Interfaces and Sync Processors

Transcription

1 Interfaces and Sync Processors Kramer Electronics has a full line of video, audio and sync interfaces. The group is divided into two sections Format Interfaces and Video Sync Processors. The Format Interface products include:! Video Decoders: These machines are used to decode (convert) a Composite video signal to Y/C and to decode a Composite or Y/C signal to RGBS or Y, R-Y, B-Y.! Video Encoders: Video Encoders create a Chrominance signal from video components, e.g., they are used to convert RGBS and/or Y, R-Y and B-Y signals to Composite Video and Y/C.! Video Transcoders: The Video Transcoders are bi-directional converters operating simultaneously - converting between RGBS and Y, R-Y and B-Y in both directions in the same machine, or going from Composite to Y/C bi-directionally.! Audio Transcoders: Used in audio and video production studios for converting from unbalanced low-level audio to balanced high-level audio, bi-directionally. The Video Sync Processors include:! Video Sync Generators : The machines in this category generate standard video sync and black burst for studio genlock.! Video Sync Converters: The machines in this category convert between the different sync formats - Composite, separate H & V syncs; and Analog or TTL level. Sync to Green adding and Separating is also done by a machine in this category.! Video Sync Restorers: These machines restore and re-build lost or distorted sync signals, and full black burst signals. Applications: # Conversion between different video and audio formats, to easily link elements of studio hardware. # Chroma Key generation from different video sources. # Special color effects generation and color correction. # Color Bar generation, genlocked to input Black Burst. # Sync stabilization, restoration and conversion in a video studio. Page 4.1

2 Format Interfaces: Model Size Page Function Inputs Outputs Remarks FC-10 Compact 4.3 Transcoder 1 x CV 1 x Y/C FC-10D Compact 4.4 Transcoder 1 x CV 1 x Y/C FC U 4.5 Decoder 1 x CV 1 X Y/C FC-4O41C 19 1U 4.6 Encoder RGBS YUV FC U 4.7 Transcoder RGBS YUV FC U 4.8 Encoder Decoder CV, Y/C YUV FC U 4.9 Decoder 1 x CV 1 x Y/C FC U 4.10 Audio Transcoder 4 x Bal. 4 x Unbal. 1 x Y/C 1 x CV 1 x Y/C 1 x CV RGBS CV Y/C YUV RGBS YUV, CV Y/C YUV RGBS 4 x Bal. 4 x Unbal. A 12 VDC fed, Bi-directional CV to Y/C and Y/C to CV Transcoder. A 12 VDC fed, Bi-directional, Multistandard CV to Y/C and Y/C to CV Transcoder with digital processing, and comb filter. A 19", Rack mountable video Decoder. A 19", rack mountable looping video Encoder with Genlock. A 19" rack mountable, Bi-directional Component Video Transcoder. A 19", rack mountable, Bi-directional Multistandard format Transcoder. A 19" rack mountable, Multistandard Video Decoder. A 19", rack mountable, Balanced / Unbalanced Audio Transcoder. 401C TOOL 9.16 Coder / DA 1 x Y/C 2xCV+Y/C Y/C 1:2 DA + Composite Coder and a 1:2 Composite DA. 401D TOOL 9.17 Decoder 1 x CV 1 x Y/C Composite to Y/C decoder. Video Sync Processors: Model Size Page Function Inputs Outputs Remarks SG-6N Compact 4.11 Sync Stabilizer SG Transcoder Cs, Hs, Vs SG9 Desktop 4.13 Sync and Burst Restorer SG-11 Desktop 4.14 Sync / Green G+S Adder/Separator G,S SG-6003B 19 1U 4.15 Black Burst Generator SG U 4.16 Black Burst / Bar Generator VP-800 TOOL 9.31 VGA/XGA Bar Generator 1 x CV 1 x CV A 12 VDC fed, compact sized, Sync Stabilizer for PAL and NTSC. Cs, Hs, Vs 1 x CV I x CV Sync N/A 1 x CV (Genlock) G, S G+S Burst, Color Bar, Audio Burst, Color Bar, H & V sync, Audio A 19" Rack mountable universal Video Sync Transcoder. A compact sized, video Black Burst Restorer and Sync Separator. A compact sized Sync to Green Adder / Separator. A 19" rack mountable, Black Burst, Color Bar and Audio Tone Generator. Digitally synthesized; Multistandard, SCH and delay controls, RS-232 control, saves setup. NA VGA/XGA Color Bar Generator for VGA/XGA for 4 resolution modes: 640x480, 800x600, 1024x768, 1280x1024. Page 4.2

