Digital Matrix Switcher (Scan converter output board) FDX-64

Transcription

1 RoHS igital Matrix Switcher ( output board) FX-64 The IK FX series represent a new level of matrix switching for V systems. The FX series combine the simplicity and reliability of a fixed I/O matrix switcher with the convenience and flexibility of a modular matrix switcher. The FX accepts any combination of available HMI / VI, HaseT, or fiber optic extension input / output boards. output boards are also available, and those scan converter output boards enable to switch video signals which have different resolutions and synchronization timing seamlessly. Input and output boards are available in 4-input, 4-output, providing various I/O size combinations with sizes from 4x4 to 64x64, depending on the FX frame selected. The FX series also supports HP, and it is ideal for a wide range of applications that require routing of high-resolution digital video signals. The FX series also have RS-232 and LN ports for external device control. Specification Input Output Function Instant lert output External control Item HMI / VI HaseT Optical extension HMI / VI HaseT Optical extension Serial control port LN control port MU-1616 (option) Power Power consumption (*19) imensions Weight (*19) Temperature Humidity onnector onnector onnector onnector escription Up to 64 inputs - 4 inputs per board - ny combination of input boards can be install up to 16 boards and 64 inputs Up to 32 or 64 outputs - 4 outputs per board (without scaler) - 2 outputs per board (with scaler) - ny combination of output boards can be install up to 16 boards and 64 outputs spect Ratio ontrol, Seamless Switching (*16), Picture adjustment (brightness, contrast, display position, display size), Motion adaptive I/P conversion udio breakaway enables independent audio and video switching - udio unit MU-1616 is required (optional) Startup memory Preset memory (32 settings and startup settings) Last memory nti-snow (*17) onnection Reset (*18) Front panel security lockout RS232 transmission (HaseT / Optical output slot boards) ustomizable input / output numbers by 4 ports or 2 ports input / output slot boards Input, output, and PU boards can be exchanged without taking off the unit from rack mount Redundant power supply unit (optional) 1 port / Power unit monitoring, Fan unit monitoring 1 terminal block 2-pin 1 port / RS male 9-pin -Sub 1 port / 10ase-T (uto Negotiation), 100ase- (uto Negotiation), uto MI/MI-X 1 RJ-45 1 port 1 female 25-pin -Sub V ± 10%, 50 Hz / 60 Hz ± 3 Hz HMI / VI input / output Max. configuration: bout 466 Watts HaseT input / output Max. configuration: bout 852 Watts Fiber optic extension input / output Max. configuration: bout 1039 Watts HMI / VI input / scan converter output Max. configuration: bout 446 Watts HaseT input / scan converter output Max. configuration: bout 802 Watts Fiber optic extension input / scan converter output Max. configuration: bout 869 Watts (W) x (H) x () (approx.) / 430 (W) x 399 (H) x 350 () mm (EI rack 5U, not including projections) HMI / VI input / output Max. configuration: bout lbs. approx. / 25.3 kg HaseT input / output Max. configuration: bout lbs. approx. / 29.9 kg Fiber optic extension input / output Max. configuration: bout lbs. / 35.7 kg HMI / VI input / scan converter output Max. configuration: bout lbs. / 27.4 kg HaseT input / scan converter output Max. configuration: bout lbs. / 30.3 kg Fiber optic extension input / scan converter output Max. configuration: bout lbs. / 36.4 kg Operating: 32 F to 104 F / 0 to +40 Storage: -4 F to +176 F / -20 to +80 Operating/ Storage: 20 % to 90 % (Non ondensing) Input oard Specification HMI / VI input board 4 inputs / HMI eep olor (*1) / VI 1.0 / HP TMS single link - TMS clock: 25 MHz to 225 MHz - ot clock: 25 MHz to 165 MHz onnector 4 female 29-pin VI-I *nalog signals cannot input VG to QWXG * WUXG / QWXG only support Reduced lanking EI emulation, igital cable EQ 4 inputs / Multi-channel linear PM up to 8 channels udio - Sampling frequency: 32 khz to 192 khz onnector 4 female 29-pin VI-I Maximum distance From 33 ft. (approx.) /10 m up to 99 ft. (approx.) / 30 m (*2) HaseT input board 4 inputs / HaseT / HMI eep olor (*1) / VI 1.0 / HP 1.4 (*3) - TMS single link - TMS clock: 25 MHz to 225 MHz - ot clock: 25 MHz to 165 MHz onnector 4 RJ-45 (*4) VG to QWXG * WUXG / QWXG only support Reduced lanking EI emulation udio 4 inputs / HaseT / Multi-channel linear PM up to 8 channels ll specifications and drawings are subject to change without notice. Please do not use the supplied adapter and power supply cable for other products. The terms HMI and HMI High-efinition Multimedia Interface, and the HMI Logo are trademarks or registered trademarks of HMI Licensing, LL in the United States and other countries. PJLink is a trademark in Japan, the United States, and other countries/regions. HaseT and the HaseT lliance Logo are trademarks of the HaseT lliance. The terms nti-snow and onnection Reset are registered trademarks of IK orporation in Japan ll other company and product names mentioned in this document are either IK orporation FX-64

