(1) LCD Digital Color TV. Operating Instructions KDL-40V2500 KDL-46V Sony Corporation

Transcription

1 (1) LCD Digital Color TV Operating Intruction KDL-40V2500 KDL-46V Sony Corporation

2 Owner Record The model and erial number are located at the rear of the TV. Record thee number in the pace provided below. Refer to them whenever you call upon your Sony dealer regarding thi product. Model No. Serial No. Pleae contact Sony directly if you: z z For Your Convenience Have quetion on the ue of your televiion after reading your manual Experience difficulty operating your televiion Contact Sony Cutomer Support at: or to peak with a upport repreentative: United State SONY (7669) 8:00 AM - 10:00 PM (EST) Mon - Fri 10:30 AM - 7:15 PM (EST) Sat - Sun Canada SONY (7669) 8:00 AM - 6:00 PM (Eatern) 8:00 AM - 5:00 PM (Wetern) Sony will work to reolve your quetion more quickly than your retailer or place of purchae. Pleae Do Not Return the Product to the Store 2

3 WARNING To reduce the rik of fire or electric hock, do not expoe thi apparatu to rain or moiture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR Thi ymbol i intended to alert the uer to the preence of uninulated dangerou voltage within the product encloure that may be of ufficient magnitude to contitute a rik of electric hock to peron. Thi ymbol i intended to alert the uer to the preence of important operating and maintenance (ervicing) intruction in the literature accompanying the appliance. The apparatu hall not be expoed to dripping or plahing and no object filled with liquid, uch a vae, hall be placed on the apparatu. CAUTION To prevent electric hock, do not ue thi polarized AC plug with an extenion cord, receptacle or other outlet unle the blade can be fully inerted to prevent blade expoure. Note on Caption Viion Thi TV provide diplay of TV cloed captioning in accordance with of the FCC rule. Declaration of Conformity Trade Name: SONY Model: KDL-40V2500/KDL-46V2500 Reponible Party: Sony Electronic Inc. Addre: Via Eprillo San Diego, CA U.S.A. Telephone Number: Thi device complie with part 15 of the FCC rule. Operation i ubject to the following two condition: (1) Thi device may not caue harmful interference, and (2) thi device mut accept any interference received, including interference that may caue undeired operation. NOTIFICATION Thi equipment ha been teted and found to comply with the limit for a Cla B digital device, puruant to Part 15 of the FCC Rule. Thee limit are deigned to provide reaonable protection againt harmful interference in a reidential intallation. Thi equipment generate, ue and can radiate radio frequency energy and, if not intalled and ued in accordance with the intruction, may caue harmful interference to radio communication. However, there i no guarantee that interference will not occur in a particular intallation. If thi equipment doe caue harmful interference to radio or televiion reception, which can be determined by turning the equipment off and on, the uer i encouraged to try to correct the interference by one or more of the following meaure: Reorient or relocate the receiving antenna. Increae the eparation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver i connected. Conult the dealer or an experienced radio/tv technician for help. For Cutomer in Canada Thi Cla B digital apparatu complie with Canadian ICES-003. Safety Operate the TV only on V AC. Ue the AC power cord pecified by Sony and uitable for the voltage where you ue it. The plug i deigned, for afety purpoe, to fit into the wall outlet only one way. If you are unable to inert the plug fully into the outlet, contact your dealer. If any liquid or olid object hould fall inide the cabinet, unplug the TV immediately and have it checked by qualified ervice peronnel before operating it further. If you will not be uing the TV for everal day, diconnect the power by pulling the plug itelf. Never pull on the cord. For detail concerning afety precaution, ee Important Safety Intruction on page 4. Intalling Puruant to FCC regulation, you are cautioned that any change or modification not exprely approved in thi manual could void your authority to operate thi equipment. The TV hould be intalled near an eaily acceible power outlet. To prevent internal heat buildup, do not block the ventilation opening. Do not intall the TV in a hot or humid place, or in a place ubject to exceive dut or mechanical vibration. Avoid operating the TV at temperature below 41 F (5 C). If the TV i tranported directly from a cold to a warm location, or if the room temperature change uddenly, the picture may be blurred or how poor color due to moiture condenation. In thi cae, pleae wait a few hour to let the moiture evaporate before turning on the TV. To obtain the bet picture, do not expoe the creen to direct illumination or direct unlight. It i recommended to ue pot lighting directed down from the ceiling or to cover the window that face the creen with opaque drapery. It i deirable to intall the TV in a room where the floor and wall are not of a reflective material. CAUTION Ue the following Sony appliance() only with the following WALL-MOUNT BRACKET. Sony Wall-Mount Bracket Model No. Sony Appliance Model No. KDL-40V2500 KDL-46V2500 SU-WL51 Ue with other WALL-MOUNT BRACKET may caue intability and poibly reult in injury. To Cutomer Sufficient expertie i required for intalling the pecified product. Be ure to ubcontract the intallation to Sony dealer or licened contractor and pay adequate attention to afety during the intallation. For Cutomer in the United State Thi product contain mercury. Dipoal of thi product may be regulated if old in the United State. For dipoal or recycling information, pleae contact your local authoritie or the Electronic Indutrie Alliance ( Note Thi televiion include a QAM demodulator which hould allow you to receive uncrambled digital cable televiion programming via ubcription ervice to a cable ervice provider. Availability of digital cable televiion programming in your area depend on the type of programming and ignal provided by your cable ervice provider. (Continued) 3

4 Trademark Information TruSurround XT, SRS and ( ) ymbol are trademark of SRS Lab, Inc. TruSurround XT technology i incorporated under licene from SRS Lab, Inc. Manufactured under licene from BBE Sound, Inc. Licened by BBE Sound, Inc. under one or more of the following US patent: , BBE and BBE ymbol are regitered trademark of BBE Sound, Inc. Macintoh i a trademark licened to Apple Computer, Inc., regitered in the U.S.A and other countrie. BRAVIA and are trademark of Sony Corporation. Thi TV incorporate High-Definition Multimedia Interface (HDMI ) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademark or regitered trademark of HDMI Licening LLC. Manufactured under licene from Dolby Laboratorie. Dolby and the double-d ymbol are trademark of Dolby Laboratorie. Important Safety Intruction 1) Read thee intruction. 2) Keep thee intruction. 3) Heed all warning. 4) Follow all intruction. 5) Do not ue thi apparatu near water. 6) Clean only with dry cloth. 7) Do not block any ventilation opening. Intall in accordance with the manufacturer intruction. 8) Do not intall near any heat ource uch a radiator, heat regiter, tove, or other apparatu (including amplifier) that produce heat. 9) Do not defeat the afety purpoe of the polarized or grounding-type plug. A polarized plug ha two blade with one wider than the other. A grounding type plug ha two blade and a third grounding prong. The wide blade or the third prong are provided for your afety. If the provided plug doe not fit into your outlet, conult an electrician for replacement of the obolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plug, convenience receptacle, and the point where they exit from the apparatu. 11) Only ue attachment/acceorie pecified by the manufacturer. 12) Ue only with the cart, tand, tripod, bracket, or table pecified by the manufacturer, or old with the apparatu. When a cart i ued, ue caution when moving the cart/apparatu combination to avoid injury from tip-over. 13) Unplug thi apparatu during lightning torm or when unued for long period of time. 14) Refer all ervicing to qualified ervice peronnel. Servicing i required when the apparatu ha been damaged in any way, uch a power-upply cord or plug i damaged, liquid ha been pilled or object have fallen into the apparatu, the apparatu ha been expoed to rain or moiture, doe not operate normally, or ha been dropped. 4

