PT-RZ575 S P E C F I L E. 1-Chip DLP Projectors. As of August Specifications and appearance are subject to change without notice.

Size: px

Start display at page:

Download "PT-RZ575 S P E C F I L E. 1-Chip DLP Projectors. As of August Specifications and appearance are subject to change without notice."

Ashlee Burke
6 years ago
Views:

1 S P E C F I L E Product Number : Product Name : PTRZ575 1Chip DLP Projectors As of August Specifications and appearance are subject to change without notice. 111

2 1Chip DLP TM Projector PTRZ575 Specifications Main unit Power supply Power consumption BTU value DLP chip Lens Light Source size Brightness* 2 Panel size Display method Pixels Centertocorner uniformity* 2 Contrast* 2 Resolution Scanning frequency HDMIDVID RGB YPBPR (YCBCR) VideoSVideo AC V 50Hz60Hz 500W (520VA) NORMAL: 375W ECO: 350W SILENT: 350W LONG LIFE1: 220W LONG LIFE 2: 185W LONG LIFE 3: 160W SHUTTER: 40W *Operating Temperature: 25 C (77 F), Altitude: 700m (2,297ft), ICE627087: 2008 Broadcast contents, Picture mode: Standard, Dynamic contrast [ON] 0.5 W with STANDBY MODE set to ECO* 1, 10 W with STANDBY MODE set to Normal (22 W with STANDBY MODE in AUDIO SETTING set to ON andquick STARTUP function disabled, 50 W with QUICK STARTUP function enabled). Max 1,706 BTU 17.0 mm (0.67 in) diagonal (16:10 aspect ratio) DLP chip 1, DLP system 2,304,000 ( ) 1, total of 2,304,000 pixels FixedFocus Lens (0.8:1), Auto focus, F 1.75, f 11.9 mm Laser Diode Laser class 1 Luminance life for set: 20,000 hours at half luminance (NORMALSILENT) 24,000 hours at half luminance (Eco) * Temperature: 35 C (95 F), Altitude 700m (2,297ft), Dust: 0.15mgm 3 43,800 hours at constant luminance (LONG LIFE1) 61,320 hours at constant luminance (LONG LIFE2) 87,600 hours at constant luminance (LONG LIFE3) m (40300 inches) 5,200 lumens (Center)* 2 5,000 lumens* 2 (NORMAL) 4,160 lumens (Center) 4,000 lumens (ECOSILENT) 2,200 lumens (Half luminance) 1,600 lumens (Constant luminance) (LONG LIFE1) 1,700 lumens (Half luminance) 1,300 lumens (Constant luminance) (LONG LIFE2) 1,300 lumens (Half luminance) 1,000 lumens (Constant luminance) (LONG LIFE3) 90% 20,000:1(full onfull off, dynamic contrast ON) pixels fh: kHz, fv: Hz, dot clock: MHz 525i (480i)* 3, 625i (576i)* 3, 525p (480p), 625p (576p), 750 (720)60p, 750 (720)50p, 1125 (1080)60i, 1125 (1080)50i, 1125 (1080)25p, 1125 (1080)24p, 1125 (1080)24sF, 1125 (1080)30p, 1125 (1080)60p, 1125 (1080)50p, VGA (640 x 400) WUXGA (1920 x 1200) compatible with noninterlaced signals only fh: kHz, fv: Hz, dot clock: MHz 525i (480i): fh khz; fv 4 Hz, 625i (576i): fh khz; fv 50 Hz, 525p (480p): fh 0 khz; fv 60 Hz, 625p (576p): fh khz; fv 50 Hz, 750 (720)60p: fh khz; fv 60 Hz, 750 (720)50p: fh khz; fv 50 Hz, 1125 (1080)60i: fh khz; fv 60 Hz, 1125 (1080)50i: fh khz; fv 50 Hz, 1125 (1080)25p: fh khz; fv 25 Hz, 1125 (1080)24p: fh 0 khz; fv 24 Hz, 1125 (1080)24sF: fh 0 khz; fv 48 Hz, 1125 (1080)30p: fh khz; fv 30 Hz, 1125 (1080)60p: fh khz; fv 60 Hz, 1125 (1080)50p: fh khz; fv 50 Hz fh: khz, fv: 4 Hz [NTSCNTSC4.43PALMPAL60] fh: khz, fv: 50 Hz [PALPALNSECAM] As of August