2 - Sampling frequency: 32 khz to 192 khz onnector 4 RJ-45 (*4) Twisted pair cables at6 UTP/STP straight cable, at5e UTP/STP straight cable (*5) Maximum distance Up to 330ft (approx.) / 100 m(*6) Fiber optic extension input board (*7) udio Fiber optic cable 4 inputs / Optical signals for extension / HMI (*8) / VI 1.0 / HP TMS single link - TMS clock: 25 MHz to 225 MHz onnector 4 SFP modules (2 L connectors per SFP module) VG / SVG / XG / WXG (1280x768) / WXG (1280x800) / Quad-VG / SXG / WXG (1360x768) / WXG (1366x768) /SXG+ / WXG+ / WXG++ / UXG/WSXG+/WUXG * WUXG only supports VI signal and Reduced lanking EI emulation 4 inputs / Optical signals for extension / Multi-channel linear PM up to 8 channels - Sampling frequency: 32 khz to 192 khz onnector 4 SFP modules (2 L connectors per SFP module) Suitable cable uplex fiber cable, SFP module (2 L connectors) (*9) SFP for Multimode: P (recommended) Polishing (*10) SFP for Singlemode: UP (recommended), SP supported * P is not supported Maximum distance (*11) Output oard Specification HMI / VI output board 4 outputs / HMI eep olor (*1) / VI 1.0 / HP TMS single link - TMS clock: 25 MHz to 225 MHz - ot clock: 25 MHz to 165 MHz onnector 4 female 29-pin VI-I *nalog signals cannot input VG to QWXG * WUXG / QWXG only support Reduced lanking igital cable EQ 4 outputs / Multi-channel linear PM up to 8 channels udio - Sampling frequency: 32 khz to 192 khz onnector 4 female 29-pin VI-I Maximum distance From 33 ft. (approx.) /10 m up to 131 ft. (approx.) / 40 m (*2) HaseT output board 4 outputs / HaseT / HMI eep olor (*1) / VI 1.0 / HP 1.4 (*12) - TMS single link - TMS clock: 25 MHz to 225 MHz - ot clock: 25 MHz to 165 MHz onnector 4 RJ-45 (*4) VG to QWXG * WUXG / QWXG only support Reduced lanking 4 outputs / HaseT / Multi-channel linear PM up to 8 channels udio - Sampling frequency: 32 khz to 192 khz onnector 4 RJ-45 (*4) Twisted pair cables at6 UTP/STP straight cable, at5e UTP/STP straight cable (*5) Maximum distance 330 ft. (approx.) / 100 m (*6) Fiber optic extension output board (*7) udio Fiber optic cable 4 oututs / Optical signals for extension / HMI (*8) / VI 1.0 / HP TMS single link - TMS clock: 25 MHz to 225 MHz onnector 4 SFP modules (2 L connectors per SFP module) VG / SVG / XG / WXG (1280x768) / WXG (1280x800) / Quad-VG / SXG / WXG (1360x768) / WXG (1366x768) /SXG+ / WXG+ / WXG++ / UXG/WSXG+/WUXG * WUXG only supports VI signal and Reduced lanking 4 outputs / Optical signals for extension / Multi-channel linear PM up to 8 channels - Sampling frequency: 32 khz to 192 khz onnector 4 SFP modules (2 L connectors per SFP module) Suitable cable uplex fiber cable, SFP module (2 L connectors) (*9) SFP for Multimode: P (recommended) Polishing (*10) SFP for Singlemode: UP (recommended), SP supported * P is not supported Maximum distance (*11) HMI / VI scan converter output board onnector 2 outputs (*13) / HMI eep olor (*14) / VI 1.0 / HP TMS single link - TMS clock: 25 MHz to 225 MHz 2 female 29-pin VI-I *nalog signals cannot output (*15) VG / SVG / XG / WXG (1280x768) / WXG (1280x800) / Quad-VG / SXG / WXG (1360x768) / WXG (1366x768) / SXG+ / WXG+ / WXG++ / UXG / WSXG+ / VES1080 / WUXG / QWXG ll specifications and drawings are subject to change without notice. Please do not use the supplied adapter and power supply cable for other products. The terms HMI and HMI High-efinition Multimedia Interface, and the HMI Logo are trademarks or registered trademarks of HMI Licensing, LL in the United States and other countries. PJLink is a trademark in Japan, the United States, and other countries/regions. HaseT and the HaseT lliance Logo are trademarks of the HaseT lliance. The terms nti-snow and onnection Reset are registered trademarks of IK orporation in Japan ll other company and product names mentioned in this document are either IK orporation FX-64

