Operating instructions III / 2004
|
|
- Lawrence Clarke
- 6 years ago
- Views:
Transcription
1 Operating instructions III / 2004 Light sensor TOUCH DIM LS LI OSRAM GmbH Costumer-Service-Center (CSC) Germany Steinerne Furt Augsburg, Germany Tel. : (+49) 1803 / (charges apply) Fax.: (+49) 1803 /
2 General Contents General Installation Operation Appendix Application and function... 2 Design and dimensions... 3 Wiring diagram... 3 Installation hints... 4 General functions... 5 Controlling brightness at the workplace... 5 Troubleshooting... 7 Technical data... 8 Application and function The TOUCH DIM LS LI sensor was developed to regulate and control the brightness at workplaces. The sensor measures the brightness. The lighting conditions at the workplace are maintained at a user-adjustable set point by providing artificial light according to the amount of available daylight. If there is more than sufficient daylight, the lighting control switches off the luminaire. The TOUCH DIM sensor can be installed in luminaires (e.g. floor-standing luminaires), or by use of a flush device box with adequate cover also into the ceiling. Good workplace lighting makes the working environment more comfortable. Energy savings of up to 50% can be made compared with conventional workplace lighting. Safety and installation information The unit should be installed and tested only by a qualified electrician. Power to the units must be switched off before any work is undertaken. The relevant safety and accident prevention regulations must be observed. The TOUCH DIM sensor is used exclusively for controlling electronic control gear type QUICKTRONIC INTELLIGENT LI (QTi LI...DIM) or HALOTRONIC INTELLIGENT LI (HTi LI..DIM). No further control units may be operated on the control line. Other applications are not permitted. They may destroy the TOUCH DIM LS/PD LI and other equipment. The maximal number of ECG and the maximal overall cable length between push button, sensor and ECG has to be respected (see Technical data). If the control cable is wired with external voltage, the unit may be destroyed. The TOUCH DIM Sensor may only be supplied with AC operating voltage. This is particularly important to remember if UPS systems are used. page 2 OSRAM - operating instructions TOUCH DIM LS LI
3 Installation Design and dimensions Wiring diagram L N PE Push button (manual control) L N S TOUCH DIM Sensor ECG QTi LI ECG QTi LI ECG QTi LI Lamp Lamp Lamp max. 4 QTi ECG or HTi transform ers signal wire length max. 10m Push button and sensor have to be connected to the same mains phase! ECG QTi LI Lamp OSRAM - operating instructions TOUCH DIM LS LI page 3
4 Installation Installation hints The sensor is connected to a 3 wire cable which is admitted for mains voltage. Parallel connection of several sensors is not allowed. The sensor is typically installed in luminaires, ceiling installation is possible by use of a flush device box and an adequate cover. When installing the sensor, please note the following: Avoid placing the sensor where it is directly exposed to light from other sources as this will lead to incorrect measurements. The sensor should be installed centrally in the sphere of action, so that all controlled lumnaires contribute with the same proportion to the measured brightness. Example: Office with 4 controlled luminaires: window controlled luminaire controlled luminaire possible place of installation window controlled luminaire controlled luminaire optimal place of installation Touch DIM Sensor 2m window min. 40 1m Height above window sill 0m 1m min. distance to window 2m 0m Diagram: minimal distance to windows page 4 OSRAM - operating instructions TOUCH DIM LS LI
5 Operation General functions Switching the luminaire on/off 1. Briefly press the switch once. The luminaire is switched on or off each time the switch is operated. Changing the brightness With the luminaire switched off: 1. Press the switch. Keep pressing the switch until the required brightness is reached. With the luminaire switched on: 1. Press the switch. Keep pressing the switch until the required brightness is reached. The luminaire goes on at minimum brightness. The longer the switch is pressed, the brighter the luminaire gets. When the switch is released the luminaire will remain at the brightness it has reached. The brightness will change. When the switch is released the luminaire will remain at the brightness it has reached. Switching between more and less brightness: 2. Release the switch then press it again. Keep pressing the switch until the required brightness is reached. Every time the switch is held down the unit toggles between more light and less light. Note: Changing the brightness deactivates brightness control. When the unit is switched on again brightness control is reactivated, if a set point value was is stored. Controlling brightness at the workplace Adjustment / Storage of the set point for brightness control 1. Change the brightness to the required level by holding down the switch. 2. Once the set point is reached, make a double click (switch pressed twice briefly within short time) within 30 s. The brightness will change. When the switch is released the luminaire will remain at the brightness it has reached. The brightness you have just set will be stored as the new set point. The luminaire will flash twice to confirm that this value has been stored. OSRAM - operating instructions TOUCH DIM LS LI page 5
