Service Bulletin B-SERIES AIRCRAFT HEATERS SUPERSEDURE DATA FOR CURRENT HEATER CONFIGURATION
|
|
|
- Steven Heath
- 5 years ago
- Views:
Transcription
1 PO Box 273 Fort Deposit, AL (334) (334) Fax Service Bulletin Bulletin No. A-101, Rev. D Issue Date: March 21, 2003 Technical Content is FAA Approved B-SERIES AIRCRAFT HEATERS SUPERSEDURE DATA FOR CURRENT HEATER CONFIGURATION PREFACE: Aircraft installations using JANITROL B-SERIES HEATERS have undergone certain product improvements that are available to users in order to upgrade the performance of their Combustion Heaters. This Service Letter is to advise users of those improvements and recommend upgrade of their particular Heater at the next required Major Overhaul. The purpose of this Letter is to reduce field problems with older technology Heaters through supersedure to later, improved designs. 1. The attached chart shows the supersedure data by aircraft installation and JANITROL HEATER MODEL for that installation. The chart is annotated with an asterisk (*) indicating the current production model of a given Heater. Also noted is the major change element between models showing the continual upgrade of that model. 2. It is recommended that users upgrade their Heaters to the current production model at the next required major overhaul (see following paragraph regarding FAA AD-NOTE # and required overhaul period). For example, the PA31T/T1 CHEYENNE original installation used a 62D33 JANITROL HEATER and subsequent upgrades involving joint effort between PIPER and JANITROL engineering have resulted in the 10E21-4EL as the latest version incorporating an improved ignition system, sparkplug, fuel feed, and combustion tube. 3. FAA AD-NOTE # on these same B-Series Heaters requires periodic inspections to assure the integrity and airworthiness of the Combustion Tube in each Heater. Heaters failing a pressure decay test at these periodic inspection intervals require a major overhaul including replacement of the Combustion Tube (generally referred to as a MAJOR overhaul). The inspection interval then reverts back to the initial 500 hour period or the same as a new Heater. It is at this point of major overhaul that upgrade of the Heater to current production specifications is recommended. 4. Users will find that problems are reduced; spare parts, service, and future upgrades will be more available to continue trouble free flying. 5. Actual installation authority is determined by the airframe manufacturer and installers should refer to the manufacturer s current publications or obtain FAA Field Approval for change in original equipment. The new models (EL Series) are form, fit, and function interchangeable with the original models; there are no installation differences. REVISION DATA: Original - August 1995 Revision - November Added Models and Corrected Applicability Data Revision - September Corrected Applicability Data Revision - February Removed reference to FAA Form 337 Revision - March 21, Deleted number 4, and renumbered accordingly. March 21, 2003 Kelly Aerospace Service Bulletin No. A-101, Rev. D Page 1 of 5
2 PIPER HEATER MODEL CHANGE AZTEC, 12 VDC 37D77 B3040 ORIGINAL - Calibrated Head PA-23 37D77-1 B3040 Standard Head, 1973 * 37D77-1EL B3500 Extended Life Tube AZTEC, 24 VDC 45D70 B3040 ORIGINAL - Calibrated Head PA-23 45D70-1 B3040 Standard Head, D70-2 B3040 Auto Reset - O/T Switch * 45D70-2EL B3500 Extended Life Tube COMANCHE, TWIN 20D35 B2030 ORIGINAL - Calibrated Head PA-30 20D35-1 B2030 Std. Head, Ign. Upgrade * 20D35-1EL B2500 Extended Life Tube NAVAJO, STD 39D59 B3040 ORIGINAL - Calibrated Head PA-31 B39D59 B3040 Standard Head, 1974 D39D59 B3040 Auto Reset - O/T Switch * D39D59EL B3500 Extended Life Tube NAVAJO, TAIL A39D59 B3040 ORIGINAL - Calibrated Head PA-31 C39D59 B3040 Standard Head, 1975 PA * C39D59EL B3500 Extended Life Tube NAVAJO, PRESS. 47D65 B3040 ORIGINAL - Calibrated Head PA-31P 47D65-1 B3040 Std. head, 1973, Ign. Chg. 47D65-2 B3040 OBSOLETE; see -3 47D65-3 B E75 Sparkplug * 47D65-3EL B3500 Extended Life Tube CHIEFTAIN 65D79 B4050 ORIGINAL - Calibrated Head PA D79-1 B4050 Standard Head, 1973 PA T D79-2 B4050 CTA upgrade 65D79-3 B4050 Auto Reset - O/T Switch * 65D79-3EL B4500 Extended Life Tube CHEYENNE 62D33 B3040 ORIGINAL - Fuel Inlet 47oR PA-31T/T1 62D33-1 B3040 Relocate Fuel Inlet 55oL 63D33-2 B3040 Ign. upgrade 10E21-1 B3040 PHASE I - 10E75 Sparkplug 10E21-2 B3040 PHASE II - Comb. Hd. 10E21-3 B3040 PHASE III - CTA & Fuel Feed 10E21-4 B3040 Auto Reset - O/T Switch * 10E21-4EL B3500 Extended Life Tube T E62-1 B4050 ORIGINAL - new model, 1982 PA-31T3 23E62-2 B4050 Auto Reset - O/T Switch * 23E62-2EL B4500 Extended Life Tube March 21, 2003 Kelly Aerospace Service Bulletin No. A-101, Rev. D Page 2 of 5
