PRODUCT SPECIFICATION
|
|
- Dortha Shelton
- 5 years ago
- Views:
Transcription
1 PRODUCT SPECIFICATION 6.2 Mono TFT LCD MODULE MODEL: Ver:1.4 < > Preliminary Specification < > Finally Specification CUSTOMER : CUSTOMER S APPROVAL SIGNATURE: DATE: APPROVED PM PD PREPARED BY REVIEWED REVIEWED BY
2 Revision History Revision Date Originator Detail Remarks Initial Release Modify PIN1 assignment P9,P10,P Modify Resolution P ZFY Add weight Add current Modify Chromaticity Transmissive Modify Inspection Specification Modify Reliability Specification Modify Outline Drawing Add LED working life Modify many details P4 P5 P6 P17 P22 P26 P5 P23/P24 2/26
3 Table of Contents No. Item Page 1. General Description Module Parameter Absolute Maximum Ratings DC Characteristics Backlight Characteristic Backlight Characteristic Backlighting circuit Optical Characteristics Optical Characteristics Definition of Response Time Definition of Contrast Ratio Definition of Viewing Angles Definition of Color Appearance Definition of Surface Luminance, Uniformity and Transmittance Block Diagram and Power Supply Interface Pins Definition AC Characteristics System Bus Timing for 6800 Series MPU System Bus Timing for 8080 Series MPU System Bus Timing for 4-line Serial MPU System Bus Timing for 3-line Serial MPU Quality Assurance Purpose Standard for Quality Test Nonconforming Analysis & Disposition Agreement Items Standard of the Product Visual Inspection Inspection Specification Classification of Defects Identification/marking criteria Packaging Reliability Specification Precautions and Warranty Safety Handling Storage Metal Pin (Apply to Products with Metal Pins) Operation Static Electricity Limited Warranty Packaging Outline Drawing /26
4 1. General Description The specification is a transmissive type color active matrix liquid crystal display (LCD) which uses amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT-LCD panel, driver Ics and a backlight unit. 2. Module Parameter Features Details Unit Display Size(Diagonal) 6.2 Display Mode Transmissive / Normally Black VA Resolution 640 x 320 Pixels View Direction WIDE VIEW Best Image Module Outline 151.3(H) x 88.3(V) x 2.8(T) (Note1) mm Active Area 140 (H) x70(v) mm Pixel Pitch (H) x (V) um Pixel Arrangement Mono Stripe Interface 8-bit 8080/8-bit 6800/3-line/4-line Interface Driver IC ST With or Without Touch Panel Without Operating Temperature -20~70 ºC Storage Temperature -30~80 ºC Weight 82 g Note 1: Exclusive hooks, posts, FFC/FPC tail etc. 3. Absolute Maximum Ratings V SS =0V, Ta=25ºC Item Symbol Min. Max. Unit VDDA V Supply Voltage VDDI V Storage temperature Tstg ºC Operating temperature Top ºC Note 1: If Ta below 50ºC, the maximal humidity is 90%RH, if Ta over 50ºC, absolute humidity should be less than 60%RH. Note 2: The response time will be extremely slow when the operating temperature is around -10, and the back ground will become darker at high temperature operating. 4/26
5 4. DC Characteristics Supply Voltage V SS =0V, Ta=25ºC Item Symbol Min. Typ. Max. Unit VDDA V VDDI V Logic Low input voltage V IL GND - 0.2*VDDI V Logic High input voltage V IH 0.8*VDDI - VDDI V Logic Low output voltage V OL GND - 0.2*VDDI V Logic High output voltage V OH 0.8*VDDI - VDDI V Current Consumption All White Logic Analog I CC+ I IN - (30) (50) ma 5. Backlight Characteristic 5.1. Backlight Characteristic Item Symbol Condition Min. Typ. Max. Unit Forward Voltage VF Ta=25 ºC, I F =20mA/LED V Forward Current IF Ta=25 ºC, V F =3.2V/LED ma Power dissipation PD W Uniformity Avg % LED working life(25 ) Hrs Drive method Constant current LED Configuration 18 White LEDs (6 LEDs in one string and 3 groups in parallel) Note1:LED life time defined as follows: The final brightness is at 50% of original brightness. The environmental conducted under ambient air flow, at Ta=25±2 ºC,60%RH±5%, I F =20mA 5.2. Backlighting circuit A K 5/26
6 6. Optical Characteristics 6.1. Optical Characteristics Item Symbol Condition Luminance on TFT( I f =20mA/LED) Specification Min. Typ. Max. Ta=25ºC, Unit Lv cd/m² Backlight On (Transmissive Mode) Contrast ratio(see 6.3) CR - TBD - Response time (See 6.2) Red Chromaticity Green Transmissive (See 6.5) Blue White Viewing Horizontal Angle (See 6.4) Vertical TR TF XR - TBD ms TBD - YR TBD - XG TBD - YG TBD - Backlight is on XB TBD - YB TBD - XW YW θx θx Center CR 10 Deg. φy φy NTSC Ratio(Gamut) - θ=0º - TBD - % 6.2. Definition of Response Time Normally Black Type (Negative) Relative Brightness Non-selected state Selected state Non-selected state 100% 90% 10% 0% Tr Tf Tr is the time it takes to change form non-selected stage with relative luminance 10% to selected state with relative luminance 90%; Tf is the time it takes to change from selected state with relative luminance 90% to non-selected state with relative luminance 10%. 6/26
7 Note : Measuring machine: LCD Normally White Type (Positive) Relative Brightness Non-selected state Selected state Non-selected state 100% 90% 10% 0% Tr Tf Tr is the time it takes to change form non-selected stage with relative luminance 90% to selected state with relative luminance 10%; Tf is the time it takes to change from selected state with relative luminance 10% to non-selected state with relative luminance 90%; Note : Measuring machine: LCD-5100 or EQUI 6.3. Definition of Contrast Ratio Contrast is measured perpendicular to display surface in reflective and transmissive mode. The measurement condition is: Measuring Equipment Eldim or Equivalent Measuring Point Diameter 3mm//1mm Measuring Point Location Active Area centre point A: All Pixels white Test pattern B: All Pixel black Contrast setting Maximum Definitions: CR (Contrast) = Luminance of White Pixel / Luminance of Black Pixel 6.4. Definition of Viewing Angles Measuring machine: LCD-5100 or EQUI 7/26
8 6.5. Definition of Color Appearance R,G,B and W are defined by (x, y) on the IE chromaticity diagram NTSC=area of RGB triangle/area of NTSC trianglex100% Measuring picture: Red, Green, Blue and White (Measuring machine: BM-7) 6.6. Definition of Surface Luminance, Uniformity and Transmittance Using the transmissive mode measurement approach, measure the white screen luminance of the display panel and backlight Surface Luminance: L V = average (L P1 :L P9 ) Uniformity = Minimal (L P1 :L P9 )/ Maximal (L P1 :L P9 )* 100% Transmittance = L V on LCD / L V on Backlight * 100% Note: Measuring machine: BM-7 X X/6 X/3 X/3 X/6 Display Area Y Y/6 Y/3 Y/3 Y/ /26
