Copyright 2014 ZES ZIMMER Electronic Systems GmbH. LMG600 Series Introduction
|
|
- Oswin Townsend
- 6 years ago
- Views:
Transcription
1 LMG600 Series Introduction
2 ZES ZIMMER The Touchstone in Power Analysis Precision in Power is the guideline of. ZES ZIMMER is a German high-tech company specialized in developing, manufacturing and distribution of precision instruments and systems for measuring electrical power, energy, harmonics, flicker and power quality. The company is based in Oberursel, Germany, and was founded in 1980 by Dipl.-Ing. Georg Zimmer. It is one of the technical leaders in the field of power analysis worldwide. ZES ZIMMER offers professional service and support to help customers optimize their applications. 2
3 A New Family of Power Analyzers LMG600 Multi-phase Precision Power Analyzers LMG640 /LMG610 Up to 1000V direct in 10 ranges Up to 32A direct in 14 ranges DC to 10Mhz Innovative DualPath architecture Sampling rate 1.2MS/s Modular 1-4 power channels / Single channel LMG670 Active power accuracy 0.015% rdg % rng One power channel can be substituted with one process-signal-interface modular 3-7 power channels 3
4 LMG600 overview Precision power analyzer Measure View Store and Share 4
5 LMG600 overview Precision power analyzer Measure Capabilities Setup (configuration) Extend (CTs and PTs) 5
6 LMG600 overview Precision power analyzer Measure Capabilities Channels Filters DualPath Setup (configuration) Extend (CTs, PTs and PSI) 6
7 A/B/C-Channels 3 Types for Every Application Power analyzers are available in different accuracy classes, to allow the user to choose the right tool for the job at hand. After all, not all applications require maximum precision; often lower resolution and frequency range are sufficient. This is why the LMG600 series offers three different channel types, which can be combined in the same chassis without problems to ensure that you always have a measuring device tailored to your needs. Accuracy High-precision measurements at high bandwidth Precise measurements on 50Hz applications Cost-effective broadband measurements khz 500 khz 10 MHz Bandwidth 7
8 Power measurement channels 8
9 Channels Right Type for Every Application. Save Money Example: Electric Drive System 2-4 AC DC DC AC M C-channel A/B-channel A/B-channel 1) 2) 3) 1) Input of the converter: C1-channels are usually sufficient for this. 2) DC intermediate circuit: depending on the required level of precision, A1 or B1-channels are required, as the DC intermediate circuit exhibits significant residual ripple under certain circumstances. 3) Converter output: depending on the required level of precision, A1 or B1-channels only are to be used. 9
10 Filters. Accuracy without compromise In this menu the filters and wirings can be set. For several signals, it is necessary to fit filters or change the signal coupling/wiring to get the right values. You can adjust this settings separately for each group. You can select Single Path or Dual Path signal processing 10
11 DualPath Twice the Results, Half the Time Scope display of the voltages at the converter output. The wideband values ( ) show the PWM signal. The narrowband values ( ) are sinusoidal. 11
12 DualPath Twice the Results, Half the Time Simultaneous measurement in two bandwidths DualPath - No compromises, No doubt The LMG670 was the first power analyzer to have two A/D converters in two independent signal paths for each current and voltage channel. One for the filterless measurement of the wideband signal, and a second for the narrowband signal at the output of the anti-aliasing filter. The parallel processing of the digitized sample values gives the user access to both measurements of the same signal, without risking aliasing effects. This unique procedure has established itself for the complete LMG600 series. It avoids all of the downsides of previous approaches and guarantees the most precise result in the shortest time possible. The LMG600 series power analyzers get all necessary values in one shot. Fast. Reliable. No hassle. No compromises. No redundant work. 12
13 LMG600 overview Precision power analyzer Measure Capabilities Setup (configuration) Groups Sync Wiring Extend (CTs and PTs) 13
14 Group menu In this menu the filters and wirings can be set. For several signals, it is necessary to fit filters or change the signal coupling/wiring to get the right values. You can adjust this settings separately for each group. You can select Single Path or Dual Path signal processing 14
15 Channel menu Set up the measuring ranges. Select voltage and/or current input (direct or sensor input) and set up the ranges manually or automatically. 15
16 Measuring: 14 Current Ranges, 5 internal shunts Normal Current Measuring Ranges Direct Input 5 ma 10 ma 20 ma 40 ma 80 ma 150 ma 300 ma 600 ma 1.2 A 2.5 A 5 A 10 A 20 A 32 A 16
17 LMG600 overview Precision power analyzer Measure Capabilities Setup (configuration) Extend CTs PTs Other Signal I/F 17
18 Sensors: Wideband PT, Precision Current Transducers Precision high voltage divider HST for 3/6/9/12/30kV up to 300kHz, 0.05%. Negligible phase error, therefore best suited for wideband power measuring. Up to 20kV and 10kA DC/AC rms with best accuracy. Plug-and-Measure easy pre-configuration. Precise current transducers Prec. AC current transformer Clamp-on current sensor Prec. wideband current transformer Hall effect current sensors 18
19 Rear side interfaces: PSI Process-signal-interface: *occupies 1 slot otherwise available for 1 power measurement channel 8 digital inputs, 8 digital outputs, 2 fast analog inputs (150 ks/s, 15 khz bandwidth), 8 slow analog inputs (DC), 32 analog outputs, 2 frequency inputs (frequency, orientation, position; TTL, HTL or differential) 19
20 Application: Motor & Drive Total System Efficiency Components of the power measurement application with LMG670 1-or 3-phase source Frequency inverter Torque and speed sensory Motor Brake Power analyzer LMG670 20
21 LMG600 overview Precision power analyzer Measure View Stock Screens Custom Screens LMG Remote Store and Share 21
