LCD Digital Color TV. Operating Instructions (1) 2006 Sony Corporation

Transcription

1 (1) LCD Digital Color TV Operating Intruction KDL-52XBR2 KDL-52XBR Sony Corporation

2 Owner Record The model and erial number are located at the rear of the TV. Record thee number in the pace provided below. Refer to them whenever you call upon your Sony dealer regarding thi product. Model No. Serial No. Pleae contact Sony directly if you: z z For Your Convenience Have quetion on the ue of your televiion after reading your manual Experience difficulty operating your televiion Contact Sony Cutomer Support at: or to peak with a upport repreentative: United State SONY (7669) 8:00 AM - 10:00 PM (EST) Mon - Fri 10:30 AM - 7:15 PM (EST) Sat - Sun Canada SONY (7669) 8:00 AM - 6:00 PM (Eatern) 8:00 AM - 5:00 PM (Wetern) Sony will work to reolve your quetion more quickly than your retailer or place of purchae. Pleae Do Not Return the Product to the Store 2

3 WARNING To reduce the rik of fire or electric hock, do not expoe thi apparatu to rain or moiture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR Thi ymbol i intended to alert the uer to the preence of uninulated dangerou voltage within the product encloure that may be of ufficient magnitude to contitute a rik of electric hock to peron. Thi ymbol i intended to alert the uer to the preence of important operating and maintenance (ervicing) intruction in the literature accompanying the appliance. The apparatu hall not be expoed to dripping or plahing and no object filled with liquid, uch a vae, hall be placed on the apparatu. CAUTION To prevent electric hock, do not ue thi polarized AC plug with an extenion cord, receptacle or other outlet unle the blade can be fully inerted to prevent blade expoure. Note on Caption Viion Thi TV provide diplay of TV cloed captioning in accordance with of the FCC rule. Declaration of Conformity Trade Name: SONY Model: KDL-52XBR2/KDL-52XBR3 Reponible Party: Sony Electronic Inc. Addre: Via Eprillo San Diego, CA U.S.A. Telephone Number: Thi device complie with part 15 of the FCC rule. Operation i ubject to the following two condition: (1) Thi device may not caue harmful interference, and (2) thi device mut accept any interference received, including interference that may caue undeired operation. NOTIFICATION Thi equipment ha been teted and found to comply with the limit for a Cla B digital device, puruant to Part 15 of the FCC Rule. Thee limit are deigned to provide reaonable protection againt harmful interference in a reidential intallation. Thi equipment generate, ue and can radiate radio frequency energy and, if not intalled and ued in accordance with the intruction, may caue harmful interference to radio communication. However, there i no guarantee that interference will not occur in a particular intallation. If thi equipment doe caue harmful interference to radio or televiion reception, which can be determined by turning the equipment off and on, the uer i encouraged to try to correct the interference by one or more of the following meaure: Reorient or relocate the receiving antenna. Increae the eparation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver i connected. Conult the dealer or an experienced radio/tv technician for help. For Cutomer in Canada Thi Cla B digital apparatu complie with Canadian ICES-003. Safety Operate the TV only on V AC. The plug i deigned, for afety purpoe, to fit into the wall outlet only one way. If you are unable to inert the plug fully into the outlet, contact your dealer. If any liquid or olid object hould fall inide the cabinet, unplug the TV immediately and have it checked by qualified ervice peronnel before operating it further. If you will not be uing the TV for everal day, diconnect the power by pulling the plug itelf. Never pull on the cord. For detail concerning afety precaution, ee Important Safety Intruction on page 4. Intalling Puruant to FCC regulation, you are cautioned that any change or modification not exprely approved in thi manual could void your authority to operate thi equipment. The TV hould be intalled near an eaily acceible power outlet. To prevent internal heat buildup, do not block the ventilation opening. Do not intall the TV in a hot or humid place, or in a place ubject to exceive dut or mechanical vibration. Avoid operating the TV at temperature below 41 F (5 C). If the TV i tranported directly from a cold to a warm location, or if the room temperature change uddenly, the picture may be blurred or how poor color due to moiture condenation. In thi cae, pleae wait a few hour to let the moiture evaporate before turning on the TV. To obtain the bet picture, do not expoe the creen to direct illumination or direct unlight. It i recommended to ue pot lighting directed down from the ceiling or to cover the window that face the creen with opaque drapery. It i deirable to intall the TV in a room where the floor and wall are not of a reflective material. CAUTION Ue the following Sony appliance() only with the following WALL-MOUNT BRACKET. Sony Wall-Mount Bracket Model No. Sony Appliance Model No. KDL-52XBR2 KDL-52XBR3 SU-WL51 Ue with other WALL-MOUNT BRACKET may caue intability and poibly reult in injury. To Cutomer Sufficient expertie i required for intalling the pecified product. Be ure to ubcontract the intallation to Sony dealer or licened contractor and pay adequate attention to afety during the intallation. For Cutomer in the United State Thi product contain mercury. Dipoal of thi product may be regulated if old in the United State. For dipoal or recycling information, pleae contact your local authoritie or the Electronic Indutrie Alliance ( Note Thi televiion include a QAM demodulator which hould allow you to receive uncrambled digital cable televiion programming via ubcription ervice to a cable ervice provider. Availability of digital cable televiion programming in your area depend on the type of programming and ignal provided by your cable ervice provider. (Continued) 3