9 7. Block Diagram and Power Supply LCD Panel VCOM D[0:7] Data bus Source + Gate Driver & TCON IF1 IF0 ERD RWR CSB A0 RSTB Control 6.2 inch Signal input 640*320 Grayscale manipulation voltage DC/DC VDDI VDDA GND FPC Power BLU A1 A2 K1 K2 BLU 9/26
10 8. Interface Pins Definition No. Symbol Function Remark 1 GND Ground 2 GND Ground 3 VDDA Power supply. 4 VDDI Power supply. 5 D0 6 D1 7 D2 When using 8-bit parallel interface(6800 or 8080 mode): 8-bit bi-directional data bus. 8 D3 When using serial interface:3-line or 4-line: 9 D4 D7: Serial input clock (SCL). 10 D5 D0: Serial data (SDA). 11 D6 D[6:1]:fix to H by VDDI. 12 D7 13 NC No connection 14 NC No connection 15 NC No connection 16 NC No connection 17 NC No connection 18 NC No connection 19 NC No connection 20 NC No connection 21 NC No connection 22 NC No connection 23 NC No connection 24 NC No connection 25 NC No connection 26 NC No connection 27 NC No connection 28 NC No connection 29 GND Ground 30 NC No connection 31 NC No connection 32 GND Ground 33 NC No connection 34 NC No connection 35 RSTB Reset input pin. 36 NC No connection 37 A0 Data/Command identification pin 38 CSB Chip select input pin 10/26
11 39 RWR 40 ERD Read/Write execution control pin. When IF1 is L. IF0 MPU Type ERD Description H 6800 series E Read/Write control input pin. L 8080 series /RD Read enable input pin Read/Write execution control pin. When IF1 is L. IF0 MPU Type ERD Description H 6800 series R/W Read/Write control input pin. L 8080 series /WR Write enable input pin 41 NC No connection 42 NC No connection 43 IF0 44 IF1 IF1 IF0 Selected Interface L L 8-bit 8080 parallel interface L H 8-bit 6800 parallel interface H L 3-line serial interface H H 4-line serial interface 45 NC No connection 46 NC No connection 47 GND Ground 48 GND Ground 49 NC No connection 50 NC No connection PIN2 assignment No. Symbol Function Remark 1 A1 LED Anode. 2 A2 LED Anode. 3 K1 LED Cathode. 4 K2 LED Cathode. 11/26
12 9. AC Characteristics 9.1. System Bus Timing for 6800 Series MPU 12/26
13 9.2. System Bus Timing for 8080 Series MPU 13/26
14 9.3. System Bus Timing for 4-line Serial MPU 14/26
15 9.4. System Bus Timing for 3-line Serial MPU 15/26
16 10. Quality Assurance 10.1 Purpose This standard for Quality Assurance assures the quality of LCD module products supplied to customer Standard for Quality Test Sampling Plan: GB Single sampling, normal inspection Sampling Criteria: Visual inspection: AQL 1.5% Electrical functional: AQL 0.65% Reliability Test: Detailed requirement refer to Reliability Test Specification Nonconforming Analysis & Disposition Nonconforming analysis: Customer should provide overall information of non-conforming sample for their complaints After receipt of detailed information from customer, the analysis of nonconforming parts usually should be finished in one week If cannot finish the analysis on time, customer will be notified with the progress status Disposition of nonconforming: Non-conforming product over PPM level will be replaced The cause of non-conformance will be analyzed. Corrective action will be discussed and implemented Agreement Items Shall negotiate with customer if the following situation occurs: There is any discrepancy in standard of quality assurance Additional requirement to be added in product specification Any other special problem Standard of the Product Visual Inspection Appearance inspection: The inspection must be under illumination about lx, and the distance of view must be at 30cm ± 2cm The viewing angle should be 45 from the vertical line without reflection light or follows customer's viewing angle specifications Definition of area: A Zone: Active Area, B Zone: Viewing Area, 16/26
17 Eye Eye A zone B zone Basic principle: A set of sample to indicate the limit of acceptable quality level must be discussed by both us and customer when there is any dispute happened New item must be added on time when it is necessary Inspection Specification No. Item Criteria (Unit: mm) 01 Black / White spot Foreign material (Round type) Pinholes Stain b a Area Acc. Qty Size φ 0.20 Ignore 0.20<φ 0.50 N <φ 0 Particles inside cell. (Minor defect) φ= ( a + b) /2 Distance between 2 defects should more than 5mm apart. 02 Electrical Defect (Minor defect) Bright dot Display Area N 2 Total N 2 Dark dot N 4 N 4 Total dot N 4 N 4 Mura Not visible through 5% ND filter. Note1 Note 2 Remark: 1. Bright dot caused by scratch and foreign object accords to item 1. 17/26
18 W 03 Black and White line Scratch Foreign material (Line type) (Minor defect) L L Length Width Acc. Qty / W 0.1 Ignore L < W L> < W 0 Total 3 Distance between 2 defects should more than 3mm apart. Scratches not viewable through the back of the display are acceptable. 04 Glass Crack (Minor defect) Crack is potential to enlarge, any type is not allowed. Glass Chipping Pad Area: (Minor defect) 05 Length and Width Acc. Qty c > 3.0, b< c< 3.0, b< a<glass Thickness 18/26
19 06 Glass Chipping Rear of Pad Area: (Minor defect) Length and Width Acc. Qty c > 3.0, b< c< 3.0, b< c< 3.0, b< a<glass Thickness 07 Glass Chipping Except Pad Area: (Minor defect) Length and Width Acc. Qty c > 3.0, b< c< 3.0, b< c< 3.0, b< a<glass Thickness 08 Glass Corner Chipping: (Minor defect) Length and Width Acc. Qty c < 3.0, b< 3.0 Ignore a<glass Thickness Glass Burr: (Minor defect) 09 Length F < 1.0 Acc. Qty Ignore Glass burr don t affect assemble and module dimension. 19/26
20 10 FPC Defect: (Minor defect) a w a 10.1 Dent, pinhole width a<w/3. (w: circuitry width.) 10.2 Open circuit is unacceptable No oxidation, contamination and distortion. 11 Bubble on Polarizer (Minor defect) Diameter Acc. Qty φ 0.30 Ignore 0.30 <φ 0.50 N < φ N=0 12 Dent on Polarizer (Minor defect) Diameter Acc. Qty φ 0.25 Ignore 0.25 <φ 0.50 N < φ None 13 Bezel 14 Touch Panel 15 PCB 13.1 No rust, distortion on the Bezel No visible fingerprints, stains or other contamination. D: Diameter W: width L: length 14.1 Spot: D<0.25 is acceptable 0.25 D 0.4 2dots are acceptable and the distance between defects should more than 10 mm. D>0.4 is unacceptable 14.2 Dent: D>0.40 is unacceptable 14.3 Scratch: W 0.03, L 10 is acceptable, 0.03<W 0.10, L 10 is acceptable Distance between 2 defects should more than 10 mm. W>0.10 is unacceptable No distortion or contamination on PCB terminals All components on PCB must same as documented on the BOM/component layout Follow IPC-A-600F. 16 Soldering Follow IPC-A-610C standard 20/26