3 1Chip DLP TM Projector PTRZ575 Geometry correction range Only [KEYSTONE] used [KEYSTONE] and [CURVED] used together Only [CURVED] used Vertical keystone correction angle α ( ) Horizontal keystone correction angle β ( ) Vertical keystone correction angle α ( ) Horizontal keystone correction angle β ( ) Min. value of R2L2 Min. value of R3L3 Min. value of R2L2 Min. value of R3L3 ±25 ±20 ±8 ± [VERTICAL KEYSTONE] (viewed from the side) [HORIZONTAL KEYSTONE] (viewed from above) Vertical arc correction (viewed from the side) Projection distance Arc radius Horizontal arc correction (viewed from above) Projection distance Arc radius Arc center Arc center Projection distance Arc radius Projection distance Arc radius Optical axis shift Installation Terminals Vertical: 4.4%, +4.4(powered) Horizontal: 2.1%, +2.1%(powered Ceilingfloor, frontrear, 360 degree free installation COMPUTER 1 IN Dsub HD 15pin (female) 1 R,G,B: 0.7 Vpp, 75 ohms, (G: 1.0 Vpp, 75 ohms for sync on G) HDVD, SYNC: TTL, high impedance, positivenegative automatic Y, PB, PR Y: 1.0 Vpp (including sync signal), PBPR(CBCR): 0.7 Vpp, 75 ohms YC Y: 1.0 Vpp (including sync signal), C: Vpp, 75 ohms COMPUTER 2 IN1 OUT Dsub HD 15pin (female) 1 R,G,B: 0.7 Vpp, 75 ohms, (G: 1.0 Vpp, 75 ohms for sync on G) HDVD, SYNC: TTL, high impedance, positivenegative automatic Y, PB, PR Y: 1.0 Vpp (including sync signal), PBPR(CBCR): 0.7 Vpp, 75 ohms DVID IN DVID 24pin x 1, DVI 1.0 compliant, compatible with HDCP, for single link only HDMI IN 1HDMI IN 2 HDMI 19pin 2, Deep Color, compatible with HDCP, Audio signal: linear PCM (sampling frequencies: 48 khz, 44.1 khz, 32 khz) VIDEO IN Pin jack 1, 1.0 Vpp, 75 ohms AUDIO IN 1 Pin jack 2(LR) 0.5 Vrms, input impedance: 22 kilohms or more AUDIO IN 2AUDIO IN 3 M3 (L, R) 1, 0.5 Vrms, input impedance: 22 kilohms or more VARIABLE AUDIO OUT M3 1 (monitor out, stereo) Vrms, variable, output impedance: 2.2 kilohms or less SERIAL IN D Sub 9 p 1, for external control (RS232C compliant) DIGITAL LINKLAN RJ45 x 1, for network, DIGITAL LINK connection (HDBaseT compatible), 100BaseTX,compatible with ArtNet, PJLink (class 1), Deep Color, HDCP LAN RJ45 x 1 for network connection 10Base T100BaseTX, compatible with ArtNet, PJLink DC OUT USB Type A 1, for power supply (DC5 V, max 900 ma) As of August

4 1Chip DLP TM Projector PTRZ575 Power cord length Cabinet materials Dimensions (W H D) Weight Operation noise Operating temperature Operating humidity Storage temperature Storage humidity Remote control unit Power supply Operation range Dimensions (W H D) Weight* 5 Supplied accessories Optional accessories Attachment for ceiling mount bracket Ceiling mount bracket Early Warning Software Digital interface box Digital Switcher DSubSVIDEO conversion cable 3.0 m (9 ft 10 in) Molded plastic 498 x 168* 4 x 481mm ( x 658* 4 x in ) with supplied lens Approx. 16.6kg (36.6 lbs) 28 db (Silent), 33 db (NormalEco) 045 C (32113 F)* 6 10%80% (no condensation) at less than 4,200 m (13,780 ft.) above sea level 20 C60 C (4 140 F) 10%80% 3 V DC (R03AAA type battery 2) Approx. 30 m (98 ft 5 in) when operated from directly in front of the signal receptor mm ( in) Approx. 102 g (3.6 oz) including batteries Power cord with secure lock (x 1) (x 2 for EU models) Wirelesswired remote control unit ( 1) Batteries for remote control (R03AAA type 2) Software CDROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) ( 1) ETPKD130B ETPKD120H (for high ceilings) ETPKD120S (for low ceilings) ETSWA100* ETYFB100G ETYFB200G ETADSV * The symbol at the end of the part number will vary depending on the type of license. *1 When the STANDBY MODE is set to Eco, network functions such as power on over the LAN will not operate *2 Measurement, measuring conditions, and method of notation all comply with ISO international standards *3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal) *4 with legs at shortest position *5 Average value. May differ depending on models *6 The operating environment temperature should be between 0 C (32 F) and 40 C (104 F) if the projector is used at an altitude between 1,400m (4,593ft) and 4,200m (13,780ft) above sea level. When the OPERATING MODE is set to [ECO] or [SILENT], the projector cannot be used at an altitude of 2,700m (8,858ft) or higher above sea level. As of August