6 Operation Deactivation of the brightness control Brightness control can be completely deactivated: 1. If the luminaire is switched on, switch off the luminaire by briefly pressing the switch. 2. Make a double click (switch pressed twice briefly within short time). The set point is erased and brightness control is now disabled and the luminaire will dim to 100%. To activate the brightness control again, store a new set point as described on the previous page. page 6 OSRAM - operating instructions TOUCH DIM LS LI
7 Appendix Troubleshooting The luminaire is not working. Possible cause: There is no power. Check if the luminaire is connected to power. The lamps are faulty. Replace them. The luminaire was switched off at the switch. Switch the luminaire on. The luminaire is not regulating its brightness to the set point. Possible cause: After setting the brightness you must press the switch twice within 30 seconds. If you press the switch later a set point will not be stored. Bear this time in mind. Brightness control is not started until 5 seconds after the set point has been set. Within this time any other switch operations are ignored. Bear this time in mind. Brightness control was deactivated by changing the brightness level with the switch. Switch the luminaire off and on again. Brightness control is deactivated because set point was erased. Store a new set point. The luminaire is not reacting as expected to switch operations. Possible cause: The switch is being pressed too long. Please note: Hold down the switch to change the brightness until the luminaire reaches the brightness level you want. For all other functions, just briefly press the switch. If you cannot remedy the problem, please contact the customer service department of your luminaire manufacturer. OSRAM - operating instructions TOUCH DIM LS LI page 7
8 Appendix Technical data Designation : TOUCH DIM LS LI, light sensor Operating voltage : V AC / 50 60Hz (no DC operation) Connections : L, N, S (signal) Interface : OSRAM specific, max. 4 QTi LI ECG or. 4 HTi transformers connectable overall length of signal Max. 10 m connection : Power consumption : approx. 0,5 W Operating temperature : 0C C Adjustable light value : lux measured at sensor resp. approx lux at desk surface Pollution severity: 2 Dry, not conductive to IEC 664 CE requirement : EMC to EN Dimensions: 63 x 29 x 21mm (L x W x H) Protection class: II Protection type: IP 20 The CE symbol signifies compliance with the relevant EU Directives. page 8 OSRAM - operating instructions TOUCH DIM LS LI
Professional-Practice
www.osram.com/ecg-lms Professional-Practice DALI MCU: Digital potentiometer with DALI Manual lighting control with the DALI MCU for rooms with grouped luminaires with as many as 50 ECG, with or without
More informationPRODUCT DATASHEET QTi DALI-T/E 2X18 42 DIM
QTi DALI-T/E 2X18 42 DIM QUICKTRONIC INTELLIGENT DALI DIM CFL ECG dimmable DALI for CFL AREAS OF APPLICATION Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100 Installation
More informationQTi DALI 2X14/24/ DIM
QTi DALI 2X14/24/220 240 DIM QUICKTRONIC INTELLIGENT DALI DIM T5 ECG dimmable DALI for FL 16 mm Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100 Product benefits Same luminous flux with direct
More informationQUICKTRONIC INTELLIGENT DALI DIM T8
QUCKTRONC NTELLGENT DAL DM T8 ECG dimmable DAL for FL 26 mm Areas of application _ Suitable for use in emergency lighting systems as per EN 50172/DN VDE 0108-100 _ nstallation in emergency lighting systems
More informationQUICKTRONIC FIT 8. Product family datasheet. ECG for FL 26 mm
QUICKTRONIC FIT 8 ECG for FL 26 mm Areas of application _ Open-plan offices, corridors and storage rooms _ Public buildings _ Strip lighting _ Suitable for emergency lighting (DC operation) _ Suitable
More informationThe systematic way to get more light In most cases, the lamp developments are effectively system developments as they also involve modern electronic
The systematic way to get more light In most cases, the lamp developments are effectively system developments as they also involve modern electronic control gear at every stage. This is the only way to
More informationLuminaire installation box Surface-mounted box Ceiling installation box
-Smart PTM Ambient light sensor and motion detector for constant lighting control uminaire installation box Surface-mounted box Ceiling installation box Overview: -SMART PTM i is an ambient light sensor,
More information4.0 Description. 2-channel operation D1 and D2 rated at 200 VA each. 1-channel operation D1 rated at 400 VA (see connection chap. 6.