5 USE For the TV with a three-wire grounding type AC power cord plug (Cla 1 unit) Thi TV mut be connected to an AC power ocket outlet with a protective earthing connection. AC power cord If you damage the AC power cord, it may reult in a fire or an electric hock. If the AC power cord i damaged, top uing it and ak your dealer or Sony ervice center to exchange it. Do not place the TV where the power cord i ubject to wear or abue. Do not pinch, bend, or twit the cord exceively. The core line may be bared and cut, and caue a hort-circuit, reulting in a fire or an electric hock. Do not convert or damage the power cord. Do not allow anything to ret on or roll over the power cord. Do not pull the power cord. Do not move the TV with the power cord plugged in. Keep the power cord away from heat ource. Be ure to grap the plug when diconnecting the power cord. Wall outlet Do not ue a poor fitting outlet. Inert the plug fully into the outlet. If it i looe, it may caue arcing and reult in a fire. Contact your electrician to have the outlet changed. Wiring For your afety, unplug the AC power cord when wiring cable. Cable wiring Take care not to catch your feet on the cable. It may damage the TV. Electric hock Do not touch the AC power cord or the TV with a wet hand. If you plug/unplug the AC power cord from the TV with a wet hand, it may caue electric hock. Lightning For added protection for thi TV during a lightning torm, or when it i left unattended and unued for long period of time, unplug it from the wall outlet and diconnect the antenna. Thi will prevent damage to the receiver due to lightning and power line urge. ANTENNA Outdoor Antenna Grounding If an outdoor antenna i intalled, follow the precaution below. An outdoor antenna ytem hould not be located in the vicinity of overhead power line or other electric light or power circuit, or where it can come in contact with uch power line or circuit. WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL. Be ure the antenna ytem i grounded o a to provide ome protection againt voltage urge and built-up tatic charge. Section 810 of the National Electrical Code (NEC) in the USA and Section 54 of the Canadian Electrical Code in Canada provide information with repect to proper grounding of the mat and upporting tructure, grounding of the lead-in wire to an antenna dicharge unit, ize of grounding conductor, location of antenna dicharge unit, connection to grounding electrode, and requirement for the grounding electrode. Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70 BATTERIES Do not dipoe of batterie in a fire. Do not hort circuit, diaemble or overheat the batterie. Danger of exploion if battery i incorrectly replaced. Replace only with the ame or equivalent type. Dipoal of ued batterie To preerve our environment, dipoe of ued batterie according to your local law or regulation. CLEANING Electric ervice equipment Ground clamp NEC: National Electrical Code Clean the AC power plug regularly. If the plug i covered with dut and it pick up moiture, it inulation may deteriorate and reult in a fire. Unplug the AC power plug and clean it regularly. Unplug the AC power cord when cleaning thi TV. If not, it may reult in electric hock. Clean the cabinet of the TV with a dry oft cloth. To remove dut from the creen, wipe it gently with a oft cloth. Stubborn tain may be removed with a cloth lightly dampened with a olution of mild oap and warm water. Never ue trong olvent uch a thinner or benzine for cleaning. If uing a chemically pretreated cloth, pleae follow the intruction provided on the package. MAGNETIC INFLUENCE Thi TV contain a trong magnet in the peaker unit that generate a magnetic field. Keep any item uceptible to magnetic field away from the peaker. SOUND If a napping or popping ound from the TV i continuou or frequent while the TV i operating, unplug the TV and conult your dealer or ervice technician. It i normal for ome TV to make occaional napping or popping ound, particularly when being turned on or off. Antenna lead-in wire Antenna dicharge unit (NEC Section ) Grounding conductor (NEC Section ) Ground clamp Power ervice grounding electrode ytem (NEC Art 250 Part H) (Continued) 5

6 VENTILATION The lot and opening in the TV are provided for neceary ventilation. To enure reliable operation of the TV, and to protect it from overheating, thee lot and opening mut never be blocked or covered. Unle proper ventilation i provided, the TV may gather dut and get dirty. For proper ventilation, oberve the following: Do not intall the TV face up or down or ideway. Do not intall the TV turned over or upide down. Never cover the lot and opening with a cloth or other material. Never block the lot and opening by placing the TV on a bed, ofa, rug or other imilar urface. Never place the TV in a confined pace, uch a a bookcae or built-in cabinet, unle proper ventilation i provided. Object and ventilation hole Never puh object of any kind into the TV through the cabinet lot a they may touch dangerou voltage point or hort out part that could reult in a fire or an electric hock. Never pill liquid of any kind on the TV. Do not place any object on the TV. The TV hall not be expoed to dripping or plahing and no object filled with liquid, uch a vae, hall be placed on the TV. MOISTURE Moiture and flammable object Do not ue power-line operated et near water for example, near a bathtub, wahbowl, kitchen ink, or laundry tub, in a wet baement, or near a wimming pool, etc. It may reult in a fire or an electric hock. Do not let thi TV get wet. Never pill liquid of any kind on the TV. If any liquid or olid object doe fall through, do not operate the TV. It may reult in electric hock or damage to the TV. Have it checked immediately by qualified peronnel. To prevent fire, keep flammable object or open flame (e.g. candle) away from the TV. When intalling the TV on a wall, allow thi much pace: 10 cm (4 inche) 10 cm (4 inche) 30 cm (11 7 / 8 inche) 10 cm (4 inche) When intalling the TV uing a tand, allow thi much pace: 30 cm (11 7 / 8 inche) 10 cm (4 inche) 10 cm (4 inche) 6 cm (2 3 / 8 inche) CARRYING THE TV Carry the TV in the pecified manner Carrying the TV require at leat two people. If you carry the TV in a manner other than that pecified and without the pecified number of peron, it may drop and eriou injury may reult. Carry the TV with the pecified number of people. Carry the TV holding the upper and bottom frame of the TV a illutrated. Hold the TV ecurely when carrying it. A the gla urface of the TV ha a pecial coating, be careful to avoid touching the gla urface a much a poible. When tranporting, do not ubject the TV to hock or vibration, or exceive force. When lifting or moving the TV, be ure to hold the panel firmly a illutrated. Place your palm directly under the panel, from the rear of the TV. Leave at leat thi much pace. Never intall the TV a follow: Air circulation i blocked. Air circulation i blocked. 6

