DF64 Digital Frame Manual

Size: px

Start display at page:

Download "DF64 Digital Frame Manual"

Noel Lawson
6 years ago
Views:

S Word Int 44.1 48 96 PU Select P ctive ustom Locked S W Int 44.

1 S Word Int PU Select P ctive ustom Locked S W Int PU Select P ctive ustom Locked S Sync S Sync MI Inputs MI Inputs In In Out Out Word Sync Word Sync In 75 In 75 Out Out irewire irewire MI Outputs MI Outputs hassis I hassis I Sync Source Sync Source SP ctivity SP ctivity SP ctivity SP ctivity SP ctivity SP ctivity SP ctivity SP ctivity SP ctivity SP ctivity MI Input OK MI Input OK -631 RM ONTROLLR -631 RM ONTROLLR SIGNL PROSSOR SIGNL PROSSOR SIGNL PROSSOR SIGNL PROSSOR SIGNL PROSSOR SIGNL PROSSOR SIGNL PROSSOR SIGNL PROSSOR SIGNL PROSSOR SIGNL PROSSOR MM-641 MI INTR MM-641 MI INTR 64 igital rame Manual Version 1.0 Part# Publish date: October 1999 Revision Inc. 220 Portage venue Palo lto, Tel: (650) ax: (650) Web Page: In the interest of continued product development, reserves the right to make improvements in this manual and the product it describes at any time, without notice or obligation. System 5, SYSTM 5, PatchNet, emix, uon, R-1, Studio Hub, igital Studio ontroller, S, lear, Gainall, SnapShot, SnapShot utomation, SnapShot Recall and Total utomation are trademarks of Inc.

2 This page intentionally left blank 64 igital rame Manual Version , Inc. Page 2

3 TL O ONTNTS ox Inventory...4 Safety and Precautions...4 Power On Sequence...5 /TUV/UL/S...5 omponent Overview...6 unctional escription...6 pplications...6 Hardware Operation...8 imensions and Weight...8 ront Panel, 631 rame ontroller...9 ront Panel, MM641 MI Interface ard...11 ront Panel, SP661 Signal Processing ard...12 Technical Specifications...13 Performance Specifications...13 nvironmental Requirements...14 Power Requirements...14 Serviceability...14 User Reference...! ookmark not defined. 64 Hookup iagram...! ookmark not defined. 64 igital rame Manual Version , Inc. Page 3

4 ox Inventory The 64 igital rame box contains the following items. escription Part # Qty 64 igital udio rame Power supply, ummy power supply Rackmount Hardware Power ord, I/US, ront Panel lank, Modular * ard, 631 rame ontroller Pack ard, MM641 MI Interface MM641 Pack ard, SP661 Signal Processor * 64 Manual 1 * - Number varies depending on configuration ordered. Safety and Precautions 1) Read Instructions - Read all the safety and operation instructions before operating the 64 igital rame. 2) Heed Warnings ollow all warnings on the 64 and in these operating instructions. 3) Water and Moisture o not use the 64 near water. 4) Heat Locate the 64 away from heat sources. 5) Power Sources onnect the m713/m703 only to a power supply of the type described in these operation instructions or as marked on the 64. 6) Power ord Protection Route power cords so that they are not likely to be walked upon or pinched by items placed on them. 7) Object and Liquid ntry o not drop objects or spill liquids on the 64. 8) amage Requiring Service The 64 should be serviced only by qualified personnel when: a) Objects have fallen, or liquid has spilled into the 64; or b) The 64 does not appear to operate or exhibits a marked change in performance; or, c) The 64 have been dropped or there is damage to a chassis. 9) Servicing o not attempt to service the 64 beyond those means described in this operation manual. ll other servicing should be referred to the Tech Support department. 64 igital rame Manual Version , Inc. Page 4

5 10) use replacement To prevent electric shock and avoid risk of fire, replace fuse only with the same type and rating. 11) To prevent electric shock, do not use the 64 polarized plug with and extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. 12) Grounding or Polarization o not defeat the grounding or polarization of the ) ooling - Ventilation for cooling is provided to the 64 via four rear panel mounted fans. These fans draw cooling air through the chassis from the openings on the front panel. To avoid damage to the unit, do not block the fans or the front panel openings. o not disconnect the fans. THR R NO USR SRVIL PRTS IN TH 64. However, individual cards can be swapped by the user. Power On Sequence /TUV/UL/S It is recommended that the 64 igital rame(s) are powered on after all the other System 5 components have been powered on and the Virtual Mixer has been loaded in all the corresponding igital Pilot computers. The 64 is fully compliant. ocumentation is available from the factory. 64 igital rame Manual Version , Inc. Page 5

