LCD TV PLASMA TV OWNER S MANUAL

Transcription

1 LCD TV PLASMA TV OWNER S MANUAL LCD TV MODELS 7LF6* 7LY9* LF6* LY9* 7LF6* 7LY9* 5LF6* 5LY9* 7LF7* LF7* PLASMA TV MODELS 50PF9* 60PF9* Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. Trade Mark of the DVB Digital Video Broadcasting Project (99 to 996) ID Number(s): 560: 7LY95 56: 7LF65 5: LY95 60: 7LY96 558: 7LY95 606: 7LY96 57: LF65 608: 7LF66 605: LY96 60: 7LF66 607: 5LY96 6: 5LF66 609: LF66 6: 50PF96 6: 5LF65 7: 7LF75 75: LF75 9: LY99 65: 60PF96 965: 50PF95(50PF95-ZJ) 55: 60PF95 6: 50PF95 (50PF95-ZA) 55: 7LF65 50: 7LF76 5: LF76

2

3 ? i Owner s manual I/II TV POWER? D/A ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product. Owner's Manual Owner s Manual Power Cord Batteries ACCESSORIES SIZE TIME REVEAL LIST UPDATE INDEX HOLD 9 Q.VIEW TEXT RATIO SLEEP PICTURE D/A INPUT SOUND DVD SUBTITLE TV/RADIO VCR or SUBTITLE UPDATE LIST SLEEP HOLD REVEAL INDEX Q.VIEW TIME SIMPLINK TEXT TV/RADIO INPUT MODE POWER TV INPUT BRIGHT RATIO I/II DVD VCR Polishing Cloth Polish the screen with the cloth. Slightly wipe stained spot on the exterior only with the cleansing cloths for the product exterior if there is stain or fingerprint on surface of the exterior. Do not wipe roughly when removing stain. Please be cautious of that excessive power may cause scratch or discoloration. Remote Control Plasma TV models 50PF9* only This feature is not available for all models. This feature is not available for all models. 60PF9* only One desk-type stand fixture protection cover Refer to p. 5 -bolts Refer to p. 5 -Wall brackets -eye-bolts - TV Brackets - Wall Brackets -bolts Two rubber caps Refer to p. 5 LCD TV models This feature is not available for all models. 7 only 7LF7* only - TV Brackets - Wall Brackets Twister Holder Arrange the wires with the twister holder. or -bolts for stand assembly Refer to p. 0 -screw for stand fixing Refer to p. 0 -bolts Cable Management

4 CONTENTS CONTENTS ACCESSORIES EPARATION Front Panel Controls... Back Panel Information... 7 Stand installation... 0 ATTACHING THE TV TO A DESK...0 Attaching the TV to a wall... Back Cover for Wire Arrangement... Desktop Pedestal Installation... 5 Wall Mount: Horizontal installation... 5 Antenna Connection... 6 EXTERNAL EQUIPMENT SETUP HD Receiver Setup DVD Setup Insertion of CI module VCR Setup Digital Audio Out Setup Other A/V Source Setup PC Setup Screen Setup for PC Mode WATCHING TV / OGRAMME CONTROL Remote Control Key Functions Turning on the TV Programme Selection Volume Adjustment On Screen Menus Selection and Adjustment Auto Programme Tuning (In Digital Mode)..... Manual Programme Tuning (In Digital Mode)... Programme Edit (In Digital Mode) V antenna Power (In Digital Mode only) Software Update (In Digital Mode only) Diagnostics (In Digital Mode only) CI Information (In Digital Mode only) Auto Programme Tuning (In Analogue Mode) Manual Programme Tuning (In Analogue Mode) Fine Tuning (In Analogue Mode) Assigning a Station Name (In Analogue Mode) Programme Edit (In Analogue Mode) Calling the Programme Table Input Source Selection Index SIMPLINK PICTURE CONTROL EPG (Electronic programme guide) (In Digital Mode) - Switch on/off EPG Select a programme Button function in NOW/NEXT guide mode Button function in 8 days guide mode Button function in date change mode Button function in extended description box Button function in record/remind setting mode Button function in timer list mode Picture Size (Aspect Ratio) Control Preset Picture Settings - Picture Mode-Preset Auto Colour Tone Control (Warm/Medium/Cool)... 6 Manual Picture Adjustment - Picture Mode-User option Colour Tone - User option XD - Picture Improvement Technology XD Demo TruMotion Demo Advanced - Cinema Advanced - TruMotion Advanced - Black(Darkness) Level Picture Reset Image Sticking Minimization(ISM) Method Low-Power Picture Mode

5 SOUND & LANGUAGE CONTROL DIGITAL TELETEXT Auto Volume Leveler Preset Sound Settings - Sound Mode Sound Setting Adjustment - User Mode Balance TV Speakers On/ Off Setup Selecting digital audio out I/II - Stereo/Dual Reception (In Analogue Mode Only) NICAM Reception (In Analogue Mode Only) Speaker Sound Output Selection On-Screen Menu Language/Country Selection Language selection (In Digital Mode only) Teletext within Digital Service Teletext in Digital Service APPENDIX Troubleshooting Maintenance Product Specifications Programming the Remote Control IR Codes External Control Device Setup CONTENTS TIME SETTING Clock Setup Auto On/ Off Timer Setting Auto Shut-off Setting Time Zone Setup Sleep Timer Setting PARENTAL CONTROL / RATINGS Set Password & Lock System Parental Control TELETEXT Switch on/off SIMPLE Text TOP Text FASTEXT Special Teletext Functions

6 EPARATION FRONT PANEL CONTROLS A A This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth. Plasma TV Models: 50PF9*, 60PF9* EPARATION Remote Control Sensor INPUT Power/Standby Indicator illuminates red in standby mode. SWIVEL STAND (Only PLASMA TV MODELS) POWER Button After installing the TV, you can adjust the TV set manually to the left or right direction by 0 degrees to suit your viewing position. INPUT Button! Button Button NOTE OGRAMME Buttons UME Buttons G Before adjusting the angle, you must remove the cable management and loosen (to the left) the shaft bolt on the middle of stand s back. And when stand be level with TV, you must close (to the right) the shaft bolt to set the hole.

7 LCD TV Models: 7LF6*, LF6*, 7LF6*, 5LF6* OGRAMME Buttons EPARATION UME Buttons Button Button INPUT INPUT Button /I POWER Button Intelligent Eye Adjusts picture according to the surrounding conditions. Remote Control Sensor Power/Standby Indicator illuminates red in standby mode. illuminates green when the set is switched on. 5

8 EPARATION LCD TV Models: 7LY9*, LY9*, 7LY9*, 5LY9* OGRAMME Buttons EPARATION INPUT UME Buttons Button Button INPUT Button POWER Button Intelligent Eye Adjusts picture according to the surrounding conditions. Remote Control Sensor Power/Standby Indicator illuminates red in standby mode. illuminates green when the set is switched on. LCD TV Models: 7/LF7* INPUT /I OGRAM Buttons UME Buttons Button Button INPUT Button POWER Button Intelligent Eye Adjusts picture according to the surrounding conditions. Remote Control Sensor Power/Standby Indicator illuminates red in standby mode. illuminates green when the set is switched on. 6

9 PANEL INFORMATION A This is a simplified representation of the back panel. Here shown may be somewhat different from your TV. Plasma TV Models AV IN L/MONO AUDIO R VIDEO S-VIDEO S-Video Input Connect S-Video out from an S-VIDEO device. Audio/Video Input Connect audio/video output from an external device to these jacks. EPARATION 9 PCMCIA CARD SLOT EJECT HDMI/DVI IN HDMI IN RGB (PC) RGB IN AUDIO (RGB/DVI) AV AV ANTENNA IN DIGITAL AUDIO OUT VIDEO AUDIO OPTICAL COMPONENT IN RS-C IN (CONTROL & SERVICE) 5 PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.) HDMI Input Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. RGB/DVI Audio Input Connect the monitor output from a PC to the appropriate input port. Antenna Input Connect over-the-air signals to this jack DIGITAL AUDIO OUT OPTICAL Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work RS-C IN (CONTROL & SERVICE) PORT Connect to the RS-C port on a PC. Component Input Connect a component video/audio device to these jacks. Euro Scart Socket (AV/AV) Connect scart socket input or output from an external device to these jacks. Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 7

10 EPARATION LCD TV Models (Except 7/LF7*) EPARATION PCMCIA CARD SLOT EJECT ANTENNA IN HDMI/DVI IN HDMI IN OPTICAL DIGITAL AUDIO OUT VIDEO RGB IN RGB(PC) AUDIO IN (RGB/DVI) COMPONENT IN AUDIO AV AV L/MONO AUDIO R S-VIDEO RS-C IN (CONTROL & SERVICE) VIDEO AV IN L/MONO AUDIO R VIDEO S-VIDEO AV IN AV IN VIDEO L/MONO AUDIO R S-VIDEO S-Video Input Connect S-Video out from an S- VIDEO device. Audio/Video Input Connect audio/video output from an external device to these jacks. PCMCIA CARD SLOT EJECT HDMI/DVI IN HDMI IN HDMI IN ANTENNA IN RS-C IN (CONTROL & SERVICE) RGB(PC) RGB IN OPTICAL AUDIO IN (RGB/DVI) VIDEO AUDIO COMPONENT IN DIGITAL AUDIO OUT 6 7 AV AV 8 PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.) HDMI Input Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. RGB/DVI Audio Input Connect the monitor output from a PC to the appropriate input port. Antenna Input Connect over-the-air signals to this jack RS-C IN (CONTROL & SERVICE) PORT Connect to the RS-C port on a PC. Component Input Connect a component video/audio device to these jacks. Euro Scart Socket (AV/AV) Connect scart socket input or output from an external device to these jacks. Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 5 DIGITAL AUDIO OUT OPTICAL Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. 8

11 LCD TV Models : 7/LF7* L/MONO AUDIO R VIDEO S-VIDEO AV IN S-Video Input Connect S-Video out from an S- VIDEO device. Audio/Video Input Connect audio/video output from an external device to these jacks. EPARATION 9 PCMCIA CARD SLOT EJECT HDMI/DVI IN HDMI IN HDMI IN ANTENNA IN RS-C IN (CONTROL & SERVICE) RGB(PC) RGB IN OPTICAL DIGITAL AUDIO OUT AUDIO IN (RGB/DVI) AV AV VIDEO COMPONENT IN AUDIO PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.) 6 Component Input Connect a component video/audio device to these jacks. HDMI Input Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. DIGITAL AUDIO OUT OPTICAL Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. Antenna Input Connect over-the-air signals to this jack RGB/DVI Audio Input Connect the monitor output from a PC to the appropriate input port. Euro Scart Socket (AV/AV) Connect scart socket input or output from an external device to these jacks. Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. 5 RS-C IN (CONTROL & SERVICE) PORT Connect to the RS-C port on a PC. 9

12 EPARATION STAND INSTALLATION (Only 7 inch LCD TV Models) Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. EPARATION Assemble the product stand with the product as shown. Install the bolts securely, in the back of the product in the holes provided. ATTACHING THE TV TO A DESK (Only 7LF7*) The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. -screw Stand Desk! WARNING G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury. 0

13 ATTACHING THE TV TO A WALL This feature is not available for all models. A Set it up close to the wall so the product doesn t fall over when it is pushed backwards. A The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall. Please make sure that children don t climb on or hang from the product. EPARATION or Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall. Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.! NOTE G When moving the product to another place undo the ropes first. G Use a product holder or a cabinet that is big and strong enough for the size and weight of the product. G To use the product safely make sure that the height of the bracket that is mounted on the wall is same as that of the product.