4 Trademark Information TruSurround XT, SRS and ( ) ymbol are trademark of SRS Lab, Inc. TruSurround XT technology i incorporated under licene from SRS Lab, Inc. Manufactured under licene from BBE Sound, Inc. Licened by BBE Sound, Inc. under one or more of the following US patent: , BBE and BBE ymbol are regitered trademark of BBE Sound, Inc. Manufactured under licene from Dolby Laboratorie. Dolby and the double-d ymbol are trademark of Dolby Laboratorie. Macintoh i a trademark licened to Apple Computer, Inc., regitered in the U.S.A and other countrie. Blu-ray Dic i a trademark. BRAVIA and are trademark of Sony Corporation. Thi TV incorporate High-Definition Multimedia Interface (HDMI ) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademark or regitered trademark of HDMI Licening LLC. Important Safety Intruction 1) Read thee intruction. 2) Keep thee intruction. 3) Heed all warning. 4) Follow all intruction. 5) Do not ue thi apparatu near water. 6) Clean only with dry cloth. 7) Do not block any ventilation opening. Intall in accordance with the manufacturer intruction. 8) Do not intall near any heat ource uch a radiator, heat regiter, tove, or other apparatu (including amplifier) that produce heat. 9) Do not defeat the afety purpoe of the polarized or grounding-type plug. A polarized plug ha two blade with one wider than the other. A grounding type plug ha two blade and a third grounding prong. The wide blade or the third prong are provided for your afety. If the provided plug doe not fit into your outlet, conult an electrician for replacement of the obolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plug, convenience receptacle, and the point where they exit from the apparatu. 11) Only ue attachment/acceorie pecified by the manufacturer. 12) Ue only with the cart, tand, tripod, bracket, or table pecified by the manufacturer, or old with the apparatu. When a cart i ued, ue caution when moving the cart/apparatu combination to avoid injury from tip-over. 13) Unplug thi apparatu during lightning torm or when unued for long period of time. 14) Refer all ervicing to qualified ervice peronnel. Servicing i required when the apparatu ha been damaged in any way, uch a power-upply cord or plug i damaged, liquid ha been pilled or object have fallen into the apparatu, the apparatu ha been expoed to rain or moiture, doe not operate normally, or ha been dropped. 4

5 USE For the TV with a three-wire grounding type AC power cord plug (Cla 1 unit) Thi TV mut be connected to an AC power ocket outlet with a protective earthing connection. AC power cord If you damage the AC power cord, it may reult in a fire or an electric hock. If the AC power cord i damaged, top uing it and ak your dealer or Sony ervice center to exchange it. Do not place the TV where the power cord i ubject to wear or abue. Do not pinch, bend, or twit the cord exceively. The core line may be bared and cut, and caue a hort-circuit, reulting in a fire or an electric hock. Do not convert or damage the power cord. Do not allow anything to ret on or roll over the power cord. Do not pull the power cord. Do not move the TV with the power cord plugged in. Keep the power cord away from heat ource. Be ure to grap the plug when diconnecting the power cord. Wall outlet Do not ue a poor fitting outlet. Inert the plug fully into the outlet. If it i looe, it may caue arcing and reult in a fire. Contact your electrician to have the outlet changed. Wiring For your afety, unplug the AC power cord when wiring cable. Cable wiring Take care not to catch your feet on the cable. It may damage the TV. Electric hock Do not touch the AC power cord or the TV with a wet hand. If you plug/unplug the AC power cord from the TV with a wet hand, it may caue electric hock. Lightning For added protection for thi TV during a lightning torm, or when it i left unattended and unued for long period of time, unplug it from the wall outlet and diconnect the antenna. Thi will prevent damage to the receiver due to lightning and power line urge. ANTENNA Outdoor Antenna Grounding If an outdoor antenna i intalled, follow the precaution below. An outdoor antenna ytem hould not be located in the vicinity of overhead power line or other electric light or power circuit, or where it can come in contact with uch power line or circuit. WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL. Be ure the antenna ytem i grounded o a to provide ome protection againt voltage urge and built-up tatic charge. Section 810 of the National Electrical Code (NEC) in the USA and Section 54 of the Canadian Electrical Code in Canada provide information with repect to proper grounding of the mat and upporting tructure, grounding of the lead-in wire to an antenna dicharge unit, ize of grounding conductor, location of antenna dicharge unit, connection to grounding electrode, and requirement for the grounding electrode. Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70 BATTERIES Do not dipoe of batterie in a fire. Do not hort circuit, diaemble or overheat the batterie. Danger of exploion if battery i incorrectly replaced. Replace only with the ame or equivalent type. Dipoal of ued batterie To preerve our environment, dipoe of ued batterie according to your local law or regulation. CLEANING Electric ervice equipment Ground clamp NEC: National Electrical Code Clean the AC power plug regularly. If the plug i covered with dut and it pick up moiture, it inulation may deteriorate and reult in a fire. Unplug the AC power plug and clean it regularly. Unplug the AC power cord when cleaning thi TV. If not, it may reult in electric hock. Clean the cabinet of the TV with a dry oft cloth. To remove dut from the creen, wipe it gently with a oft cloth. Stubborn tain may be removed with a cloth lightly dampened with a olution of mild oap and warm water. Never ue trong olvent uch a thinner or benzine for cleaning. If uing a chemically pretreated cloth, pleae follow the intruction provided on the package. MAGNETIC INFLUENCE Thi TV contain a trong magnet in the peaker unit that generate a magnetic field. Keep any item uceptible to magnetic field away from the peaker. SOUND If a napping or popping ound from the TV i continuou or frequent while the TV i operating, unplug the TV and conult your dealer or ervice technician. It i normal for ome TV to make occaional napping or popping ound, particularly when being turned on or off. Antenna lead-in wire Antenna dicharge unit (NEC Section ) Grounding conductor (NEC Section ) Ground clamp Power ervice grounding electrode ytem (NEC Art 250 Part H) (Continued) 5

6 VENTILATION The lot and opening in the TV are provided for neceary ventilation. To enure reliable operation of the TV, and to protect it from overheating, thee lot and opening mut never be blocked or covered. Unle proper ventilation i provided, the TV may gather dut and get dirty. For proper ventilation, oberve the following: Do not intall the TV face up or down or ideway. Do not intall the TV turned over or upide down. Never cover the lot and opening with a cloth or other material. Never block the lot and opening by placing the TV on a bed, ofa, rug or other imilar urface. Never place the TV in a confined pace, uch a a bookcae or built-in cabinet, unle proper ventilation i provided. Object and ventilation hole Never puh object of any kind into the TV through the cabinet lot a they may touch dangerou voltage point or hort out part that could reult in a fire or an electric hock. Never pill liquid of any kind on the TV. Do not place any object on the TV. The TV hall not be expoed to dripping or plahing and no object filled with liquid, uch a vae, hall be placed on the TV. MOISTURE Moiture and flammable object Do not ue power-line operated et near water for example, near a bathtub, wahbowl, kitchen ink, or laundry tub, in a wet baement, or near a wimming pool, etc. It may reult in a fire or an electric hock. Do not let thi TV get wet. Never pill liquid of any kind on the TV. If any liquid or olid object doe fall through, do not operate the TV. It may reult in electric hock or damage to the TV. Have it checked immediately by qualified peronnel. To prevent fire, keep flammable object or open flame (e.g. candle) away from the TV. When intalling the TV on a wall, allow thi much pace: 4 inche (10 cm) 2 3/ 8 inche 11 7 / 8 inche (6 cm) (30 cm) 4 inche(10 cm) 4 inche (10 cm) When intalling the TV uing a tand, allow thi much pace: 11 7 / 8 inche (30 cm) CARRYING THE TV Carry the TV in the pecified manner To avoid dropping the TV and cauing eriou injury, be ure to follow thee guideline: Carrying the TV require at leat three people. When you carry the TV, place your hand a illutrated and hold it ecurely. When lifting or moving the TV, be ure to hold the panel firmly a illutrated. Place your palm directly under the panel, from the rear of the TV. Do not put tre on the frame around the creen. When tranporting the TV, do not ubject it to hock, vibration, or exceive force. 4 inche (10 cm) 4 inche (10 cm) 2 3/ 8 inche (6 cm) Never intall the TV a follow: Air circulation i blocked. Leave at leat thi much pace. Air circulation i blocked. 6

