DLP Projector. User manual

Size: px

Start display at page:

Download "DLP Projector. User manual"

Jonas Washington
5 years ago
Views:

1 DLP Projector User manual

2 TABLE OF CONTENTS SAFETY... 3 Important Safety Instruction... 3 Copyright... 4 Disclaimer... 4 Trademark Recognition... 4 FCC... 5 Declaration of Conformity for EU countries... 5 WEEE... 5 INTRODUCTION... 6 Package Overview... 6 Standard accessories... 6 Optional accessories... 6 Product Overview... 7 Connections... 8 Keypad... 8 SETUP AND INSTALLATION... 9 Connecting sources to the projector... 9 Focus USING THE PROJECTOR Powering on / off the projector Menu navigation and features OSD Menu tree ADDITIONAL INFORMATION Compatible resolutions Image size and projection distance Troubleshooting LED lightning messages Specifications Optoma global offices English

3 SAFETY The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Please follow all warnings, precautions and maintenance as recommended in this user's guide. Important Safety Instruction RG1 IEC :2015. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from over heating, it is recommended to install the projector in a location that does not block ventilation. As an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a cabinet that restricts air flow. To reduce the risk of fire and/or electric shock, do not expose the projector to rain or moisture. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers that emits heat. Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short out parts that could result in fire or electric shock. Do not use under the following conditions: ± ± In extremely hot, cold or humid environments. (i) Ensure that the ambient room temperature is within 5 C ~ 40 C (ii) Relative humidity is 10% ~ 80% ± ± In areas susceptible to excessive dust and dirt. ± ± Near any appliance generating a strong magnetic field. ± ± In direct sunlight. Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be (but not limited to): ± ± Unit has been dropped. ± ± Power supply cord or plug has been damaged. ± ± Liquid has been spilled on to the projector. ± ± Projector has been exposed to rain or moisture. ± ± Something has fallen in the projector or something is loose inside. Do not place the projector on an unstable surface. The projector may fall over resulting in injury or the projector may become damaged. Do not block the light coming out of the projector lens when in operation. The light will heat the object and could melt, cause burns or start a fire. Please do not open or disassemble the projector as this may cause electric shock. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair. See projector enclosure for safety related markings. The unit should only be repaired by appropriate service personnel. Only use attachments/accessories specified by the manufacturer. English 3

4 Do not look into straight into the projector lens during operation. The bright light may harm your eyes. When switching the projector off, please ensure the cooling cycle has been completed before disconnecting power. Allow 90 seconds for the projector to cool down. Turn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Do not use abrasive cleaners, waxes or solvents to clean the unit. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not setup the projector in places where it might be subjected to vibration or shock. Do not touch the lens with bare hands. Do not use or store the projector in places where smoke from oil or cigarettes may be present, as it can adversely affect the quality of the projector performance. Please follow the correct projector orientation installation as non standard installation may affect the projector performance. Use a power strip and or surge protector. As power outages and brown-outs can KILL devices. Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Copyright 2018 Disclaimer The information in this document is subject to change without notice. The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes. Trademark Recognition Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations and pending applications in other countries throughout the world. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. DLP, DLP Link and the DLP logo are registered trademarks of Texas Instruments and BrilliantColor TM is a trademark of Texas Instruments. Manufactured under license from Dolby Laboratories. Dolby and the double-d symbol are trademarks of Dolby Laboratories. All other product names used in this manual are the properties of their respective owners and are Acknowledged. 4 English

5 FCC This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Caution Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this projector. Operation Conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Remarque à l'intention des utilisateurs canadiens Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries EMC Directive 2014/30/EC (including amendments) Low Voltage Directive 2014/35/EC R & TTE Directive 1999/5/EC (if product has RF function) WEEE Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. English 5

6 INTRODUCTION Package Overview Carefully unpack and verify that you have the items listed below under standard accessories. Some of the items under optional accessories may not be available depending on the model, specification and your region of purchase. Please check with your place of purchase. Some accessories may vary from region to region. The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information. Standard accessories Warranty Card* Basic User Manual Projector Power adapter Documentation Note: *For European warranty information, please visit Optional accessories HDMI cable Power plug for UK Power plug for US Power plug for EU (except UK) Note: Optional accessories vary depending on model, specification and region. 6 English