7 INSTALLATION When intalling or removing, uing the Wall-Mount Bracket, be ure to ue qualified contractor. Wall mount intallation require the ue of a Wall-Mount Bracket. If not properly ecured during intallation or removal from the Wall-Mount Bracket, the TV may fall and caue eriou injury. Pleae ue a qualified contractor when intalling or removing. Placement for viewing It i recommended to watch the TV at a ditance of 3-7 time that of the creen height, and in moderate brightne. Watching the TV for too long or in a dark room may caue eye fatigue. Optional wall mount Oberve the following when intalling the TV uing a wall-mount bracket. If the TV i not ecured properly, it may fall and caue injury. Be ure to follow the operating intruction upplied with the wall-mount bracket when intalling the TV. Be ure to attach the bracket upplied with the wall-mount bracket. Do not hang the TV from the ceiling. It may fall and caue eriou injury. Outdoor ue Do not intall thi TV outdoor. If the TV i expoed to rain, it may reult in a fire or an electric hock. If the TV i expoed to direct unlight, the TV may heat up and caue damage to the TV. Vehicle Do not intall thi TV in a vehicle. Bumping of the vehicle may caue the TV to fall down and caue injury. Ship and veel Do not intall thi TV in a hip or veel. If the TV i expoed to eawater, it may caue a fire or damage the TV. Corroion If you ue thi TV near the eahore, alt may corrode metal part of the TV and caue internal damage or fire. It may alo horten the life of the TV. Oil Do not intall thi TV in retaurant where oily vapor occur. Dut aborbing oil may enter and damage the TV. Medical intitution Do not place thi TV in a place where medical equipment i in ue. It may caue a malfunction of medical intrument. Placing on a table urface If you place the TV on an untable urface, the TV may fall and caue injury or damage. Fall Do not hang anything on the TV. The TV may fall from the tand or wall-mount, cauing damage or eriou injury. VOLUME ADJUSTMENT Adjut the volume o a not to trouble your neighbor. Sound carrie very eaily at night. Therefore, cloing the window or uing headphone i uggeted. When uing headphone, adjut the volume o a to avoid exceive level, a hearing damage may reult. LCD SCREEN Although the LCD creen i made with high-preciion technology and ha effective pixel of 99.99% or more, black dot or bright point of light (red, blue, or green) may appear contantly on the LCD creen. Thi i a tructural property of the LCD panel and i not a malfunction. Do not expoe the LCD creen urface to direct un light. Doing o may damage the LCD panel. Do not puh or cratch the LCD creen, or place object on top of the TV. The image may be uneven or the LCD panel may be damaged. If the TV i ued in a cold place, a mear may occur in the picture or the picture may become dark. Thi doe not indicate a failure. Thee phenomenon improve a the temperature rie. Ghoting may occur when till picture are diplayed continuouly. It hould diappear after a few moment. The creen and cabinet get warm when the TV i in ue. Thi i not a malfunction. Avoid praying inect repellent with volatile material on the creen. Avoid prolonged contact with rubber or platic made material. Broken piece Do not throw anything at the TV. The creen gla may break by the impact and caue eriou injury. Handling of broken gla and liquid crytal leakage If the LCD panel get damaged, crytalline liquid leakage may occur, or cattered broken gla may reult. Do not touch broken gla or crytalline liquid (which i toxic), with bare hand a cut or poioning/kin irritation may occur. Alo, do not let gla fragment or leaked crytalline liquid get into your eye or mouth. Should either contact your eye or mouth, rine the contacted area thoroughly with water and conult your doctor. Preventing the TV from toppling over Take meaure to prevent the TV from toppling over and cauing injury. To prevent the TV from toppling over, ecure the TV to a wall or pillar. Intalling on a level urface If you intall the TV on an inclined urface, the TV may fall or drop and caue injury or damage. (Continued) 7

8 SERVICING Damage requiring ervice If the urface of the TV crack, do not touch the TV until you unplug the AC power cord. Otherwie electric hock may reult. Servicing Do not attempt to ervice the TV yourelf ince opening the cabinet may expoe you to dangerou voltage or other hazard. Refer all ervicing to qualified ervice peronnel. Replacement part When replacement part are required, be ure the ervice technician certifie in writing that he/he ha ued replacement part pecified by the manufacturer that have the ame characteritic a the original part. Unauthorized ubtitution may reult in a fire, an electric hock or other hazard. Safety check Upon completion of any ervice or repair to the TV, ak the ervice technician to perform routine afety check (a pecified by the manufacturer) to determine that the TV i in afe operating condition, and to o certify. Should the TV not be repairable, ak a qualified ervice technician to dipoe of the TV. DISPOSAL OF THE TV Do not dipoe of the TV with general houehold wate. The LCD contain a mall amount of liquid crytal. The fluorecent tube ued in thi diplay alo contain mercury. Follow your local ordinance and regulation for dipoal. 8

9 Content Getting Started Baic Operation Uing the Menu Other Information Welcome to the World of...10 Connecting the TV...10 Cable Sytem and/or VHF/UHF Antenna Sytem...10 HD Cable Box/HD Satellite Box...11 Satellite Receiver and Cable/Antenna...12 VCR, Cable and Antenna...12 When Connecting to Optional Equipment...13 Intalling the TV...15 Preventing the TV from Toppling Over...15 Bundling the Connecting Cable...16 Adjuting the Viewing Angle of the TV...16 When Intalling on a Wall...17 Setting Up the Channel Lit Initial Setup...18 Remote Control...19 TV Control...22 Overview of MENU...23 Uing the Picture Setting...26 Uing the Sound Setting...28 Uing the Screen Setting...29 Uing the Setup Setting...31 Uing the PC Setting...36 Uing the Analog Setup Setting...37 Uing the Digital Setup Setting...38 Troublehooting...41 PC Input Signal Reference Chart...43 Specification...44 Index

10 Getting Started Welcome to the World of Connecting the TV Thank you for purchaing thi Sony LCD Digital Color Televiion. Thi manual i for model KDL-40V2500 and KDL-46V2500. The packing box contain acceorie that are lited on page 44. For optimum picture performance, your new BRAVIA TV i capable of receiving high definition programming through it integrated tuner. It i alo capable of receiving HDTV content from a cable or atellite box via the video input (HDMI and Y/PB/PR component video; ee page 14). To diplay clear, crip picture, your TV mut be connected properly. To properly connect your TV, follow the baic connection provided in thi ection. Advanced connection example are provided in the eparate Quick Setup Guide accompanied with your TV. The Quick Setup Guide provide a variety of optional equipment connection diagram. It i trongly recommended that you connect the antenna/cable input uing the upplied 75-ohm coaxial cable to receive optimum picture quality. A 300-ohm twin lead cable can be eaily affected by radio frequency, reulting in ignal deterioration. When the antenna/cable connection i done, you mut perform an Initial Setup o your TV will create a lit of channel you can view (ee page 18). After you can receive and view programming you hould elect the proper Wide Mode etting to diplay the picture in your preferred apect ratio. See Changing the Wide Screen Mode on page 21 and 29. Cable Sytem and/or VHF/UHF Antenna Sytem Connecting a cable ytem or an external VHF/UHF antenna to the VHF/UHF input will allow you to enjoy high definition and tandard definition digital programming (if available in your area) along with the tandard definition analog programming. Thi TV i capable of receiving uncrambled digital programming for both cable (QAM and 8VSB) and external VHF/UHF antenna (ATSC). Cable or VHF/UHF (or VHF only) 75-ohm coaxial cable (upplied) Rear of TV VHF/UHF input 10

11 Getting Started Cable and VHF/UHF (or VHF only) If you want to watch both cable and antenna (over-the-air) programming, you will need to ue an optional A-B RF Switch (not upplied) to witch between the cable and over-the air antenna programming, a hown. Cable Antenna A/B RF Switch A B Rear of TV VHF/UHF input Getting Started Be ure to et the Cable etting option to Cable On or Cable Off in the Setup etting for the type of input ignal you chooe (ee page 34). HD Cable Box/ HD Satellite Box You can alo enjoy high definition programming by ubcribing to high definition cable ervice or high definition atellite ervice. For the bet poible picture, make ure you connect thee component to your TV via the HDMI or component video (with audio) input on the back of your TV. 8 6 L RGB AUDIO R AUDIO 7 HDMI cable CATV/Satellite antenna cable PC IN VIDEO IN 1 S VIDEO IN HD/DVD IN (1080i/720p/480p/480i) Y PB DIGITAL OUT (OPTICAL) High Definition Cable Box/ High Definition Satellite Box IN OUT VIDEO L (MONO) AUDIO R PR L AUDIO R AUDIO OUT(VAR/FIX) Rear of TV AUDIO-R (red) AUDIO-L (white) Y (green) PB (blue) PR (red) Audio cable Component video cable Component video (Y, PB, PR) or HDMI connection i neceary to view 480i, 480p, 720p, 1080i, and 1080p (HDMI connection) format. Note that thi TV diplay all format type of picture in it native reolution of 1,920 dot 1,080 line. 11