5 1Chip DLP TM Projector PTRZ575 Dimensions unit : mm (inch) (6716) 155 (6332) 168 (658) 164 (6916) 90 (31732) 74 (22932) 21 (1316) 460 (1818) 481 (181516) 5 (316) 498 (191932) 249 (91316) 420 (161732) 210 (8932) Terminals Video input 2 Computer 1 input 3 Computer 2 inputoutput 4 DVID input 5 HDMI 1 output 6 HDMI 2 input 7 DIGITAL LINK connector 8 LAN connector 9 Audio 1 input 10 Serial input 11 Audio 2 input 12 Audio 3 input 13 Audio output 14 USB connector As of August

6 1Chip DLP TM Projector PTRZ575 Standard settingup position (If using other than the ETDLE030) E Upper edge of projected image Mounting on the ceiling ø60.5 (238) * ( ) * ( ) Illustrations show the projector installed using optional ceiling mount bracket ETPKD120H, optional bracket assembly ETPKD130B. * Adjustable in 40 mm (1916 in) steps. L Projected image 21 (1316) (62932) (11732) unit : mm (inch) Projected image Setting on a deskfloor L E Lower edge of projected image NOTE: L 100 (31516) 370 (14916) Illustrations show the projector installed using optional ceiling mount bracket ETPKD120H, optional bracket assembly ETPKD130B. Projected image 100 (31516) 259 (10316) This illustration is not drawn to scale. Caution: All construction work should be done by a qualified technician. When mounting to the ceiling, use the special mounting bracket. Furthermore, in order to prevent it from falling down from the ceiling, use the supplied wire on the mounting bracket. Projection distance for 16:10 aspect ratio screen unit: meters (feet) Projection size [diagonal] Projection distance [L] Height from the edge of screen to center of lens [H] 1.02 m 1.27 m 1.52 m 1.78 m 2.03 m 2.29 m (2.1) (2.7) (3.3) (3.9) (4.4) (5.0) 0.26 (0.9) 0.32 (1.0) 0.39 (1.3) 0.45 (1.5) 0.51 (1.7) 0.58 (1.9) 2.54 m 3.05 m 3.81 m 5.08 m 6.35 m 7.62 m (5.6) (6.7) (8.5) (11.3) (14.2) (17.1) 0.64 (2.1) 0.77 (2.5) 0.97 (3.2) 1.29 (4.2) 1.61 (5.3) 1.93 (6.3) 0.28 (0.9) 0.35 (1.1) 0.42 (1.4) 0.49 (1.6) 0.56 (1.8) 0.63 (2.1) 0.70 (2.3) 0.84 (2.8) 1.05 (3.4) 1.41 (4.6) 1.76 (5.8) 2.11 (6.9) As of August