7 INTRODUCTION Product Overview Note: Do not block projector intake and exhaust vents. When operating the projector in an enclosed space, allow at least 20cm clearance around the intake and exhaust vents. No Item No Item 1. Keypad 4. Ventilation (outlet) 2. Ventilation (inlet) 5. Focus Wheel 3. Input / Output 6. Lens English 7

8 INTRODUCTION Connections No Item No Item 1. Headphone Connector 3. USB Connector (5V 1A) 2. HDMI / MHL Connector 4. DC IN Connector Keypad Top View 1 5 Rear View No Item No Item 1. Menu 4. Mode Selection* 1 2. LED Indicator 5. Four Directional Select Keys* 2 3. Power Button Note: * 1 Press the key in a sequence to toggle through the display modes while the OSD menu is on. * 2 Press the tu key to decrease or increase the internal speaker/headphone volume respectively while the OSD menu is off. 8 English

9 MOLEX SETUP AND INSTALLATION Connecting sources to the projector No Item No Item 1. Audio Out Cable 5. Power Adapter 2. HDMI Cable 6. USB Power Supply (5V 1A) 3. MHL Cable 7. HDMI Dongle 4. USB Cable Note: If you charge the battery using a USB cable and display an HDMI source with an audio output simultaneously, the cooling fan speed may increase. English 9

10 SETUP AND INSTALLATION Focus To adjust the focus, turn the focus wheel clockwise or counterclockwise until the image is sharp and legible. Focus Wheel Note: The projector will focus at a distance of 0.6m to 1.9m. 10 English

11 USING THE PROJECTOR Powering on / off the projector Powering on Note: Before powering on the projector for the first time, you need to fully charge the battery. 1. Attach the correct power plug that is supported in your region to the power adapter. 2. Connect one end of the power adapter to the DC IN connector on the projector. 3. Connect the other end of the power adapter to the electrical outlet. When connected, the LED indicator will turn red and the battery starts charging. Wait until the LED indicator will turn blue which means the battery is fully charged. More information on LED colors, refer to page Connect the signal/source cable. 5. Long press (> 1s) the Power button on the rear panel of the projector. LED Indicator Power Button The first time the projector is powered on, you will be prompted to select a preferred OSD language. Press the tu keys to select your preferred language. Language Language Language Language English Note: Short press (< 1s) the Power button to turn on or turn off the power bank while running on battery mode (power adapter is unplugged). In active mode (the projector is powered on), the power output through the MHL connector and USB connector simultaneously is not supported. The MHL connector has higher priority, meaning the power output from the USB connector will be cut off. English 11

USING THE PROJECTOR Powering off 1. Turn off the projector by pressing the Power button on the rear panel. The following message will be displayed: Power off? Press power key again. 2.

12 USING THE PROJECTOR Powering off 1. Turn off the projector by pressing the Power button on the rear panel. The following message will be displayed: Power off? Press power key again. 2. Press the Power button again. 3. Disconnect the power adapter from the projector and the electrical outlet. Note: It is not recommended that the projector is turned on immediately, right after a power off procedure. Menu navigation and features The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. 1. To open the OSD menu, press the key on the projector keypad. 2. When the OSD is displayed, press the tu keys to select any item in the Main Menu. While making a selection on a particular tab, press the pq keys to select sub menu items. 3. Press the tu keys to select the setting or adjust a value. 4. To exit, press the key again. The OSD menu will close and the projector will automatically save the new settings. Main Menu Sub Menu Language Language Settings English 12 English

13 USING THE PROJECTOR OSD Menu tree Level 1 Level 2 Level 3 Default Value Bright Display Mode Standard Standard Eco Brightness 0~10 5 Contrast 0~10 5 Display Projection Aspect Ratio Auto Keystone Keystone Front Rear Front Front-Ceiling Rear-Ceiling Auto 4:3 Auto 16:9 On On Off Manual Keystone -40~40 0 V Keystone -40~40 0 Volume 0~10 5 Software Version Read only Information Input Source Read only Signal Type Read only English English Language Deutsch Español Français Italiano Português Русский 日本語中文 ( 繁 ) 한국어 Setting Logo Default Neutral Default Reset No Yes No English 13

USING THE PROJECTOR Display menu Display Display mode Brightness Display mode There are many factory presets optimized for various types of images.