12 Getting Started Satellite Receiver and Cable/Antenna Satellite Receiver Satellite antenna cable CATV/Antenna cable (upplied) VHF/UHF S VIDEO cable A/V cable S VIDEO VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) VIDEO IN 1 S VIDEO 3 VIDEO L (MONO) AUDIO R 4 Y HD/DVD IN (1080i/720p/480p/480i) PB PR L AUDIO R 5 DIGITAL OUT (OPTICAL) AUDIO OUT(VAR/FIX) Rear of TV If your atellite receiver i not equipped with S VIDEO, ue a VIDEO cable (yellow) intead of the S VIDEO cable. VCR, Cable and Antenna VCR CATV cable Antenna cable (upplied) VHF/UHF S VIDEO cable A/V cable SVIDEO VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) VIDEO IN 1 S VIDEO VIDEO L (MONO) AUDIO R 3 4 Y HD/DVD IN (1080i/720p/480p/480i) PB PR L AUDIO R 5 DIGITAL OUT (OPTICAL) AUDIO OUT(VAR/FIX) Rear of TV If your VCR i not equipped with S VIDEO, ue a VIDEO cable (yellow) intead of the S VIDEO cable. 12

13 Getting Started When Connecting to Optional Equipment Left ide VIDEO 2 IN S VIDEO 1 Rear 8 6 L RGB AUDIO 4 R AUDIO 7 56 Getting Started VIDEO L (MONO) R AUDIO 2 3 PC IN VIDEO IN 1 S VIDEO VIDEO L (MONO) AUDIO R IN HD/DVD IN (1080i/720p/480p/480i) Y PB PR L AUDIO R DIGITAL OUT (OPTICAL) AUDIO OUT(VAR/FIX) qa 0 9 q VHF/UHF For ervice ue only 7 8 qd Item 1 VIDEO 2 IN S VIDEO 2 VIDEO 2 IN VIDEO/ L (MONO)- R AUDIO 3 Headphone jack 4 PC IN 8 (RGB/AUDIO) Decription Connect to the S VIDEO output jack on your camcorder or other video equipment that ha S VIDEO. Provide better picture quality than compoite video (2). (See Auto YC on page 33.) Connect to the compoite video and audio output jack on your camcorder or other video equipment uch a video game equipment. If you have mono equipment, connect it audio output jack to the TV L (MONO) audio input jack. Connect to your headphone. If your headphone do not match the jack, ue a uitable plug adapter (not upplied). Connect to a peronal computer video output connector uing HD15-HD15 cable (analog RGB, upplied). Can alo be connected to other analog RGB device. See PC Input Signal Reference Chart on page 43 for the ignal that can be diplayed. For ome Apple Macintoh computer, it may be neceary to ue an adapter (not upplied). If thi i the cae, connect the adapter to the computer before connecting the HD15-HD15 cable. If the picture i noiy, flickering or not clear, adjut Phae and Pitch of the PC Setting on page 36. (Continued) 13

14 Getting Started Item 5 6 HDMI IN 6 HDMI/ R-AUDIO-L HDMI IN 7 HDMI Decription HDMI (High-Definition Multimedia Interface) provide an uncompreed, all-digital audio/video interface between thi TV and any HDMI-equipped audio/video equipment, uch a a et-top box, DVD player, and A/V receiver. HDMI upport enhanced, or high-definition video, plu digital audio. If the equipment ha a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN 6 (with HDMI-to-DVI cable or adapter) jack, and connect the audio jack to the AUDIO IN(L/R) jack of HDMI IN 6. (DVI connector i for video ignal only.) HDMI-to-DVI cable HDMI adapter Audio cable 7 VIDEO IN 1 S VIDEO 8 VIDEO IN 1/3 VIDEO/ L(MONO)- AUDIO-R 9 AUDIO OUT (VAR/FIX) 0 DIGITAL OUT (OPTICAL) qa HD/DVD IN 4/5 (1080i/720p/ 480p/480i)/ L-AUDIO-R Do not connect a PC to the TV HDMI input. Ue the PC IN (RGB IN) input intead when connecting a PC. HDMI connection i neceary to view 480i, 480p, 720p, 1080i and 1080p format. Note that thi TV diplay all format type of picture in a reolution of 1,920 dot 1,080 line. Be ure to ue only an HDMI cable that bear the HDMI logo. Connect to the S VIDEO output jack of your VCR or other video equipment that ha S VIDEO. S VIDEO provide better picture quality than compoite video (8). Connect to the compoite video and audio output jack on your A/V equipment uch a a VCR or other video equipment. A third compoite video and audio (VIDEO 2) i located on the left ide of the TV. Connect to the left and right audio input jack of your audio or video equipment. You can ue thee output to liten to your TV audio through your tereo ytem. Connect to the optical audio input of a digital audio equipment that i PCM/Dolby * digital compatible. (DIGITAL OUT (OPTICAL) i only available for digital channel.) Connect to your equipment component video (YPBPR) and audio (L/R) jack. Component video provide better picture quality than the S VIDEO (7) or the compoite video (8) connection. Component video (YPBPR) connection i neceary to view 480i, 480p, 720p, and 1080i format. Note that thi TV diplay all format type of picture in a reolution of 1,920 dot 1,080 line. q AC IN Connect the upplied AC power cord. qd VHF/UHF RF input that connect to your Cable or VHF/UHF antenna. * Manufactured under licene from Dolby Laboratorie. Dolby and the double-d ymbol are trademark of Dolby Laboratorie. 14

15 Getting Started Intalling the TV Preventing the TV from Toppling Over Attaching the Support Belt Getting Started TV tand tand 1 Screw the upport belt (upplied) to the TV tand with a wood crew (upplied). 2 Attach the upport belt to the tand with the ecuring crew (upplied) uing a coin, etc. 3 Adjut the length by pulling the upport belt toward you while holding the tand. Be ure to take meaure to prevent the TV from toppling over and cauing injury. The upplied wood crew may not be ued depending on the type of TV tand. In thi cae, or when the ecuring trength i not enough, ue commercial crew 3 to 4 mm (1/8 to 3/16 inche) diameter to fit to the TV tand. Conult your dealer about the type of crew. 15

16 Getting Started Bundling the Connecting Cable You can bundle the connecting cable a illutrated below Do not bundle the AC power cord with other connecting cable. Adjuting the Viewing Angle of the TV Thi TV can be adjuted within the angle hown below. Adjut the angle left and right (wivel) Top view Front When adjuting the angle, hold the tand with one hand to avoid lipping or tipping the TV. 16