6 omponent Overview unctional escription pplications The 64 igital rame is the igital Signal Processing enter of System 5. igital udio is routed to and from the 64 in MI. ontrol of the 64 is provided by a igital Pilot omputer (one per 64,) which in turn communicates with the System 5 ontrol Surface. Thus the 64 is under control of the System 5 system operator. The 64 assembly is a standard 19 rack width and 9RU high. In its role of igital Signal Processing enter for System 5, the 64 performs three functions; Signal I/O Signal Routing and Synchronization Signal Processing There are 3 different types of cards in the 64 that address each of the above functions. The number and type of cards in the 64 are configurable. There are one to four 64 frames per System 5, each of which can contain up to 14 cards. One S253d igital Pilot is required for each 64. Signal I/O MM641 MI Interface ard ll audio I/O is handled by the MM641 MI Interface ard. MI signals input at 24 bit fixed point resolution are converted to 32 bit floating point resolution for distribution over the backplane to other cards (the Signal Processor ards use 40 bit floating point processing internally see below). ach MM641 card can input 224channels and output 224 channels of audio (56 channels per MI port.) The MI cards can also support 64 channel MI if an application requires this. When operating at 96kHz sample rates, each MI port handles 28 audio channels. Signal Routing and Synchronization 631 rame ontroller ard ll patching between I/O, hannels, and usses is done on the Time ivision Multiplexed(TM_ bus and controlled by the 631 rame ontroller ard. The 631 ard also provides a irewire interface to the S253d Pilot omputer. The 64 includes a slot for a backup 631 card, for applications where maximum fault tolerance is required. The 64 typically acts as a Sample Rate Slave in System 5 synchronization, although it can be a Master if desired. The Sync Source section on the 631 front panel allows the user to select between S or Word Sync (slave mode) or Internal Sync (master mode). Once locked to the selected sync source, the 631 distributes a sync clock to the other cards in the 64 frame and outputs a reference clock on its S and Word sync output connectors. The master Sample Rate clock signal for the 64 and all System 5 system components comes from the Studio Hub (SH612), which in turn can be used to synchronize other digital components in the studio. 64 igital rame Manual Version , Inc. Page 6

7 Signal Processing SP661 Signal Processor ard The SP661 Signal Processor card performs all signal processing functions in the 64. This card comprises six nalog evices SHR processors, massive M facilities for transferring audio data, and a RIS PU for management of card functions. The programmable SP architecture on the SP661 card allows it to perform channel processing, mixing, or various other signal processing tasks. 64 igital rame Manual Version , Inc. Page 7

8 5 Hardware Operation imensions and Weight Height: inches Width: 19 inches epth: 17.3 inches Weight: 72lbs (approx) with 9-SP661, 1-631, 2-MM641 cards, and 1-power supply. Weight can vary with configuration ront 17 Side 17 Rear 64 igital rame Manual Version , Inc. Page 8

9 ront Panel, 631 rame ontroller S Sync In S Sync Out (3-pin Lemo emale) S/U formatted sync input. The 64 clocks to the signal at this port when Sync Source is set to S. n XLR female to LMO adapter cable is provided. (3-pin Lemo Male) S/U formatted sync output. This signal is active regardless of the selected sync source. LMO to XLR male adapter cable is provided. S Sync Word In Word Out (N) TTL-level square wave Sync Input. 64 Sample rate is clocked to the signal at this port when Sync Source is set to Word. (N) TTL-level square wave sync output. This signal is active regardless of selected sync source. I 1394 ports (2) (I 1394) High speed communication interface to the S253d Pilot omputer. This interface carries real-time control and metering data between the S253d and the 64. The cable from the S253d can be plugged into either of the two ports. hassis I isplay ach 64 chassis must be assigned a unique I which identifies it among multiple frames in a system. The I is set using a rotary switch located on the ackplane P. The System is shipped with the I switch preset to the proper number, so users will not normally need to access the switch. The switch position must match that of the corresponding igital Pilot computer. In Out Word Sync In Out irewire hassis I 75 Sync Source Ls The top three Ls in the Sync Source section indicate the selected sync source: S, Word, or Internal. The sync source is changed by pressing the select button (a paper clip or similar tool is required) Refer to the System 5 Operation Manual for information on changing the sync source. Sample Rate Ls The bottom six Ls in the Sync Source section indicate the sample rate that is measured by the -631 card. Standard sample rates include 44.1kHz, 48kHz, 96kHz, and the 0.1% pullup and pull-down rates associated with each of these standard rates. If the 631 is locked to a non-standard sample rate, the USTOM L will be lit. Select utton Use this button to manually select the Sync source (and Sample Rate, if Internal Sync is selected) Refer to the System 5 Operation Manual for information on changing the sync source. Sync Source S Word Int PU Select P ctive ustom Locked -631 RM ONTROLLR Locked L ctive L Indicates that the 631card is receiving and locked to the selected sync source. This L must be lit to ensure proper audio operation of the 64.. When lit, Indicates that the 631 is actively controlling the TM bus. In a system with two 631 cards, this L is 64 igital rame Manual Version , Inc. Page 9

10 used to determine which card is ctive and which is on stand-by., Ls Indicate that 5 volt and 3 volt power are present. utton L utton L This button forces a manual reset of the 631 card. Indicates that an error condition has been detected on the 631. It is normal for this L to remain lit for 30 seconds or more after the 64 is powered on. Push this button prior to making a swap of the 631 ard. In a system fitted with two -631 cards, the backup card will take over when the button is pressed on the active card (supported in v2.0). Indicates that 631 is disconnected from the 64 system bus and ready for removal. 64 igital rame Manual Version , Inc. Page 10

