SPECIFICATION UMSH-8065MD-19T. Date: May

Transcription

1 Avnet Embedded. Support Around The Board SPECIFICATION UMSH-8065MD-19T Date: May 2010 If you require a touch panel solution. For information ontouch sensors, sensor driving and touch panel bonding solutions, scan the QR code or click the URL /products/displays/.html

2 SPECIFICATION OF May LIQUID CRYSTAL DISPLAY MODULE CUSTOMER : URT-STD Model No. : UMSH-8065MD-19T Model version : 0 Document Revision : 15 CUSTOMER APPROVED SIGNATURE This specification need to be signedby purchaser or customer as a specification ofproducts production and delivery from URT. Without signature of this specification, any purchase orderfor this model no. will betreated and considered that thisspecification is automatically acknowledged and accepted by purchaser or customer. UNITED RADIANT TECHNOLOGY CORPORATION Allen Wang George Tseng Angus Chiu Sharon Tsai May APPROVED CHECKED CHECKED PREPARED Date COMPANY : No. 2,Fu-hsing Road,Taichung Econamic Processing Zone,Tantzu,Taichung,Taiwan,R.O.C. TEL: FAX: Page: 1

3 Document Model No. Description Revision Revision Version No. by Tony Chan 0 UMSH-8065MD-T Jeffry Chen Version No Jul UMSH-8065MD-1T Version No. 0 1.Modify the FPC interface pins. H.C. Lin Jeffry Chen 2 UMSH-8065MD-2T Version No Add AD board on LCM. 2. Modify the module number from UMSH-8065MD-1T to UMSH-8065MD-2T. H.C. Lin Jeffry Chen 3 UMSH-8065MD-3T Version No Add touch panel on LCM. 2. Modify the module number from UMSH-8065MD-1T to UMSH-8065MD-3T. H.C. Lin Jeffry Chen 4 UMSH-8065MD-4T Version No Change to car-using specification. 2. Modify the module number from UMSH-8065MD-1T to UMSH-8065MD-4T. H.C. Lin Jeffry Chen 5 UMSH-8065MD-5T Version No Modify the module number from UMSH-8065MD-4T to UMSH-8065MD-5T. 2.Add touch panel on LCM. H.C. Lin Jeffry Chen UMSH-8065MD-6T Version No. 0 UMSH-8065MD-7T Version No. 0 UMSH-8065MD-8T Version No. 0 UMSH-8065MD-11T Version No. 0 UMSH-8065MD-11T Version No. 1 1.Add touch panel on LCM. 1. Improve display performance. 2. Modify the module number from UMSH-8065MD-T to UMSH-8065MD-7T. 1.Modify the module number from UMSH-8065MD-T to UMSH-8065MD-8T. 2.Change to car-using specification. 1.Modify the module number from UMSH-8065MD-T to UMSH-8065MD11T. 2.Modify the LED backlight to high brightness(500cd/ 1. Modify the specification of DC Characteristics. 2. Modify the description of interface pin. 3. Modify the Back-light only Specification Tony Chan Jeffry Chen 25-Jul-2007 H.C. Lin Jeffry Chen H.C. Lin Jeffry Chen 21-Sep-2007 H.C. Lin Jeffry Chen H.C. Lin Jeffry Chen 31-Mar-2008 UMSH-8065MD-12T Version No Add touch panel on LCM. 2. Modify the module number from UMSH-8065MD-11T to UMSH-8065MD-12T. H.C. Lin Jeffry Chen 4-Jul-2008 Page: 2

4 Document Model No. Description Revision Revision Version No. by UMSH-8065MD-12T Version No. 1 UMSH-8065MD-18T Version No. 0 UMSH-8065MD-18T Version No. 1 UMSH-8065MD-19T Version No. 0 1.Modify the Back-light only Specification 1. Improve the T/P newton ring. 2. Modify the module number from UMSH-8065MD-12T to UMSH-8065MD-18T. 1.Modify the Back-light only Specification 1. Change T/P number to URA MA Modify the module number from UMSH-8065MD-18T to UMSH-8065MD-19T. H.C. Lin Jeffry Chen 12-Dec-2008 Ken Lin Jeffry Chen 11-Mar-2010 Ken Lin Jeffry Chen 23-Apr-2010 Jenny Huang Jeffry Chen 18-May-2010 Page: 3