_307 238_EN_LUXOR 405_310 410 01_D.qxd 21.09.16 10:54 Seite 1 Operating Manual Dimmer module 4050100 1.0 Designated use The LUXOR dimmer module expands the existing LUXOR series of devices. It switches
More informationQTi 2X28/54 DIM. Product datasheet. QUICKTRONIC INTELLIGENT DIM T5 ECG dimmable 1 10 V for FL 16 mm. Areas of application.
QTi 2X28/54 DIM QUICKTRONIC INTELLIGENT DIM T5 ECG dimmable 1 10 V for FL 16 mm Areas of application Suitable for emergency installations Industry Open-plan offices, corridors and storage rooms Public
More informationTectiv 220 Instructions for use
GB Tectiv 220 Instructions for use With teach-in: accepts the current brightness as an operating point with the press of a button. 1 On. Off. All by itself. The Gira Tectiv 220 reacts to movement. As soon
More informationSensor module. Safety instructions. Function Correct use. Product characteristics. Structure of the device. Operation. Ref.No.
Sensor module Ref.No.: SM 1608 V03 Safety instructions Caution! Electrical devices may only be installed and fitted by electrically skilled persons. Non-compliance with the installation information could
More informationGamma instabus. Technical product information
Gamma instabus Technical product information Universal dimmer N 554D31, 4 x 300 VA / 1x 1000 VA, AC 230 V Universal dimmer N 554D31 Control of dimmable lamps, including LED without minimum load Output
More informationOPTOTRONIC Intelligent
OPTOTRONIC Intelligent Compact constant current LED drivers Dimmable DALI Areas of application _ Installation in emergency lighting systems according to IEC 61347-2-13, appendix J _ Suitable for use in
More informationHYL-035D0850G103. Constant current LED driver DALI Dimmable. LED Driver. Product description. Benefits. Interfaces.
Constant current LED driver DALI Dimmable Product description Dimmable Independent constant current Adjustable output current between 350 and 1,050mA via DIP switch Max. output power 35 W Up to 88 % efficiency
More informationAs versatile as your requirements.
www.osram.com As versatile as your requirements. Simple, functional, flexible: lighting control with EASY Color Control. CONTENT One lighting control system for all occasions? Dynamic light is used in
More informationOrdering data. Type Inputs Outputs Dimming switch Motion sensor DSI signal2 Digital control line DSI Control output per physical output (devices)
luxcotro lighting control system Control module for amplifying signals Product description Multi-functional controller For amplifying the signal for a maximum of 50 devices or for cascading long lines
More informationMosaic TM Dimmer 3 x 1000 W
Mosaic TM Dimmer 3 x 1000 W 784 30 Technical characteristics (1) ( * ) 50/60 Hz 240 V~ 100 V~ 1 x 2,5 mm2 2 x 1,5 mm 2 Max. Min. Max. Min. < 2200 W (2) (do not exceed 1000 W per channel) 3 x 40 W < 1100
More informationTechnical Information
Reference: For use with LED light engines Geometry (l x w x h): Line voltage, nominal Perm. voltage fluctuations Line current, nominal Inrush current, typical Line frequency Protection Class Output operating
More informationArteorTM Dimmer 3 x 1000 W / /60
ArteorTM Dimmer 3 x 1000 W / 5740 10/60 Technical characteristics / * ( ) 50/60 Hz 1 x 2.5 mm 2 x 1.5 mm2 2 Max. < 2200 W(2) (do not exceed 1000 W per channel / Special provisions (see page 5) / 240 V~
More informationQUICKTRONIC DE LUXE HF DIM T8
QUICKTRONIC DE LUXE HF T8 ECG dimmable 1 10 V for FL 26 mm Areas of application Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100 Suitable for luminaires of protection class
More informationWE-EF LEUCHTEN. Technical information for Eco Step Dim Basic. Product ID
WE-EF LEUCHTEN Technical information for Eco Step Dim Basic Product ID 430-0001 Eco Step Dim Basic General information All WE-EF Eco Step Dim components are intended for professional users. Installation
More informationInstruction manual. DALI Gateway art Installation manual
Instruction manual DALI Gateway art. 01544 Installation manual Contents GENERAL FEATURES AND FUNCTIONALITY from page 5 ETS PARAMETERS AND COMMUNICATION OBJECTS from page 6 COMMUNICATION OBJECTS GENERAL
More informationBenefits. Applications
COINlight Pro - CP51 Preliminary Data Sheet Benefits Fits in MR16 luminare fixtures Usage without additional heat sink possible - 3.6 W with 50,000h @L70/Ta=25 C - 7.5 W with 25,000h @L70/Ta=25 C Life
More informationLUNA 129 star-time
310 248 01 LUNA 129 star-time 129 0 700 Dämmerungsschalter Bedienungsanleitung 3 12 Twilight switch Operating instructions 13 22 Interrupteur crépusculaire Mode d emploi 23 32 Schemerschakelaar Gebruiksaanwijzing
More informationHYL-080D1750G358. Constant current LED driver DALI Dimmable. LED Driver. Product description. Benefits. Interfaces.