14 EPARATION COVER FOR WIRE ARRANGEMENT Plasma TV models EPARATION Hold the CABLE MANAGEMENT with both hands and pull it as shown. 5 CABLE MANAGEMENT Connect the cables as necessary. To connect an additional equipment, see the External equipment Connections section. Reinstall the CABLE MANAGEMENT as shown.

15 LCD TV models (Except 7/LF7*) Connect the cables as necessary. To connect an additional equipment, see the External equipment Connections section. EPARATION Install the CABLE MANAGEMENT as shown. CABLE MANAGEMENT Bundle the cables using the supplied twister holder. (This feature is not available for all models.) How to remove the cable management Hold the CABLE MANAGEMENT with both hands and pull it upward.! NOTE G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken.

16 EPARATION LCD TV model (Only 7/LF7*) EPARATION Connect the cables as necessary. To connect an additional equipment, see the External equipment Connections section. Install the CABLE MANAGEMENT as shown. (Insert it as pushing the loops on the both sides of the cable management.) Bundle the cables using the supplied twist holder. (This feature is not available for all models.) CABLE MANAGEMENT How to remove the cable management Hold the CABLE MANAGEMENT with both hands and pull it out. (Pull it out as holding the loops on the both sides of the cable management.)! NOTE G Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken.

17 R The set can be installed in various ways such as on a wall, or on a desktop etc. The set is designed to be mounted horizontally. GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of " on each side and from the wall. inches EPARATION inches inches inches When not using the desk-type stand (60PF9* only ) Rubber cap When not using the desk-type stand, install the supplied rubber caps for protecting the desk-type stand fixture as shown at the figure. WALL MOUNT: HORIZONTAL INSTALLATION For proper ventilation, allow a clearance of " on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. inches inches inches inches inches If you want to install the desk-type stand fixture protection cover (Plasma TV models only) Bolts To prevent the foreign materials from entering the desk-type stand fixture, fix the desk-type stand fixture protection cover by using the supplied bolts as shown at the figure. Desk-type stand fixture protection cover 5

18 EPARATION To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied. S-VIDEO EPARATION Wall Antenna Socket Multi-family Dwellings/Apartments (Connect to wall antenna socket) HDMI IN RGB IN ANTENNA IN Outdoor Antenna (VHF, UHF) RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) - Be careful not to bend the bronze wire when connecting to an antenna port. - 5V antenna power works In Digital mode only. (Refer to p. 5) Antenna UHF Signal Amplifier ANTENNA IN VHF In poor signal areas,to get better picture quality, install a signal amplifier to the antenna as shown to the right. If signal needs to be split for two TVs,use an antenna signal splitter for connection. 6

19 EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.however,if you do receive Digital signals from a digital set-top box or other digital external device,refer to the figure as shown below. When connecting with a component cable Connect the video outputs (Y, PB, ) of the digital set top box to the COMPONENT IN VIDEO jacks on the set. Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the set. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select COMPONENT input source with using the INPUT button on the remote control. HDMI IN RGB IN RGB(PC) AUDIO IN (RGB/DVI) A EXTERNAL EQUIPMENT SETUP AL DIGITAL AUDIO OUT VIDEO COMPONENT IN AUDIO Signal 80i/576i 80p/576p 70p/080i 080p Component Yes Yes Yes Yes (60Hz only) HDMI/ No Yes Yes Yes (Hz/50Hz/60Hz) HDMI (Only 7/LF7*, LY99) No Yes Yes Yes (Hz/50Hz/60Hz) 7

20 When connecting with a HDMI cable Except 7/LF7*, LY99 EJECT HDMI/DVI IN HDMI IN RGB IN RGB(PC) AUD (RG EXTERNAL EQUIPMENT SETUP Connect the digital set-top box to HDMI/DVI IN or HDMI IN jack on the set. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select HDMI or HDMI input source with using the INPUT button on the remote control. ANTENNA IN OPTICAL DIGITAL AUDIO OUT RS-C IN (CONTROL & SERVICE) VIDEO COMPONENT I AUDI Only 7/LF7*, LY99 Connect the digital set-top box to HDMI/DVI IN, HDMI IN or HDMI IN jack on the set. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) EJECT HDMI/DVI IN HDMI IN HDMI IN ANTENNA IN RS-C IN (CONTROL & SERVICE) RGB(PC) RGB IN OPTIC AUD (RGB Select HDMI, HDMI or HDMI input source with using the INPUT button on the remote control. VIDEO COMPONENT IN AUDI 8

21 When connecting with a HDMI to DVI cable Except 7/LF7*, LY99 Connect the digital set-top box to HDMI/DVI IN jack on the set. Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the set. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) Select HDMI input source with using the INPUT button on the remote control. ECT ENNA IN HDMI/DVI IN HDMI IN OPTICAL DIGITAL AUDIO OUT VIDEO RGB IN RGB(PC) AUDIO IN (RGB/DVI) COMPONENT IN AUDIO RS-C IN (CONTROL & SERVICE) A EXTERNAL EQUIPMENT SETUP Only 7/LF7*, LY99 Connect the digital set-top box to HDMI/DVI IN jack on the set. CT HDMI/DVI IN HDMI IN HDMI IN RS-C IN (CONTROL & SERVICE) RGB(PC) OPTICAL DIGITAL AUDIO OUT AUDIO IN (RGB/DVI) AV Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the set. Turn on the digital set-top box. (Refer to the owner s manual for the digital set-top box.) ANTENNA IN RGB IN VIDEO AUDIO COMPONENT IN Select HDMI input source with using the INPUT button on the remote control. 9

22 EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting with a component cable Connect the video outputs (Y, PB, ) of the DVD to the COMPONENT IN VIDEO jacks on the set. EXTERNAL EQUIPMENT SETUP 5 Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the set. Turn on the DVD player, insert a DVD. Select COMPONENT input source with using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. HDMI IN RGB IN RGB(PC) AUDIO IN (RGB/DVI) A DIGITAL AUDIO OUT VIDEO COMPONENT IN AUDIO Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Y PB Y PB Video output ports on DVD player Y Y B-Y Cb R-Y Cr Y Pb Pr 0

23 When connecting with a Euro Scart Connect the Euro scart socket of the DVD to the AV Euro scart socket on the set. RGB IN C) AUDIO IN (RGB/DVI) AV AV Turn on the DVD player, insert a DVD. PONENT IN! NOTE Select AV input source with using the INPUT button on the remote control. If connected to AV Euro scart socket, select AV input source. Refer to the DVD player's manual for operating instructions. G If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable. AUDIO AUDIO/ VIDEO (R) AUDIO (L) EXTERNAL EQUIPMENT SETUP When connecting with an S-Video cable VIDEO S-VIDEO L R ANT IN Connect the S-VIDEO output of the DVD to the S - VIDEO input on the set. OUTPUT SWITCH ANT OUT Connect the audio outputs of the DVD to the AUDIO input jacks on the set. Turn on the DVD player, insert a DVD. Select AV input source with using the INPUT button on the remote control. VIDEO L/MONO AUDIO R S-VIDEO 5 Refer to the DVD player's manual for operating instructions. AV IN

24 EXTERNAL EQUIPMENT SETUP When connecting HDMI cable HDMI/DVI IN HDMI IN RGB IN RGB(PC) AUD (RGB Except 7/LF7*, LY99 Connect the HDMI output of the DVD to the HDMI/DVI IN or HDMI IN jack on the set. ANTENNA IN OPTICAL DIGITAL AUDIO OUT RS-C IN (CONTROL & SERVICE) VIDEO COMPONENT IN AUDIO Select HDMIor HDMI input source with using the INPUT button on the remote control. EXTERNAL EQUIPMENT SETUP Refer to the DVD player's manual for operating instructions. Only 7/LF7*, LY99 Connect the HDMI output of the DVD to the HDMI/DVI IN, HDMI IN or HDMI IN jack on the set. Select HDMI, HDMI or HDMI input source with using the INPUT button on the remote control. EJECT HDMI/DVI IN HDMI IN HDMI IN ANTENNA IN RS-C IN (CONTROL & SERVICE) RGB(PC) RGB IN OPTICAL VIDEO AUDIO COMPONENT IN DIGITAL AUDIO OUT AUDIO IN (RGB/DVI) AV Refer to the DVD player's manual for operating instructions.! NOTE G TV can receive the video and audio signal simultaneously with using a HDMI cable. G If the DVD does not support Auto HDMI, you need to set the output resolution appropriately. INSERTION OF CI MODULE (This feature is not available in all countries.) PCMCIA CARD SLOT - To view the scrambled ( pay) services in digital TV mode. EJECT HDMI IN Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of TV as shown. For further information, see p.8. TV ANTENNA IN OPTICA RS- (CONTROL &

25 VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Typically a frozen still picture from a VCR. If the : picture format is used; the fixed images on the sides of the screen may remain visible on the screen. When connecting with an antenna ANTENNA IN OPTICAL DIGITAL AUDIO OU RS-C IN (CONTROL & SERVICE) VIDEO ANT OUT ANT IN S-VIDEO AUDIO OUTPUT SWITCH VIDEO Wall Jack Antenna L R EXTERNAL EQUIPMENT SETUP Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the set. Connect the antenna cable to the ANT IN socket of the VCR. Press the PLAY button on the VCR and match the appropriate programme between the TV and VCR for viewing.

