Breckenridge AV UCCS

Transcription

1 Eleven Tech Group 2717 Sunnywood Ave Woodland Park, Colorado Phone: Breckenridge AV UCCS Eleven Tech Group May 2017

2 AMP-1200 Series Single-Channel Modular Power Amplifiers, 200W, 70V or 100V > > ENERGY STAR certified power amplifier > > Ultra-efficient space-saving design > > Choice of 70V or 100V output > > Single channel, 200 Watts > > Half-width, 1 RU form factor > > Surface or rack mountable > > Gangable with other Crestron modular amps > > All mounting and ganging hardware included > > High-density stackable > > Convection cooling no mechanical fans > > Comprehensive fault and speaker protection > > Clip limiter > > Low noise, low distortion, high headroom > > Low power consumption > > Automatic low-power standby > > Balanced and unbalanced inputs > > Detachable terminal blocks for easy servicing > > Front panel level adjustment with tamper-preventive magnetic cover > > Front panel power/standby, fault, and signal/clip indicators > > Internal universal V power supply Finally, a space saving, energy efficient, commercial grade, professional performance amplifier solution that s totally configurable yet remarkably straightforward. Whether you need a single-channel amp that mounts on a wall or under a table, or a multichannel rack mount amp with multiple output types and power levels, Crestron modular amps are astoundingly simple to specify and install in any configuration you require. All-Inclusive Modular Design Crestron modular amplifiers are offered in a range of output power levels, with single and dual-channel models available, and with options to address either Lo-Z (4/8 Ω) or Hi-Z (70 or 100 Volt) speaker types. (AMP-1200 models support Hi-Z only.) Each model is housed in either a quarter- or half-width rack-mountable form factor that can be installed individually or ganged together in a single rack space. (AMP-1200 models are half-width.) Every model ships complete with all the hardware required for installation of the unit by itself or in combination with any other unit(s). Rack and surface mount kits are included, so there are no other mounting accessories or rack shelves to purchase. Whether mounting in a rack, attaching to a flat surface, or simply placing on a shelf, it s easy to combine multiple units into a single assembly. Just remove a couple of screws, slide the side panel off and attach it to the next unit, slide the two units together, and reinstall the screws. The complete multichannel amp assembly is sturdy and solid, with the look of a full-space unit. Attach the appropriate sized rack ears or surface brackets and it s ready to mount. 70V or 100V Output The AMP-1200 is a single channel amplifier, conservatively rated at 200 Watts, with a Hi-Z output to drive a distributed speaker system. Two models are offered: The AMP has a 70 Volt output, and the AMP has a 100 Volt output. Output wiring is facilitated using a detachable terminal block. Balanced and unbalanced inputs are provided for connection to a mono or stereo (summed) source via a detachable terminal block or RCA connectors. Solid & Efficient Performance All Crestron modular amps are engineered to deliver exceptional performance and reliability with low distortion, low noise, and high power headroom. Advanced Class D technology maximizes efficiency to reduce power consumption and heat dissipation. An internal universal power supply with power factor correction ensures consistent performance at varying line voltages. Convection Cooled The ultra-efficient design of the AMP-1200 ensures cool running operation without the use of internal fans. This means there s no fan noise to disturb nearby listeners and no moving parts to break down. Cool operation also helps to ensure long term reliability. The AMP-1200 is high-density stackable with other Crestron modular amps, allowing multiple units to be installed vertically in an equipment rack without extra ventilation space in between. Fully Protected The AMP-1200 features comprehensive protection against overheating, shorted or overloaded speaker lines, excessive input signals, and other faults. Built-in clip limiting prevents extreme output signals and distortion that can damage the speakers or amplifier. In the case of a shorted speaker line or overheating condition, the output mutes automatically until the fault condition is resolved. In the event of a prolonged fault, such as an internal component failure, the output mutes instantly and the amplifier shuts down.

3 AMP-1200 Single-Channel Modular Power Amplifiers, 200W Front View Rear View ENERGY STAR Certified Its energy-efficient design enables the AMP-1200 to meet demanding ENERGY STAR requirements. Crestron modular amps, like the AMP-1200, allow organizations to fulfill their green initiatives without compromising on audio performance. In addition to its high efficiency under operation, the AMP-1200 draws no added inrush current during power-up, thereby reducing AC circuit requirements and allowing multiple units to be connected to a single switched circuit. To reduce energy usage further, the AMP-1200 automatically enters a low-power standby state if no input signal is detected for 20 minutes, and returns to full operation within a half-second the instant an input signal is detected. SPECIFICATIONS Audio Input Signal Types: Balanced or unbalanced analog line-level Output Power, AMP : Volts nominal Output Power, AMP : Volts nominal Frequency Response: 200 Hz to 20 khz ±0.5 db High-Pass Filter: Hz, 12 db per octave THD+N: <0.1% [1] S/N Ratio: >100 dba, 20 Hz to 20 khz, balanced Input Sensitivity: 1.29 Vrms, +4 dbu balanced; Vrms, -10 dbv unbalanced; For full rated output power Go To Sleep Time: 20 minutes with no signal present Wake Time: 0.5 second typical Wake Threshold: 5 to 20 mv typical Protection: Clip limiter, over current, under voltage, over temperature, DC offset, extreme high frequency Connectors SPEAKER OUT: (1) 2-pin 7.62 mm reversed gender 20A detachable terminal block; Power amplifier output; Wire Size: Terminals accept up to 12 AWG (3.31 mm 2 ); Note: Output is direct-coupled, not transformer isolated AUDIO IN L/R (unbalanced): (2) RCA female; Unbalanced line-level audio inputs (summed); Maximum Input Level: 2.24 Vrms, +7 dbv (+9.2 dbu) AUDIO IN L/R (balanced): (1) 5-pin 3.5 mm detachable terminal block; Balanced line-level audio inputs (summed); Maximum Input Level: 7.75 Vrms, +20 dbu; Input Impedance: 20k Ohms G: (1) 6-32 screw; Chassis ground lug V~1A 50/60 Hz: (1) IEC C14 main power inlet; Mates with removable power cord, included Controls & Indicators PWR: (1) Bi-color green/amber LED, indicates operating power supplied from AC line power, turns green while operating and amber when in standby FAULT: (1) Red LED; indicates an over-temperature or over-current fault SIGNAL: (1) Bi-color green/red LED, green indicates input signal presence and red indicates input signal clipping Input Level: (1) Screwdriver-adjustable rotary control, adjusts the input attenuation level, tamper-preventive magnetic cover included Power Main Power: Volts AC, 50/60 Hz Power Consumption: 45 Watts, all channels driven at 1/8th output power; 16 Watts, idle; <0.5 Watt, standby (sleep) Environmental Temperature: 41 to 104 F (5 to 40 C) Humidity: 10% to 90% RH (non-condensing) Construction Chassis: Metal, convection-cooled (fanless), vented front and rear Front Panel: Metal, black finish with polycarbonate label overlay Mounting: Freestanding, surface-mount, or 1/2-width 1 RU 19-inch rackmountable; gangable with other Crestron modular AMP series products (adhesive feet, surface mounting kit, ganging kit, and rack mounting kit included) Dimensions Height: 1.74 in (45 cm) without feet; 1.82 in (47 mm) with surface kit Width: 8.65 in (220 mm); 9.75 in (248 mm) with surface kit; in (483 mm) with rack kit Depth: in (266 mm)

4 AMP-1200 Single-Channel Modular Power Amplifiers, 200W Two 1/2-width units ganged together (ganging kit and rack mounting kit included) One 1/2-width and one 1/4-width units ganged together (ganging kit and rack mounting kit included) Single 1/2-width unit with surface mounting kit (included) Weight 4.2 lb (1.9 kg) without mounting kits 4.5 lb (2.0 kg) maximum with surface or rack kit Compliance ENERGY STAR, ErP (1275/2008/EC), UL 60065, FCC Class A commercial use MODELS & ACCESSORIES Available Models AMP : Single-Channel Modular Power Amplifier, 200W, 70V AMP : Single-Channel Modular Power Amplifier, 200W, 100V Available Accessories CBL Series: Crestron Certified Interface Cables AUD-EXT: Audio over CAT5 Extenders Notes: 1. AMP measured at full power, AMP measured -3 db below full power. This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at or by calling The specific patents that cover Crestron products are listed online at: patents.crestron.com. Certain Crestron products contain open source software. For specific information, please visit Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. ENERGY STAR and the ENERGY STAR logo are either trademarks or registered trademarks of the United States Environmental Protection Agency in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice Crestron Electronics, Inc.

5 AMP-1200 Single-Channel Modular Power Amplifiers, 200W DIMENSIONAL DIAGRAM Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ Tel: / Fax: All brand names, product names and trademarks are the property of their respective owners Crestron Electronics, Inc. Specifications subject to change without notice. Revised 02/27/17

6 CLW-DIMEX-P Cameo Wireless In-Wall Dimmer, 120V > > Provides forward-phase dimming > > Field-replaceable, engravable buttons > > Available in all designer colors > > infinet EX robust communication > > Models popular Cameo style > > Configurable up to 4 buttons > > Matching aesthetics across entire line > > Supports remote dimmers and switches (CLW-SLVU-P) > > Screw-clamp connectors for easier & improved installation > > Stylish bargraph provides real-time status feedback > > CEC Title Compliant The CLW-DIMEX-P is a Cameo in-wall dimmer which features fieldreplaceable, engravable buttons. Along with the entire line of Cameo products, it can be configured with various button layouts and designer colors, making the CLW-DIMEX-P more versatile and affordable than previous generations of in-wall dimmers. Its streamlined design matches the entire line of Cameo dimmers, switches and keypads, making it a great addition to new or retrofit installations. In addition to its attractive look and feel, infinet EX communication technology brings proven reliability to the CLW-DIMEX-P. Field-Replaceable Button Faces Like their cousin Cameo keypads, the buttons on the CLW-DIMEX-P can be swapped in the field, making it easy to change engraving or color after installation. The new rocker controller brings a familiar user interface to the Crestron in-wall dimmer, while the versatility of up to four buttons takes advantage of prime single-gang wall box real estate. Use buttons to control in-room audio or lamps in addition to any other light connected to the system. The comprehensive list of designer colors blends the CLW-DIMEX- P into virtually any décor and style, suiting even the most exquisite space. Integrated Keypad Because the CLW-DIMEX-P is attached to the Crestron network, it can also function as a keypad, sending commands to trigger whole-room lighting scenes or distributed audio functions. Supporting up to four buttons, the in-wall dimmer serves as a great user control interface in any Crestron system. Its single-gang form factor maximizes control capability in a small space while increasing the opportunity for Crestron control in every room. infinet EX Ultra-reliable infinet EX wireless technology provides steadfast 2-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infinet EX device functions as an expander, passing command signals through to every other infinet EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption. [1] The CLW-DIMEX-P communicates with a Crestron control system via an infinet EX Wireless Gateway (model CEN-RFGW-EX, DIN-AP3MEX, or MC3 [2] ). Up to 100 infinet EX devices, including Cameo Wireless Keypads and In-Wall Switches [2], may coexist on a single wireless network, and every device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths [1].

7 CLW-DIMEX-P Cameo Wireless In-Wall Dimmer, 120V Streamlined Installation In addition to field-replaceable buttons, the CLW-DIMEX-P features screwclamp connectors for simplified wiring while reducing installation time and material costs. So slim, the Cameo line can be installed in standard gang boxes making them the perfect choice for both new and retrofit projects. Remote Dimmer The CLW-DIMEX-P supports dimming control of the same lights from more than one location. Easily replace existing dimmers and switches wired in a traditional three- or four-way circuit with dim control from every location, or design new projects to accommodate remote dimmers wherever desired. The CLW-SLVU-P remote dimmer simply connects to the traveler wire and dims the load attached to the CLW-DIMEX-P. SPECIFICATIONS Load Ratings Incandescent/Tungsten Halogen: 750 Watts [3] Magnetic Low Voltage: 750VA/750 Watts [3] Minimum Load: 25 Watts (with dedicated neutral connected); 50 Watts (no dedicated neutral) Power Requirements 120 Volts AC, 60Hz, line power Controls Button 1-4: Configurable for 1 to 4 single-action pushbuttons, programmable via control system Dimming Ramp Rate: 5 seconds (default), software adjustable 0.01 to 10 seconds Preset Fade Time: 2 seconds (default), software adjustable 0.01 to 120 seconds LED Indicator Feedback: (7) White LEDs Bargraph: (1) 7 segment bargraph display utilizing the 7 feedback LEDs Wireless RF Transceiver: infinet EX 2-way RF, 2.4 GHz ISM Channels (2400 to MHz), default channel 15; IEEE compliant Range (typical): 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s); subject to site-specific conditions and individual device capabilities [1] Gateway: Requires an infinet EX gateway [2] Connections Hot: (1) AWG,screw terminal, brass, line power input Remote: (1) AWG, screw terminal, blue, remote Load: (1) AWG, screw terminal, red, load output Neutral: (1) AWG, screw terminal, silver, neutral [4] Ground: (1) 18 AWG Class 1 flying lead, green, ground (wire nut included) Environmental Temperature: 32 to 104 F (0 to 40 C) Humidity: 10% to 90% RH (non-condensing) Enclosure 1-gang mountable in a 3-1/2 inch deep electrical box; Requires decorator style faceplate (not included) Dimensions Height: 4.13 in (105 mm) Width: 1.75 in (45 mm) Depth: 1.75 in (45 mm) Weight 5 oz (142 g) Standards & Certifications UL Listed CEC Title Compliant MODELS & ACCESSORIES Available Models CLW-DIMEX-P-A-S: Cameo Wireless In-Wall Dimmer, 120V, Almond Smooth CLW-DIMEX-P-A-T: Cameo Wireless In-Wall Dimmer, 120V, Almond Textured CLW-DIMEX-P-B-S: Cameo Wireless In-Wall Dimmer, 120V, Black Smooth CLW-DIMEX-P-B-T: Cameo Wireless In-Wall Dimmer, 120V, Black Textured CLW-DIMEX-P-BRN-S: Cameo Wireless In-Wall Dimmer, 120V, Brown Smooth CLW-DIMEX-P-DA-S: Cameo Wireless In-Wall Dimmer, 120V, Dark Almond Smooth CLW-DIMEX-P-DSK-T: Cameo Wireless In-Wall Dimmer, 120V, Dusk Textured CLW-DIMEX-P-GRY-S: Cameo Wireless In-Wall Dimmer, 120V, Gray Smooth CLW-DIMEX-P-IVR-S: Cameo Wireless In-Wall Dimmer, 120V, Ivory Smooth CLW-DIMEX-P-LAT-T: Cameo Wireless In-Wall Dimmer, 120V, Latte Textured CLW-DIMEX-P-W-S: Cameo Wireless In-Wall Dimmer, 120V, White Smooth CLW-DIMEX-P-W-T: Cameo Wireless In-Wall Dimmer, 120V, White Textured