Linear / area dimming Constant current LED driver DALI Dimmable Product description Dimmable built-in constant current LED Driver Adjustable output current between 1,050 and 1,750mA via DIP switch Max.
More informationPHASED OUT. Control module with 3 channels/single, twin push to make switches/ presence detector/modulardim power supply
For DI rail luxcotro modulardim Control module with channels/single, twin push to make switches/ presence detector/modulardim power supply The control module is the basis of the modulardim product range.
More informationInstallation Guide. HDMI 4x1 Switcher
Installation Guide HDMI 4x1 Switcher SY Electronics Ltd, Unit 7, Worrall Street, Salford, Greater Manchester, M5 4TH, United Kingdom Tel: +44 (0) 161 868 3450 Fax: +44 (0) 161 868 3459 The SY-HD-S41 is
More informationFigure 1: Device components
Order No. : 2860 10 Order No. : 2830 10 Operation- and Assembly Instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe
More informationSubstiTUBE Value ST8-HV5
www.osram.com SubstiTUBE Value ST8-HV5 Datasheet Innovative LED-lamp, easy and safe to use in CCG installations as direct retrofit. Energy saving potential of up to 66% by replacing 1.5 m T8 fluorescent
More informationLED DRIVERS. LQC4D-V1 4 channels. User Manual FEATURES
pag. 1/13 FEATURES Outputs: 4 x channels BUS+SEQUENCER+FADER+DIMMER+DRIVER Input: DC 12/24/48 Vdc BUS Command: DALI LOCAL Command: 4x N.O. push button (with or without memory), 0-10V, 1-10V Controls: dimmer,
More informationEmergency lighting units EM powerled
CE CPS 12/15 W ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation
More informationOperating Manual. Basic Control BC16. two-channel for eco moon
Operating Manual Basic Control BC16 two-channel for eco moon Dear Customer, Thank you for choosing a WALTRON daytime lighting controller. Your daytime lighting controller is a high-quality product that
More informationLED Driver Linear / area dimming industry. Driver LC 200W 1050mA UNV ADV IND ADVANCED series
Driver LC 200W 1050mA UNV ADV IND ADVANCED series Product description Independent constant current LED Driver For dry, damp and wet locations Max. output power 200 W Up to 93.7 % efficiency For luminaires
More informationOperating instructions
108183 2017-05-17 Page 1 0359 Operating instructions TPPL-EX series Hazardous environments luminaires Please read the instructions carefully before starting any works! Content: 1. Safety instructions 2.