3 * VES1080 / WUXG / QWXG are output as Reduced lanking igital cable EQ 2 outputs / Multi-channel linear PM up to 8 channels udio - Sampling frequency: 32 khz to 192 khz onnector 2 female 29-pin VI-I Maximum distance (*11) From 33 ft. (approx.) /10 m up to 131 ft. (approx.) / 40 m (*2) HaseT scan converter output board 2 outputs (*13) / HaseT / HMI eep olor (*14) / VI 1.0 / HP 1.4 (*12) - TMS single link - TMS clock: 25 MHz to 225 MHz onnector 2 RJ-45 (*4) (*15) VG / SVG / XG / WXG (1280x768) / WXG (1280x800) / Quad-VG / SXG / WXG (1360x768) / WXG (1366x768) / SXG+ / WXG+ / WXG++ / UXG / WSXG+ / VES1080 / WUXG / QWXG * VES1080 / WUXG / QWXG are output as Reduced lanking 2 outputs / HaseT / Multi-channel linear PM up to 8 channels - Sampling frequency: 32 khz to 192 khz udio onnector 2 RJ-45 (*4) Twisted pair cables at6 UTP/STP straight cable, at5e UTP/STP straight cable (*5) Maximum distance 330 ft. (approx.) / 100 m (*6) Fiber optic extension output board (*7) udio Fiber optic cable 2 outputs (*13) / Optical signals for extension / HMI (*8) / VI 1.0 / HP TMS single link - TMS clock: 25 MHz to 225 MHz onnector 2 SFP modules (2 L connectors per SFP module) (*15) VG / SVG / XG / WXG (1280x768) / WXG (1280x800) / Quad-VG / SXG / WXG (1360x768) / WXG (1366x768) / SXG+ / WXG+ / WXG++ / UXG / WSXG+ / VES1080 / WUXG * VES1080 / WUXG are output as Reduced lanking 2 outputs / Optical signals for extension / Multi-channel linear PM up to 8 channels - Sampling frequency: 32 khz to 192 khz onnector 2 SFP modules (2 L connectors per SFP module) Suitable cable uplex fiber cable, SFP module (2 L connectors) (*9) SFP for Multimode: P (recommended) Polishing (*10) SFP for Singlemode: UP (recommended), SP supported * P is not supported Maximum distance (*11) SFP Specification Item Multimode fiber Singlemode fiber onnector 2 L connectors (uplex) Wave length 850 nm (Oxide VSEL Laser (*)) 1310 nm (Fabry-Perot laser (*)) Maximum distance OM3: 985 ft. (approx.) / 300 m OS1: 2.92 miles (approx.) / 4.7 km OM4: 3,280 ft. (approx.) / 1 km Max. input power 0 dm +0.5 dm Optical power level Input Over -13 dm Over -18 dm Output -9 dm to -2.5 dm -8.4 dm to -3 dm *1 This product supports 36 bits/pixel eep color (12 bit/component). It does not support x.v.olor, 3, R, HE, and E *2 Transmission distance depends on connected equipment. The information above is maximum transmission distance when a cable made by IK (WG24) is used and signals (1080p 60 Hz 24bit/pixel (8bit/component)) are transmitted (both inputs and outputs of this product). When connected equipment is not matched to this product or other makers' cables are used, video signal can be unstable or video signals cannot be output, even though transmission distance is within the information above. *3 It does not support VI signals with HP. If you need to extend VI signals with HP, please use The IK H-T100 as a transmitter. *4 RJ-45 connector is only for extending video, audio, power for a receiver, control signals using a at5e/at6 twisted pair cable. IK receivers are required. Please do not connect LN devices to this connector. *5 Wiring is straight T568 or T568. If exceeding 50 m, it is recommended to use a at6 cable. *6 If connected to a device whose status is significantly bad, video signal can be unstable or cannot be output. heck the operation beforehand or contact us. *7 The IK OPF-H1000- must be connected for optical extension input and output cards. *8 It does not support eep olor, xvy, Lip Sync, 3, R, HE, and E *9 Please refer to SFP Specification. *10 It is possible to connect without using the recommended polishing method, but that may cause a change of extension distance ability due to an increase in return loss. *11 Max. Extension distance is measured under following condition; using fiber of recommended polishing method, without connection at the transmission path and not exceeding the value of allowable bending radius. *12 It does not support VI signals with HP. If you need to extend VI signals with HP, please use The IK H-R100 as a receiver. *13 output board uses 2 of 4 channels. hannel numbers are assigned to each connector consecutively. hannel number for unused channel is reserved but not be able to set. *14 This product supports 30 bits/pixel eep color (10 bit/component). It does not support x.v.olor, 3, R, HE, and E * p and 1080i are 50 Hz / Hz. *16 Seamless switching with a black frame. *17 The nti-snow function can automatically recover from snow-noise that is a specific symptom of digital signals having HP. Mainly, this snow-noise occurs during system startup. Therefore, this function does not work in case of snow-noise has already occurred before input the signal to IK switchers or bad quality signal transmission. *18 The onnection Reset function can fix these problems without physical cable manipulations. This function can work only in this product's output port, which sometimes will not take effect if another device is between output of this product and display device. *19 