22 Default Screens In this screen all important values of the measured system can be read. Use the touch screen or soft keys to select few or manyvalues as well as the channel/s. Furthermore you can choose between measure values and harmonic analysis via soft key Display 22
23 Voltage and Current Screen In the Currentand Voltagescreen all important values of the current or voltage measurements can be read. You can also select between Normaland Harmonic display. 23
24 Power Screen In the Power screen all important values of the power measurements can be read. You can also select between Normaland Harmonicdisplay as well as many values 24
25 Energy Screen In the Energy screen all important values of the energy measurements can be read. Start, Stop and/or Reset your energy measurement. All channels can be started and stopped independently from each other. 25
26 Graph screens: Plot, Scope, Harmonics, Vector Up to 8 tracks can be graphically represented in one scope. In DualPathmode you can track narrow-and wideband signals simultaneously. Cursors can be used to obtain values at and between cursors. In Plottab you can plot measuring values. 26
27 LMG600 overview Precision power analyzer Measure View Stock Screens Custom Screens LMG Remote Store and Share 27
28 Customize a Screen Enter CUSTOM menu Pre-defined views for introduction and measuring examples. Use the first two views Introduction 1/2 and Introduction 2/2 to get a first impression. There are two basic editors: Tap shortto enter the content editor: show the grid, create boxes and add content Tap longto enter the layout editor: modify the layout, move/remove and/or resize boxes 28
29 Customize a Screen Enter View 6 Use the empty view to customize your own menu. First you will see soft keys to clear/load/save menus and/or to set the grid/background Now we want to build a custom menu step by step to display the power and efficiency of a variable frequency drive. First, enter the settings as marked to set the grid dimensions. 29
30 Customize a Screen Settings Set the grid dimensions as required. This can be specified by the required solution for the layout or the required number of parameters etc. Enter 12 rows and 24 columns. You will see the grid dimension inthe preview. 30
31 Customize a Screen Rename Give your own menu a name by pressing the soft key Rename. Enter a name for your custom menu. 31
32 Customize a Screen Set the title Enter the content editor to see the grid. Tap longer on the marked box to enter the layout editor. The box will be framed in red. Tap and hold one corner of the red framed box to resize it. Resize it as shown in the left lower screenshot. 32
33 Customize a Screen Set the title for the menu Leave the layout editor and to re-enter the content editor. Mark the resized box and press the soft key Add Textas marked in the screenshot. *A text in the custom menu can consist of standard html-notations. 33
34 Customize a Screen Complete the custom menu Add all the remaining graphs and subtitles as shown in the screenshot to your custom menu. To add graphs repeat the procedure as for adding measurands but select Add Graph instead in the content menu. In the content editor the scope source can be selected as well. The signals shown in the graphs need to be set in the GRAPH menu first. 34
35 LMG600 overview Precision power analyzer Measure View Stock Screens Custom Screens LMG Remote Store and Share 35
36 LMG Remote Benefits Control the LMG670 remotely from a Windows PC LMG Remote mimics the power analyzer itself down to the last detail Familiar operation of the measuring device from the PC Real-time display of all device functions Measuring device LMG670 Software on Windows PC 36
37 LMG Remote Storage menu stead of storing the measurement data (.zlr-file,.csv-file) on the device integrated HDD, LMG Remote allows the customer to store the files directly on the HDD of your Windows PC. 37
38 LMG Remote Interface settings on LMG670 Easy setup of the interface settings Set address masks as given from your administrator or select "DHCP on 38
39 LMG Remote Connection with LMG Remote Just type the IP-address of the measuring device and press Enter. Afterwards, you can start with your remote configuration and measurement. 39
40 LMG600 overview Precision power analyzer Measure View Store and Share Logging Networks Script Editor 40
41 LMG600 Data Storage - Create ZLR-file nter the Storage -menu and click enter File in the Log -card 41
42 LMG600 Data Storage - Create ZLR-file elect the storage location for the.zlr-file. Name the file and press Enter to get back to the Storage menu. 42
43 LMG600 Data Storage - Create ZLR-file ress Configure Values to select the single measurement values you want to store. You can also select the range in list-values like harmonics e.g. Press enter to get back in the menu. 43
44 LMG600 Data Storage - Create ZLR-file Press Create to start/stop continuous storage (one row per cycle) or press Once for single shots. 44
45 LMG600 Data Storage - Export CSV-file Press Export to enter the Export menu. You can add some or all stored valuesfor export. 45
46 LMG600 Data Storage - Export CSV-file ou can split the output file by file size or by the number of rows in each file etc. ress Enter for selecting the storage location. 46
47 LMG600 Data Storage - Export CSV-file Name the.csv-file and press Enter. Now you have exported your stored measurement data. 47
48 LMG600 overview Precision power analyzer Store and Share Logging Networks Gbit Ethernet USB storage Serial RS232 CAN Script Editor 48
49 LMG600 overview Precision power analyzer Measure View Store and Share Logging Networks Script Editor 49
50 Script Editor Powerful programming script environment for application computing on board. Full access to system information Create variables and equations for I/O control, Pass/Fail, reporting etc. 50
51 LMG600 overview Precision power analyzer Measure View Store and Share Harmonic and Flicker Compliance Testing 51