26 EXTERNAL EQUIPMENT SETUP When connecting with a Euro Scart Connect the Euro scart socket of the VCR to the AV Euro scart socket on the set. RGB IN B(PC) AUDIO IN (RGB/DVI) MPONENT IN AV AV Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) AUDIO EXTERNAL EQUIPMENT SETUP! NOTE Select AV input source with using the INPUT button on the remote control. If connected to AV Euro scart socket, select AV input source. G If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable. AUDIO/ VIDEO (R) AUDIO (L) When connecting with a RCA cable Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) VIDEO L/MONO AUDIO R S-VIDEO Select AV input source using the INPUT button on the remote control. AV IN! NOTE S-VIDEO VIDEO OUTPUT SWITCH L R ANT IN ANT OUT G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the set.

27 When connecting with an S-Video cable Connect the S-VIDEO output of the VCR to the S - VIDEO input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. S-VIDEO VIDEO OUTPUT SWITCH L R ANT IN ANT OUT! NOTE Connect the audio outputs of the VCR to the AUDIO input jacks on the set. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) Select AV input source with using the INPUT button on the remote control. G If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received. AV IN VIDEO L/MONO AUDIO R S-VIDEO EXTERNAL EQUIPMENT SETUP DIGITAL AUDIO OUT SETUP Send the TV s audio to external audio equipment via the Digital Audio Output (Optical) port. Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. HDMI/DVI IN HDMI IN R RGB(PC Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. ANTENNA IN OPTICAL DIGITAL AUDIO OUT VIDEO COMP Set the TV Speaker option - Off in the AUDIO menu. ( G p.78). See the external audio equipment instruction manual for operation. RS-C IN (CONTROL & SERVICE) CAUTION GDo not look into the optical output port. Looking at the laser beam may damage your vision. 5

28 EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder Video Game Set EXTERNAL EQUIPMENT SETUP AV IN VIDEO L/MONO AUDIO R S-VIDEO VIDEO L R Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) Select AV input source with using the INPUT button on the remote control. Operate the corresponding external equipment. Refer to external equipment operating guide. 6

29 PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 5 pin cable HDMI IN RGB IN RGB(PC) AUDIO IN (RGB/DVI) AV AV Connect the RGB output of the PC to the RGB (P C) jack on the set. Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the set. Turn on the PC and the set. Select RGB input source with using the INPUT button on the remote control. DIGITAL AUDIO OUT C IN SERVICE) VIDEO COMPONENT IN RGB OUTPUT AUDIO AUDIO EXTERNAL EQUIPMENT SETUP When connecting with a HDMI to DVI cable EJECT HDMI/DVI IN HDMI IN RGB IN RGB(PC) AUDIO IN (RGB/DVI) AV Connect the DVI output of the PC to the HDMI/DVI IN jack on the set. Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the set. ANTENNA IN OPTICAL DIGITAL AUDIO OUT VIDEO COMPONENT IN AUDIO RS-C IN (CONTROL & SERVICE) Turn on the PC and the set Select HDMI input source with using the INPUT button on the remote control. DVI-PC OUTPUT AUDIO! NOTE G If the PC has a DVI output and no HDMI output, a separated audio connection is necessary. G If the PC does not support Auto DVI, you need to set the output resolution appropriately. 7

30 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP! NOTE G To enjoy vivid picture and sound, connect a PC to the set. G Avoid keeping a fixed image on the set s screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G Connect PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the set; change the resolution output of PC accordingly. G There might be noise according to some resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode into another resolution or change the refresh rate into another rate or adjust the brightness and contrast on the menu until the picture is clean. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult it to the manufacturer of the PC graphic card. G The synchronization input waveform for Horizontal and Vertical frequencies are separate. G We recommend using 90x080 (Reduced Blanking Timing), 60Hz for the PC mode, they provide the best picture quality. G In Plasma TV models, we recommend using 0x768, 60Hz for the PC mode, they provide the best picture quality. G Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the set or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the set. G Connect the audio cable from the PC to the Audio input on the set. (Audio cables are not included with the set). G If using a sound card, adjust PC sound as required. G This set uses a VESA Plug and Play Solution. The set provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this set. G DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionally. G If graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC on the set. G If graphic card on the PC does output analog and digital RGB simultaneously, set the set to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the set.) G DOS mode may not work depending on video card if you use a HDMI to DVI cable. G When you use too long RGB-PC cable, there might be a noise on the screen. We recommend using under 5m of the cable. It provides the best picture quality. 8

31 Resolution 70x00 60x80 800x600 8x6 0x768 80x768 60x768 66x768 80x0 00x x00 90x080 RGB[PC] / HDMI[PC] mode Horizontal Frequency(KHz) Supported Display Resolution Vertical Frequency(Hz) Resolution 60x80 70x80 70x576 80x70 90x080i 90x080p HDMI[DTV] mode Horizontal Frequency(KHz) Vertical Frequency(Hz) EXTERNAL EQUIPMENT SETUP : HDMI[PC] mode only! NOTE G Reduced Blanking Timing is applied with 600x00, 90x080 in RGB[PC] / HDMI[PC] mode. G 60PF9* isn t supported to 800x600, 75.00Hz in RGB[PC] mode. 9

32 EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Auto Configure (RGB [PC] mode only) I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Automatically adjusts picture position and minimizes image shaking.after adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. Q.VIEW EXTERNAL EQUIPMENT SETUP Auto configure This function is for the automatic adjustment of the screen position, clock, and phase. The displayed image will unstable for a few seconds while the auto configuration is in progress. Press the button and then use D or E button to select the SCREEN menu. Press the G button and then use D or E button to select Auto Config.. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Auto Config. Manual Config. XGA Mode Aspect Ratio Reset Press the G button to start Auto Config.. Move Prev. When Auto Config. has finished, will be shown on screen. If the position of the image is still not correct, try Auto adjustment again. If picture needs to be adjusted more after Auto adjustment in RGB (PC), you can adjust the Manual Config.. Auto Config. Manual Config. XGA Mode Aspect Ratio Reset G To Set Press the button to return to normal TV viewing. 0

33 SLEEP SUBTITLE TV/RADIO Adjustment for screen Phase, Clock, Position I/II RATIO TEXT PICTURE SOUND If the picture isn t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. It s not available to use this function in : Pixel mode. Q.VIEW To correct the screen size, adjust Clock. This function works in the following mode : RGB[PC]. Clock This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters. Move SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. Auto Config. Manual Config. XGA Mode Aspect Ratio Reset EXTERNAL EQUIPMENT SETUP Press the button and then use D or E button to select the SCREEN menu. Auto Config. Manual Config. XGA Mode Aspect Ratio Reset G Phase Clock H-Position V-Position Manual Config.. Phase, Clock, H-Position or V-Position. Press the F or G button to make appropriate adjustments. 5 Press the button to return to normal TV viewing.

34 EXTERNAL EQUIPMENT SETUP Selecting Wide XGA mode To see a normal picture, match the resolution of RGB mode and selection of XGA mode. I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND This function works in the following mode: RGB[PC] mode Q.VIEW EXTERNAL EQUIPMENT SETUP Press the button and then use D or E button to select the SCREEN menu. Press the G button and then use D or E button to select XGA Mode. Press the G button and then use D or E button to select the desired XGA resolution. Press the button to return to normal TV viewing. Move SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. Auto Config. Manual Config. XGA Mode Aspect Ratio Reset Auto Config. Manual Config. XGA Mode Aspect Ratio Reset G 0 X X X X 768

35 SLEEP SUBTITLE TV/RADIO Initializing (Reset to original factory settings) I/II RATIO TEXT PICTURE SOUND This function operates in current mode. To initialize the adjusted value It s not available to use ISM Method and Low power in LCD TV models. Q.VIEW Press the button and then D or E button to select the OPTION menu. Factory Mode. Factory Reset. Press the button. Move SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode EXTERNAL EQUIPMENT SETUP 5 The message If you enter a password, all user setting will be reset will appear. Use NUMBER buttons to input a -digit password. Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode G Set ID Factory Reset ISM Method Normal Low Power Off Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode Set ID Factory Reset ISM Method Normal Low Power Off

36 WATCHING TV /OGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS (Only 7//7/5LY9*, 50/60PF9*) When using the remote control, aim it at the remote control sensor on the TV. D/A POWER INPUT D/A Selects digital or analogue mode. Switches the set on from standby. WATCHING TV / OGRAMME CONTROL TV I/II DVD SLEEP RATIO TEXT PICTURE VCR SUBTITLE TV/RADIO SOUND Q.VIEW LIST 0 SIZE UPDATE INDEX HOLD i TIME REVEAL? POWER INPUT MODE SUBTITLE THUMBSTICK (Up/Down/Left Right) Coloured buttons UME UP /DOWN Q.VIEW Programme UP/DOWN 0~9 number button LIST Switches the set on from standby or off to standby. External input mode rotate in regular sequence. Selects the remote operating modes. Shows programme schedule. Shows the present screen information. Recalls your preferred subtitle in digital mode. Allows you to navigate the on-screen menus and adjust the system settings to your preference. Accepts your selection or displays the current mode. These buttons are used for teletext (only TELETEXT models) or Programme edit. Adjusts the volume. Switches the sound on or off. Returns to the previously viewed programme. Selects a programme. Selects a programme. Selects numbered items in a menu. Displays the programme table. Displays the selected favourite programme. VCR/DVD control buttons Controls some video cassette recorders or DVD players when you have already selected DVD or VCR mode button. Control connected AV devices by pressing the D or E or F or G, buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip. (The button does not provide such functions.)