More informationTempus Lux Digital Photoelectric Switch D GB CZ BZT Installation and operating instructions BZT27731
2 310380 01 Tempus Lux Digital Photoelectric Switch BZT27731 GB 0 6 12 18 24 Installation and operating instructions MENU OK 2 Lux 2000 BTZ27731 1 D GB CZ PL HR 1-2 2600 W 1-2-3 16A-10AX 250V~ 0,5mm -
More informationIP Roombox. Hotel Room Management
Hotel Room Management Hotel solutions Versatile room management system You need a simple solution which allows you to control all the hotel room electrical applications? Hager offers you a unique combination
More informationSystem 2000 System 2000 HLK relay insert. 1 Safety instructions. 2 Device components. 3 Function. Order No. : Operating instructions
Order No. : 0303 00 Operating instructions 1 Safety instructions Electrical equipment may only be installed and fitted by electrically skilled persons. Failure to observe the instructions may cause damage
More information2-output DALI controller
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 -output DALI controller Page. Use.... Technical features... 3. Overall dimensions.... 4. Connection... 5. Installation...3
More informationPreliminary Data sheet
www.osram.com/prevaled PrevaLED Bar Preliminary Data sheet Benefits Dimension 280 x 55 x 6,3 mm (l x w x h) Designed for fixtures with round shapes Efficacy: Over 112 lm/w Consistent white light < 3 SDCM
More informationInstruction Manual. Universal Flow Controller Model 261 / 261-EC-01
Universal Flow Controller Model 261 / 261-EC-01 Instruction Manual Type ARS 261-EC 01 Art.-no: 82212264 Table of Contents 1. Safety Instructions 2. Product ID - Dimensions 3. Function Description 4. Installation
More informationTri-level Control HF Sensor
Daylight Monitoring TM Ambient daylight threshold oop in oop out Tri-level Control HF Sensor HC403VRC-KD HC404VRC-KD Detached Version with Daylight Monitoring and Remote Control Applications Occupancy
More informationSubstiTUBE Value ST8V-0.6m
www.osram.com SubstiTUBE Value ST8V-0.6m Datasheet Innovative LED-lamp, easy and safe to use in CCG installations as direct retrofit. Energy saving potential of up to 64% by replacing 0.6 m T8 fluorescent
More informationEmergency lighting units EM powerled
E 15 W CE CPS ED Driver for AC and DC power supplies Product description ED Driver for mains operation with integrated Simple CORRIDOR FUCTIO (CF) For use in central battery systems For luminaire installation
More informationOT 100/ /700 P5
OT 100/120 277/700 P5 OPTOTRONIC Outdoor Constant current LED drivers Areas of application _ Street and urban lighting _ Industry _ Suitable for luminaires of protection class I Product benefits _ High
More informationSubstiTUBE Value EM ST8V-1.2m-17W-EM
www.osram.com SubstiTUBE Value EM EM Datasheet Technical operating data Product 865-EM 840-EM Color Colortemp. [K] Lum. Flux [lm] Cool Daylight 6500 K 1700 Cool White 4000 K 1700 830-EM Warm White 3000
More informationElectronic MICROSTAT-T Temperature controller with digital indication for use with resistance thermometers and thermocouples Series 8650
M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.de
More informationPRODUCT FAMILY DATASHEET QUICKTRONIC PROFESSIONAL DL
QUICKTRONIC PROFESSIONAL DL ECG for CFL AREAS OF APPLICATION Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100 Open-plan offices, corridors and storage rooms Public buildings Suitable for
More informationHigh Resolution Multicolor Contrast Scanner. Dimensioned drawing
Specifications and description KRTM 20 High Resolution Multicolor Contrast Scanner Dimensioned drawing en 01-2011/06 50116669 12mm 20mm 50mm 12-30 V DC 50 / 25 khz We reserve the right to make changes
More informationLED control gear Compact dimming. Uconverter LCAI 2x38 W 0500 K013 one4all ECO series. Ordering data
Product description Dimmable built-in for LED Constant current (with 2 adjustable output channels) Designed for outdoor and street luminaire Output power 2 x 38 W Suitable for mains voltage peaks (burst/surge)
More informationDALI TOUCHPANEL BASIC TW. Operating and control unit
BASIC Operating and control unit Product description Capacitive Touchpanel High-quality appearance with real glass display Multiple control modules are possible in a system Power supply via line Double
More informationNetterVibrotron SRF. Operating Instructions for. Series SRF. These operating instructions apply to. Netter Static Adjustable Frequency Control
Operating Instructions for Netter Static Adjustable Frequency Control Series SRF July 2016 No.1451E Page 1/23 These operating instructions apply to Netter Static Adjustable Frequency Control NetterVibrotron
More informationSubstiTUBE Advanced UO EM ST8AU-1.5m-24W-EM
www.osram.com SubstiTUBE Advanced UO EM ST8AU-1.5m-24W-EM Datasheet Innovative LED-lamp, easy and safe to use in CCG installations as direct retrofit. Energy saving potential of up to 63% by replacing
More informationOPTOTRONIC FIT. Product family datasheet. Linear / Area Constant Current Non dimmable. Areas of application. Product benefits.