7 INSTALLATION When intalling or removing, uing the Wall-Mount Bracket, be ure to ue qualified contractor. Wall mount intallation require the ue of a Wall-Mount Bracket. If not properly ecured during intallation or removal from the Wall-Mount Bracket, the TV may fall and caue eriou injury. Pleae ue a qualified contractor when intalling or removing. Placement for viewing It i recommended to watch the TV at a ditance of 3-7 time that of the creen height, and in moderate brightne. Watching the TV for too long or in a dark room may caue eye fatigue. Optional wall mount Oberve the following when intalling the TV uing a wall-mount bracket. If the TV i not ecured properly, it may fall and caue injury. Be ure to follow the operating intruction upplied with the wall-mount bracket when intalling the TV. Be ure to attach the bracket upplied with the wall-mount bracket. Do not hang the TV from the ceiling. It may fall and caue eriou injury. Outdoor ue Do not intall thi TV outdoor. If the TV i expoed to rain, it may reult in a fire or an electric hock. If the TV i expoed to direct unlight, the TV may heat up and caue damage to the TV. Vehicle Do not intall thi TV in a vehicle. Bumping of the vehicle may caue the TV to fall down and caue injury. Ship and veel Do not intall thi TV in a hip or veel. If the TV i expoed to eawater, it may caue a fire or damage the TV. Corroion If you ue thi TV near the eahore, alt may corrode metal part of the TV and caue internal damage or fire. It may alo horten the life of the TV. Oil Do not intall thi TV in retaurant where oily vapor occur. Dut aborbing oil may enter and damage the TV. Medical intitution Do not place thi TV in a place where medical equipment i in ue. It may caue a malfunction of medical intrument. Placing on a table urface If you place the TV on an untable urface, the TV may fall and caue injury or damage. Fall Do not hang anything on the TV. The TV may fall from the tand or wall-mount, cauing damage or eriou injury. VOLUME ADJUSTMENT Adjut the volume o a not to trouble your neighbor. Sound carrie very eaily at night. Therefore, cloing the window or uing headphone i uggeted. When uing headphone, adjut the volume o a to avoid exceive level, a hearing damage may reult. LCD SCREEN Although the LCD creen i made with high-preciion technology and ha effective pixel of 99.99% or more, black dot or bright point of light (red, blue, or green) may appear contantly on the LCD creen. Thi i a tructural property of the LCD panel and i not a malfunction. Do not expoe the LCD creen urface to direct un light. Doing o may damage the LCD panel. Do not puh or cratch the LCD creen, or place object on top of the TV. The image may be uneven or the LCD panel may be damaged. If the TV i ued in a cold place, a mear may occur in the picture or the picture may become dark. Thi doe not indicate a failure. Thee phenomenon improve a the temperature rie. Ghoting may occur when till picture are diplayed continuouly. It hould diappear after a few moment. The creen and cabinet get warm when the TV i in ue. Thi i not a malfunction. Avoid praying inect repellent with volatile material on the creen. Avoid prolonged contact with rubber or platic made material. Broken piece Do not throw anything at the TV. The creen gla may break by the impact and caue eriou injury. Handling of broken gla and liquid crytal leakage If the LCD panel get damaged, crytalline liquid leakage may occur, or cattered broken gla may reult. Do not touch broken gla or crytalline liquid (which i toxic), with bare hand a cut or poioning/kin irritation may occur. Alo, do not let gla fragment or leaked crytalline liquid get into your eye or mouth. Should either contact your eye or mouth, rine the contacted area thoroughly with water and conult your doctor. Preventing the TV from toppling over Take meaure to prevent the TV from toppling over and cauing injury. To prevent the TV from toppling over, ecure the TV to a wall or pillar. Intalling on a level urface If you intall the TV on an inclined urface, the TV may fall or drop and caue injury or damage. (Continued) 7

8 SERVICING Damage requiring ervice If the urface of the TV crack, do not touch the TV until you unplug the AC power cord. Otherwie electric hock may reult. Servicing Do not attempt to ervice the TV yourelf ince opening the cabinet may expoe you to dangerou voltage or other hazard. Refer all ervicing to qualified ervice peronnel. Replacement part When replacement part are required, be ure the ervice technician certifie in writing that he/he ha ued replacement part pecified by the manufacturer that have the ame characteritic a the original part. Unauthorized ubtitution may reult in a fire, an electric hock or other hazard. Safety check Upon completion of any ervice or repair to the TV, ak the ervice technician to perform routine afety check (a pecified by the manufacturer) to determine that the TV i in afe operating condition, and to o certify. Should the TV not be repairable, ak a qualified ervice technician to dipoe of the TV. DISPOSAL OF THE TV Do not dipoe of the TV with general houehold wate. The LCD contain a mall amount of liquid crytal. The fluorecent tube ued in thi diplay alo contain mercury. Follow your local ordinance and regulation for dipoal. 8