37 D/A POWER INPUT See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen. TV DVD VCR SLEEP Sets the sleep timer. SLEEP SUBTITLE TV/RADIO Allow the user to move back one step in an interactive application, EPG or other user interaction function. I/II RATIO TEXT PICTURE SOUND Q.VIEW LIST 0 TV/RADIO I/II RATIO PICTURE SOUND TELETEXT BUTTONS Selects Radio or TV channel in digital mode. Selects the sound output. Selects your desired picture format. Adjusts the factory preset picture according to the room. To select the sound appropriate to your viewing programme. Selects a menu. These buttons are used for teletext. For further details, see the Teletext section. Clears all on-screen displays and returns to TV viewing from any menu. WATCHING TV / OGRAMME CONTROL SIZE TIME UPDATE REVEAL? INDEX i HOLD Installing Batteries Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). Install two.5v AA batteries. Don t mix old or used batteries with new ones. Close cover. 5

38 WATCHING TV /OGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS (Only 7//7/5LF6*, 7/LF7*) When using the remote control, aim it at the remote control sensor on the TV. INPUT D/A TV/RADIO INPUT POWER BRIGHT MODE TV DVD VCR POWER D/A INPUT TV/RADIO Switches the set on from standby or off to standby. Selects digital or analogue mode. Switches the set on from standby. Selects Radio or TV channel in digital mode. SIMPLINK TEXT RATIO I/II INPUT External input mode rotate in regular sequence. Switches the set on from standby. WATCHING TV / OGRAMME CONTROL Brightness adjustment Coloured buttons Adjusts screen brightness. It returns to the default settings brightness by changing mode source. These buttons are used for teletext (only TELETEXT models) or Programme edit. Clears all on-screen displays and returns to TV viewing from any menu. Allow the user to move back one step in an interactive application, EPG or other user interaction function. Selects a menu. Shows the present screen information. Shows programme schedule LIST 0 Q.VIEW UME UP /DOWN Adjusts the volume. Displays the selected favourite programme. UPDATE INDEX TIME SLEEP HOLD REVEAL SUBTITLE? Switches the sound on or off. Programme Selects a programme. UP/DOWN 0~9 number button Selects a programme. Selects numbered items in a menu. LIST Q.VIEW Displays the programme table. Returns to the previously viewed programme. 6

39 INPUT D/A TV/RADIO INPUT POWER BRIGHT MODE TV DVD VCR MODE Selects the remote operating modes. See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen. SIMPLINK TEXT RATIO I/II TELETEXT BUTTONS These buttons are used for teletext. For further details, see the Teletext section. RATIO Selects your desired picture format. 5 6 I/II VCR/DVD control buttons THUMBSTICK (Up/Down/Left Right) SLEEP SUBTITLE Selects the sound output. Controls some video cassette recorders or DVD players when you have already selected DVD or VCR mode button. Control connected AV devices by pressing the D or E or F or G, buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip. (The button does not provide such functions.) Allows you to navigate the on-screen menus and adjust the system settings to your preference. Accepts your selection or displays the current mode. Sets the sleep timer. Recalls your preferred subtitle in digital mode. WATCHING TV / OGRAMME CONTROL LIST 0 Q.VIEW Installing Batteries UPDATE INDEX TIME SLEEP HOLD REVEAL? SUBTITLE Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). Install two.5v AA batteries. Don t mix old or used batteries with new ones. Close cover. 7

40 WATCHING TV /OGRAMME CONTROL TURNING ON THE TV - If your TV will be turned on, you will be able to use its features. D/A POWER INPUT First, connect power cord correctly. At this moment, the TV switches to standby mode. TV DVD VCR WATCHING TV / OGRAMME CONTROL In standby mode to turn TV on, press the r / I, INPUT or D or E button on the TV or press the POWER, INPUT, D/A, D or E (or + or -) or NUMBER button on the remote control and then the TV will switch on. ( This feature is not available for all models.) Initializing setup If the OSD (On Screen Display) is displayed on the screen as figure after turning on the set, you can adjust the Language, Country, Time Zone, Auto programme tuning. Note: a. It will automatically disappear after approx. 0 seconds unless a button is pressed. b. Press the button to change current OSD into previous OSD. SIZE LIST INPUT D/A TV/RADIO INPUT 0 Q.VIEW POWER BRIGHT 9 MODE TV DVD VCR LIST 0 Q.VIEW 8

41 OGRAMME SELECTION Press the D or E (or + or -) or NUMBER buttons to select a programme number. I/II SLEEP RATIO PICTURE SUBTITLE TV/RADIO SOUND TEXT UME ADJUSTMENT Press the D or E (or + or -) button to adjust the volume. If you want to switch the sound off, press the button. You can cancel this function by pressing the, D or E (or + or -), or I/II button. Q.VIEW 5 6 VCR SIMPLINK TEXT RATIO I/II WATCHING TV / OGRAMME CONTROL 9

42 WATCHING TV /OGRAMME CONTROL ON SCREEN S SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Press the button and then D or E button to display each menu. a menu item. Change the setting of an item in the sub or pull-down menu with F or G button. You can move to the higher level menu by pressing the O K or button. WATCHING TV / OGRAMME CONTROL Move Move SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information Auto Config. Manual Config. XGA Mode Aspect Ratio Reset : This feature is not * available in all countries. Move Move SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. Picture Mode Colour Temperature Advanced Picture Reset Demo Sound Mode Auto Volume Balance 0 TV Speaker Digital Audio Out SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode Index : This feature is not * available for all models. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Clock Off Time On Time Auto Sleep Time Zone Move Prev. Move Prev.! NOTE G It s not available to use ISM Method and Low power in LCD TV models. G In Analogue mode, 5V Antenna Power, CI Information, Software Update and Diagnostics will not display. 0

43 AUTO OGRAMME TUNING (IN DIGITAL MODE) I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Use it to automatically find and store all of the programmes. When you start auto programming in digital mode, all the stored service information will be deleted. Q.VIEW Press the button and then D or E button to select the SETUP menu. Auto Tuning. Press the G button to begin auto tuning. Use NUMBER buttons to input a -digit password in Lock System On. The message All service-information will be updated. Continue? will appear. If you want to keep on auto tuning select YES with using the F or G button. Then, press the button. Otherwise select NO. Move Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. G Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information Start WATCHING TV / OGRAMME CONTROL To stop auto tuning, press the button. Auto Tuning Press the button to return to normal TV viewing. 0 Programme(s) 0 Programme(s) UHF CH. % Stop

44 WATCHING TV /OGRAMME CONTROL MANUAL OGRAMME TUNING (IN DIGITAL MODE) I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Manual Tuning lets you manually add a programme to your programme list. Q.VIEW WATCHING TV / OGRAMME CONTROL Press the button and then D or E button to select the SETUP menu. Manual Tuning. Press the G button and then D or E button or NUM- BER buttons to select the desired channel number. Use NUMBER buttons to input a -digit password in Lock System On. Press the button to save. When the channel number you want to add is already added in programme list, the massage Setup information for the channel will be updated. Continue? will appear. Move Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. G Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information Your receiver will add this channel to your channel list. UHF CH. 5 If you want to keep on manual tuning, select YES with using the F or G button. Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information Your receiver will add this channel to your channel list. D UHF CH 5 E Then, press the button. Otherwise select NO. Search 5 Press the button to return to normal TV viewing.

45 OGRAMME EDIT (IN DIGITAL MODE) I/II RATIO TEXT PICTURE SOUND When a programme number is skipped, it means that you will be unable to select it using D or E (or + or -) button during TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes. Q.VIEW LIST LIST 0 Q.VIEW It s available in some countries only to move a programme number by YELLOW button. Press the button and then D or E button to select the SETUP menu. Programme Edit menu. Press the G button to enter the Programme Edit menu. Use NUMBER buttons to input a -digit password in Lock System On. Select a programme to be stored or skipped with the D or E or F or G button. SIZE TIME UPDATE REVEAL INDEX i HOLD Move Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. G POSITION INDEX To Set TIME Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information? WATCHING TV / OGRAMME CONTROL 5 Press the BLUE button repeatedly to have the programme skipped or stored. In case of programmes to be skipped, skipped programme shows in blue colour and these programmes will not be selected by the D or E (or + or -) buttons during TV viewing. 6 Press the button to return to normal TV viewing.

46 WATCHING TV /OGRAMME CONTROL Mini Glossary Displayed when the DTV Programme. Displayed when the Locked Programme. Displayed when the Radio Programme. Displayed when the MHEG Programme. TEXT Displayed when the Teletext Programme. Displayed when the Subtitle Programme. Displayed when the Scramble Programme. Displayed when the Dolby Programme. A Skipping a programme number Select a programme number to be skipped with the D or E or F or G button. WATCHING TV / OGRAMME CONTROL Press the BLUE button. The skipped programme number turns to blue. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the D or E (or + or -) button during normal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG. Press the button to return to TV viewing. A Locking a programme (In Lock System On mode only) Select a programme to be locked with the D or E or F or G button. Press the GREEN button. The lock mark will appear in front of that programme number. Press the GREEN button again to release this function. Note : G To watch a locked programme, input a -digit password in Lock system. Be sure to remember this number! G If you forgot your password, press 7, 7, 7, 7 on the remote control handset. G If you select other programme after releasing a locked programme and then return to the locked programme within minute, you needn t input a password to select the locked programme. A Selecting favourite programme Select your favourite programme number by pressing D or E or F or G button and then press the button on your remote control handset. It will automatically include the selected programme into your favourite programme list.

