 480/600 V, 3-PH 19.7 x 9.2 x 17.9" 19.7 x 9.2 x 17.9" 23.3 x 10.8 x 20.0" 23.3 x 10.8 x 20.0" 64 lbs 71 lbs 100 lbs 480 V lbs 600 V lbs Air or N 2 Air or N 2 Air or N 2 Air or N 2 Cutting: 400 scfh, psi Cutting: 400 scfh, psi Cutting: 460 scfh, psi Cutting: 550 scfh, psi Gouging: 450 scfh, psi Gouging: 450 scfh, psi Gouging: 480 scfh, psi Gouging: 450 scfh, psi 25, 50, 75' 25, 50, 75' 25, 50, 75' 25, 50, 75' 15, 25, 35, 50, 75' 15, 25, 35, 50, 75' 15, 25, 35, 50, 75' 15, 25, 35, 50, 75' 15 kw 20 kw 30 kw 40 kw Handheld cut capacity Recommended The thickness of mild steel on which the system delivers good cut quality and speeds at about 20" per minute or faster. Eighty percent or more of cutting should be at the recommended thickness. Severance The thickness that can be reasonably severed at a minimum of 5" per minute but with poor cut quality. Cutting the severance thickness should be infrequent. Capacity ratings There is no industry standard for rating plasma systems, so it is important to take care when comparing brands. Mechanized pierce capacity The thickness of mild steel that may be pierced using an automated torch height control without excessive wear on the consumable parts. Cut capacity for edge starts is the same as handheld capacity. 17

18

19 Automated cutting and gouging with Powermax Industrial duty cycles, low operating costs and Hypertherm reliability make Powermax systems ideal for many mechanized applications. Powermax systems are used on X-Y cutting tables, 3-dimensional robots, track cutting systems and pipe cutting and beveling machines. FastConnect technology enables easy switching between handheld and machine torches. Using a Powermax plasma system in a mechanized application The equipment required to run a Powermax system in a mechanized application varies. For example: To automate long, straight cuts, a mechanized torch, a remote on/off pendant and track cutter may be all that is needed. An entry-level X-Y table application requires a mechanized torch, control cable, and a computer numeric control (CNC) along with the table and lifter. For optimum performance on an X-Y table, a programmable torch height control and nesting software would also be used. Proper torch height reduces dross while improving cut angularity and speed. One of Hypertherm s long-standing core values is a focus on minimizing our impact on the environment. Doing so is critical to our, and our customers, success. We are always striving to become better environmental stewards; it is a process we care deeply about. Our products are engineered to go well beyond environmental regulatory requirements. We choose to meet the EU RoHS directive for restricting the use of hazardous materials, such as lead and cadmium, in our Powermax products. Our Powermax systems are manufactured in a LEED Gold designated factory where we purchase 100% renewable energy and are on a path the zero landfill waste. Powermax products are shipped in 100% recyclable packaging. We are also working to make our Powermax systems more efficient so they cut thicker and faster yet use less energy. An example of this is the Powermax65 compared to an earlier predecessor, the MAX100. Both have the same cut capacities, yet the Powermax65 is much smaller, lighter and uses less power. Mechanized communications Mechanized Powermax systems include a standard machine interface through a CPC port, which provides access to start, transfer, and divided voltage signals. For increased control of the power supply through a CNC, the Powermax65, Powermax85, Powermax105 and Powermax125 are available with an optional RS 485 serial interface port (ModBus ASCII protocol). MAX100 Powermax65 Difference Cut capacity 1-1/4" 1-1/4" SAME Output 100 A 65 A 35% less Size 21' 3 1,9' 3 90% smaller Weight 420 lbs 64 lbs 85% lighter For more information about automated cutting refer to the Powermax Mechanized Applications brochure. 19

20 Genuine Hypertherm consumables You can cut with confidence knowing that Hypertherm is dedicated to supporting your operation with high-quality parts. When purchasing consumables for your Powermax system, look for an easy to understand color code system on the packaging organized by torch series, to identify the right consumables for your Powermax handheld or mechanized torches. Consumable kits Consumable kits offer a convenient means of experiencing the versatility of Powermax plasma systems. FineCut kits feature consumables that deliver highquality cuts on thin metal for a narrow kerf and virtually dross-free cutting. All-in-one kits are customized by torch series to feature a range of consumables for cutting and gouging applications. Bulk kits economical for high volume use of select consumables. Torch series Color code T30v, T45v, T45m Blue AIR T30 Green Duramax LT Yellow Duramax and Duramax RT Red Duramax Hyamp Purple Legacy White All-in-one kits Powermax system Torch series Torch type English kit number* Powermax30 XP Duramax LT Handheld Powermax45 T45v/T45m Handheld CSA Handheld CE Powermax65 Duramax or Duramax RT Handheld Mechanized Powermax85 Duramax or Duramax RT Handheld Mechanized Powermax105 Duramax or Duramax RT Handheld Mechanized Powermax125 Duramax Hyamp Handheld Mechanized *Kits are available in different languages, contact a local distributor for ordering information. FineCut kits Torch series Torch type English kit number* Duramax Hyamp Handheld/Mechanized Duramax or Duramax RT Handheld Duramax or Duramax RT Mechanized *Kits are available in different languages, contact a local distributor for ordering information. 20

