Honeywell HomMed Wireless Scale Quick Reference Guide
|
|
- Barrie Burke
- 5 years ago
- Views:
Transcription
1 Honeywell HomMed Wireless Scale Quick Reference Guide Wireless Scale Bluetooth Enabled (Optional Peripheral) Introduction This Quick Reference Guide together with the Genesis DM Manual are both training materials provided to instruct the user on the proper operation and installation of vital sign measuring equipment. Users need to review operating procedures on a regular basis, paying special attention to Caution statements. Make sure to keep this training guide as well as the Genesis DM Manual available while using the hardware. This document is designed as a Quick Reference Guide only, and it should be used in combination with the Genesis DM Manual, and Telehealth Monitor Programming/Troubleshooting Guide, as it does not cover all aspects, features or functions of the Genesis DM Telehealth Monitor. This Quick Reference Guide is designed to help you perform the basic steps for adding/installing a wireless Bluetooth scale in the wireless operational mode. Honeywell HomMed Customer Service Toll-free: Phone: Fax: Honeywell HomMed Corporate Offices Honeywell HomMed 3400 Intertech Drive Suite 200 Brookfield, WI Phone: (262) Fax: (262) P4607EN.01 12/2010 1
2 Customer Service Honeywell HomMed, LLC 3400 Intertech Drive Suite 200 Brookfield, Wisconsin Toll-free: (888) Phone: (262) Fax: (262) Copyright Trademarks Copyright 2010 Honeywell HomMed, LLC. All rights reserved. This document and any accompanying Honeywell HomMed products are copyrighted by Honeywell HomMed, LLC. Any reproduction and/or distribution without prior written consent from Honeywell HomMed is strictly prohibited. Please refer to any software End User License Agreement for additional details regarding Honeywell HomMed software products. HomMed is a registered trademark of Honeywell HomMed, LLC. LifeStream is a registered trademark of HomMed, LLC. This Quick Reference Guide provides important information that you need to know before you start using the Honeywell HomMed Bluetooth Enabled Wireless Scale and Genesis DM Monitor. The information herein supports software versions 4.11.xxA and later. Indications for use The Honeywell HomMed Genesis DM Monitor is intended for personal use where use of the system allows retrospective review of certain physiological functions. The Genesis DM Monitor collects vital signs data (including noninvasive blood pressure, pulse rate, and weight plus data from optional add-on devices) then can transmit the data to a central viewing station via a communication network. The Genesis DM Monitor is intended for use with adult and pediatric patients over twelve years of age. Contraindications The Genesis DM monitor is not an emergency medical response device. The monitor does not have auditory or visual alarms for out-of-limit parameters. The Genesis DM monitor does not provide real-time, critical-care monitoring of patient vital signs. All data is transmitted to your monitoring platform, such as to the LifeStream platform or to Central Station 3.5 (Central Station) platform and examined in a retrospective manner by qualified health professionals. Who should read this guide? This Honeywell clinician manual has been specifically prepared for those using the Genesis DM Monitor in healthcare applications, including but not limited to administrative management personnel, clinicians such as medical care managers and nurses, and technical support staff. The information in this guide provides the instructions needed to install, and use the Honeywell HomMed Wireless Scale with the Genesis DM Monitor. P4607EN.01 12/2010 2
3 Product Description Scale The Honeywell HomMed scale is available in regular (Wired) and Bluetooth (Wireless) versions. The scale has a capacity of 500 lb (227 kg) and collects weight using four load cells, one in each corner of the scale. The accuracy of the weight is +/- 0.5 lb (0.2kg). The Genesis DM supplies power and communication to the scale through the scale cord, or the scale can operate in a battery powered mode. NOTE: Bluetooth is a proprietary, open wireless method for exchanging data within relatively short distances using radio signals. For more information, see Gravity Adjustment: The scale is adjusted for gravity in the location to which HomMed is shipping it. Any relocation to a different gravity zone requires re-verification by HomMed. Any damage or recalibration may also require re-verification. The following table identifies distinguishing features of each scale. The Bluetooth scale does NOT have adjustable feet. Feature Honeywell HomMed Wireless Scale Size Approximately 15.75" by 14" Shape Curved Surface texture Round textured pattern Feet Fixed Scale cord 4-pin MiniDIN Blue to monitor and DB9 serial connector to scale The Honeywell HomMed scale is not a stand-alone device. The scale must be connected to a Honeywell HomMed monitor to operate. Step-by-Step Instructions covered in this guide are: Installing the Honeywell HomMed Bluetooth adapter Connecting one wireless scale Connecting when multiple wireless scales are in the area. Using the Scale during a Scheduled Reading Troubleshooting P4607EN.01 12/2010 3
4 Connecting a HomMed Bluetooth (wireless) Scale These instructions cover preparing the DM Monitor to use a Bluetooth adapter and wireless Honeywell HomMed Bluetooth Scale. Three basic actions are involved: 1. Installing the Honeywell HomMed Bluetooth adapter. 2. Connecting one wireless scale. 3. Connecting when multiple wireless scales are in the area. The DM Monitor must be configured to use a Bluetooth wireless scale. After completing the configuration process, the Scale is ready for use. The configuration process would only need to be repeated if the monitor will be used with a different wireless scale or if the monitor will be used with the regular wired scale. Installing the Honeywell HomMed Bluetooth adapter The wireless scale kit includes a Bluetooth Adapter and an Adapter Cable. If needed, securely connect the Adapter Cable to the Bluetooth Adapter, (Note: they should arrive already connected together in the monitor kit). For the Bluetooth Adapter, assure that the slide switch on the top of the Adapter is positioned toward the Connector end of the adapter to enable proper transmission and data flow between the wireless scale and the DM Monitor. P4607EN.01 12/2010 4