8 CLW-DIMEX-P Cameo Wireless In-Wall Dimmer, 120V Included Accessories CLW-BTN-RKR-A-S: Rocker Engravable Button Cap (blank), Almond, Gloss [Included Quantity for CLW-DIMEX-P-A-S: 1] CLW-BTN-RKR-A-T: Rocker Engravable Button Cap (blank), Almond, Matte [Included Quantity for CLW-DIMEX-P-A-T: 1] CLW-BTN-RKR-B-S: Rocker Engravable Button Cap (blank), Black, Gloss [Included Quantity for CLW-DIMEX-P-B-S: 1] CLW-BTN-RKR-B-T: Rocker Engravable Button Cap (blank), Black, Matte [Included Quantity for CLW-DIMEX-P-B-T: 1] CLW-BTN-RKR-BRN-S: Rocker Engravable Button Cap (blank), Brown, Gloss [Included Quantity for CLW-DIMEX-P-BRN-S: 1] CLW-BTN-RKR-DA-S: Rocker Engravable Button Cap (blank), Dark Almond, Gloss [Included Quantity for CLW-DIMEX-P-DA-S: 1] CLW-BTN-RKR-DSK-T: Rocker Engravable Button Cap (blank), Dusk, Matte [Included Quantity for CLW-DIMEX-P-DSK-T: 1] CLW-BTN-RKR-GRY-S: Rocker Engravable Button Cap (blank), Gray, Gloss [Included Quantity for CLW-DIMEX-P-GRY-S: 1] CLW-BTN-RKR-IVR-S: Rocker Engravable Button Cap (blank), Ivory, Gloss [Included Quantity for CLW-DIMEX-P-IVR-S: 1] CLW-BTN-RKR-LAT-T: Rocker Engravable Button Cap (blank), Latte, Matte [Included Quantity for CLW-DIMEX-P-LAT-T: 1] CLW-BTN-RKR-W-S: Rocker Engravable Button Cap (blank), White, Gloss [Included Quantity for CLW-DIMEX-P-W-S: 1] CLW-BTN-RKR-W-T: Rocker Engravable Button Cap (blank), White, Matte [Included Quantity for CLW-DIMEX-P-W-T: 1] Available Accessories CEN-RFGW-EX: infinet EX Wireless Gateway CEN-RFGW-EX-PWE: infinet EX Wireless Gateway w/poe Injector MC3: 3-Series Control System w/infinet EX DIN-AP3MEX: DIN Rail 3-Series Automation Processor w/infinet EX CLW-EXPEX-GD-W-T: infinet EX Wireless Expander, Ground Pin Down, White Textured GLA-EXPEX: Crestron Green Light Wireless Expander for infinet EX Networks CLW-BTN-LG-A-S: Large Engravable Button Cap, Almond, Gloss CLW-BTN-LG-A-T: Large Engravable Button Cap, Almond, Matte CLW-BTN-LG-B-S: Large Engravable Button Cap, Black, Gloss CLW-BTN-LG-B-T: Large Engravable Button Cap, Black, Matte CLW-BTN-LG-BRN-S: Large Engravable Button Cap, Brown, Gloss CLW-BTN-LG-DA-S: Large Engravable Button Cap, Dark Almond, Gloss CLW-BTN-LG-DSK-T: Large Engravable Button Cap, Dusk, Matte CLW-BTN-LG-GRY-S: Large Engravable Button Cap, Gray, Gloss CLW-BTN-LG-IVR-S: Large Engravable Button Cap, Ivory, Gloss CLW-BTN-LG-LAT-T: Large Engravable Button Cap, Latte, Matte CLW-BTN-LG-W-S: Large Engravable Button Cap, White, Gloss CLW-BTN-LG-W-T: Large Engravable Button Cap, White, Matte CLW-BTN-RKR-A-S: Rocker Engravable Button Cap, Almond, Gloss CLW-BTN-RKR-A-T: Rocker Engravable Button Cap, Almond, Matte CLW-BTN-RKR-B-S: Rocker Engravable Button Cap, Black, Gloss CLW-BTN-RKR-B-T: Rocker Engravable Button Cap, Black, Matte CLW-BTN-RKR-BRN-S: Rocker Engravable Button Cap, Brown, Gloss CLW-BTN-RKR-DA-S: Rocker Engravable Button Cap, Dark Almond, Gloss CLW-BTN-RKR-DSK-T: Rocker Engravable Button Cap, Dusk, Matte CLW-BTN-RKR-GRY-S: Rocker Engravable Button Cap, Gray, Gloss CLW-BTN-RKR-IVR-S: Rocker Engravable Button Cap, Ivory, Gloss CLW-BTN-RKR-LAT-T: Rocker Engravable Button Cap, Latte, Matte CLW-BTN-RKR-W-S: Rocker Engravable Button Cap, White, Gloss CLW-BTN-RKR-W-T: Rocker Engravable Button Cap, White, Matte CLW-BTN-SM-A-S: Small Engravable Button Cap, Gloss CLW-BTN-SM-A-T: Small Engravable Button Cap, Matte CLW-BTN-SM-B-S: Small Engravable Button Cap, Gloss CLW-BTN-SM-B-T: Small Engravable Button Cap, Matte CLW-BTN-SM-BRN-S: Small Engravable Button Cap, Gloss CLW-BTN-SM-DA-S: Small Engravable Button Cap, Gloss CLW-BTN-SM-DSK-T: Small Engravable Button Cap, Matte CLW-BTN-SM-GRY-S: Small Engravable Button Cap, Gloss CLW-BTN-SM-IVR-S: Small Engravable Button Cap, Gloss CLW-BTN-SM-LAT-T: Small Engravable Button Cap, Matte CLW-BTN-SM-W-S: Small Engravable Button Cap, Gloss CLW-BTN-SM-W-T: Small Engravable Button Cap, Matte CLW-SLVU-P-A-S: Cameo In-Wall Remote Dimmer, 120V, Almond Smooth CLW-SLVU-P-A-T: Cameo In-Wall Remote Dimmer, 120V, Almond Textured CLW-SLVU-P-B-S: Cameo In-Wall Remote Dimmer, 120V, Black Smooth CLW-SLVU-P-B-T: Cameo In-Wall Remote Dimmer, 120V, Black Textured CLW-SLVU-P-BRN-S: Cameo In-Wall Remote Dimmer, 120V, Brown Smooth CLW-SLVU-P-DA-S: Cameo In-Wall Remote Dimmer, 120V, Dark Almond Smooth CLW-SLVU-P-DSK-T: Cameo In-Wall Remote Dimmer, 120V, Dusk Textured CLW-SLVU-P-GRY-S: Cameo In-Wall Remote Dimmer, 120V, Gray Smooth CLW-SLVU-P-IVR-S: Cameo In-Wall Remote Dimmer, 120V, Ivory Smooth CLW-SLVU-P-LAT-T: Cameo In-Wall Remote Dimmer, 120V, Latte Textured CLW-SLVU-P-W-S: Cameo In-Wall Remote Dimmer, 120V, White Smooth CLW-SLVU-P-W-T: Cameo In-Wall Remote Dimmer, 120V, White Textured Notes: 1. Any infinet EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery-powered infinet EX devices do not provide expander functionality. A dedicated infinet EX Wireless Expander, model CLW-EXPEX or GLA-EXPEX is also available. 2. Item(s) sold separately. 3. Derating applies for multigang installations. Refer to Installation Guide for more information. 4. A neutral wire is required for normal operation. Refer to the Installation Guide for alternate wiring configurations. This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at or by calling The specific patents that cover Crestron products are listed online at: patents.crestron.com. Crestron, the Crestron logo, 3-Series, 3-Series Control System, Cameo, Crestron Green Light, and infinet EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice Crestron Electronics, Inc.

9 CLW-DIMEX-P Cameo Wireless In-Wall Dimmer, 120V CAD DRAWINGS Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ Tel: / Fax: All brand names, product names and trademarks are the property of their respective owners Crestron Electronics, Inc. Specifications subject to change without notice. Revised 10/30/14

10 CLW-SWEX-P Cameo Wireless In-Wall Switch, 120V > > Field-replaceable, engravable buttons > > Available in all designer colors > > Robust infinet EX communication > > Models popular Cameo style > > Configurable with rocker or 2 buttons > > Matching aesthetics across entire line > > Supports remote dimmers and switches (CLW-SLVU-P) > > Screw-clamp connectors for easy installation > > Stylish bargraph provides real-time status feedback The CLW-SWEX-P is a Cameo wireless in-wall switch which features field-replaceable, engravable buttons. Available in designer colors and configurable with two buttons or in a rocker layout, the CLW-SWEX-P is more versatile than previous generations of in-wall switches. Its streamlined design matches the entire line of Cameo dimmers, switches and keypads, making it a great addition to new or retrofit installations. In addition to its attractive look and feel, infinet EX communication technology brings proven reliability to the CLW-SWEX-P. Field-Replaceable Button Faces Like their cousin Cameo keypads, the buttons on the CLW-SWEX-P can be swapped in the field, making it easy to change engraving or color after installation. The rocker controller brings a familiar user interface to the Crestron in-wall switch, while the two-button layout offers clear on/off control. infinet EX Ultra-reliable infinet EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infinet EX device functions as an expander, passing command signals through to every other infinet EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption. [1] The CLW-SWEX-P communicates with a Crestron control system via an infinet EX Wireless Gateway (model CEN-RFGW-EX, DIN-AP3MEX, or MC3 [2] ). Up to 100 infinet EX devices, including Cameo Wireless Keypads and In-Wall Switches [2], may coexist on a single wireless network, and every device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths [1]. Streamlined Installation In addition to field replaceable buttons, the CLW-SWEX-P features screwclamp connectors for simplified wiring while reducing installation time and material costs. So slim, the Cameo line can be installed in standard gang boxes making them the perfect choice for both new and retrofit projects. Remote Switch The CLW-SWEX-P supports control of the same lights from more than one location. Easily replace existing dimmers and switches wired in a traditional three- or four-way circuit with on/off control from every location, or design new projects to accommodate remote switches wherever desired. The CLW-SLVU-P remote dimmer simply connects to the traveler wire and switches the load attached to the CLW-SWEX-P. Custom Programmable Keypad Because the CLW-SWEX-P is attached to the Crestron network, it can also function as a keypad, sending commands to trigger whole-room or house lighting scenes, or any other function. The two-button layout takes advantage of prime single-gang wall box real estate. Use buttons to control in-room audio or lamps. Press-and-hold and double-tap functionality allows buttons to be used for more than just one function.

11 CLW-SWEX-P Cameo Wireless In-Wall Switch, 120V SPECIFICATIONS MODELS & ACCESSORIES Load Ratings Incandescent / Tungsten Halogen / Magnetic Ballast: 1000 VA/Watts; Electronic Ballasts / CFL: 600VA; Motor: 1/2 HP Minimum Load: 25 Watts Power Requirements 120 Volts AC, 60Hz, line power Controls Button: Configurable for 1 or 2 single-action pushbuttons, programmable via control system LED Indicator Feedback: (1) White LED Wireless RF Transceiver: infinet EX 2-way RF, 2.4 GHz ISM Channels (2400 to MHz), default channel 15; IEEE compliant Range (typical): 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s); subject to site-specific conditions and individual device capabilities [1] Gateway: Requires an infinet EX gateway [2] Connections Hot: (1) AWG,screw terminal, brass, line power input Remote: (1) AWG, screw terminal, blue, remote Load: (1) AWG, screw terminal, red, load output Neutral: (1) AWG, screw terminal, silver, neutral [3] Ground: (1) 18 AWG Class 1 flying lead, green, ground (wire nut included) Environmental Temperature: 32 to 104 F (0 to 40 C) Humidity: 10% to 90% RH (non-condensing) Enclosure 1-gang mountable in a 3-1/2 inch deep electrical box; Requires decorator style faceplate (not included) Dimensions Height: 4.13 in (105 mm) Width: 1.75 in (45 mm) Depth: 1.75 in (45 mm) Weight 5 oz (142 g) Available Models CLW-SWEX-P-A-S: Cameo Wireless In-Wall Switch, 120V, Almond Smooth CLW-SWEX-P-A-T: Cameo Wireless In-Wall Switch, 120V, Almond Textured CLW-SWEX-P-B-S: Cameo Wireless In-Wall Switch, 120V, Black Smooth CLW-SWEX-P-B-T: Cameo Wireless In-Wall Switch, 120V, Black Textured CLW-SWEX-P-BRN-S: Cameo Wireless In-Wall Switch, 120V, Brown Smooth CLW-SWEX-P-DA-S: Cameo Wireless In-Wall Switch, 120V, Dark Almond Smooth CLW-SWEX-P-DSK-T: Cameo Wireless In-Wall Switch, 120V, Dusk Textured CLW-SWEX-P-GRY-S: Cameo Wireless In-Wall Switch, 120V, Gray Smooth CLW-SWEX-P-IVR-S: Cameo Wireless In-Wall Switch, 120V, Ivory Smooth CLW-SWEX-P-LAT-T: Cameo Wireless In-Wall Switch, 120V, Latte Textured CLW-SWEX-P-W-S: Cameo Wireless In-Wall Switch, 120V, White Smooth CLW-SWEX-P-W-T: Cameo Wireless In-Wall Switch, 120V, White Textured Included Accessories CLW-BTN-RKR-A-S: Rocker Engravable Button Cap (blank), Almond, Gloss [Included Quantity for CLW-SWEX-P-A-S: 1] CLW-BTN-RKR-A-T: Rocker Engravable Button Cap (blank), Almond, Matte [Included Quantity for CLW-SWEX-P-A-T: 1] CLW-BTN-RKR-B-S: Rocker Engravable Button Cap (blank), Black, Gloss [Included Quantity for CLW-SWEX-P-B-S: 1] CLW-BTN-RKR-B-T: Rocker Engravable Button Cap (blank), Black, Matte [Included Quantity for CLW-SWEX-P-B-T: 1] CLW-BTN-RKR-BRN-S: Rocker Engravable Button Cap (blank), Brown, Gloss [Included Quantity for CLW-SWEX-P-BRN-S: 1] CLW-BTN-RKR-DA-S: Rocker Engravable Button Cap (blank), Dark Almond, Gloss [Included Quantity for CLW-SWEX-P-DA-S: 1] CLW-BTN-RKR-DSK-T: Rocker Engravable Button Cap (blank), Dusk, Matte [Included Quantity for CLW-SWEX-P-DSK-T: 1] CLW-BTN-RKR-GRY-S: Rocker Engravable Button Cap (blank), Gray, Gloss [Included Quantity for CLW-SWEX-P-GRY-S: 1] CLW-BTN-RKR-IVR-S: Rocker Engravable Button Cap (blank), Ivory, Gloss [Included Quantity for CLW-SWEX-P-IVR-S: 1] CLW-BTN-RKR-LAT-T: Rocker Engravable Button Cap (blank), Latte, Matte [Included Quantity for CLW-SWEX-P-LAT-T: 1] CLW-BTN-RKR-W-S: Rocker Engravable Button Cap (blank), White, Gloss [Included Quantity for CLW-SWEX-P-W-S: 1] CLW-BTN-RKR-W-T: Rocker Engravable Button Cap (blank), White, Matte [Included Quantity for CLW-SWEX-P-W-T: 1] Available Accessories CEN-RFGW-EX: infinet EX Wireless Gateway CEN-RFGW-EX-PWE: infinet EX Wireless Gateway w/poe Injector MC3: 3-Series Control System w/infinet EX