9 Content Getting Started Baic Operation Uing the Menu Other Information Welcome to the World of TM...11 Connecting the TV...11 Cable Sytem and VHF/UHF Antenna Sytem...11 Cable Box/Digital Cable Box and Antenna...12 Cable Box/Digital Cable Box...12 Satellite Receiver and Cable/Antenna...13 VCR and Cable...14 VCR and Cable Box/Digital Cable Box...15 When Connecting to Optional Equipment...16 Intalling the TV...18 Preventing the TV from Toppling Over...18 Bundling the Connecting Cable...18 When Intalling on a Wall...19 Setting Up the Channel Lit Initial Setup...20 Remote Control...21 Programming the Remote Control...25 Uing Other Equipment with Your Remote Control...27 TV Control...30 Overview of MENU...31 Picture Setting...33 Sound Setting...35 Screen Setting...37 Channel Setting...39 Parental Lock Setting...40 Setup Setting...43 PC Setting...46 Troublehooting...48 PC Input Signal Reference Chart...51 Specification...52 Index

10

11 Getting Started Welcome to the World of Connecting the TV TM Thank you for purchaing thi Sony LCD Digital Color TV. Thi manual i for model KDL-52XBR2 and KDL-52XBR3. The packing box contain acceorie that are lited on page 52. To diplay clear crip picture, you mut connect your TV correctly and elect the correct Wide Mode to diplay the picture in the correct apect ratio (ee Changing the Wide Screen Mode on page 24). It i trongly recommended that you connect the antenna/cable input uing the upplied 75-ohm coaxial cable to receive optimum picture quality ignal. A 300-ohm twin lead cable can be eaily affected by radio noie and the like, reulting in ignal deterioration. If you ue a 300-ohm twin lead cable, keep it a far away from the TV a poible. You can alo connect a variety of optional equipment to your TV (ee page 16). For multiple equipment connection, pleae refer to the eparate Quick Setup Guide. Getting Started Cable Sytem and VHF/UHF Antenna Sytem Antenna cable CATV cable Pre ANT to witch between VHF/UHF and cable. 11

12 Getting Started Cable Box/Digital Cable Box and Antenna z To change channel uing the cable box, et your TV to channel 3 or 4 depending on the cable box channel output. Ue thi hookup if Your cable company cramble ome channel, uch a premium channel. Viewing all channel require a cable box. You do not intend to hook up any other audio or video equipment to your TV. CATV cable IN OUT Cable box Antenna cable Coaxial cable CABLE VHF/UHF Rear of TV To et up the TV remote control, ee Programming the Remote Control on page 25. Pre SAT/CABLE to begin operating the cable box with the remote control (ee page 27). The indicator will light up. Pre ANT to witch between VHF/UHF and cable. Cable Box/Digital Cable Box z To change channel uing the cable box, et your TV to channel 3 or 4 depending on the cable box channel output. Ue thi hookup if You ubcribe to a cable TV ytem that ue crambled or encoded ignal requiring a cable box to view all channel, and You do not intend to hook up any other audio or video equipment to your TV. CATV cable Coaxial cable CABLE Rear of TV IN O U T Cable box To et up the TV remote control, ee Programming the Remote Control on page 25. Pre SAT/CABLE to begin operating the cable box with the remote control (ee page 27). The indicator will light up. 12

13 Getting Started Satellite Receiver and Cable/Antenna Rear of TV S VIDEO VIDEO L (MONO) AUDIO R Y PB PR L AUDIO R RGB AUDIO DIGITAL OUT (OPTICAL) L AUDIO R CABLE VHF/UHF CATV cable Antenna cable Satellite receiver Getting Started S VIDEO VIDEO IN HD/DVD IN (1080p/1080i/720p/480p/480i) 9 PC IN VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) AUDIO OUT (VAR/FIX) A/V cable Satellite antenna cable S VIDEO cable If your atellite receiver i not equipped with S VIDEO, ue a VIDEO cable (yellow) intead of the S VIDEO cable. 13

14 Getting Started VCR and Cable Rear of TV Y RGB DIGITAL OUT (OPTICAL) CABLE S VIDEO PB VHF/UHF VIDEO L (MONO) AUDIO R PR L AUDIO R AUDIO L AUDIO R Coaxial cable VIDEO IN HD/DVD IN (1080p/1080i/720p/480p/480i) 9 PC IN AUDIO OUT (VAR/FIX) Splitter S VIDEO VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) VCR CATV cable Coaxial cable A/V cable S VIDEO cable If your VCR i not equipped with S VIDEO, ue a VIDEO cable (yellow) intead of the S VIDEO cable. 14

15 Getting Started VCR and Cable Box/ Digital Cable Box Rear of TV S VIDEO VIDEO L (MONO) AUDIO R VIDEO IN HD/DVD IN (1080p/1080i/720p/480p/480i) Y PB PR L AUDIO R 9 RGB AUDIO PC IN DIGITAL OUT (OPTICAL) L AUDIO R AUDIO OUT (VAR/FIX) S VIDEO CABLE VHF/UHF S VIDEO cable Coaxial cable Getting Started VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) VCR Splitter CATV cable A/V cable Coaxial cable z To change channel uing the cable box, et your TV to channel 3 or 4 depending on the cable box channel output. A/V cable Cable box Coaxial cable If your VCR i not equipped with S VIDEO, ue a VIDEO cable (yellow) intead of the S VIDEO cable. If you are connecting a digital cable box, you will need a pecial bidirectional plitter deigned to work with your cable box. 15

16 S VIDEO VIDEO L (MONO) AUDIO R IN 6 IN 7 L AUDIO R VIDEO IN Y PB PR L AUDIO R HD/DVD IN (1080p/1080i/720p/480p/480i) 9 RGB AUDIO PC IN DIGITAL OUT (OPTICAL) L AUDIO R AUDIO OUT (VAR/FIX) Getting Started When Connecting to Optional Equipment Left ide 1 7 IN IN R AUDIO L(MONO) VIDEO 3 VIDEO IN L AUDIO R IN Rear For ervice ue only CABLE VHF/UHF qd q 6 S VIDEO Y PB RGB DIGITAL OUT (OPTICAL) qa VIDEO PR L (MONO) AUDIO R L AUDIO R AUDIO L AUDIO R VIDEO IN HD/DVD IN (1080p/1080i/720p/480p/480i) PC IN AUDIO OUT (VAR/FIX) Item Decription 1 Headphone jack Connect to your headphone. If your headphone do not match the jack, ue a uitable plug adapter (not upplied). 2 VIDEO IN 2 R-AUDIO- L (MONO)/VIDEO 3 4 HDMI IN 3 HDMI IN 7/8 HDMI AUDIO IN/ L-R Connect to the compoite video and audio output jack on your camcorder or other video equipment uch a video game equipment. If you have mono equipment, connect it audio output jack to the TV L (MONO) audio input jack. HDMI (High-Definition Multimedia Interface) provide an uncompreed, all-digital audio/video interface between thi TV and any HDMI-equipped audio/video equipment, uch a a et-top box, Blu-ray Dic TM Player, DVD player, and A/V receiver. HDMI upport enhanced, or high-definition video, plu digital audio. If the equipment ha a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN 8 (with HDMI-to-DVI cable or adapter) jack, and connect the audio jack to the AUDIO IN(L/R) jack of HDMI IN 8. (DVI connector i for video ignal only.) 16