3 Composite - Y/C Transcoder FC-10 The Kramer FC-10 is a format converter designed to interface between composite video and s- Video (Y/C). The decoding channel converts a typical composite video signal on a BNC connector to s-video on a 4pin connector. Encoding (s-video to composite) is also provided for simultaneous bidirectional operation. The FC-10 is a compact desktop size unit but two can be installed in a standard 19 rack using the RK-50R rack mount kit if desired. A 12 volt power supply is included for typical use but the optional, rack mountable VA-50P can power up to six Kramer devices requiring 12VDC. 1 composite video 1Vpp/75 Ω on a BNC connector. 1 s-video: Luma: 1Vpp/75 Ω, Chroma: 0.3 Vpp/75 Ω. 1 composite video 1 Vpp/75 Ω on a BNC connector. 1 s-video: Luma: 1Vpp/75 Ω; Chroma: 0.3Vpp/75 Ω. VIDEO BANDWIDTH: 10 MHz -1dB. DIFF. PHASE: 0.3 Deg. DIFF. GAIN: 0.36%. MAX. VIDEO OUTPUT: 2.5Vpp/75 Ω. LUMA S/N RATIO: 79 db. K-FACTOR: <0.05% (Y/C to CV). 16.5cm x 12cm x 4.5cm (6.5" x 4.7" x 1.8", W, D, H.) 12V DC, 110 ma. 0.6 Kg. (1.3 Lbs.) Approx. 12VDC power supply. OPTIONS: VA-50P 6 outlet power supply, RK-50R rack kit. # Teleconference systems. # Presentation rooms. # Switching systems requiring a common signal format. Page 4.3

4 Composite-Y/C Comb Filter/Transcoder FC-10D The Kramer FC-10D is a format converter designed to interface between composite video and s-video (Y/C). The decoding from composite to Y/C is done digitally using an adaptive comb filter and DSP techniques to minimize dot-crawl and cross-color. A built-in vertical enhancer circuit reduces noise and dot-crawl on the Y signal. Encoding (s-video to composite) is also provided for simultaneous bi-directional operation. The FC-10D is a compact desktop size unit but two can be installed in a standard 19 rack using the RK-50R rack mount kit if desired. A 12-volt power supply is included for typical use but the optional, rack mountable VA-50P can power up to six Kramer devices requiring 12VDC. 1 Composite Video, 1Vpp/75 Ω on a BNC connector. 1 Super-Video: Luma: 1Vpp/75 Ω, Chroma: 0.3 Vpp/75 Ω. 1 Super-Video: Luma: 1Vpp/75 Ω; Chroma: 0.3Vpp/75 Ω. 1 Composite Video, 1 Vpp/75 Ω on a BNC connector. CONTROLS: Two electronic touch switches to select PAL or NTSC operation. VIDEO BANDWIDTH: 100 MHz -3dB (Y/C to CV), >5.8 MHz (CV to Y/C, PAL). DIFF. PHASE: 0.15 Deg (Y/C to CV, NTSC). DIFF. GAIN: 0.7% (Y/C to CV, NTSC). LUMA S/N RATIO: >72 db in both directions, (PAL). K-FACTOR: <0.1% (Y/C to CV), <0.5% (CV to Y/C, NTSC). 16.5cm x 12cm x 4.5cm (6.5" x 4.7" x 1.8", W, D, H.) 12V DC, 200mA Kg. (1.4 Lbs.) Approx. 12VDC power supply OPTIONS: VA-50P 6 outlet power supply, RK-50R rack kit Typical applications: # Teleconference systems. # Presentation rooms. # Switching systems requiring a common signal format. Page 4.4