12 CLW-SWEX-P Cameo Wireless In-Wall Switch, 120V DIN-AP3MEX: DIN Rail 3-Series Automation Processor w/infinet EX CLW-EXPEX-GD-W-T: infinet EX Wireless Expander, Ground Pin Down, White Textured GLA-EXPEX: Crestron Green Light Wireless Expander for infinet EX Networks CLW-BTN-LG-A-S: Large Engravable Button Cap, Almond, Gloss CLW-BTN-LG-A-T: Large Engravable Button Cap, Almond, Matte CLW-BTN-LG-B-S: Large Engravable Button Cap, Black, Gloss CLW-BTN-LG-B-T: Large Engravable Button Cap, Black, Matte CLW-BTN-LG-BRN-S: Large Engravable Button Cap, Brown, Gloss CLW-BTN-LG-DA-S: Large Engravable Button Cap, Dark Almond, Gloss CLW-BTN-LG-DSK-T: Large Engravable Button Cap, Dusk, Matte CLW-BTN-LG-GRY-S: Large Engravable Button Cap, Gray, Gloss CLW-BTN-LG-IVR-S: Large Engravable Button Cap, Ivory, Gloss CLW-BTN-LG-LAT-T: Large Engravable Button Cap, Latte, Matte CLW-BTN-LG-W-S: Large Engravable Button Cap, White, Gloss CLW-BTN-LG-W-T: Large Engravable Button Cap, White, Matte CLW-BTN-RKR-A-S: Rocker Engravable Button Cap, Almond, Gloss CLW-BTN-RKR-A-T: Rocker Engravable Button Cap, Almond, Matte CLW-BTN-RKR-B-S: Rocker Engravable Button Cap, Black, Gloss CLW-BTN-RKR-B-T: Rocker Engravable Button Cap, Black, Matte CLW-BTN-RKR-BRN-S: Rocker Engravable Button Cap, Brown, Gloss CLW-BTN-RKR-DA-S: Rocker Engravable Button Cap, Dark Almond, Gloss CLW-BTN-RKR-DSK-T: Rocker Engravable Button Cap, Dusk, Matte CLW-BTN-RKR-GRY-S: Rocker Engravable Button Cap, Gray, Gloss CLW-BTN-RKR-IVR-S: Rocker Engravable Button Cap, Ivory, Gloss CLW-BTN-RKR-LAT-T: Rocker Engravable Button Cap, Latte, Matte CLW-BTN-RKR-W-S: Rocker Engravable Button Cap, White, Gloss CLW-BTN-RKR-W-T: Rocker Engravable Button Cap, White, Matte CLW-SLVU-P-A-S: Cameo In-Wall Remote Dimmer, 120V, Almond Smooth CLW-SLVU-P-A-T: Cameo In-Wall Remote Dimmer, 120V, Almond Textured CLW-SLVU-P-B-S: Cameo In-Wall Remote Dimmer, 120V, Black Smooth CLW-SLVU-P-B-T: Cameo In-Wall Remote Dimmer, 120V, Black Textured CLW-SLVU-P-BRN-S: Cameo In-Wall Remote Dimmer, 120V, Brown Smooth CLW-SLVU-P-DA-S: Cameo In-Wall Remote Dimmer, 120V, Dark Almond Smooth CLW-SLVU-P-DSK-T: Cameo In-Wall Remote Dimmer, 120V, Dusk Textured CLW-SLVU-P-GRY-S: Cameo In-Wall Remote Dimmer, 120V, Gray Smooth CLW-SLVU-P-IVR-S: Cameo In-Wall Remote Dimmer, 120V, Ivory Smooth CLW-SLVU-P-LAT-T: Cameo In-Wall Remote Dimmer, 120V, Latte Textured CLW-SLVU-P-W-S: Cameo In-Wall Remote Dimmer, 120V, White Smooth CLW-SLVU-P-W-T: Cameo In-Wall Remote Dimmer, 120V, White Textured Notes: 1. Any infinet EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery-powered infinet EX devices do not provide expander functionality. A dedicated infinet EX Wireless Expander, model CLW-EXPEX or GLA-EXPEX is also available. 2. Item(s) sold separately. 3. A neutral wire is required for normal operation. Refer to the manual for alternate wiring configurations. This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at or by calling The specific patents that cover Crestron products are listed online at: patents.crestron.com. Crestron, the Crestron logo, 3-Series, 3-Series Control System, Cameo, Crestron Green Light, and infinet EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice Crestron Electronics, Inc.

13 CLW-SWEX-P Cameo Wireless In-Wall Switch, 120V CAD DRAWINGS Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ Tel: / Fax: All brand names, product names and trademarks are the property of their respective owners Crestron Electronics, Inc. Specifications subject to change without notice. Revised 10/30/14

14 DM-CONN-ULTRA-RECP DigitalMedia Ultra Keystone RJ45 Jack > > Shielded CAT6a RJ45 jack > > Keystone module form factor > > Best-in-class performance > > Exceeds Category 6A performance requirements > > Ultra-fast and reliable termination > > Robust die cast metal housing > > Enhanced 360 degree shielding > > Automatic cable shield termination [1] > > Accommodates multiple cable diameters > > Ultimate performance for 10GBase-T Ethernet, Crestron DM 8G+, and HDBaseT > > Compatible with Crestron DM 8G and DM Ultra cable > > Sold in packs of 20 or 50 with termination tool included The DM-CONN-ULTRA-RECP is a shielded CAT6a RJ45 jack designed for use with the Crestron DigitalMedia 24-Port Keystone Patch Panel (model DM-RPP-K24) or any keystone wall plate. It fits in a standard keystone module opening and can be field-terminated in as little as 60 seconds using the tool provided. Using the DM-CONN-ULTRA-RECP in combination with DM Ultra cable ensures the highest performance and reliability for distributing uncompressed 4K/60 video over cable lengths up to 330 ft (100 m) as part of a complete Crestron DigitalMedia system. It also excels for use with HDBaseT and 10GBase-T Ethernet. The DM-CONN-ULTRA-RECP offers best-in-class performance exceeding all Category 6A performance requirements. In fact, it exceeds all applicable industry standards including ANSI/TIA-568-C.2 and ISO/IEC Ed 2.2. Such exceptional performance is achieved through an innovative termination process utilizing a unique tool and linear termination module that eliminate split and crossed pairs. The diagonally-oriented IDC contact configuration maximizes pair-to-pair separation, thereby minimizing alien crosstalk in even the densest Category 6A patching environments. The entire termination process is made incredibly quick and easy while removing variability to ensure consistently high performance and reliability. The DM-CONN-ULTRA-RECP is sold in packages of 20 or 50. Each package includes one termination tool. SPECIFICATIONS Connectors Compatible Cable Standards: CAT5e, CAT6, CAT6a (including Crestron DM 8G and DM Ultra cable) Contact Resistance: 20 mω Input to Output Resistance: 200 mω Insulation Resistance: 500 mω Dielectric Withstand Voltage: 1500 Volts DC or AC peak minimum; 1000 Volts DC or AC peak minimum contact to contact Current Rating: 1.5 Amps PoE Compatibility: IEEE 802.3at PoE & PoE+ Shielding: 360 degree shielded enclosure Mechanical Jack Compatible Plug Types: RJ45 (8-position), RJ11 (6-position) Insertion Cycles: 2500 minimum Contact Force: 50 gf minimum Retention Force: 50 N minimum Mechanical Terminals Compatible Cable Constructions: S/FTP, F/FTP, F/UTP Wiring Standards: TIA/EIA T568A & T568B Wire Size Range: 22 to 26 AWG (0.25 to 0.14 mm 2 ) nominal solid; 23 to 26 AWG (0.25 to 0.14 mm 2 ) nominal stranded Wire Conductor Diameter: in (0.60 mm) maximum Wire Conductor Insulation Diameter: in (1.48 mm) maximum Cable Overall Outer Diameter: in (9 mm) maximum Reterminations: 5 maximum (not recommended with 22 AWG shielded) Construction Housing Material: Zinc die cast Contact Materials: Plated phosphor bronze, stainless steel Plastic Materials: Flame retardant thermoplastic Flammability Rating: UL 94V-0 Green Features: RoHS, lead-free, halogen-free, PVC free Environmental Temperature: 14 to 140 F (-10 to 60 C) Dimensions Height: 0.84 in (21.1 mm) Width: 0.57 in (14.5 mm) Depth: 1.60 in (41.2 mm) Weight 1 oz (29 g)

15 DM-CONN-ULTRA-RECP DigitalMedia Ultra Keystone RJ45 Jack Compliance ANSI/TIA-568-C.2, ISO/IEC Ed 2.2, ETL Tested, IEEE 802.3an, IEEE 802.3af, IEEE 802.3at, ANSI/TIA 1096-A, IEC , IEC (3rd party verified) MODELS Available Models DM-CONN-ULTRA-RECP-20: DigitalMedia Ultra Keystone RJ45 Jack, 20-Pack w/termination Tool DM-CONN-ULTRA-RECP-50: DigitalMedia Ultra Keystone RJ45 Jack, 50-Pack w/termination Tool Notes: Rear View 1. When installed in a DM-RPP-K24 patch panel frame. This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at or by calling The specific patents that cover Crestron products are listed online at: patents.crestron.com. Certain Crestron products contain open source software. For specific information, please visit Crestron, the Crestron logo, DigitalMedia, DM, DM 8G, and DM 8G+ are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. HDBaseT is either a trademark or registered trademark of the HDBaseT Alliance in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice Crestron Electronics, Inc. Crimp Tool Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ Tel: / Fax: All brand names, product names and trademarks are the property of their respective owners Crestron Electronics, Inc. Specifications subject to change without notice. Revised 04/06/16

16 DMPS3-4K-100-C 3-Series 4K DigitalMedia Presentation System 100 The DMPS3-4K-100-C from Crestron provides an ultra high-definition presentation switcher and control solution that s perfect for huddle rooms, conference rooms, and classrooms. It integrates the control system, multi-format switcher, 4K video scaler, mic preamp, and audio DSP all into one compact device that mounts conveniently under a conference table or in an equipment rack. Built-in Crestron Connect It functionality affords a complete collaboration solution that s easy and affordable to deploy in any small to medium sized meeting space. Without requiring any programming, the DMPS3-4K-100-C is easily configurable for a variety of media presentation applications. > > Ultra high-definition, multi-format presentation switcher, scaler, mic preamp, audio DSP, and control system > > Out of the box Crestron Connect It collaboration system functionality > > Supports up to four TT-100 series Crestron Connect It Cable Caddies [1] > > Built-in.AV Framework delivers a fully-functional system without any programming [3] > > Integrated 3-Series Control System allows fully-programmable room control > > Includes four auto-switching HDMI, VGA, and stereo analog audio inputs [6] > > Also supports Dual-Mode DisplayPort, DVI, and analog video sources [4,5] > > Input auto-detection configures each input automatically > > QuickSwitch HD technology manages HDCP keys for fast, reliable switching > > Auto-Locking technology achieves rapid switching between disparate sources > > Performs automatic AV signal format management via EDID > > Provides adjustable input level compensation on each audio input > > Includes a single microphone input with EQ, gating, and compression > > Provides parallel HDMI and DM 8G+ outputs for one or more display devices > > DigitalMedia 8G+ connectivity enables long-distance wiring over CAT type twisted pair cable [9] > > Integrates seamlessly with DigitalMedia matrix switchers to allow facility-wide signal distribution > > HDBaseT Certified Enables direct connection to an HDBaseT certified display device > > Features a built-in, high-performance 4K scaler > > Upscales input signals to match the native resolution of any screen including 4K and Ultra HD displays! > > Downscales 4K, UHD, and ultra high-resolution computer signals to fit 1080p and other lower-resolution displays > > Handles any input resolution from standard NTSC 480i or PAL 576i, to UHD and 4K > > Provides intelligent frame rate conversion, content-adaptive noise reduction, and motion-adaptive de-interlacing > > Provides 3D to 2D signal conversion, and passes 3D video (without scaling) to 3D displays [7] > > Provides a balanced stereo audio output with graphic EQ, limiting, and delay > > Enables analog-to-hdmi audio embedding and de-embedding [6] > > Handles Dolby TrueHD, Dolby Atmos, DTS-HD, and uncompressed 7.1 linear PCM audio [8] > > Includes onboard IR, RS-232, and Cresnet control ports > > Supports Crestron touch screens, keypads, and wireless remotes > > Supports XPanel with Smart Graphics computer and web based control > > Supports iphone, ipad, and Android control apps > > Supports universal remotes via built-in RC-5 compatible IR receiver > > Communicates natively with Crestron Fusion > > Enables IT-friendly network integration via SNMP > > Integrated Ethernet switch provides a single-point LAN connection > > Private Network Mode requires just one IP address for the complete system > > Includes front panel controls for switching and volume adjustment > > Includes customizable front panel label strips > > Allows complete AV setup and adjustment via a web browser > > Features an internal universal power supply for worldwide compatibility > > Furnishes power to PoDM and HDBaseT PoE powered devices > > Mounts under the table or in a single 19 rack space