5 What is the slide switch? The slide switch is part of the adapter. The slide switch allows different positions to be selected for different adapter functionality. The slide switch is not an ON / OFF switch; therefore, the slide switch is not a power switch, but must be in the proper position in order to enable proper transmission and data flow between the wireless scale and the DM Monitor. With the DM monitor power OFF, plug the Adapter Cable into the Scale port at the back of the monitor, or the wireless scale will not be sensed properly. The adapter is equipped Adapter Cable Scale Port Bluetooth Adapter The adapter is equipped with light emitting diodes (LEDs) to indicate various conditions: Blue Blinking = Scanning for / communicating with Bluetooth devices Solid Blue = Adapter has connected to scale Solid Red = Power On Light Green = Indicates data transfer P4607EN.01 12/2010 5
6 After connecting the Bluetooth Adapter and Adapter Cable to the DM Monitor and making sure that the slide switch is toward the connector end, power ON the DM Monitor. When prompted, enter the Setup Wizard by pressing YES. Enter Setup Wizard? (Yes/No) Connecting One Wireless Scale: The monitor will direct the user to place the Scale in its final position and the display will indicate this, along with the request to press (Yes) to continue. Place Scale in Final Position and Press YES when done Power up the scale (using either batteries or the AC power adapter supplied), and place the scale in a position convenient for the patient. Press YES to allow the monitor to detect the scale. NOTE: The scale should be less than 30 feet (10 meters) from the monitor for signal acquisition. The reason that the scale should be less than 30 feet (10 meters) from the monitor is that the signal between the two devices only works within such relatively short distances. If P4607EN.01 12/2010 6
7 the scale and monitor are too far apart, or if items or personnel are blocking the signal, then the scale and monitor will not be able to connect and communicate with one another as needed for proper functionality. The monitor will display the Please Wait Scanning Devices message as it scans for suitable Bluetooth devices in the nearby vicinity. The DM Monitor locates, senses, and pairs with a single scale automatically. Please Wait Scanning Devices NOTE: Establishing communications may take several minutes. The Bluetooth adapter activity light emitting diodes will flash blue and red. When the blue diode is flashing, the Bluetooth devices in the vicinity are being scanned, sensed, and connected to the DM Monitor. The blue LED is the Number One LED. The red LED should be ON, indicating that the adapter is powered by the monitor. Check the DM Monitor-to-Bluetooth adapter connection if the red LED is not ON. P4607EN.01 12/2010 7
8 When a single scale is detected and paired with the monitor, the monitor will display the Pairing Successful message. If there is only one scale in the vicinity, that scale will be the one that the monitor will pair with. Pairing Successful If the monitor is unable to detect the scale, it will display the Pairing Failed message. Pairing Failed If the pairing failed, check to make sure that the scale has power and that the adapter is properly connected to the monitor and that the Bluetooth adapter red LED is ON. Also, verify that the scale is located close enough to the monitor, and less than 10 meters or about 30 feet away. After a failed attempt to detect a wireless scale, the DM Monitor screen will ask if you desire a scan for available Bluetooth devices. After verifying that the scale has power and is the appropriate distance from the monitor, press YES to retry. P4607EN.01 12/2010 8
9 Scan for Available BT Devices? [YES] or [No] When the scale is detected, the monitor will display the Pairing Successful message. Pairing Successful Complete the Setup Wizard in the normal manner. P4607EN.01 12/2010 9
10 Connecting when multiple wireless scales are in the area To configure the DM Monitor for use when there are multiple wireless scales in the area, before beginning the pairing process, verify the serial number of the scale that you wish to pair with the monitor. The serial number is located on the bottom of the scale. You may write the Serial Number here for reference purposes: After verifying the serial number, power ON the DM Monitor. STARTING GENESIS DM When prompted, enter the Setup Wizard by pressing YES. Enter Setup Wizard? [YES] or [NO] The DM Monitor and Bluetooth Adapter will sense the presence of multiple devices. Press YES to continue. P4607EN.01 12/
11 Please Wait Scanning Devices... NOTE: Establishing communications may take several minutes. The monitor will prompt the user to place the Scale in its final position. Place Scale in Final Position Assure that there is power to the scale, supplied either by the scale batteries or the scale AC power adapter. Place the scale in a position convenient for the patient. NOTE: The scale should be less than 30 feet (10 meters) from the monitor for signal acquisition. Press YES to allow the monitor to detect the scale. The monitor will display the Please Wait Scanning Devices message as it scans for suitable Bluetooth devices in the nearby vicinity. P4607EN.01 12/