52 LMG600 with LMG Test Suite Measurement assembly according to EN with LMG670 G ~ A G ~ A G ~ A EUT V V V AC source grid impedance NI power analyzer LMG670 device under test 52
53 LMG600 with LMG Test Suite CE-Compliance The use of power electronics devices causes power or rather current depending noise on the grid or your network, which reduces the quality of your gridvoltage or interferes other connected devices. Therefore, electrical installations, systems and equipment must comply with the EU directives and regulations, when they are placed on the market within the EU. Other guidelines for electromagnetic compatibility and eco-design of energy-using products must be observed and fulfilled as well. 53
54 LMG600 with LMG Test Suite LMG Test Suite Only 4 steps for complete compliance test including result Setup File Test Report 54
55 LMG600 Series Key Features Harmonics Process Signals Custom menu Script Editor Flexible Filters Plug n Measure Synchronization With Interharmonics up to 400th order according EN Torque/speed inputs fast & synchronous to rms power values Customize your own menu according your demands Convenient calculation of all derived variables Freely configurable in frequency, type and characteristics Adding sensors fast & conveniently while avoiding mistakes Up to 4 respectively 7 frequencies concurrently 55
56 LMG600 Series Key Features Flicker Sample Values Touchscreen Remote Control Memory Interfaces Interactions between grid and consumers acc. to EN Hi-res sample values via interface Large 1024x600 display; rapid access to all important menu items Real-time display of all device functions via remote operation Internal storage even of long-term measurements Connectivity with GBit-Ethernet, USB2.0, RS-232 and DVI/VGA 56
57 Thank you for your attention! Questions? Robert Emerson ZES ZIMMER Inc. Sales and Application
MICROMASTER Encoder Module
MICROMASTER Encoder Module Operating Instructions Issue 01/02 User Documentation Foreword Issue 01/02 1 Foreword Qualified Personnel For the purpose of this Instruction Manual and product labels, a Qualified
More informationR&S SMBV-Z1 Reference Frequency Converter Specifications
Test & Measurement Data Sheet 01.01 R&S SMBV-Z1 Reference Frequency Converter Specifications Version 01.01, July 2011 CONTENTS Definitions... 3 Introduction... 4 Specifications... 4 Input signal...4 Output
More information2 MHz Lock-In Amplifier
2 MHz Lock-In Amplifier SR865 2 MHz dual phase lock-in amplifier SR865 2 MHz Lock-In Amplifier 1 mhz to 2 MHz frequency range Dual reference mode Low-noise current and voltage inputs Touchscreen data display
More information4 MHz Lock-In Amplifier
4 MHz Lock-In Amplifier SR865A 4 MHz dual phase lock-in amplifier SR865A 4 MHz Lock-In Amplifier 1 mhz to 4 MHz frequency range Low-noise current and voltage inputs Touchscreen data display - large numeric
More informationVersatile EMS and EMI measurements for the automobile sector
EMC/FIELD STRENGTH EMC Measurement Software R&S EMC32-A Versatile EMS and EMI measurements for the automobile sector EMC Measurement Software R&S EMC32-A (automotive) from Rohde & Schwarz is a powerful
More informationEMS DATA ACQUISITION AND MANAGEMENT (LVDAM-EMS) MODEL 9062-C
A Electric Power / Controls 2 kw EMS DATA ACQUISITION AND MANAGEMENT (LVDAM-EMS) MODEL 9062-C GENERAL DESCRIPTION The Lab-Volt Data Acquisition and Management for Electromechanical Systems (LVDAM-EMS),
More informationEnsemble QLAB. Stand-Alone, 1-4 Axes Piezo Motion Controller. Control 1 to 4 axes of piezo nanopositioning stages in open- or closed-loop operation
Ensemble QLAB Motion Controllers Ensemble QLAB Stand-Alone, 1-4 Axes Piezo Motion Controller Control 1 to 4 axes of piezo nanopositioning stages in open- or closed-loop operation Configurable open-loop
More informationElectronic Panel Meters DIGEM Preference Program Process control, automation & laboratory uses Class 0.01 to 1 Current, Voltage, Frequency,
Electronic Panel Meters DIGEM Preference Program Process control, automation & laboratory uses Class 0.01 to 1 Current, Voltage, Frequency, Temperature, RPM, Pressure, etc. LED/ LCD displays 1999 to 99999
More informationIndustriefunkuhren. Technical Manual. OEM Sync-Module FE1000 (IRIG-B) ENGLISH
Industriefunkuhren Technical Manual OEM Sync-Module FE1000 (IRIG-B) ENGLISH Version: 07.02-24.03.2014 2 / 19 FE1000 IRIG-B Synchronisation - V07.02 IMPORTANT NOTES Version Number (Firmware / Manual) THE
More informationNew Generation of MEA-Systems: MEA2100-System
New Generation of MEA-Systems: MEA2100-System Integrated stimulation Gain and bandwidth adjustable via software Up to 240 recording channels Variable contact unit for microelectrode arrays with 32, 60
More informationFCPM-6000RC. Mini-Circuits P.O. Box , Brooklyn, NY (718)
USB / Ethernet Integrated Frequency Counter & Power Meter 50Ω -30 dbm to +20 dbm, 1 MHz to 6000 MHz The Big Deal Automatically synchronized power & frequency measurements USB and Ethernet control Includes
More informationSC26 Magnetic Field Cancelling System
SPICER CONSULTING SYSTEM SC26 SC26 Magnetic Field Cancelling System Makes the ambient magnetic field OK for electron beam tools in 300 mm wafer fabs Real time, wideband cancelling from DC to > 9 khz fields
More informationInstallation & Operational Manual
Radiant Communications Corporation 5001 Hadley Road South Plainfield NJ 07080 Tel (908) 757-7444 Fax (908) 757-8666 WWW.RCCFIBER.COM QRF5000M MDU ENCODER Installation & Operational Manual Rev.A2 1. Introduction
More informationEDL8 Race Dash Manual Engine Management Systems
Engine Management Systems EDL8 Race Dash Manual Engine Management Systems Page 1 EDL8 Race Dash Page 2 EMS Computers Pty Ltd Unit 9 / 171 Power St Glendenning NSW, 2761 Australia Phone.: +612 9675 1414
More informationMajor Differences Between the DT9847 Series Modules
DT9847 Series Dynamic Signal Analyzer for USB With Low THD and Wide Dynamic Range The DT9847 Series are high-accuracy, dynamic signal acquisition modules designed for sound and vibration applications.