47 5V ANTENNA POWER (IN DIGITAL MODE ONLY) I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Even if there isn t a special 5V adapter power in the external antenna, this function can output 5V in the set. Q.VIEW Press the button and then D or E button to select the SETUP menu. Press the G button and then use D or E button to select 5V Antenna Power. Press the G button and then use D or E button to select On or Off. In 5V Antenna Power On, if the set is short-circuit, it will automatically return to Off. The message Antenna feed overloaded. Automatically switched off. will appear. Move Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. G Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information Off On WATCHING TV / OGRAMME CONTROL Press the button to return to normal TV viewing. 5

48 WATCHING TV /OGRAMME CONTROL SOFTWARE UPDATE (IN DIGITAL MODE ONLY) I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Software Update, means software can be downloaded through the digital terrestrial broadcasting system. Press the button and then D or E button to select the SETUP menu. Q.VIEW WATCHING TV / OGRAMME CONTROL Software update. Off or On. If you select On, a user confirm message box will be displayed to notify that new software is found. Press the button to return to normal TV viewing. * When setting Software Update Occasionally, a transmission of updated digital software information will result in the following menu on the TV screen. Select the YES using the F or G button and when you see the following picture. After Software Update is completed, the System takes about one minute to restart. Move PICTUREO Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information SETUPO AUDIOO TIMEO OPTIONO SCREENO Prev. G Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information Off On - During Progress of Software Update, please note the following: The power of the set must not be interrupted. The set must not be switched off. The antenna must not be disconnected. During this time, you should not switch off the power to the set. At this time, you should not work power On/Off. After Software Update, you can confirm the updated software version in Diagnostics menu. 6

49 DIAGNOSTICS (IN DIGITAL MODE ONLY) I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND This function enables you to watch Manufacturer, Model/Type, Serial Number and Software Version. It s displayed the information and signal strength of the turned MUX. It s displayed the signal information and service name of the selected MUX. Q.VIEW Press the button and then D or E button to select the SETUP menu. Press the G button and then use D or E button to select Diagnostics. Press the G button to display Manufacturer, Model/Type, Serial Number and Software Version. Press the button to return to normal TV viewing. Move PICTUREO Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information SETUPO AUDIOO TIMEO OPTIONO SCREENO Prev. G Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information To Set WATCHING TV / OGRAMME CONTROL Engineering i Diagnostics Channel 0 Manufacturer : LG Electronics Inc. Model / Type Transmitter : 7LCD-EC : Teracom_Mux_ Serial No. Signal : 60KG Strength 5% Software Version :..0 Signal Quality 00% CH 0 CH D YLE PEU YLE TV YLE TV YLEQ 5 YLE FST 6 YLEN KLASS 7 YLE FSR+ 8 YLE Menu Prev. Select Back E 7

50 WATCHING TV /OGRAMME CONTROL CI [COMMON INTERFACE] INFORMATION (IN DIGITAL MODE ONLY) This function enables you to watch some scrambled services (pay services). If you remove the CI Module, you can t watch the pay services. When the module is inserted to CI slot, you can access the module menu. To purchase a module and smart card, contact your supplying dealer. Do not often insert or remove a CAM module from the set. It may cause a trouble. When the set turned on after inserting the CI Module, you often can t hear the sound. I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Q.VIEW WATCHING TV / OGRAMME CONTROL There might be unnatural picture according to CI module and smart card. CI (Common Interface) function may not be applied based on country broadcasting circumstance. 5 Press the button and then D or E button to select the SETUP menu. CI Information. Press the G button and then button. Press the D or E button to select the desired item: Module information, smart card information, language, or software download etc. Press the button. Move SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Software Update Diagnostics CI Information G Module 6 Press the button to return to normal TV viewing. This OSD is only for illustration and the menu options and screen format will vary according to the Digital pay services provider. It s possible for you to change CI (Common Interface) menu screen and service by your dealer. Viaccess Module Consultations Authorizations Module information Select the item 5 8

51 I/II RATIO PICTURE SOUND AUTO OGRAMME TUNING (IN ANALOGUE MODE) TEXT All stations that can be received are stored by this method. It is recommended that you use Auto tuning during installation of this set. Q.VIEW LIST 0 LIST 0 Q.VIEW Press the button and then D or E button to select the SETUP menu. Auto Tuning. Press the G button to select System. Select a TV system with the F or G button; L : SECAM L/L (France) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) Press the E button to select Storage From. Select the beginning programme number with the F or G button or NUMBER buttons on the Storage From menu. SIZE TIME UPDATE REVEAL? INDEX i HOLD Move Auto Tuning Manual Tuning Programme Edit G POSITION INDEX SLEEP HOLD REVEAL SETUPO Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit TIMEO OPTIONO SCREENO Prev. System Storage From Start TIME? BG WATCHING TV / OGRAMME CONTROL 5 Press the E button to select Start. The station name is stored for stations which broadcast VPS (Video Programme Service), PDC (Programme Delivery Control) or TELETEXT data. If no station name can be assigned to a station, the channel number is assigned and stored as C (V/UHF 0-69) or S (Cable 0-7), followed by a number. 5 To stop auto tuning, press the button. When auto tuning is completed, the Programme Edit menu appears on the screen. See the Programme Edit section to edit the stored programme. 9

52 WATCHING TV /OGRAMME CONTROL MANUAL OGRAMME TUNING (IN ANALOGUE MODE) I/II RATIO TEXT PICTURE SOUND Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. Q.VIEW WATCHING TV / OGRAMME CONTROL 5 6 Press the button and then D or E button to select the SETUP menu. Manual Tuning. Press the G button to select Storage. Select the desired programme number with the F or G button or NUMBER buttons on the Storage menu. Press the E button to select System. Select a TV system with the F or G button; L : SECAM L/L (France) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) Press the E button to select Band. Press the F or G button to select V/UHF or Cable as required. Press the E button to select Channel. You can select the desired channel number with the F or G button or NUMBER buttons. If possible, select the channel number directly with the NUMBER buttons. SIZE TIME LIST UPDATE REVEAL 0 INDEX i HOLD Move Auto Tuning Manual Tuning Programme Edit G LIST POSITION Storage System Band Channel Fine Search Name 6 0 INDEX SETUPO Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit TIMEO OPTIONO SCREENO Prev. 7 8 Q.VIEW TIME? BG V/UHF C Press the E button to select Search. Press the F or G button to commence searching. If a station is found the search will stop. 8 Press the button to store it. 9 To store another station, repeat steps to 8. 0 Press the button to return to normal TV viewing. 50

53 FINE TUNING (IN ANALOGUE MODE) Normally fine tuning is only necessary if reception is poor. I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Press the button and then D or E button to select the SETUP menu. Q.VIEW Manual Tuning. 5 6 Fine. Press the G button and then F or G button to fine tune for the best picture and sound. Press the button to store it. Press the button to return to normal TV viewing. ASSIGNING A STATION NAME (IN ANALOGUE MODE) You can assign a station name with five characters to each programme number. Move Auto Tuning Manual Tuning Programme Edit SETUPO Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit TIMEO OPTIONO SCREENO Prev. Storage System Band Channel Fine Search Name BG V/UHF FG C 0 WATCHING TV / OGRAMME CONTROL Press the button and then D or E button to select the SETUP menu. Store 5 Manual Tuning. Name. Press the G button and then D or E button. You can use a the alphabet A to Z, the number 0 to 9, +/ -, and blank. Auto Tuning Manual Tuning Programme Edit Storage System Band Channel Fine Search Name F D E BG V/UHF C 0 G 5 6 Press the F or G button to select the position and make your choice of the second character, and so on. Press the button to store it Press the button to return to normal TV viewing. 5

54 WATCHING TV /OGRAMME CONTROL OGRAMME EDIT (IN ANALOGUE MODE) I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. Q.VIEW WATCHING TV / OGRAMME CONTROL Press the button and then D or E button to select the SETUP menu. Programme Edit. Press the G button to display the Programme Edit menu. A Deleting a programme a b Select a programme to be deleted with the D or E or F or G button. Press the RED button twice. The selected programme is deleted, all the following programmes are shifted up one position. Move SETUPO Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit TIMEO OPTIONO SCREENO Prev. Auto Tuning Manual Tuning Programme Edit G To Set A Copying a programme a Select a programme to be copied with the D or E or F or G button. b Press the GREEN button. All the following programmes are shifted down one position. 5

55 I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Q.VIEW LIST 0 LIST 0 Q.VIEW Q.VIEW SIZE TIME UPDATE REVEAL? INDEX i HOLD POSITION INDEX TIME SLEEP HOLD REVEAL? A Moving a programme a b c d Select a programme to be moved with D or E or F or G button. Press the YELLOW button. Move the programme to the desired programme number with the D or E or F or G button. Press the YELLOW button again to release this function. A Skipping a programme number a b c d Select a programme number to be skipped with D or E or F or G button. Press the BLUE button. The skipped programme number turns to blue. Press the BLUE button to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the D or E (or + or -) button during normal TV viewing. WATCHING TV / OGRAMME CONTROL If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. A Selecting Favourite Programme a b Select your favourite programme number with D or E or F or G button. Press the button. The selected programme will be added to the favourite programme list. 5

56 WATCHING TV /OGRAMME CONTROL CALLING THE OGRAMME TABLE TEXT You can check the programmes stored in the memory by displaying the programme table. Q.VIEW LIST LIST 0 Q.VIEW A Displaying programme LIST SIZE UPDATE INDEX i HOLD POSITION INDEX TIME WATCHING TV / OGRAMME CONTROL Press the LIST button to display the OGRAMME LIST menu. The programme list appears on the screen. You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode. Some programmes with the channel number shown in the programme LIST indicate there is no station name assigned. A Selecting a programme in the programme list Select a programme with the D or E button. Press the button. The set switches to the chosen programme number. A Paging through a programme list There are programme LIST pages which total contain 00 programmes (Analogue Mode). DTV List D YLE TV YLE TV YLE FST YLE 5 YLE Teema 6 TV 7 TV Film 8 TV 00 9 TV Plus 0 CNN E < In Digital Mode > Programme List 0 BBC C 0 C 0 C C 05 5 BLN 6 S 0 7 S 05 8 S 07 9 S Press the D or E button repeatedly to turns the pages. Press the LIST button to return to normal TV viewing. < In Analogue Mode > A Displaying favourite programme table Press the button to display the Favourite Programme table menu. Mini Glossary Displayed when the Favourite Programme. Displayed when the Locked Programme. 5

57 INPUT SOURCE SELECTION Sets a label to each input source which is not in use. I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Press the button and then use D or E button to select the OPTION menu. Press the G button and then use D or E button to select Input Label. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode 5 Press the G button and then use D or E button to select the source: AV, AV, Comp., RGB, HDMI, HDMI or HDMI(Only 7/LF7*, LY99). Press the F or G button to select the label. Press button to return to normal TV viewing. INDEX You can switch FRONT DISPLAY on or off. This feature is not available for all models. Press the button and then use D or E button to select the OPTION menu. Move Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode Prev. G AV AV AV Comp. RGB HDMI HDMI HDMI Only 7/LF7*, LY99 SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode Index WATCHING TV / OGRAMME CONTROL Press the G button and then use D or E button to select Index. Move Prev. Press the G button and then use D or E button to select On or Off. When you select On mode, The FRONT DISPLAY illuminates brightly. Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode Index G Off On Press the button to return to normal TV viewing. 55