5 RGB Decoder FC-19 The KRAMER FC-19 is an industrial level RGB Decoder, which converts both Composite Video and Super-Video to their RGB components. An HD15 VGA type connector is provided on the back panel of the machine, with signal pinout conforming to the standard VGA connector. No scan conversion is performed in the machine, therefore, this connector can only be used with monitors capable of running at 15 khz horizontal scan rates. The output signals are available simultaneously on the BNC connectors and on the HD15 connector and may be used independently. 1 Composite Video, 1Vpp/75 Ω a BNC type connector. (Y) (Luma) 1Vpp / 75 Ω, (C) (Chroma) 0.3Vpp/75Ω on a 4P connector. RED, GREEN, BLUE, SYNC at 0.7Vpp / 75Ω, on BNCs. RGB (Analog), HS, VS TTL level on HD15 type connector at video scan rate. VIDEO GAIN ERROR: Less than 0.5dB. S/N RATIO: 64dB. LUMA BANDWIDTH: 10 MHz -3dB. RESIDUAL SC.: -38dB. NONLINEARITY: < 3%. RGB BALANCE ERROR: Less than 0.5dB. 19-inch (W), 7-inch (D) 1U (H) rack mountable. 230 VAC, 50/60 Hz, (115VAC, U.S.A.), 6 VA. 2.6 Kg. (5.8 Lbs.) Approx. Power cord. Typical applications: # Interfacing between a Super-Video (YC) source and a TV receiver with RGB input capabilities for excellent quality RGB presentations. # Display of Composite Video or s-video on wide screen displays, which accept RGB inputs, for best quality. # Chroma key generation from a Composite or Super-Video source, eliminating the need for a threetube camera. # Viewing Composite or Super-Video on a PC multiscan monitor capable of operating at 15 khz horizontal-scan frequency. Page 4.5

6 Component to Video Encoder FC-4041C The Kramer FC-4041C is a high quality format converter designed to encode RGBS, RGsB, or Y, R-Y, B-Y component signals into composite video and s-video. Each input has a loop-through connector and termination switch, allowing for parallel connection to other receiving devices. Front panel buttons are provided to select the incoming signal format and sync format. The outputs are DC coupled and black-level clamped. Note that the FC-4041C does not perform any scan rate conversion, and is not designed to receive high frequency computer-video signals. The FC-4041C is rugged, dependable, and is housed in a professional 19 rack mountable enclosure requiring one vertical space. Red (or R-Y), Green (or Y), Blue (or B-Y) - 0.7Vpp/75Ω and Sync - 0.3Vpp/75Ω looping, on BNCs with termination switches. 1Vpp/75Ω Composite Video on a BNC connector, 1Vpp/75Ω Luma (Y), 0.3Vpp / 75Ω Chroma (C) on a 4P connector. CONTROLS: Sync/Sync on Green; input selector - RGBS or Y, R-Y, B-Y. DIFF. GAIN: 0.24%. DIFF. PHASE: 0.26 Deg. VIDEO BANDWIDTH: Exceeding 12 MHz (Y). NON LINEARITY: Less than 0.5 db. DC CLAMP: 0 VDC Black Level. RESIDUAL SC: -34dB. 19 inch (W), 7 inch (D), 1U (H) rack mountable. 230 VAC, 50/60 Hz, (115VAC, U.S.A.) 6 VA. 2.6 Kg. (5.8 Lbs.) Approx. Power cord. # Video production, editing, and duplication studios. # Professional display systems requiring format change for compatibility with switching/routing systems or display devices. # Operates as a high quality black burst generator when no input is connected. Page 4.6