21 Duramax retrofit torches If you own a Powermax600, 800, 900, 1000, 1250, 1650 or MAX42/43 system and are not ready to purchase a new Powermax system, you can enhance the performance of your system with a Duramax retrofit torch. Duramax technology advantages Proprietary, fiber-reinforced torch handle is 5 times more impact resistant and 20% more heat resistant to withstand your toughest metal-cutting applications.* Duramax RT torches use the same consumables as new Powermax systems to provide longer consumable life and up to a 30% reduction in consumable costs.* CopperPlus electrodes, designed exclusively for use with Duramax torches, provide at least 2 times longer consumable life over standard consumables when cutting metal 1/2" and under to reduce your operating costs.** Ease of use Duramax retrofit torches use the torch connection designed for your system which makes retrofitting easy. Retrofit torches for Powermax600, 800, 900 and MAX42/43 are available with or without quick disconnect. Easy Torch Removal (ETR) connections come standard on retrofit torches for Powermax1000, 1250 and 1650 systems. * When compared with standard T60/T80/T100 torches and/or consumables for Powermax1000/1250/1650. ** Standard consumables refer to the original Hypertherm consumables designed for the system. Handheld torch lead with quick disconnect Handheld or mechanized torch lead without quick disconnect for Powermax600 CE systems Mechanized torch lead with quick disconnect Easy Torch Removal (ETR) connection Part number Torch assemblies for Powermax600/800/900 and MAX42/ Duramax HRT hand torch assembly with 25' leads Duramax HRT hand torch assembly with 50' leads Duramax HRT hand torch assembly with 25' leads** Duramax HRT hand torch assembly with 50' leads** Duramax HRT machine torch assembly with 25' leads Duramax HRT machine torch assembly with 50' leads Duramax HRT machine torch assembly with 25' leads** Duramax HRT machine torch assembly with 50' leads** **Without quick disconnect for Powermax600 CE models. Part number Torch assemblies for Powermax1000/1250/ Duramax HRT hand torch assembly with 25' leads Duramax HRT hand torch assembly with 50' leads Duramax HRTs hand torch assembly with 25' leads Duramax HRTs hand torch assembly with 50' leads Duramax MRT machine torch assembly with 25' leads Duramax MRT machine torch assembly with 50' leads 21

22 Cutting guides Circle cutting guide Quick and easy setup for accurate circles up to 28" diameter and as a stand-off guide for straight and bevel cuts. For use with Powermax system torches. Made in USA Basic kit 15" arm, wheels and pivot pin Deluxe kit 11" arm, wheels, pivot pin, anchor base and plastic case Hyamp deluxe kit 11" arm, wheels, pivot pin, anchor base and plastic case* *For use with Hyamp torches only Angle cutting guide Protractor with magnetic base holds straight or square edges to make cutting precise angles easy. Made in USA Pocket level and tape holder Magnetic base and tape holder with built-in level. Made in USA Personal protective equipment Magnetic straight edge Two magnet blocks with 24" straight edge. Made in USA Magnetic block 3-pack Attaches to any standard square or straight edge up to 1/8" thick. Slotted on three sides. Made in USA Hyamp helmet Premium auto-dim shade 8 12 with large 7.92 square inches viewing area for cutting, welding and gouging. Includes clear safety shields, pouch and sticker sheet. ANSI Z87.1, CSA Z94.3, CE Face shield Clear face shield with flip-up shade for cutting and grinding. Safety shield included ANSI Z87.1, CSA Z94.3, CE Face shield shade Face shield shade * Face shield for hard hat shade * Face shield for hard hat shade Leather neck guard (optional) Replacement shade 5 (for <40 A) Replacement shade 6 (for <60 A) Replacement shade 8 (for <80 A) Clear shield replacement Hard hat only (white) *Hard hat not included 22

23 Cutting goggles Shade 5 (for <40 A) soft body goggle fits over prescription glasses. ANSI Z87.1, CSA Z94.3, CE Basic eyewear Shade 5 adjustable eyeshade Clear safety eye shields Flip-up eyeshades Shade 5 (for <40 A) flip-up shade, anti-scratch lens and adjustable frame. ANSI Z87.1, CSA Z94.3, CE Durafit cutting gloves Designed to offer maximum dexterity and fine-motor control. Fire resistant goatskin leather and stretch Nomex backhand Reinforced leather in wear areas Made in USA Medium Large X-Large X-Large Hyamp cutting and gouging gloves Insulated for heavy duty applications. Gun-cut palm design with seamless trigger finger and extended cuff provide flexibility and protection. Fire resistant goatskin leather and suede Padded areas for extra heat and abrasion protection Made in USA Medium Large X-Large X-Large Arc-rated metalworking jersey Top quality washable welder wear made from modacrylic fabric for flame and arc flash resistance. Durable with no chemical treatment. Tested for protection and durability: ASTM a; OSHA ; NFPA 70E Arc rating = 28 cal/cm 2 Made in the USA from U.S. made 14 oz. fleece Medium, black Large, black X-Large, black X-Large, black X-Large, black Cutting blanket 5' x 6' 18 oz. fiberglass blanket protects nearby surfaces from cutting and gouging sparks. Rated for 1000 F Leather cutting gloves Pigskin grain leather

