VL160F111-4 LED DOT MATRIX MODULE

Transcription

1 VISSEM ELECTRONICS CO., LTD R&D DIVISION 395, Cheongdeok-dong, Giheung-gu, Yongin-city, Gyeonggi-do, KOREA TEL: ~5 FAX: ~1 LED DOT MATRIX MODULE VL160F111-4 (2ⅹ1) ISSUED DATE ITEM DESIG CHECK APPROVAL REFERENCE VER QN SIGNATURE DATE

2 1.MODEL NAME : VL160F FEATURES Structure ITEM Display Color Size(W X H X D) Dot Pitch Number Of Dots Leds Per Dot Weight Drive Mode Application DESCRIPTION Full Color X X 60.4(mm) 10(mm) 512(32 16) Dots R:1, PG:1,B:1 Max.1(kg) 1/4 Duty Drive OUTDOOR, WATERPROOF, HOOD 3. ABSOLUTE MAXIMUN RATINGS ITEM SYMBOL VALUE UNIT REMARK V LED 0~+5.5 Supply Voltage V V CC 0~+6.0 Signal Input Voltage Level V IH, V IL -0.3~ V CC +0.3 V Operating Temperature T OP [1] -10 ~ +60 Storage Temperature T stg -20 ~ +80 NOTES : [1] Temperature of led surface s should be remained below 60 in case of necessity, led system requires cooling fan. 4. RECOMMENDABLE OPERATING CONDITIONS ITEM SYMBOL MIN. TYP. MAX. UNIT REMARK Supply Led V LED Voltage Logic Circuit V CC V V IH 0.7 V CC - V CC Signal Input Voltage Level V IL V CC Operating Temperature T OP 0~35 5. ELECTRICAL CHARATERISTICS (AT T a = 25 ) ITEM SYMBOL VALUE UNIT REMARK Clock Frequency F MAX.16 MHz Current Consumption For l LED MAX. 8.5 Module I IC MAX. 0.5 A ALL On VL160F /10

3 6. OPTICAL CHARACTERISTICS( AT T a = 25 ) ITEM SYMBOL MIN. TYP. MAX. UNIT REMARK RED 2, Brightness Wavelength Viewing Angle [REFERENCE] GREEN 8, L V BLUE WHITE 10, RED GREEN λ p BLUE HOR θ 1/2 VER These are just brightness of standard model. If you have any cd/ m2 nm deg( ) Half Value questions about higher brightness, Please contact us. 7. SIGNAL FUNTION 1) DATA SIGNAL CONNECTOR PIN MAP (IN) PIN NUMBER PIN NAME FUNCTION DESCRIPTION 2,4,6,8 RED0~RED3 DATA INPUT FOR RED COLOR TOP VIEW 10,12,14,16 GRN0~GRN3 DATA INPUT FOR GREEN COLOR 18,20,1,3 BLUE0~BLUE3 DATA INPUT FOR BLUE COLOR 5[LSB],7[MSB] A[0:1] 2BITS LINE ADDRESS 9 SCLK SHIFT CLOCK FOR INPUT DATA 11 LATCH DATA STROBE 13 ROE RED COLOR BRIGHTNESS CONTROL 15 GOE GREEN COLOR BRIGHTNESS CONTROL 17 BOE BLUE COLOR BRIGHTNESS CONTROL 19,21,22,23,24,25,26 GND GROUND OF THE MODULE PIN MAP (OUT) PIN NUMBER PIN NAME FUNCTION DESCRIPTION 2,4,6,8 RED0~RED3 DATA OUTPUT FOR RED COLOR TOP VIEW 10,12,14,16 GRN0~GRN3 DATA OUTPUT FOR GREEN COLOR 18,20,1,3 BLUE0~BLUE3 DATA OUTPUT FOR BLUE COLOR 5[LSB],7[MSB] A[0:1] 2BITS LINE ADDRESS 9 SCLK SHIFT CLOCK FOR OUTPUT DATA 11 LATCH DATA STROBE 13 ROE RED COLOR BRIGHTNESS CONTROL 15 GOE GREEN COLOR BRIGHTNESS CONTROL 17 BOE BLUE COLOR BRIGHTNESS CONTROL 19,21,22,23,24,25,26 GND GROUND OF THE MODULE VL160F /10

4 2) POWER CONNECTOR PIN MAP(POWER) PIN NUMBER PIN NAME FUNCTION DESCRIPTION 1 V CC Supply Voltage For IC FRONT VIEW 2,3 V LED Supply Voltage For LED 4,5,6 GND Ground Of The Module LED Module POWER CABLE LENTH : 100mm 3)CONNECTOR CABLE SPECIFICATION - DATA CABLE 26 PIN Cable (Pitch 2.54mm) CAUTION : There is no need for data cable to connect in between modules. Only, there is need for data cable to connect between controller and module. The data cable s length depend on customer s condition - POWER CABLE 250MM CONNECTOR VENDOR MODEL NO. STANDARD CABLE ASS`Y IN,OUT DATA GY CONNECTOR IDC/EJ-26P 26PIN, 2.54mm PITCH IDC/EJ-26P-100-GBT200 POWER GY CONNECTOR LH PIN, 4.2mm PITCH LH GBH01-100MM This connectors can be changed without a previous notice for quality improvement. VL160F /10