7 RGB - Component Transcoder FC-4042 The Kramer FC-4042 is a high quality format converter designed to transcode between the two most widely used professional video signal formats, RGBS and Y, R-Y, B-Y. The unit has two completely separate channels, which can operate simultaneously. The first converts Y, R-Y, B-Y to RGBS, and the second works in the opposite direction to convert RGBS to Y, R-Y, B-Y. Front panel buttons assign the sync format as RGBS or RGsB for each channel. Outputs are DC coupled. The FC-4042 is rugged, dependable, and is housed in a professional 19 rack mountable enclosure requiring one vertical space. 1 component video - (Y, R-Y, B-Y) 1V, 0.7V, 0.7Vpp/75 Ω on BNCs. 1 RGBS: 0.7Vpp/75 Ω, for 100% saturation, on BNCs. 1 component - (Y, R-Y, B-Y) 1V, 0.7V, 0.7Vpp/75 Ω on BNCs. 1 RGB: 0.7Vpp/75 Ω, for 100% saturation, on BNCs. Sync output - 2Vpp/75 Ω, 4Vpp unloaded (TTL), on BNCs. CONTROLS: Switch selection between sync/sync-on-green of RGB signals (front panel.). VIDEO BANDWIDTH: 50 MHz -3dB. K-FACTOR: 0.4%. NON LINEARITY: Less than 0.2%. MAX. SIGNAL OUTPUT: 2Vpp/75 Ω. Y S/N RATIO: Better than 71 db. 19 inch (W), 7 inch (D), 1U (H) rack mountable. 230 VAC, 50/60 Hz (115VAC in the U.S.A.) 7.6 VA. 2.6 Kg. (5.8 Lbs.) Approx. Power cord. # Video production, editing, and duplication studios. # Professional display systems requiring format change for compatibility with switching/routing systems or display devices. # Rental and staging. Page 4.7

8 CV/s-Video - Component Transcoder FC-4043 The Kramer FC-4043 is a high quality format converter designed to transcode between composite or s-video, and component video (Y, R-Y, B-Y) bi-directionally. The unit has two completely separate channels, which can operate simultaneously. The first is a decoder, which converts composite or s-video signals to component video, and the second is an encoder, which converts component video to composite and s-video. The FC-4043 is a multi-standard device, which automatically recognizes the incoming standard, and allows the user to set the output standard. The decoding operation is microprocessor controlled via the internal I 2 C bus, and allows standards conversion between PAL and SECAM. It is rugged, dependable, and is housed in a professional 19 rackmountable enclosure requiring one vertical space. Decoder: 1 composite video - 1Vpp/75 Ω, 1 Y/C: 1Vpp/75 Ω (Luma), 0.3Vpp/75 Ω (Chroma) on 4P type connector. Encoder: 1 component - (Y, R-Y, B-Y) 1V, 0.7V, 0.7Vpp/75 Ω. Decoder: 1 component - (Y, R-Y, B-Y) 1V, 0.7V, 0.7Vpp/75 Ω. Encoder: composite video - 1Vpp/75 Ω, Y/C - 1Vpp/75 Ω (Luma), 0.3Vpp/75 Ω (Chroma). CONTROLS: Standard selection (encoder), composite/ Y/C selection (decoder), HUE control (NTSC only), all via front touch switches. DC CLAMP ERROR: +/- 20 mv. DIFF. GAIN: 0.21%. DIFF. PHASE: 0.19 Deg. RESIDUAL SC: Composite to Y=30 mv, Y/C to Y = 15 mv. 19 inch (W), 7 inch (D), 1U (H) rack mountable. 230 VAC, 50/60 Hz, (115VAC, U.S.A.) 19.5 VA. 2.6 Kg. (5.8 Lbs.) approx. Power cord. # Video production, editing, and duplication studios. # Professional display systems requiring format change for compatibility with switching/routing systems or display devices. # Rental and staging. Page 4.8

9 CV/s-Video to RGB & Component Decoder FC-4044 The Kramer FC-4044 is a high quality format converter designed to convert a composite or s- Video signal into component video (Y,R-Y,B-Y) and RGBS. The component and RGBS outputs operate simultaneously. Front panel buttons are provided to select the incoming signal format, outgoing sync format, the video standard, and adjust the HUE of the output. The FC-4044 is a multistandard device compatible with all common standards including NTSC, NTSC 4.43, PAL, and SECAM. The FC-4044 s decoding operation is microprocessor controlled via the internal I 2 C bus. It is rugged, dependable, and is housed in a professional 19 rack mountable enclosure requiring one vertical space. 1 composite video - 1Vpp/75 Ω on BNC type connector. 1 Y/C: 1Vpp/75 Ω (Luma), 0.3Vpp/75 Ω (Chroma) on 4P type connector. 1 component - (Y, R-Y, B-Y) 1V, 0.7V, 0.7Vpp/75 Ω on BNC type connectors. 1 RGB: 0.7Vpp/75 Ω, for 100% saturation, on BNC type connectors. composite sync - 2Vpp/75 Ω, negative polarity. CONTROLS: Standards selection by front touch switches, automatic or manually forced. Composite / Y/C front touch switch selection. Green/green + sync and HUE control (NTSC only) via front touch switches. NON LINEARITY: Less than 0.2 db. K-FACTOR: 1.2 %. DC CLAMP ERROR: +/- 20 mv. RESIDUAL SC: Composite to Y=30mV, Y/C to Y = 15mV. 19 inch (W), 7 inch (D), 1U (H) rack mountable. 230 VAC, 50/60 Hz, (115VAC, U.S.A.) 6.9 VA. 2.6 Kg. (5.8 Lbs.) Approx. Power cord. # Video production, editing, and duplication studios. # Professional display systems requiring format change for compatibility with switching/routing systems or display devices. # Rental and staging. Page 4.9