3 PIPER HEATER MODEL CHANGE SENECA, 12 VDC 90D38-1 B3040 OPTIONAL - B now std. PA-34 * 90D38-1EL B3500 Extended Life Tube SENECA, 24 VDC 91E88-1 B3040 ORIGINAL - New Model, 1988 PA-34 * 91E88-1EL B3500 Extended Life Tube SEMINOLE 90D38-2 B3040 ORIGINAL - flue change to -1 PA-44 * 90D38-2EL B3500 Extended Life Tube AEROSTAR 22D25 B3040 ORIGINAL - Calibrated Head D25-1 B3040 Standard Head, 1974 * 22D25-1EL B3500 Extended Life Tube AEROSTAR B34D51 B3040 ORIGINAL - Calibrated Head 601P-700P D34D51 B3040 Standard Head, 1973, Ign Chg. * D34D51EL B3500 Extended Life Tube CESSNA HEATER MODEL CHANGE 208 CARAVAN 90E14-1 B4050 OPTIONAL HEATER * 90E14-1EL B4500 Extended Life Tube 303 CRUSADER 19E69-1 B4050 ORIGINAL B4050 * 19E69-1EL B4500 Extended Life Tube 310F-310Q 96C62 B3040 ORIGINAL - Calibrated Head 96C62-1 B3040 Jacket & Switch Changes * 96C62-1EL B3500 CTA Chg & Extended Life Tube 320C-320F 96C62 B3040 ORIGINAL - Calibrated Head SKYNIGHT 96C62-1 B3040 Jacket & Switch Changes * 96C62-1EL B3500 CTA Chg & Extended Life Tube 337, T337 42D79 B2030 ORIGINAL - Calibrated Head SKYMASTER 74D01 B2030 CTA Upgrade 74D01-1 B2030 CTA Change 74D01-2 B2030 Std. Head 74D01-3 B2030 Ignition Upgrade * 74D01-3(EL) B2500 Extended Life Tube 340/340A 02E17-2 B4050 ORIGINAL E55-2 B4050 Blower & Ignition Upgrade * 13E55-2(EL) B4500 Extended Life Tube March 21, 2003 Kelly Aerospace Service Bulletin No. A-101, Rev. D Page 3 of 5
4 CESSNA HEATER MODEL CHANGE 414, 414A 02E17-1 B4050 Std Head CHANCELLOR 13E55-1 B4050 Blower & Ignition Upgrade * 13E55-1(EL) B4500 Extended Life Tube 421C (Serial #201 & up) A34D35 B3040 ORIGINAL - Calibrated Head GOLDEN EAGLE 02E17-1 B4050 Std Head E55-1 B4050 Blower & Ignition Upgrade * 13E55-1(EL) B4500 Extended Life Tube BELL HEATER MODEL CHANGE 206, 206A, 206B 37D88 B2030 Original 1966 A37D88 B2030 Auto Reset - O/T Switch B37D88 B2030 Std Head * B37D88EL B2500 Extended Life Tube 206L 39D90-1 B3040 Original 1974 * 39D90-1EL B3500 Extended Life Tube BEECH HEATER MODEL CHANGE B55,F55,58,58TC 81D94-1 B4050 ORIGINAL BARON ( 75 & UP) 81D94-2 B4050 Overheat Switch Change 81D94-3 B4050 C/A Switch move, New Nozzle * 81D94-3EL B4500 Extended Life Tube 58P 82D20-1 B3040 ORIGINAL P. BARON * 82D20-1EL B3500 Extended Life Tube 82D20-2 B3040 Chg Blower & Cycling SW 07E02-1 B3040 New Version - Press. 81D94 * 07E02-1EL B3500 Extended Life Tube 60,A60 A34D51 B3040 ORIGINAL DUKE C34D51 B3040 CTA & O Heat SW Upgrade * C34D51EL B3500 Extended Life Tube 76 07E94-1 B4050 ORIGINAL - 12VDC DUCHESS * 07E94-1EL B4500 Extended Life Tube 07E94-2 B VDC Version - B4050 * 07E94-2EL B4500 Extended Life Tube March 21, 2003 Kelly Aerospace Service Bulletin No. A-101, Rev. D Page 4 of 5
5 PILATUS HEATER MODEL CHANGE TRI-ISLANDER 90E00-1 B4050 ORIGINAL BRITTEN-NORMAN * 90E00-1EL B4500 Extended Life Tube ISLANDER 94E11-1 B4050 ORIGINAL * 94E11-1EL B4500 Extended Life Tube CANADAIR HEATER MODEL CHANGE CL C80 B4050 ORIGINAL, Calibrated Head 99C80-1 B4050 CO2 Ftg., Sealing * 99C80-2EL B4500 Extended Life Tube CL-215T 91E18-1 B4050 ORIGINAL * 91E18-1EL B4500 Extended Life Tube CLT E18-1 B4050 ORIGINAL * 91E18-1EL B4500 Extended Life Tube PIAGGIO HEATER MODEL CHANGE P166DL3 88D81-1 B3040 ORIGINAL 88D81-2 B3040 Switch Change * 88D81-2EL B3500 Extended Life Tube COMMANDER HEATER MODEL CHANGE 500S 62D95-1B B3040 ORIGINAL * 62D95-1BEL B3500 Extended Life Tube March 21, 2003 Kelly Aerospace Service Bulletin No. A-101, Rev. D Page 5 of 5
Airworthiness Directive