17 DMPS3-4K-100-C 3-Series 4K DigitalMedia Presentation System 100 DMPS3-4K-100-C Rear View Auto-switching HDMI, VGA, and analog audio inputs provide the essential connectivity needed to manage multiple computers and other media sources. A full-featured microphone input is also included for applications requiring high-quality speech reinforcement. The selected input source and microphone can be mixed and routed to one HDMI output and one stereo analog audio output. Additionally, its DigitalMedia 8G+ output affords a streamlined, long-distance wiring solution for the display device, and for facility-wide integration as part of a larger media distribution system. Built-in 4K scaling ensures the highest possible image quality, and compatibility with the widest range of sources and displays. 4K Ultra HD The DMPS3-4K-100-C handles 4K and Ultra HD video signals, which is essential to ensure support for the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA. Crestron Connect It Crestron Connect It is a cost-effective, simple-to-use presentation solution that provides tabletop BYOD connectivity and one-touch control for multiple participants around a conference table. Simply add up to four Crestron Connect It Cable Caddies (TT-100 series [1] ) to the DMPS3-4K-100-C. Its auto-switching inputs support individual HDMI, VGA, and analog audio connections at each cable caddy. Four USB ports on the DMPS3-4K-100-C provide power and communications for each cable caddy. A fully functional Crestron Connect It system is enabled right out of the box by simply connecting the cable caddies and input cables. Additional settings and AV adjustments are available through a simple web browser setup screen. In addition to the Crestron Connect It devices, the DMPS3-4K-100-C can also accommodate a single DM receiver and an AirMedia Presentation Gateway without any additional programming. [1,2] No Programming Required! Installing the DMPS3-4K-100-C is easy, fast, and affordable. Built-in.AV Framework technology delivers a fully-functional presentation system with simplified configuration and a choice of control options and other add-ons. For complete details on the capabilities supported by.av Framework, please visit: [3] Multi-Format Auto-Switcher The DMPS3-4K-100-C provides high-performance automatic switching between four groups of inputs, each including HDMI, VGA, and unbalanced stereo audio. The HDMI inputs are compatible with DVI and Dual-Mode DisplayPort sources, and the VGA inputs can handled RGB, composite, S-Video, and component video sources. Digital audio is supported by the HDMI inputs, plus each analog audio input may be used in combination with its corresponding VGA or HDMI video input. Input auto-detection eliminates the need to configure the inputs simply connect your source and the DMPS3-4K-100-C selects the right audio and video combination. The switched video signal is routed to one HDMI output and one DM 8G+ output simultaneously. The DM 8G+ output is compatible with HDBaseT. [4,5,6] 4K Scaler With its high-performance 4K video scaler on board, the DMPS3-4K-100-C ensures an optimal image from every video source. It allows all types of video and computer sources to be viewed reliably and look their best on any display up to 4K. It accepts any input resolution, from standard definition NTSC 480i to ultra high-definition DCI 4K, and scales it perfectly to match the native resolution of any screen up to DCI 4K (4096 x 2160). Interlaced sources are converted to progressive scan using motionadaptive deinterlacing. Intelligent frame rate conversion enables support for 24p and PAL format sources. And, 3D to 2D conversion allows 3D content to be viewed on 2D-only displays. [7] The output of the scaler feeds both the HDMI and DM 8G+ outputs. Flexible Audio Outputs The switched audio signal is routed to the HDMI output as well as to a separate balanced analog audio output, with individual level adjustments provided for each output. The HDMI output signal is also fed simultaneously to the DM 8G+ output. All inputs and outputs support stereo audio, with the option to configure the analog output for mono. Dolby TrueHD, Dolby Atmos, DTS-HD, and 7.1 linear PCM audio signals can also be routed through the HDMI inputs and output, as well as the DM 8G+ output. [8] Professional Audio DSP The analog audio output includes professional digital signal processing, allowing the signal to be adjusted for optimum performance and sound quality. The analog output is ideally designed to be connected to an external power amplifier and used to drive a set of ceiling or wall mount speakers. In addition to volume, bass, treble, and mute controls, the DSP provides 10-band graphic equalization, fully-adjustable limiting, and up to 80 ms of delay. All settings are adjustable using the DMPS3-4K-100-C s web browser user interface for easy setup. The output volume level is also adjustable using the front panel volume knob. Microphone Input with DSP A full-featured microphone preamp is included to support the connection of a single wired or wireless mic. Advanced features include fully-adjustable gating and compression, 4-band semi-parametric EQ, and switchable 48V phantom power. The microphone signal can be routed to the analog output, the digital output (HDMI and DM 8G+), or both, with separate level adjustments provided for each.

18 DMPS3-4K-100-C 3-Series 4K DigitalMedia Presentation System 100 DigitalMedia 8G+ Its DM 8G+ output endows the DMPS3-4K-100-C with great potential for connecting to a display device and integrating with larger systems. DM 8G+ provides a true one-wire interface for transporting ultra high-definition video, audio, control, power, and networking signals over CAT type cable at distances up to 330 feet (100 meters). Connecting a DM 8G+ receiver to the DM 8G+ output provides a streamlined AV and control interface for a single projector or flat panel display located anywhere in the room. DM 8G+ can also provide the interface to a centralized DigitalMedia matrix switcher, allowing the DMPS3-4K-100-C s output signal to be distributed to other rooms and buildings. [9] HDBaseT Certified Crestron DM 8G+ technology is designed using HDBaseT Alliance specifications, ensuring interoperability with other HDBaseT certified products. Via DM 8G+, the DMPS3-4K-100-C can be connected directly to an HDBaseT compliant display device without requiring a DM 8G+ receiver. EDID Format Management The DMPS3-4K-100-C provides comprehensive management of the EDID (Extended Display Identification Data) information that passes between display devices and input sources, ensuring that each source gets displayed at its optimal resolution and format. Most applications require no changes to the default settings. For applications requiring custom configuration, the DMPS3-4K-100-C allows for easy assessment of each device s format and resolution capabilities, with the ability to configure signals appropriately for the most desirable and predictable behavior. QuickSwitch HD Technology Handling digital media signals means handling HDCP (High-bandwidth Digital Content Protection), the encryption scheme used by content providers to protect their DVDs, Blu-ray discs, and broadcast signals against unauthorized copying. Viewing HDCP encrypted content requires a source device to authenticate each display and signal processor in the system and issue it a key before delivering an output signal. Crestron QuickSwitch HD manages these keys to ensure fast, reliable switching and immunity to blackouts, whether using a single display, or distributing to multiple displays through a larger DigitalMedia system. Auto-Locking Technology Crestron Auto-Locking Technology enables super fast signal switching by instantaneously configuring every device in the signal path, including DM receivers and scalers, as soon as the signal hits the first device. Whether switching between sources or TV channels, Auto-Locking significantly reduces the time it takes each device to sense the new signal and configure itself to handle the changes, virtually eliminating any noticeable gap while switching. Integrated 3-Series Control System Its built-in 3-Series control system enables the DMPS3-4K-100-C to provide complete, customizable control of every AV device, as well as room lighting, window shades, and projection screens, without requiring a separate control processor. Onboard control ports include one IR port and one RS-232 COM port, as well as Cresnet and Ethernet. The DMPS3-4K-100-C supports the full line of Crestron touch screens, keypads, and wireless remotes for a user experience custom tailored to the specific requirements of each end-user. Support for Crestron control apps and Crestron Fusion delivers the industry s most powerful platform for remotely controlling and managing multiple rooms using computers and mobile devices. CEC Embedded Device Control For controlling third-party AV devices, the DMPS3-4K-100-C provides an alternative to conventional IR, RS-232, and Ethernet by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Using CEC, many devices can be controlled right through their HDMI or HDBaseT connections, eliminating the need for any dedicated serial cables or IR emitters. Built-in Ethernet Switch In addition to transporting digital video and audio, the DM 8G+ output port can also extend Ethernet out to the display device, providing a high-speed LAN connection for the display via the DM receiver. Ethernet is also utilized internally by the Crestron control bus to manage the receiver and provide device control. Private Network Mode To streamline its implementation on a corporate or university LAN, the DMPS3-4K-100-C employs Private Network Mode to provide a single-point connection for the complete system. Using Private Network Mode, the DMPS3-4K-100-C requires just one IP address. SPECIFICATIONS Operating System Crestron 3-Series; real-time, preemptive, multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs; preloaded DMPS3.AV Framework Base Program; out-of-the-box Crestron Connect It functionality Control System Memory SDRAM: 1 GB Flash: 4 GB Communications Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS compliant encryption, IEEE 802.1X, SNMP, BACnet /IP [10], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 web server, SMTP client, RSTP, Private Network Mode Cresnet: Cresnet master mode USB: USB host ports for Crestron Connect It devices and firmware update via USB flash drive; USB device port for computer console (setup) RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking IR/Serial: 1-way device control via infrared up to 1.2 MHz or serial TTL/ RS-232 (0-5 Volts) up to 115.2k baud; built-in RC-5 compatible IR receiver

19 DMPS3-4K-100-C 3-Series 4K DigitalMedia Presentation System 100 DigitalMedia: DM 8G+, HDCP, EDID, CEC, PoDM, Ethernet HDBaseT: HDCP, EDID, CEC, RS-232, PoE, Ethernet HDMI: HDCP, EDID, CEC NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI and HDBaseT devices and the control system Video Switcher: 8x1 (organized as multi-format 4x1), auto-switching, autodetecting multi-format digital/analog source inputs, QuickSwitch HD technology Scaler: 4K video scaler, motion-adaptive deinterlacer, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion [7], contentadaptive noise reduction, widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1) Input Signal Types: HDMI w/deep Color, 3D, & 4K (DVI & Dual-Mode DisplayPort compatible [4] ); RGB/VGA (RGBHV, RGBS, RGsB); component (YPbPr); S-Video (Y/C); composite (NTSC, PAL) [5] Output Signal Types: HDMI w/deep Color, 3D, & 4K (DVI compatible [4] ); DM 8G+ & HDBaseT w/deep Color, 3D, & 4K Analog-To-Digital Conversion: 10-bit 165 MHz per each of 3 channels Maximum Pass-Through Resolutions: Input Type Scan Type Resolution HDMI RGB/VGA Component [5] Composite or S-Video [5] Progressive 4096x2160 DCI 4K or 3840x2160 4K UHD Frame Rate Color Sampling Color Depth 24 Hz 4:4:4 30 bit 30 Hz 4:4:4 24 bit 30 Hz 4:2:2 36 bit 60 Hz 4:2:0 24 bit 2560x1600 WQXGA 60 Hz 4:4:4 36 bit 1920x1080 HD1080p 60 Hz 4:4:4 36 bit Interlaced 1920x1080 HD1080i 30 Hz 4:4:4 36 bit Progressive 1600x1200 UXGA 60 Hz n/a 1920x1200 WUXGA 60 Hz n/a Progressive 1920x1080 HD1080p 60 Hz n/a Interlaced 1920x1080 HD1080i 30 Hz n/a Interlaced Maximum Scaler Input Resolutions: 480i NTSC or 576i PAL Input Type Scan Type Resolution HDMI RGB/VGA Progressive 4096x2160 DCI 4K or 3840x2160 4K UHD 60 Hz n/a Frame Rate Color Sampling Color Depth 24 Hz 4:4:4 30 bit 30 Hz 4:4:4 24 bit 30 Hz 4:2:2 36 bit 2560x1600 WQXGA 60 Hz 4:4:4 36 bit 1920x1080 HD1080p 60 Hz 4:4:4 36 bit Interlaced 1920x1080 HD1080i 30 Hz 4:4:4 36 bit Progressive 1600x1200 UXGA 60 Hz n/a 1920x1200 WUXGA 60 Hz n/a Input Type Scan Type Resolution Component [5] Composite or S-Video [5] Frame Rate Color Sampling Progressive 1920x1080 HD1080p 60 Hz n/a Interlaced 1920x1080 HD1080i 30 Hz n/a Interlaced 480i NTSC or 576i PAL Maximum Scaler Output Resolutions: Output Type Scan Type Resolution HDMI, DM, or HDBaseT Progressive 4096x2160 DCI 4K or 3840x2160 4K UHD 60 Hz n/a Frame Rate Color Sampling Color Depth Color Depth 24 Hz 4:4:4 30 bit 30 Hz 4:4:4 24 bit 30 Hz 4:2:2 36 bit 2560x1600 WQXGA 60 Hz 4:4:4 36 bit 1920x1080 HD1080p 60 Hz 4:4:4 36 bit NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz for digital inputs and outputs, or 165 MHz for analog inputs Audio General Switcher/Mixer: 8x1 (organized as multi-format 4x1) stereo source switcher, auto-detecting digital/analog source inputs, single-channel gated mic preamp w/dsp, two independent mic/source mixers (one for analog output, one for digital outputs), stereo DSP for analog output, 4x1 multichannel source switcher, digital audio mixer bypass mode for multichannel pass-through to digital outputs Analog-To-Digital Conversion: 24-bit 48 khz Digital-To-Analog Conversion: 24-bit 48 khz Frequency Response: 20 Hz to 20 khz ±0.5 db (digital source); 20 Hz to 20 khz ±0.5 db (analog line source); 20 Hz to 20 khz ±0.7 db (microphone source) S/N Ratio: >108 db, 1 khz, A-weighted (digital source); >103 db, 1 khz, A-weighted (analog line source) THD+N: <0.002%, 20 Hz to 20 khz (digital source); <0.005%, 20 Hz to 20 khz (analog line source); <0.05%, 20 Hz to 20 khz (microphone source) Stereo Separation: >108 db (digital source); >103 db (analog source) Audio Microphone Input Input Signal Type: Mono analog mic level Phantom Power: Enable/Disable Gain: 0 to +60 db Gain adjustment, plus Mute EQ Center Frequencies: 50 to 200 Hz (Band 1); 200 to 800 Hz (Band 2); 800 to 3.2k Hz (Band 3); 3.2k to 12.8k Hz (Band 4) EQ Gain: ±12.0 db per band Gating Threshold: -80 to 0 db Gating Depth (Attenuation): -80 to 0 db Gating Attack: 1 to 250 ms Gating Release: 1 to 1000 ms Gating Hold: 1 to 200 ms

20 DMPS3-4K-100-C 3-Series 4K DigitalMedia Presentation System 100 Compression Threshold: -80 to 0 db Compression Ratio: 1:1 to 10:1 Compression Attack: 1 to 250 ms Compression Release: 1 to 1000 ms Compression Hold: 1 to 200 ms Compression Curve: Hard or soft knee Audio Source Inputs Typical of 8 source input channels (Audio Inputs 1 4, HDMI Inputs 1 4) Input Signal Types: Analog 2-channel [6], HDMI (Dual-Mode DisplayPort compatible [4] ) Analog Formats: Stereo 2-channel Digital Formats: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, LPCM up to 8 channels [8] Input Compensation: ±10.0 db [8] Audio Analog Line Output Output Signal Type/Format: Stereo 2-channel Mic: -80 to +10 db Level adjustment range, plus Mute and Pan Source: -80 to +10 db Level adjustment range, plus Mute and Balance Master Volume: -80 to +10 db Level adjustment range, plus Mute and Mono Bass: ±12.0 db Treble: ±12.0 db Equalization: 10-band graphic GEQ Center Frequencies: 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz GEQ Gain: ±12.0 db per band Delay: 0.0 to 80.0 ms Limiter Threshold: -80 to 0 dbz Limiter Ratio: 1:1 to 10:1 Limiter Attack: 1 to 250 ms Limiter Release: 1 to 1000 ms Limiter Curve: Hard or soft knee Audio Digital Output Output Signal Types: HDMI, DM 8G+ & HDBaseT Formats: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, LPCM up to 8 channels [8] Mic: -80 to +10 db Level adjustment range, plus Mute and Pan [8] Source: -80 to +10 db Level adjustment range, plus Mute and Balance [8] Master Volume: -80 to +10 db Level adjustment range, plus Mute [8] Connectors Audio/Video Inputs VGA IN 1 4: (4) HD15 female; Analog VGA/RGB/video inputs; Signal Types: VGA, RGB, component, S-Video, or composite [5] ; Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC or PAL; Input Level: 0.5 to 1.5 Vp-p with built-in DC restoration; Input Impedance: 75 Ohms nominal; Sync Detection: RGBHV, RGBS, RGsB, YPbPr; Sync Input Level: 3 to 5 Vp-p; Sync Input Impedance: 2.2k Ohms AUDIO IN 1 4: (4) 3.5 mm TRS mini phone jacks; Unbalanced stereo line-level analog audio inputs; Input Impedance: 32k Ohms unbalanced; Maximum Input Level: 2.8 Vrms unbalanced; Note: If an HDMI input is selected but no digital audio signal is detected, the corresponding analog audio input is activated (AUDIO 1 for HDMI 1, etc.). Please note, the analog audio inputs do not pass audio if the HDMI video input resolution is higher than 1920x1200. HDMI IN 1 4: (4) 19-pin Type A HDMI female; Digital video/audio inputs; Signal Types: HDMI, DVI, or Dual-Mode DisplayPort [4] MIC IN: (1) 3-pin 3.5 mm detachable terminal block; Balanced microphone audio input; Input Level: -60 to 0 dbv, 1 Vrms maximum; Input Impedance: 6.5k Ohms balanced; Phantom Power: 48 Volts DC, software enabled/disabled Connectors Audio/Video Outputs HDMI OUT: (1) 19-pin Type A HDMI female; Digital video/audio output; Signal Types: HDMI, DVI [4] DM OUT: (1) 8-pin RJ45 female, shielded; DM 8G+ output, HDBaseT compliant; PoDM PSE port (HDBaseT PoE compatible); Connects to the DM 8G+ input of a DM receiver or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [9] AUDIO OUT: (1) 5-pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line-level audio output; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced Connectors - Control & Power IR OUT: (1) 3.5 mm mini-phone jack; IR/Serial output port; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud COM: (1) 5-pin 3.5 mm detachable terminal block; Bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support LAN: (1) 8-pin RJ45 female; 10Base-T/100Base-TX Ethernet port USB 1 4: (4) USB Type A female; USB 2.0 host ports for TT-100 series Crestron Connect It Cable Caddies [1] ; Also enables firmware update via USB flash drive G: (1) 6-32 screw, chassis ground lug