More informationHOBO H Energy Logger
HOBO H22-001 Energy Logger Logs AC Current Temperature Relative Humidity DC Voltage 4-20 ma AC Voltage Carbon Dioxide DC Current Kilowatt Hours Killowatts The HOBO Energy Logger is a modular, reconfigurable
More informationG4500. Portable Power Quality Analyser. Energy Efficiency through power quality
G4500 Portable Power Quality Analyser Energy Efficiency through power quality The BlackBox portable series power quality analyser takes power quality monitoring to a whole new level by using the revolutionary
More informationSynthesized Block Up- and Downconverter Indoor / Outdoor
Visit us at www.work-microwave.de Synthesized Block Up- and Downconverter Single / Dual / Triple Band Single / Dual Channel S-, C-, Ku-, K (DBS)-, Ka- and Q-band WORK Microwave s synthesized block converters
More informationSIDC-5004 VHF/UHF WIDEBAND TUNER/CONVERTER. FREQUENCY RANGE: 20 to 3000 MHz
SIDC-5004 VHF/UHF WIDEBAND TUNER/CONVERTER FREQUENCY RANGE: 20 to 3000 MHz High Dynamic Range Enables the End User to Reject Blocking Signals Often Undetected by Less Sensitive Tuners High Dynamic Range
More informationPQ-Box 100 Quick Start Instructions
PQ-Box 100 Quick Start Instructions These instructions are provided for the purpose on providing a quick start to PQ-Box 100 installation and operation. Please refer to the user handbook for full details.
More informationMSO-28 Oscilloscope, Logic Analyzer, Spectrum Analyzer
Link Instruments Innovative Test & Measurement solutions since 1986 Store Support Oscilloscopes Logic Analyzers Pattern Generators Accessories MSO-28 Oscilloscope, Logic Analyzer, Spectrum Analyzer $ The
More informationDT9857E. Key Features: Dynamic Signal Analyzer for Sound and Vibration Analysis Expandable to 64 Channels
DT9857E Dynamic Signal Analyzer for Sound and Vibration Analysis Expandable to 64 Channels The DT9857E is a high accuracy dynamic signal acquisition module for noise, vibration, and acoustic measurements
More informationDA E: Series of Narrowband or Wideband Distribution Amplifiers
DA1-150-10-E: Series of Narrowband or Wideband Distribution Amplifiers Key Features Dual A and B inputs. Automatic or manual switchover, configured by the Ethernet port. 1-150 MHz wideband operation. Other
More informationDIGITAL INSTRUMENTS S.R.L. SPM-ETH (Synchro Phasor Meter over ETH)
DIGITAL INSTRUMENTS S.R.L. SPM-ETH (Synchro Phasor Meter over ETH) SPM-ETH (Synchro Phasor Meter over ETH) Digital Instruments 1 ver the years, an awareness of the criticality of the Power Grid and Orelated
More informationLAUREL ELECTRONICS, INC.
LAUREL ELECTRONICS, INC. Laureate Digital Panel Meter for Process, Strain & Potentiometer Follower Signals Features Selectable ±0.2, ±2, ±20, ±200, ±300 & ±600 Vdc voltage ranges Selectable ±2, ±20, ±200
More informationFluke 190-Series II Firmware Upgrade V11.44
Fluke 190-Series II Firmware Upgrade V11.44 Requirements 1. Fluke 190- Series II ScopeMeter with firmware prior to V11.44 2. Supported models are: 190-102, 190-104, 190-062, 190-202, 190-204, 190-502,
More information2 MHz Lock-In Amplifier
2 MHz Lock-In Amplifier SR865 2 MHz dual phase lock-in amplifier SR865 2 MHz Lock-In Amplifier 1 mhz to 2 MHz frequency range Low-noise current and voltage inputs Touchscreen data display - large numeric
More informationDPD80 Visible Datasheet
Data Sheet v1.3 Datasheet Resolved Inc. www.resolvedinstruments.com info@resolvedinstruments.com 217 Resolved Inc. All rights reserved. General Description The DPD8 is a low noise digital photodetector
More informationManual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.