17 Getting Started When Intalling on a Wall Thi TV can be intalled on a wall by uing a wall-mount bracket (old eparately). Be ure to ue the pecified Wall-Mount Bracket (ee page 3). Before mounting the TV on a wall, you mut remove the Table-Top Stand from the TV. Follow the tep below to remove the Table-Top Stand, and then refer to the intruction guide Intalling the Wall-Mount Bracket to prepare the intallation and mount the TV on the wall. Do not remove the Table-Top Stand for any reaon other than to wallmount the TV. Getting Started Follow the imple tep below to remove the Table-Top Stand: 1 Diconnect all the cable from the TV. 2 Place the TV, with it creen facing down, on a table, oft clothcovered work urface. 3 Rotate the cable holder by 90 degree, and pull it out. 4 Remove the four crew and the Table-Top Stand from the TV. For bracket intallation, refer to the intruction guide Intalling the Wall- Mount Bracket provided with the TV. Sufficient expertie i required in intalling thi TV, epecially to determine the trength of the wall for withtanding the TV weight. For product protection and afety reaon, Sony trongly recommend that you ue the Wall-Mount Bracket model deigned for your TV and the wall-mounting of your TV hould be performed by Sony dealer or licened contractor. Cable holder Soft cloth Table-Top tand Be ure to tore the removed crew and Table-Top Stand in a afe place until you are ready to reattach the Table-Top Stand. Keep the crew away from mall children. 17

18 Getting Started Setting Up the Channel Lit Initial Setup After you finih connecting the TV, you can run the Initial Setup to create a lit of available analog and digital channel. The Initial Setup creen appear when you turn on the TV for the firt time after hooking it up. POWER 1 Pre to turn on the TV. The Initial Setup creen appear. 2 Pre V/v to highlight the on-creen diplay language. Then pre. The meage Firt pleae connect cable/antenna. Do you want to tart Auto Program? appear. 3 Pre B/b to highlight OK then pre. The meage Auto Program appear. Then the meage Continue programming digital channel? appear. Thi may require 50+ minute for completion. 4 Pre B/b to highlight OK then pre. To run Auto Program again at a later time Ue the Auto Program feature a decribed on page 37 and 38. To add individual digital channel Ue the Digital Channel feature a decribed on page

19 Baic Operation Remote Control Button Decription 1 TV/VIDEO Pre repeatedly to cycle through the video input. See page 32 on etting up the video input label, including the Skip function. 2 SLEEP Pre repeatedly until the TV diplay the time in minute (Off, 15, 30, 45, 60, 90 or 120) that you want the TV to remain on before hutting off. To cancel Sleep Timer, pre SLEEP repeatedly until Off appear. 3 FREEZE Pre once to diplay a frozen image of the current program in a window. Pre again to return to the program. Baic Operation Freeze Frozen picture Current program With Freeze function active, ome function are unavailable, uch a MENU. 4 PICTURE Pre repeatedly to cycle through the available picture mode: Vivid, Standard, Cutom. The picture mode can be alo acceed in the Picture etting. For detail, ee Uing the Picture Setting on page GUIDE (Digital channel only) Pre to diplay the guide when you are watching digital channel (if it i available from the tation). Uing the Guide The guide allow you to elect the channel from a channel lit. The guide alo provide information about the current program being hown on each channel. z The 5 button and CH + have a tactile dot. Ue them a a reference when operating the TV. Information banner Channel lit Program option Make Way for Duck! Serie follow the aquatic miadventure of Henry and Riley, two wayward duck on a unique miion. C23.1 FAM Time remaining: 1:26 TV-G CC Alt. Audio 1 ABC 10 DISC 23.1 FAM 36 TLC 65 HIST 68 SHOW Alternate Audio Audio 1 Audio 2 Englih Englih (Continued) 19

20 Baic Operation qd Button Decription Program information in the guide i provided by the broadcater. A a reult, it may ometime include only the channel number, without a program title or decription qa q Uing the Program Option Setting The program option etting allow you to cutomize the program etting on the currently tuned channel. Each program ha a main video and audio tream (the video or audio that you ee or hear when the channel i firt tuned), and may have alternate tream. Thi option allow you to elect from the alternate audio tream, when the broadcater provide an alternate audio tream (for intance, the audio may contain a different language). 6 RETURN Pre to go back to the previou creen when diplaying MENU item and etting. 7 MENU Pre to diplay the MENU with TV function and etting. See Overview of MENU on page DIGITAL/ ANALOG Alternate Audio (When available) Pre to witch between analog and digital channel. To enjoy the digital feature of thi TV, pre DIGITAL/ANALOG ENT Pre 0-9 to elect a channel; the channel change after two econd. Pre ENT to change channel immediately. 0 Ue with the 0-9 and ENT button to elect digital channel. For example, to enter 2.1, pre 2,, 1 and ENT. qa VOL +/ Pre to adjut the volume. q MUTING Pre to mute the ound. Pre again or pre VOL + to retore the ound. qd POWER Pre to turn on and off the TV. 20

21 Baic Operation qf qg qh qj Button qf WIDE Decription Pre repeatedly to tep through the Wide Mode etting: Wide Zoom, Normal, Full, Zoom. The Wide Mode etting can be alo acceed in the Screen etting. See page 29. Changing the Wide Screen Mode (ee page 29 for detail) 4:3 Original ource Standard definition ource m Wide Zoom 16:9 Original ource High definition ource m Wide Zoom Baic Operation qk Normal Full Normal Thi mode i not available Full ql Zoom Zoom When the TV receive a 720p, 1080i or 1080p ignal, Normal cannot be elected. qg DISPLAY Pre once to diplay the current channel number, channel label, time and Wide Mode etting. The OSD (on creen diplay) will turn off after a few econd or pre again to immediately turn off the diplay. qh V/v/B/b Pre V/v/B/b to move the on-creen curor. Pre to elect/confirm an item. qj TOOLS Pre to diplay the Tool Menu that i aociated with your current input: Analog TV, Digital TV, External Input, and PC. Each input ha a different Tool Menu. (See page 26, 28, 31, 36 and 37.) Depending on the input ignal, menu you can elect may vary. qk JUMP Pre to jump back and forth between two channel. The TV alternate between the current channel and the lat channel that wa elected among the digital or analog channel. It will not cro over from digital to analog, or from analog to digital. ql CH +/ Pre to can through channel. To can quickly through channel, pre and hold down either +/. Inert two ize AA batterie (upplied) by matching the e and E on the batterie to the diagram inide the remote control battery compartment. Puh and lide to open 21

22 Baic Operation TV Control MENU TV/VIDEO VOLUME CHANNEL POWER 0 PIC OFF/TIMER STANDBY POWER Item Decription 1 MENU Pre to diplay MENU with TV function and etting (ee Overview of MENU on page 23). 2 Pre to cycle through the video input. If you et a certain input to Skip in Label Video TV/VIDEO Input, then the input will not appear. In the MENU creen, thi button erve to confirm the election or etting. 3 Pre to adjut the volume. In the MENU creen, thee button erve a left/right button. VOLUME + 4 Pre to can through channel. To can quickly through channel, pre and hold down either CHANNEL + /+. In the MENU creen, thee button erve a up/down button. 5 POWER Pre to turn on and off the TV. 6 (IR) Infrared Receiver/ Light Senor 7 PIC OFF/ TIMER LED Receive IR ignal from the remote control. Sene room light level and adjut the creen brightne accordingly (ee page 33 for detail). Do not put anything near the enor, a it function may be affected. Light up in green when the Picture Off feature i activated. Light up in orange when the timer i et. When the timer i et, thi LED will remain lit even if the TV i turned off. For detail, ee page STANDBY LED Light up in red when your TV i in PC tandby mode. If the LED blink in red continuouly, thi may indicate the TV need ervicing (ee contacting Sony information on page 2). 9 POWER LED Light up in green when the TV i turned on. 0 Speaker Output the audio ignal. The CHANNEL + button ha a tactile dot. Ue it a a reference when operating the TV. 22