21 The below defects must be rejected Missing vertical / horizontal segment, 17.2 Abnormal Display No function or no display. Electrical Defect Current exceeds product specifications. (Major defect) 17.5 LCD viewing angle defect No Backlight Dark Backlight Touch Panel no function. Remark: LCD Panel Broken shall be rejected. Defect out of LCD viewing area is acceptable Classification of Defects Visual defects (Except no / wrong label) are treated as minor defect and electrical defect is major Two minor defects are equal to one major in lot sampling inspection Identification/marking criteria Any unit with illegible / wrong /double or no marking/ label shall be rejected Packaging There should be no damage of the outside carton box, each packaging box should have one identical label Modules inside package box should have compliant mark All direct package materials shall offer ESD protection Note1:Bright dot is defined as the defective area of the dot is larger than 50% of one sub-pixel area. Bright dot: The bright dot size defect at black display pattern. It can be recognized by 2% transparency of filter when the distance between eyes and panel is 350mm±50mm. Dark dot: Cyan, Magenta or Yellow dot size defect at white display pattern. It can be recognized by 5% transparency of filter when the distance between eyes and panel is 350mm±50mm. Note2: Mura on display which appears darker / brighter against background brightness on parts of display area. 21/26
22 11. Reliability Specification No Item Condition Quantity Criteria 1 High Temperature Operating 70, 96Hrs 2 2 Low Temperature Operating -20, 96Hrs 2 3 High Humidity 50, 90%RH, 96Hrs 2 4 High Temperature Storage 80, 96Hrs 2 5 Low Temperature Storage -30, 96Hrs 2 6 Thermal Cycling Test 7 Packing vibration 8 Electrical Static Discharge -20, 60min~70, 60min, 20 cycles. Frequency range:10hz~50hz Acceleration of gravity:5g X,Y,Z 30 min for each direction. Air:±4KV 150pF/330Ω 5 times Contact:±2KV 150pF/330Ω 5 times GB/T GB/T GB/T GB/T GB/T GB/T GB/T GB/T Drop Test (Packaged) Height:80 cm,1 corner, 3 edges, 6 surfaces. Note1. No defection cosmetic and operational function allowable. Note2. Total current Consumption should be below double of initial value 2 GB/T /26
23 12. Precautions and Warranty Safety The liquid crystal in the LCD is poisonous. Do not put it in your mouth. If the liquid crystal touches your skin or clothes, wash it off immediately using soap and water Since the liquid crystal cells are made of glass, do not apply strong impact on them. Handle with care Handling Reverse and use within ratings in order to keep performance and prevent damage Do not wipe the polarizer with dry cloth, as it might cause scratch. If the surface of the LCD needs to be cleaned, wipe it swiftly with cotton or other soft cloth soaked with petroleum IPA, do not use other chemicals Storage Do not store the LCD module beyond the specified temperature ranges Strong light exposure causes degradation of polarizer and color filter Metal Pin (Apply to Products with Metal Pins) Pins of LCD and Backlight Solder tip can touch and press on the tip of Pin LEAD during the soldering Recommended Soldering Conditions Solder Type: Sn96.3~94-Ag3.3~4.3-Cu0.4~1.1 Maximum Solder Temperature: 370 Maximum Solder Time: 3s at the maximum temperature Recommended Soldering Temp: 350±20 Typical Soldering Time: 3s Solder Wetting Pins of EL Solder Pin Lead Solder Pin Lead Recommended Not Recommended Solder tip can touch and press on the tip of EL leads during soldering No Solder Paste on the soldering pad on the motherboard is recommended Recommended Soldering Conditions Solder type: Nippon Alimit Leadfree SR-34, size 0.5mm Recommended Solder Temperature: 270~290 Typical Soldering Time: 2s Minimum solder distance from EL lamp (body):2.0mm No horizontal press on the EL leads during soldering bend EL leads three times is not allowed. 23/26
24 Solder Wetting Recommended The type of the solder iron: Not Recommended Solder Pad Recommended Not Recommended Operation Do not drive LCD with DC voltage Response time will increase below lower temperature Display may change color with different temperature Mechanical disturbance during operation, such as pressing on the display area, may cause the segments to appear fractured Do not connect or disconnect the LCM to or from the system when power is on Never use the LCM under abnormal condition of high temperature and high humidity Module has high frequency circuits. Sufficient suppression to the electromagnetic interface shall be done by system manufacturers. Grounding and shielding methods may be important to minimize the interference Do not display the fixed pattern for long time(we suggest the time not longer than one hour)because it may develop image sticking due to the TFT structure Static Electricity CMOS LSIs are equipped in this unit, so care must be taken to avoid the electro-static charge, by ground human body, etc The normal static prevention measures should be observed for work clothes and benches The module should be kept into anti-static bags or other containers resistant to static for storage Limited Warranty Our warranty liability is limited to repair and/or replacement. We will not be responsible for any consequential loss If possible, we suggest customer to use up all modules in six months. If the module storage time over twelve months, we suggest that recheck it before the module be used After the product shipped, any product quality issues must be feedback within three months, otherwise, we will not be responsible for the subsequent or consequential events. 24/26
25 13. Packaging TBD 25/26
26 14. Outline Drawing 26/26
Revision History. Rev:1.0. Revision Date Originator Detail Remarks
Revision History Revision Date Originator Detail Remarks 1.0 2018.01.11 ZFY Initial Release. New part is built base on. Improve PCB on board 2/23 Table of Contents No. Item Page 1. General Description...