OPTOTRONIC FIT inear / Area Constant Current Non dimmable Areas of application Installation in emergency lighting systems according to IEC 61347-2-3, appendix J Suitable for installation in emergency lighting
More informationHID control gear Electronic. PCIS, PCS outdoor FOX B011 PCI outdoor. Ordering data. Circuit power1. tc/ta for 60,000 h For luminaires with 1 lamp
Product description Pulse packets for increased ignition energy (pulsecontrol technology) Flicker-free light Colour stability thanks to constant power No acoustic resonance Safety shutdown if a lamp is
More informationABB i-bus EIB Universal dimmer 6155 EB for Installation
73-1 - 5975 23459 ABB i-bus EIB Universal dimmer 6155 EB - 101-500 for Installation Operating instructions only for authorized, skilled electricians with EIB training Important instructions Attention It
More informationSubstiTUBE Advanced ST8-HA4
www.osram.com SubstiTUBE Advanced ST8-HA4 Datasheet Innovative LED-lamp, easy and safe to use in CCG installations as direct retrofit. Energy saving potential of up to 60% by replacing 36 W (1.2 m) T8
More information15 Series - Dimmer
Features Master slave system for multiple load dimming Suitable for incandescent and halogen lighting loads (with or without transformer or electronic supply) Compatible with energy saving (CF or ED) dimmable
More informationLED Driver Linear / area fixed output
Driver LC 10W 350mA fixc lp SNC2 ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 350 ma Max. output power 10.2 W Up to 80 % efficiency For
More informationPRODUCT FAMILY DATASHEET QUICKTRONIC MULTIWATT
QUICKTRONIC MULTIWATT ECG for CFL AREAS OF APPLICATION Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100 Public buildings Sports halls and factories Suitable for luminaires of protection class
More informationUser Manual CC DC 24 V 5A. Universal Control Unit UC-1-E. General Information SET. Universal Control Unit UC-1 Of Central Lubrication PAUSE CONTACT
Universal Control Unit UC-1-E User Manual General Information Universal Control Unit UC-1 Of Central Lubrication CC DC 24 V 5A / M 15 SL /MK 31 M Z 30 General Information Contents Universal Control Unit
More informationSY-HDBT-SLIM-100S Extender Set
Installation Guide SY-HDBT-SLIM-100S Extender Set with HDMI, Ethernet, IR, RS232 and Power over 100m of cat6 Cable HDBaseT HDMI Extenders SY Electronics Ltd, Unit 7, Worrall Street, Salford, Greater Manchester,
More informationLED Driver Compact fixed output
Driver LC 40W 900mA fixc C SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 900 ma Max. output power 40 W Nominal life-time up to 50,000
More information(1) (2) (3) Bedienungs- und Montageanleitung. Safety instructions. Structure of the device
3 x cinch/s-video socket Order no. 33 1532 xx USB/3.5 mm audio socket Order no. 33 1539 xx VGA socket Order no. 33 1540 xx VGA socket with screw-in lift terminals Order no. 33 1541 xx High definition socket
More informationOUT. HID control gear Electronic. PCIS, PCI, PCS outdoor DIM B011 PCI outdoor
Product description Pulse packets for increased ignition energy (pulsecotro technology) Flicker-free light Colour stability thanks to constant power o acoustic resonance Safety shutdown if a lamp is faulty
More informationLED Driver Linear / area dimming. Driver LCAI 38/75W TW lp Tunable White
Driver LCAI 38/75W TW lp Tunable White Product description 2-channel LED Driver with LI DT8 Output power: 38 W or 75 W Power input on standby < 0.3 W Nominal life-time up to 50,000 h 5-year guarantee Properties
More informationSY-HDBT-100 Extender Set
Installation Guide SY-HDBT-100 Extender Set with HDMI, IR, RS232 and Ethernet over 100m of cat6 Cable HDBaseT HDMI Extenders SY Electronics Ltd, Unit 7, Worrall Street, Salford, Greater Manchester, M5
More informationTechnical operating data
www.osram.com SubstiTUBE Advanced UO UN ST8AU-1.5m-24W-UN Preliminary Datasheet Innovative LED-lamp, easy and safe to use in CCG and ECG installations as direct retrofit. Energy saving potential of up
More informationPHASED OUT. LED control gear Compact fixed output. Driver LC 40W 900mA fixc C SNC China Domestic ESSENCE series
Product description Fixed output built-in LED Driver Constant current LED Driver Output current 900 ma Max. output power 40 W Nominal life-time up to 30,000 h For luminaires of protection class I and protection
More informationOperating instructions Electronic preset counter Type series 717