23 Uing the Menu Overview of MENU MENU provide one-button acce for controlling your TV. It enable you to perform a variety of tak intuitively with a control panel on the creen rather than a variety of remote control button pree. When you pre the MENU button, you can elect from baic TV function uch a: witching between external input, viewing your favorite analog/digital tation, witching between analog and digital channel, and changing or cutomizing your TV etting. 2, 3 1 Pre MENU on the remote. The MENU control panel appear. 2 Pre V/v to highlight the item. 3 Pre to elect an option. Pre MENU to exit. MENU External Input Analog Favorite Digital Favorite Analog Digital Setting Uing the Menu 1 Select from connected equipment Select: Set: Exit: MENU (Continued) 23

24 Uing the Menu MENU External Input Decription The External Input feature let you elect the external input connected to your TV. You can alo aign a label uing Label Video Input in the Setup etting. (ee page 32) 1 Highlight External Input on the MENU control panel and pre. 2 Pre V/v to highlight the deired external input and pre. External Input Return Video 1 VCR Video 2 Game Video 3 - Video 4 - Video 5 - Video 6 - Video 7 - Video 8 - Edit Video Label Analog Favorite Digital Favorite Analog The Analog Favorite feature let you elect program from a lit of up to 16 favorite channel that you pecify. 1 Highlight Analog Favorite on the MENU control panel and pre. 2 Pre V/v to highlight the deired channel and pre. To add the current channel to the lit of Favorite Channel, follow tep 1 above then highlight and elect Add to Favorite and pre. To manually edit your lit of favorite channel, elect Edit Favorite. For more information, ee page 37. Add to Favorite can alo be acceed uing the TOOLS button on the remote control. The Digital Favorite feature let you create a lit of up to 16 favorite channel. To create your favorite lit: 1 Highlight Digital Favorite on the MENU control panel and pre. 2 Highlight Add to Favorite and pre to add the current channel to the lit of Favorite Channel. To add the current channel to the lit of Favorite Channel, follow tep 1 above then highlight Add to Favorite and pre. Select: Set: Exit: MENU Analog Favorite To edit your lit of favorite channel, follow tep 1 above then highlight and elect Edit Favorite. Reet will allow you to make the change and Surf will take you to the Favorite Channel lit. The Analog feature diplay the mot recently viewed analog channel. When tuned to the channel, the Channel number will be diplayed. Highlight Analog on the MENU control panel and pre. The Digital feature diplay the mot recently viewed digital channel. When tuned to the channel, the Program Banner and Channel number will be diplayed. Highlight Digital on the MENU control panel and pre. Select: Return Add to Favorite 1 28 : : : : : : : : Edit Favorite Set: Favorite Channel Add to Favorite Edit Favorite Exit Exit: MENU Exit: MENU Digital 24

25 Uing the Menu MENU Decription The Setting feature let you enter the etting menu. Setting and adjutment can be performed from the Setting menu. The information on variou etting tart from page 26. Setting Navigating Through Setting 1 Pre MENU. 2 Select. 3 Highlight the item: Picture, Sound, Screen, Setup, PC Setting, Analog Setup, Digital Setup. 4 Pre to elect an option. To exit Setting, pre MENU. The option you can adjut vary depending on the ituation. Unavailable option are grayed out or not diplayed. Uing the Menu 25

26 Uing the Menu Uing the Picture Setting Picture Analog A Target Input All Input Picture Mode Vivid Reet Backlight Max Picture Max Brightne 40 Color 60 Hue 0 Color Temperature Cool Sharpne 18 Noie Reduction Low Advanced Setting D Select: Set: Back: RETURN Exit: MENU Option Target Input Picture Mode (Except for PC input) Diplay Mode (For PC input only) Reet Backlight Picture Brightne Color Hue Color Temperature White adjutment Sharpne Decription Determine whether to apply the Picture etting to the current input only, or to all input. All Input Setting will be applied to All Input (ex: TV i howing Video 1. Change to the picture etting affect TV, Video 1 - Video 7). All Input will override any etting et by Current Input. Current Input Setting will be applied to only the Current Input (ex: TV i howing Video 1. Change to picture etting affect only Video 1). Vivid Select for enhanced picture contrat and harpne. Standard Select for tandard picture etting. Recommended for home entertainment. Cutom Allow you to tore your preferred etting. Picture Mode can alo be acceed uing the TOOLS button on the remote control. Video Select to view video image. Text Select to view text, chart or table. Diplay Mode can alo be acceed uing the TOOLS button on the remote control. Reet the current Picture Mode etting to the default value. Adjut to brighten or darken the backlight. Adjut to increae or decreae picture contrat. Adjut to brighten or darken the picture. Adjut to increae or decreae color intenity. Adjut to increae or decreae the green tone. Cool Select to give the white color a bluih tint. Neutral Select to give the white color a neutral tint. Warm 1,2 Select to give the white color a reddih tint. Available only when Picture Mode i et to Cutom. Adjut to harpen or often the picture. 26

27 Uing the Menu Option Noie Reduction Advanced Setting Available only when Picture Mode i et to Cutom Decription Select to reduce the noie level of connected equipment, and the VHF/UHF input. Select from Auto, High, Medium, Low and Off. Auto i only available when you are watching analog channel. It i not available when Target Input i et to All Input. Reet Reet all the advanced etting to the default value. Black Corrector Enhance black area of the picture for tronger contrat. Advanced C.E. (Advanced Contrat Enhancer) Gamma Clear White Live Color Color Space MPEG Noie Reduction Automatically optimize the backlight and contrat. Thi etting i epecially effective for dark image cene. It will increae the contrat ditinction of the darker picture cene. Adjut the balance between the light and dark area of the picture. Emphaize white and light color. Make color more vivid and reproduce clear kin tone. Ue to elect the range of color reproduction from Wide or Normal. Reduce the moaic effect in MPEG-compreed video. Ueful for Digital TV channel. If the function i et to High, it will reduce the harpne of the picture. Uing the Menu 27

28 Uing the Menu Uing the Sound Setting Sound Digital Target Input All Input Sound Mode Dynamic Reet Treble 0 Ba 0 Balance 0 Steady Sound Off Volume Offet Surround Off BBE High MTS A D Select: Set: Back: RETURN Exit: MENU Option Decription Target Input Determine whether to apply the Sound etting to the current input only, or to all input. All Input Setting will be applied to All Input (ex: TV i howing Video 1. Change to the ound etting affect TV, Video 1 - Video 8). All Input will override any etting et by Current Input. Current Input Setting will be applied to only the Current Input (ex: TV i howing Video 1. Change to ound etting affect only Video 1). Sound Mode Dynamic Select to enhance treble and ba. Standard Suitable for poken dialog. Cutom Flat etting. Allow you to tore your preferred etting. Sound Mode can alo be acceed uing the TOOLS button on the remote control. Reet Reet the current Sound Mode etting to the default value, except MTS. Treble Adjut to increae or decreae higher-pitched ound. Ba Adjut to increae or decreae lower-pitched ound. Balance Adjut to emphaize left or right peaker balance. Steady Sound On Select to tabilize the volume acro all program and commercial. Off Select to turn off Steady Sound. Volume Offet Adjut the volume level of the current input (TV or video input) relative to other input. Surround TruSurround XT Select for urround ound (for tereo program only). Simulated Stereo Add a urround-like effect to mono program. Off Select for normal tereo or mono reception. BBE Select to give ound more impact by compenating for phae effect in peaker. Select from High, Low, and Off. MTS Stereo Select for tereo reception when viewing a program broadcat in tereo. Enjoy tereo, bilingual and mono program Auto SAP Select to automatically witch the TV to econd audio program when a ignal i received. If no SAP ignal i preent, the TV remain in Stereo mode. Mono Select for mono reception. Ue to reduce noie during weak tereo broadcat. MTS i available only for analog program. 28