58 WATCHING TV /OGRAMME CONTROL SLEEP SUBTITLE TV/RADIO I/II RATIO TEXT PICTURE SOUND This operates only for the devices with the SIMPLINK logo. Please check the SIMPLINK logo. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. Q.VIEW If you do not want SIMPLINK menu, select Off. WATCHING TV / OGRAMME CONTROL In 7/LF7*, LY99 model, SIMPLINK function is not supported by HDMI IN input. Press the button and then D or E button to select the OPTION menu. SIMPLINK. Off or On. Press the button to return to normal TV viewing. Move Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. G Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode Off On 56

59 SIMPLINK Functions Disc playback Control connected AV devices by pressing the D or E or F or G,,,,,,, and buttons. Direct Play After connecting AV devices to TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of AV devices connected to TV and play it. Power off all devices When you power off TV, all connected devices are turned off. Switch audio-out Offers an easy way to switch audio-out. * A device, which is connected to TV through HDMI cable but does not support Simplink, does not provide this function. SIMPLINK Menu Press the D or E or F or G button and then button to select the desired SIMPLINK source. 5 TV viewing : Switch to the previous TV programme regardless of the current mode. DISC playback : Select and play connected discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. VCR playback : Play and control the connected VCR. HDD Recordings playback : Play and control recordings stored in HDD. Audio Out to Home theatre/audio Out to TV: Select Home theatre or TV speaker for Audio Out. 5 Selected Device When no device is connected (displayed in gray) When a device is connected (displayed in bright colour) WATCHING TV / OGRAMME CONTROL! NOTE G Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. G After connecting the HDMI terminal for the home theater with SIMPLINK function in the above method, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with the OPTICAL cable. G When operating the external device with SIMPLINK, press the TV button among the MODE button on the remote controller. G When you switch the Input source with the INPUT button on the remote controller, you can stop the operation of device controlled by SIMPLINK. G When you select or operate the media device with home theater function, the speaker automatically switches to home theater speaker (HT speaker). 57

60 PICTURE CONTROL EPG (ELECTRONIC OGRAMME ) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster). This function can be used only when the EPG information is broadcasted by broadcasting companies. The EPG displays the programme description for next 8 days. PICTURE CONTROL Switch on/off EPG Press the button to switch on EPG. Press the or button again to switch off EPG and return to normal TV viewing. Select a programme Press the D or E, F or G, D or E (or + or -) button to select desired programme, then press the button to display the selected programme. 58

61 Button Function in NOW/NEXT Guide Mode Remote Control Buttons RED YELLOW BLUE F or G D or E / TV/RADIO Function Change EPG mode Enter Timer Record/Remind setting mode Enter Timer Record/Remind list mode Change to the selected channel Select NOW or NEXT Programme Select the Broadcasting Programme Page Up/Down Switch off EPG Select TV or RADIO Programme The detail information on or off Button Function in 8 Days Guide Mode Remote Control Buttons RED GREEN YELLOW BLUE F or G D or E / TV/RADIO Function Change EPG mode Enter Date setting mode Enter Timer Record/Remind setting mode Enter Timer Record/Remind list mode Change to the selected channel Select NOW or NEXT Programme Select the Broadcasting Programme Page Up/Down Switch off EPG Select TV or RADIO Programme The detail information on or off PICTURE CONTROL Button Function in Date Change Mode Remote Control Buttons GREEN F or G E / Function Switch off Date setting mode Change to the selected date Select a date Switch off Date setting mode Switch off EPG 59

62 PICTURE CONTROL Button Function in Extended Description Box Remote Control Buttons D or E YELLOW / Function Text Up/Down Enter Timer Record/Remind setting mode The detail information on or off Switch off EPG PICTURE CONTROL Button Function in Record/Remind Setting Mode - This function is available only when recording equipment that use pin8 recording signalling has been connected to the DTV-OUT terminal, using a SCART cable. Remote Control Buttons YELLOW F or G D or E Function Change to Guide or Timer list mode Save Timer Record/Remind Select Type, Service, Date or Start/End time Function setting Button Function in Timer List Mode Remote Control Buttons YELLOW GREEN RED BLUE D or E Function Add new Manual Timer setting mode Enter Timer list editing mode Delete the selected item Change to Guide mode Select Timer list 60

63 PICTURE SIZE (ASPECT RATIO) CONTROL I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND You can watch the screen in various picture formats; Spectacle(Except 7/LF7*, LY99), Full(Except LY99), Original, :, 6:9, :9, Zoom/ and : Pixel (or Just Scan(Only 7/LF7*, LY99)). Q.VIEW If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. There might be uncomfortable in full mode. Then change into other mode. You can adjust the enlarge proportion using D or E button. This function works in the following signal. Press the RATIO button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the SCREEN menu. PICTURE CONTROL Spectacle (Except 7/LF7*, LY99) When your TV receives the wide screen signal, when selected it will adjust the picture horizontally, in non-linear proportion, to fill the entire screen. Original When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent. Spectacle DE Original Full (Except LY99) When your TV receives the wide screen signal, when selected it will adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully. : Following selection will lead you to view a picture with an original : aspect ratio, with gray bars appearing at both the left and right sides. Full DE : 6

64 PICTURE CONTROL 6:9 Following selection will lead you to adjust the picture horizontally, in a linear proportion, to fill the entire screen (useful for viewing : formatted DVDs). Zoom Choose Zoom when you want the picture to be altered, both horizontally extended and vertically cropped. The picture taking a halfway trade off between alteration and screen coverage. 6:9 PICTURE CONTROL :9 You can enjoy the picture format of :9 or general TV programme through the :9 mode. The screen :9 is viewed just like that the screen : is magnified to the left / right. :9 DE Zoom : Pixel (or Just Scan(Only 7/LF7*, LY99)) Following Selection will lead to you view the picture of best quality without loss of original picture in high resolution image. DE Zoom Following selection will lead you to view the picture without any alternation, while filling the entire screen. However, the top and bottom portions of the picture will be cropped. Zoom DE! NOTE G You can only select :, 6:9 (Wide), Zoom / in Component, HDMI mode. G You can only select :, 6:9 (Wide) in RGB mode only. G In HDMI (080i 50Hz/60Hz, 080p Hz/50Hz/60Hz) mode, : Pixel(or J u s t S c a n(only 7/LF7*, LY99)) is available. 6

65 ESET PICTURE SETTINGS I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Picture Mode-Preset Dynamic Standard Mild User / Select this option to display with a sharp image. The most general and natural screen display status. Select this option to display with a mild image. Select this option to use the user-defined setting. Q.VIEW Press the button and then D or E button to select the PICTURE menu. Picture Mode. Intelligent Eye (except 50/60PF9*), Dynamic, Standard, Mild, User, or User. Move SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. Picture Mode Colour Temperature Advanced Picture Reset Demo PICTURE CONTROL Press the button to return to normal TV viewing. Picture Mode adjusts the set for the best picture appearance. Select the preset value in the Picture Mode menu based on the programme category. Picture Mode Colour Temperature Advanced Picture Reset Demo G Intelligent Eye Dynamic Standard Mild User User Intelligent Eye (except 50/60PF9*), Dynamic, Standard and Mild are programmed for optimum picture reproduction at the factory and cannot be changed. 6

66 PICTURE CONTROL Auto Colour Tone Control (Warm/Medium/Cool) I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND To initialize values (reset to default settings), select the Cool option. Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. Q.VIEW It s available to use this function in User mode. PICTURE CONTROL Press the button and then D or E button to select the PICTURE menu. Colour Temperature. either Cool, Medium, Warm, or User. Move SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. Picture Mode Colour Temperature Advanced Picture Reset Demo Press the button to return to normal TV viewing. Picture Mode Colour Temperature Advanced Picture Reset Demo G Cool Medium Warm User 6

67 MANUAL PICTURE ADJUSTMENT Picture Mode-User option I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Contrast Brightness Colour Sharpness T i n t Adjusts the difference between the light and dark levels in the picture. Increases or decreases amount of white in the your picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts the balance between red and green levels. Q.VIEW SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Picture Mode Colour Temperature Advanced Picture Reset Demo Press the button and then D or E button to select the PICTURE menu. Picture Mode. User or User. Move Picture Mode Colour Temperature Advanced Picture Reset Demo Prev. G Intelligent Eye Dynamic Standard Mild User User PICTURE CONTROL the desired picture option (Contrast, Brightness, Colour, Sharpness and Tint). 5 Press the F or G button to make appropriate adjustments. User 6 Press the button to return to normal TV viewing. Contrast 00 G Brightness 5 Colour 50 Sharpness 50 Tint 0 R G! NOTE G You can t adjust colour, sharpness and tint in the RGB- PC mode to the levels you prefer. 5 65

68 PICTURE CONTROL SLEEP SUBTITLE TV/RADIO Colour Tone - User option I/II RATIO TEXT PICTURE SOUND To adjust red, green, blue to any colour temperature you prefer. Q.VIEW PICTURE CONTROL Press the button and then D or E button to select the PICTURE menu. Colour Temperature. User. Move SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. Picture Mode Colour Temperature Advanced Picture Reset Demo Red, Green or Blue. Picture Mode Colour Temperature Advanced Picture Reset Demo G Cool Medium Warm User 5 Press the F or G button to make appropriate adjustments. 6 Press the button to return to normal TV viewing. User Red 0 G Green 0 Blue

69 XD - PICTURE IMOVEMENT TECHNOLOGY I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. It s not available to use this function in PC[RGB/HDMI] mode. Q.VIEW Press the button and then D or E button to select the PICTURE menu. XD. Auto or Manual. Press the button to return to normal TV viewing. * Selecting the Manual This menu is activated after selecting the User or User of Picture Mode. XD Contrast, XD Colour, XD NR or MPEG NR. On or Off. Move SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. Picture Mode Colour Temperature Advanced Picture Reset Demo G Picture Mode Colour Temperature Advanced Picture Reset Demo Auto Manual XD Contrast XD Colour XD NR On On Low MPEG NR 0 PICTURE CONTROL Press the button to return to normal TV viewing. A XD Contrast : Optimizing the contrast automatically according to the brightness of the reflection. A XD Colour : Adjusting the colors of the reflection automatically to reproduce as closely as possible to the natural colors. A XD NR : Removing the noise up to the point where it does not damage the original picture. A MPEG NR : To reduce the picture noise which may appear on the screen during watching the TV. Picture Mode Colour Temperature Advanced Picture Reset Demo Auto Manual XD Contrast On XD Colour On XD NR Low MPEG NR 0 G 67