Please contact our Sales ivision for power consumption information of each configuration. ll specifications and drawings are subject to change without notice. Please do not use the supplied adapter and power supply cable for other products. The terms HMI and HMI High-efinition Multimedia Interface, and the HMI Logo are trademarks or registered trademarks of HMI Licensing, LL in the United States and other countries. PJLink is a trademark in Japan, the United States, and other countries/regions. HaseT and the HaseT lliance Logo are trademarks of the HaseT lliance. The terms nti-snow and onnection Reset are registered trademarks of IK orporation in Japan ll other company and product names mentioned in this document are either IK orporation FX-64

4 V& VIEO UIO V OPTIL OPTIL Front & Rear Panel IGITL MTRIX SWITHER FX-64 OFF LL PRESET LO SWITHING MOE MENU /SET SET ES RS-232 LN REKER UPTE 2 UPTE 1 LRM 1 ~ 4 VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) 1 ~ 4 5 ~ 8 VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) 5 ~ 8 9 ~12 VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) 9 ~12 13~16 VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) 13~16 17~20 VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) 17~20 21~24 VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) 21~24 25~28 HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT 25~28 29~32 HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT 29~32 33~36 HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT 33~36 37~40 HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT 37~40 41~44 HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT 41~44 45~48 HaseT HaseT HaseT HaseT HaseT HaseT 45~48 49~52 OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL 49~52 53~56 OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL 53~56 57~60 OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL 57~60 61~64 OPTIL OPTIL OPTIL OPTIL 61~64 ll specifications and drawings are subject to change without notice. Please do not use the supplied adapter and power supply cable for other products. The terms HMI and HMI High-efinition Multimedia Interface, and the HMI Logo are trademarks or registered trademarks of HMI Licensing, LL in the United States and other countries. PJLink is a trademark in Japan, the United States, and other countries/regions. HaseT and the HaseT lliance Logo are trademarks of the HaseT lliance. The terms nti-snow and onnection Reset are registered trademarks of IK orporation in Japan ll other company and product names mentioned in this document are either IK orporation FX-64

5 RoHS iagram igital Matrix Switcher ( output board) FX-64 iagram and Features Up to 64 inputs / 4 slot boards FX-64 Up to 64 outputs / 4 slot boards igital output slot board 4Outputs / 1 slot board Output EQ igital / udio HMI VI Up to 131 ft. (approx.) / 40 m HaseT output slot board Outputs / 1 slot board 4 igital / udio HaseT igital / udio HMI VI igital / udio HaseT igital video / udio Optical fiber Up to 99 ft. (approx.) / 30 m Up to 330 ft. (approx.) / 100 m igital input slot board 4Inputs / 1 slot board Input EQ Receiver HaseT input slot board 4Inputs / 1 slot board Receiver 4 EI emulation EI emulation Optical input slot board Inputs / 1 slot board Receiver EI emulation udio Matrix Switch 64IN- 64OUT Optical output slot board 4 Outputs / 1 slot board igital scan converter output slot board 2 Outputs / 1 slot board HaseT scan converter output slot board 2 Output EQ Outputs / 1 slot board Up to 330 ft. (approx.) / 100 m igital video / udio Optical fiber Up to 131 ft. (approx.) / 40 m igital / udio HMI VI igital / udio HaseT Optical scan converter output slot board 2 Outputs / 1 slot board Up to 330 ft. (approx.) / 100 m igital video / udio Optical fiber * Input slot board can expand in 4-input unit * Output slot board can expand in 4-input unit * output slot board can expand in 4-input unit Ordering code FX-64 32T16MM8SM8-24T24MM8SM : igital input / output slot board S : igital scan converter output slot board T : HaseT input / output slot board TS : HaseT scan converter output slot board MM : Multimode fiber optical input / output slot board MMS : Multimode fiber optical scan converter output slot board SM : Singlemode fiber optical input / output slot board SMS : Singlemode fiber optical scan converter output slot board LS : Singlemode fiber (6.21 miles / 10 km) optical input / output slot board LSS : Singlemode fiber (6.21 miles / 10 km) optical scan converter output slot board 1 : The number of digital inputs 2 : The number of HaseT inputs 3 : The number of multimode optical inputs 4 : The number of singlemode optical