DEM A TMH-PW-N
Display Elektronik GmbH TFT MODULE DEM 128128A TMH-PW-N 1,44 TFT Product Specification Ver.: 6 29.03.2016 Revision History Revision Date Detail Remarks 0 25.09.2014 Initial Release - 1 08.10.2014 Modify
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION 10.4 TN TFT LCD MODULE MODEL: Ver:1.0 < > Preliminary Specification < > Finally Specification CUSTOMER : CUSTOMER S APPROVAL SIGNATURE: DATE: APPROVED PM PD PREPARED BY REVIEWED REVIEWED
DEM A1 VMH-PW-N
Display Elektronik GmbH TFT MODULE DEM 480800A1 VMH-PW-N 4,0 TFT Product Specification Ver.: 2 14.09.2016 Revision History Revision Date Detail Remarks 0 25.07.2016 Initial Release - 1 02.08.2016 Modify
DEM A VMH-PW-N
Display Elektronik GmbH TFT MODULE DEM 4801280A VMH-PW-N 6,8 TFT Product Specification Ver.: 0 18.01.2017 Version: 0 PAGE: 1 Revision History Revision Date Originator Detail Remarks 0 18.01.2017 MH Initial
Display Elektronik GmbH TFT MODULE DEM O VMH-PW-N 7,0 TFT. Product Specification Ver.: 2
Display Elektronik GmbH TFT MODULE DEM 800480O VMH-PW-N 7,0 TFT Product Specification Ver.: 2 28.05.2015 Revision History Revision Date Detail Remarks 0 03.04.2015 Initial Release - 1 10.04.2015 Modify
Display Elektronik GmbH TFT MODULE DEM S TMH-PW-N 2,7 TFT. Product Specification Ver.: 2
Display Elektronik GmbH TFT MODULE 2,7 TFT Product Specification Ver.: 2 10.09.2018 Revision History Revision Date Originator Detail Remarks 0 29.06.2018 MH Initial Release - 1 27.07.2018 MH 2 10.09.2018
MODEL NAME: LMCP017TW 03 NV1
1.77 inch TFT LCD without Touch Panel SPECIFICATION MODEL NAME: LMCP017TW 03 NV1 Date: 2013 / 08 / 27 Customer Signature Customer Approved Date Approved By Reviewed By Revision History Revision Date Originator
Display Elektronik GmbH TFT MODULE DEM O VMH-PW-N (A-TOUCH) 7,0 TFT + Touch. Product Specification Ver.: 1
Display Elektronik GmbH TFT MODULE DEM 800480O VMH-PW-N (A-TOUCH) 7,0 TFT + Touch Product Specification Ver.: 1 28.05.2015 Revision History Revision Date Detail Remarks 0 16.04.2015 Initial Release 1 28.05.2015
Specification Sheet. Mode: Transmissive Type, Negative mode, 3.97 LTPS LCD module 16.7M color. Checked by PM QA BU
Specification Sheet Customer Part No. Product type ZRoHS Remarks TVL-55806GD040J-LW-G-AAN Mode: Transmissive Type, Negative mode, 3.97 LTPS LCD module 16.7M color Non-compliance Compliance Preliminary
TFT Display Module. Part Number E43RG34827LW2M300-R
Ph. 480-503-4295 NOPP@FocusLCD.com TFT CHARACTER UWVD FSC SEGMENT CUSTOM REPLACEMENT TFT Display Module Part Number E43RG34827LW2M300-R Overview 480x272(105.4x67.15), 8/16/18/24 bit RGB interface, WHITE
MODEL NAME: LMCP2024BQ N3-4RA1
2.4 inch TFT LCD with Touch Panel SPECIFICATION MODEL NAME: LMCP2024BQ N3-4RA1 Date: 2013 / 03 / 21 Customer Signature Customer Approved Date Approved By Reviewed By Revision History Revision Date Originator
TFT Display Module TFT CHARACTER UWVD FSC SEGMENT CUSTOM REPLACEMENT. Part Number. Overview. Ph E24RG12432LWIM800-C
Ph. 480-503-4295 NOPP@FocusLCD.com TFT CHARACTER UWVD FSC SEGMENT CUSTOM REPLACEMENT TFT Display Module Part Number E24RG12432LWIM800-C Overview 2.4 inch TFT: 240x320(42.72x60.26), 18- bit RGB; 8/16-bit
TFT LCD Module Product Specification
TFT LCD Module Product Specification DT035BTFT 3.5 (320(RGB) x 240 DOTS) TFT Module November 25, 2015 Remark: Contents in this document are subject to change without notice. No part of this document may
TFT LCD Module Product Specification
TFT LCD Module Product Specification DT035BTFT-PTS1 3.5 (320(RGB) x 240 DOTS) TFT Module with Capacitive Touch Screen October 28, 2016 Remark: Contents in this document are subject to change without notice.
CHIMEI INNOLUX DISPLAY CORPORATION
DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT043TN20 Date: 2010/05/10 Version: 01 Preliminary Specification Final Specification Remark 4.3 FOG (FPC:44.05mm) For Customer s Acceptance
DLC Display Co., Limited 德爾西顯示器有限公司
DLC Display Co., Limited 德爾西顯示器有限公司 MODEL No: DLC0220JZD-1 TEL: 86-755-86029824 FAX: 86-755-86029827 E-MAIL: sales@dlcdisplay.com WEB: www.dlcdisplay.com . Module Name: DLC0220JZD-1 Ver1.0 Record of Revision
DEM K SBH-PW-N
Display Elektronik GmbH LCD MODULE DEM 128064K SBH-PW-N Product Specification Ver.: 0 13/Nov./2009 Version: 0 PAGE: 1 SPECIFICATION FOR LCM MODULE MODULE NO: DEM 128064K SBH-PW-N Customer Approval: SIGNATURE
AMP DISPLAY INC. SPECIFICATIONS AMP DISPLAY INC 9856 SIXTH STREET RANCHO CUCAMONGA CA TEL: FAX:
AMP DISPLA INC. SPECIFICATIONS CUSTOMER CUSTOMER PART NO. AMP PART NO. APPROVED B DATE Approved For Specifications Approved For Specifications & Sample AMP DISPLA INC 9856 SITH STREET RANCHO CUCAMONGA
LCD MODULE SPECIFICATION
TECHNOLOGY CO., LTD. LCD MODULE SPECIFICATION Model : MI0220IT-1 Revision Engineering Date Our Reference DOCUMENT REVISION HISTORY DOCUMENT REVISION DATE DESCRIPTION FROM TO A 2008.03.10 First Release.