70 PICTURE CONTROL DEMO Use it to see the difference between XD Demo on and XD Demo off. It s not available to use this function in RGB[PC], HDMI[PC] mode. I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Press the button and then D or E button to select the PICTURE menu. Press the button and then D or E button to select XD Demo. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Picture Mode Colour Temperature Advanced Picture Reset Demo Press the G button to begin XD Demo. To stop XD Demo, press the or button. Move Prev. PICTURE CONTROL TRUMOTION DEMO ( Only LY99) Use it to see the difference between TruMotion Demo on and TruMotion Demo off. It s not available to use this function in RGB[PC], HDMI[PC] mode. Picture Mode Colour Temperature Advanced Picture Reset Demo G To Start * Only LY99 Press the button and then D or E button to select the PICTURE menu. Picture Mode Colour Temperature Press the button and then D or E button to select TruMotion Demo. Advanced Picture Reset Demo TruMotion Demo G To Start Press the G button to begin TruMotion Demo. To stop TruMotion Demo, press the M E N U or button. XD Demo TruMotion Demo XD Off XD On Exit TruMotion On TruMotion Off 68

71 ADVANCED - CINEMA I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Set up the TV for the best picture appearance for viewing movies. This feature operates only in TV, AV, S-Video and Component 80i/576i, DTV mode. Press the button and then D or E button to select the PICTURE menu. Advanced. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Picture Mode Colour Temperature Advanced Picture Reset Demo Cinema. Move Prev. 5 Press the F or G button to select On or Off. Press the button to return to normal TV viewing. ADVANCED - TRUMOTION ( Only LY99) It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. This feature is disable in RGB-PC,HDMI-PC mode. Picture Mode Colour Temperature Advanced Picture Reset Demo G Cinema Black Level Off Low PICTURE CONTROL Press the button and then D or E button to select the PICTURE menu. Advanced. Picture Mode Colour Temperature Advanced Picture Reset Demo Cinema F G On Black Level Low TruMotion. Press the F or G button to select Off, Low or High. * Only LY99 A Low Set amount of film judder to low. A High Set amount of film judder to high. * If you have some problem in viewing picture, set TruMotion to Lowor Off. Picture Mode Colour Temperature Advanced Picture Reset Demo TruMotion Demo Cinema On Black Level Low TruMotion F GHigh 5 Press the button to return to normal TV viewing. 69

72 PICTURE CONTROL ADVANCED - BLACK(DARKNESS) LEVEL I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the screen. This function works in the following mode: AV (NTSC-M), S-Video (NTSC-M) or HDMI. Q.VIEW Press the button and then D or E button to select the PICTURE menu. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Picture Mode Colour Temperature Advanced Picture Reset Demo PICTURE CONTROL Advanced. Black Level. Move Prev. Picture Mode Colour Temperature Press the F or G button to select Low or High. A Low : The reflection of the screen gets darker. A High : The reflection of the screen gets brighter. Advanced Picture Reset Demo G Cinema Off Black Level Low 5 Press the button to return to normal TV viewing. Picture Mode Colour Temperature Advanced Picture Reset Demo Cinema Off Black Level F G Low 70

73 PICTURE RESET I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Returns to the default settings Picture Mode, Colour Temperature, XD, Advanced at the factory. Q.VIEW Press the button and then D or E button to select the PICTURE menu. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Picture Mode Colour Temperature Advanced Picture Reset Demo Picture Reset. Press the G button to initialize the adjusted value. Move Prev. Picture Mode Colour Temperature PICTURE CONTROL Advanced Picture Reset Demo G To Set 7

74 PICTURE CONTROL IMAGE STICKING MINIMIZATION (ISM) METHOD I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time. Q.VIEW It s not available to use this function in LCD models. PICTURE CONTROL White wash White wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash. Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every minutes. Inversion This is the function to invert the panel colour of the screen. The panel colour is automatically inverted every 0 minutes. Move Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. G Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode Set ID Factory Reset ISM Method Low Power Normal Off Press the button and then D or E button to select the OPTION menu. Factory Mode. ISM Method. Press the F or G button to select either Normal, White wash, Orbiter or Inversion. If you unnecessary to set this function, set Normal. Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode Set ID Factory Reset ISM Method F G Normal Low Power Off 5 Press the button to return to normal TV viewing. 7

75 LOW-POWER PICTURE MODE This is the function to reduce the power consumption of the set. I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND It s not available to use this function in LCD TV models. Q.VIEW Press the button and then D or E button to select the OPTION menu. Factory Mode. Low power. Press the F or G button to select On or Off. 5 Press the button to return to normal TV viewing. Language Move Country Lock System Parental Control Input Label SIMPLINK Factory Mode SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. G Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode Set ID Factory Reset ISM Method Low Power Normal Off PICTURE CONTROL Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode Set ID Factory Reset ISM Method Normal Low Power F G On 7

76 SOUND & LANGUAGE CONTROL AUTO UME LEVELER I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND AVL automatically keeps on an equal volume level even if you change programmes. Q.VIEW Press the button and then D or E button to select the AUDIO menu. Auto Volume. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Sound Mode Auto Volume Balance 0 TV Speaker Digital Audio Out SOUND & LANGUAGE CONTROL Off or On. Press the button to return to normal TV viewing. Move Prev. Sound Mode Auto Volume G Balance 0 TV Speaker Digital Audio Out Off On 7

77 ESET SOUND SETTINGS- SOUND MODE I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND You can select your preferred sound setting; Surround MAX, Standard, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. Sound Mode lets you enjoy the best sound without any Special adjustment because the TV sets the appropriate sound options based on the programme content. Q.VIEW Surround MAX, Standard, Music, Movie, and Sports are preset for good sound quality at the factory and are not adjustable. Surround MAX Select this option to sound realistic. Standard The most commanding and natural audio. Music Select this option to enjoy the original sound when listening to the music. Movie Select this option to enjoy sublime sound. Sports Select this option to watch sports broadcasting. User Select this option to use the user-defined audio settings. Press the button and then D or E button to select the AUDIO menu. Sound Mode. Move SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. Sound Mode G Auto Volume Balance 0 TV Speaker Digital Audio Out Sound Mode Auto Volume Balance 0 TV Speaker Digital Audio Out Surround MAX Standard Music Movie Sports User SOUND & LANGUAGE CONTROL Surround MAX, Standard, Music, Movie, Sports or User. Press the button to return to normal TV viewing. 75

78 SOUND &LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Adjust the sound equalizer. Q.VIEW Press the button and then D or E button to select the AUDIO menu. Sound Mode. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Sound Mode Auto Volume Balance 0 TV Speaker Digital Audio Out SOUND & LANGUAGE CONTROL 5 6 User. Press the G button. Select a sound band by pressing the F or G button. Make appropriate sound level with the D or E button. Press the button to return to normal TV viewing. Move Prev. Sound Mode G Auto Volume Balance 0 TV Speaker Digital Audio Out Surround MAX Standard Music Movie Sports User User 0Hz F G 00Hz 500Hz.KHz KHz 7.5KHz KHz 5 76

79 BALANCE I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND You can adjust the sound balance of speaker to the levels you prefer. Q.VIEW Press the button and then D or E button to select the AUDIO menu. Balance. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Sound Mode Auto Volume Balance 0 TV Speaker Digital Audio Out Press the G button and then F or G button to make desired adjustment. Press the button to return to normal TV viewing. Move Sound Mode Auto Volume Balance TV Speaker Digital Audio Out Prev. 0 G L R SOUND & LANGUAGE CONTROL 77

80 SOUND &LANGUAGE CONTROL TV SPEAKERS ON/ OFF SETUP I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND You can adjust the internal speaker status. In AV, AV, AV, COMPONENT, RGB and HDMI with HDMI to DVI cable, TV speaker can be outputted even though there is no video signal. Q.VIEW If you want to use your external hi-fi stereo system, turn off the internal speakers of the set. Press the button and then D or E button to select the AUDIO menu. TV Speaker. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Sound Mode Auto Volume Balance 0 TV Speaker Digital Audio Out SOUND & LANGUAGE CONTROL Off or On. Press the button to return to normal TV viewing. Move Prev. Sound Mode Auto Volume Balance 0 TV Speaker G Digital Audio Out Off On 78

81 SELECTING DIGITAL AUDIO OUT I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND This function lets you select your preferred Digital Audio Output. The set can output Dolby Digital in a channel only which broadcast Dolby Digital Audio. When it s applied the Dolby Digital format, if you select Dolby Digital on Digital audio out menu, SPDIF Output will be outputted Dolby Digital. Even if it s selected Dolby Digital, when it doesn t apply Dolby Digital format, SPDIF Output will be outputted PCM. Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby Digital Audio, only Dolby Digital will be played. This function is not displayed in the Analog mode. Q.VIEW Manufactured under license from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby Laboratories. Press the button and then D or E button to select the AUDIO menu. Digital Audio Out. Dolby Digital or PCM. Press the button to return to normal TV viewing. Move SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Prev. Sound Mode Auto Volume Balance 0 TV Speaker Digital Audio Out Sound Mode Auto Volume Balance 0 TV Speaker Digital Audio Out G Dolby Digital PCM SOUND & LANGUAGE CONTROL 79

82 SOUND &LANGUAGE CONTROL I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast Mono Stereo Dual On Screen Display MONO STEREO DUAL I SOUND & LANGUAGE CONTROL A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I/II button twice. In mono reception, the depth of sound is improved. To switch back to stereo, press the I/II button twice again. A Language selection for dual language broadcast If a programme received two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly. DUAL I DUAL II DUAL I+II Sends the primary broadcast language to the loudspeakers. Sends the secondary broadcast language to the loudspeakers. Sends a separate language to each loudspeaker. 80

83 NICAM Reception (In Analogue Mode Only) If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly. When NICAM mono is received, you can select NICAM MONO or FM MONO. When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono. When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO. Speaker Sound Output Selection In AV, S-Video, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers. SOUND & LANGUAGE CONTROL Repeatedly press the I/II button to select the sound output. L+R: Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R input is sent to the right loud speaker. L+L: Audio signal from audio L input is sent to left and right loud speakers. R+R: Audio signal from audio R input is sent to left and right loud speakers. 8