21 DMPS3-4K-100-C 3-Series 4K DigitalMedia Presentation System 100 NET: (1) 4-pin 3.5 mm detachable terminal block; Cresnet Master port; Available Cresnet Power: 24 Watts V~1.4A 50/60Hz: (1) IEC C14 main power inlet; Mates with removable power cord, included COMPUTER (front): (1) USB Type B female; USB computer console port; For setup only IR IN (front): (1) Infrared sensor; IR Frequency: 36 to 38 khz; IR Formats: Crestron format, RC5; Allows control from IR wireless remotes using the Crestron or RC-5 command sets Controls & Indicators PWR: (1) Bi-color green/amber LED, indicates operating power supplied from AC line power, turns amber while booting and green when operating NET: (1) Yellow LED, indicates Cresnet bus activity MSG: (1) Red LED, indicates internal control system has generated an error message HW-R: (1) Recessed pushbutton for hardware reset, reboots the control system SW-R: (1) Recessed pushbutton for software reset, restarts the software program AUTO INPUT SELECT: (1) Pushbutton and bi-color green/amber LED, selects auto-switching mode VGA INPUT SELECT 1 4: (4) Pushbuttons for manual input selection, and (4) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding VGA input HDMI INPUT SELECT 1 4: (4) Pushbuttons for manual input selection, and (4) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding HDMI input VOLUME: (1) Continuous turn rotary encoder, adjusts the analog audio output volume DM OUT (rear): (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence, for the DM output LAN (rear): (2) LEDs, bi-color LED (left) indicates Ethernet speed and activity, green LED (right) indicates Ethernet link status Environmental Temperature: 41 to 104 F (5 to 40 C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: 122 BTU/hr typical, 89 BTU/hr idle Enclosure Chassis: Metal, black finish, fan-cooled, vented sides Front Panel: Metal, black finish with polycarbonate label overlay Mounting: Freestanding, 1 RU 19-inch rackmount, or under-table mount (adhesive feet, rack ears, and under-table mounting brackets included) Dimensions Height: 1.74 in (45 mm) without feet Width: in (439 mm); in (482 mm) with rack ears Depth: in (266 mm) Weight 6.4 lb (2.9 kg) DM 8G+ & HDBaseT Maximum Cable Lengths Resolution: Cable Type: 1080p60 Full HD 1920x1200 WUXGA 1600x1200 UXGA 2048x1080 DCI 2K 2560x1440 WQHD 2560x1600 WQXGA 3840x2160 4K UHD 4096x2160 DCI 4K DM-CBL-ULTRA DM Ultra Cable 330 ft (100 m) DM-CBL-8G DM 8G Cable 330 ft (100 m) 230 ft (70 m) CAT5e (or better) [9] 330 ft (100 m) 165 ft (50 m) Power Main Power: Volts AC, 50/60 Hz Power Consumption: 36 Watts typical, 26 Watts idle Available Cresnet Power: 24 Watts Power over DM (PoDM): IEEE 802.3at compliant PoDM PSE (Power Sourcing Equipment), DM OUT port supplies up to 15.4 Watts to power one PoDM (Class 0-3) PD (Powered Device) [11] Power over HDBaseT: IEEE 802.3at PoE compliant PSE (Power Sourcing Equipment), DM OUT port supplies up to 15.4 Watts to power one HDBaseT PoE (Class 0-3) PD (Powered Device) [11]

22 DMPS3-4K-100-C 3-Series 4K DigitalMedia Presentation System 100 MODELS & ACCESSORIES Available Models DMPS3-4K-100-C: 3-Series 4K DigitalMedia Presentation System 100 Available Accessories TT-100 Series: Crestron Connect It Cable Caddy TSW-760: 7 Touch Screen TSW-1060: 10.1 Touch Screen MP-B10: Media Presentation Button Panel B10 AM-101: AirMedia Presentation Gateway MP-AMP30: Media Presentation Audio Amplifier MP-AMP40 Series: Media Presentation Audio Amplifiers, 70 or 100 Volt AMP Series: Commercial Power Amplifiers DM-RMC-4K-100-C-1G: Wall Plate 4K DigitalMedia 8G+ Receiver & Room Controller 100 DM-RMC-4K-100-C: 4K DigitalMedia 8G+ Receiver & Room Controller 100 DM-RMC-4K-SCALER-C: 4K DigitalMedia 8G+ Receiver & Room Controller w/scaler DM-RMC-4K-SCALER-C-DSP: 4K DigitalMedia 8G+ Receiver & Room Controller w/scaler & Downmixing DM-RMC-200-C: DigitalMedia 8G+ Receiver & Room Controller 200 DM-RMC-SCALER-C: DigitalMedia 8G+ Receiver & Room Controller w/scaler USB-EXT-DM: USB over Ethernet Extender with Routing GLS-ODT-C-CN: Dual-Technology Occupancy Sensor with Cresnet GLS-OIR-C-CN: Passive Infrared Occupancy Sensor with Cresnet Crestron Fusion : Enterprise Management Platform Crestron App: Control App for Apple ios & Android XPanel: Crestron Control for Computers 3-Series BACnet /IP Support: 3-Series Native BACnet/IP Interface License CSP-LIR-USB: IR Learner STIRP: IR Emitter Probe w/3.5mm Mini Phone Plug CNSP-XX: Custom Serial Interface Cable DM-CONN-ULTRA-RECP: DigitalMedia Ultra Keystone RJ45 Jack DM-CBL-ULTRA-PC: DigitalMedia Ultra Patch Cables DM-CBL-ULTRA: DigitalMedia Ultra Cable DM-CONN: Connector for DM-CBL-ULTRA DM-CBL-8G: DigitalMedia 8G Cable DM-8G-CONN: Connector for DM-CBL-8G DM-8G-CRIMP: Crimping Tool for DM-8G-CONN DM-8G-CONN-WG: Connector with Wire Guide for DM-CBL-8G DM-8G-CRIMP-WG: Crimping Tool for DM-8G-CONN-WG CRESNET: Cresnet Control Cable CBL Series: Crestron Certified Interface Cables MP-WP Series: Media Presentation Wall Plates MPI-WP Series: Media Presentation Wall Plates - International Version Notes: 1. Item(s) sold separately. 2. The AirMedia Presentation Gateway, model AM-101, requires one HDMI input on the DMPS3-4K-100-C. 3. Some features and functions described in this spec sheet may not be supported using.av Framework. For a complete list of capabilities and options supported by.av Framework, please visit: 4. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately. 5. The VGA inputs can accept component, composite, and S-Video signals using an appropriate adapter (not included). However, input sync detection is not provided for composite or S-Video signal types. 6. When using an analog audio input in combination with an HDMI video input, the source s video resolution must be 1920x1200 or lower. The analog audio input will not pass audio if the source s video resolution is higher than 1920x Automatically passes 3D video if the display device supports it (reverts to pass-through mode without scaling). Provides automatic 3D-to-2D conversion (with scaling) if the display device does not support 3D. 8. Routing of a multichannel audio signal via a digital input and output (HDMI or DM) requires the input to be set for mixer bypass mode. When that input is selected, all audio controls on the digital output are disabled and the ability to route the microphone signal to that output is defeated. Mixer bypass mode also disables the Input Compensation control on that input. 9. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the DM 8G+ & HDBaseT Maximum Cable Lengths table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately. 10. License required. The DMPS3-4K-100-C supports a maximum of 500 BACnet objects when dedicated for BACnet use only. Actual capabilities are contingent upon the overall program size and complexity. 11. Due to the inherent power loss that occurs over CATx cable, a maximum of Watts is delivered at the PoDM or HDBaseT PoE powered device. Any wiring that is connected to a PoDM or HDBaseT PoE PSE port is for intra-building use only and should not be connected to a line that runs outside of the building in which the PSE is located. This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at or by calling The specific patents that cover Crestron products are listed online at: patents.crestron.com. Certain Crestron products contain open source software. For specific information, please visit Crestron, the Crestron logo, 3-Series, 3-Series Control System, AirMedia, Auto-Locking,.AV Framework, Cresnet, Crestron Connect It, Crestron Control, Crestron Fusion, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G+, QuickSwitch HD, and Smart Graphics are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/ or other countries. BACnet and the BACnet logo are either trademarks or registered trademarks of American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. in the United States and/or other countries. Apple, ipad, and iphone are either trademarks or registered trademarks of Apple Inc. in the United States and/or other countries. Blu-ray is either a trademark or registered trademark of the Blu-ray Disc Association in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS and DTS-HD are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. IOS is either a trademark or registered trademark of Cisco Technology, Inc. in the United States and/or other countries. Android is either a trademark or registered trademark of Google, Inc. in the United States and/or other countries. HDBaseT and the HDBaseT Alliance logo are either trademarks or registered trademarks of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice Crestron Electronics, Inc.

23 DMPS3-4K-100-C 3-Series 4K DigitalMedia Presentation System 100 Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ Tel: / Fax: All brand names, product names and trademarks are the property of their respective owners Crestron Electronics, Inc. Specifications subject to change without notice. Revised 05/08/17

24 DM-DA4-4K-C 1:4 4K HDMI to DM 8G+ & HDBaseT Splitter > > Converts and splits one HDMI input to four DM 8G+ outputs > > Single HDMI output enables cascading to additional units > > Supports 4K UHD and DCI 4K video at 60 Hz > > Handles Dolby TrueHD, Dolby Atmos, DTS-HD, DTS:X, and uncompressed 7.1 linear PCM audio > > Passes the AV signal to all outputs without change or degradation > > Simple setup, no programming required > > Compatible with HDBaseT certified equipment > > Selectable HDCP 2.2 or 1.4 compliance > > Supports PoDM+ and HDBaseT PoE+ power sourcing [1] > > Provides LAN connectivity for DM 8G+ receivers [2] > > Supports Ethernet over HDBaseT [2] > > Single-space, half-width 19-inch rack-mountable [4] > > Under-table mountable [4] > > Universal V external power pack included The DM-DA4-4K-C is a DigitalMedia accessory that converts and splits a single 4K60 HDMI signal to feed four separate DM 8G+ or HDBaseT receivers. A single HDMI output is included to pass the input through to a local display, audio processor, switcher, or another DM-DA4-4K-C. Video and audio are passed from the input to all five outputs simultaneously without any change or degradation. PoDM+ and HDBaseT PoE+ power sourcing is enabled at all four DM ports by adding a PoDM power supply (model PW-4830DUS or DM-PSU- 3X8-RPS, sold separately). This enables certain DM receivers and HDBaseT devices to receive power through the CATx cable, eliminating the need for a separate power supply at each endpoint location. [1] A Gigabit Ethernet port is included to provide a single-point LAN connection for all connected devices, including DM receivers and HDBaseT devices. Gigabit connectivity at the DM-DA4-4K-C ensures a full 100 megabit connection for each connected device. [2] HDCP is globally selectable on the DM-DA4-4K-C to support version 2.2, 1.4, or none. EDID functionality is configurable to either pass EDID to the input from the device connected to the first DM output port, or to use a pre-fined default EDID optimized for 1080p60. CEC signals are not passed through the DM-DA4-4K-C, although most DM receivers can support CEC through integration with a control system via Ethernet. [3] One or two DM-DA4-4K-C units can be rack-mounted in a single rack space using the ST-RMK rack mount kit. Installation beneath a table or counter is enabled using the UTK-1U-HALF under-table mounting kit. Both mounting kits are sold separately. Please refer to the DigitalMedia Resources Webpage at for additional design tools and reference documents. SPECIFICATIONS Video Input Signal Types: HDMI w/deep Color, 3D, & 4K (DVI & Dual-Mode DisplayPort compatible [6] ) Output Signal Types: DM 8G+ & HDBaseT w/deep Color, 3D, & 4K; HDMI w/deep Color, 3D, & 4K (DVI compatible [6] ) Maximum Resolutions: Scan Type Progressive Resolution 4096x2160 DCI 4K or 3840x2160 4K UHD Frame Rate Color Sampling Color Depth 24 Hz 4:4:4 30 bit 30 Hz 4:4:4 24 bit 30 Hz 4:2:2 36 bit 60 Hz 4:2:0 24 bit 2560x1600 WQXGA 60 Hz 4:4:4 36 bit 1920x1080 HD1080p 60 Hz 4:4:4 36 bit Interlaced 1920x1080 HD1080i 30 Hz 4:4:4 36 bit NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz Audio Input Signal Types: HDMI (Dual-Mode DisplayPort compatible [6] ) Output Signal Types: DM 8G+ & HDBaseT, HDMI Formats: Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels Communications Ethernet: 10/100/1000 Mbps, provides a single-point LAN connection for four DM or HDBaseT devices [2] USB: USB host for firmware update via USB mass storage device DigitalMedia: DM 8G+, HDCP 2.2 or 1.4 HDCP, EDID, CEC, PoDM, PoDM+, 100 Mbps Ethernet [1,2,3,7,8]

