Data File #F807-DST-005-Rev1. SmartTX Digital Blade Transmitters

Transcription

1 Data File #F807-DST-005-Rev1 SmartTX Digital Blade Transmitters

2 SmartParts Hardware SmartTransmitters for Intelligent Systems Experience a new way of monitoring your process Finesse digital SmartTransmitter blades are mounted within an enclosure in a Finesse bioreactor controller. The Virtual Transmitter module in Finesse TruBio software allows full access to all of each blade s functions, simulates a physical transmitter, and provides alarms and connectivity monitoring capability. TruFluor and TruTorr transmitters provide automatic input of calibration data from Finesse single-use sensor SmartChips and provide diagnostic information to the bioreactor control system. Key Benefits Plug-and-Play with all Finesse Single-Use or Sterilizable Sensors Digital Communication Virtual Transmitter Software Interface Cabinet Mounted Minimal Maintenance Automatically record single-use sensor lot and serial numbers Each Finesse single-use sensor contains a SmartChip with the lot and serial numbers and calibration data. TruFluor SmartTransmitters automatically collect the data from the SmartChip as soon as the sensor is connected. TruBio software then records the information for integration in the final batch report if required. Finesse SmartTransmitters can facilitate access to stored user calibration data depending on sensors used. Ready for multiple connections Output signals can be either analog or digital format. If requested by the user, SmartTransmitter technology can integrate customer-specific digital communication protocols into our industrial Ethernet open protocol. Finesse Single-Use Sensors

3 SmartParts Hardware Finesse SmartTransmitters TruSens The Finesse TruSens transmitter is a combined technology designed to monitor all conventional ph and dissolved oxygen (DO) sensors. It allows the connection of 2 resistance temperature detectors (RTDs) or 2 thermistor inputs to suit the user s preferred sensor technology in upstream processes. TruFluor TruFluor transmitters combine measurement of temperature with ph or dissolved oxygen values. They are fully compatible with TruFluor ph, DO, or ph+do2 SmartReaders to guarantee perfect monitoring of a single-use application. SmartScale The Finesse SmartScale transmitter provides precise weight values for dosing or feeding strategies. Whatever the sensor technology (load cell or balance), the SmartScale transmitter delivers an accurate signal that allows the user to perform multi-feeding application using only one device. TruTorr The TruTorr transmitter in combination with the Finesse TruTorr single-use headspace pressure sensor, monitors headspace pressure and minimizes artifact signals. BLADE TRANSMITTER PHYSICAL SPECIFICATIONS TruTorr TruFluor ph TruFluor DO TruSens SmartScale Case Material Rating Dimensions (H x W x D) Mounting Display RFI / EMI Operating Temperature Storage Temperature Relative Humidity Aluminum Bracket NEMA 1 (when mounted, same rating as enclosure) 130 x 35 x 128 mm (5.1 x 1.4 x 5 in) Enclosure mounted within utility tower Virtual transmitter in TruBio software (GAMP5) EN C to 45 C (41 F to 113 F) 0 C to 65 C (32 F to 149 F) 10% to 90% (Non-Condensing) TruTorr TruFluor ph TruFluor DO TruSens SmartScale Weight / Shipping Weight 0.1 / 0.3 kg (0.2 / 0.6 lb) 0.2 / 0.4 kg (0.4 / 0.8 lb)

4 Blade Transmitter ELECTRICAL SPECIFICATIONS SmartParts Hardware TruTorr TruFluor ph TruFluor DO TruSens SmartScale Power Supply 150 ma Signal Outputs Isolated, 4 to 20mA, 1x Pressure Digital, 1x ph, 1x Temperature Digital, 1x DO, 1x Temperature Isolated, 4 to 20 ma, 1x ph, 1x DO, 2x RTD, 2x Thermistor RTD Configuration 1x 2 Wires for ph, 1x Spare Configurable RTD (2 or 3 Wires) Isolated, 4 to 20 ma, 1x Weight Digital Modbus RS485 or Ethernet Output Accuracy ±0.1 ma N/A Analog ± 0.1 ma Digital N/A Analog ± 0.1 ma Digital N/A Transmitter Diagnostics Internal diagnostics for sensor and loop* LED failure, 4 to 20 ma loop errors or zeroing errors; reported directly in Finesse TruBio control software Internal diagnostics for sensor and loop* Calibration Based on NIST-traceable standards, entered automatically using SmartChip, optional 1-point standardization Based on NIST-traceable standards, entered automatically using SmartChip, optional 1-point standardization or 2-point calibration; can be read into TruBio with file transfer or memory stick *If a sensor loop is activated but no sensors are attached, the following errors will be seen: The DO current will drop and produce a low %SAT reading, the ph will be unstable and indeterminate, RTD channels will read maximum temperature, and the thermistor channels will read minimum temperature. SmartScale resolution: Internal: 24bit (1:1,677,716). Digital Interface: 0.01g Warranty: Each TruFluor Transmitter is warranted for one full year (12 months) from date of shipment against defects in material and workmanship.

5 Finesse Solutions, Inc. Global Headquarters 3501 Leonard Court Santa Clara, CA USA Toll free Tel Fax Europe Via Sogn Gieri 27a CH-7402 Bonaduz, Switzerland Benelux, Ireland & Scandinavia Van Slingelandtlaan JJ Zwijndrecht The Netherlands Asia-Pacific 3A Intl Business Park, #07-08 ICON@IBP Tower A Singapore Shanghai Every effort has been made to ensure the accuracy of the information in this document. However, Finesse reserves the right to change its products without notice. The following are Finesse Solutions, Inc. registered trademarks: TruView, TruBio, TruBio DV, TruBio µc, SmartOPC, TruService, TruTorr, TruFluor, TruLogic, TruConnect, TruMigrations, TruCables, TruHousings, SmartGlass, SmartRocker, TruDO, TrupH, SmartFactory, SmartChip, SmartSystems, SmartBag, SmartPuck, SmartReader, SmartBag Reader, SmartTray, SmartController, SmartSensor , Finesse Solutions, Inc. All other trademarks are the property of their respective owners.