12 Please Wait Scanning Devices... NOTE: Establishing communications may take several minutes. During the Paring process the Bluetooth adapter blue LED (light emitting diode) will flash on and off, indicating activity. The red LED should be ON, indicating that the adapter is powered by the monitor. Check the DM Monitor-to-Bluetooth adapter connection if the red LED is not ON. When the blue diode is flashing, the Bluetooth adaptor is searching for devices in the vicinity. When the DM Monitor and Bluetooth Adapter have located the suitable devices in the area, a list will appear and prompt the user to select a scale to pair to the monitor. Only one device or serial number is displayed on the monitor at a time. Pressing the NO button, for example, goes down the list, from 1 to 2 to 3 to 4... back to 1. Pressing the YES button goes up the list, from 1 to the end of the list... to 4 to 3 to 2 to 1. The RETEST button selects the currently displayed serial number. IMPORTANT If a scale serial number appears on the monitor display screen for more than 30 seconds, the monitor will automatically select and pair with that scale. NOTE: If the monitor pairs to a different scale than the one desired, see the Bluetooth Wireless Scale Troubleshooting section that appears after this section. Select Scale To Pair P4607EN.01 12/
13 Press the NO key to continue to the next number. Select Scale To Pair Again, press the NO key to continue to the next number. Select Scale To Pair When the selected scale is detected and paired with the monitor, the monitor will display the Pairing Successful message. Pairing Successful After the Pairing Successful message appears, complete the Setup Wizard in the normal manner. The monitor will then be ready for use, programmed with the wireless scale. P4607EN.01 12/
14 Using the Scale during a Scheduled Reading: During a scheduled reading, the monitor will display the following message when attempting to communicate with the wireless scale: Preparing Scale Please Wait When communication is established, the user will be prompted to step on the scale as in normal (wired) operation. If the monitor is configured for voice prompting, the audible message will be Please step on the scale STEP ON SCALE o o o o o o o o o o When the scale senses, through a series of signal transactions, that the person being weighed has stabilized on the scale, then the weight will display. The display of the weight may take a moment. P4607EN.01 12/
15 220 LBS When the weight sensing is complete, the audible message will be Please, step off the scale. STEP OFF SCALE o o o o o o o o o o This completes the installation and use of the Wireless Scale. If you have any questions regarding the Wireless Scale please contact Honeywell HomMed Customer Service at P4607EN.01 12/
16 Troubleshooting: If communication cannot be established, the monitor will display one of the following error messages; Error Code E203, E204 or E205, Scale Disconnected: E203 error code: The Bluetooth Adapter is not plugged in properly to the back of the monitor. Solution: Check the connection on the rear panel and retry. ERROR CODE: E203 Scale Disconnected E204 error code: Bluetooth Adapter is not paired to the scale. Solution: Check the Bluetooth Adapter. Make sure that the Bluetooth Adapter is powered ON and that it is properly connected to the Adapter Cable, and that the Adapter Cable is properly connected to the DM Monitor at the Scale port on the rear panel of the DM Monitor. Retry. ERROR CODE: E204 Scale Disconnected P4607EN.01 12/
17 E205 error code: No Bluetooth connection because the scale is not powered, the scale batteries are absent, improperly installed, or need replacement, or the scale is too far away from the monitor. Solution: To correct the error, check that there is power to the scale, or that it is located within range of the monitor (approximately 10 meters, or 30 feet). Reschedule another vitals collection to retry. ERROR CODE: E205 Scale Disconnected Changing batteries (if applicable) To change the batteries, turn the scale over. Use a Phillips screwdriver to remove the screw retaining the battery access panel to the scale. Observe the orientation of the four AA batteries inside the scale. Remove the batteries and replace with four new AA batteries for best results. NOTE: The DM Monitor MUST BE RESTARTED after changing the batteries. This is because the Bluetooth wireless scale is not configured to give a zero weight reading ( zeroed ) on power up. The scale is only zeroed during monitor startup when the monitor does the scale self test. This is unique to the Bluetooth wireless scale including when the AC adapter is being used. For other scales, the DM Monitor will automatically zero the scale on scale power up. Zeroing the scale After changing batteries on the Bluetooth wireless scale, return the scale to its normal position and assure that there are no items on the scale. Re-start the DM Monitor. The monitor will conduct a scale self-test and zero the scale for optimal accuracy of weight readings. Check the zeroing to assure that zero 0 appears on the monitor display. P4607EN.01 12/
All headers in the table of contents are clickable. Additional links are indicated by a double underline.
For any questions regarding your Genesis Touch: Customer Service 1-888-353-5440 Scan to Visit the Website: Visit us on the Web http://www.hommed.com/customer-service/ Browse the Getting Started Guide http://www.hommed.com/customer
More informationGenesis DM Manual. Honeywell HomMed Customer Service Toll-free: Phone: Fax:
Genesis DM Manual Honeywell HomMed Customer Service Toll-free: 888-353-5404 Phone: 262-252-5840 Fax: 262-252-6105 Honeywell HomMed Corporate Offices Honeywell HomMed 3400 Intertech Drive Suite 200 Brookfield,
More informationUser Manual. Model 1372A and 1374A HDMI Switchers. 1T-SX-632 Model 1372A 2X1 Switcher. v1.3 2x1 SWITCHER. v1.3 INPUT ENHANCE POWER
User Manual 1T-SX-632 Model 1372A 2X1 Switcher v1.3 v1.3 2x1 SWITCHER 1 2 INPUT ENHANCE POWER 1 2 INPUT ENHANCE POWER Model 1372A and 1374A HDMI Switchers Table Of Contents 1.0 Introduction.......................