25 DM-DA4-4K-C 1:4 4K HDMI to DM 8G+ & HDBaseT Splitter DM-DA4-4K-C Front View DM-DA4-4K-C Rear View HDBaseT: HDBaseT Class A, HDCP 2.2 or 1.4 HDCP, EDID, PoE, PoE+, [1,2, 7,8] 100 Mbps Ethernet HDMI: HDCP 2.2 or 1.4 HDCP, EDID [7,8] Connectors LAN: (1) 8-pin RJ45 female; 10Base-T/100Base-TX/1000Base-T Ethernet port PoDM INPUT: (1) Combo D-Sub 7w2, male; 48 Volt DC power input for PoDM power supply [1] ; Enables PoDM+ power sourcing on each DM OUTPUT port SERVICE: (1) USB Type A female; Supports USB mass storage devices for firmware update 24VDC 1.25A: (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-2412WU power pack included HDMI INPUT: (1) 19-pin Type A HDMI female; HDMI digital video/audio inputs; (DVI & Dual-Mode DisplayPort compatible [6] ) HDMI OUTPUT: (1) 19-pin Type A HDMI female; HDMI digital video/audio output (DVI compatible [6] ) DM OUTPUT 1 4: (4) 8-pin RJ45 female, shielded; DM 8G+ outputs, HDBaseT compliant; PoDM+ PSE ports (HDBaseT PoE+ compatible) [1] ; Each connects to the DM 8G+ input of a DM receiver or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [5] Controls & Indicators PWR: (1) Bi-color green/amber LED, indicates operating power supplied from power pack, turns amber while booting and green when operating HDMI INPUT: (1) Bi-color green/amber LED, green indicates a source is detected with a video signal present at the HDMI INPUT port, amber indicates a source is detected without a video signal present HDMI OUTPUT: (1) Bi-color green/amber LED, green indicates a sink is detected and a video signal is being transmitted at the HDMI OUT port, amber indicates a sink is connected but a video signal is not being transmitted DM OUTPUT 1 4 (front): (4) Bi-color green/amber LED, green indicates a link is detected and a video signal is being transmitted at the corresponding DM OUTPUT port, amber indicates a link is detected but a video signal is not being transmitted LAN (rear): (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity EDID (rear): (1) 2-position slide switch, DEFAULT position sends a predefined EDID to the HDMI INPUT port [2-channel LPCM audio, 1920x1080@60Hz (preferred), 1920x1080@30Hz, 1280x720@60Hz, 720x480@60Hz], COPY 1ST position copies the EDID from a device connected to the HDMI OUTPUT 1 port to the HDMI INPUT port HDCP (rear): (1) 3-position slide switch, selects the HDCP version (OFF, 1.4, or 2.2) [7] SETUP (rear): (1) Red LED and (1) recessed pushbutton for firmware update DM OUTPUT 1 4 (rear): (8) LEDs, green LEDs indicate DM link status and amber LEDs indicate video and HDCP signal presence for each corresponding DM OUTPUT port Power Power Pack (included): Input: Volts AC, 50/60 Hz; Output: Volts DC; Model: PW-2412WU Power over DM (PoDM): IEEE 802.3at compliant PoDM+ PSE (Power Sourcing Equipment), each DM OUTPUT port supplies up to 30 Watts to power one PoDM (Class 0-3) or PoDM+ (Class 4) PD (Powered Device) [1] Power over HDBaseT: IEEE 802.3at PoE+ compliant PSE (Power Sourcing Equipment), each DM INPUT/OUTPUT port supplies up to 30 Watts to power one HDBaseT PoE or PoE+ PD (Powered Device) [1] PoDM Power Supply: Compatible with model PW-4830DUS or DM-PSU-3X8-RPS (each sold separately)

26 DM-DA4-4K-C 1:4 4K HDMI to DM 8G+ & HDBaseT Splitter Power Consumption: 102 Watts peak with four DM-RMC-4K-SCALER-C receivers connected and powered via PoDM; 33 Watts typical with four DM-RMC-4K-100-C receivers connected and powered via PoDM; 16 Watts idle with no connections Environmental Temperature: 32 to 104 F (0 to 40 C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: 346 BTU/hr peak with four DM-RMC-4K-SCALER-C receivers connected and powered via PoDM; 111 BTU/hr typical with four DM-RMC-4K-100-C receivers connected and powered via PoDM; 55 BTU/hr idle with no connections Enclosure Chassis: Metal, black finish, vented sides Front Panel: Metal, black finish with polycarbonate label overlay Mounting: Freestanding, under-table mountable, or 1 RU half-width 19-inch rack-mountable (adhesive feet included, under-table and rack mounting kits sold separately) Dimensions Height: 1.70 in (44 mm) Width: 7.07 in (180 mm) Depth: 9.19 in (234 mm) Weight 3.2 lb (1.5 kg) Maximum DM 8G+ & HDBaseT Cable Lengths Resolution: Cable Type: 1080p60 Full HD 1920x1200 WUXGA 1600x1200 UXGA 2048x1080 DCI 2K 2560x1440 WQHD 2560x1600 WQXGA 3840x2160 4K UHD 4096x2160 DCI 4K DM-CBL-ULTRA DM Ultra Cable 330 ft (100 m) DM-CBL-8G DM 8G Cable 330 ft (100 m) 230 ft (70 m) CAT5e (or better) [5] 330 ft (100 m) 165 ft (50 m) MODELS & ACCESSORIES Available Models DM-DA4-4K-C: 1:4 4K HDMI to DM 8G+ & HDBaseT Splitter Included Accessories PW-2412WU: Wall Mount Power Pack, 24VDC, 1.25A, 2.1mm, Universal (Qty. 1 included) Available Accessories ST-RMK: Rack Mount Kit UTK-1U-HALF: Under-Table Mounting Kit PW-4830DUS: 150W PoDM Power Pack DM-PSU-3X8-RPS: PoDM+ Redundant Power Supply DM-CBL-ULTRA-PC: DigitalMedia Ultra Patch Cables DM-CONN-ULTRA-RECP: DigitalMedia Ultra Keystone RJ45 Jack DM-CBL-ULTRA: DigitalMedia Ultra Cable DM-CONN: Connector for DM-CBL-ULTRA DM-CBL-8G: DigitalMedia 8G Cable DM-8G-CONN: Connector for DM-CBL-8G DM-8G-CRIMP: Crimping Tool for DM-8G-CONN DM-8G-CONN-WG: Connector with Wire Guide for DM-CBL-8G DM-8G-CRIMP-WG: Crimping Tool for DM-8G-CONN-WG CBL Series: Crestron Certified Interface Cables MP-WP Series: Media Presentation Wall Plates MPI-WP Series: Media Presentation Wall Plates - International Version Notes: 1. Enabling PoDM and PoE power sourcing requires an external power supply, model PW-4830DUS or DM-PSU-3X8-RPS, sold separately. Due to the inherent power loss that occurs over CATx cable, a maximum of 25.5 Watts is delivered at each PoDM+ or HDBaseT PoE+ powered device. Any wiring that is connected to a PoDM or PoE PSE port is for intrabuilding use only and should not be connected to a line that runs outside of the building in which the PSE is located. 2. With regard to Ethernet, the DM-DA4-4K-C effectively functions as a basic 5-port network switch to provide LAN connectivity for the connected DM and HDBaseT devices. This allows those devices to be addressed, controlled, and monitored by a Crestron control system. The DM-DA4-4K-C itself is not addressable and has no controllable functions. Please note, a model DM-RMC-4K-100-C-1G receiver cannot be controlled through its connection to the DM-DA4-4K-C, and thus will only function as a simple AV signal receiver. All other Crestron DM 8G+ receivers are fully controllable via Ethernet through the DM-DA4-4K-C. For HDBaseT devices, please consult the specifications for each device to determine its compatibility with Ethernet over HDBaseT. 3. CEC (Consumer Electronics Control) is a communications protocol used by many AV devices to enable remote control through an HDMI connection. CEC signals are not passed between the inputs and outputs on the DM-DA4-4K-C. However, Crestron DM 8G+ receivers can support CEC via an Ethernet connection to a control system through the DM-DA4-4K-C, which allows the control system to control devices through each receiver s HDMI output. Please note, model DM-RMC-4K-100-C-1G receivers do not support this capability when connected to the DM- DA4-4K-C. HDMI and HDBaseT devices cannot be controlled using CEC through the HDMI or DM ports on the DM-DA4-4K-C. 4. ST-RMK rack mount kit and UTK-1U-HALF under-table mounting kit each sold separately. 5. The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the Maximum DM 8G+ & HDBaseT Cable Lengths table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold

27 DM-DA4-4K-C 1:4 4K HDMI to DM 8G+ & HDBaseT Splitter separately. 6. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately. 7. The HDCP version selection affects all inputs and outputs globally. 8. EDID is handled between the DM OUTPUT 1 and HDMI INPUT connections only. Alternately, a pre-defined default can be selected. This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at or by calling The specific patents that cover Crestron products are listed online at: patents.crestron.com. Certain Crestron products contain open source software. For specific information, please visit Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, and DM 8G+ are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/ or other countries. HDBaseT and the HDBaseT Alliance logo are either trademarks or registered trademarks of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice Crestron Electronics, Inc. Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ Tel: / Fax: All brand names, product names and trademarks are the property of their respective owners Crestron Electronics, Inc. Specifications subject to change without notice. Revised 03/22/17

28 TSW Touch Screen > > Ultra clean, modern appearance > > Thin profile and compact footprint > > Affordable and easy to install > > 7 widescreen active-matrix color display > > 1024 x 600 WSVGA display resolution > > Capacitive touch screen technology > > Multi-touch capable > > Smart Graphics performance > > Backlit soft-touch capacitive buttons > > Any/all button hide feature > > Auto-brightness control > > Voice recognition capability [1,2] > > H.264 or MJPEG streaming video display > > Built-in 5 MP H.264 IP camera [2] > > Built-in microphone and speakers [2] > > Rava SIP intercom and phone technology [2] > > Native Sonos app > > Crestron Fusion room scheduling [4] > > Built-in PinPoint beacon [5] > > Customizable audio feedback > > Built-in web browsing [1] > > On-screen multi-language keyboard > > Customizable screensaver > > Single-wire Ethernet connectivity > > PoE or PoE+ network powered [4] > > US, UK, or European electrical wall box mounting > > Lectern mount over a rectangular cutout > > Retrofit and masonry mounting options available [6] > > Tabletop and swivel mount options available [3] > > Available in smooth black or white finish [2] Advanced Touch Screen Control A Crestron touch screen offers an ideal user-interface for controlling all the technology in your home, boardroom, classroom, courtroom, or command center. Touch screens simplify and enhance the way you use technology, doing away with those piles of remote controls, cluttered wall switches, disparate smartphone apps, and cryptic computer screens. For controlling audio, video, lighting, shades, HVAC, security, and other systems, Crestron touch screens are fully-customizable with easy-to-use controls and icons, true feedback and real-time status display, live streaming video, voice recognition, web browsing, and a full-featured media player for an enhanced multiroom entertainment experience. With its clean, contemporary design highlighted by edge-to-edge glass and stunning color graphics, the Crestron TSW-760 touch screen makes an elegant statement on any wall, tabletop or lectern. Perfectly at home in the most contemporary residence or modern office building, its high-tech good looks underline its power for simplifying everyday tasks and functions throughout any facility. The TSW-760 delivers the ultimate touch screen experience in an unobtrusive, space-saving design. It features a brilliant 7 inch capacitive touch screen display with Smart Graphics and 5 soft-touch buttons. PoE connectivity and a range of mounting options make installation a breeze for both new and retrofit applications. Additional advanced features include the abilities to control any function using voice commands, view security cameras and other video sources, communicate using built-in video intercom and phone capabilities, manage meeting room scheduling through Crestron Fusion, browse the Internet, and enjoy full access to your Sonos Home Sound System. [1] Smart Graphics Crestron touch screens use Smart Graphics to deliver the ultimate user experience and the ultimate value by enabling the creation of dynamically rich user interfaces with incredible efficiency and unparalleled functionality. Using Smart Graphics, programmers can swiftly integrate fluid gesturedriven controls, animated feedback, rich metadata, embedded apps and widgets, and full-motion video for a deeply engaging and ultra-intuitive touch screen experience. Crestron Smart Graphics offers these enhancements and more: Cool-looking graphical buttons, sliders, knobs, and gauges that are intuitive and fun to use Kinetic effects to enhance the feeling of realism, with lists and toolbars that scroll with momentum at the flick of a fingertip Drag-and-drop objects that snap into place, offering an easy way to switch sources Dashboard widgets to personalize the touch screen with clocks, weather, news, and other information [1] A power-saving screensaver that allows display of time, temperature, and other text content at a reduced brightness level

29 TSW Touch Screen TSW-760-W-S Shown in White Customizable themes allowing a completely different look and feel for every user, event, or season Fully-developed SmartObjects that enable sophisticated control over complex devices with minimal programming A consistent look and feel across multiple touch screens of varying sizes Soft-Touch Buttons The TSW-760 includes five backlit, soft-touch capacitive buttons for quick access to commonly used functions. These buttons are pre-labeled with icons for Power, Home, Lights, Up, and Down functions. Each button is programmable via the control system for custom functionality, and any unused button can be hidden by simply turning off its backlight. Auto-Brightness Control To ensure optimal visibility under varying lighting conditions, the TSW-760 includes a built-in light sensor, which regulates the brightness of the display and button backlighting according to the ambient light level in the room. Separate auto-brightness settings are provided for the display and buttons to allow each to be adjusted or defeated as needed. Voice Recognition Some things are easier said than done, so why not just say what you want and let Crestron do it for you? With built-in voice recognition, the TSW-760 provides the ability to use spoken commands to control virtually anything. Voice recognition can be used to quickly turn devices on or off, select and play a specific media title or playlist, change the channel, choose a lighting scene, lock the doors, arm the security system, or enter a password. Simply say a command and Crestron does the rest. [1,2] Streaming Video High-performance streaming video capability makes it possible to view security cameras and other video sources right on the touch screen. Native support for H.264 and MJPEG formats allows the TSW-760 to display live streaming video from an IP camera, a streaming encoder (Crestron CEN-NVS200, DM-TXRX-100-STR, or similar [3] ), or a DigitalMedia switcher. Video is delivered to the touch screen over Ethernet, eliminating the need for any extra video wiring. TSW-760-B-S with TSW-760-TTK-B-S Tabletop Kit Rava SIP Intercom Rava SIP Intercom Technology enables hands-free VoIP communication with other Rava-enabled touch screens and door stations. Rava works over Ethernet, supporting 2-way intercom, video intercom, and paging without requiring any special wiring. VoIP phone capability is also possible through integration with a SIP-compatible IP phone system or SIP server, allowing hands-free telephone functionality complete with speed-dialing, caller ID, custom ringers, and other enhancements. Built-in echo cancellation affords full-duplex performance for clear, seamless voice communication using the TSW-760 s integrated microphone and speakers. [2] Built-in Camera A 5 megapixel camera is built into the TSW-760 to support video intercom and room monitoring capabilities. This feature allows individuals to communicate both verbally and visually between two touch screens, or between one touch screen and a Rava-compatible video door station. It can also be used to visually monitor any room securely using an H.264 compatible decoder (Crestron DM-TXRX-100-STR, DM-RMC-100-STR, or similar [3] ) or a third-party video monitoring system. When not needed, the camera feature can be turned off programmatically through the control system. A no-camera model is also available. [2] Sonos App Merging technologies from Sonos and Crestron brings a whole-house music experience like no other. From any touch screen in the house, a family can effortlessly browse for tracks, artists, or playlists using all the services available from Sonos and instantly play them in any room using Sonos wireless speakers or a Crestron Sonnex Multiroom Audio System. The Sonos app runs natively on the TSW-760, enabling enhanced control of Sonos products as part of a complete Crestron system. The app checks for updates nightly so it s always current. [1] Room Scheduling (Coming Soon) The TSW-760 can provide an invaluable productivity tool for corporate enterprises and other organizations that use Crestron Fusion to manage room assets and schedule meetings. Mounted on the wall outside each room, the TSW-760 allows anyone to see at-a-glance if the room is