17 Getting Started Item Decription HDMI-to-DVI cable Be ure to ue only an HDMI cable that bear the HDMI logo. Do not connect a PC to the TV HDMI input. Ue the PC IN (RGB IN) input intead when connecting a PC. HDMI connection i neceary to view 480i, 480p, 720p, 1080i and 1080p format. Note that thi TV diplay all format type of picture in a reolution of 1,920 dot 1,080 line. 5 AC IN Connect the upplied AC power cord. 6 VIDEO IN 1 S VIDEO 7 VIDEO IN 1/4 VIDEO/L(MONO)- AUDIO-R Connect to the S VIDEO output jack of your VCR or other video equipment that ha S VIDEO. S VIDEO provide better picture quality than compoite video (7). Connect to the compoite video and audio output jack on your A/V equipment uch a a VCR or other video equipment. A third compoite video and audio jack (VIDEO 2) i located on the left ide of the TV. 8 HD/DVD IN 5/6 Connect to your equipment component video (YPBPR) and audio (L/R) jack. Component (1080p/1080i/720p video provide better picture quality than the S VIDEO (6) or the compoite video (7) 480p/480i)/ L-AUDIO-R connection. Component video (YPBPR) connection i neceary to view 480i, 480p, 720p, 1080i and 1080p format. Note that thi TV diplay all format type of picture in a reolution of 1,920 dot 1,080 line. 9 PC IN 9 (RGB/AUDIO) 0 AUDIO OUT (VAR/FIX) qa DIGITAL OUT (OPTICAL) HDMI adapter Audio cable Connect to a peronal computer video output connector uing HD15-HD15 cable (analog RGB, upplied). Can alo be connected to other analog RGB device. See PC Input Signal Reference Chart on page 51 for the ignal that can be diplayed. For ome Apple Macintoh computer, it may be neceary to ue an adapter (not upplied). If thi i the cae, connect the adapter to the computer before connecting the HD15-HD15 cable. If the picture i noiy, flickering or not clear, adjut the Phae and Pitch of the PC Setting a decribed on page 47. Connect to the left and right audio input jack of your audio or video equipment. You can ue thee output to liten to your TV audio through your tereo ytem. For detail, ee page 36. Connect to the optical audio input of digital audio equipment that i PCM/Dolby* digital compatible. (DIGITAL OUT (OPTICAL) i only available for digital channel.) q VHF/UHF Connect to your VHF/UHF antenna. qd CABLE Connect to your cable ignal. Thi CABLE input jack, in conjunction with the VHF/UHF input jack, let you et up your TV to witch between crambled channel (coming through a cable box) and uncrambled cable channel. For detail, ee page 11. VHF/UHF input receive over-the-air broadcat ignal frequencie and CABLE input receive CATV ignal frequencie. * Manufactured under licene from Dolby Laboratorie. Dolby and the double-d ymbol are trademark of Dolby Laboratorie. Getting Started 17

18 5 AUDIO PC IN L AUDIO R Getting Started Intalling the TV Preventing the TV from Toppling Over Attaching the Support Belt 1 Screw the upport belt (upplied) to the TV tand with a wood crew (upplied). 2 Attach the upport belt to the tand with the ecuring crew (upplied) uing a coin, etc. 3 Adjut the length by pulling the upport belt toward you while holding the TV tand. Be ure to take meaure to prevent the TV from toppling over and cauing injury. The upplied wood crew may not be ued depending on the type of TV tand. In thi cae, or when the ecuring trength i not enough, ue commercial crew 3 to 4 mm (1/8 to 3/16 inche) diameter to fit to the TV tand. Conult your dealer about the type of crew. Bundling the Connecting Cable You can bundle the connecting cable a illutrated below. Do not bundle the AC power cord with other connecting cable. 18

19 Getting Started When Intalling on a Wall Thi TV can be intalled on a wall by uing a wall-mount bracket (old eparately). Be ure to ue the pecified Wall-Mount Bracket (ee page 3). Before mounting the TV on a wall, you mut remove the Table-Top Stand from the TV. Follow the tep below to remove the Table-Top Stand, and then ue the intruction guide that came with the Wall-Mount Bracket (old eparately) to mount the TV on the wall. Do not remove the Table-Top Stand for any reaon other than to wallmount the TV. Follow the imple tep below to remove the Table-Top Stand: 1 Diconnect all the cable from the TV. 2 Start removing the crew from the one on top. (See illutration below) Do not remove any other crew from the TV. 3 When crew are removed, lift the TV out. Make ure that you carry out thi tak with two people. Do not attempt to lift the TV by yourelf. For bracket intallation, refer to the intruction guide provided by the Wall- Mount Bracket model for your TV. Sufficient expertie i required in intalling thi TV, epecially to determine the trength of the wall for withtanding the TV weight. For product protection and afety reaon, Sony trongly recommend that you ue the Wall-Mount Bracket model deigned for your TV and the wall-mounting of your TV hould be performed by Sony dealer or licened contractor. Getting Started Be ure to tore the removed crew and Table-Top Stand in a afe place until you are ready to reattach the Table-Top Stand. Keep the crew away from mall children. 19

20 Getting Started Setting Up the Channel Lit Initial Setup After you finih connecting the TV, you can run the Initial Setup to create a lit of available analog and digital channel. The Initial Setup creen appear when you turn on the TV for the firt time after hooking it up. 1 Pre to turn on the TV. The Initial Setup creen appear. 2 Pre V/v to highlight the on-creen diplay language. Then pre. The meage Start auto program now? appear. 3 Pre V/v to highlight Ye then pre. Auto Program performed through Initial Setup will automatically create a lit of receivable channel from both VHF/UHF antenna and cable TV channel if both ource are connected. If you chooe to et up the channel at a later time, elect the Auto Program option in the Channel etting to can available channel (ee page 39). If you elect No during Initial Setup, the Initial Setup creen will reappear each time you turn on the TV until you complete Auto Program. 20