14 USING THE PROJECTOR Display menu Display Display mode Brightness Display mode There are many factory presets optimized for various types of images. Bright: Choose this mode for brighter and more saturated colors. Standard: Choose this mode for natural looking colors with a balance of warm and cool tones. Eco: Choose this mode to dim the projector light source which will lower power consumption and extend the light source life. Brightness Adjust the brightness of the image. Contrast Adjust the contrast of the image. Projection Specify the orientation to use for the image. Aspect ratio Select the aspect ratio of the displayed image. Auto: Automatically selects the appropriate display format. 4:3: This format is for 4:3 input sources. 16:9: This format is for 16:9 input sources, like HDTV and DVD enhanced for Wide screen TV. Keystone menu Note: A 16:9 image is scaled down automatically to the size 1280x720. Keystone Auto Keystone Manual Keystone Auto Keystone Correct keystone digitally to fit the projected image on the area on which you are projecting. Manual Keystone Correct keystone manually to fit the projected image on the area on which you are projecting. 14 English

15 USING THE PROJECTOR V Keystone Adjust image distortion vertically and make a squarer image. Vertical keystone is used to correct a keystoned image shape in which the top and bottom are slanted to one of the sides. This is intended when for use with vertically on-axis applications. Volume menu Volume Volume Volume Adjust the audio volume level. Information menu Information Software Version Input Source Signal Type Information Review software version, current input source, and signal type. Language menu Language Language Language Select the multilingual OSD menu between English, German, Spanish, French, Italian, Portuguese, Russian, Japanese, Traditional Chinese, and Korean. English 15

16 USING THE PROJECTOR Setting menu Setting Reset Logo Select the logo that is displayed when no signal is available. Reset Return the factory default settings for all settings. 16 English

17 ADDITIONAL INFORMATION Compatible resolutions HDMI - PC Signal Mode Resolution Refresh Rate (Hz) Notes for Mac VGA 640x SVGA 800x XGA 1024x x SXGA+ 1400x UXGA 1600x PowerBook G4 640x PowerBook G4 800x PowerBook G4 1024x HDMI - Extended Wide Timing Mode Resolution Refresh Rate (Hz) Notes for Mac 1280x x WSXGA+ 1280x x x1080 (1080P) x HDMI - Video Signal Mode Resolution Refresh Rate (Hz) Notes for Mac 480i 720(1440)x480 16: (29.97) i 720x576 (1440x576) 16:9 50(25) p 720x480 16: p 720x576 16: p 1280x p 1280x i 1920x (30) i 1920x (25) p 1920x / p 1920x p 1920x p 1920x p 1920x Note: I-frame will slightly jitter due to the chip limitation. English 17

18 ADDITIONAL INFORMATION MHL Digital Mode Resolution Refresh Rate (Hz) Notes for Mac VGA 640x / i 720x480(1440x480) 59.94/ i 720x576(1440x576) 50(25) p 720x / p 720x p 1280x / p 1280x i 1920x (30) i 1920x (25) p 1920x / p 1920x p 1920x / Image size and projection distance Screen Size W x H Projection Distance (D) Diagonal Length Offset (Hd) (m) (inch) (m) (feet) Size of (16:9) Screen Width Height Width Height Wide Tele Wide Tele (m) (inch) Note: Zoom ratio: N/A W H H cm D 18 English

19 ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the "Installation" section. Ensure the pins of connectors are not crooked or broken. Ensure that the volume is not set to 0. Image is out of focus Adjust the focus using the focus wheel. Please refer to page 10. Make sure the projection screen is between the required distance from the projector. Please refer to page 18. The image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:9 DVD, the projector will show the best image in 16: 9 format on projector side. If you play 4:3 format DVD title, please change the format as 4:3 in projector OSD. Please setup the display format as 16:9 (wide) aspect ratio type on your DVD player. Image is too small or too large Move the projector closer to or further from the screen. Press the key on the projector panel, go to Display > Aspect Ratio. Try the different settings. Image has slanted sides: If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. Use Keystone > Auto Keystone or Manual Keystone from the OSD to make an adjustment. Image is reversed Select Display > Projection from the OSD and adjust the projection direction. Other problems The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power. English 19