SPECIFICATION FOR TFT MODULE MODULE NO:AFS128160TG-1.8-N REVISION NO: 01
SPECIFICATION FOR TFT MODULE MODULE NO:AFS128160TG-1.8-N300001 REVISION NO: 01 Customer s Approval: PREPARED BY (RD ENGINEER) CHECKED BY APPROVED BY SIGNATURE HSH DATE 2011-12-8 2011-12-8 2011-12-8 DOCUMENT
ASI-T-3501NA5FN/D. Outline Dimension (W x H x D) 51.16x 86.45x2.0 mm Active Area x 75.6 mm. Transflective Normally black
Item Contents Unit Size 3.5 inch Resolution 480(RGB) x 800 / Interface RGB 24 bits / Technology type TFT active matrix / Pixel pitch 0.0945x0.0945 mm Pixel Configuration R.G.B. Vertical Stripe Outline
TFT LCD Module Product Specification
TFT LCD Module Product Specification DT050TFT-TS 5.0 (800(RGB) x 480 PIXELS) TFT Module with Resistive Touch Panel June 1, 2016 Remark: Contents in this document are subject to change without notice. No
SPECIFICATION FOR LCD MODULE MODULE NO: AFS320480TG-3.5-G REVISION NO: 00
SPECIFICATION FOR LCD MODULE MODULE NO: AFS320480TG-3.5-G010021 REVISION NO: 00 Customer s Approval: PREPARED BY (RD ENGINEER) CHECKED BY APPROVED BY SIGNATURE Alfred Fr. Li Sean DATE 2011-8-19 2011-8-19
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT050TN33 V.1 SPEC NO.: A050-33-TT-11 Date: 2008/11/25 Version: 01 Preliminary Specification Final Specification For Customer
DEM A SBH-CW-N
Display Elektronik GmbH LCD MODULE DEM 320240A SBH-CW-N Product specification Version : 0 05/03/2007 SPECIFICATION FOR LCM MODULE DEM 320240A SBH-CW-N Customer Approval: SIGNATURE DATE PREPARED BY (RD
T2432C13VR01 REV. B (3.5 DIGITAL TFT with LED BACKLIGHT) 1-Chip Solution
LCD MODULE (DEPARTMENT) SPECIFICATION T2432C13VR01 REV. B (3.5 DIGITAL TFT with LED BACKLIGHT) 1-Chip Solution CUSTOMER APPROVAL... STAMP AND SIGNATURE DATE: IMPORTANT NOTE: This document must be approved
SPECIFICATION FOR LCD MODULE MODULE NO: AFS480272TG-4.3-C REVISION NO: 00
SPECIFICATION FOR LCD MODULE MODULE NO: AFS480272TG-4.3-C020001 REVISION NO: 00 Customer s Approval: PREPARED BY (RD ENGINEER) CHECKED BY APPROVED BY SIGNATURE HSH DATE 2011-6-2 2011-6-2 2011-6-2 DOCUMENT
TFT LCD Module Product Specification
TFT LCD Module Product Specification DT028BTFT-TS 2.8 (240(RGB) x 320 PIXELS) TFT Module with Resistive Touch Panel June 1, 2016 Remark: Contents in this document are subject to change without notice.
DOCUMENT REVISION HISTORY 1:
PAGE 2 OF 22 DOCUMENT REVISION HISTORY 1: DOCUMENT REVISION FROM TO DATE DESCRIPTION CHANGED BY A 2007.10.30 First Release. PHILIP CHENG CHECKED BY PHILIP HO PAGE 3 OF 22 CONTENTS Page No. 1. GENERAL DESCRIPTION
SPECIFICATION FOR LCD MODULE MODULE NO: AFS240320TG-2.0-Y REVISION NO: 01
SPECIFICATION FOR LCD MODULE MODULE NO: AFS240320TG-2.0-Y100001 REVISION NO: 01 Customer s Approval: PREPARED BY (RD ENGINEER) CHECKED BY APPROVED BY SIGNATURE Fr. Li Sean Rio DATE 2011-11-02 2011-11-02
TFT LCD Module Product Specification
TFT LCD Module Product Specification DT022CTFT 2.2 (240(RGB) x 320 PIXELS) TFT Module January 9, 2018 Remark: Contents in this document are subject to change without notice. No part of this document may
SPECIFICATIONS CUSTOMER : GFTM043IA S_ CERTIFICATION : Revision Record PAGE 1/14 ISO 9001:2008 ISO 14001:2004. Environmentally Certified
SO 9001:2008 SO 14001:2004 SPECFCATONS CUSTOMER : MODEL NO. : GFTM043A480272-S_ VERSON DATE : : A 2012.04.03 CERTFCATON : Customer Sign Sales Sign ROHS Approved By Prepared By Revision Record Data(y/m/d)
Mono STN Display Module
Mono STN Display Module Product Specification Part No. YMS-12864-15CFCBDGL 128 x 64 STN Blue mode Display For more information, please visit www.andersdx.com or email info@andersdx.com Version 1.0 S FOR
SPECIFICATION FOR LCD MODULE MODULE NO: YB-TG320240S22A-N-A0
SPECIFICATION FOR LCD MODULE MODULE NO: YB-TG320240S22A-N-A0 Customer Approval: Accept Reject YEEBO NAME SIGNATURE DATE Prepare Check Verify Approval Electronic Engineer Mechanical Engineer 2019.01.18
SPECIFICATIONS MODEL NO. FN070MY03 LCD MODULE, 800(RGB) * 480 PIXELS,WITH CTP TYPE. Preliminary Specification Final Specification
REV 00 SPECIFICATIONS MODEL NO. FN070MY03 TYPE LCD MODULE, 800(RGB) * 480 PIXELS,WITH CTP Preliminary Specification Final Specification FANNAL CUSTOMER PREPARED CHECKED APPROVED APPROVED FANNAL ELECTRONICS
ASI-T-283DA5QN/D. Item Contents Unit. Size 2.83 inch. Resolution 240(RGB) x 320 / Interface 3-wire SPI &RGB / Technology type a-si /
Item Contents Unit Size 2.83 inch Resolution 240(RGB) x 320 / Interface 3-wire SPI &RGB / Technology type a-si / Pixel pitch 0.18x0.18 mm Pixel Configuration R.G.B. Vertical Stripe Outline Dimension (W
5.0 inch TFT LCD SPECIFICATION
5.0 inch TFT LCD Without Touch Panel SPECIFICATION MODEL NAME: LMCRA050Z H N1 Date: 2013 / 02 / 18 Customer Signature Customer Approved Date Approved By Reviewed By Record of Revision Version Revise Date
CLOVER DISPLAY LTD. LCD MODULE SPECIFICATION. Model: CV9162E _
LCD MODULE SPECIFICATION Model: - - - - _ Revision 10 Engineering Timmy Kwan Date 11 August 2010 Our Reference 9016 ADDRESS : ROOM 1006, 10/F WESTIN CENTRE, 26 HUNG TO ROAD, KWUN TONG, KOWLOON, HONG KONG.