29 Uing the Menu Uing the Screen Setting Option Decription Target Input Determine whether to apply the Screen etting to the current input only, or to all input. All Input Setting will be applied to All Input (ex: TV i howing Video 1. Change to the creen etting affect TV, Video 1 - Video 7). All Input will override any etting et by Current Input. Current Input Setting will be applied to only the Current Input (ex: TV i howing Video 1. Change to creen etting affect only Video 1). Wide Mode Wide Zoom Select to fill the creen with minimum ditortion. Normal Select to diplay the 4:3 picture in it original ize when the original ource i 4:3. Normal i not available when you are watching 720p, 1080i or 1080p ource. Full Select to enlarge the picture horizontally to fill the creen when the original ource i 4:3 (Standard definition ource). When the original ource i 16:9 (High definition ource), elect thi mode to diplay the 16:9 picture in it original ize. Zoom Select to enlarge the original picture without ditorting the apect ratio. Auto Wide On Select to automatically change to the creen mode baed upon program content. If frequent creen change are diturbing to you, elect Off. Off Select to turn off the Auto Wide option. Chooe a creen mode from the Wide Mode option. 4:3 Default Select the default Screen Wide Zoom Select to enlarge the 4:3 picture, to fill the 16:9 creen, keeping the original image a much a poible. Mode to ue for 4:3 Normal Select to diplay the 4:3 picture in it original ize. ource Off Select to continue uing the current Wide Mode etting when the channel or input i changed. If 4:3 Default i et to anything but Off, the Wide Mode etting change only for the current channel. When you change channel (or input), Wide Mode i automatically replaced with the 4:3 Default etting for 4:3 ource. To retain the current Wide Mode etting a channel and input are changed, et 4:3 Default to Off. Uing the Menu (Continued) 29

30 Uing the Menu Option Decription Diplay Area Full Pixel Select to diplay the picture for 1080i or 1080p ource in it original ize when part of the picture are cut off. Normal Select to diplay the picture in it original ize. -1/-2 Select to enlarge the picture to hide the edge of the picture. Horizontal Center Allow you to move the poition of the picture left and right. Pre B/b and pre to adjut. Horizontal Center feature i ueful if the TV i connected to game equipment. Vertical Center Allow you to move the poition of the picture up and down. Available only in Zoom mode. Pre V/v and pre to adjut. Vertical Size Allow you to adjut the vertical ize of the picture. (Available only in Wide Zoom and Zoom mode.) Pre V/v and pre to adjut. 30

31 Uing the Menu Uing the Setup Setting Option Language Caption Viion Info Banner Decription Select to diplay all on-creen etting in your language of choice: Englih, Epañol, Françai. Allow you to elect from everal cloed caption mode (for program that are broadcat with cloed captioning). Some caption mode for digital channel are only acceible from the Digital Setup etting. For detail, ee page 39. Off Caption Viion i turned off. CC1, CC2, CC3, CC4 Diplay a printed verion of the dialog or ound effect of a program. (Should be et to CC1 for mot program.) Text1,Text2, Diplay network/tation information preented uing either half or the Text3,Text4 whole creen (if available). Caption Viion can alo be acceed uing the TOOLS button on the remote control. Set to On or Off. When On, diplay the program name and the program information (if the broadcater offer thi ervice). Diplay for few econd when the channel i changed or the DISPLAY button i preed. Uing the Menu (Continued) 31

32 Uing the Menu Option Parental Lock Label Video Input Decription The Parental Lock etting allow you to et up the TV to block program according to their content and rating level. Ue 0-9 on the remote control to enter a four-digit paword. The firt time you create a paword, confirm the paword by entering it again. Lock Off Turn Parental Lock off. No program are blocked from viewing. Child Maximum rating permitted are: U.S.: TV-Y, TV-G, G Canada: C, G, TV-Y Youth Maximum rating permitted are: U.S.: TV-PG, PG Canada: C8+, PG, 8 an+, TV-PG Young Adult Maximum rating permitted are: U.S.: TV-14, PG-13 Canada: 14+, 13 an+, TV-14 Cutom Select to et rating manually. U.S.: See page 34 for detail. Canada: See page 35 for detail. If you are not familiar with the Parental Guideline rating ytem, you hould elect Child, Youth, or Young Adult to help implify the rating election. To et more pecific rating, elect Cutom. Change Paword Select to change your paword. You need your paword for any future acce into the Parental Lock etting. If you loe your paword, ee Lot paword. on page 42. Select Country U.S.A. Select to ue U.S.A. rating (ee page 34). Canada Select to ue Canadian rating (ee page 35). Allow you to identify A/V equipment you connected to the TV, uch a a VCR, DVD, etc. For example, if you have a DVD player connected to the VIDEO 4 jack, you can elect the label DVD for the Video 4 input. Then when you pre TV/VIDEO to change input, the video label you aigned to that input appear on creen. 1 Pre V/v to highlight the video input (Video 1-8) to which you want to aign a label. Then pre to elect the input. 2 Pre V/v to highlight one of the diplayed label. Then pre to elect the label. You can elect from the following label for each input: Video 1-7, DVD, Cable Box, Satellite, BD, VCR, Receiver, DVR, Game, Camcorder, Edit, Skip Video 8, PC, Edit, Skip Edit allow you to create a cutom five-character label. If you elect Skip, your TV kip thi input when you pre the TV/VIDEO button. The Skip label i ueful for input to which no equipment i connected. 32

33 Uing the Menu Option Auto YC When connecting both VIDEO IN and S VIDEO IN, you can elect the jack from which the TV receive the input ignal. The TV i by default et to receive S VIDEO input ignal. 1 Pre TV/VIDEO repeatedly until the deired video input appear. 2 After electing the Auto YC option, to watch the picture input from the S VIDEO input jack: Pre V/v to highlight On, then pre. To watch the picture input from the VIDEO input jack: Pre V/v to highlight Off, then pre. Timer Setting Sleep Timer Set the time in minute (Off, 15 min, 30 min, 45 min, 60 min, 90 min, or 120 min) that you want the TV to remain on before hutting off automatically. Power Saving Light Senor Quiet Power On Decription Timer You can ue the Timer to turn the TV on, turn it off, and tune to a pecific channel at a cheduled time. The Timer feature will not be available until you et the Current Time. 1 Pre V/v to highlight one of the following option, then pre. Set: Select to et the timer by Day, Time, Duration, Channel and Volume Setup. Off: Select to turn off the timer. (Your previou etting are aved.) 2 If you elected Set in tep 1, pre V/v/B/b to et the day(), hour, minute, AM/PM, duration, channel number (VHF/UHF, CATV or Digital), and volume. When Digital i elected, the lat digital channel you viewed will automatically how when the TV i turned on. 3 Pre MENU to exit Setting. To return to the Timer Setting after programming the Timer or Current Time, pre B. Timer will be et to Off when: - Auto Program for analog channel i executed. - the AC power cord i diconnected and then reconnected to turn the TV on and the Current Time i diplayed a --: Select to et the current time (day, hour, minute, and AM/PM). 1 Pre to elect Current Time. 2 Pre V/v/B/b to et the current time (day, hour, minute, and AM/PM). Current Time 3 Pre MENU to exit Setting. Select to reduce the power conumption by adjuting the backlight brightne. Thi alo enhance the black level. Select from Off, Low, High and Picture Off. Select On to enable the automatic picture (creen) brightne control. The light enor meaure the room brightne which allow the TV to automatically adjut the backlight brightne baed on the picture etting and the ambient room light condition. Be ure not to put anything around the enor, a it function may be affected. In low light the range of the backlight control i reduced when Light Senor i et to On. Select to have the TV volume tart at the minimum volume and gradually change to the et level when you turn it on. Uing the Menu (Continued) 33