5 CONTENTS: No. Item Page BASIC SPECIFICATION 1.1 Mechanical Specification 1.3 Outline Dimension 6~7 1.4 Block Diagram 1.5 Interface Pin 9~11 ELECTRICAL CHARACTERISTICS Back-light 2.3 Command 2.4 AC Characteristics 15~ Touch Panel Specifications 27~29 OPTICAL CHARACTERISTICS 3.2 Definition of Optical Characteristics 31~32 RELIABILITY PRODUCT HANDING AND APPLICATION DATECODE PACKING & LOTNO 36~37 INSPECTION STANDARD 38~41 Page: 4

6 1. BASIC SPECIFICATION 1.1 Mechanical specifications Items Active screen size Nominal Dimension 3.5 diagonal Unit - Dot Matrix Module Size (W x H x T) Active Area (W x H) Dot Pitch (W x H) 320*RGB* x 63.9 x x x dots mm. mm. mm. Color depth 262K color Interface 8-bits serial/24-bits parallel RGB / CCIR601/656 - Driving IC Package COG - Module Weight 43 g * The maximum color depth of this driver IC is 262K colors,not 16.7M. 1.2 Display specification Display Descriptions Note LCD Type LCD Mode Polarizer Mode a-si TFT TN/Normally White Transmissive Polarizer Surface Normal - Pixel arrangement Backlight Type Viewing Direction(Gray inversion) RGB-stripe LED 6 O'clock Direction U.R.T Page: 5

7 1.3 Outline dimension Page: 6

8 Insulation Area T/P Viewing Area LCD Viewing Area Case Opening T/P Active Area LCD Active Area Case ITO Film Support ITO Layer Frame Touch Panel ITO Glass LCM Bezel LCD Module Page: 7

9 1.4 Block diagram: Page: 8 TFT-LCD 320xRGBx240 Dots 262K colors HX8238-A02 S959 S0 G0 G238 G1 G LED B/L A K 120 VSS POL RESB 8 DEN VSYNC VDDIO 120 RR0~RR7 DOTCLK RL BGR SEL0 CPE PINV VCI SDO CSB SCK SDI 8 8 BB0~BB7 GG0~GG7 HSYNC TB REV SEL1 SEL2 Power Generation Circuit NC 2 Touch Panel X1 Y1 X2 Y2

10 1.5 Interface pin : Page: 9

11 Page: 10

12 Page: 11

13 2. ELECTRICAL CHARACTERISTICS 2. Page: 12

14 2.2 DC Characteristics Back-light Characteristics Page: 13

15 2.3 Command ( Recommend by ) Page: 14

16 2-4 AC Characteristics bits serial/24-bits parallel RGB Page: 15

17 Page: 16

18 Page: 17

19 Page: 18

20 2-4-2 CCIR601 Timing Page: 19

21 Page: 20

22 2-4-3 CCIR656 Timing Page: 21

23 Page: 22

24 Page: 23

25 2-4-4 Power Up Sequence Page: 24

26 2-4-5 Power Down Sequence Page: 25

27 2-4-6 SPI Timing Page: 26

28 2-5 Touch Panel Specifications Display Descriptions Note Type Structure Surface Hardness Input mode Operating Force (Minimum Active Force) Connector Type 4-wires Analog Resistive Touch Panel ITO Film:T=0.188mm ITO Glass:T=0.7mm 3H Stylus or Finger 100 gf FPC H pencil, pressure 500g/45 (JIS-K5600) - Stylus R0.8mm (Active Area toward inner 2mm) Electric Characteristics Linearity Items Terminal Resistance Descriptions X-axis 1.5% Y-axis 1.5% X-axis: Ω Y-axis:50~600Ω Note Active Area toward inner 2mm - - U.R.T Revision 15 ; UMSH-8065MD-19T Ver. 0 ; May Page: 27

29 Durability Test Items Finger Touch Test Condition Repeating impact the surface of touch panel 1,000k times by R8.0 silicon rubber under 250g loading and 2 times/sec speed. Pen Sliding Test Drawing line in 30mm length at same location of touch panel surface 100k times by R0.8mm plastic stylus under 250g loading and 60mm/sec moving speed. ( Durability Test Position ) Touch Panel (Pen Sliding Test) Pen Sliding Test Touch Panel Finger Touch Test Center Point of Active Area (Finger Touch Test) Page: 28

30 Attention for Assembly and Operation Insulation Area T/P Viewing Area LCD Viewing Area Case Opening T/P Active Area LCD Active Area ITO Film ITO Layer ITO Glass LCM Bezel Case Support Frame Touch Panel LCD Module b.support need to be designed within the frame size. c.we suggest to the support thickness as 0.5mm, but customer should adapt suitable thickness according to thecase deformation. if the LCD Viewing area LCD Viewing area. (6) Never use double sided tape or glue in between the support and the ITO film, it will cause harm to ITO film or seperate the T/P with the ITO film. Page: 29