More informationProfessional Media Server Quick Start Guide
ipump 6400 Professional Media Server Quick Start Guide Figure 4. ipump Web Interface Status Page 6. Shut down your ipump from the front panel. Navigate from the home screen to the Shutdown screen as follows:
More informationKamai Hybrid TV Media Player
Kamai Hybrid TV Media Player 500 Series Table of Contents Overview What s Included 4 Front and Rear Panel 5 Side Panel Connecting Video 6 High-Definition TVs 7 Standard-Definition TVs Connecting Audio
More informationUSER MANUAL. DV-HSW-41 HDMI 4x1 SWITCHER LIT Bergen Boulevard, Woodland Park, NJ Tel FAX Web
USER MANUAL DV-HSW-41 HDMI 4x1 SWITCHER 244 Bergen Boulevard, Woodland Park, NJ 07424 Tel 973-785-4347 FAX 973-785-3318 Web www.fsrinc.com LIT1372 PROPRIETARY INFORMATION All information in this manual
More informationPulse Biomedical QRS-Card Tango M2 Interface Notes
Pulse Biomedical QRS-Card Tango M2 Interface Notes To setup Tango M2 with your stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232 Cable used to communicate
More informationMortara X-Scribe Tango+ Interface Notes
Mortara X-Scribe Tango+ Interface Notes To setup Tango+ with the X-Scribe stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232 Cable used to communicate
More informationSix-Channel TDM Multiplexers for 3G, HD, SDI, and ASI. Installation and Operations. Manual
Manual DigiLink DLC156 Function modules Six-Channel TDM Multiplexers for 3G, HD, SDI, and ASI Installation and Operations Manual WWW.ARTEL.COM ii DLC156 Function Modules Installation and Operations Manual
More informationCardioline Cube Stress Tango M2 Interface Notes
Cardioline Cube Stress Tango M2 Interface Notes To setup Tango M2 with the Cube stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232 Cable used to communicate
More informationInstallation Note. Agilent 89441A Option AYC Installation Kit
Installation Note Agilent 89441A Option AYC Installation Kit Part Number: 89441-90074 Printed in USA February 2002 Notice. The information contained in this document is subject to change without notice.
More informationUSER INSTRUCTIONS MODEL CSI-200 COAXIAL SYSTEM INTERFACE
USER INSTRUCTIONS MODEL CSI-200 COAXIAL SYSTEM INTERFACE 9350-7676-000 Rev B, 5/2001 PROPRIETARY NOTICE The RTS product information and design disclosed herein were originated by and are the property of
More informationHD Wireless Sender & Receiver
HD Wireless Sender & Receiver Model no.bchdmiwe 1080P Wireless HDMI Transmission including 3D video INTRODUCTION Thank you for purchasing BCHDMIWE HD Wireless sender & receiver. Your satisfaction is very
More informationGE CardioSoft (Version 6.01 or higher) Tango M2 Interface Notes
GE CardioSoft (Version 6.01 or higher) Tango M2 Interface Notes To setup Tango M2 with your CardioSoft (V6.01 or higher), simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables
More informationIoT Toolbox Mobile Application User Manual
Rev. 0 19 December 2017 User Manual Document information Info Keywords Abstract Content User Manual, IoT, Toolbox The IoT Toolbox is a mobile application developed by NXP Semiconductors and designed for
More informationMarquette Case 12, Case 15, Case 16, and Centra Stress Systems Tango M2 Interface Notes
Marquette Case 12, Case 15, Case 16, and Centra Stress Systems Tango M2 Interface Notes To setup Tango M2 with your stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger
More informationMP-7424 Football Scoreboard with MP5000 Console
MP-7424 Football Scoreboard with MP5000 Console With additional instructions for Track and Soccer Operator s Manual Volume VII Rev. 10/17/07 Table of Contents Table of Contents...2 1.0 Keypad Console...3
More informationOperator s Manual. Ultegra. Health Scale. Fairbanks Scales by Fairbanks Scales Inc. All rights reserved. Revision 5 06/07
Operator s Manual Ultegra Health Scale Fairbanks Scales 2007 by Fairbanks Scales Inc. All rights reserved 50735 Revision 5 06/07 Amendment Record Ultegra Health Scale 50735 Manufactured by Fairbanks Scales
More informationInstallation Note. Option GHz Operation Upgrade Kit. For 8753E and 8753ES Network Analyzers. Applicable Upgrade Kit Model Number
Installation Note Option 006 6 GHz Operation Upgrade Kit For 8753E and 8753ES Network Analyzers Network Analyzer Model Number Applicable Upgrade Kit Model Number 8753E 8753EU Option 006 8753ES 8753ESU
More informationBurdick Quest Tango M2 Interface Notes
Burdick Quest Tango M2 Interface Notes To setup Tango M2 with the Quest stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232 Cable used to communicate
More informationMONOPRICE. BitPath AV HDMI Extender over Single Cat6 Cable, 120m. User's Manual P/N 16228
MONOPRICE BitPath AV HDMI Extender over Single Cat6 Cable, 120m P/N 16228 User's Manual SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to
More informationConnevans.info. DeafEquipment.co.uk. This product may be purchased from Connevans Limited secure online store at
Connevans.info Solutions to improve the quality of life Offering you choice Helping you choose This product may be purchased from Connevans Limited secure online store at www.deafequipment.co.uk DeafEquipment.co.uk
More informationHardware Setup. HP Dual TV Tuner/Digital Video Recorder. Document Part Number:
Hardware Setup HP Dual TV Tuner/Digital Video Recorder Document Part Number: 374787-001 November 2004 This guide provides steps to help you set up your HP Dual TV Tuner/Digital Video Recorder hardware
More informationHD Wireless Sender & Receiver
VTRA3411BK HD Wireless Sender & Receiver User manual 1080P Wireless HDMI Transmission including 3D video INTRODUCTION Thank you for purchasing VTRA3411BK HD Wireless sender & receiver. Your satisfaction
More informationModel 1421 Distribution Amplifier
Model 1421 Distribution Amplifier Installation and Operating Instructions The 1421 Distribution Amplifier provides four independent, wide bandwidth outputs from one video input. The unit is color compatible
More informationMONOPRICE. BitPath AV VGA Wireless Transmitter & Receiver Kit, 200m. User's Manual P/N 16224
MONOPRICE BitPath AV VGA Wireless Transmitter & Receiver Kit, 200m P/N 16224 User's Manual SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention
More informationModel: S-4904T/R. Wireless HD Transmission System. User Manual. Please read this User Manual throughout before using.