24 System accessories Work cables Three grounding connection styles. 50' and 75' lengths available. Powermax Hand clamp 25' C-style clamp 25' Ring terminal 25' Powermax Hand clamp 25' C-style clamp 25' Ring terminal 25' Powermax Hand clamp 25' C-style clamp 25' Ring terminal 25' Powermax Hand clamp 25' C-style clamp 25' Ring terminal 25' Remote pendants Remote on/off control for a machine torch attaches to the CPC port on Powermax45, 65, 85, 105 and 125 models ' ' ' Air filtration kits Ready-to-install kits with a 1-micron filter and an auto-drain moisture separator protects against contaminated air Filter only Filter plus cover for Powermax65/ Cover only for Powermax65/ Filter plus cover for Powermax105/ Cover only for Powermax105/125 Wheel/gantry kits Complete, pre-assembled kits for added mobility or mounting on a cutting table gantry Powermax65/85 wheel kit Powermax105/125 wheel kit Powermax105/125 gantry kit Leather torch sheathing Available in 25' sections, this option provides additional protection for torch leads against burn-through and abrasion Brown leather Black leather with Hypertherm logos 24

25 Machine interface cables Cables for connecting the serial interface port to CNC controllers on Powermax65, 85, 105 and 125 models RS-485 to unterminated 25' RS-485 to unterminated 50' RS-485 to 9-pin D-sub connector 25' RS-485 to 9-pin D-sub connector 50' Torch carry bags Durable bag for carrying spare torches, work cables and accessories Standard torch bag (shown) 23" x 11" x 11" Duramax Hyamp 2' torch bag Duramax Hyamp 4' torch bag Cables for connecting the CPC port to CNC controllers on Powermax45, 65, 85, 105 and 125 models pin CPC to spade connector 25' pin CPC to spade connector 50' pin CPC to spade connector 25', for divided arc voltage pin CPC to spade connector 50', for divided arc voltage pin CPC to D-sub connector 50', for divided arc voltage Serial interface port (RS-485) CPC port System carry case Rugged case for protecting and storing the Powermax30 or 30 XP and accessories System dust covers Made from a flame-retardant vinyl, a dust cover will protect your Powermax system for years Powermax30/30 XP Powermax30 AIR Powermax Powermax65/ Powermax105/125 Mechanized communication kits Upgrade kits for the Powermax65, 85, 105 and 125 systems for mechanized applications CPC port with selectable voltage divider board, Powermax65 and CPC port with selectable voltage divider board, Powermax105 and Upgrade kit: Serial interface port (RS-485) Gouging heat shield Additional protection when gouging Duramax torches Hyamp torches T45v and T60/80/100 torches 25

26 26

27 Nearly 50 years of cutting excellence At Hypertherm, our sole focus is cutting. Every Associate from our engineers to our manufacturing and service teams is completely focused on providing our customers with the best cutting solutions in the industry. It s a mission stretching back nearly 50 years to our first industrial cutting patent. Today, our patent wall continues to expand as we innovate tirelessly to introduce new plasma, laser and waterjet technologies and services that will help you achieve optimal cutting outcomes that support your business objectives. So, whether you re cutting precision parts in North America, constructing a pipeline in Norway, fabricating agricultural machinery in Brazil, gouging out welds in the mines of South Africa, or building a skyscraper in China, you can count on Hypertherm. No matter what you cut, where you cut, or how you cut, we are here to guide you toward the cutting solution that is right for you. 100% employee ownership At Hypertherm, we aren t just employees: we re all owners. Ownership is a powerful motivator that ensures our customers not investors are our top priority. As owners, we make sure every product is built to the highest quality and that our service is second to none. Worldwide presence and strength Hypertherm is a key partner for your fabrication needs and has built a global organization focused on providing cutting performance solutions. Key elements of the Hypertherm formula include: Dedicated associates concentrating on cutting technology Regional sales, customer service and technical service for local support Broad application experience and proven results Complete product line solutions for your cutting needs Commitment to customer-centered product design, support and support Hypertherm wall of patents 27

28 For location nearest you, visit: Engineered and assembled in the USA ISO 9001:2008 Hypertherm, Powermax, FineCut, Duramax, FastConnect, Smart Sense and CopperPlus are trademarks of Hypertherm Inc. and may be registered in the United States and/or other countries. All other trademarks are the property of their respective owners. Environmental stewardship is a core value of Hypertherm. Our Powermax products are engineered to meet and exceed global environmental regulations including the RoHS directive. 3/2015 Hypertherm Inc. Revision