31 3. OPTICAL CHARACTERISTICS 3.1 Characteristics Electrical and Optical Characteristics No. Item symbol / temp. Min. Typ. Max. Unit Note Response Time Tr Viewing Angle Tf Contrast Ratio Cr Red x-code Rx 0.63 Red y-code Ry Green x-code Gx Green y-code Gy 5 Blue x-code Bx - Blue y-code By White x-code Wx White y-code Wy Brightness Y cd/m 2 Brightness Uniformity Hor. Ver. ms - - % - 2 degree U.R.T. Page: 30

32 3.2 Definition of optical characteristics Measurement condition : [Note 1] Definition of LCD Driving Vop and Waveform : [Note 2] Definition of Response Time [Note 3] Definition of Viewing Angle : [Note 4] Definition of Contrast Ratio : U.R.T Page:

33 [Note 5] Definition of measurement of Color Chromaticity and Brightness 480mm BM-7 LCD Module [Note 6] Definition of Brightness Uniformity W / 4 Active Area Height : H H / 4 Brightness Uniformity = Minimum Brightness of Point 1~9 Maximum Brightness of Point 1~9 Active Area Width : W [Note 7] Definition of Measurement of Reflectance 480mm BM-7 White Light Source (Ring) 15 deg. LCD Module or referance Page: 32

34 4. RELIABILITY : Item No Items Condition High temperature operating Low temperature operating High temperature storage Low temperature storage High temperature & humidity storage 70, 200 hours -20, 200 hours 80, 200 hours -30, 200 hours 6 Thermal Shock -30, 30min.<=> 80, 30min. storage 10 Cycles 7 8 Vibration test Drop test 10 => 55 =>10 => 55 => 10 Hz, within 1 minute Amplitude : 1.5mm. 15 minutes for each Direction ( X,Y,Z ) Packed, 100CM free fall, 6 sides, 1 corner, 3edges 50,000 hours Life time 25, 60%RH, * One single product test for only one item. * Judgment after test : keep in room temperature for more than 2 hours. - Current consumption < 2 times of initial value - Contrast > 1/2 initial value - Function : work normally Page: 33

35 5. PRODUCT HANDLING AND APPLICATION The LCD module contains a C-MOS LSI. People who operate the LCM should wear ESD protection eguipement to prevent ESD hurt on products. Do not input any signal before power is turned on. Do not take LCM from its packaging bag until it is assembled. Peel off the LCM protective film slowly since static electricity may be generated. Pay attention to the humidity of the work shop, 50~60%RH is satisfactory. Use a non-leak iron for soldering LCM. Do not touch the display surface or connection terminals area with bare hands.smudges on the display surface reduce the insulation between terminals. Cautions for soldering to LCM: Condition for soldering I/O terminals: Temperature at iron tip :350 ±15. Soldering time : 3~4sec./ terminals. Type of solder : Eutectic solder(rosin flux filled). PRECAUTION IN USE OF LCD Do not contact or scratch the front surface and the contact pads of a LCD panel with hard materials such as metal or glass or with one s nail. To clean the surface, wipe it gently with soft cloth dampened by alcohol. Do not attempt to wiped off the contact pads. Keep LCD panels away from direct sunlight, also avoid them in high-temperature & high humidity environment for a long period. Do not drive LCD panels by DC voltage. Do not expose LCD panels to organic solvent. Liquid in LCD is hazardous substance. In case a contact with liquid crystal material is occured, be sure to immediately wash such material away by soap and water. The polarizer is easily damaged and should be handle with special care. Don t press or rub it with hard objects. To avoid degradation of the device, do not store the module under the conditions of direct sunlight, high temperature or high humidity. Keep the module in bags designed to prevent static electricity charging under low temperature / normal humidity conditions(avoid high temperature / high humidity and low temperature below 0 ) Never use the LCD, LCM under 45 Hz, the liquid crystal will decomposition and cause permently damage on display!! For the application in medical care, safety and hazardous prodcuts or systems, an authorization from URT is required. URT will not responsible for any damage or loss which caused by the products without any authorization given by URT. This product is not allowed to be designed and used for military application and/or purpose. The delivery of this product to the countries and/or regions where the embargoes are imposed by U.N. is prohibited. The application and delivery of this product must comply with Startegic High-Tech Commodities (SHTC) export control and the sales to the embargoed and/or sanctioned countries or regions are strictly prohibited. Page: 34