Specification for Approval
Specification for Approval Customer: Model Name: Supplier Approval R&D Designed R&D Approved QC Approved Customer approval Peter Peng Jun YU DU AMSON ELECTRONICS CO.,LTD. Page 1 of 20 Revision Record REV
LCD Module Product Specification
LCD Module Product Specification 64128K FC BW-RGB 128 x 64 DOTS Monochrome Display with RGB Backlight June 8, 2018 Remark: Contents in this document are subject to change without notice. No part of this
SPECIFICATION FOR LCD MODULE
145 Royal Crest Court Unit 42 Markham, ON, Canada L3R 9Z4 Tel: 905-477-1166 Fax: 905-477-1782 http://www.orientdisplay.com SPECIFICATION FOR LCD MODULE Part No.: Rev: B00 Issued Date: 2009-10-14 AMG320240FR-M-W6WFDW-NV
SPECIFICATIONS FOR LCD MODULE
SPECIFICATIONS FOR LCD MODULE CUSTOMER CUSTOMER PART NO. ACMMI PART NO. AMG12864F DESCRIPTION APPROVED BY DATE PAGE 1 OF 1 DOCUMENT REVISION HISTORY: DATE PAGE DESCRIPTION 2005.12. 4 First release PAGE
DEM N1 TMH-PW-N
Display Elektronik GmbH TFT MODULE DEM 480272N1 TMH-PW-N (C-TOUCH) 4,3 TFT + PCT Product Specification Ver.: 0 22.06.2018 Revision History VERSION DATE REVISED PAGE NO. Note 0 22.06.2018 First issue Version:
T2432C15VQ01 REV. B (3.5 Digital TFT with Touch Panel) 1-Chip Solution
LCD MODULE (DEPARTMENT) SPECIFICATION T2432C15VQ01 REV. B (3.5 Digital TFT with Touch Panel) 1-Chip Solution CUSTOMER APPROVAL... STAMP AND SIGNATURE DATE: IMPORTANT NOTE: This document must be approved
DEM A SBH-PW-N
DISPLAY Elektronik GmbH CONTENTS LCD MODULE DEM 160160A SBH-PW-N Version : 4.1 29.01.2008 GENERAL SPECIFICATION MODULE NO. : DEM 160160A SBH-PW-N CUSTOMER P/N VERSION NO. CHANGE DESCRIPTION DATE 0 ORIGINAL
SPECIFICATION FOR LCD MODULE
SPECIFICATION FOR LCD MODULE MODULE NO: YB-TG480272S16A-N-A0 Customer Approval: Accept Reject YEEBO NAME SIGNATURE DATE Prepare Check Verify Approval Electronic Engineer Mechanical Engineer 2019/01/03
ASI-T-500MA6F5/D. Item Contents Unit. Size 5.0 inch. OutlineDimension(WxHxD) x76.20x5.00 mm. Active Area x mm
Item Contents Unit Size 5.0 inch Resolution 800(RGB) x 480 / Interface RGB 24 bits / Technology type a-si TFT / Pixel pitch 0.135x0.135 mm Pixel Configuration R.G.B. Vertical Stripe OutlineDimension(WxHxD)
LCD Module Product Specification
Website: www.displaytech.com.hk LCD Module Product Specification Product: DT022ATFT 2.2'' TFT Display Module (240RGBx320DOTS) Contents in this document are subject to change without notice. No part of
DEM A VMH-PW-N 5 TFT
Display Elektronik GmbH TFT MODULE DEM 7201280A VMH-PW-N 5 TFT Product Specification Ver.: 0 25.08.2017 Revision History VERSION DATE REVISED PAGE NO. Note 0 25.08.2017 First Issue Version: 0 PAGE: 2 Contents
Specification for Approval
Specification for Approval Customer: Model Name: Supplier Approval R&D Designed R&D Approved QC Approved Customer approval Peter Peng Jun YU DU AMSON ELECTRONICS CO.,LTD. Page 1 of 23 Revision Record REV
SPECIFICATION FOR LCM MODULE
145 Royal Crest Court Unit 42 Markham, ON, Canada L3R 9Z4 Tel: 905-477-1166 Fax: 905-477-1782 http://www.orientdisplay.com SPECIFICATION FOR LCM MODULE MODULE NO.: AMC0801CR-B-G6WFDY DOC.REVISION 00 Customer
LIQUID CRYSTAL DISPLAY MODULE
LIQUID CRYSTAL DISPLAY MODULE Standard Product Specification PRODUCT NUMBER LR2016 Product Mgr Quality Mgr Electrical Eng Document Control Date: Date: Date: Date: Approval for Specification only Approval
NHD YF-CTXI# TFT
User s Guide NHD-1.8-128160YF-CTXI# TFT (Liquid Crystal Display Graphic Module) 1.8 Diagonal 8/16 - bit interface 128x160 Resolution (portrait mode) White LED Backlight Tel: (847) 844-8795 Fax: (847) 844-8796
Record of Revision ASI-T-283DA3CN/D
Item Contents Unit Size 2.83 inch Resolution 240(RGB) x 320 / Interface CPU / Technology type a-si / Pixel pitch 0.18x0.18 mm Pixel Configuration R.G.B. Vertical Stripe Outline Dimension (W x H x D) 50.0x69.2x2.3
SPECIFICATION COG-T350MCQH-05
TECENSTAR Add: 5/F, Building B, Xingnan Industrial Zone, Lianping Administrative District, Dalingshan Town, Dongguan, China Tel: +86-769-8286 8210 Fax: +86-769 8286 8212 SPECIFICATION COG-T350MCQH-05 Preliminary
SPECIFICATION FOR LCD MODULE MODULE NO: YB-TG800480S25A-N-A0
SPECIFICATION FOR LCD MODULE MODULE NO: YB-TG800480S25A-N-A0 Customer Approval: Accept Reject APPROVAL FOR SPECIFICATIONS ONLY APPROVAL FOR SPECIFICATIONS AND SAMPLE WIMRD005-02-D Add: 7/F.,On Dak Industrial
SPECIFICATION FOR LCD MODULE
SPECIFICATION FOR LCD MODULE MODULE NO: AFK240400A0-3.2N6NTM REVISIO N NO: V01 Customer s Approval: PREPARED BY (RD ENGINEER) CHECKED BY APPROVED BY SIGNATURE DATE Orient Display (N.A.) Ltd. 145 Royal
LCD MODULE SPECIFICATION. Model : CV4162D _. Revision 10 Engineering Jackson Fung Date 17 October 2016 Our Reference 4406
LCD MODULE SPECIFICATION Model : - - - - _ Revision 10 Engineering Jackson Fung Date 17 October 2016 Our Reference 4406 ADDRESS : 1 st FLOOR, EFFICIENCY HOUSE, 35 TAI YAU STREET, SAN PO KONG, KOWLOON,
DATE DESCRIPTION CHANGED BY. CHECKED BY FROM TO A First Release. ZENG LI HUANG YUAN LIANG
PAGE 2 OF 18 DOCUMENT REVISION HISTORY DOCUMENT REVISION DATE DESCRIPTION CHANGED BY CHECKED BY FROM TO A 2010.07.15 First Release. ZENG LI HUANG YUAN LIANG PAGE 3 OF 18 CONTENTS Page No. 1. GENERAL DESCRIPTION
Mono FSTN Display Module
Mono FSTN Display Module Product Specification Part No. YMS-320240-16AABFUGL 320 x 240 FSTN Display For more information, please visit www.andersdx.com or email info@andersdx.com Version 1.0 S FOR LIQUID
RECORD OF REVISION Revision Date Page Contents Editor 2013/03/15 -- New Release Emil 2013/03/19 3 Correct the interface description. Emil 2013/03/28 1
SPECIFICATIONS FOR LCD MODULE CUSTOMER CUSTOMER PART NO. AMPIRE PART NO. AM-800600C4TMQW-A1H APPROVED BY DATE Approved For Specifications Approved For Specifications & Sample AMPIRE CO., LTD. 4F., No.116,
Microtech Technology Co. Ltd.