Manual Title: Supplement Issue: 7 CD Part Number: 4822 872 3093x Issue Date: 1/19 Print Date: January 2012 Page Count: 9 Revision/Date: 1, 6/12 This supplement contains information necessary to ensure
More informationModel 7330 Signal Source Analyzer Dedicated Phase Noise Test System V1.02
Model 7330 Signal Source Analyzer Dedicated Phase Noise Test System V1.02 A fully integrated high-performance cross-correlation signal source analyzer from 5 MHz to 33+ GHz Key Features Complete broadband
More informationLAUREL. Laureate Digital Panel Meter for Load Cell & Microvolt Input ELECTRONICS, INC. Features. Description
Description LAUREL ELECTRONICS, INC. Features Laureate Digital Panel Meter for Load Cell & Microvolt Input 20, 50, 100, 250 & 500 mv ranges Span adjust from 0 to ±99,999, zero adjust from -99,999 to +99,999
More informationSingle cable multiswich programmer PC102W
Single cable multiswich programmer PC102W 1. Product description The PC102W - single cable multiswich programmer (in the text - programmer) is useful instrument while configuring and troubleshooting SAT
More informationIP LIVE PRODUCTION UNIT NXL-IP55
IP LIVE PRODUCTION UNIT NXL-IP55 OPERATION MANUAL 1st Edition (Revised 2) [English] Table of Contents Overview...3 Features... 3 Transmittable Signals... 3 Supported Networks... 3 System Configuration
More informationPRELIMINARY INFORMATION. Professional Signal Generation and Monitoring Options for RIFEforLIFE Research Equipment
Integrated Component Options Professional Signal Generation and Monitoring Options for RIFEforLIFE Research Equipment PRELIMINARY INFORMATION SquareGENpro is the latest and most versatile of the frequency
More informationNoise Detector ND-1 Operating Manual
Noise Detector ND-1 Operating Manual SPECTRADYNAMICS, INC 1849 Cherry St. Unit 2 Louisville, CO 80027 Phone: (303) 665-1852 Fax: (303) 604-6088 Table of Contents ND-1 Description...... 3 Safety and Preparation
More informationDPD80 Infrared Datasheet
Data Sheet v1.4 DPD8 Infrared DPD8 Infrared Datasheet Resolved Inc. www.resolvedinstruments.com info@resolvedinstruments.com 217 Resolved Inc. All rights reserved. DPD8 Infrared General Description The
More informationimso-104 Manual Revised July 19, 2012
imso-104 Manual Section 1 Getting Started SAFETY 1.10 Quickstart Guide 1.20 SAFETY 1.30 Compatibility 1.31 Hardware 1.32 Software Section 2 How it works 2.10 Menus 2.20 Analog Channel 2.21 On / Off 2.22
More informationAnalog Discovery Scope and Waveform Generator Edited 11/15/2016 by Eric Scotti & DGH
Analog Discovery Scope and Waveform Generator Edited 11/15/2016 by Eric Scotti & DGH Specifications The Analog Discovery contains several devices but we will likely only use the 2 channel oscilloscope
More informationExperiment 13 Sampling and reconstruction
Experiment 13 Sampling and reconstruction Preliminary discussion So far, the experiments in this manual have concentrated on communications systems that transmit analog signals. However, digital transmission
More informationRSSL1:1-KuXER. Outdoor Unit (ODU) Ku Ext Ref LNB Redundancy System with external 10 MHz Reference System. Mux/Tee. Coax cable
RSSL1:1-KuXER Ku Ext Ref LNB Redundancy System with external 10 MHz Reference System Outdoor Unit (ODU) Waveguide Switch & Status LNB 1 Coax cable Interface Terminal LNB 2 Indoor Unit Outdoor Unit Indoor
More informationDT9834 Series High-Performance Multifunction USB Data Acquisition Modules
DT9834 Series High-Performance Multifunction USB Data Acquisition Modules DT9834 Series High Performance, Multifunction USB DAQ Key Features: Simultaneous subsystem operation on up to 32 analog input channels,
More information7000 Series Signal Source Analyzer & Dedicated Phase Noise Test System
7000 Series Signal Source Analyzer & Dedicated Phase Noise Test System A fully integrated high-performance cross-correlation signal source analyzer with platforms from 5MHz to 7GHz, 26GHz, and 40GHz Key
More informationDIVERSITY DVB-T RECEIVER (DDR)
User s Manual The most important thing we build is trust. DIVERSITY DVB-T RECEIVER (DDR) Cobham Surveillance GMS Products 1916 Palomar Oaks Way Ste 100 Carlsbad, CA 92008 100-M0062X2 T: 760-496-0055 05/15/09
More informationChoosing an Oscilloscope
Choosing an Oscilloscope By Alan Lowne CEO Saelig Company (www.saelig.com) Post comments on this article at www.nutsvolts.com/ magazine/article/october2016_choosing-oscilloscopes. All sorts of questions
More informationR&S ZVA110 Vector Network Analyzer Specifications
ZVA110_dat-sw_en_5214-4813-22_cover.indd 1 Data Sheet 04.00 Test & Measurement R&S ZVA110 Vector Network Analyzer Specifications 15.11.2013 14:42:28 CONTENTS Definitions... 3 Specifications... 4 Overview...
More informationCI-218 / CI-303 / CI430
CI-218 / CI-303 / CI430 Network Camera User Manual English AREC Inc. All Rights Reserved 2017. l www.arec.com All information contained in this document is Proprietary Table of Contents 1. Overview 1.1
More informationSignal Conditioners. Highlights. Battery powered. Line powered. Multi-purpose. Modular-style. Multi-channel. Charge & impedance converters
Signal Conditioners Highlights Battery powered Line powered Multi-purpose Modular-style Multi-channel Charge & impedance converters Industrial charge amplifiers & sensor simulators PCB Piezotronics, Inc.