36 6. DATE CODE OF PRODUCTS Date code will be shown on each product : YY MM DD - XXXX Year Month Day - Production lots Example: ==>Year 2009, May.,08rd, Batch no.03 Page: 35

37 7. PACKING Packing tray must be stacked with alternated direction to each others. To tacks packing trays in same direction will cause product damaged. Page: 36

38 Page: 37

39 8. INSPECTION STANDARD 8.1. QUALITY : THE QUALITY OF GOODS SUPPLIED TO PURCHASER SHALL COME UP TO THE FOLLOWING STANDARD THE METHOD OF PRESERVING GOODS AFTER DELIVERY OF GOODS FROM TO PURCHASER. PURCHASER SHALL CONTROL THE LCM AT ,AND IT MIGHT BE DESIRABLE TO KEEP AT THE NORMAL ROOM TEMPERATURE AND HUMIDITY UNTIL INCOMING INSPECTION OR THROWING INTO PROCESS LINE INCOMING INSPECTION (A) THE METHOD OF INSPECTION IF PURCHASER MAKE AN INCOMING INSPECTION, A SAMPLING PLAN SHALL BE APPLIED ON THE CONDITION THAT QUALITY OF ONE DELIVERY SHALL BE REGARDED AS ONE LOT. (B) THE STANDARD OF QUALITY ISO ( or MIL-STD-105E ), LEVEL SINGLE PLAN. CLASS AQL(%) CRITICAL 0.4 % MAJOR 0.65 % MINOR.5 % TOTAL.5 % EVERY ITEM SHALL BE INSPECTED ACCORDING TO THE CLASS. (C) MEASURE IF AS THE RESULT OF ABOVE RECEIVING INSPECTION, A LOT OUT IS DISCOVERED. PURCHASER SHALL BE INFORM SELLER OF IT WITHIN SEVEN DAYS. BUT FIRST SHIPMENT WITHIN FOURTEEN DAYS WARRANTY POLICY WILL PROVIDE ONE-YEAR WARRANTY FOR THE PRODUCTS ONLY IF UNDER SPECIFICATION OPERATING CONDITIONS. WILL REPLACE NEW PRODUCTS FOR THESE DEFECT PRODUCTS WHICH UNDER WARRANTY PERIOD AND BELONG TO THE RESPONSIBILITY OF 8.2. CHECKING CONDITION CHECKING DIRECTION SHALL BE IN THE 45 DEGREE AREA TO FACE THE SAMPLE CHECKER SHALL SEE OVER 30 cm. WITH BARE EYES FAR FROM SAMPLE AND USING 2 PCS. OF 20W FLUORESCENT LAMP. Page: 38

40 8.3. INSPECTION PLAN : CLASS ITEM JUDGEMENT CLASS 1. OUTSIDE AND INSIDE PACKAGE "MODEL NO.", "LOT NO." AND "QUANTITY" PACKING & SHOULD INDICATE ON THE PACKAGE. INDICATE 2. MODEL MIXED AND QUANTITY OTHER MODEL MIXED...REJECTED QUANTITY SHORT OR OVER...REJECTED 3. PRODUCT INDICATION "MODEL NO." SHOULD INDICATE ON THE PRODUCT Minor Critical Major 4. DIMENSION, ACCORDING TO SPECIFICATION ASSEMBLY LCD GLASS SCRATCH DRAWING. AND SCRIBE DEFECT. Major 5. VIEWING AREA POLARIZER EDGE OR LCD'S SEALING LINE IS VISABLE IN THE VIEWING AREA..REJECTED Minor 6. BLEMISH BLACK SPOT ACCORDING TO STANDARD OF VISUAL Minor WHITE SPOT IN THE LCD INSPECTION AND LCD GLASS CRACKS 7. BLEMISH BLACK SPOT ACCORDING TO STANDARD OF VISUAL Minor APPEARANCE WHITE SPOT AND SCRATCH ON THE POLARIZER 8. BUBBLE IN POLARIZER ACCORDING TO STANDARD OF VISUAL Minor INSPECTION 9. LCD'S RAINBOW COLOR STRONG DEVIATION COLOR ( OR NEWTON RING) OF LCD...REJECTED. Minor OR ACCORDING TO LIMITED SAMPLE ( IF NEEDED, AND INSIDE VIEWING AREA ) 10. ELECTRICAL AND OPTICAL ACCORDING TO SPECIFICATION OR Critical CHARACTERISTICS DRAWING. ( INSIDE VIEWING AREA ) ( CONTRAST VOP CHROMATICITY ETC ) ELECTRICAL 11.MISSING LINE MISSING DOT LINE CHARACTER...REJECTED Critical 12.SHORT CIRCUIT NON DISPLAY WRONG PATTERN WRONG PATTERN DISPLAY DISPLAY CURRENT CONSUMPTION OUT OF SPECIFICATION... REJECTED 13. PIN HOLE PATTERN DEFORMITY ACCORDING TO STANDARD OF VISUAL INSPECTION Critical Minor Page: 39