34 Uing the Menu Option Decription Speaker On Select to turn on the TV peaker. Off Select to turn off the TV peaker and liten to the TV ound only through your external audio receiver and peaker. Audio Out Variable Eay control of volume adjutment Fixed When Speaker i et to Off, the audio output from your audio ytem can be controlled by the TV remote control. When Speaker i et to Off, the audio output of the TV i fixed. Ue your audio receiver remote control to adjut the volume (and other audio etting) through your audio ytem. Cable On Select if you are receiving cable channel via cable TV provider. Off Select if you are uing an antenna. You hould run Auto Program after changing the Cable etting. Product Information Select to diplay the equipment information of your TV. US Model: Selecting Cutom Parental Lock Rating Option To elect cutom rating option for the U.S., elect U.S.A. in the Select Country etting (ee page 32). Option Decription Movie Rating G All children and general audience. PG Parental guidance uggeted. PG-13 Parental guidance for children under 13. R Retricted viewing, parental guidance i uggeted for children under 17. NC-17 and X No one 17 or under allowed. TV Rating Block program by their Age-Baed Rating TV-Y All children. rating, content or both TV-Y7 Directed to children age 7 and older. TV-G General audience. TV-PG Parental guidance uggeted. TV-14 Parent trongly cautioned. TV-MA Mature audience only. Content-Baed Rating FV Fantay violence. D Suggetive dialogue. L Strong language. S Sexual ituation. V Violence. To enure maximum blocking capability, et the Age-Baed Rating. Unrated Allow Allow program and movie that are broadcat without a rating. Block program or Block Block all program and movie that are broadcat without a rating. movie that are broadcat without a rating If you block unrated TV program, be aware that the following type of program may be blocked: program broadcat from another country, emergency broadcat, political program, port, new, public ervice announcement, religiou program and weather. 34

35 Uing the Menu Canadian Model: Selecting Cutom Parental Lock Rating Option To elect cutom rating option for Canada, elect Canada in the Select Country etting (ee page 32). Option Decription Englih Rating C All children. C8+ Children 8 year and older. G General programming. PG Parental guidance. 14+ Viewer 14 and older. 18+ Adult programming. French Rating G General programming. 8 an+ Not recommended for young children. 13 an+ Not recommended for age under an+ Not recommended for age under an+ Programming retricted to adult. U.S.A. Rating See US Model on page 34 for detail. Uing the Menu Viewing Blocked Program You can view blocked program by entering the paword. Pre ENT when tuned to a blocked program, then enter the paword. Thi temporarily turn the parental control feature off. To reactivate the Parental Lock etting, turn off the TV. When the TV i turned on again, your Parental Lock etting are reactivated. 35

36 Uing the Menu Uing the PC Setting PC Setting Video 8 Wide Mode Normal Reet Auto Adjutment Phae 0 Pitch 0 Horizontal Center 0 Vertical Center 0 Power Management Off A Reolution: 1024x 768/60Hz D Select: Set: Back: RETURN Exit: MENU Option Decription Wide Mode Normal Select to diplay in the original image ize. Full1 Select to enlarge the picture to fill the diplay area, keeping it original apect ratio. Full2 Select to enlarge the picture to fill the diplay area. Wide Mode can alo be acceed uing the WIDE button on the remote control. Reet Reet the current etting to the default value, except Wide Mode and Power Management. Auto Adjutment Select to automatically adjut the diplay poition and phae of the picture when the TV receive an input ignal from the connected PC. Note that Auto Adjutment may not work well with certain input ignal. In uch cae, manually adjut the option below. Auto Adjutment for PC can alo be et uing the TOOLS button on the remote control. Phae Adjut after Pitch to fine tune overall harpne. Pitch Adjut uneven harpne on creen. For the PC Input Signal Reference Chart, ee page 43. Horizontal Center Allow you to move the poition of the picture left and right. Pre B/b and pre to adjut. Vertical Center Allow you to move the poition of the picture up and down. Pre V/v and pre to adjut. Power Management On Select to automatically witch to the tandby mode when there i no ignal input for 30 econd. Off Select to turn off Power Management. Power Management i not VESA-compliant. 36

37 Uing the Menu Uing the Analog Setup Setting Option Favorite Channel Auto Program Show/Hide Channel Label Channel Decription Let you et up a lit of up to 16 of your favorite channel. 1 Pre V/v to highlight a Favorite Channel number (1-16) that you want to make your Favorite Channel, then pre to elect it. 2 Pre V/v to croll through the channel until you find the channel that you would like to add and then pre to elect it. To add other Favorite Channel number, repeat tep 1-2. To elect Favorite Channel number that you pecified, ee page 24. Favorite Channel for Analog TV can alo be et uing the TOOLS button on the remote control. Automatically et up the channel lit on the TV for all receivable channel. 1 Select Auto Program. 2 Select OK to tart Auto Program. When Auto Program i done, the Show/Hide Channel creen will appear. (See below) Allow you to how or hide channel that appear when you ue the CH +/ button. 1 Pre V/v to croll through the channel until you find the channel you want to how or hide. Then pre to elect it. 2 Pre V/v to determine if the channel will be hown or hidden. To how or hide more channel, repeat tep 1-2. Channel that you et to be hidden can be acceed only with the 0-9 button. Allow you to aign label (uch a tation call letter) to channel number. 1 Pre V/v to croll through the channel number. Then pre to elect the channel number that you want to aign a label. 2 Pre V/v to croll through the label character (A-Z, 0-9, etc.). Pre b to move to the next character. Repeat to add up to 5 character to the label. Pre b to highlight OK and pre to et. To aign label to more channel, repeat tep 1-2. Uing the Menu 37

38 Uing the Menu Uing the Digital Setup Setting Digital Setup Analog Digital Setup Highlight Digital Setup and pre. A D The Digital Setup option appear. Select: Set: Back: RETURN Exit: MENU Option Digital Channel Decription Favorite Channel Let you et up a lit of up to 16 of your favorite channel. 1 Pre V/v to highlight a favorite channel number (1-16) that you want to make your favorite channel. 2 Enter the number you wih to aign to the channel. Reet will remove the exiting favorite channel and Surf will take you to the favorite channel lit. To elect other favorite channel number, repeat tep 1-2. Digital Channel Add Select to add digital channel. Auto Program Show/Hide Channel Automatically et up the channel lit on the TV for all receivable digital channel. 1 Select Auto Program then Start. 2 Select OK to tart Auto Program. When Auto Program i done, elect OK. Allow you to how or hide channel that appear when you ue the CH +/ button. 1 Pre V/v to croll through the channel until you find the channel you want to how or hide. 2 Pre to determine if the channel will be hown or hidden. To how or hide more channel, repeat tep 1-2. Channel that you et to be hidden can be acceed only with the 0-9 button. Label Channel Allow you to aign label (uch a tation call letter) to channel number. 1 Pre V/v to croll through the channel number. Then pre to elect the channel number that you want to aign a label. 2 Pre V/v to croll through the label character (A-Z, 0-9, etc.). Pre b to move to the next character. Repeat to add up to 7 character to the label. Then pre to et it. To aign label to more channel, repeat tep