10 Balanced Audio Transcoder FC-4208 The Kramer FC-4208 is a high quality format converter designed to transcode between balanced and unbalanced audio signals. A total of eight channels are provided, and all operate simultaneously. The first four channels convert balanced signals on XLR connectors to the unbalanced format on RCA connectors, and the second four channels operate in the opposite direction, converting unbalanced signals to the balanced format. The FC-4208 provides a cut/boost control for each channel, which allows the user to set optimum output levels. Very low noise and distortion components are used throughout. It is rugged, dependable, and is housed in a professional 19 rack mountable enclosure requiring one vertical space. BANDWIDTH: THD: MAX. OUTPUT: S/N RATIO: 4 balanced +4dBm / 50kΩ on female XLR connectors. 4 unbalanced 1Vpp / 50kΩ on RCAs. 4 unbalanced 1Vpp / 49Ω on RCAs. 4 balanced +4dBm / 49Ω on male XLR connectors. 30 khz 1dB. Less than 0.02%. 18Vpp. Better than 89 db. 19 inch (W), 7 inch (D), 1U (H) rack mountable. 230 VAC, 50/60 Hz (115VAC, U.S.A.) 3.7 VA. 2.4 Kg. (5.3 Lbs.) Approx. Power cord. # # # # Video and audio production facilities. Audio recording studios. Professional display systems. Live sound reinforcement applications. Page 4.10

11 Video Sync Stabilizer SG-6N The Kramer SG-6N is a high quality sync stabilizer designed to strip and replace corrupted or missing sync information from a video signal. It is especially useful with high generation tapes carrying time-code or teletext information, which can interfere with image stability. In many cases the SG-6N can replace or enhance the operation of a time base corrector. It operates in PAL and NTSC, and a rear panel switch selects operation mode. A 12VDC power supply is provided for typical operation, but the optional VA-50P powers up to six Kramer products requiring 12VDC. 1 composite video 1Vpp/75 Ω on BNC type connector. 1 restored composite video 1Vpp/75 Ω on BNC type connector. VIDEO BANDWIDTH: 25 MHz -3dB. S/N RATIO: 74 db. DIFF. GAIN: 0.35%. DIFF. PHASE: 1 Deg. MAX. SIGNAL OUTPUT: 2Vpp/75Ω. COUPLING: AC (Output). 12cm x 6.5cm x 4.5cm (4.7" x 2.5" x 1.8", W, D, H.). 12 VDC 40mA Kg. (1.3 Lbs.) approx. 12VDC power supply. OPTIONS: VA-50P six outlet power supply, RK-50R rack kit holds 2 units in 2 spaces. # Restoring sync stability in high generation videotape copies at low cost. # Removal of interfering and distorted vertical and horizontal information such as time-code, teletext, etc., which affect signal stability. Page 4.11