41 8.4. STANDARD OF VISUAL INSPECTION NO. CLASS ITEM JUDGEMENT (A) ROUND TYPE: DIAMETER (mm.) BLEMISH BLACK SPOT MINOR WHITE SPOT IN THE LCD. 0.1 < 0.2 BLEMISH BLACK SPOT 0.2 < < NOTE: =(LENGTH+WIDTH)/2 unit : mm. ACCEPTABLE Q'TY WHITE SPOT AND SCRATCH (B) LINER TYPE: unit : mm. ON THE POLARIZER LENGTH WIDTH ACCEPTABLE Q'TY W 0.03 L < W 0.05 L < W 0.07 DISREGARD < W FOLLOW ROUND TYPE DISREGARD 3 1 unit : mm. DIAMETER ACCEPTABLE Q'TY MINOR BUBBLE IN POLARIZER 0.15 DISREGARD 0.15 < < MINOR Dot Defect Bright dot N 4 Dark dot Pixel Define Items ACC. Q'TY N 4 Not 1: The definition of dot: The size of a defective dot over 1/2 of whole dot is regarded as one defective dot. Not 2: Bright dot: Dots appear bright and unchanged in size in which LCD panel is displaying under black pattern. Not 3: Dark dot: Dots appear dark and unchanged in size in which LCD panel is displaying under pure red, green,blue pattern. U.R.T. Page: 40

42 NO. CLASS ITEM JUDGEMENT MINOR CHIPPING Y > S REJ MINOR CHIPPING X or Y > S REJ MAJOR GLASS CRACK Y > (1/2) T REJ. 1. a> L/3, A>1.5mm MAJOR SCRIBE DEFECT REJ. 2. B : ACCORDING TO DIMENSION MINOR CHIPPING ( ON THE TERMINAL AREA ) REJ MINOR CHIPPING Y > (1/3) T ( ON THE TERMINAL SURFACE ) REJ MINOR CHIPPING Y > T REJ. Page: 41

43 Avnet EmBEDDED OFFICES Denmark Avnet Embedded Avnet Nortec A/S Ellekær Herlev Phone: Fax: denmark@avnet-embedded.eu Finland Avnet Embedded Avnet Nortec Oy Pihatörmä 1 B Espoo Phone: Fax: finland@avnet-embedded.eu FrancE Avnet Embedded Avnet EMG France SA Parc Club du Moulin à Vent, Bât 10 33, rue du Dr Georges Lévy Vénissieux Cedex Phone: Fax: bron@avnet-embedded.eu Avnet Embedded Avnet EMG France SA 14 avenue Carnot Massy Cedex Phone: Fax: paris@avnet-embedded.eu Avnet Embedded Avnet EMG France SA Les Peupliers II 35 avenue des Peupliers Cesson-Sévigné Phone: Fax: rennes@avnet-embedded.eu GERMANY (AUSTRIA, CZECH REPUBLIC, HUNGARY, POLAND, SWITZERLAND) Avnet Embedded Avnet EMG GmbH Gruber Straße 60c Poing Phone: Fax: poing@avnet-embedded.eu Avnet Embedded Avnet EMG GmbH Lötscher Weg Nettetal Phone: Fax: nettetal@avnet-embedded.eu ITALY (PORTUGAL, SPAIN) Avnet Embedded Avnet EMG Italy SRL Via Manzoni, Cusano Milanino Phone: Fax: milano@avnet-embedded.eu NETHERLANDS (BELGIUM, LUXEMBOURG) Avnet Embedded Avnet B.V. Takkebijsters BL Breda Phone: Fax: benelux@avnet-embedded.eu SWEDEN (NORWAY) Avnet Embedded Avnet Nortec AB Esplanaden 3 D Sundbyberg Phone: Fax: sweden@avnet-embedded.eu UNITED KINGDOM (IRELAND) Avnet Embedded 5a Waltham Park White Waltham Maidenhead Berkshire, SL6 3TN Phone: Fax: uk@avnet-embedded.eu All trademarks and logos are the property of their respective owners. No guarentee as to the accuracy, completeness or reliability of any information. Subject to modifications and amendments. 03/2013