11 ront Panel, MM641 MI Interface ard MI In Ports(4) (N) igital audio signal input. ach port can receive 56 or 64 channels of audio at sample rates up to 48kHz, or 28 or 31 channels at 96kHz. MI Inputs MI Out Ports(4) (N) igital audio signal output. ach port can transmit 56 or 64 channels of audio at Sample Rates up to 48kHz, or 28 or 31 channels at 96kHz. MI Outputs MI Input OK Ls Indicate that a MI signal is present at the respective input port(s). flashing L indicates a protocol or sync error on the incoming MI line. Indicates that all channels of audio from the MM641 to the TM bus are muted. MI output channels are muted automatically if the hardware detects a corrupted signal., Ls Indicate that 5 volt and 3 volt power are present. MI Input OK utton This button forces a manual reset of the MM641 card. L Indicates that an error condition has been detected on the MM641 card. It is normal for the L to be lit for 30 seconds or more after the 64 has been powered on. utton L card. Push this button prior to making a swap of the MM641 Indicates that the MM641 card is disconnected from the 64 system bus and ready for removal. MM-641 MI INTR 64 igital rame Manual Version , Inc. Page 11

12 ront Panel, SP661 Signal Processing ard SP ctivity Ls These Ls indicate the level of processing activity on each of the SP661 Sharc processors. The lights glow more brightly as each Sharc increases its processing activity. Indicates that all udio signals from the SP661 to the TM bus are muted., Ls Indicate that 5 volt and 3 volt power are present. utton This button forces a manual reset of the SP661 card. SP ctivity L Indicates that an error condition has been detected on the SP661 card. Is is normal for the L to remain lit for 30 seconds or more after the 64 is powered on utton L Push this button prior to making a swap of the SP661 ard. Indicates that the SP661 card is disconnected from the 64 system bus and ready for removal. SIGNL PROSSOR 64 igital rame Manual Version , Inc. Page 12

13 Technical Specifications Performance Specifications Sync sources: Word Sync In S Sync In Word Sync, S 1 N 1 Lemo 3-pin (adapter to XLR female provided) Internal s: Sample Rate Range (s) Locking to xternal Source: Sync Outputs: Word lock Out S Sync Out MI MI input: MI output: ackplane SP Total Harmonic istortion 44.1, 48, 96 khz +/-20ppm 40,000Hz 48,480Hz (in single speed mode) 80,000Hz 96,960Hz (in double speed mode) S and Word Sync 1 N 1 Lemo 3-pin (adapter to XLR male available) 4 (N) 75ohms, 56 channel (with nominal Sample Rates 40kHz and 48.48kHz) ull 24-bit precision. MI Input OK L per input port 4 (N) 75ohms, 56 channel (with nominal Sample Rates 40kHz and 48.48kHz) ull 24-bit precision. 684-channel pipelined TM bus (32-bit floating point audio data) 342 channels at 80kHz -> 96.96kHz operation 32-bit floating-point audio data format (converted to/from 24-bit 24-bit fixed point on MM641 ard) 40-bit floating-point internal computation 32-bit floating point maintained throughout all internal paths 7.5 GLOPS Peak SP horsepower per 64 rame (using 9 SP661 ards and 2 MM641 ards) 29.8 GLOPS Peak SP horsepower per system (4 64 frames) 0.005% or better, 20Hz ~ 20kHz, -18dS (through any audio path) udio Throughput elay 44 Samples Typical (MI In -> hannel -> Mix us -> Monitor us -> MI Out ) (0.92 s=48khz, 0.46 s=96khz elay remains constant with Q/ilters/ynamics In or Out dditional user-adjustable delay per channel (up to 240 samples) irewire (I1394) 2 ports on 631 front panel. Used for real-time system control and configuration 200Mbps max data rate 64 igital rame Manual Version , Inc. Page 13

14 nvironmental Requirements Operating Temperature: Storage Temperature: Humidity: 0 to 35 degrees elsius (ambient) -10 to 55 degrees elesius 0 to 90% non-condensing Power Requirements 90 to 254 Volts (rms), 50/60Hz, 400 Watts Max Maximum inrush current at power-on: 40 mps Specifications subject to change without notice. Serviceability ll active modules (ards, Power supplies) can be inserted or removed with power on. Redundant Power supply available. Redundant SP and rame ontroller ards supported in v igital rame Manual Version , Inc. Page 14

Installation Guide. Document Revision: 1.4 Part Number: Release Date: August, 2003

Installation Guide. Document Revision: 1.4 Part Number: Release Date: August, 2003 Installation Guide ocument Revision: 1.4 Part Number: 840-08472-03 Release ate: ugust, 2003 uphonix, Inc. 220 Portage ve. Palo lto, alifornia 94306 Phone: 650-855-0400 ax: 650-855-0410 Web: http://www.euphonix.com