21 Baic Operation Remote Control Button Decription 1 TV/VIDEO Pre repeatedly to cycle through the video input. See page 43 for information on etting up the video input label, including the Skip function. 2 SLEEP Pre repeatedly until the TV diplay the time in minute (Off, 15, 30, 45, 60, 90 or 120) that you want the TV to remain on before hutting off. To cancel Sleep, pre SLEEP repeatedly until Off appear. 3 FUNCTION Button The FUNCTION button indicator light up momentarily when preed to how which external equipment the remote control i operating. When the remote control i et to operate the external equipment, thee button will operate the equipment you chooe. You mut firt pre one of thee FUNCTION button to operate the correponding equipment. See page 25 for programming the remote control , ENT Pre 0-9 to elect a channel; the channel change after two econd. Pre ENT to change channel immediately. 5 Ue with the 0-9 and ENT button to elect digital channel. For example, to enter 2.1, pre 2,, 1 and ENT. 6 JUMP Pre to jump back and forth between two channel. The TV alternate between the current channel and the lat channel that wa elected. 7 ANT Pre to change between the VHF/UHF input and the CABLE input. 8 SURROUND Pre to elect TruSurround XT audio effect or Off to turn thi feature off. 9 SOUND Pre to cycle through different ound etting: Dynamic for enhanced treble and ba, Standard for poken dialog and Cutom for flat etting. Baic Operation The 5 button, CH + button and PLAY button have a tactile dot. Ue the tactile dot a a reference when operating the TV. Inert two ize AA (R6) batterie (upplied) by matching the e and E on the batterie to the diagram inide the remote control battery compartment., (Continued) 21

22 Baic Operation Button Decription 0 GUIDE Pre to diplay the guide when you are watching analog or digital channel. Uing the Guide The guide allow you to elect the channel from a channel lit. The guide alo provide information about the current program being hown on each channel (if information i available from the tation). Information banner Make Way for Duck! C23.1 1:26 Remaining TV-G V S L D Alt. Audio CC 1080i 16:9 FAM Serie follow the aquatic miadventure of Henry and Riley, two wayward duck on a unique miion. 1 ABC Channel lit 10 DISC 23.1 FAM 36 TLC 65 HIST 68 SHOW Alternate Audio Audio 1 Englih Audio 2 Englih Program option qa RETURN Program information in the guide i provided by the broadcater. A a reult, it may ometime include only the channel number, without a program title or decription. Uing the Program Option Setting The program option etting allow you to cutomize the program etting on the currently tuned channel. Alternate Audio Each program ha a main video and audio (When available) tream (the video or audio you ee or hear when the channel i firt tuned), and may have alternate tream. Thi option allow you to elect from the alternate audio tream, when the broadcater provide an alternate audio tream (for intance, the audio may contain a different language). Pre to go back to the previou creen when diplaying MENU item and etting. 22

23 Baic Operation Button q BD/DVD or DVR/VCR Operating Button qd VISUAL SEARCH qf MUTING qg VOL +/ qh DVR/VCR Record Button qj BD/DVD TOP MENU qk BD/DVD MENU ql POWER Decription When FUNCTION i witched on BD (Blu-ray Dic)/DVD or DVR/VCR, thee button operate the video equipment you have programmed into the remote control. For detail, ee Uing Other Equipment with Your Remote Control on page 27. &m PREV: Pre to replay the current program from the previou chapter mark (if any) or from the beginning of the live TV cache. REPLAY: Pre to replay the current program for a et period of time. ADVANCE: Pre to advance forward a et period of time when playing back a recorded program. M& NEXT: Pre to advance forward to the next chapter mark (if any) or to live TV when playing back a recorded program. m (fat revere): Pre to play a program in fat rewind mode. H PLAY: Pre to play a program at a normal peed. M (fat forward): Pre to play a program in fat forward mode. X PAUSE: Pre to paue playback. x STOP: Pre to top the playback of a recorded program. Only for Sony DVD recorder with the viual earch function. For detail, ee the operating intruction upplied with the DVD recorder. Pre to mute the ound. Pre again or pre VOL + to retore the ound. The MUTING function i not available when Speaker i et to Off, Audio Out i et to Fixed and the headphone are not connected. Pre to adjut the volume. z REC: Pre to record. Preing thi button alone tart the recording proce. X REC PAUSE: Pre to paue the recording. x REC STOP: Pre to top the recording. Pre to diplay the top menu of the DVD dic. Pre to diplay the DVD dic menu. For further information, refer to the operating manual of the connected equipment. Pre to turn on and off the external equipment elected from the FUNCTION button 3. w; TV POWER Pre to turn on and off the TV. wa FREEZE Pre once to diplay a frozen image of the current program. Pre again to return to the program. Baic Operation Current program in progre Frozen picture Freeze (Continued) 23

24 Baic Operation Button w PICTURE wd WIDE Decription Pre repeatedly to cycle through the available picture mode: Vivid, Standard, Cutom. The picture mode can be alo acceed in the Picture etting. For detail, ee Picture Setting on page 33. Pre repeatedly to tep through the Wide Mode etting: Wide Zoom, Normal, Full, Zoom. The Wide Mode etting can be alo acceed in the Screen etting. See page 37. Changing the Wide Screen Mode 4:3 Original ource Standard definition ource 16:9 Original ource High definition ource m Wide Zoom m Wide Zoom Normal Normal Full Full Zoom Zoom wf DISPLAY Pre once to diplay the current channel number, channel label, program-related information (if available), time, Wide Mode etting and remaining leep time (when Sleep i et, ee page 44). The OSD (on creen diplay) will turn off automatically in a few econd, or you can pre DISPLAY again to turn it off immediately. wg V/v/B/b Pre V/v/B/b to move the on-creen curor. Pre to elect/confirm an item. wh TOOLS Pre to diplay the Tool menu that i aociated with your current input: Picture Mode, Sound Mode, Wide Mode, Add to Favorite, Caption Viion (CC) and Alternate Audio. (See page 33, 35, 36, 37, 39 and 43.) The menu you can elect may vary depending on the input ignal. wj MENU Pre to diplay the MENU with TV function and etting. See Overview of MENU on page 31. wk CH +/ Pre to can through channel. To can quickly through channel, pre and hold down either +/. wl F1/F2 Pre to elect the function of connected component. For detail, ee Uing Other Equipment with Your Remote Control on page