Model: S-4904T/R Wireless HD Transmission System User Manual Please read this User Manual throughout before using. Preface Congratulations on your purchase of this product. Please read this user manual
More informationMaxView Cinema Kit Quick Install Guide
SYSTEM SETUP The MaxView will work at any of the following display settings: INSTALLATION MaxView Cinema Kit Quick Install Guide Step 1 - Turn off your computer. Disconnect your monitor s VGA cable from
More informationSchiller AT-10 plus Tango M2 Interface Notes
Schiller AT-10 plus Tango M2 Interface Notes To setup Tango M2 with the AT-10 plus stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232 Cable used to
More informationCheck our knowledge base at
USER MANUAL Check our knowledge base at www.paralinx.net/support Copyright 2015 Paralinx LLC All Rights Reserved TABLE OF CONTENTS 1 Important Notice 10 LCD Screen 2 Safety Instructions 11 Indicators 3
More informationCOMPOSITE VIDEO LUMINANCE METER MODEL VLM-40 LUMINANCE MODEL VLM-40 NTSC TECHNICAL INSTRUCTION MANUAL
COMPOSITE VIDEO METER MODEL VLM- COMPOSITE VIDEO METER MODEL VLM- NTSC TECHNICAL INSTRUCTION MANUAL VLM- NTSC TECHNICAL INSTRUCTION MANUAL INTRODUCTION EASY-TO-USE VIDEO LEVEL METER... SIMULTANEOUS DISPLAY...
More informationMONOPRICE. BitPath AV 4K HDMI Wireless Transmitter & Receiver Kit, 200m. User's Manual P/N 16223
MONOPRICE BitPath AV 4K HDMI Wireless Transmitter & Receiver Kit, 200m P/N 16223 User's Manual SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention
More informationST8-WiFi Timer. Installation Guide and Operations Manual. English MIN M D YYYY
ST8-WiFi Timer Installation Guide and Operations Manual AM M D YYYY English Contents ST8-WiFi Timer Installation Guide and Operations Manual Introduction Welcome to Rain Bird... 1 Timer Features... 1 Controls
More informationVNS2200 Amplifier & Controller Installation Guide
VNS2200 Amplifier & Controller Installation Guide VNS2200 Amplifier & Controller Installation 1. Determine the installation location for the VNS2200 device. Consider the following when determining the
More informationAW900mT. User s Manual. Point-to-multipoint. Industrial-grade, ultra-long-range 900 MHz non-line-of-sight wireless Ethernet systems
User s Manual Point-to-multipoint Industrial-grade, ultra-long-range 900 MHz non-line-of-sight wireless Ethernet systems User s Manual Non-line-of-sight :: 900 MHz Thank you for your purchase of the multipoint
More informationQuick Start. RSHS1000 Series Handheld Digital Oscilloscope
Quick Start RSHS1000 Series Handheld Digital Oscilloscope General Safety Summary Carefully read the following safety precautions to avoid personal injury and prevent damage to the instrument or any products
More informationHC20 Healthcare Kit Installation Instructions
Our HC20 installation kit uses technology that allows a standard hospital pillow speaker to control a TV and receive audio from the TV at the pillow speaker next to the patient. The HC20 product, when
More informationUser Manual. Model HCX-11 HDMI Coax Extender. Five-Coax Extender Model HCX-11. Five-Coax Extender Model HCX-11
User Manual Model HCX-11 Coax Extender INTERNAL CLOCK B 800-322-8346 859-233-4599 www.audioauthority.com COAX INPUT R G B CLOCK INTERNAL COAX OUTPUT Five-Coax Extender Model HCX-11 G R 12V DC LINK INPUT
More informationInstallation Instructions
SuperBus 2000 Concord 4 GSM Module 466-2262A October 2006 Copyright 2006, GE Security Inc. Introduction This is the GE SuperBus 2000 Concord 4 GSM Module Installation Instructions for part number 600-1053.