Airworthiness Directive AD No.: 2017-0002 Issued: 09 January 2017 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) 216/2008 on behalf of the European
PILOT S OPERATING HANDBOOK SUPPLEMENT
SOLOY, LLC 450 Pat Kennedy Way SW Olympia, WA 98501 PILOT S OPERATING HANDBOOK SUPPLEMENT AND AIRPLANE FLIGHT MANUAL FOR CESSNA T206H/206H/TU206G/U206G SERIAL NO.: REGISTRATION NO.: This Supplement must
This Service Bulletin may be distributed only to those groups indicated below with a check mark: End-use customers, owners and operators
Document Number: 601-00004-104 Title: MFD Configuration Save and Restore for Release 4.1.1 and 8.1.1 Revision: 01 Date: 09 March 2012 1. Planning Information 1.1 Distribution/Eligibility This Service Bulletin
Integre4. Audiophile integrated amplifier. v1.2
Owner s Manual Integre4 Audiophile integrated amplifier www.lab12.gr v1.2 Table of Contents It is yours Features Unpacking and Warnings Installation & Placement Front Panel Rear Panel Connections Remote
Number 189 May 22, 2008
Tec echnical Bulletin Number 189 May 22, 2008 S.A.F.E. System / F.S.S. Export Water Connection Change For export models manufactured with the optional Sensor Activated Fire Extinguishing (S.A.F.E.) system
TECHNICAL SERVICE. DATE: August 02, 2007 ST
Unitary Products Group 5005 York Drive Norman, OK 73069 1/877-874-7378 TECHNICAL SERVICE DATE: August 02, 2007 ST-028-07 TO: All York Branches and Distributors All York Service Managers All Field Service
This document is a reference document that shows the menus in the 5500sc, 9610sc and 9611sc analyzers. There are 3 top-level menus:
Controller menus 5500sc, 9610sc and 9611sc analyzers DOC273.53.80566 Introduction This document is a reference document that shows the menus in the 5500sc, 9610sc and 9611sc analyzers. There are 3 top-level
OSD. EXECUTIVE / MiniDome USERS MANUAL. USING THE MOTOSAT DISH POINTING SYSTEM EXECUTIVE / MiniDome OSD
EXECUTIVE / MiniDome OSD USERS MANUAL USING THE MOTOSAT DISH POINTING SYSTEM EXECUTIVE / MiniDome OSD MotoSAT Corporation Created April 22, 2003 1-800-247-7486 CONGRATULATIONS! on your purchase of your
Application Note [AN-007] LCD Backlighting Technologies and Configurations
![Application Note [AN-007] LCD Backlighting Technologies and Configurations](/thumbs/81/83266365.jpg "Application Note [AN-007] LCD Backlighting Technologies and Configurations")
Application Note [AN-007] LCD Backlighting Technologies Introduction Liquid Crystal Displays (LCDs) are not emissive i.e. they do not generate their own light. Transmissive and transflective displays require
Subject: DISH Network s Reconfiguration of the 129 W Satellite
Technical Bulletin Date: December 4, 2009 Subject: DISH Network s Reconfiguration of the 129 W Satellite Products Affected TracVision R4SL, R5SL TracVision R4, R5, L3, and S3 systems that have been upgraded
SERVICE BULLETIN MANDATORY SB EFFECTIVITY SERIAL NUMBERS G36 (Bonanza) E-4076 thru E-4079, E-4084
Beechcraft SERVICE BULLETIN MANDATORY SB 34-4167 TITLE NAVIGATION - REPLACEMENT OF NONCONFORMING ALTIMETERS EFFECTIVITY MODEL SERIAL NUMBERS G36 (Bonanza) E-4076 thru E-4079, E-4084 G58 (Baron) TH-2435,
TECHNICAL GUIDE 95.5% AFUE SINGLE STAGE RESIDENTIAL GAS FURNACES MULTI-POSITION MODELS: TG9S
TECHNICAL GUIDE 95.5% AFUE SINGLE STAGE RESIDENTIAL GAS FURNACES MULTI-POSITION MODELS: TG9S NATURAL GAS 40-130 MBH INPUT Due to continuous product improvement, specifications are subject to change without
Instruction Manual MODEL RSP SANITARY ELECTRONIC PRESSURE TRANSMITTER
Instruction Manual Anderson Instrument Co. Inc. 156 Auriesville Road Fultonville, NY 12072 1-800-833-0081 Fax 518-922-8997 www.andinst.com Instrument Model Number Instrument Serial Number MODEL RSP SANITARY
Flash-Point with Closed Cup - Abel Method - ABA 4 (automatic)
Flash-Point with Closed Cup - Abel Method - ABA 4 (automatic) ISO 1516, ISO 1523, ISO 13736, DIN 51755-1, DIN 53213 (obs.), EN 456 (obs.), EN 924, IP 113 (obs.), IP 170, IP 304-1 (obs.), IP 304-2 (obs.),
Sample BD Tech Concepts LLC
XYZ Corp. Fry Controller FC-1234 Software Test Procedure Copyright 2014 Brian Dunn BD Tech Concepts LLC Last Modified: 00/00/0000 Version Tested: Date Tested: Technician: Results: 1 FC-1234 SW Test Proc.