25 Programming the Remote Control Baic Operation The remote control i preet to operate Sony brand video equipment. Sony Equipment BD/DVD DVR/VCR SAT/CABLE Programmable Code Number 101 (Sony Blu-ray Dic Player) 901 (Sony Dream Sytem) 801 (Sony Satellite Receiver) Follow the tep below to program your TV remote control to operate non- Sony video equipment. Find the three-digit code for your equipment from the Manufacturer Code lited on page 26. If more than one code number i lited, try entering from the code lited firt. 1 Pre and hold the, or FUNCTION button you want to BD/DVD DVR/VCR SAT/CABLE program on the remote control and pre the button imultaneouly. The elected FUNCTION button (BD/DVD, DVR/VCR or SAT/CABLE) will flah. 2 Enter the three-digit manufacturer code number uing the --9 button while the FUNCTION button i lit. If the code i not entered within 10 econd, you mut tart again from tep 1. 3 Pre the button while the FUNCTION button i lit. When the programming i correct, the elected FUNCTION button blink twice, and when not, blink five time. DISPLAY Baic Operation While, and button are labeled a uch, you can till BD/DVD DVR/VCR SAT/CABLE program any of your connected equipment uing any one of the button regardle of the label. For example, button can be programmed to BD/DVD operate your VCR. If you have a DVD/VCR combo that you want to operate with your TV remote control, you can program with the or BD/DVD or even the, but remember which button you have DVR/VCR SAT/CABLE programmed for your particular ue. To check if the code work Aim your TV remote control at the equipment, and pre the green button. If you can turn the equipment on and off by uing the remote control, then the programming i complete. If not, try the next code lited. If no code i input within the above pecified time, or an invalid or incorrect code number i input, the remote control automatically goe back to the previou etting. In ome cae, you may not be able to program your remote control to operate other equipment. In uch cae, ue the equipment own remote control. POWER 25

26 Baic Operation Manufacturer Code DVD Player Manufacturer Code Sony 751, 763 General 755 Electric/RCA Hitachi 758 JVC 756 Magnavox 757 Mitubihi 761 Oritron 759 Panaonic 753 Philip 757 Pioneer 752, 778 RCA/PROSCAN 755 Samung 758 Tohiba 754 Zenith 760, 762 DVD/VCR Combo Unit Manufacturer Code Sony 767 Brokonic 776 JVC 775 Panaonic 777 Samung 774 Tohiba 773 Zenith 768 HDD/DVD Combo Unit Manufacturer Code Sony 770, 771, 772 DVD Changer Manufacturer Code Sony 765 Panaonic 766 DVR Manufacturer Code Sony 901 Blu-ray Dic Player (BD) Manufacturer Code Sony 101, 102, ch DVD AV Sytem Manufacturer Code Sony (DAV) 601, 602, 603, 604 AV Receiver Manufacturer Code Sony 764 VCR Manufacturer Code Sony 301, 302, 303 (VHS, 8mm, Beta) 26 Manufacturer Code Sony DV 348 Admiral (M. Ward) 327 Aiwa* 338, 344 Audio Dynamic 314, 337 Brokonic 317, 319 Canon 308, 309 Citizen 332 Craig 302, 332 Curti Mathe 304, 309, 338 Daewoo 309, 312, 341 DBX 314, 336, 337 Dimenia 304 Emeron 316, 317, 318, 319, 320, 341 Fiher 330, 335 Funai 338 General Electric 304, 309, 329 Go Video 322, 339, 340 Goldtar 332 Hitachi 304, 305, 306, 338 Intant Replay 308, 309 JC Penney 304, 305, 309,314, 330, 336, 337 JVC 314, 336, 337, 345, 346, 347 Kenwood 314, 332, 336, 337 LG 332 LXI (SEARS) 305, 330, 332, 335, 338 Magnavox 308, 309, 310 Marantz 314, 336, 337 Marta 332 Memorex 309, 335 Minolta 304, 305 Mitubihi/MGA 323, 324, 325, 326 Multitech 321, 325, 338 NEC 314, 336, 337 Olympic 308, 309 Optimu 327 Orion 317 Panaonic 306, 307, 308, 309 Pentax 304, 305 Philco 308, 309 Philip 308, 309, 310 Pioneer 308 Quaar 306, 308, 309 RCA/PROSCAN 304, 305, 308, 309, 310, 311, 312, 313, 329 Realitic 309, 324, 328, 330, 335, 338 Sanui 314 Manufacturer Code Samung 313, 321, 322 Sanyo 330, 335 Scott 312, 313, 321, 323, 324, 325, 326, 335 Sharp 327, 328 Signature , 338 (M. Ward) SV Sylvania 308, 309, 310, 338 Symphonic 338 Tahiro 332 Tatung 314, 336, 337 Teac 314, 336, 337, 338 Technic 308, 309 Tohiba 311, 312 Ward 327, 328, 331, 332, 335 Yamaha 314, 330, 336, 337 Zenith 331 Cable Boxe Manufacturer Code Sony 230 Hamlin/Regal 222, 223, 224, 225, 226 Jerrold/ 201, 202, 203, 204, General Int./ 205, 206, 207, 208, Motorola 218, 222 Oak 227, 228, 229 Panaonic 219, 220, 221 Pioneer 211, 214, 215 Scientific Atlanta 209, 210, 211 Tocom 216, 217 Zenith 212, 213 Satellite Receiver Manufacturer Code Sony 801 Dih Network 810 Echotar 810 General Electric 802 Hitachi 805 Hughe 804 JVC 810 Mitubihi 809 Panaonic 803 Philip 811 RCA/PROSCAN 802, 808 Tohiba 806, 807 Samung 812 * If an Aiwa VCR doe not work even though you enter the code for Aiwa, enter the code for Sony intead.