More informationQuinton Q-Stress Version 6.x.x Tango M2 Interface Notes
Quinton Q-Stress Version 6.x.x Tango M2 Interface Notes To setup Tango M2 with the Q-Stress cardiac stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232
More informationMortara XScribe Versions 3.xx and 5.xx Tango M2 Interface Notes
Mortara XScribe Versions 3.xx and 5.xx Tango M2 Interface Notes To setup Tango M2 with the XScribe cardiac stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables
More informationPhilips StressVue Tango M2 Interface Notes
Philips StressVue Tango M2 Interface Notes To setup Tango M2 with the StressVue stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232 Cable used to communicate
More informationKODAK Video Monitor CFH-V10
Quick Start Guide CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED
More informationWelch Allyn CardioPerfect Workstation Tango+ Interface Notes
Welch Allyn CardioPerfect Workstation Tango+ Interface Notes To setup Tango+ with the CardioPerfect stress system, simply follow the directions below. 1. Verify Correct RS-232 and ECG Trigger Cables RS-232
More informationDejero LIVE+ 20/20 Transmitter
Dejero LIVE+ 20/20 Transmitter This Dejero kit will allow you to broadcast live from the field, using an NX5 camera kit. Please follow the following steps in order!! 1. Preliminary Check: To set up the
More informationVGA CAT-5 1:8 Distribution S VGA CAT-5 Distribution R. EXT-VGA-CAT5-148S EXT-VGA-CAT5-148R User Manual
VGA CAT-5 1:8 Distribution S VGA CAT-5 Distribution R EXT-VGA-CAT5-148S EXT-VGA-CAT5-148R User Manual INTRODUCTION Congratulations on your purchase of the VGA CAT-5 1:8 Distribution S. Your complete satisfaction
More information1 Unpack. Taking the TV Out of the Box. Included in this Box. Stand Parts and Cables. Remote Control. Also included
MIC TV SEARCH KEYPAD SOURCE VOL VOICE CH RETURN GUIDE EXIT CH.LIST SMART HUB 3D MTS CC P.SIZE MENU INFO 1 Unpack Taking the TV Out of the Box Warning: Do not touch the TV s screen when you take it out
More informationStart Up or Shut Down Hunting Function. Using the Receiver. If there is a short circuit in the cable, it will display as follows:
If there is a short circuit in the cable, it will display as follows: Push key (No) to exit calibration function. Push key (Yes) to repeat measurement process. 11 Note: The calibration will recover the
More informationVGA CAT-5 1:8 Distribution S VGA CAT-5 Distribution R
VGA CAT-5 1:8 Distribution S VGA CAT-5 Distribution R EXT-VGA-CAT5-148S EXT-VGA-CAT5-148R User Manual www.gefen.com ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax
More informationThe only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional
More informationLS 6.0R SERVICE MANUAL
LS 6.0R SERVICE MANUAL 1 TABLE OF CONTENTS CHAPTER 1: SERIAL NUMBER LOCATION CHAPTER 2: CONSOLE OVERLAY AND WORKOUT DESCRIPTION 2.1 Console Description 2.2 Display Windows Description 2.3 Getting Started
More informationRA-RS232, RB-RS232. Setup and Installation Guide Addendum For RadioRA RS232 Interface
RA-RS232, RB-RS232 Setup and Installation Guide Addendum For RadioRA RS232 Interface A Comprehensive Step-by-Step Guide for Programming and Operating the Lutron RadioRA RS232 Interface Note: Please leave
More informationUser Guide. HDMI Fiber Optic Extender. DVI-7350a
User Guide HDMI Fiber Optic Extender DVI-7350a Table of Contents Section Page Product Safety.................................... 1 1.0 Introduction...2 2.0 Specifications...3 3.0 Package Contents...3 4.0
More informationMedset FLASHLIGHT ERGO Tango M2 Interface Notes
Medset FLASHLIGHT ERGO Tango M2 Interface Notes To setup Tango M2 with the Medset Flashlight ERGO stress system, simply follow the directions below. *Note a Tango M2 with ECG is required for this setup.
More informationOperators Manual. TeleWeigh Wired. Model: by Fairbanks Scales, Inc All rights reserved Revision 1 09/07
Operators Manual TeleWeigh Wired Model: 27707 2007 by Fairbanks Scales, Inc. 51164 All rights reserved Revision 1 09/07 Amendment Record TeleWeigh Wired Document 51164 Manufactured by Fairbanks Scales
More informationQuick Operation Guide of LTN7700/7600 Series NVR
Quick Operation Guide of LTN7700/7600 Series NVR UD.6L0202B0042A02 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable
More informationIndustrial Monitor Update Kit
Industrial Monitor Update Kit (Bulletin Number 6157) Installation Instructions 2 Table of Contents Table of Contents Industrial Monitor Update Kit... 3 Overview... 3 Part 1 - Initial Preparation... 5 Part
More informationEcomind Electricity Monitor Kit EM422EM-E-KBTS EM422EM-E-KMTS. Installation Instructions
Ecomind Electricity Monitor Kit EM422EM-E-KBTS EM422EM-E-KMTS Installation Instructions Contents 1.0 Introduction...3 2.0 Safety...3 3.0 In the box...4 4.0 Installation of sensors...5 5.0 Linking transmitter
More informationHDMI over Wireless Extender p
HDMI over Wireless Extender - 1080p Product ID: ST121WHD2 This HDMI over wireless extender lets you transmit your audio / video signal from an HDMI source to a remote display located up to 165 ft (50m)