Sentinel I24 Digital Input and Output Configuration
Application Bulletin: #155 Date: October 19, 2007 Sentinel I24 Digital Input and Output Configuration The Sentinel I24 can communicate with external hardware using digital inputs and outputs. There are
Identification - electrical services
Identification - electrical services Aesthetic All live phase cable sheathing to be brown coloured and neutral phase cable sheathing to be blue coloured, all labelled L1, L2, L3 & N respectively in accordance
OPERATION MANUAL OF MULTIHEAD WEIGHER
OPERATION MANUAL OF MULTIHEAD WEIGHER Page 1 of 62 PREFACE Multihead weigher is automatic weighing equipment by using MCU control system to achieve high speed, accuracy and stable performance. Different
AEROTRAK PORTABLE AIRBORNE PARTICLE COUNTER MODEL 9110 QUICK START GUIDE
AEROTRAK PORTABLE AIRBORNE PARTICLE COUNTER MODEL 9110 QUICK START GUIDE Thank you for purchasing a TSI AeroTrak Model 9110 Portable Airborne Particle Counter (particle counter). This guide will help you
PROCESS HEAT. From LE to LHS: How to benefit from Leister s new generation of air heaters. We know how.
PROCESS HEAT From LE to LHS: How to benefit from Leister s new generation of air heaters. We know how. 3 New LHS air heaters from Leister: Compact and reliable. 1 Compact: Small dimensions for installation
CT12A USER INSTRUCTION MANUAL BARFIELD M/N CT12A. Doc. P/N: Revision F November 7, 2014 BARFIELD, INC.
CT12A Digital Cable Tensiometer USER INSTRUCTION MANUAL BARFIELD M/N CT12A Doc. P/N: 56-101-03100 Revision F November 7, 2014 BARFIELD, INC. Corporate Headquarters 4101 Northwest 29th Street Miami, Florida
OVERVIEW LED BACKLIGHT CONTROLLER FAMILY
Dual Mini LED Driver for LCDs OVERVIEW LED BACKLIGHT CONTROLLER FAMILY General Digital s Dual Mini LED Driver PCB is a dual channel, boost-mode LED driver intended to drive Daylight and NVIS combo rails,
Operating Instructions
Operating Instructions Vacuum Transmitters for Diaphragm & Pirani Sensors 24 VDC Power With Pirani Sensors.01 to 100 mtorr.01 to 100 X 10-3 mbar.001 to 13.3 Pa 1 to 2000 mtorr.001 to 2 mbar 0.1 to 200
Digital Differential Pressure Gauge Switch 0.1 : 0.5 BAR USER GUIDE
Digital Differential Pressure Gauge Switch 0.1 : 0.5 BAR USER GUIDE Table of Contents GETTING STARTED DESCRIPTION Display Mechanical Electrical Mounting Programmable Settings Default Factory Settings PARTS
Omnitracs is a trademark of Omnitracs, LLC. All other trademarks are the property of their respective owners.
Omnitracs, LLC 717 N. Harwood Street, Suite 1300 Dallas, TX 75201 U.S.A. Copyright 2010-2015 Omnitracs, LLC. All rights reserved. Omnitracs is a trademark of Omnitracs, LLC. All other trademarks are the
CORESYSTEMS ENGINEERED TO PERFORM
ENGINEERED TO PERFORM ENVIRONMENTAL TEST REPORT < Model#: RCAT-4948E-L-01 Serial#: 11602655001 Software: BurnInTest V8.1 Pro (1013) Test Report Number: 170517 Core Systems Inc. 13000 Danielson Street,
5374 Series Air Activated Tube Tester (For testing straight-through exchanger without removing both heads.)
TM-73 July 15, 2004 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors
SPECIFICATION NO Model 207 Automatic GTAW Welding System
1.0 Introduction The Model 207 is a completely self-contained Gas Tungsten Arc Welding (GTAW) System requiring only input power, inert gas and AMI Welding Head (or manual torch) for operation. Its small
Film-Tech. The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment.