27 Baic Operation Uing Other Equipment with Your Remote Control To operate other equipment connected to your TV, firt turn to page 26 and program the neceary code. For operating video equipment, pre TV/VIDEO repeatedly until you ee the video input on the creen for your connected equipment. Remote control tip are provided below. Operating a Cable Box Operating a Satellite Receiver Some function cannot be operated depending on the equipment. In that cae, operate by the remote control upplied with the equipment. To Do Thi... Pre... To Do Thi... Pre... Activate the remote control to operate Select a channel 0-9, ENT SAT/CABLE (FUNCTION) the cable box Change channel CH +/ Turn on/off POWER Back to previou channel JUMP Baic Operation To Do Thi... Pre... To Do Thi... Pre... Activate the remote control to operate Diplay channel number DISPLAY SAT/CABLE (FUNCTION) the atellite receiver Diplay SAT Guide GUIDE Turn on/off POWER Diplay SAT Menu MENU Select a channel 0-9, ENT Move highlight (curor) V v B b Change channel CH +/ Back to previou channel JUMP Select item Operating a VCR To Do Thi... Pre... To Do Thi... Pre... Activate the remote control to operate Record z DVR/VCR (FUNCTION) the VCR Play H Turn on/off POWER Stop x INPUT SELECT TV/VIDEO Fat forward M Select a channel 0-9, ENT Rewind the tape m Change channel CH +/ Paue Operating a DVD Player or DVD Changer To Do Thi... Pre... To Do Thi... Pre... Activate the remote control to operate the DVD BD/DVD (FUNCTION) Step through different track of the dic X (pre again to reume normal playback) m to fat revere or M to fat forward the dic when preed during playback Turn on/off POWER If you have a DVD changer, to kip dic F1 Step through different chapter of the dic > to tep forward or. to tep backward Play H Select a track directly 0-9, ENT Stop x Diplay the dic menu or top menu BD/DVD MENU or TOP MENU Paue X (pre again to reume normal playback) Operate the DVD menu V v B b, Diplay the ytem MENU MENU (Continued) 27

28 Baic Operation Operating a Blu-ray Dic Player (BD) To Do Thi... Pre... To Do Thi... Pre... Activate the remote control to operate the Blu-ray Dic Player Operating a 5.1ch DVD AV Sytem (Sony DAV) Operating a DVD/VCR Combo Unit BD/DVD (FUNCTION) Step through different track of the dic m to fat revere or M to fat forward the dic when preed during playback Turn on/off POWER Diplay the POP UP menu (BD) BD/DVD MENU Play H Diplay the dic menu (DVD) BD/DVD MENU Stop x Diplay the top menu (BD) BD/DVD TOP MENU Paue X (pre again to reume normal playback) Diplay the top menu (DVD) BD/DVD TOP MENU Operate the menu V v B b, To Do Thi... Pre... To Do Thi... Pre... Activate the remote control to operate the DVD Turn on/off Select other equipment connected to the DAV BD/DVD (FUNCTION) POWER F1 Stop Paue Search the picture forward or backward Specify the previou chapter/track Specify the next chapter/track x X M or m during playback Dik kip F2 Move highlight (curor) V v B b Diplay the dic menu or top menu BD/DVD MENU or TOP MENU Select item Select a track directly 0-9, ENT Mater volume VOL +/, MUTING Play H To Do Thi... Pre... To Do Thi... Pre... Activate the remote control to operate the DVD/VCR Turn on/off Select the DVD Select the VCR DVR/VCR (FUNCTION) POWER F 1 F 2. > Search the picture forward or backward M or m during playback Move highlight (curor) and elect (DVD) Diplay the dic menu or top menu BD/DVD MENU or TOP MENU Record (VCR) z Play H Change channel (VCR) V v B b CH +/ or 0-9, ENT (uing tuner) Stop x Adjut tracking (VCR) CH +/ (during tape playback) Paue X Index earch. > INPUT SELECT TV/VIDEO 28

29 Baic Operation Operating a HDD/DVD Combo Unit To Do Thi... Pre... To Do Thi... Pre... Activate the remote control to operate Record z the DVD/HDD DVR/VCR (FUNCTION) Record top x Turn on/off POWER Record paue X Select the HDD Select the DVD Operating an AV Receiver Operating a DVR F 1 F 2 Specify the previou chapter/track Specify the next chapter/track Play H Replay Stop x Advance Paue X Diplay the dic menu or top menu BD/DVD MENU or TOP MENU Search the picture forward or backward M or m during playback INPUT SELECT TV/VIDEO Move highlight (curor) V v B b and elect To Do Thi... Pre... To Do Thi... Pre... Activate the remote control to operate the AV Receiver Turn on/off. > DVR (FUNCTION) Mater volume VOL +/, MUTING POWER Select other input connected to AV receiver To Do Thi... Pre... To Do Thi... Pre... Activate the remote control to operate the DVR DVR/VCR (FUNCTION) Jump forward to the next available chapter Turn on/off POWER Stop x Play H Paue X Jump back while viewing live or recorded program REPLAY Record z Slow mode m/m (pre lightly) Record top x Jump forward while viewing recorded program Record paue X F1 > Baic Operation 29

30 MENU POWER CHANNEL VOLUME TV/VIDEO PIC OFF/TIMER STANDBY POWER Baic Operation TV Control POWER CHANNEL 1 2 VOLUME 3 q; MENU TV/VIDEO 4 5 PIC OFF/TIMER STANDBY POWER Item Decription 1 POWER Pre to turn on and off the TV. 2 Pre to can through channel. To can quickly through channel, pre and hold down either CHANNEL +/ /+. In the MENU creen, thee button erve a up/down button. 3 Pre to adjut the volume. In the MENU creen, thee button erve a left/right button. VOLUME +/ 4 Pre to cycle through the video input. If you et a certain input to Skip in Label Video TV/VIDEO Input, then the input will not appear. For detail, ee page 43. In the MENU creen, thi button erve a confirming the election or etting. 5 MENU Pre to diplay MENU with TV function and etting (ee Overview of MENU on page 31). 6 PIC OFF/TIMER LED Light up in green when Picture Off i activated. Light up in orange when the timer i et. When the timer i et, thi LED will remain lit even if the TV i turned off. For detail, ee page STANDBY LED Light up in red when your TV i in the PC tandby mode. If the LED blink in red continuouly, thi may indicate the TV need ervicing (ee contacting Sony information on page 2). 8 POWER LED Light up in green when the TV i turned on. 9 (IR) Infrared Receiver/Light Senor Receive IR ignal from the remote control. Do not put anything near the enor, a it function may be affected. q; Speaker Output the audio ignal. The CHANNEL + button ha a tactile dot. Ue it a a reference when operating the TV. 30