Operating instructions Electronic preset counter Type series 717 1. Description 5.98.3_gb 6-digit adding/subtracting counter with two presets Very bright 8mm high LED display Counting and preset range
More informationFor installation queries contact Customer Services (0) TCR IP 4 Operating instructions
For installation queries contact Customer Services +49 - (0)3 69 25-9 00 90 kundenservice@rutenbeck.de TCR IP 4 Operating instructions GB Device overview External buttons (for manual switching) Temperature
More informationLED Driver Compact fixed output
Driver LC 45W 1050mA fixc C SNC ESSENCE series Product description Fixed output built-in LED Driver Constant current LED Driver Output current 1,050 ma output power 45 W Nominal life-time up to 50,000
More informationTechnical operating data
www.osram.com SubstiTUBE Advanced UO UN ST8AU-1.2m-16W-UN Preliminary Datasheet Innovative LED-lamp, easy and safe to use in CCG and ECG installations as direct retrofit. Energy saving potential of up
More informationLevel Measurement silometer FMC 420, FMC 423
Technical Information TI 077F/00/en Level Measurement silometer FMC 420, FMC 423 For connecting to capacitance probes or Deltapilot S hydrostatic probes Main applications The is used for continuous level
More informationRemote Voltage Detector - JET (RVD) Medium and High Voltage kV AC
Remote Voltage Detector JET (RVD) Medium and High Voltage 10 400kV AC Remote Voltage Detector JET (RVD) Medium and High Voltage 10 400kV AC GENERAL CLASSIFICATION PATENT FI 124896 B, 13.03.2015 (Eltel
More informationDimmers SЕRIES. Kitchen light control. Bedroom light control. Living room light control
Kitchen light control Bedroom light control 15 SЕRES iving room light control ighting control in corridors (for hotels, offices and hospitals) FDER reserves the right to alter characteristics at any time
More informationSimply clever! The digital DIN-rail time switches by Grässlin
Simply clever! The digital DIN-rail time switches by Grässlin talento pro Trends and developments on the market. Maximum energy efficiency at low efforts In a saturated fast-moving market, the trend towards
More informationSY-MS121 SY-MS121-AP
Installation Guide SY-MS121 and SY-MS121-AP Presentation Switcher with Multi-Format Inputs and Outputs 4 HDMI, 4 VGA, 1 Component video, 2 Composite video & 1 S-video inputs Simultaneous HDMI, VGA & HDBaseT
More informationSubstiTUBE Value EM Fighter Tube Technical Datasheet
SubstiTUBE Value EM Fighter Tube Technical Datasheet APM LED LAMPS FY17 PRODUCT INTRODUCTION 201701 Product Licensee of trademark OSRAM in general lighting Glass SubstiTUBE Value EM Fighter Tube Innovative
More informationLED Driver Compact dimming
Driver CA 15W 180-350mA flexc PH-C SR ADV ADVACED series Product description Dimmable constant current ED Driver (SEV) Independent ED Driver with cable clamps Selectable output current between 180, 250
More informationOperating instructions Through-beam sensor. OJ51xx laser / / 2010
Operating instructions Through-beam sensor OJ5xx laser 70480 / 00 05 / 200 Contents Preliminary note. Symbols used 2 Safety instructions Functions and features 4 4 Installation 4 5 Electrical connection5
More informationKNX Dimmer RGBW - User Manual
KNX Dimmer RGBW - User Manual Item No.: LC-013-004 1. Product Description With the KNX Dimmer RGBW it is possible to control of RGBW, WW-CW LED or 4 independent channels with integrated KNX BCU. Simple
More informationUSER S Manual NGLT104WPD NGLT150WPD LCD TV / Monitor (IP67 Grade)
USER S Manual NGLT104WPD NGLT150WPD LCD TV / Monitor (IP67 Grade) This Manual is revisable without further notice Contents CONTENTS ------------------------------------------------------------------- 1
More informationUltra thin LED lamp for Pool & Spa OWNER S MANUAL
Ultra thin LED lamp for Pool & Spa OWNER S MANUAL Color Cool white Warm white Blue Your ADAGIO PRO Pool-light is an advanced underwater luminaire with high quality LEDs Table of contents Technical specifications
More informationKRF EMC Filters Installation, Operation and Maintenance Manual
KRF EMC Filters Installation, Operation and Maintenance Manual KRF EMC Filters limit high frequency noise, as well as: Reduce interference Protect sensitive equipment Eliminate drive cross-talk Meet FCC
More informationEC5415B. B-Tronic EasyControl. Assembly and Operating Instructions. Wall/hand-held transmitter, 15-channel, bidirectional
B-Tronic EasyControl EC5415B en Assembly and Operating Instructions Wall/hand-held transmitter, 15-channel, bidirectional Important information for: Fitters / Electricians / Users Please forward accordingly!