30 TSW Touch Screen available or in use, and to view details about the current meeting. A swipe of the finger reveals the room s entire schedule, displaying upcoming meetings and open time slots on a scrolling calendar ribbon, and allowing the room to be reserved right on the spot. Room scheduling functionality is enabled on the TSW-760 by loading the Room Scheduling SmartObject, which syncs with Crestron Fusion over the network. A Room Availability Hallway Sign (model SSW [3] ) can be added for enhanced visibility. [4] PinPoint Beacon (Coming Soon) The built-in PinPoint proximity detection beacon enhances the intelligence and personalization of a Crestron system by enabling an iphone or ipad device to always know what room it s in. It works with the Crestron App or Crestron PinPoint App, using Bluetooth technology to determine when the mobile device is in or near the same room as the beacon, and signals the mobile app to automatically display the appropriate controls and information for that location. [5] Web Browsing Using its built-in web browser, the TSW-760 provides quick access to online program guides and other web-based services at the touch of a button, allowing enhanced touch screen control of DVRs and other appliances without having to pick up a separate tablet or smartphone. If a device can be controlled or managed through a web browser, it can be integrated into the Crestron system through the TSW-760. Of course, the web browser may also be used to simply browse the Internet, check traffic conditions, or look up a recipe. [1] On-Screen Keyboard Typing in passwords, URLs, and text searches is facilitated using the on-screen multi-language keyboard. Multi-Touch Support The TSW-760 s capacitive touch screen affords enhanced capabilities for browsing web pages using multi-touch gestures. Audio Feedback Customized audio files can be loaded to add another dimension to the touch screen graphics using personalized sounds, button feedback, and voice prompts. Single-Wire Connectivity A simple Ethernet LAN connection is all that is required to wire the TSW-760, containing all control, video, intercom, and power signals within a single wire. Power over Ethernet Using PoE technology, the TSW-760 gets its operating power right through the LAN wiring. PoE (Power over Ethernet) eliminates the need for a local power supply or any dedicated power wiring. A PoE Injector (PWE-4803RU [3] ) simply connects in line with the LAN cable at a convenient location. Crestron PoE switches (CEN-SW-POE-5 or CEN-SWPOE-16 [3] ) may also be used to provide a total networking solution with built-in PoE. Note: The TSW-760 must be powered by a PoE+ power source if a SSW hallway sign is connected via USB. [4] Simple, Versatile Mounting Using the bracket provided, the TSW-760 is easily installed over a 2-gang or 3-gang electrical box, or a 2-gang European or UK electrical box. The same bracket allows for installation in a wooden lectern or podium over a rectangular cutout. When installed, the touch screen protrudes just 1/2 inch from the mounting surface and latches firmly into its mounting bracket leaving no visible screws for an ultra clean appearance. Additional mounting options are afforded using the TSW-UMB-60 Universal Mounting Bracket. By itself, the TSW-UMB-60 provides a post-construction solution for retrofitting the TSW-760 into existing drywall. For preconstruction applications that don t require a back box, the TSW-UMB-60 can be used along with a TSW-UMB-60-PMK Pre-Construction Mounting Kit. Masonry and concrete applications are accommodated using the TSW-UMB-60 along with a TSW-UMB-60-BBI back box. The TSW-UMB-60 is compatible with TSW-560, -760, and model touch screens, making it easy to change devices at any time without having to cut or patch the wall. [6] Secure Mounting Every TSW-760 includes an optional security latch for installations in which the physical security of the touch screen is important. When installed, the security latch ensures that a casual passerby cannot remove the TSW-760 from its mounted position in the wall. The latch can only be disengaged through a special removal sequence, protecting the touch screen against theft while still allowing serviceability where required. Tabletop Option Using the optional Tabletop Kit (TSW-760-TTK [3] ), the TSW-760 becomes a stylish, freestanding touch screen that fits perfectly on a table, desk, or countertop. It can even be permanently attached to the surface using the optional Swivel Mount Kit (TSW-560/760/1060-SMK [3] ). SPECIFICATIONS Touch Screen Display Display Type: TFT active matrix color LCD Size: 7 inch (178 mm) diagonal Aspect Ratio: 17:10 WSVGA Resolution: 1024 x 600 pixels Brightness: 350 nits (cd/m²) Contrast: 1100:1 Color Depth: 24-bit, 16.7M colors Illumination: Edgelit LED w/auto-brightness control Viewing Angle: ±80 horizontal, ±80 vertical Touch Screen: Projected capacitive, 5-point multi-touch capable Buttons Hard Keys: (5) Projected capacitive pushbuttons, backlit w/auto-brightness control, per-button show/hide (backlight enable/disable), pre-labeled with icons for Power, Home, Lights, Up, and Down Reset: (1) Miniature pushbutton on rear panel for hardware reset

31 TSW Touch Screen Graphics Engine Crestron Smart Graphics, multi-language web browser [1], multi-language on-screen keyboard, screensaver, single scalable streaming video window, native Sonos app [1], optional room scheduling SmartObject [4] Languages Smart Graphics: Arabic, Chinese (Simplified), Chinese (Traditional), Czech, Danish, Dutch, English (UK), English (US), Finnish, French, German, Greek, Hebrew, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Portuguese (Brazilian), Romanian, Russian, Slovak, Spanish, Swedish, Thai On-Screen Keyboard: Arabic, Chinese (Simplified), Croatian, Czech, Danish, Dutch, English (UK), English (US), Finnish, French (Canada), French (Switzerland), German, Hebrew, Hungarian, Italian, Japanese, Norwegian Bokmal, Polish, Portuguese, Russian, Serbian, Spanish, Swedish, Turkish Voice Recognition: Afrikaans (South Africa); Chinese, Mandarin (China, Simplified); Chinese, Mandarin (Hong Kong, Simplified); Chinese, Mandarin (Taiwan, Traditional); Chinese, Yue (Hong Kong, Traditional); Czech (Czech Republic); Dutch (Netherlands); English (Australia); English (Canada); English (Generic); English (India); English (New Zealand); English (South Africa); English (UK); English (US); French (France); German (Germany); isizulu (South Africa); Italian (Italy); Japanese (Japan); Korean (South Korea); Polish (Poland); Portuguese (Brazil); Russian (Russia); Spanish (Spain); Turkish (Turkey) Web Browser: Arabic, Bulgarian, Catalan, Chinese, Croatian, Czech, Danish, Dutch, English, Filipino, Finnish, French, German, Greek, Hebrew, Hindi, Hungarian, Indonesian, Italian, Japanese, Korean, Latvian, Lithuanian, Norwegian Bokmal, Pashto, Persian, Polish, Portuguese, Romanian, Romansh, Russian, Serbian, Slovak, Slovenian, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese Room Scheduling [4] : Chinese (Simplified), Chinese (Traditional), Danish, Dutch (Netherlands), English (US), English (UK), French, German, Hebrew, Italian, Japanese, Korean, Norwegian, Portuguese (Brazil), Portuguese (Portugal), Russian, Spanish, Swedish Memory RAM: 2 GB DDR3L Storage: Firmware/Application: 4 GB Class 10 microsd card; System: 4 GB emmc Maximum Project Size: 600 MB Communications Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), IEEE 802.1X, SNMP, IPv4 or IPv6, IEEE 802.3at compliant USB: USB 2.0 host for room availability hallway sign [3,4] Bluetooth: Crestron PinPoint proximity detection beacon [5] Streaming Decoder Video Formats: H.264 (MPEG-4 part 10 AVC), MJPEG Audio Formats: AAC stereo Bitrates: Up to 25 Mbps (20 Mbps maximum recommended) Streaming Input Resolutions: Up to 1920x1080@30fps Streaming Protocol: RTSP Streaming Encoder & Camera [2] Camera Resolution: 5.0 MP Field of View: 50º horizontal Video Format: H.264 (MPEG-4 part 10 AVC) Streaming Output Resolution: 1280x720 Streaming Protocol: RTSP Audio Features: Built-in microphone and speakers, Rava SIP Intercom, multilanguage voice recognition [1,2] Audio Feedback Formats: MP3 Connectors LAN PoE: (1) 8-pin RJ45 with 2 LED indicators; 10Base-T/100Base-TX Ethernet port, Power over Ethernet compliant [4] ; Green and yellow LEDs indicate Ethernet port status USB: (1) USB Type A female; USB 2.0 host port; For optional room availability hallway sign, model SSW [3,4] Power Power over Ethernet: Without USB device connected: IEEE 802.3at Type 1 (802.3af compatible) Class 3 (12.95 W) PoE Powered Device; With USB device connected: IEEE 802.3at Type 2 Class 4 (25.5 W) PoE+ Powered Device Environmental Temperature: 32 to 112 F (0 to 45 C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: 44 BTU/hr Enclosure Construction: Plastic, smooth black or white finish, edge-to-edge glass with black or white surround [2] Mounting: Surface mount over a 2 or 3-gang electrical box, 2-gang European (DIN 49073) electrical box, or 2-gang UK (BS 4662) electrical box; lectern mount over a 2-1/5 H x 3-3/4 W (56 mm H x 96 mm W) cutout; 1-3/8 (35 mm) minimum mounting depth; additional wall mount and tabletop options available separately Dimensions Height: 4.79 in (122 mm) Width: 4.79 in (122 mm) Depth: 1.52 in (39 mm) Dimensions do not include the mounting bracket

32 TSW Touch Screen Weight 14.1 oz (400 g) MODELS & ACCESSORIES Available Models TSW-760-B-S: 7 Touch Screen, Black Smooth TSW-760-W-S: 7 Touch Screen, White Smooth TSW-760-NC-B-S: 7 Touch Screen without Camera or Microphone, Black Smooth Available Accessories TSW-760-TTK: Tabletop Kit for TSW-760 TSW-560/760/1060-SMK: Swivel Mount Kit for TSW-760-TTK TSW-UMB-60: Universal Mounting Bracket for TSW-x60 Series TSW-UMB-60-PMK: Pre-Construction Mounting Kit for TSW-UMB-60 TSW-UMB-60-BBI: Wall Mount Back Box for TSW-UMB-60 PWE-4803RU: PoE Injector CEN-SW-POE-5: 5-Port PoE Switch CEN-SWPOE-16: 16-Port Managed PoE Switch CEN-NVS200: Network Video Streamer DM-TXRX-100-STR: HD Streaming Transmitter/Receiver DM-RMC-100-STR: HD Streaming Receiver & Room Controller 100 SSW: Room Availability Hallway Sign, Wall Mount Notes: 1. Voice recognition, web browsing, weather information, Sonos app, and certain other functions require an Internet connection. 2. The camera and microphone are included on models TSW-760-B-S and TSW-760-W-S only. To ensure privacy, the camera and microphone can be defeated programmatically at any time. For applications demanding an extra measure of privacy, Crestron offers the TSW-760-NC-B-S no camera model, which has no physical camera or microphone installed. The no camera model is only available in the smooth black finish. 3. Item(s) sold separately. 4. Room scheduling functionality and support for the SSW hallway sign via USB require the Room Scheduling SmartObject to be loaded on the touch screen. Certain functionality and hardware features are disabled when running the Room Scheduling SmartObject. The Room Scheduling SmartObject is not yet available. The touch screen must be powered by a PoE+ power source when a SSW hallway sign is connected via USB. 5. PinPoint beacon functionality will be enabled through a future firmware update. When enabled, the TSW-760 will provide an integrated, equivalent alternative to the standalone PP-100 beacon. For more details, refer to the PP-100 spec sheet. Bluetooth technology is used solely for proximity detection and does not transmit or receive any control, multimedia, or personal data. PinPoint beacons are only visible to Bluetooth enabled devices that are specifically programmed and configured to work with your system. PinPoint is currently only compatible with Apple ios devices. 6. The TSW-UMB-60, TSW-UMB-60-PMK, and TSW-UMB-60-BBI are all sold separately. The TSW-UMB-60 is also compatible with older TSW-UMB-PMK preconstruction mounting kits and TSW-550-BBI back boxes, allowing the TSW-760 touch screen to be installed in place of a previous generation TSW-5xx series touch screen, or any other device that was originally installed using the a TSW-UMB-PMK or TSW-550-BBI, without modification to the wall. This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at or by calling The specific patents that cover Crestron products are listed online at: patents.crestron.com. Certain Crestron products contain open source software. For specific information, please visit Crestron, the Crestron logo, Crestron Fusion, DigitalMedia, PinPoint, Rava, Smart Graphics, SmartObject, SmartObjects, and Sonnex are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Apple, ipad, and iphone are either trademarks or registered trademarks of Apple Inc. in the United States and/or other countries. Bluetooth is either a trademark or registered trademark of Bluetooth SIG, Inc. in the United States and/or other countries. IOS is either a trademark or registered trademark of Cisco Technology, Inc. in the United States and/or other countries. Sonos is either a trademark or registered trademark of Sonos, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice Crestron Electronics, Inc. Wall mounting bracket (included)

33 TSW Touch Screen Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ Tel: / Fax: All brand names, product names and trademarks are the property of their respective owners Crestron Electronics, Inc. Specifications subject to change without notice. Revised 05/03/17