84 SOUND &LANGUAGE CONTROL SUBTITLE ON-SCREEN LANGUAGE / COUNTRY SELECTION I/II SLEEP RATIO TEXT PICTURE TV/RADIO SOUND Installation guide menu appears on TV screen when it is turned on for the first time. Press the D or E or F or G button and then, O K button to select your desired language. Press the D or E button and then, button to select your country. * If you want to change Language/ Country selection SOUND & LANGUAGE CONTROL Press the button and then use D or E button to select the OPTION menu. Press the G button and then use D or E button to select Language. The menus can be shown on the screen in the selected language. Or, Press the G button and then use D or E button to select Country. Press the G button and then use F or G button to select your desired language or country. 5 Press the button. Press the button to return to normal TV viewing.! NOTE G If you don t finish set up Installation Guide by pressing button or time out of OSD (On Screen Display) display, it will continuously appear until completing set up whenever the set is turned on. G If you select wrong local country, the teletext may not appear correctly on the screen and some problem may happen during teletext operation. G CI (Common Interface) function may not be applied based on country broadcasting circumstance. G DTV mode control buttons may not be working based on country broadcasting circumstance. 8

85 LANGUAGE SELECTION (IN DIGITAL MODE ONLY) Audio function lets you select your preferred language for audio. If the audio data in selected language is not broadcasted, default language audio will be played. TV I/II DVD SLEEP RATIO TEXT PICTURE VCR SUBTITLE TV/RADIO SOUND Use Subtitle function when two or more subtitle languages are broadcasted. If the subtitle data in selected language is not broadcasted, default language subtitle will be displayed. SIMPLINK TEXT RATIO I/II Press the button and then use D or E button to select the OPTION menu. Press the G button and then use D or E button to select Language. 5! Press the G button and then use D or E button to select Audio, Subtitle or Subtitle Hard of hearing. Press the G button and then use F or G button to select your desired language. Press the button to return to normal TV viewing. NOTE < Audio Language Selection > G When two or more audio languages are broadcasted, you can select audio language with the I/II button on the remote control. G Press the D or E button to select an audio language. G Press the F or G button to select L+R, L+L or R+R. Display N.A SLEEP HOLD REVEAL SUBTITLE Audio Language OSD Information Status Not Available MPEG Audio Dolby Digital Audio Audio for Visual Impaired Audio for Hearing Impaired? SOUND & LANGUAGE CONTROL < Subtitle Language Selection > G When two or more subtitle languages are broadcasted, you can select subtitle language with the SUBTITLE button on the remote control. G Press the D or E button to select a subtitle language. Subtitle Language OSD Information Display N.A TEXT Status Not Available Teletext Subtitle Subtitle for Hard of Hearing - The audio/subtitle can be displayed simpler form with to characters which is broadcast by service provider. - When you select supplementary Audio (Audio for Visual/Hearing Impaired ) it may speak out a part of Main audio. 8

86 TIME SETTING CLOCK SETUP I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND The clock is set automatically when receiving the digital signal. (You can set the clock if the TV has no DTV signal.) You must set to the time correctly before using on/off time function. Q.VIEW Press the button and then D or E button to select the TIME menu. Clock. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Clock Off Time On Time Auto Sleep Time Zone Press the G button and then F or G button to select either the year, date, or time option. Once selected, use the D or E button to set the year, date, and time options. Move Prev. TIME SETTING Press the button to return to normal TV viewing. Clock Off Time On Time Auto Sleep Time Zone G Time Date Year 0 Apr 007 8

87 AUTO ON/OFF TIMER SETTING The Off time automatically switches the set to standby at the preset time. Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time. Off time function overrides On timer function if they are set both to the same time. The set must be in standby mode for the On timer to work. I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Q.VIEW Press the button and then D or E button to select the TIME menu. Off time/on Time. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Clock Off Time On Time Auto Sleep Time Zone 5 6 On. To cancel On/Off Time function, select Off. Press the G button and then D or E button to set the hour. Press the G button and then D or E button to set the minutes. For only On time function Clock Off Time On Time Auto Sleep Time Zone Move Prev. G Off On 8 : 00 Volume Mode TV 0 TIME SETTING Programme: Press the G button and then D or E button to select TV, DTV or Radio in the Mode menu. And then, Press the G button and then D or E button to select the programme. 5 6 Volume: Press the G button and then D or E button to adjust volume level at turn-on. 7 Press the button to return to normal TV viewing. 85

88 TIME SETTING AUTO SHUT-OFF SETTING If set to on and there is no input signal, the set turns off automatically after 0 minutes. I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Q.VIEW Press the button and then D or E button to select the TIME menu. Auto Sleep. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Clock Off Time On Time Auto Sleep Time Zone Off or On. Press the button to return to normal TV viewing. Move Prev. TIME SETTING Clock Off Time On Time Auto Sleep Time Zone G Off On 86

89 TIME ZONE SETUP When you select a Time Zone city, TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) information which is received to broadcasting signal when time is set automatically by a digital signal. I/II SLEEP RATIO TEXT PICTURE SUBTITLE TV/RADIO SOUND Press the button and then D or E button to select the TIME menu. Q.VIEW Time Zone. Press the G button and then F or G button to select your viewing area time zone. Press the button to return to normal TV viewing. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Clock Off Time On Time Auto Sleep Time Zone Move Prev. SLEEP TIMER SETTING You don t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time has elapsed. Clock Off Time On Time Auto Sleep Time Zone G Time Zone London GMT TIME SETTING a Press the SLEEP button repeatedly to select the number of minutes. The display Min. will appear on the screen, followed by 0, 0, 0, 60, 90, 0, 80 and 0. b c When the number of minutes you want is displayed on the screen, the timer begins to count down from the number of minutes selected. To view the remaining sleep time, press the SLEEP button once. d To cancel the sleep time, repeatedly press the SLEEP button until the display Min. appears. e When you switch the set off, the set releases the preset sleep time. 87

90 PARENTAL CONTROL / RATINGS I/II SOUND SET PASSWORD & LOCK SYSTEM TEXT If you first enter the password, press 0, 0, 0, 0 on the remote control handset. Q.VIEW LIST 0 LIST 0 Q.VIEW SIZE UPDATE INDEX HOLD Press the button and then D or E button to select the OPTION menu. Lock System. SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode PARENTAL CONTROL / RATING Press the G button and then F or G button to select On. To set the password Press the G button and then use NUMBER buttons to input a -digit password. Be sure to remember this number! Re-enter new password for confirm. If you forgot your password, press 7, 7, 7, 7 on the remote control handset. Press the button to return to normal TV viewing. Move Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode Prev. G Lock Off Set Password New Confirm 88

91 I/II SOUND PARENTAL CONTROL TEXT INPUT MODE D/A POWER TV TV/RADIO DVD INPUT BRIGHT VCR This function operates according to information from the broadcasting station. Therefore if the signal has wrong information, this function dose not operates. Q.VIEW Lets you set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. This set is programmed to remember which option it was last set to even if you turn the set off LIST 0 SIZE UPDATE INDEX HOLD LIST 0 Q.VIEW Press the button and then D or E button to select the OPTION menu. Parental Control. Then, press the G button to enter the password as requested. The TV is set up with the initial password SETUPO PICTUREO AUDIOO TIMEO OPTIONO SCREENO Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode 5 Parental Guidance or Key Lock. Parental Guidance (In Digital mode only) Prevents children from watching certain adult s TV programmes, according to the ratings limit set. Key Lock The set can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. Press the F or G button to make appropriate adjustments. Press the button to return to normal TV viewing. Move Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode Prev. G Parental Guidance Off Key Lock Off PARENTAL CONTROL / RATING In Key Lock On, if the set is turned off, press the r / I, INPUT, D or E button on the set or POWER, INPUT, D/A, D or E (or + or -) or NUM- BER buttons on the remote control. With the Key Lock On, the display Key Lock On appears on the screen if any button on the front panel is pressed while viewing the set. 89

92 TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information. SWITCH ON/OFF Press the TEXT button to switch to teletext. The initial page or last page appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT or button to switch off teletext. The previous mode reappears. SIMPLE TEXT A Page selection Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. The D or E (or + or -) button can be used to select the preceding or following page. TOP TEXT TELETEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block / group / page selection With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the D (or +) button can be used. The red button permits to return to previous selection. Alternatively the E (or -) button can be used. A Direct page selection Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode. 90

93 FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection Press the i button to select the index page. You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. The D or E (or + or -) button can be used to select the preceding or following page. SPECIAL TELETEXT FUNCTIONS? A REVEAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. A UPDATE Displays the TV picture on the screen while waiting for the new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Press this button to view the updated teletext page. A TIME When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, D or E (or + or -) or NUMBER buttons. Press again to exit this function. TELETEXT A HOLD Stops the automatic page change which will occur if a teletext page consists of or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inhibited. To continue press this button again. 9

94 DIGITAL TELETEXT *This function works in UK only. The set gives you access to a digital teletext which is greatly improved in various aspects such as text, graphics and so on. This digital teletext can be accessed by special digital teletext services and specific services which broadcast digital teletext. You should select off from the subtitle language to display teletext by pressing SUBTITLE button. TELETEXT WITHIN DIGITAL SERVICE Press the numeric or D or E (or + or -) button to select a digital service which broadcasts digital teletext. To know which are digital teletext services, refer to the EPG service list. Follow the indications on digital teletext and move onto the next step by pressing TEXT,, D or E, F or G, RED, GREEN, YELLOW, BLUE or NUMBER buttons and so on. To change digital teletext service, just select a different service by the numeric or D or E (or + or -) button. If pressing the, or button, the teletext service disappear temporarily. When pressing these buttons again, the teletext service is appeared. TELETEXT IN DIGITAL SERVICE APPENDIX Press the numeric or D or E (or + or -) button to select a certain service which broadcasts digital teletext. Press the TEXT or colour button to switch on teletext. Follow the indications on digital teletext and move onto the next step by pressing, D or E, F or G, RED, GREEN, YELLOW, BLUE or NUMBER buttons and so on. Press the TEXT or colour button to switch off digital teletext and return to TV viewing. Some services may allow you to access text services by pressing the RED button. If pressing the, or button, the teletext service disappear temporarily. When pressing these buttons again, the teletext service is appeared. 9