More informationimso-104 Manual Revised August 5, 2011
imso-104 Manual Revised August 5, 2011 Section 1 Getting Started SAFETY 1.10 Quickstart Guide 1.20 SAFETY 1.30 Compatibility 1.31 Hardware 1.32 Software Section 2 How it works 2.10 Menus 2.20 Analog Channel
More informationinnovative technology to keep you a step ahead Tailored to Simplify Installation and Troubleshooting of RF Signals
Tailored to Simplify Installation and Troubleshooting of RF Signals Intuitive Color Display with Simple Pass/ Fail Indicators Reduce Installer Entry Errors and Improves Decision Making Autotests Streamline
More informationSynthesized Block Up- and Downconverter
Visit us at www.w ork-microw ave.de Synthesized Block Up- and Downconverter S, C, X, Ku, K, The satellite up- and downconverters developed and manufactured by WORK Microwave are designed to meet the requirements
More informationUser Manual MODEL: KK1500-TR. Touch Display LCD Monitor. Installation Guide. 15 Resistive Touch LCD Monitor
Touch Display LCD Monitor User Manual Installation Guide 15 Resistive Touch LCD Monitor MODEL: KK1500-TR i-tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@itechlcd.com WEB: www.itechlcd.com User
More informationJ6 User Manual. User Manual. Multi-Screen Splicing Processor J6. Xi an NovaStar Tech Co., Ltd. Rev1.0.1 NS
J6 User Manual User Manual Multi-Screen Splicing Processor J6 Rev1.0.1 NS160110162 Statement Dear users, You are welcome to use the J6, a multi-screen splicing processor of Xi'an NovaStar Tech Co., Ltd.
More informationWe bring quality to light. SNT 10 DC Power Supply
We bring quality to light. SNT 10 DC Power Supply State-of-the-art choice for a reliable, high power DC supply The SNT 10 DC Power Supply is a precision tool developed to meet the needs of the automotive
More informationME EN 363 ELEMENTARY INSTRUMENTATION Lab: Basic Lab Instruments and Data Acquisition
ME EN 363 ELEMENTARY INSTRUMENTATION Lab: Basic Lab Instruments and Data Acquisition INTRODUCTION Many sensors produce continuous voltage signals. In this lab, you will learn about some common methods
More informationR&S ZN-Z103 Calibration Unit Specifications. Data Sheet V02.01
R&S ZN-Z103 Calibration Unit Specifications Data Sheet V02.01 CONTENTS Definitions... 3 Measurement range... 5 Effective system data... 5 General data... 6 Ordering information... 7 2 Rohde & Schwarz R&S
More informationDigital Storage Oscilloscopes 2550 Series
Data Sheet Digital Storage Oscilloscopes 2550 Series The 2550 series digital storage oscilloscopes provide high performance and value in 2-channel and 4-channel configurations. With bandwidth from 70 MHz
More informationIt will cause malfunction if the monitor is operating with unspecified power supply
User Manual / Installation Guide Model No. PTM-1525R/RT Warning! It will cause malfunction if the monitor is operating with unspecified power supply unit or incorrect power voltage. Do not exposure this
More informationCHAPTER 3 SEPARATION OF CONDUCTED EMI
54 CHAPTER 3 SEPARATION OF CONDUCTED EMI The basic principle of noise separator is described in this chapter. The construction of the hardware and its actual performance are reported. This chapter proposes
More informationFS3. Quick Start Guide. Overview. FS3 Control
FS3 Quick Start Guide Overview The new FS3 combines AJA's industry-proven frame synchronization with high-quality 4K up-conversion technology to seamlessly integrate SD and HD signals into 4K workflows.
More informationUser Guide UD51. Second encoder small option module for Unidrive. Part Number: Issue Number: 5.
EF User Guide UD51 Second encoder small option module for Unidrive Part Number: 0460-0084-05 Issue Number: 5 www.controltechniques.com Safety Information The option card and its associated drive are intended
More informationMultiband Noise Reduction Component for PurePath Studio Portable Audio Devices
Multiband Noise Reduction Component for PurePath Studio Portable Audio Devices Audio Converters ABSTRACT This application note describes the features, operating procedures and control capabilities of a
More informationR&S HF907DC SHF Downconverter Specifications
Radiomonitoring & Radiolocation Data Sheet 01.03 R&S HF907DC SHF Downconverter Specifications CONTENTS Definitions... 3 Specifications... 4 Frequency conversion... 4 Input and output properties... 4 Rechargeable
More informationSIDC-6003 MICROWAVE WIDEBAND DOWNCONVERTER / TUNER UP TO
SIDC-6003 MICROWAVE WIDEBAND DOWNCONVERTER / TUNER UP TO 26.5 GHz WIDE FREQUENCY RANGE: 0.5-26.5 GHz FEATURES High Dynamic Range Fast Switching Synthesizer with 10 Hz Tuning Resolution Excellent Phase
More informationLED control gear Compact dimming. Uconverter LCAI 2x38 W 0500 K013 one4all ECO series. Ordering data
Product description Dimmable built-in for LED Constant current (with 2 adjustable output channels) Designed for outdoor and street luminaire Output power 2 x 38 W Suitable for mains voltage peaks (burst/surge)
More informationGetting Started with the LabVIEW Sound and Vibration Toolkit
1 Getting Started with the LabVIEW Sound and Vibration Toolkit This tutorial is designed to introduce you to some of the sound and vibration analysis capabilities in the industry-leading software tool
More informationDigital Lock-In Amplifiers SR850 DSP lock-in amplifier with graphical display
Digital Lock-In Amplifiers SR850 DSP lock-in amplifier with graphical display SR850 DSP Lock-In Amplifier 1 mhz to 102.4 khz frequency range >100 db dynamic reserve 0.001 degree phase resolution Time constants
More informationSIDC-5009 Series VHF/UHF WIDEBAND TUNER/CONVERTER. FREQUENCY RANGE: 20 to 3000 MHz
SIDC-5009 Series VHF/UHF WIDEBAND TUNER/CONVERTER FREQUENCY RANGE: 20 to 3000 MHz High Dynamic Range Enables the End User to Reject Blocking Signals Often Undetected by Less Sensitive Tuners High Dynamic
More informationENGINEERING COMMITTEE
ENGINEERING COMMITTEE Interface Practices Subcommittee SCTE STANDARD SCTE 45 2017 Test Method for Group Delay NOTICE The Society of Cable Telecommunications Engineers (SCTE) Standards and Operational Practices
More informationHAL Series. Versatile range of production line testers.