More informationR Series Quick Reference Guide
R Series Quick Reference Guide R Series Quick Reference Guide This Quick Reference Guide is intended to provide easy access to most common uses of the ZOLL R Series. The user must read and completely
More informationInstruction Manual.... light years ahead. S739DV & S7739DV Video and Up-the-Coax Control Systems
Instruction Manual... light years ahead S739DV & S7739DV Video and Up-the-Coax Control Systems Fiber Options Federal Communications Commission and Industry Canada Radio Frequency Interference Statements
More informationCELLO SETUP WITH WinGPS CelloSetup_WinGPS(15.9).doc September 17, Contents
F. S. BRAINARD & COMPANY PO Box 366, 5 Terri Lane Unit 15, Burlington, NJ 08016 tel: (609) 387-4300 fax: (609) 387-4304 www.meter-master.com email: cellosupport@meter-master.com CELLO SETUP WITH WinGPS
More informationMONOPRICE. BitPath AV VGA Extender over Single Cat6 Cable, 120m. User's Manual P/N 16226
MONOPRICE BitPath AV VGA Extender over Single Cat6 Cable, 120m P/N 16226 User's Manual SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to
More informationTV Lift System Model CL-65 Installation Instructions
TV Lift System Model CL-65 Installation Instructions Contact: Support@Nexus21.com Toll Free: (866) 500-5438 Phone: (480) 951-6885 Fax: (480) 951-6879 Revised: 01/17/17 Below is a parts list describing
More informationDelmar Reynolds CardioDirect 12-S with CardioCollect Interface Tango M2 Interface Notes
Delmar Reynolds CardioDirect 12-S with CardioCollect Interface Tango M2 Interface Notes To setup Tango M2 with the CardioDirect stress system, simply follow the directions below. 1. Verify Correct RS-232
More informationAgilent 87075C Multiport Test Set Product Overview
Agilent 87075C Multiport Test Set Product Overview A complete 75 ohm system for cable TV device manufacturers Now, focus on testing, not reconnecting! For use with the Agilent 8711 C-Series of network
More information2000i. Projector Replacement Guide. for Projector Replacement Kits. NEC MT1060R ( ) and NEC MT860R ( ) Interactive Whiteboard
2000i Interactive Whiteboard Projector Replacement Guide for Projector Replacement Kits NEC MT1060R (03-00043) and NEC MT860R (03-00041) 99-00496-00 Rev A0 FCC Warning This equipment has been tested and
More informationUnicable II Programmer. IDLU-PROG01-OOOOO-OPP Item: Installation & User Guide
Unicable II Programmer IDLU-PROG01-OOOOO-OPP Item: 5273 Installation & User Guide 1 2 Thank you for purchasing Inverto s advanced Unicable II programmer. Before installing and using the programmer, please
More informationMONOPRICE. Blackbird 4K HDBaseT Extender Kit. User's Manual P/N 21792
MONOPRICE Blackbird 4K HDBaseT Extender Kit P/N 21792 User's Manual SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings
More information2013, 2014 Hewlett-Packard Development Company, L.P.
User Guide 2013, 2014 Hewlett-Packard Development Company, L.P. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
More informationLS 5.0R SERVICE MANUAL
LS 5.0R SERVICE MANUAL 1 TABLE OF CONTENTS CHAPTER 1: SERIAL NUMBER LOCATION CHAPTER 2: CONSOLE OVERLAY AND WORKOUT DESCRIPTION 2.1 Console Description 2.2 Display Windows Description 2.3 Getting Started
More informationCopyright 2018 Xi an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted or transmitted in any
MRV366 Receiving Card Document Version: Document Number: V1.0.1 NS110100658 Copyright 2018 Xi an NovaStar Tech Co., Ltd. All Rights Reserved. No part of this document may be copied, reproduced, extracted
More information4125 system setup and deployment quick start guide
4125 system setup and deployment quick start guide OPERATION IN AIR Do not operate the system while the tow fish in air for extended periods. The system may be enabled to transmit while in air for test
More informationRemote Control. degraded, causing unreliable operation. The recommended effective distance for remote operation is about 16 feet (5 meters).
Media Streaming Sound Bar RTS736W User Manual Remote Control using the remote control Point the remote control at the REMOTE SENSOR located on the unit (see Front Panel illustration for precise location).
More informationDesigned in Colorado, USA. Bluetooth Cable. Quick Start Guide
Designed in Colorado, USA Bluetooth Cable Quick Start Guide Registration + Maintenance Tips Congratulations on purchasing your new Bluetooth cable! Make sure to register your new cable and be the first
More informationThe amazing power of FiOS starts here.
SELF-INSTALLATION GUIDE The amazing power of FiOS starts here. LET S GET STARTED Welcome to a network that s light years ahead. Welcome to life on FiOS. Congratulations on choosing Verizon FiOS! You re
More informationEMERSON SMART WIRELESS RADIO SILENCE REPORT
EMERSON SMART WIRELESS RADIO SILENCE REPORT 05.21.10 Prepared by For Last updated On Friday, 2.0.docx Page 1 of 12 Table of Contents 1 Introduction... 3 1.1 Purpose & Scope... 3 1.2 Applicable Documents...