Film-Tech The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. These manuals are designed to facilitate the exchange of information related to cinema
SPECIFICATION NO NOTE
NOTE The Model 207-1 is a special version of the standard M-207 Power Supply. It has been altered for a special applications requiring low current operation at high arc voltages in ambient and pressurized
Ambient NH 3 monitor APNA-370 Instruction Manual CODE:GZ
Ambient NH 3 monitor APNA-370 Instruction Manual CODE:GZ0000080601 Preface This manual describes the operation of the Ambient NH 3 monitor, APNA-370. Be sure to read this manual before using the product
Henry Distin Cornets
Henry Distin Cornets Henry Distin had a long career spanning two countries and four cities for 59 years. This is a summary of the locations and a sample of his cornets found. London: Distin & Sons is founded
Admiss. counterpressure
in survey Multi-layer diaphragm technology High dosing accuracy Safe to run dry High quality materials Leakage-free Low maintenance User-friendly Integrable into automatic processes Manual stroke length
Sport-TIMER 3000 TM Instruction Manual
Sport-TIMER 3000 TM Instruction Manual Sport-TIMER 3000 TM Index of Uses Page Sport-TIMER 3000 TM RECORD OF PURCHASE The Sport-TIMER 3000 TM is fully warranted to the original purchaser against any defects
Sprite TL Quick Start Guide
Sprite TL Quick Start Guide with 115 VAC Power Cord and 4-Conductor Signal Cable Reference Manual Sprite TL Online and downloadable Product Manuals and Quick Start Guides are available at www.hydrosystemsco.com
ATTENTION YOUR NEW KEY FOBS WILL NOT WORK UNTIL YOU HAVE LOADED THEM ON TO YOUR REMOTE CONTROL SYSTEM
ATTENTION YOUR NEW KEY FOBS WILL T WORK UNTIL YOU HAVE LOADED THEM ON TO YOUR REMOTE CONTROL SYSTEM Please identify which remote control system is operating your roller shutter/garage door and follow the
CENTRAL BLOWER COMPANY 211 S. 7th Ave. City of Industry, CA (626) Fax (626)
CENTRAL BLOWER COMPANY 211 S. 7th Ave. City of Industry, CA 91746 (626) 330-3182 Fax (626) 330-9406 www.centralblower.com CATALOG REF-11 OCTOBER 2011 Series RE Scoop with Grease Trough Sealed to blower
Table of contents 1. INTRODUCTION GENERAL CONTENTS OF PACKAGE GENERAL USE OF THE EQUFLOW 6100 D/A CONVERTER STORAGE..
Installation instructions and user s guide Equflow 6100 D/A Converter Please read this manual carefully before installation and use of the converter. 6100 D/A Converter Type: 6100DACONDC03 Despite effort
Any feature not specifically noted as supported is not supported.
Manufacturer: ELAN Integration Note Model Number(s): EL-4KM-VW44 (Device Ver 2.20; Web Module Ver 6.23) Minimum Core Module Version: Document Revision Date: 8.1.395 5/11/2017 OVERVIEW AND SUPPORTED FEATURES
UC1000 Universal Controller
UC1000 Universal Controller Makes the KING Quest Satellite Antenna System compatible with DIRECTV DISH Bell TV Please read the! BEFORE YOU START! section on the inside of this cover before using the UC1000
TELEDYNE HASTINGS INSTRUMENTS
DVT (Digital VT) DCVT (Digital CVT) www.teledyne-hi.com TELEDYNE HASTINGS INSTRUMENTS Vacuum Measurement RANGES DV-4 (0.1 20 Torr) DV-5 (0.1 100 mtorr) DV-6 (1 999 mtorr) FEATURES Linear Analog Output
SEQUENTIAL SHIFT LIGHT
SEQUENTIAL SHIFT LIGHT USER GUIDE AND INSTRUCTIONS JULY 06 CONTENTS INTRODUCTION PAGE INSTALLATION PAGE ENTER MODE PAGE SET LOWER RPM PAGE SET HIGHER RPM PAGE 5 COMPLETE PAGE 6 CONTACT INFORMATION Unit
Video 3 Input/Output Boards Users Manual And Troubleshooting Guide
Video 3 Input/Output Boards Users Manual And Troubleshooting Guide February 24, 2009 Rev. E Moog Components Group Springfield Operations 750 West Sproul Road Springfield, PA 19064 E-Mail: mcg@moog.com
IGNITION TRANSFORMER FOR BURNERS
IGNITION TRANSFORMER FOR BURNERS TAR SERIES FEATURES TAR10 Bulletin E5004 rev06 13/11/03 115 / 230 V 50 / 60 Hz 2 / 1 A 220 VA Intermittence every 3 minutes: 20% 1.3 kg 38 cm Type of H.T. cable siliconic
European Aviation Safety Agency
EASA.SAS.BA.013 PÉCS (TOMI) Series Page 1 / 23 European Aviation Safety Agency EASA SPECIFIC AIRWORTHINESS SPECIFICATION for PÉCS (MECSEK/TOMI) Series TOMI AX-6 TOMI AX-7 TOMI AX-8 TOMI AX-9 TOMI AX-10
4830A Accelerometer simulator Instruction manual. IM4830A, Revision E1
4830A Accelerometer simulator Instruction manual IM4830A, Revision E1 IM4830, Page 2 The ENDEVCO Model 4830A is a battery operated instrument that is used to electronically simulate a variety of outputs
OPERATING AND SAFETY INSTRUCTIONS for DIGITAL TEMPERATURE CONTROLS (PLSM SERIES)
user instructions 711 HULMAN STREET PO BOX 2128 TERRE HAUTE, IN 47802 812-235-6167 FAX 812-234-6975 OPERATING AND SAFETY INSTRUCTIONS for DIGITAL TEMPERATURE CONTROLS (PLSM SERIES) Models: 104A PLSM112;
Model 7600 HD/SD Embedder/ Disembedder Data Pack
Model 7600 HD/SD Embedder/ Disembedder Data Pack E NSEMBLE D E S I G N S Revision 2.1 SW v2.0.1 This data pack provides detailed installation, configuration and operation information for the 7600 HD/SD
General Digital-designed Dual LED Driver PCB POWER INPUT Input on power connector is specified to accept 9 16 Vdc, nominal 12 Vdc.