34 TSW-760-TTK Tabletop Kit for TSW-760 > > Converts a TSW-760 to a stylish 7 tabletop touch screen > > Provides a 38 fixed operating angle > > Allows permanent mounting using the optional swivel mount kit [1] > > Provides the choice of a rear or bottom wire exit The TSW-760-TTK provides a stylish and convenient tabletop enclosure for a TSW-760 Touch Screen. The touch screen is angled when installed in the enclosure. The complete assembly may be placed on any flat, level surface. An optional swivel mount accessory (TSW-560/760/1060-SMK) is available separately and provides a means for permanently mounting the enclosure while retaining the ability to rotate it for optimal positioning. The swivel range can be customized using optional limit screws, with a maximum of 330-degree rotation allowed. The swivel mount may be installed on any flat table, desk, or counter top surface with a thickness of 1 inch (25 mm) minimum to 1-3/8 inch (35 mm) maximum. Wiring may be passed out the rear of the enclosure through a grommet and strain relief, or routed through the bottom for a very clean, cordless appearance. The rear wire opening can accommodate a single cable up to 1/4 inch (6 mm) diameter such as standard CAT5. The bottom opening measures 29/32 inch (23 mm) diameter, while the swivel mount [1] can accommodate wiring up to 11/16 inch (17 mm) diameter SPECIFICATIONS Enclosure Plastic, black or white; 38 fixed angle device opening; freestanding or swivel mount installation [1] Dimensions Height: 3.49 in (89 mm), 3.62 in (92 mm) with swivel mount [1] Width: 7.40 in (188 mm) Depth: 4.31 in (110 mm) With touch screen installed: Height: 4.10 in (104 mm), 4.23 in (108 mm) with swivel mount [1] Width: 7.62 in (194 mm) Depth: 4.45 in (113 mm) Available Accessories TSW-560/760/1060-SMK: Swivel Mount Kit for TSW-560-TTK, TSW-760-TTK & TSW-1060-TTK Notes: Shown with TSW-760 Touch Screen (Sold Separately) 1. TSW-560/760/1060-SMK Swivel Mount Kit sold separately. This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at or by calling The specific patents that cover Crestron products are listed online at: patents.crestron.com. Certain Crestron products contain open source software. For specific information, please visit Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice Crestron Electronics, Inc. Weight 12.8 oz (363 g), 26.9 oz (763 g) with touch screen installed MODELS & ACCESSORIES Available Models TSW-760-TTK-B-S: Tabletop Kit for TSW-760, Black Smooth TSW-760-TTK-W-S: Tabletop Kit for TSW-760, White Smooth

35 TSW-760-TTK Tabletop Kit for TSW-760 CAD DRAWINGS Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ Tel: / Fax: All brand names, product names and trademarks are the property of their respective owners Crestron Electronics, Inc. Specifications subject to change without notice. Revised 11/14/16

36 TSW-UMB-60 Universal Mounting Bracket for TSW-x60 Series The TSW-UMB-60 provides an easy in-wall mounting solution for a Crestron TSW-560, TSW-760, or TSW-1060 touch screen. Because it fits all three touch screen models, it allows the touch screen device to be changed at any time without having to cut or patch the wall. It can even be installed before the touch screen model and screen size has been selected. The TSW-UMB-60 is also compatible with the TSW-560P touch screen when mounted in a portrait orientation. Note: Model TSW-560 and TSW-560P touch screens each ship with one TSW-UMB-60 included. By itself, the TSW-UMB-60 provides a post-construction solution for retrofitting the touch screen into existing drywall. It is also suitable for use in a lectern or podium. For pre-construction wall mount applications, the TSW-UMB-60 can be used along with a TSW-UMB-60-PMK or TSW-UMB-560P-PMK Pre-Construction Mounting Kit. Masonry and concrete applications are accommodated using the TSW-UMB-60 along with a TSW-UMB-60-BBI back box. [1] SPECIFICATIONS Construction Metal bracket and clamp assembly Mounting Required Cut-Out: 2-1/5 in (56 mm) high x 3-3/4 in (96 mm) wide Maximum Surface Thickness: 1-1/4 in (32 mm) Minimum Mounting Depth: 2-13/16 in (72 mm) Pre-Construction Options: TSW-UMB-60-PMK (landscape) or TSW-UMB- 560P-PMK (portrait) Pre-Construction Mounting Kits [1] Masonry Back Box Option: TSW-UMB-60-BBI Wall Mount Back Box [1] NOTE: Consult the installation manual for each device for additional clearances and complete mounting instructions. MODELS & ACCESSORIES Notes: 1. The TSW-UMB-60-PMK is sold separately or as included with the TSW-560. The TSW-UMB- 560P-PMK is sold separately or as included with the TSW-560P. The TSW-UMB-60-BBI is only sold separately. The TSW-UMB-60 is also compatible with older TSW-UMB-PMK preconstruction mounting kits and TSW-550-BBI back boxes, allowing a TSW-x60 series touch screen to be installed in place of a previous generation TSW-5xx series touch screen, or any other device that was originally installed using the a TSW-UMB-PMK or TSW-550-BBI, without modification to the wall. This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at or by calling The specific patents that cover Crestron products are listed online at: patents.crestron.com. Certain Crestron products contain open source software. For specific information, please visit Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice Crestron Electronics, Inc. Available Models TSW-UMB-60: Universal Mounting Bracket for TSW-x60 Series Available Accessories TSW-UMB-60-PMK: Pre-Construction Mounting Kit for TSW-UMB-60 TSW-UMB-560P-PMK: Portrait-Oriented Pre-Construction Mounting Kit for TSW-UMB-60 TSW-UMB-60-BBI: Wall Mount Back Box for TSW-UMB-60

37 TSW-UMB-60 Universal Mounting Bracket for TSW-x60 Series Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ Tel: / Fax: All brand names, product names and trademarks are the property of their respective owners Crestron Electronics, Inc. Specifications subject to change without notice. Revised 05/03/17

38 TT-100 Crestron Connect It Cable Caddy > > Simple-to-use tabletop presentation interface > > Stylish, unimposing design > > Simple one-touch toggling between multiple presenters > > Soft-touch capacitive buttons with multicolored status indicators > > Convenient left or right hand access > > Recessed cable storage compartment > > Available with or without cables > > Optional 120 Volt AC power outlet > > 4K and Ultra HD compatible > > Compact and easy to install > > Available in black or gray textured > > Integrates with DigitalMedia and other systems > > Complete system solutions available with no programming required TT-101-B-T model shown Crestron Connect It offers a cost-effective, simple-to-use presentation solution that provides connectivity, cable management, and one-touch control, all in one stylish tabletop device that s remarkably easy to install. Using a Crestron Connect It Cable Caddy (TT-100 Series), anyone can easily connect their laptop, tablet, or smartphone device and instantly start presenting. Multiple cable caddies can be deployed across any sized table to enable natural, free-flowing collaboration amongst several participants in a huddle room, conference room, council chamber, or training lab. Simple one-touch control at each cable caddy makes toggling between sources effortless. Four Crestron Connect It Cable Caddy models are available: TT-100 Includes a 120 Volt outlet and space for four customersupplied cables TT-101 Includes a 120 Volt outlet plus HDMI, VGA, Audio, and Ethernet cables TT-110 Provides space for four customer-supplied cables; no outlet TT-111 Includes HDMI, VGA, Audio, and Ethernet cables; no outlet Connect to Present, Tap to Switch Starting a presentation and switching between presenters is incredibly easy and intuitive. To begin, simply connect a source and the room display automatically turns on and displays that source. With a simple tap of the finger, any other presenter can take over the presentation at any time via a pair of soft-touch capacitive buttons, conveniently positioned for left or right hand access. Multi-colored lights surrounding each button clearly indicate when a source is connected and ready, and when that source is being displayed. A Personal Connection Stowed neatly within its recessed storage compartment, the Crestron Connect It Cable Caddy provides four easy pull-out interface cables for HDMI, VGA, Audio, and Ethernet. Custom cables can also be accommodated, and select models include a single AC power outlet. The Hole Thing Mounting the cable caddy device requires just a 4 inch (102 mm) round hole through the tabletop surface. The device is secured in place with a single twist-on locking ring, which features three lock-down screws to prevent the device from coming loose. The Whole Package A complete Crestron Connect It collaboration solution is incredibly easy to specify and install. A single presentation switcher mounts conveniently under the table to enable automatic switching for up to four TT-100 series cable caddies. It can also provide control and connectivity for the room s display device along with a host of other features and functions, all without requiring any custom programming. Three presentation switcher options are available including the HD-MD8X1-4K 4K Scaling Presentation Switcher, the DM-MD8X1-4K-C 4K Scaling Presentation Switcher w/hdbaset Output, and the DMPS3-4K-150-C 3-Series 4K DigitalMedia Presentation System 150. Just add a Crestron sound bar (CCS-SPK-SB-100), or an MP-AMP30 or MP-AMP40 amplifier with Saros speakers for a total huddle room collaboration solution. [1] Other system configurations are possible using any Crestron DMPS3 system or DigitalMedia switcher. Integration with a Crestron Control System is enabled directly via Cresnet, or through a DM 8G+ transmitter via USB. A DM 8G+ transmitter offers a long-distance, single-wire interface with auto-switching inputs for a single TT-100 series cable caddy. [2,3]

39 TT-100 Crestron Connect It Cable Caddy SPECIFICATIONS Controls & Indicators Connect It Buttons: (2) Soft-touch capacitive buttons; Press either button to select the connected video source for viewing on a display device Connect It Indicators: (2) Multicolored LED indicators: Blue (solid) Indicates no video source is connected Green (blinking) Indicates a video source is connected and the display device is powering up Green (solid) Indicates the connected video source is selected for viewing on the display device Green (slow pulse) Indicates a video source is connected but not currently selected for viewing Red (blinks 5 times) Indicates one of the Connect It buttons has been pressed but no video source is connected Communications Cresnet : Cresnet slave mode USB: USB OTG port for interfacing with select Crestron devices including: DMPS3-4K-150-C, DM-MD8X1-4K-C, HD-MD8X1-4K, DM-TX-4K-202-C, DM-TX-4K-302-C, DM-TX-401-C, or DM-TX-201-C [3] Connections Top Cable Storage Compartment: Provides pass-thru holes for up to four cables; Models TT-101 and TT-111 include the following cables: HDMI, Type A, 6 ft (1.8 m) VGA, HD15, 6 ft (1.8 m) Stereo Audio, 3.5mm TRS, 6 ft (1.8 m) LAN, Shielded CAT5e, RJ45, 7 ft (2.1 m) AC Power Outlet (TT-100 & TT-101 only): (1) NEMA 5-15R grounded AC power receptacle; Maximum Load: Volts AC, 50/60 Hz Connections Bottom Panel NET: (1) 4-pin 3.5 mm detachable terminal block; Cresnet slave port USB: (1) USB Type mini-ab female, USB OTG port; Includes a 6.5 ft (2 m) mini-b to A USB cable for connection to a DMPS3-4K-150-C, DM-MD8X1-4K-C, HD-MD8X1-4K, DM-TX-4K-202-C, DM-TX-4K-302-C, or DM-TX-401-C; Includes a 6 ft (1.8 m) mini-a to B USB cable for connection to a DM-TX-201-C [3] Utility Power (TT-100 & TT-101 only): (1) 9 ft (2.7 m) AC line cord with NEMA 5-15P grounded plug; Passes through to front panel AC power outlet Environmental TT-111-GRY-T Shown with cables installed Temperature: 32 to 112 F (0 to 45 C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: <0.05 BTU/hr Construction Housing: Plastic Mounting: Flush tabletop mount in a 4 inch (102 mm) round hole, 1/2 to 1-1/4 inch (13 to 32 mm) surface thickness Dimensions Height: 3.76 in (96 mm) Diameter: 4.71 in (120 mm); 5.90 in (150 mm) with locking ring Weight 15.3 oz (433 g) without cables Power Requirements Cresnet Power Usage: 1.2 Watts ( Volts DC) USB: 5 Volts DC, draws power from USB if Cresnet power is not connected, and only when connected to a USB host port [3] Utility Power (TT-100 & TT-101 only): 10 Amps at 125 Volts AC 50/60Hz

40 TT-100 Crestron Connect It Cable Caddy MODELS & ACCESSORIES Available Models TT-100-B-T: Crestron Connect It Cable Caddy w/120v Outlet, No Cables, Textured Black TT-100-GRY-T: Crestron Connect It Cable Caddy w/120v Outlet, No Cables, Textured Gray TT-101-B-T: Crestron Connect It Cable Caddy w/cables & 120V Outlet, Textured Black TT-101-GRY-T: Crestron Connect It Cable Caddy w/cables & 120V Outlet, Textured Gray TT-110-B-T: Crestron Connect It Cable Caddy, No Cables or Outlet, Textured Black TT-110-GRY-T: Crestron Connect It Cable Caddy, No Cables or Outlet, Textured Gray TT-111-B-T: Crestron Connect It Cable Caddy w/cables, No Outlet, Textured Black TT-111-GRY-T: Crestron Connect It Cable Caddy w/cables, No Outlet, Textured Gray Available Accessories HD-MD8X1-4K: 4K Scaling Presentation Switcher DM-MD8X1-4K-C: 4K Scaling Presentation Switcher w/hdbaset Output DMPS3-4K-150-C: 3-Series 4K DigitalMedia Presentation System 150 DM-TX-4K-302-C: 4K DigitalMedia 8G+ Transmitter 302 DM-TX-4K-202-C: 4K DigitalMedia 8G+ Transmitter 202 DM-TX-401-C: DigitalMedia 8G+ Transmitter 401 DM-TX-201-C: DigitalMedia 8G+ Transmitter 201 PW-2407RU: 18 Watt Cresnet Power Supply, US/International CBL-Series: Crestron Certified Interface Cables Notes: 1. Item(s) sold separately. 2. Compatible DM 8G+ Transmitters include the DM-TX-4K-202-C, DM-TX-4K-302-C, DM-TX- 401-C, and DM-TX-201-C, all sold separately. 3. The DM-TX-201-C does not have a USB host port. It has a USB device port, which does not supply USB power. When connected to a DM-TX-201-C, the cable caddy must be powered through a connection to a Cresnet network or power supply. The PW-2407RU 18 Watt Cresnet Power Supply (sold separately) is available to power multiple cable caddies. This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at or by calling The specific patents that cover Crestron products are listed online at: patents.crestron.com. Certain Crestron products contain open source software. For specific information, please visit Crestron, the Crestron logo, 3-Series, Crestron Connect It, Cresnet, DigitalMedia, DigitalMedia 8G+, DM 8G+, HDBaseT, and Saros are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. HDMI is either a trademark or registered trademark of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice Crestron Electronics, Inc.

41 TT-100 Crestron Connect It Cable Caddy TT-100 TT-110 Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ Tel: / Fax: All brand names, product names and trademarks are the property of their respective owners Crestron Electronics, Inc. Specifications subject to change without notice. Revised 02/12/16

42 ST-RMK Rack Mount Kit for 1RU Half-Width Devices The ST-RMK is a single-space rack mount kit designed to accommodate one or two Crestron 1RU half-width devices. Such devices include certain DigitalMedia transmitters, radio tuners, and control modules. The ST-RMK includes (1) black metal rack mount tray, (1) half-width front filler plate and bracket, and additional device mounting hardware. It provides a complete solution for mounting either a single device or two side-by-side devices in a single 19-inch EIA rack space. Notes: This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at or by calling The specific patents that cover Crestron products are listed online at: patents.crestron.com. Crestron, the Crestron logo, and DigitalMedia are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice Crestron Electronics, Inc. SPECIFICATIONS Dimensions Height: 1.70 in (44 mm) Width: in (483 mm) Depth: 5.02 in (128 mm) Weight 2.4 lb (1.1 kg) MODELS Available Models ST-RMK: Rack Mount Kit for 1RU Half-Width Devices Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ Tel: / Fax: Specifications subject to change without notice. Revised 06/26/15