12 Universal Sync Transcoder SG-7 The Kramer SG-7 is a universal sync Transcoder designed to interface between the most widely used professional video sync formats. There are a total of three discreet channels, all of which can operate simultaneously. Channel one breaks composite sync out into its separate horizontal and vertical components, channel two combines separate H & V into composite sync, and channel three provides looping H & V inputs which are converted to dual composite sync outputs. The SG-7 is suitable for many applications in studios and display systems. It is housed in a rugged, professional enclosure designed to fit in one vertical space of a standard 19 rack. INPUT CHANNEL 1: One composite sync >0.3Vpp/75 Ω or 1 TTL level composite sync 5 Vpp/ 47k on a BNC type connector with Hi-Z/75Ω switch, at video frequencies only. OUTPUTS CHANNEL 1: H and V syncs on BNCs - TTL level, 1 Vpp when 75Ω loaded, 15khz, 50/60 Hz. INPUTS CHANNEL 2: H and V TTL level syncs, any polarity and any frequency, 5 Vpp / 47k on BNCs. OUTPUTS CHANNEL 2: Composite TTL level sync on a BNC, 1Vpp when 75Ω loaded. INPUTS CHANNEL 3: H and V looping analog syncs, > 0.3Vpp / 75Ω with termination switches on BNCs, at any frequency. OUTPUTS CHANNEL 3: Composite analog sync 1Vpp/75Ω on a BNC and a TTL level composite sync. (or 1Vpp/75Ω analog when terminated with a 75Ω resistor) on an additional BNC. 19 inch (W), 7 inch (D), 1U (H) rack mountable. 230 VAC, 50/60 Hz, (115VAC, U.S.A.) 3.2 VA. 2.3 Kg. (5.1 Lbs.) Approx. Power cord. # Any professional system requiring a change of sync format for compatibility. # Unique multi-channel function solves many applications. Page 4.12

13 Video Black Burst Restorer SG-9 The Kramer SG-9 is a video black burst restorer designed to strip sync and color burst from a composite video signal, then regenerate it at the output using high quality generators. It is ideal for stabilizing video sources which have corrupted or missing horizontal and vertical sync pulses or color burst. In many cases the SG-9 can be used instead of a time base corrector and, if a TBC is required, the SG-9 can enhance its operation. In addition to the restored video output, a sync output is provided for genlocking and other uses. Note that the SG-9 requires an incoming signal in order to operate, it should not be used as a stand-alone sync or burst generator. The SG-9 is dependable, rugged, and can be rack mounted using the optional RK-MED kit, which holds one unit in two vertical spaces of a standard 19 rack. 1 composite video 1Vpp/75 Ω on a BNC. 1 restored composite video 1Vpp/75 Ω on a BNC. Composite sync, TTL level unloaded, 2Vpp/75 Ω loaded, on a BNC. VIDEO BANDWIDTH: 35 MHz -1dB. DIFF. GAIN: 0.8%. DIFF. PHASE: 0.5 Deg. K-FACTOR: 0.1%. MAX. SIGNAL OUTPUT: 2Vpp/75 Ω. COUPLING: DC (Output). 24.5cm x 18cm x 4.5cm (9.6" x 7" x 1.8", W, D, H.). 230 VAC, 50/60 Hz (115VAC, U.S.A.) 4.3 VA. 1.5 Kg. (3.3 Lbs.) Approx. Power cord. OPTIONS: Model RK-MED rack mount kit. # Restoring sync stability and color burst in high generation videotape copies at low cost. # Many production, editing, and duplication applications. Page 4.13

14 Sync-Green Adder/Separator SG-11 The Kramer SG-11 Sync to Green Adder / Separator interfaces between two of the most widely used professional component video formats, RGsB and RGBS. In many video studios and production applications there is a need to convert from one format to the other, and the Kramer SG- 11 is the perfect choice - as it operates simultaneously in both directions. 1 Green 0.7Vpp/75 Ω, One Sync 0.3Vpp/75 Ω on BNCs. 1 Sync on Green 1Vpp/75 Ω on a BNC. 1 Sync on Green 1Vpp/75 Ω on a BNC. 1 Green 0.7Vpp/75 Ω, One Sync 1Vpp/75 Ω on BNCs. CONTROLS: Output sync tip DC level selector switch (rear). VIDEO BANDWIDTH: 21 MHz -3dB. NON LINEARITY: Less than 1%. MAX. SIGNAL OUTPUT: 2Vpp/75 Ω. G S/N RATIO: Better than 73 db. 24.5cm x 18cm x 4.5cm (9.6" x 7" x 1.8", W, D, H.) 230 VAC, 50/60 Hz, (115VAC, U.S.A.) 4.1 VA. 2.9 Kg. (6.4 Lbs.) Approx. Power cord. OPTIONS: RK-MED rack kit holds one unit in two vertical spaces. # Any professional system requiring high quality RGsB / RGBS conversion # Rental and staging # Interfacing between RGsB medical imaging sources to RGBS display devices # Specialized military workstation applications Page 4.14