Microtech Technology Co. Ltd. PRODUCT SPECIFICATIONS MODULE NO. :MTF0240CMIL-06 REVISION :V3.0 DRAWING BY : QSC DATE : 2012-09-18 APPROVED BY : DATE : FOR CUSTOMER S APPROVAL CHECK BY: DATE : APPROVED
M1632 (Transflective type)
Issued date: 07 January 2002 Spec. No TD-S004 LIQUID CRYSTAL DISPLAY MODULE M1632 (Transflective type) Product Specification & Delivery Specification Approvals QA Design Customer approval 1. REVISION RECORD...2
CLOVER DISPLAY LTD. LCD MODULE SPECIFICATION. Model : ZCG12864R
LCD MODULE SPECIFICATION Model : - - - - Revision 00 Engineering PANWU Date 23 JAN 13 Our Reference ADDRESS : BLOCK B4, SHAHE INDUSTRIAL TOWN, NANSHAN, SHENZHEN, CHINA TEL : (86) 755-8609 6773 (SALES OFFICE)
LCD MODULE SPECIFICATION. Model: CG24064B _. Revision 00 Engineering Jackson Fung Date 19 June 2015 Our Reference X9056
LCD MODULE SPECIFICATION Model: - - - - _ Revision 00 Engineering Jackson Fung Date 19 June 2015 Our Reference X9056 ADDRESS : 1 st FLOOR, EFFICIENCY HOUSE, 35 TAI YAU STREET, SAN PO KONG, KOWLOON, HONG
DEM B SBH-PW-N (A-TOUCH)
DISPLAY Elektronik GmbH LCD MODULE DEM 128128B SBH-PW-N (A-TOUCH) Version :2 28/Dec/2007 GENERAL SPECIFICATION MODULE NO. : DEM 128128B SBH-PW-N (A-TOUCH) CUSTOMER P/N VERSION NO. CHANGE DESCRIPTION DATE
Product Specification
Customer: Model Name: Date: Version: Product Specification H0154PHQ 24I1804 Preliminary Specification Final Specification For Customer s Acceptance Approved by Comment Approved by Reviewed by Prepared
K430WQA-V4-F. Product
PAGE 1 OF 20 K430WQA-V4-F Product Standard LCD Module 480 x RGB x 272 Dots 4.3 16.7M colors TFT display Wide temperature With white LED backlight With touch screen Kentec Electronics (Displays) Limited
INNOLUX. Record of Revision. Version Revise Date Page Content /12/26 Initial Release
InnoLux copyright 2004 All rights reserved, Copying forbidden. Record of Revision Version Revise Date Page Content 1 2005/12/26 Initial Release Contents 1. General Specifications...1 2. Pin Assignment...2
128x64 COG Graphic Modules
128x64 COG Graphic Modules CI064-4021- Description IDS have introduced an unprecedented array of technologies and backlight colours to enhance your product design. Utilising our 128x64 COG module, designers
LCD Module Product Specification
Website: www.displaytech.com.hk LCD Module Product Specification Product: DT070ATFT & DT070ATFT-TS 7.0'' TFT Display Module (800RGBx480DOTS) Contents in this document are subject to change without notice.
LIQUID CRYSTAL DISPLAY MODULE
LIQUID CRYSTAL DISPLAY MODULE Standard Product Specification PRODUCT NUMBER LMR42315 Product Mgr Engineering Document Control Product No. LMR42315 REV. E Page 1 / 22 TABLE OF CONTENTS 1 MAIN FEATURES...
RECORD OF REVISION. DigiWise International Corporation. Version Revised Date Page Content V /05/29 -- First Issued. 5/29/2015 Page 2 of 21
TFT Module Specification MODEL: 13-101ZIEB00C1-S PRELIMINARY SPECIFICATION APPROVAL SPECIFICATION CUSTOMER APPROVED BY DATE: DESIGNED CHECKED APPROVED MICROTIPS TECHNOLOGY USA 3504 Lake Lynda Dr, Suite
SPECIFICATION FOR LCM MODULE
145 Royal Crest Court Unit 42 Markham, ON, Canada L3R 9Z4 Tel: 905-477-1166 Fax: 905-477-1782 http://www.orientdisplay.com SPECIFICATION FOR LCM MODULE MODULE NO.: AMG19264BR-B-Y6WFDY DOC.REVISION: 00
INNOLUX DISPLAY CORPORATION
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT065TN14 SPEC NO.: A065-14-TT-01 Date: 2010/02/02 Version: 01 Preliminary Specification Final Specification For Customer s Acceptance
SPECIFICATION COG-T350MTQV-01P
Add: 5/F, Building B, Xingnan Industrial Zone, Lianping Administrative District, Dalingshan Town, Dongguan, China Tel: +86-769-8286 8210 Fax: +86-769 8286 8212 SPECIFICATION COG-T350MTQV-01P Preliminary
Product Specification G32122X02 series
Product Specification G32122X02 series Crystal Clear Technology sdn. bhd. 16Jalan TP5 Taman Perindustrian Sime UEP 47600 Subang Jaya Selangor DE Malaysia. T: +603 80247099 F: +603 80247098 1.0 Table of
LCD MODULE SPECIFICATION. Model : CV4202C _. Revision 03 Engineering Timothy Chan Date 8 March 2018 Our Reference 4949
LCD MODULE SPECIFICATION Model : - - - - _ Revision 03 Engineering Timothy Chan Date 8 March 2018 Our Reference 4949 ADDRESS : 1 st FLOOR, EFFICIENCY HOUSE, 35 TAI YAU STREET, SAN PO KONG, KOWLOON, HONG
LCD MODULE SPECIFICATION. Model : CV12864B _. Revision 09 Engineering Kemp Huang Date 05 September 2014 Our Reference 4912
CLOVER DISPLAY LTD. LCD MODULE SPECIFICATION Model : CV12864B - - - - _ Revision 09 Engineering Kemp Huang Date 05 September 2014 Our Reference 4912 ADDRESS : 1 st FLOOR, EFFICIENCY HOUSE, 35 TAI YAU STREET,
SPECIFICATION FOR LCM MODULE
145 Royal Crest Court Unit 42 Markham, ON, Canada L3R 9Z4 Tel: 905-477-1166 Fax: 905-477-1782 http://www.orientdisplay.com SPECIFICATION FOR LCM MODULE MODULE NO.: AMG19248AR-B-Y6NFDY DOC. REVISION 02
ANDpSi025TD-LED 320 x 240 Pixels TFT LCD Color Monitor
320 x 240 Pixels TFT LCD Color Monitor The ANDpSI025TD-LED is a 2.5 active matrix color TFT LCD module, that is suitable for applications such as a portable television (NTSC), camcorder, digital camera
LCD MODULE SPECIFICATION FOR CUSTOMER S APPROVAL
LCD MODULE SPECIFICATION FOR CUSTOMER S APPROVAL CUSTOMER : Standard MODULE TYPE : NECY320240Q-002 APPROVED BY: (FOR CUSTOMER USE ONLY) Approved By Checked By Prepared By MT File No Date Issued CONTENTS
Microtech Technology Co. Ltd.