Dual LED Driver for LCDs OVERVIEW LED BACKLIGHT CONTROLLER FAMILY General Digital s Dual LED Driver PCB is a dual channel, boost-mode LED driver intended to drive Daylight and NVIS combo rails, or two
ORM0022 EHPC210 Universal Controller Operation Manual Revision 1. EHPC210 Universal Controller. Operation Manual
ORM0022 EHPC210 Universal Controller Operation Manual Revision 1 EHPC210 Universal Controller Operation Manual Associated Documentation... 4 Electrical Interface... 4 Power Supply... 4 Solenoid Outputs...
Design and Manufacture of Video Pipeline Inspection Systems A Full Service Company
Design and Manufacture of Video Pipeline Inspection Systems A Full Service Company www.rstechserv.com 1315 Controller OPERATIONS MANUAL Made in the USA Table Of Contents: Page 3 Page 5 Page 6 Page 7 Page
For applications from 0.25 to 5 HP, the MD60 is a simple AC Microdrive that can be panel mounted as well as wall or machine mounted.
For applications from 0.25 to 5 HP, the MD60 is a simple AC Microdrive that can be panel mounted as well as wall or machine mounted. N223 Reliance Electric s MD60 AC Drive is ready to operate out-of-the-box!
GWL/ Power Group Technology Solutions Stay Powered for the Future
GWL/ Power Group Technology Solutions Stay Powered for the Future BMS2405 CONNECTION GUIDE: This is simple step-by-step manual how to CONNECT AND proceed basic SETUP of BMS2405. In following example connection
As you know, the fuel level indications on your MFD
Information for the Evolution Owner and Builder Redmond OR; October 28, 2013 Correcting Fuel Gauge Mismatch As you know, the fuel level indications on your MFD come from two different sources. The conventional
Chapter 2: Scanner Operations NOTE: Install the software cartridge Power the Scanner Select the software title Identify the vehicle
Chapter 2: Scanner Operations This chapter explains general Scanner operations and offers instructions for customizing certain Scanner functions. The following is an outline of basic Scanner operation.
AS-80/AS-90 Scorers w/led Overheads
Pre-Installation/Installation Manual AS-80/AS-90 Scorers w/led Overheads October 2013 / 57-900714-000 AS-80/90 Scorers w/led Overheads Pre-Installation/Installation Manual October 2013 by the Brunswick
Ford AMS Test Bench Operating Instructions
THE FORD METER BOX COMPANY, INC. ISO 9001:2008 10002505 AMS Test Bench 09/2013 Ford AMS Test Bench Operating Instructions The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana,
PLC Control Unit for a CSM-E Electrical Compact Clean Steam Generator
3.635.5275.254 IM-P486-18 CH Issue 3 PLC Control Unit for a CSM-E Electrical Compact Clean Steam Generator Installation, Start-up and Operation Manual 1. Safety information 2. General product information
2 Any form of reproduction if this document, also electronic reproduction, such as placing it in the internet is not allowed.
2 GUIDE TO TUBE TESTER REPAIR AND CALIBRATION - INSTRUCTIONS, HINTS AND INFORMATION Jac van de Walle Last edited: 08.08.2013 All information here is to the best of our knowledge, but we take no reliability
Column Type Air Micrometer. CAG2000 Instruction Manual
Column Type Air Micrometer CAG2000 Instruction Manual Contents 1. Introduction 1 2. Main Features 1 3. Main Modes 2 4. Names and Functions of Controls and Parts 3 5. Specifications 8 6. Measurement 10
MP-7424 Football Scoreboard with MP5000 Console
MP-7424 Football Scoreboard with MP5000 Console With additional instructions for Track and Soccer Operator s Manual Volume VII Rev. 10/17/07 Table of Contents Table of Contents...2 1.0 Keypad Console...3
Film-Tech. The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment.