More informationCHECK LINE. Model LS-36-LED. Stationary Stroboscope. Operating Manual BY ELECTROMATIC
CHECK LINE BY ELECTROMATIC Stationary Stroboscope Model LS-36-LED Operating Manual Table of Contents 1.0 Introduction... 02 1.1 Unpacking 1.2 Optional Accessories 2.0 Safety Information... 3 3.0 Controls...
More informationSevenlogic Comfort Timer Switch
Operating manual Sevenlogic Comfort Timer Switch RoHS compliant 2011/65/EU General safety instructions...1 Technical data & included with delivery...2 Electrical connection...2 Assembly...3 Setting inching
More informationHDMI Matrix Switch, 4 x 2-Port
HDMI Matrix Switch, 4 x 2-Port MANUAL DS-48300 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting
More informationSceneStyle2 User Guide
SceneStyle2 User Guide Mode Lighting (UK) Limited. The Maltings, 63 High Street, Ware, Hertfordshire, SG12 9AD, UNITED KINGDOM. Telephone: +44 (0) 1920 462121 Facsimile: +44 (0) 1920 466881 e-mail: website:
More informationLED control gear Compact fixed output
Driver LC 40W 900mA fixc SR SNC ESSENCE series Product description Independent fixed output LED Driver Constant current LED Driver Output current 900 ma Max. output power 39 W Nominal life-time up to 50,000
More informationSecto Design Oy Kauppalantie Kauniainen Finland tel fax
Secto Design Oy Kauppalantie 12 02700 Kauniainen Finland tel. +358 9 5050598 fax +358 9 5475 2535 info@sectodesign.fi www.sectodesign.fi Owalo 7000 pendant natural birch, black laminate or white laminate,
More informationR xx-C0900-J074
CEZOS 81-534 Gdynia POLAND, Olgierda 88/b tel. +48 58 664 88 61 cezos@cezos.com www.cezos.com Date: 14.02.2017 Revision 1.1 INTRODUCTION LED module is an advanced light source designed for the best energy
More informationOperating instructions Retro-reflective sensor. OJ50xx laser / / 2010
Operating instructions Retro-reflective sensor OJ50xx laser 70481 / 00 05 / 010 Contents 1 Preliminary note3 1.1 Symbols used 3 Safety instructions 3 4 Installation 4 4.1 Installation of the supplied mounting
More information45 mm : all channels. Output indicator Yellow LED System status indicator Light source Infrared (880 nm) Opening angle +/ 4 Emission angle +/ 5
SPACEGUARD SERIES Description 1-12 metre sensing range 16 to 56 parallel scanning beams Active height of 0 mm to 2520 mm Detector length of 1928 mm to 2648 mm 3 different channel placement models Cable
More informationProduct information. Front-door station series with video for surface-mount
Product information Front-door station series with video for surface-mount series VPES series VPDS 2 05/2006 Table of contents Scope of delivery...3 Safety notices...3 General notes on the cabling in TCS
More informationAspect 2 Circuit Digital Scene Control
Aspect 2 Circuit Digital Scene Control S p e c i f i c a t i o n 2 circuits of trailing edge dimming 500W total between the two circuits Both circuits feature independent overload, short-circuit and open-circuit
More informationHID control gear Electronic
HS HI S,, PCS outdoor DIM chronostep outdoor Product description Pulse packets for increased ignition energy (pulsecotro technology) Flicker-free light Colour stability thanks to constant power o acoustic
More informationDimensions. Model Number. Electrical connection. Features. Pinout Product information. Indicators/operating means. LGS25 Serie.
Q Dimensions Transmitter Detection field + 9. Detection field 7.8 n Beam. Beam Receiver III 0. 0 Fix H H H Fn Model Number Light grid with fixed cable with -pin, M x connector, and fixed cable with 8-pin,
More informationEGM Einthoven Goldberger Module Type 701
Operating Instructions for the PLUGSYS Module EGM Einthoven Goldberger Module Type 701 ECG amplifier for bipolar extremity leads after Einthoven and unipolar extremity leads after Goldberger (Version:
More informationUSER S GUIDE. 1 Description PROGRAMMABLE 3-RELAY LOGIC MODULE
1 Description The is a programmable 3 relay logic module that may be used for multiple applications, including simple timing, door mounted sensor inhibiting and advanced relay sequencing. The contains
More information