15 Black Burst/Bar Generator SG-6003B The Kramer SG-6003B is a broadcast quality black burst and color bar generator for video studio applications. It provides three identical black burst outputs, a color subcarrier output, a color bar output, and two 1 khz, crystal stabilized audio outputs. State-of-the-art technology is used throughout the SG-6003B including crystal controlled oscillators for sync and Chroma, and highly accurate internal sync/subcarrier genlock, both with long term stability. The number of outputs may be increased by using a Kramer distribution amplifier such as the VM-1010, VM-1015, VM-1021 etc. 3 black burst signals, 0.3 Vpp/75 Ω, (sync) 1 color bar output 1Vpp/75Ω, 1 subcarrier output, 1Vpp/75 Ω on BNC connectors. Two audio 1kHz, 1Vpp/100Ω outputs on RCA connectors. COLOR BAR SATURATION: Preset to 75%, may be ordered at 100%. PHASE ERROR: Less than 1 degree. SYNC OSCILLATOR: Crystal controlled. SC OSCILLATOR: Crystal controlled. SYNC/SC: Fully Genlocked. STABILITY: Better than 50 PPM. 19 inch (W), 7 inch (D), 1U (H) rack mountable. 230 VAC, 50/60 Hz, (115VAC, U.S.A.) 5.7 VA. 2.4 Kg. (5.3 Lbs.) Approx. Power cord. OPTIONS: Kramer distribution amplifier for additional outputs. # Studio master genlock to one stable source. # Black or color bar reference for professional video cameras that need a stable reference. # Test and alignment tool for professional video/audio equipment. # Color bar generator as filler for recording in a duplication studio. Page 4.15

16 Black Burst/Bar Generator SG-6005 The Kramer SG-6005 is a broadcast quality multi-standard black burst, color bar, sync and audio generator designed for a variety of video studio applications. It is exceptionally full featured, offering six identical black burst outputs, a color bar output, a user programmable color matte, horizontal and vertical sync outputs, as well as balanced and unbalanced 1 khz, crystal stabilized audio outputs. The unit maybe genlocked to an external video reference or it may operate as a stand-alone generator based on its high precision timing components. It uses digital synthesis technology for signal generation and allows full SCH/Phase control, delay of output relative to the genlock input and additional delay of the sync outputs. The SG-6005 may be RS-232 controlled from a PC, and firmware is easily upgraded using a computer. The required SCH/Phase shifts and delay may be displayed on a large seven-segment LED display. The number of outputs may be increased by using a Kramer video distribution amplifier like the VM-1010, VM-1015, or VM-1021, etc. INPUT: COLOR BAR: CONTROLS: PHASE ERROR: SYNC OSCILLATOR: SC OSCILLATOR: SYNC/SC: STABILITY: OPTIONS: 1 composite video, looping, 1Vpp /75Ω, on BNCs with a termination switch. 6 black burst signals, 0.3 Vpp/75 Ω, (sync) 1 color bar output 1Vpp/75Ω, 2x 1kHz, +4dBm/47Ω outputs on XLRs, 2x 1kHz, 1Vpp/100Ω outputs, RCAs. 13 selectable patterns. H control: +/- 1/2 Line, 37 ns steps; V control: 15 lines, ½ line steps. SCH control: 360 Degrees, by front touch switches. RS-232 control and software update. Less than 1 degree. Crystal controlled. Crystal controlled. Fully Genlocked. Better than 10 PPM. 19 inch (W), 7 inch (D), 1U (H) rack mountable. 230 VAC, 50/60 Hz, (115VAC, U.S.A.) 10 VA. 2.5 Kg. (5.5 Lbs.) Approx. Power cord. Kramer distribution amplifiers for additional burst or bar outputs. # # # # Studio master genlock to one stable source. Black or Color Bar reference for professional video cameras that need a stable reference. Test and alignment tool for professional video/audio equipment. Color Bar generator as filler for recording in a duplication studio. Page 4.16