Film-Tech The information contained in this Adobe Acrobat pdf file is provided at your own risk and good judgment. These manuals are designed to facilitate the exchange of information related to cinema
Arduino Nixie Clock Classic Rev4 and Rev5 All In One
Arduino Nixie Clock Classic Rev4 and Rev5 All In One Operating Instructions Firmware V52 Supported Models: Classic Rev4 Classic Rev5 All-In-One NixieClockUserManualV52 About this document This is the user
PCR AUTOMATIC HEAT TREATMENT CONSOLE
Maritime Stress PO Box 2898, 30 Estates Road Dartmouth, NS, B2W 4Y2, Canada Toll Free: 1-877-468-1781 Phone: (902) 468-7873 Fax: (902) 468-2304 Website: E-mail: info@maritimestress.com OPERATION MANUAL
SAFETY RELATED MANDATORY MACHINE INSPECTION
P.O. Box 1160 St. Joseph, MO 64502-1160 Phone: (800) 255-0317 Fax: (785) 989-3075 Date: August 22, 2014 Rev: D Product Safety Bulletin PS-3087800 This Product Safety Bulletin must be read and understood
Advanced Digital Melting Point Apparatus
Advanced Digital Melting Point Apparatus User Guide Version 1.1 Figure 1: Front view Sample heating block Power on/off (at rear) Printer output (at rear) LCD screen Viewer Capillary storage Control panel
RV SATELLITE ANTENNA AUTOMATIC SKEW TWIN LNB SSA-850
RV SATELLITE ANTENNA AUTOMATIC SKEW TWIN LNB SSA-850 INSTALLATION AND OPERATION MANUAL Please ensure that this manual is read in full prior to installing or using this sphere satellite unit. Design and
Revision 1.0 Parts List Mini
Revision.0 www.grindex.com Parts List 822.2 Mini Table of Contents Table of Contents Introduction... 2 Specially approved products...2 Product Description...3 Products included... 3 The data plate...3
Instruction Manual. SMS 8601 NTSC/PAL to 270 Mb Decoder
Instruction Manual SMS 8601 NTSC/PAL to 270 Mb Decoder 071-0421-00 First Printing: November 1995 Revised Printing: November 1998 Contacting Tektronix Customer Support Product, Service, Sales Information
XTM72E & F Real-Time Clock Modules
Capricorn Controls Ltd Data & Application Notes Page 1 of 8 XTM72E & F Real-Time Clock Modules Originally designed to compliment our wide range of Gen-Set controls, these DC powered Real-Time-Clocks have
Part-Turn Electric Multi-Turn Electric
Optional 7 Handwheel Available NEMA 4 Enclosure Approvals MAR s Only (Canadian Standard Association) Enclosure NEMA 7 Enclosure Approvals MAR s Only (Canadian Standard Association) Class I, Divisions 1
Ford AMS Test Bench Operating Instructions
AMS Test Bench 09/2013 Ford AMS Test Bench Operating Instructions The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171 FAX: 800-826-3487
FD102CV. Installation and Operation Manual Widescreen LCD. Revision Date: 02/01/2012 Page 1 of 16. Rev: K. Document Number: MAN FD102CV
Page 1 of 16 Installation and Operation Manual FD102CV 10.2 Widescreen LCD Page 2 of 16 FD102CV 10.2 Widescreen LCD 2006 Flight Display Systems. Flight Display Systems 6435 Shiloh Road Alpharetta, GA 30005
AUTOMATIC TAPING MACHINE INSTRUCTION MANUAL TAIYO SEIKI CO., LTD.
- AUTOMATIC TAPING MACHINE INSTRUCTION MANUAL TAIYO SEIKI CO., LTD. 1 Contents CONTENTS 1. Introduction... 2 1-1. Important safety notice...2 1-2. Precautions for use and installation...2 1-3. Operating
Over 5000 VXI cards and mainframes in stock. 1000's of pieces of Test Equipment in stock. Looking for Test Equipment? Visit us on the web at www.recycledequipment.com Recycled Equipment buys, sells, and
INSTRUCTION MANUAL. J800 Weld Controller. 3/25/2018 Revision
INSTRUCTION MANUAL J800 Weld Controller 3/25/2018 Revision 1.1.1.1 THIS PAGE IS INTENTIONALLY LEFT BLANK ii INSTALLATION AND OPERATION Janda Company, Inc. J800 WELDING CONTROLLER TO END USERS: This Weld
Manual No: Revision: D. IQ Box. Software Upgrade Instructions
Manual No: 577013-834 Revision: D IQ Box Software Upgrade Instructions Notice Veeder-Root makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranties
4X1 Gefen TV Switcher. GTV-HDMI User Manual
4X1 Gefen TV Switcher GTV-HDMI1.3-441 User Manual www.gefentv.com ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to
Ambient NOx monitor APNA-370 Operation Manual CODE:GZ D
Ambient NOx monitor APNA-370 Operation Manual CODE:GZ9100497232D Preface This manual describes the operation of the Ambient NOx monitor, APNA-370. Be sure to read this manual before using the product to
VIVO-D203(M) Quick installation and programming guide. Elements of the complete installation
VIVO-D203(M) Quick installation and programming guide English WARNING This quick guide is a summary of the complete installation manual. The manual contains safety warnings and other explanations which
Software Manual Control Panel for Professional Single Booster Units Models: MM3 BW3
Software Manual Control Panel for Professional Single Booster Units Models: MM3 BW3 EN Software Manual.. 1-14 1 1. DESCRIPTION 3 2. DISPLAY LAYOUT 4 3. MODES 5 3.1 Power On 5 3.2 Standby 5 3.3 Power off
SERVICE DIRECTIVE BULLETIN