Microtech Technology Co. Ltd. PRODUCT SPECIFICATIONS MODULE NO. :MTF0240QTI-17 REVISION: V1.0 DRAWING BY : QSC DATE : 2016-05-25 APPROVED BY : DATE : FOR CUSTOMER S APPROVAL CHECK BY: DATE : APPROVED BY:
LCD MODULE SPECIFICATION. Model : CV4162C _. Date 9 July 2012 Our Reference 4938
LCD MODULE SPECIFICATION Model : - - - - _ Revision 06 Engineering Longson Yeung Date 9 July 2012 Our Reference 4938 ADDRESS : 1 st FLOOR, EFFICIENCY HOUSE, 35 TAI YAU STREET, SAN PO KONG, KOWLOON, HONG
LCD Module Product Specification
Website: www.displaytech.com.hk LCD Module Product Specification Product: DT043BTFT & DT043BTFT-TS 4.3'' TFT Display Module (480RGBx272DOTS) Contents in this document are subject to change without notice.
AU OPTRONICS CORPORATION. Specification for Approval. INCOMING INSPECTION STANDARD FOR A201SN02 TFT-LCD MODULES (A- Grade)
AU OPTRONICS CORPORATION Specification for Approval INCOMING INSPECTION STANDARD FOR A201SN02 TFT-LCD MODULES (A- Grade) The content of this technical information is subject to change without notice. Please
NHD EF-ASXV#
NHD-7.0-800480EF-ASXV# TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD- Newhaven Display 7.0-7.0 Diagonal 800480-800xRGBx480 Pixels EF- Model A- Built-in Driver / No Controller S- High
SPECIFICATION FOR LCD MODULE MODULE NO: YB-TG800480S32A-N-A0
SPECIFICATION FOR LCD MODULE MODULE NO: YB-TG800480S32A-N-A0 Customer Approval: Accept Reject YEEBO NAME SIGNATURE DATE Prepare Check Verify Approval Electronic Engineer Mechanical Engineer 2019/1/16 2019/
K90DWN0-V1-F. Product. 9 inch Diagonal 800 x 480 x RGB Dots 16.7M colors TFT display With white LED backlight With resistive touch screen
PAGE 1 OF 14 K90DWN0-V1-F Product 9 inch Diagonal 800 x 480 x RGB Dots 16.7M colors TFT display With white LED backlight With resistive touch screen Kentec Electronics (Displays) Limited URL: http://www.kentecdisplay.com.hk
T E. Product. Standard LCD Module 240 x RGB x 320 Dots K TFT LCD Wide temperature With white LED backlight
PAGE 2 OF 21 T0240-026-E Product Standard LCD Module 240 x RGB x 320 Dots 2.4 262K TFT LCD Wide temperature With white LED backlight Kentec Electronics (Displays) Limited URL: http://www.kentecdisplay.com.hk
APPROVED BY CUSTOMER
WE ARE PLEASED IN SENDDING YOU HEREWITH OUR SPECIFICATION AND DRAWING FOR YOUR APPROVAL. PLEASE RETURN TO US ONE COPY OF FOR APPOVAL WITH YOUR APPROVED SIGNATURES. YOUR MODULE NO.: OUR MODULE NO.: K430WQC-V3-FF
SPECIFICATION GEMINI TECHNOLOGY CO., LTD. Approval by Customer. NG,Problem survey: Product Model: K G035C3-TP. Quality Department by.
SPECIFICATION Product Model: K G035C3-TP Designed by R&D Checked by Quality Department by Approved by Approval by Customer OK NG,Problem survey: Approved By All Rights Reserved 1/18 Revision Record REV
Ver. Edi. Description Page Design by. 10/24/ New Drawing - Yuan. Modify Optical Characteristics Modify Drawing
TECH. CORP. SPECIFICATIONS CUSTOMER : PTC SAMPLE CODE : SH800480T013-IBA01 MASS PRODUCTION CODE : PH800480T013-IBA01 SAMPLE VERSION : 01 SPECIFICATIONS EDITION : 006 DRAWING NO. (Ver.) : LMD-PH800480T013-IBA01
MONO LCD MODULE MODEL: G0906A1FSN1G-A0 Ver:1.0
MONO LCD MODULE MODEL: G0906A1FSN1G-A0 Ver:1.0 < > Preliminary Specification < > Finally Specification CUSTOMER : CUSTOMER S APPROVAL SIGNATURE: DATE: APPROVED PM PD PREPARED BY REVIEWED REVIEWED BY 1/18
Tel: 1 (888) Fax: (407) Web:
Model No: Approved By Tel: 1 (888) 499-8477 Fax: (407) 273-0771 E-mail: mtusainfo@microtipsusa.com Web: www.microtipsusa.com RECORD OF REVISION Version Revised Date Page Content V1.0 2018/03/09 -- First
AMP DISPLAY INC. SPECIFICATIONS AMP DISPLAY INC 9856 SIXTH STREET RANCHO CUCAMONGA CA TEL: FAX:
AMP DISPLAY INC. SPECIFICATIONS CUSTOMER CUSTOMER PART NO. AMP PART NO. AM-240320MJTNQW-00H APPROVED BY DATE Approved For Specifications Approved For Specifications & Sample AMP DISPLAY INC 9856 SIXTH
SPECIFICATIONS MODEL NO. LCD MODULE, 800(RGB) * 480 PIXELS,WITH CTP TYPE. Preliminary Specification Final Specification VICTRONIX TECHNOLOLY LTD
REV 00 SPECIFICATIONS MODEL NO. TYPE VX-S99815-PT070WV LCD MODULE, 800(RGB) * 480 PIXELS,WITH CTP Preliminary Specification Final Specification VICTRONIX CUSTOMER PREPARED CHECKED APPROVED APPROVED VICTRONIX
256x128 COG Graphic Modules
256x128 COG Graphic Modules CI064-4073-XXX Overview IDS have introduced an unprecedented array of technologies and backlight colours to enhance your product design. Utilising our 256x128 COG module, designers
SPECIFICATION AGM 1602E-808
SPECIFICATION Atualizado pelo MKT em 31/07/2015 Revision Status Version Revise Date Page Content Modified By Ver4.0 2010.10.28 First Issued 2/17 Table of Contents No. Contents Page 1. FEATURES...4 2. MECHANICAL