7 1Chip DLP TM Projector PTRZ575 Projection distance for 16:9 aspect ratio screen unit: meters (feet) Projection size [diagonal] Projection distance [L] Height from the edge of screen to center of lens [H] 1.02 m 1.27 m 1.52 m 1.78 m 2.03 m 2.29 m 2.54 m 3.05 m 3.81 m 5.08 m 6.35 m 7.62 m (2.2) (2.8) (3.4) (4.0) (4.6) (5.2) (5.7) (6.9) (8.7) (11.6) (14.6) (17.6) (0.8) (1.0) (1.2) (1.4) (1.6) (1.8) (2.0) (2.3) (2.9) (3.9) (4.9) (5.9) (0.9) (1.1) (1.3) (1.5) (1.7) (1.9) (2.1) (2.6) (3.2) (4.3) (5.3) (6.4) Projection distance for 4:3 aspect ratio screen unit: meters (feet) Projection size [diagonal] Projection distance [L] Height from the edge of screen to center of lens [H] 1.02 m 1.27 m 1.52 m 1.78 m 2.03 m 2.29 m 2.54 m 3.05 m 3.81 m 5.08 m 6.35 m 7.62 m (2.5) (3.1) (3.7) (4.4) (5.1) (5.7) (6.3) (7.6) (9.6) (12.9) (16.1) (19.4) (1.0) (1.2) (1.4) (1.7) (1.9) (2.2) (2.4) (2.9) (3.6) (4.8) (6.0) (7.2) (1.0) (1.3) (1.6) (1.8) (2.1) (2.4) (2.6) (3.1) (3.9) (5.2) (6.5) (7.8) The value for L (distance to screen) varies slightly within ±5%. When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size. The brightness varies depending on the zoom setting. Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance. Aspect ratio 16:10 L (m) = (diagonal screen size in inches) Aspect ratio 16:9 L (m) = (diagonal screen size in inches) Aspect ratio 4:3 L (m) = (diagonal screen size in inches) Distances calculated with the above equations will include a slight error. As of August

8 1Chip DLP TM Projector PTRZ575 Shift range Optical axis shift function allows to shift the position of a projected image as shown below V 0.021H Projected image width H 0.021H Standard projection postition 0.044V Projected image height V Installable angle Install the projector at an angle within the range shown below. FULL 360degree projection Vertical 360deg. Horizontal 360deg. Tilting 360deg. (V&H combination) As of August

9 1Chip DLP TM Projector PTRZ575 List of compatible signals The following table specifies the video signals compatible with the projector. This projector supports the signal with in the compatible signal column. NOTE: The native resolution of this projector is pixels. If the display resolution of the input signal is different from the native resolution, image compression or expansion will be used to convert the input signal to a level within the native resolution. 2D compatible signal "NTSCNTSC4.43 PALMPAL60" PALPALNSECAM 480i 576i 480i 576i 480p 576p 72060p 72050p i * i p sF p p p p 640 x x x x x x x x x x x x x x x x x x Resolution (Dots) 720 x 480i 720 x 576i 712x483i 702x575i 720(1440) x 480i *1 720(1440) x 576i *1 720 x x 576 i i i 640 x x x x x x x x x x x x x x x x x x 870 Scanning freq. H V (KHz) (Hz) Dot clock freq. (MHz) VIDEO Input terminal YC COMPUTER (COMPUTER1) 2 DVID HDMI12 DIGITAL LINK As of August

10 1Chip DLP TM Projector PTRZ575 2D compatible signal 1280 x x x x x x x x x x x x x x x x x x x x x RB 1920 x Resolution (Dots) 1280 x x x x x x x x x x x x x x x x x x x x x x x x Scanning freq. H V (KHz) (Hz) Dot clock freq. (MHz) VIDEO Input terminal YC COMPUTER (COMPUTER1) 2 DVID HDMI12 DIGITAL LINK *1 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal) *2 When 1125(1035)60i signal input, it displays as 1125(1080)60i signals. *3 Compliant with VESA CVTRB (Coordinated Video TimingReduced Blanking). *4 Image resolution is reduced by the image processing circuit before projection. As of August

11 1Chip DLP TM Projector PTRZ575 Notes on projector placement and operation Prevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and exhaust) of the projector. Do not stack projectors on top of each other. Do not block the ventilation ports (intake and exhaust) of the projector. 500mm(20")or longer 500mm(20")or longer 500mm(20")or longer 100mm(4")or longer Do not install the projector in a confined space. When installing the projector in a confined space, provide air conditioning or ventilation separately. Exhaust heat may accumulate when the ventilation is not enough, triggering the protection circuit of the projector. As of August

PT-EZ590 S P E C F I L E. LCD Projectors. As of March Specifications and appearance are subject to change without notice. 1/14.

PT-EZ590 S P E C F I L E. LCD Projectors. As of March Specifications and appearance are subject to change without notice. 1/14. S P E C F I L E Product Number : Product Name : PTEZ590 LCD Projectors As of March 2016. Specifications and appearance are subject to change without notice. 1/14 PTEZ590 Specifications Main unit Power