SERVICE DIRECTIVE BULLETIN DATE: November 7, 2017 SERVICE DIRECTIVE BULLETIN NO. 0116 Page 1 of 6 1. SUBJECT: Cyclic and Collective Control Tube Assembly Inspections 2. MODEL: F-28F, F-28F-R, 280FX and
SPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL (ANALOG RGB AND VIDEO INTERFACE CONTROLLER FOR VGA/SVGA/XGA RESOLUTION TFT-LCDs) MODEL NO : AP4300 SERIES BUYER S PARTNO: APPROVED REFERENCE (PLEASE RETURN ONE OF THESE TO US
21-Pin Connector. Dimensions: 1.28 x.69 x.22 or 32.5mm x 17.5mm x 5.6mm
Our Famous GOOF PROOF NO Questions Asked Warranty TM 21-Pin Connector Scale Functions Function Rating Continuous/Peak HO 8 100 ma 1.3 /2.0 Amp Dimensions: 1.28 x.69 x.22 or 32.5mm x 17.5mm x 5.6mm Main
Installation And Programming Guide
Installation And Programming Guide BISTRO 2 By NEWCO Enterprises Section 1 Installation Instructions Section 2 Set-Up Programming Instructions Section 3 Service Level Programming Instructions Section 1
multi-function meters
multi-function meters eclipse 2 eclipse 7 installation and operating manual 1 GENERAL DESCRIPTION 2 INSTALLATION 3 WIRING INFORMATION 4 2 ECLIPSE 2 METERS 2.1 PROGRAMMING THE METER 5 2.2 INFORMATION 6
CENTRIFAN IN-LINE CENTRIFUGAL FAN
CENTRIFAN IN-LINE CENTRIFUGAL FAN The Peerless Electric Centrifan represents the latest development in the fan and blower industry. Incorporating the tried and proven, highly efficient Peerless wheel in
The University of Texas at Austin September 30, 2011
SECTION 27 08 20 COPPER TESTING PART 1 - GENERAL 1.1 SUMMARY A. Test measurements shall be taken for all balanced-twisted pair cabling, including horizontal and backbone copper cables and wall-to-rack
6170 Shiloh Road Alpharetta, Georgia (770) FAX (770) Toll Free
Instruction Manual Model 2115-202 Upconverter November 2011, Rev. C MODEL 2115 UPCONVERTER CROSS TECHNOLOGIES INC. EXT 10MHZ ALARM POWER Data, drawings, and other material contained herein are proprietary
User Guide. Centrex Recording Interface
User Guide Centrex Recording Interface Table of Contents Introduction... 2 The Meridian Business Set... 3 Key Numbering Plan (18 button add-on)... 4 Key Numbering Plan (36 button add-on)... 5 Key Numbering
2. Pin assignment list for EXC-73 Signal conversion
PAGE:1/6 Dear valued customers, Regarding HELIOT series Signal Conversion Unit EXC-73 ULVAC Technologies, Inc. Component Division measurement instrument 1 department 1. Overview Note EXC-73 is a signal
24 Volt RGB/RGA Super Flat LED Rope Part Numbers: SFR-RGB-W, SFR-RGB-B, SFR-RGA-W, SFR-RGA-B
11235 West Bernardo Court, Suite 102 San Diego, CA 92127 888-880-1880 Fax: 707-281-0567 EnvironmentalLights.com 24 Volt RGB/RGA Super Flat LED Rope Part Numbers: SFR-RGB-W, SFR-RGB-B, SFR-RGA-W, SFR-RGA-B
U8 Timer. Owner s Manual MODEL NO. 2000U8. Model and serial number may be found at the rear of the feeder base.
Owner s Manual U8 Timer MODEL NO. 2000U8 Model and serial number may be found at the rear of the feeder base. Please record both model and serial number in a safe place for future use. Where Purchased
Setup Guide. AV Foundry VideoForge HDMI. Digital Video Generator. Rev. 1.1
Setup Guide AV Foundry VideoForge HDMI Digital Video Generator Rev. 1.1 Introduction The AV Foundry VideoForge HDMI Digital Video Generator is a versatile, high value test pattern generator with a field-ruggedized
Ku-Band Redundant LNB Systems. 1:1 System RF IN (WR75) TEST IN -40 db OFFLINE IN CONTROLLER. 1:2 System POL 1 IN (WR75) TEST IN -40 db POL 2 IN
BRK-1000 Series Ku-Band Redundant LNB Systems Introduction Redundant LNB systems minimize system downtime due to LNB failure by providing a spare LNB and an automatic means of switching to the spare upon
Hitachi Kokusai Electric Comark LLC
Hitachi Kokusai Electric Comark LLC TRANSMIT TER OF THE FUTURE Solid State. Broadband. Affordable. The future has arrived. With rapid changes in solid state RF device technologies and design techniques,
SPECIAL SPECIFICATION 8540 Telecommunication Cable
2004 Specifications CSJ 0914-00-307 & CSJ 0914-25-003 SPECIAL SPECIFICATION 8540 Telecommunication Cable 1. Description. This specification governs the materials, installation, termination, splicing, testing,
Ambient SO 2 /H 2 S monitor APSA-H370 Instruction Manual
Ambient SO 2 /H 2 S monitor APSA-H370 Instruction Manual Preface This instruction manual describes the operation of the Ambient SO 2 /H 2 S monitor, APSA-H370. Be sure to read this manual before using
NAVSEA STANDARD ITEM. 1.1 Title: Fiber Optic Component; remove, relocate, repair, and install
NAVSEA STANDARD ITEM ITEM NO: 009-123 DATE: 18 NOV 2016 CATEGORY: II 1. SCOPE: 1.1 Title: Fiber Optic Component; remove, relocate, repair, and install 2. REFERENCES: 2.1 Standard Items 2.2 MIL-STD-1678,
REPORT issued by an Accredited Testing Laboratory
issued by an Accredited Testing Laboratory Contact person Fredrik Öberg 2017-04-25 7P02435 1 (7) Building Technology +46 10 516 56 06 fredrik.oberg@ri.se Essve Produkter AB Fredrik Sivertsson Box 7091