5 8. SIGNAL & POWER CABLE CONNECTION 1) DIRECTION OF DATA FRONT VIEW DRIECTION OF DATA SHIFT ㆍㆍㆍ ㆍㆍㆍㆍ ㆍㆍㆍㆍ ㆍㆍㆍ MODULE(A) MODULE(B) 2)SIGNAL CABLE CONNECTION EXAMPLE REAR VIEW CONNECTOR & CABLE IN OUT OUT INTER- FACE MODULE (1, 2) (1, 4) CIRCUIT IN OUT OUT (2, 2) (2, 4) SCLK, ROE, GOE, BOE, LATCH, RED0~3, GREEN0~3, BLUE0~3 DATA, A0~A1 VS096F-08A VL160F111-4 IS CONSIST CONSIST OF 1PCSOF 1PCS mm ( Ⅹ160mm(32Ⅹ16 Dots) Dots) VL160F /10

6 9. BLOCK DIAGRAM LATCH SCLK RED0 GRN0 BLUE0 RED1 GRN1 BLUE1 LATCH_OUT SCLK_OUT RED0_OUT GRN0_OUT BLUE0_OUT RED1_OUT GRN1_OUT BLUE1_OUT 2 TO 4 LINE DECORDER & DRIVERS 32 8 LED DOT MATRIX 32 8 LED DOT MATRIX R_VR G_VR B_VR RED2 GRN2 BLUE2 RED3 GRN3 BLUE3 ROE GOE BOE A0 A1 RED2_OUT GRN2_OUT BLUE2_OUT RED3_OUT GRN3_OUT BLUE3_OUT ROE_OUT GOE_OUT BOE_OUT A0_OUT A1_OUT VL160F /10

7 10. TIMMING CHART CLOCK T su T h T R0,G0,B0 DATA R1,G1,B1 DATA R2,G2,B2 DATA R3,G3,B3 DATA T ckl T pw LATCH T el ROE (OUT-ENABLE) GOE (OUT-ENABLE) BOE (OUT-ENABLE) LINE ADDRESS (A0-A1) T epw T la T ae ADDRESS N ADDRESS N+1 DISPLAY LINE LINE N +4K LINE (N +1)+4K RED_LED ON/OFF DIPLAY ON OFF DISPLAY ON GREEN_LED ON/OFF DIPLAY ON OFF DISPLAY ON BLUE_LED ON/OFF DIPLAY ON OFF DISPLAY ON (K=0,1,2,3) CHARACTERISTICS SYMBOL MIN. MAX. UNIT CLOCK CYCLE T - 25 MHz DATA SETUP TIME T su 10 - ns DATA HOLD TIME T h 15 - ns LATCH PULSE WIDTH T pw 50 - ns LATCH HOLD TIME T ckl 15 - ns ENABLE-LATCH TIME T el 1 - us ENABLE PULSE WIDTH T epw 3 - us ADDRESS-ENABLE TIME T ae 1 - us LATCH-ADDRESS TIME T la 20 - ns VL160F /10

8 앞 앞 Handle 손잡이 앞 앞 11. DIMENSION MODEL VERSION UP DATE PAGE VL160F /10

9 Plate Work 2BY2 ARRAY VL160F /10

10 12. SAFETY Precautions in installing LED Module 1. Please escape the place where electromagnetic wave and noise is, which might cause malfunction to LED module, when install LED Display Board. 2. Since over voltage and reverse voltage might cause the problem in internal circuit and LED, please make sure and check the input voltage range, before operation. 3. Please escape the high humidity and leakage place which cause the LED module to be broken. 4. The temperature of the surface of LED module shall be under 60 during operation. 5. Heating from LED might cause damage in LED module or/and malfunction in LED display board, user shall prepare suitable ventilation and cooling facility. 6. Even though the brightness become lower and lower, after long time use, it's prohibited to input over voltage in order to increase the brightness, which might cause severe damage to LED Module. For the best operation, user shall operate LED module according to data sheet. 7. Please turn off the power supply, when display data are not charged. 8. Please be careful not to exposure LED Module to the dust, dirt, base, gas and other noxious gas, when install LED Display. 9. User shall consider the weight of LED module enough, when prepare steel structure and install LED Display Board. VL160F /10

11 Precautions in installing LED Module 1. Any jumper and switch is set up properly before delivery, please do not modify or/and change setting without consulting with manufacturer. 2. The circuit part of LED Module include CMOS components, please treat carefully with consideration of static electricity 3. Impact and vibration to LED Module might be the reason of disconnection and dot off, please escape those factors. 4. It's highly recommended to escape the high temperature & humidity and be careful not to exposure LED module to dust, dirt, base and SO2 Gas and other noxious Gas in order to escape the potential problem. 5. Please be careful not to be scratched and hurt on the surface of LED module. 6. It's prohibited to clean up LED module with solvent. In order to clean up LED module, it's highly recommended to use a piece of dried cloth and smooth brush. 7. Stacking LED modules without anti-impact material and wearing out the surface or/and edge of LED modules might cause fatal problem. 8. It's highly recommended to use twisted cable or shielded wire in order to remove the noise from high frequency. 9. When user use and store LED module, please pack LED module with anti-static material. VL160F /10