20 ADDITIONAL INFORMATION LED lightning messages Message Power LED Indicator Battery Color Blue Red Green Orange Red Battery Charging Battery Charging is Complete Battery Capacity 70%~100% Battery Capacity 40%~70% Battery Capacity 5%~40% Battery Level <5%* 1 Fan Failure* 2 Projector has Overheated* 2 Battery has Overheated* 3 Note: On On On On Flashing (0.5 sec on / 0.5 sec off) On Flashing for 10 sec (0.5 sec on / 0.5 sec off) Flashing for 30 sec (1 sec on / 0.5 sec off) Flashing for 30 sec (0.5 sec on / 1 sec off) *1: The projector will automatically shut down after the event. *2: The projector will automatically shut down before the event. *3: The LED indicator keeps flashing until the battery temperature becomes normal. Warning messages Power off: Power off? Press power key again. No signal warning: No Signal Found 20 English

21 ADDITIONAL INFORMATION Specifications Optical Native resolution Lens Image size (diagonal) Projection distance Description FWVGA 854x480 Fixed focus - Mechanical range: 15 ~150 - Optical range: 25 ~80, optimized at 40 - Mechanical range: 0.36m~3.66m - Optical range: 0.6m~1.9m Electrical Description Inputs - HDMI v1.4b, MHL v.2.2, HDCP - USB DC 5V 1A Outputs - Headphone jack Scan rate - Horizontal scan rate: 15~75 KHz - Vertical scan rate: 24~60 Hz Built-in speaker 1.5W mono speakers Power requirement AC adapter, input V, AC 50/60Hz, output 19V DC (to projector) Input current DC in 2.1A Mechanical Installation orientation Dimensions (W x D x H) Weight Environmental conditions Description Front, Rear, Front-Ceiling, Rear-Ceiling 108 x x 35.5 mm 0.4 kg Operating in 5~40 C, 10% to 80% humidity (non-condensing) Note: All specifications are subject to change without notice. English 21

22 ADDITIONAL INFORMATION Optoma global offices For service or support, please contact your local office. USA 3178 Laurelview Ct Fremont, CA 94538, USA Canada 3178 Laurelview Ct Fremont, CA 94538, USA Latin America 3178 Laurelview Ct Fremont, CA 94538, USA Europe Unit 1, Network 41, Bourne End Mills, Hemel Hempstead, Herts, HP1 2UJ, United Kingdom +44 (0) (0) Service Tel : +44 (0) service@tsc-europe.com Benelux BV Randstad (0) BW Almere +31 (0) The Netherlands France Bâtiment E avenue Edouard Vaillant Boulogne Billancourt, France savoptoma@optoma.fr Spain C/ José Hierro,36 Of. 1C Rivas VaciaMadrid, Spain Deutschland Wiesenstrasse 21 W +49 (0) D40549 Düsseldorf, +49 (0) Germany info@optoma.de Scandinavia Lerpeveien Drammen Norway info@optoma.no PO.BOX Drammen Norway Japan 東京都足立区綾瀬株式会社オーエスコンタクトセンター : info@os-worldwide.com Taiwan 12F., No.213, Sec. 3, Beixin Rd., Xindian Dist., New Taipei City 231, Taiwan, R.O.C. services@optoma.com.tw asia.optoma.com Hong Kong Unit A, 27/F Dragon Centre, 79 Wing Hong Street, Cheung Sha Wan, Kowloon, Hong Kong China 5F, No. 1205, Kaixuan Rd., Changning District Shanghai, , China Korea WOOMI TECH.CO.,LTD F, Minu Bldg.33-14, Kangnam-Ku, Seoul, , KOREA korea.optoma.com 22 English

4K Cropping Box. User manual

4K Cropping Box. User manual 4K Cropping Box User manual Table of Contents 1 INTRODUCTION...3 2 FEATURES...3 3 SPECIFICATIONS...4 3.1 CS200T Main Box Specification...4 3.2 CS200T Module & Model List...5 4 CONNECTION DIAGRAM...7 5