More informationVNS2210 Amplifier & Controller Installation Guide
VNS2210 Amplifier & Controller Installation Guide VNS2210 Amplifier & Controller Installation 1. Determine the installation location for the VNS2210 device. Consider the following when determining the
More informationNX APPLICATION NOTE Led Guided Assembly Connector Pinning with Continuity
NX APPLICATION NOTE Led Guided Assembly Connector Pinning with Continuity Background Many wire harness connectors are designed to use a push-click-pull method of wire insertion. This method requires the
More informationUser Manual. Model 1351 DVI Repeater with HDCP
User Manual Model 1351 DVI Repeater with HDCP 2 Table Of Contents 1.0 Introduction....................... 4 2.0 Specifications...................... 5 3.0 Checking Package Contents............... 7 4.0
More information1 Unpack. Taking the TV Out of the Box. Included in this Box. Stand Parts and Cables. Remote Control. Also included
MIC TV SEARCH KEYPAD SOURCE VOL VOICE CH RETURN GUIDE EXIT CH.LIST SMART HUB 3D MTS CC P.SIZE MENU INFO 1 Unpack Taking the TV Out of the Box Warning: Do not touch the TV s screen when you take it out
More informationAEROTRAK PORTABLE AIRBORNE PARTICLE COUNTER MODEL 9110 QUICK START GUIDE
AEROTRAK PORTABLE AIRBORNE PARTICLE COUNTER MODEL 9110 QUICK START GUIDE Thank you for purchasing a TSI AeroTrak Model 9110 Portable Airborne Particle Counter (particle counter). This guide will help you
More informationK Service Source. Apple High-Res Monochrome Monitor
K Service Source Apple High-Res Monochrome Monitor K Service Source Specifications Apple High-Resolution Monochrome Monitor Specifications Characteristics - 1 Characteristics Picture Tube 12-in. diagonal
More informationBY-HPE11KTA. Operating Instructions. Coaxial - LAN Converter with PoE function. Indoor Use Only. Model No. Attached Installation Guide
Operating Instructions Coaxial - LAN Converter with PoE function Model No. Indoor Use Only BY-HPE11KTA Attached Installation Guide Before attempting to connect or operate this product, please read these
More informationMONOPRICE. BitPath AV SDI Extender over Single Cat6 Cable, 120m. User's Manual P/N 16227
MONOPRICE BitPath AV SDI Extender over Single Cat6 Cable, 120m P/N 16227 User's Manual SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to
More informationScoreboard Operator s Instructions MPCX Volleyball Control
Scoreboard Operator s Instructions MPCX Volleyball Control Since 1934 Retain this manual in your permanent files Rev. 2/3/2012 135-0137 These Instructions are for the Following Models: LED models: Incandescent
More informationK Service Source. Apple High-Res Monochrome Monitor
K Service Source Apple High-Res Monochrome Monitor K Service Source Specifications Apple High-Resolution Monochrome Monitor Specifications Characteristics - 1 Characteristics Picture Tube 12-in. diagonal
More informationSUBCARRIER TRANSFER FILTER INSTRUCTION BOOK IB622702
SCF611S SUBCARRIER TRANSFER FILTER INSTRUCTION BOOK IB622702 SCF611S SUBCARRIER TRANSFER FILTER TABLE OF CONTENTS PAGE SHIPPING INSPECTION 2 MODULE CONFIGURATION 2 INSTALLING MODULES 2-3 CABLING 3 FRONT
More informationUSER MANUAL. DV-HXT-2 HDMI to CAT5e /6 EXTENDERS LIT1374
USER MANUAL DV-HXT-2 HDMI to CAT5e /6 EXTENDERS 244 Bergen Boulevard, Woodland Park, NJ 07424 Tel 973-785-4347 FAX 973-785-3318 Web www.fsrinc.com LIT1374 Proprietary Information All information in this
More informationAS-300D Series Smart Bench Scales Owner s Manual
DETE CTO A Division of Cardinal Scale Manufacturing Co. AS-300D Series Smart Bench Scales Owner s Manual 8527-M214-O1 Rev B 01/03 PO BOX 151 WEBB CITY, MO 64870 417-673-4631 Printed in USA INTRODUCTION
More informationVGA to DVI Extender over Fiber SET
VGA to DVI Extender over Fiber SET Model #: FO-VGA-DVI 2011 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. ( Avenview ) products. Avenview
More informationMultiroom Solution Guide HDR-3000T + H3
Multiroom Solution Guide HDR-3000T + H3 Contents What s in the box?... 3 How multiroom solution works... 4 How to connect H3 and HDR-3000T... 5 How to pair H3 and HDR-3000T... 7 What you can do with multiroom
More informationUser Manual. SWIT ELECTRONICS CO., LTD Model: S-4904P Wireless HD Transmission System(with Panel Receiver) Ver:A
SWIT ELECTRONICS CO., LTD Model: S-4904P Wireless HD Transmission System(with Panel Receiver) User Manual Ver:A Please read this User Manual throughout before using Preface 1. All internal technologies
More informationTwin Beam Scale Operation Manual. April Specialists in Industrial Weighing
Twin Beam Scale Operation Manual April 2007 Digi-Tron Specialists in Industrial Weighing www.digitronbalancas.com.br Twin Beam Scale Operation Manual Introduction Dear User, This manual contains operating
More informationWireless 1080P HDMI Video Kit - Mid-Range
Wireless 1080P HDMI Video Kit - Mid-Range Installation Guide Introduction The Wireless 1080P HDMI Video Kit - Mid-Range transmits HDMI A/V signals up to 165ft (line-of-sight) wirelessly and supports high-definition
More informationSwiftMix Automation Safety
Operations Manual SwiftMix TM Automation Thank you for your purchase of the SwiftMix automation for the 5088 console. Everyone at Rupert Neve Designs hopes you enjoy using this tool as much as we have
More informationKramer Electronics, Ltd. USER MANUAL. Model: VS x 1 Sequential Video Audio Switcher
Kramer Electronics, Ltd. USER MANUAL Model: VS-120 20 x 1 Sequential Video Audio Switcher Contents Contents 1 Introduction 1 2 Getting Started 1 2.1 Quick Start 2 3 Overview 3 4 Installing the VS-120 in
More informationCRYPTOPAY QUICK START GUIDE
CryptoPay Pre-Installation Check List: Please confirm the following before installing your CryptoPay Credit Card System: Do you have a working wired internet connection at the wash location where you are
More informationExtender w/ RS-232 and 2-way IR
Extender w/ RS-232 and 2-way IR GTB-UHD2IRS-ELRPOL-BLK User Manual Release A3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions.
More informationDTA Easy Setup Guide. Installation Operation Troubleshooting
DTA Easy Setup Guide Installation Operation Troubleshooting Table of Contents What s included in this Install... Kit 4 Items that you may also need....5 Start Here... 6 Connecting to a TV (No VCR )....8
More information