HAL Series Versatile range of production line testers. The HAL comprehensive safety testers offer outstanding levels of flexibility and functionality to dramatically improve the quality and productivity
More informationCDMA2000 1xRTT / 1xEV-DO Measurement of time relationship between CDMA RF signal and PP2S clock
Products: CMU200 CDMA2000 1xRTT / 1xEV-DO Measurement of time relationship between CDMA RF signal and PP2S clock This application explains the setup and procedure to measure the exact time relationship
More informationSHENZHEN H&Y TECHNOLOGY CO., LTD
Chapter I Model801, Model802 Functions and Features 1. Completely Compatible with the Seventh Generation Control System The eighth generation is developed based on the seventh. Compared with the seventh,
More informationE X P E R I M E N T 1
E X P E R I M E N T 1 Getting to Know Data Studio Produced by the Physics Staff at Collin College Copyright Collin College Physics Department. All Rights Reserved. University Physics, Exp 1: Getting to
More informationSingMai Electronics SM06. Advanced Composite Video Interface: DVI/HD-SDI to acvi converter module. User Manual. Revision th December 2016
SM06 Advanced Composite Video Interface: DVI/HD-SDI to acvi converter module User Manual Revision 0.3 30 th December 2016 Page 1 of 23 Revision History Date Revisions Version 17-07-2016 First Draft. 0.1
More informationDMC550 Technical Reference
DMC550 Technical Reference 2002 DSP Development Systems DMC550 Technical Reference 504815-0001 Rev. B September 2002 SPECTRUM DIGITAL, INC. 12502 Exchange Drive, Suite 440 Stafford, TX. 77477 Tel: 281.494.4505
More informationAgilent E5500 Series Phase Noise Measurement Solutions Product Overview
Agilent E5500 Series Phase Noise Measurement Solutions Product Overview E5501A/B E5502A/B E5503A/B E5504A/B 50 khz to 1.6 GHz 50 khz to 6 GHz 50 khz to 18 GHz 50 khz to 26.5 GHz The Agilent E5500 series
More informationDA : Series of Narrowband or Wideband Distribution Amplifiers
DA1-100-10: Series of Narrowband or Wideband Distribution Amplifiers Key Features 1-100 MHz wideband Operation. Other band frequencies from 100 khz to 200 MHz are available AGC Level Controlled. Output
More informationDigital Delay / Pulse Generator DG535 Digital delay and pulse generator (4-channel)
Digital Delay / Pulse Generator Digital delay and pulse generator (4-channel) Digital Delay/Pulse Generator Four independent delay channels Two fully defined pulse channels 5 ps delay resolution 50 ps
More informationNational Park Service Photo. Utah 400 Series 1. Digital Routing Switcher.
National Park Service Photo Utah 400 Series 1 Digital Routing Switcher Utah Scientific has been involved in the design and manufacture of routing switchers for audio and video signals for over thirty years.
More informationIP LIVE PRODUCTION UNIT NXL-IP55 USO RESTRITO. OPERATION MANUAL 1st Edition (Revised 2) [English]
IP LIVE PRODUCTIO UIT XL-IP55 USO RESTRITO OPERATIO MAUAL 1st Edition (Revised 2) [English] Table of Contents Overview... 3 Features... 3 Transmittable Signals... 3 Supported etworks... 3 System Configuration
More informationDac3 White Paper. These Dac3 goals where to be achieved through the application and use of optimum solutions for:
Dac3 White Paper Design Goal The design goal for the Dac3 was to set a new standard for digital audio playback components through the application of technical advances in Digital to Analog Conversion devices
More informationUser Manual MODEL: KKF1500-PCAP. True FLAT P-CAP LCD Monitor. Installation Guide. 15 True FLAT P-CAP Touch LCD Monitor
True FLAT P-CAP LCD Monitor User Manual Installation Guide 15 True FLAT P-CAP Touch LCD Monitor MODEL: KKF1500-PCAP i-tech Company LLC TOLL FREE: (888) 483-2418 EMAIL: info@itechlcd.com WEB: www.itechlcd.com
More informationSIDC-6005 MICROWAVE WIDEBAND DOWNCONVERTER / TUNER UP TO
SIDC-6005 MICROWAVE WIDEBAND DOWNCONVERTER / TUNER UP TO 18 GHz WIDE FREQUENCY RANGE: 0.5-18 GHz FEATURES High Dynamic Range Fast Switching Synthesizer with 10 Hz Tuning Resolution Excellent Phase Noise
More informationMIE 402: WORKSHOP ON DATA ACQUISITION AND SIGNAL PROCESSING Spring 2003
MIE 402: WORKSHOP ON DATA ACQUISITION AND SIGNAL PROCESSING Spring 2003 OBJECTIVE To become familiar with state-of-the-art digital data acquisition hardware and software. To explore common data acquisition
More informationPart No. ENC-LAB01 Users Manual Introduction EncoderLAB
PCA Incremental Encoder Laboratory For Testing and Simulating Incremental Encoder signals Part No. ENC-LAB01 Users Manual The Encoder Laboratory combines into the one housing and updates two separate encoder
More informationModular Block Converter Systems
Modular Block Converter Systems The Modular Block Converter System eliminates system downtime and maximizes ease of repair by providing fully modular systems for up conversion or down conversion. Critical
More informationDVI KVM Extender DVIVision 7.4
DVIVision KVM Extender Extender systems to bridge IT-distances Leading the way in digital KVM The company Leading the way in digital KVM Guntermann & Drunck is regarded as a leading manufacturer of digital
More informationPre-processing of revolution speed data in ArtemiS SUITE 1
03/18 in ArtemiS SUITE 1 Introduction 1 TTL logic 2 Sources of error in pulse data acquisition 3 Processing of trigger signals 5 Revolution speed acquisition with complex pulse patterns 7 Introduction
More informationMULTIMIX 8/4 DIGITAL AUDIO-PROCESSING
MULTIMIX 8/4 DIGITAL AUDIO-PROCESSING Designed and Manufactured by ITEC Tontechnik und Industrieelektronik GesmbH 8200 Laßnitzthal 300 Austria / Europe MULTIMIX 8/4 DIGITAL Aim The most important aim of
More informationPT-TX400 S P E C F I L E. LCD Projectors. As of December Specifications and appearance are subject to change without notice.