inputs 5 : The number of digital outputs 6 : The number of HaseT outputs 7 : The number of multimode optical outputs 8 : The number of singlemode optical outputs Ex.) 32 inputs 48 outputs: 16 digital inputs / 8 HaseT inputs / 8 singlemode optical inputs 4 digital outputs / 4 digital scan converter outputs / 32 HaseT outputs / 8 singlemode optical outputs (10 km) FX-64 16T8SM8-4S4T32LS8 ll specifications and drawings are subject to change without notice. Please do not use the supplied adapter and power supply cable for other products. The terms HMI and HMI High-efinition Multimedia Interface, and the HMI Logo are trademarks or registered trademarks of HMI Licensing, LL in the United States and other countries. PJLink is a trademark in Japan, the United States, and other countries/regions. HaseT and the HaseT lliance Logo are trademarks of the HaseT lliance. The terms nti-snow and onnection Reset are registered trademarks of IK orporation in Japan ll other company and product names mentioned in this document are either IK orporation FX-64

6 [Features] *1 *2 - Up to QWXG (R) or 1080p - 4 port slot board type input and output board - uilt-in igital able EQ Input: From 33 ft. / 10 m up to 99 ft. / 30 m (approx.) Output: From 33 ft. / 10 m up to 131 ft. / 40 m (approx.) - Extension distance using a at6 twisted pair cable (HaseT input and output board) Input: Up to 330 ft. / 100 m (approx.) Output: Up to 330 ft. / 100 m (approx.) - Extension distance using fiber optic (Fiber optic extension input and output board) (Optional: 6.21 miles / 10 km) - nti-snow - ustomizable input / output numbers by 4 ports or 2 ports input / output slot boards - Unification of the output resolution (scan converter output slot board) ontrol input - RS-232, LN - onnection reset - Instant lert Function for power supply and Fan units - Input, output, and PU boards can be exchanged without taking off the unit from rack mount - EI emulation - udio breakaway enables independent audio and video switching - Preset memory, Last memory, and Startup memory - Front panel security lockout - RS-232 transmission (HaseT / Optical output slot boards) - Redundant power supply (option) * 1. (R) = Reduced lanking * 2. Max. resolution for fiber optic extension input and output board are WUXG (R) / udio input VI RS-232 LN REKER UPTE 1 VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) / udio output VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) HMI/ VI lank period will be happen when FX switches input cannel V LRM UPTE 2 esktop P IN5 IN1 VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) HMI/VI HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT lu-ray Player HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT L Monitor HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL FX-64 / udio input lank period become shorten VI RS-232 LN V REKER LRM UPTE 2 UPTE 1 / udio output esktop P VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) HMI/ VI VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) IN5 IN1 VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) HMI/VI HMI/VI VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT lu-ray Player HaseT HaseT HaseT HaseT HaseT HaseT HaseT igital frame synchronizer HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT L Monitor HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL FX-64 / udio input lank period become shorten VI RS-232 LN UPTE 2 / udio output V REKER LRM UPTE 1 esktop P VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) IN5 IN1 HMI/ VI VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) HMI/VI VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) VI-(HMI) HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT lu-ray Player HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT igital frame synchronizer L Monitor HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT HaseT OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL OPTIL FX-64 uilt-in digital frame synchronizer ll specifications and drawings are subject to change without notice. Please do not use the supplied adapter and power supply cable for other products. The terms HMI and HMI High-efinition Multimedia Interface, and the HMI Logo are trademarks or registered trademarks of HMI Licensing, LL in the United States and other countries. PJLink is a trademark in Japan, the United States, and other countries/regions. HaseT and the HaseT lliance Logo are trademarks of the HaseT lliance. The terms nti-snow and onnection Reset are registered trademarks of IK orporation in Japan ll other company and product names mentioned in this document are either IK orporation FX-64