S P E C F I L E Product Number : Product Name : LCD Projectors As of December 2015. Specifications and appearance are subject to change without notice. 18 Specifications Main unit Power supply Power consumption
More informationHD-CM HORIZON DIGITAL CABLE METER
HD-CM OFF! Max RF i/p = +17dBm 75Ω Max AC/DC i/p = 120Vrms MENU INPUT ON HORIZON DIGITAL CABLE METER Horizon Global Electronics Ltd. Unit 3, West Side Flex Meadow Harlow, Essex CM19 5SR Phone: +44(0) 1279
More informationManual FERROFISH A16 MK-II. advanced audio applications. professional 16 channel AD/DA converter
Manual A16 MK-II professional 16 channel AD/DA converter FERROFISH advanced audio applications Ferrofish GmbH Version 1.1 Introduction Introduction Thank you very much for choosing to purchase this product.
More informationAgilent Technologies 54522A
Agilent Technologies 54522A Data Sheet Product Specifications General Specifications Maximum Sample Rate 54522A 2 GSa/s Number of Channels (all are simultaneous acquisition) 54522A: 2 Record Length 32,768
More informationR&S TS-PMB Switch Matrix Module High-density, 90-channel, full matrix relay multiplexer module
TS-PMB_bro_en_0758-0600-12.indd 1 Product Brochure 02.00 Test & Measurement Switch Matrix Module High-density, 90-channel, full matrix relay multiplexer module Switch Matrix Module At a glance Typical
More informationVideo Extender DS128 DSRXL. Instruction Manual. 8-Port Cat5 VGA Digital Signage Broadcaster with RS232 and Audio
DS128 DSRXL Instruction Manual Video Extender 8-Port Cat5 VGA Digital Signage Broadcaster with RS232 and Audio Cat5 VGA Digital Signage Receiver with RS232 and Audio FCC Compliance Statement This equipment
More informationNOTICE: This document is for use only at UNSW. No copies can be made of this document without the permission of the authors.
Brüel & Kjær Pulse Primer University of New South Wales School of Mechanical and Manufacturing Engineering September 2005 Prepared by Michael Skeen and Geoff Lucas NOTICE: This document is for use only
More informationDA MHz Series of Narrowband or Wideband Distribution Amplifiers
DA1-100-10-10MHz Series of Narrowband or Wideband Distribution Amplifiers Key Features 1-10 MHz wideband Operation. Other band frequencies from 100 khz to 200 MHz are available AGC Level Controlled. Output
More informationPicoScope 3000 Series Automotive User guide
PicoScope 3000 Series Automotive User guide PS3000A044 v1.0 I PicoScope 3000 Series Automotive PC Oscilloscopes Table of Contents 1 Introduction...2...2 1 Overview...2 2 Minimum PC requirements...2 3 Installation
More informationARCHITECTURAL AND ENGINEERING SPECIFICATION DIVISION - LEVEL 1 28 ELECTRONIC SAFETY AND SECURITY LEVEL ELECTRONIC SURVEILLANCE LEVEL
Eventys EX 4 CRDN0410-PA Network Video Recorder (NVR) ARCHITECTURAL AND ENGINEERING SPECIFICATION DIVISION - LEVEL 1 28 ELECTRONIC SAFETY AND SECURITY LEVEL 2 28 20 00 ELECTRONIC SURVEILLANCE LEVEL 3 28
More informationGamma instabus. Technical product information
Gamma instabus Technical product information Universal dimmer N 554D31, 4 x 300 VA / 1x 1000 VA, AC 230 V Universal dimmer N 554D31 Control of dimmable lamps, including LED without minimum load Output
More informationStandard RS232 RS ma
1 / 5 CONTROL AND VISUALIZATION OF AC CURRENT IN SINGLE PHASE LINES BY EXTERNAL SHUNT Function Operating mode Current control Frequency control DC component control Shunt Timer Resolution Current precision
More information